Mercurial > public > ostc4

diff Discovery/Src/base.c @ 422:b67327177159 ImprovmentNVM_2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Moved Timeout handling out of 100ms callback: Handling of the timeout is not timecritical and may be done in the main loop. This was needed because writing of flash data shall be done before going to sleep. Having this function in the timer callback would raise the risk of flash inconsitencies due to parallel calls out of the main loop => Created a separate function containing the old timeout detection functionality
author ideenmodellierer
date Mon, 10 Feb 2020 19:29:12 +0100
parents b3ab85121e4d
children b1091e183d52
line wrap: on
line diff
--- a/Discovery/Src/base.c	Mon Feb 10 19:25:09 2020 +0100
+++ b/Discovery/Src/base.c	Mon Feb 10 19:29:12 2020 +0100
@@ -230,6 +230,7 @@
 #include "test_vpm.h"
 #include "tDebug.h"
 #include "motion.h"
+#include "data_exchange_main.h"
 
 #ifdef DEMOMODE
 #include "demo.h"
@@ -262,6 +263,8 @@
 TIM_HandleTypeDef   TimDemoHandle; /* used in stm32f4xx_it.c too */
 #endif
 
+static uint8_t RequestModeChange = 0;
+
 static uint8_t LastButtonPressed;
 static uint32_t LastButtonPressedTick;
 static uint32_t BaseTick100ms;			/* Tick at last 100ms cycle */
@@ -300,6 +303,8 @@
 static void TriggerButtonAction(void);
 static void EvaluateButton(void);
 static void RefreshDisplay(void);
+static void TimeoutControlRequestModechange(void);
+static void TimeoutControl(void);
 
 /* ITM Trace-------- ---------------------------------------------------------*/
 /*
@@ -495,6 +500,8 @@
 	        DoDisplayRefresh = 0;
         	RefreshDisplay();
 
+        	TimeoutControl();								/* exit menus if needed */
+
         	if(stateUsed->mode == MODE_DIVE)			/* handle motion events in divemode only */
         	{
 				switch(settingsGetPointer()->MotionDetection)
@@ -583,23 +590,11 @@
         return;
     }
 #endif
-    static uint8_t last_base;
-
     SStateList status;
-    uint32_t timeout_in_seconds;
-    uint32_t timeout_limit_Surface_in_seconds;
-
+    _Bool modeChange = 0;
 
     BaseTick100ms = HAL_GetTick();	/* store start of 100ms cycle */
 
-    _Bool InDiveMode = 0;
-    _Bool modeChange = 0; // to exit from menu and logbook
-
-    if(stateUsed->mode == MODE_DIVE)
-        InDiveMode = 1;
-    else
-        InDiveMode = 0;
-
     EvaluateButton();
 
     if(returnFromCommCleanUpRequest)
@@ -652,132 +647,11 @@
         break;
     }
 
-    /* timeout control */
-    if(modeChange) ///< from RTE, set in data_exchange_main.c
-        time_without_button_pressed_deciseconds = (settingsGetPointer()->timeoutSurfacemode / 4) * 3;
-    if(status.base != last_base)
-        time_without_button_pressed_deciseconds = 0;
-    last_base = status.base;
-    timeout_in_seconds = time_without_button_pressed_deciseconds / 10;
-    time_without_button_pressed_deciseconds += 1;
-    if(modeChange || (timeout_in_seconds != time_without_button_pressed_deciseconds / 10))
+    get_globalStateList(&status);
+    if(modeChange)
     {
-#ifdef NO_TIMEOUT
-        timeout_in_seconds = 0;
-#else
-        timeout_in_seconds += 1;
-#endif
-
-        if(InDiveMode)
-        {
-            switch(status.base)
-            {
-            case BaseHome:
-                if((status.line != 0) && (timeout_in_seconds  >= settingsGetPointer()->timeoutEnterButtonSelectDive))
-                {
-                    set_globalState(StD);
-                    timeout_in_seconds = 0;
-                }
-            break;
-
-            case BaseMenu:
-                if((status.line == 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuDive) || modeChange))
-                {
-                    exitMenu();
-                    timeout_in_seconds = 0;
-                }
-                if((status.line != 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuEdit) || modeChange))
-                {
-                    exitMenuEdit_to_Home();
-                    timeout_in_seconds = 0;
-                }
-            break;
-            default:
-                break;
-            }
-        }
-        else /* surface mode */
-        {
-            switch(status.base)
-            {
-            case BaseHome:
-                // added hw 161027
-                if(!(stateRealGetPointer()->warnings.lowBattery) && (stateRealGetPointer()->lifeData.battery_charge > 9))
-                {
-                    stateRealGetPointerWrite()->lastKnownBatteryPercentage = stateRealGetPointer()->lifeData.battery_charge;
-                }
-                else if((wasFirmwareUpdateCheckBattery) && (timeout_in_seconds > 3))
-                {
-                    wasFirmwareUpdateCheckBattery = 0;
-                    setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); // added 170306
-                    if(	(settingsGetPointer()->lastKnownBatteryPercentage > 0)
-                    && 	(settingsGetPointer()->lastKnownBatteryPercentage <= 100)
-                    && 	(stateRealGetPointer()->warnings.lowBattery))
-                    {
-                        setBatteryPercentage(settingsGetPointer()->lastKnownBatteryPercentage);
-                    }
-                }
-                // stuff before and new @161121 CCR-sensor limit 10 minutes
-                if((settingsGetPointer()->dive_mode == DIVEMODE_CCR) && (settingsGetPointer()->CCR_Mode == CCRMODE_Sensors))
-                {
-                    timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemodeWithSensors;
-                }
-                else
-                {
-                    timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemode;
-                }
-                if(timeout_in_seconds  >= timeout_limit_Surface_in_seconds)
-                {
-                    gotoSleep();
-                }
-                break;
-            case BaseMenu:
-                if((status.line == 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuSurface) || modeChange))
-                {
-                    exitMenu();
-                    timeout_in_seconds = 0;
-                }
-                if((status.line != 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuEdit) || modeChange))
-                {
-                    if((status.page != (uint8_t)((StMPLAN >> 24) & 0x0F)) || (timeout_in_seconds  >= 10*(settingsGetPointer()->timeoutMenuEdit)))
-                    {
-                        exitMenuEdit_to_Home();
-                        timeout_in_seconds = 0;
-                    }
-                }
-                break;
-
-            case BaseInfo:
-                if((timeout_in_seconds  >= settingsGetPointer()->timeoutInfo) || modeChange)
-                {
-                    if(status.page == InfoPageLogList)
-                    {
-                        exitLog();
-                        timeout_in_seconds = 0;
-                    }
-                    else
-                    if(status.page == InfoPageLogShow)
-                    {
-                        show_logbook_exit();
-                        exitLog();
-                        timeout_in_seconds = 0;
-                    }
-                    else
-                    if(status.page != InfoPageCompass)
-                    {
-                        exitInfo();
-                        timeout_in_seconds = 0;
-                    }
-                }
-                break;
-            default:
-                break;
-            }
-        }
+    	TimeoutControlRequestModechange();
     }
-
-    get_globalStateList(&status);
-
     if(status.base == BaseComm) /* main loop not serviced in com mode */
     {
     	tComm_refresh();
@@ -1045,6 +919,7 @@
     /* not at the moment of testing */
 //	ext_flash_erase_firmware_if_not_empty();
     GFX_logoAutoOff();
+    ext_flash_write_devicedata(true);	/* write data at default position */
     set_globalState(StStop);
 }
 
@@ -1754,6 +1629,155 @@
     HAL_NVIC_SystemReset();
 }
 
+static void TimeoutControlRequestModechange(void)
+{
+	RequestModeChange = 1;
+}
+
+static void TimeoutControl(void)
+{
+    static uint8_t last_base;
+
+    SStateList status;
+    uint32_t timeout_in_seconds;
+    uint32_t timeout_limit_Surface_in_seconds;
+    _Bool InDiveMode = 0;
+
+    get_globalStateList(&status);
+
+    if(stateUsed->mode == MODE_DIVE)
+    {
+        InDiveMode = 1;
+    }
+    else
+    {
+        InDiveMode = 0;
+    }
+	/* timeout control */
+	if(RequestModeChange) ///< from RTE, set in data_exchange_main.c
+		time_without_button_pressed_deciseconds = (settingsGetPointer()->timeoutSurfacemode / 4) * 3;
+	if(status.base != last_base)
+		time_without_button_pressed_deciseconds = 0;
+	last_base = status.base;
+	timeout_in_seconds = time_without_button_pressed_deciseconds / 10;
+	time_without_button_pressed_deciseconds += 1;
+	if(RequestModeChange || (timeout_in_seconds != time_without_button_pressed_deciseconds / 10))
+	{
+	#ifdef NO_TIMEOUT
+		timeout_in_seconds = 0;
+	#else
+		timeout_in_seconds += 1;
+	#endif
+
+		if(InDiveMode)
+		{
+			switch(status.base)
+			{
+			case BaseHome:
+				if((status.line != 0) && (timeout_in_seconds  >= settingsGetPointer()->timeoutEnterButtonSelectDive))
+				{
+					set_globalState(StD);
+					timeout_in_seconds = 0;
+				}
+			break;
+
+			case BaseMenu:
+				if((status.line == 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuDive) || RequestModeChange))
+				{
+					exitMenu();
+					timeout_in_seconds = 0;
+				}
+				if((status.line != 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuEdit) || RequestModeChange))
+				{
+					exitMenuEdit_to_Home();
+					timeout_in_seconds = 0;
+				}
+			break;
+			default:
+				break;
+			}
+		}
+		else /* surface mode */
+		{
+			switch(status.base)
+			{
+			case BaseHome:
+				// added hw 161027
+				if(!(stateRealGetPointer()->warnings.lowBattery) && (stateRealGetPointer()->lifeData.battery_charge > 9))
+				{
+					stateRealGetPointerWrite()->lastKnownBatteryPercentage = stateRealGetPointer()->lifeData.battery_charge;
+				}
+				else if((wasFirmwareUpdateCheckBattery) && (timeout_in_seconds > 3))
+				{
+					wasFirmwareUpdateCheckBattery = 0;
+					setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); // added 170306
+					if(	(settingsGetPointer()->lastKnownBatteryPercentage > 0)
+					&& 	(settingsGetPointer()->lastKnownBatteryPercentage <= 100)
+					&& 	(stateRealGetPointer()->warnings.lowBattery))
+					{
+						setBatteryPercentage(settingsGetPointer()->lastKnownBatteryPercentage);
+					}
+				}
+				// stuff before and new @161121 CCR-sensor limit 10 minutes
+				if((settingsGetPointer()->dive_mode == DIVEMODE_CCR) && (settingsGetPointer()->CCR_Mode == CCRMODE_Sensors))
+				{
+					timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemodeWithSensors;
+				}
+				else
+				{
+					timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemode;
+				}
+				if(timeout_in_seconds  >= timeout_limit_Surface_in_seconds)
+				{
+					gotoSleep();
+				}
+				break;
+			case BaseMenu:
+				if((status.line == 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuSurface) || RequestModeChange))
+				{
+					exitMenu();
+					timeout_in_seconds = 0;
+				}
+				if((status.line != 0) && ((timeout_in_seconds  >= settingsGetPointer()->timeoutMenuEdit) || RequestModeChange))
+				{
+					if((status.page != (uint8_t)((StMPLAN >> 24) & 0x0F)) || (timeout_in_seconds  >= 10*(settingsGetPointer()->timeoutMenuEdit)))
+					{
+						exitMenuEdit_to_Home();
+						timeout_in_seconds = 0;
+					}
+				}
+				break;
+
+			case BaseInfo:
+				if((timeout_in_seconds  >= settingsGetPointer()->timeoutInfo) || RequestModeChange)
+				{
+					if(status.page == InfoPageLogList)
+					{
+						exitLog();
+						timeout_in_seconds = 0;
+					}
+					else
+					if(status.page == InfoPageLogShow)
+					{
+						show_logbook_exit();
+						exitLog();
+						timeout_in_seconds = 0;
+					}
+					else
+					if(status.page != InfoPageCompass)
+					{
+						exitInfo();
+						timeout_in_seconds = 0;
+					}
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+	RequestModeChange = 0;
+}
 // debugging by https://blog.feabhas.com/2013/02/developing-a-generic-hard-fault-handler-for-arm-cortex-m3cortex-m4/
 
 /*