--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h	Thu Mar 07 15:06:43 2019 +0100
@@ -0,0 +1,428 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of ADC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Exported Types
+  * @{
+  */
+   
+/** 
+  * @brief  ADC Configuration injected Channel structure definition
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+  *          - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+  *            AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+  * @note   The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+  *         ADC state can be either:
+  *          - For all parameters: ADC disabled
+  *          - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
+  *          - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
+  */
+typedef struct 
+{
+  uint32_t InjectedChannel;               /*!< Selection of ADC channel to configure
+                                               This parameter can be a value of @ref ADC_channels
+                                               Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+  uint32_t InjectedRank;                  /*!< Rank in the injected group sequencer
+                                               This parameter must be a value of @ref ADCEx_injected_rank
+                                               Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t InjectedSamplingTime;          /*!< Sampling time value to be set for the selected channel.
+                                               Unit: ADC clock cycles
+                                               Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+                                               This parameter can be a value of @ref ADC_sampling_times
+                                               Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                        If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                               Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+                                                     sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                                     Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+  uint32_t InjectedOffset;                /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+                                               Offset value must be a positive number.
+                                               Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+                                               this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+  uint32_t InjectedNbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+                                               To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                               This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                               Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                               Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                               This parameter can be set to ENABLE or DISABLE.
+                                               Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t AutoInjectedConv;              /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+                                               This parameter can be set to ENABLE or DISABLE.      
+                                               Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+                                               Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+                                               Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+                                                     To maintain JAUTO always enabled, DMA must be configured in circular mode.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;         /*!< Selects the external event used to trigger the conversion start of injected group.
+                                               If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+                                               If set to external trigger source, triggering is on event rising edge.
+                                               This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
+                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+                                                     If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConvEdge;     /*!< Selects the external trigger edge of injected group.
+                                               This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+                                               If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef; 
+
+/** 
+  * @brief ADC Configuration multi-mode structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode. 
+                                   This parameter can be a value of @ref ADCEx_Common_mode */
+  uint32_t DMAAccessMode;     /*!< Configures the Direct memory access mode for multi ADC mode.
+                                   This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+  uint32_t TwoSamplingDelay;  /*!< Configures the Delay between 2 sampling phases.
+                                   This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Common_mode ADC Common Mode
+  * @{
+  */ 
+#define ADC_MODE_INDEPENDENT                  0x00000000U
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT    ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG      ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT              ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT                ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL                   ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG                ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT  ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig    ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT            ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL                 ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
+  * @{
+  */ 
+#define ADC_DMAACCESSMODE_DISABLED  0x00000000U                /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1         ((uint32_t)ADC_CCR_DMA_0)  /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2         ((uint32_t)ADC_CCR_DMA_1)  /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3         ((uint32_t)ADC_CCR_DMA)    /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
+  * @{
+  */ 
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE           0x00000000U
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING         ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING        ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING  ((uint32_t)ADC_CR2_JEXTEN)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
+  * @{
+  */ 
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4           0x00000000U
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO          ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1           ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2           ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3           ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15         ((uint32_t)ADC_CR2_JEXTSEL)
+#define ADC_INJECTED_SOFTWARE_START                ((uint32_t)ADC_CR2_JEXTSEL + 1U)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_injected_rank ADC Injected Rank
+  * @{
+  */ 
+#define ADC_INJECTED_RANK_1    0x00000001U
+#define ADC_INJECTED_RANK_2    0x00000002U
+#define ADC_INJECTED_RANK_3    0x00000003U
+#define ADC_INJECTED_RANK_4    0x00000004U
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_channels  ADC Specific Channels
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+    defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+    defined(STM32F412Cx)
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_16)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx ||
+          STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F413xx) || defined(STM32F423xx)
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18)
+#endif /* STM32F413xx || STM32F423xx */
+
+#if defined(STM32F411xE) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) 
+#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
+#endif /* STM32F411xE || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */ 
+
+
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+  * @brief Disable internal path of ADC channel Vbat
+  * @note  Use case of this macro:
+  *        On devices STM32F42x and STM32F43x, ADC internal channels
+  *        Vbat and VrefInt share the same internal path, only
+  *        one of them can be enabled.This macro is to be used when ADC 
+  *        channels Vbat and VrefInt are selected, and must be called 
+  *        before starting conversion of ADC channel VrefInt in order 
+  *        to disable ADC channel Vbat.
+  * @retval None
+  */
+#define __HAL_ADC_PATH_INTERNAL_VBAT_DISABLE() (ADC->CCR &= ~(ADC_CCR_VBATE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Macros ADC Private Macros
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+    defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||
+          STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18)  || \
+                                 ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT)                 || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)   || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG)     || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT)             || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT)               || \
+                           ((MODE) == ADC_DUALMODE_INTERL)                  || \
+                           ((MODE) == ADC_DUALMODE_ALTERTRIG)               || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig)   || \
+                           ((MODE) == ADC_TRIPLEMODE_INJECSIMULT)           || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT)             || \
+                           ((MODE) == ADC_TRIPLEMODE_INTERL)                || \
+                           ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+                                      ((MODE) == ADC_DMAACCESSMODE_1)        || \
+                                      ((MODE) == ADC_DMAACCESSMODE_2)        || \
+                                      ((MODE) == ADC_DMAACCESSMODE_3))
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE)    || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING)  || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \
+                                        ((INJTRIG) == ADC_INJECTED_SOFTWARE_START))
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= 4U))
+
+/**
+  * @brief  Set the selected injected Channel rank.
+  * @param  _CHANNELNB_ Channel number.
+  * @param  _RANKNB_ Rank number. 
+  * @param  _JSQR_JL_ Sequence length.
+  * @retval None
+  */
+#define   ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_)  (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_))))
+
+/**
+  * @brief Defines if the selected ADC is within ADC common register ADC123 or ADC1
+  * if available (ADC2, ADC3 availability depends on STM32 product)
+  * @param __HANDLE__ ADC handle
+  * @retval Common control register ADC123 or ADC1
+  */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define ADC_COMMON_REGISTER(__HANDLE__)                ADC123_COMMON
+#else
+#define ADC_COMMON_REGISTER(__HANDLE__)                ADC1_COMMON
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx || STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/