Mercurial > public > ostc4
diff Discovery/Src/t3.c @ 503:734f7ad46bca
Bugfix display of disabled screen.
It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION.
Changed setting of compass circle position from constant position to variable
This was needed to reuse the same function in several views with different compass position
Added new views Navigation and Depth data
Both views were basically already available but the idea behind the layout is to combine all information needed for navigation dives (compass + timer) in one view. The classic maxdepth view just showed the maxdepth with a black box on the right side. this box is now used for display of average depth (shown in classic view Stopwatch)
Minor changes in compass paint function to improve code readability
Use same Y offset for all views
While switching across the views some number were shown ~20 pixel higher than others. This was caused by the usage of the line selection which works for some fonts but not for all => set linenumber to 0 for all views
| author | Ideenmodellierer |
|---|---|
| date | Mon, 24 Aug 2020 19:53:27 +0200 |
| parents | 65c7b009136f |
| children | 5185ade91096 |
line wrap: on
line diff
--- a/Discovery/Src/t3.c Mon Aug 24 19:43:13 2020 +0200 +++ b/Discovery/Src/t3.c Mon Aug 24 19:53:27 2020 +0200 @@ -72,15 +72,25 @@ CVIEW_T3_END }; - -const uint8_t *t3_customviews = t3_customviewsStandard; +#ifdef ENABLE_BIGFONT_VX +const uint8_t t3_customviewsV2[] = +{ + CVIEW_T3_Decostop, + CVIEW_sensors, + CVIEW_T3_Navigation, + CVIEW_T3_DepthData, + CVIEW_T3_TTS, + CVIEW_T3_ppO2andGas, + CVIEW_T3_END +}; +#endif /* Private function prototypes -----------------------------------------------*/ void t3_refresh_divemode(void); uint8_t t3_test_customview_warnings(void); void t3_refresh_customview(float depth); -void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, uint16_t ActualHeading, uint16_t UserSetHeading); +void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, point_t center, uint16_t ActualHeading, uint16_t UserSetHeading); /* Exported functions --------------------------------------------------------*/ @@ -89,7 +99,7 @@ SSettings* pSettings; pSettings = settingsGetPointer(); - t3_selection_customview = t3_customviews[0]; + t3_selection_customview = t3_customviewsStandard[0]; t3screen.FBStartAdress = 0; t3screen.ImageHeight = 480; @@ -163,6 +173,8 @@ void t3_refresh(void) { + static uint8_t last_mode = MODE_SURFACE; + SStateList status; get_globalStateList(&status); @@ -175,10 +187,23 @@ if(status.base != BaseHome) return; + if(last_mode != MODE_DIVE) /* Select customview */ + { + if((settingsGetPointer()->tX_customViewTimeout == 0) && (settingsGetPointer()->showDebugInfo)) + { + t3_selection_customview = CVIEW_noneOrDebug; + } + else + { + t3_selection_customview = settingsGetPointer()->tX_customViewPrimary; + } + t3_change_customview(ACTION_END); + } t3screen.FBStartAdress = getFrame(24); t3_refresh_divemode(); GFX_SetFramesTopBottom(t3screen.FBStartAdress, 0,480); releaseAllFramesExcept(24,t3screen.FBStartAdress); + last_mode = stateUsed->mode; } @@ -474,7 +499,7 @@ t3_refresh_customview(depth_meter); if(stateUsed->warnings.lowBattery) - t3_basics_battery_low_customview_extra(&t3c1); + t3_basics_battery_low_customview_extra(&t3r1); //t3c1); } @@ -482,7 +507,7 @@ { char TextC1[256]; - TextC1[0] = '\002'; + TextC1[0] = ' ';//'\002'; TextC1[1] = '\f'; TextC1[2] = '\025'; TextC1[3] = '3'; @@ -656,6 +681,9 @@ uint8_t oxygen, helium; uint8_t lineNumber; + /* compass position */ + point_t center; + // CVIEW_T3_StopWatch SDivetime Stopwatch = {0,0,0,0}; float fAverageDepth, fAverageDepthAbsolute; @@ -672,6 +700,8 @@ tempWinX0 = tXc1->WindowX0; tempWinY0 = tXc1->WindowY0; + tempWinX1 = tXc1->WindowX1; + tempWinY1 = tXc1->WindowY1; tempWinC2X0 = tXc2->WindowX0; tempWinC2Y0 = tXc2->WindowY0; @@ -724,11 +754,6 @@ case CVIEW_T3_StopWatch: - tempWinX0 = tXc1->WindowX0; - tempWinY0 = tXc1->WindowY0; - tempWinX1 = tXc1->WindowX1; - tempWinY1 = tXc1->WindowY1; - Stopwatch.Total = timer_Stopwatch_GetTime(); Stopwatch.Minutes = Stopwatch.Total / 60; Stopwatch.Seconds = Stopwatch.Total - ( Stopwatch.Minutes * 60 ); @@ -740,8 +765,6 @@ snprintf(text,TEXTSIZE,"\030\003\016%01.1f",unit_depth_float(fAverageDepthAbsolute)); GFX_write_string(&FontT105,tXc1,text,0); - - if(!pSettings->FlipDisplay) { tXc1->WindowX0 = 480; @@ -769,19 +792,13 @@ snprintf(text,TEXTSIZE,"\030%u:\016\016%02u",Stopwatch.Minutes, Stopwatch.Seconds); GFX_write_string(&FontT105,tXc1,text,0); - tXc1->WindowX0 = tempWinX0; - tXc1->WindowY0 = tempWinY0; - tXc1->WindowX1 = tempWinX1; - tXc1->WindowY1 = tempWinY1; - break; + break; case CVIEW_T3_GasList: snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Gaslist); GFX_write_string(&FontT42,tXc1,text,0); textpointer = 0; - tempWinC2X0 = tXc2->WindowX0; - tempWinC2Tab = tXc2->WindowTab; tXc2->WindowX0 = 0; tXc2->WindowTab = 800/2; @@ -836,11 +853,13 @@ break; case CVIEW_Compass: + center.x = 600; + center.y = 116; snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Compass); GFX_write_string(&FontT42,tXc1,text,0); snprintf(text,100,"\030\003%03i`",(uint16_t)stateUsed->lifeData.compass_heading); GFX_write_string(&FontT105,tXc1,text,0); - t3_basics_compass(tXscreen, (uint16_t)stateUsed->lifeData.compass_heading, stateUsed->diveSettings.compassHeading); + t3_basics_compass(tXscreen, center, (uint16_t)stateUsed->lifeData.compass_heading, stateUsed->diveSettings.compassHeading); break; case CVIEW_T3_Decostop: @@ -873,7 +892,7 @@ , (nextstopLengthSeconds+59)/60); // old without feet hw 170703 snprintf(&text[textpointer],TEXTSIZE,"\020\003%um %u'",nextstopDepthMeter,(nextstopLengthSeconds+59)/60); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); } else if(SafetyStopTime.Total && (depth > timer_Safetystop_GetDepthUpperLimit())) { @@ -884,7 +903,7 @@ textpointer = 0; snprintf(&text[textpointer],TEXTSIZE,"\020\003\016%u:%02u",SafetyStopTime.Minutes,SafetyStopTime.Seconds); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); } else if(pDecoinfo->output_ndl_seconds) // NDL { @@ -895,7 +914,7 @@ else snprintf(text,TEXTSIZE,"\020\003%ih",pDecoinfo->output_ndl_seconds/3600); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); } break; @@ -924,7 +943,7 @@ text[textpointer++] = '\025'; textpointer += snprintf(&text[textpointer],TEXTSIZE,"%.1f",stateUsed->lifeData.ppO2Sensor_bar[i]); } - GFX_write_string(&FontT144,tXc1,text,1); + GFX_write_string(&FontT144,tXc1,text,0); } break; @@ -960,7 +979,7 @@ } else { - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); } break; @@ -974,7 +993,7 @@ else snprintf(text,TEXTSIZE,"\020\003\002%ih",(pDecoinfo->output_time_to_surface_seconds + 59)/ 3600); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); } break; @@ -983,7 +1002,7 @@ GFX_write_string(&FontT42,tXc1,text,0); snprintf(text,TEXTSIZE,"\020\003%01.2f",stateUsed->lifeData.ppO2); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT105,tXc1,text,1); + GFX_write_string(&FontT105,tXc1,text,0); textpointer = 0; text[textpointer++] = '\020'; @@ -995,11 +1014,105 @@ tHome_gas_writer(oxygen_percentage,stateUsed->lifeData.actualGas.helium_percentage,&text[textpointer]); //textpointer = snprintf(&text[textpointer],TEXTSIZE,"\020\002%02u/%02u",oxygen_percentage, stateUsed->lifeData.actualGas.helium_percentage); t3_basics_colorscheme_mod(text); - GFX_write_string(&FontT48,tXc1,text,1); + GFX_write_string(&FontT48,tXc1,text,0); break; + +#ifdef ENABLE_BIGFONT_VX + case CVIEW_T3_Navigation: + Stopwatch.Total = timer_Stopwatch_GetTime(); + Stopwatch.Minutes = Stopwatch.Total / 60; + Stopwatch.Seconds = Stopwatch.Total - ( Stopwatch.Minutes * 60 ); + fAverageDepth = timer_Stopwatch_GetAvarageDepth_Meter(); + + if(!pSettings->FlipDisplay) + { + tXc2->WindowX0 = 550; + } + else + { + tXc2->WindowX1 = 800; + tXc2->WindowY0 = t3c2.WindowY0; /* select customer window */ + } + + snprintf(text,TEXTSIZE,"\032\002\f%c", TXT_Stopwatch); + GFX_write_string(&FontT42,tXc2,text,0); + snprintf(text,TEXTSIZE,"\030\016\002%01.1f",unit_depth_float(fAverageDepth)); + GFX_write_string(&FontT105,tXc2,text,0); + if(!pSettings->FlipDisplay) + { + tXc2->WindowY0 = 100; + } + else + { + tXc2->WindowY1 -= 100; /* jump to upper of two lines */ + } + + snprintf(text,TEXTSIZE,"\030\002%u:\016\016%02u",Stopwatch.Minutes, Stopwatch.Seconds); + GFX_write_string(&FontT105,tXc2,text,0); + + + center.x = 400; + center.y = 116; + + snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Compass); + GFX_write_string(&FontT42,tXc1,text,0); + //snprintf(text,100,"\030\003%03i`",(uint16_t)stateUsed->lifeData.compass_heading); + snprintf(text,100,"\030%03i`",(uint16_t)stateUsed->lifeData.compass_heading); + GFX_write_string(&FontT144,tXc1,text,0); + t3_basics_compass(tXscreen, center, (uint16_t)stateUsed->lifeData.compass_heading, stateUsed->diveSettings.compassHeading); + + break; + + case CVIEW_T3_DepthData: + snprintf(text,TEXTSIZE,"\032\f%c",TXT_MaxDepth); + if(pSettings->FlipDisplay) + { + if(mode == DIVEMODE_Apnea) + { + GFX_write_string(&FontT42,tXc2,text,0); + } + else + { + GFX_write_string(&FontT42,tXc1,text,0); + } + } + else + { + GFX_write_string(&FontT42,tXc1,text,0); + } + snprintf(text,TEXTSIZE,"\020\003\016%01.1f",unit_depth_float(stateUsed->lifeData.max_depth_meter)); + t3_basics_colorscheme_mod(text); + if(pSettings->FlipDisplay) + { + if(mode == DIVEMODE_Apnea) + { + GFX_write_string(&FontT105,tXc2,text,0); + } + else + { + GFX_write_string(&FontT105,tXc1,text,0); + } + } + else + { + GFX_write_string(&FontT105,tXc1,text,0); + } + fAverageDepthAbsolute = stateUsed->lifeData.average_depth_meter; + snprintf(text,TEXTSIZE,"\032\002\f%c",TXT_AvgDepth); + GFX_write_string(&FontT42,tXc2,text,0); + + snprintf(text,TEXTSIZE,"\020\003\016\002\%01.1f",unit_depth_float(fAverageDepthAbsolute)); + GFX_write_string(&FontT105,tXc2,text,0); + break; +#endif } + + + tXc1->WindowX0 = tempWinX0; tXc1->WindowY0 = tempWinY0; + tXc1->WindowX1 = tempWinX1; + tXc1->WindowY1 = tempWinY1; tXc2->WindowX0 = tempWinC2X0; tXc2->WindowY0 = tempWinC2Y0; @@ -1184,14 +1297,61 @@ } } +uint8_t t3_customview_disabled(uint8_t view) +{ + uint8_t i = 0; + uint8_t cv_disabled = 0; + const uint8_t *pcv_changelist; + uint32_t cv_config = settingsGetPointer()->cv_config_BigScreen; + +#ifdef ENABLE_BIGFONT_VX + if(settingsGetPointer()->extraDisplay == EXTRADISPLAY_BIGFONT2) + { + pcv_changelist = cv_changelist_BSV2; + } + else +#endif + { + pcv_changelist = cv_changelist_BS; + } + + while(pcv_changelist[i] != CVIEW_T3_END) + { + if((view == pcv_changelist[i]) && !CHECK_BIT_THOME(cv_config, pcv_changelist[i])) + { + cv_disabled = 1; + break; + } + i++; + } + + if (((view == CVIEW_sensors) || (view == CVIEW_sensors_mV)) && + ((stateUsed->diveSettings.ppo2sensors_deactivated) || (stateUsed->diveSettings.ccrOption == 0))) + { + cv_disabled = 1; + } + + return cv_disabled; +} void t3_change_customview(uint8_t action) { - t3_basics_change_customview(&t3_selection_customview, t3_customviews, action); +#ifdef ENABLE_BIGFONT_VX + if(settingsGetPointer()->extraDisplay == EXTRADISPLAY_BIGFONT2) + { + t3_basics_change_customview(&t3_selection_customview, t3_customviewsV2, action); + } + else + { + t3_basics_change_customview(&t3_selection_customview, t3_customviewsStandard, action); + } +#else + t3_basics_change_customview(&t3_selection_customview, t3_customviewsStandard, action); +#endif } -void t3_basics_change_customview(uint8_t *tX_selection_customview, const uint8_t *tX_customviews, uint8_t action) +void t3_basics_change_customview(uint8_t *tX_selection_customview, uint8_t *tX_customviews, uint8_t action) { const SDecoinfo * pDecoinfo; if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) @@ -1199,6 +1359,7 @@ else pDecoinfo = &stateUsed->decolistVPM; + uint8_t curView; uint8_t *pViews; pViews = tX_customviews; @@ -1206,43 +1367,56 @@ uint8_t iterate = 0; /* set to 1 if a view has to be skipped */ pStartView = pViews; + curView = CVIEW_T3_END; /* set pointer to currently selected view and count number of entries */ while((*pViews != CVIEW_T3_END)) { if (*pViews == *tX_selection_customview) { pCurView = pViews; + curView = *pViews; } pViews++; } + if(curView == CVIEW_T3_END) /* called with unknown view */ + { + *tX_selection_customview = CVIEW_T3_Decostop; + pCurView = pStartView; + } pLastView = pViews; pViews = pCurView; do { iterate = 0; - if((action == ACTION_BUTTON_ENTER) || (action == ACTION_PITCH_POS)) - { - if(*pViews != CVIEW_T3_END) - pViews++; + switch(action) + { + case ACTION_BUTTON_ENTER: + case ACTION_PITCH_POS: + + if(*pViews != CVIEW_T3_END) + pViews++; - if(*pViews == CVIEW_T3_END) - { - pViews = pStartView; - } + if(*pViews == CVIEW_T3_END) + { + pViews = pStartView; + } + break; + case ACTION_PITCH_NEG: + if(pViews == pStartView) + { + pViews = pLastView - 1; + } + else + { + pViews--; + } + break; + default: + break; } - else - { - if(pViews == pStartView) - { - pViews = pLastView - 1; - } - else - { - pViews--; - } - } - if((*pViews == CVIEW_sensors) &&(stateUsed->diveSettings.ccrOption == 0)) + + if(t3_customview_disabled(*pViews)) { iterate = 1; } @@ -1250,6 +1424,10 @@ { iterate = 1; } + if((iterate) && (action == ACTION_END)) + { + action = ACTION_BUTTON_ENTER; + } }while (iterate == 1); *tX_selection_customview = *pViews; @@ -1265,17 +1443,16 @@ } -point_t t3_compass_circle(uint8_t id, uint16_t degree) +point_t t3_compass_circle(uint8_t id, uint16_t degree, point_t center) { float fCos, fSin; const float piMult = ((2 * 3.14159) / 360); // const int radius[4] = {95,105,115,60}; const int radius[4] = {85,95,105,90}; - const point_t offset = {.x = 600, .y = 116}; - + static point_t forcenter = {.x = 900, .y = 500}; /* used to identify change of circle position */ static point_t r[4][360] = { 0 }; - if(r[0][0].y == 0) + if((r[0][0].y == 0) || (forcenter.x != center.x) || (forcenter.y != center.y)) /* calculate values only once during first call or if center position changed */ { for(int i=0;i<360;i++) { @@ -1283,10 +1460,12 @@ fSin = sin(i * piMult); for(int j=0;j<4;j++) { - r[j][i].x = offset.x + (int)(fSin * radius[j]); - r[j][i].y = offset.y + (int)(fCos * radius[j]); + r[j][i].x = center.x + (int)(fSin * radius[j]); + r[j][i].y = center.y + (int)(fCos * radius[j]); } } + forcenter.x = center.x; + forcenter.y = center.y; } if(id > 3) id = 0; if(degree > 359) degree = 0; @@ -1294,10 +1473,11 @@ } -void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, uint16_t ActualHeading, uint16_t UserSetHeading) +void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, point_t center, uint16_t ActualHeading, uint16_t UserSetHeading) { + uint8_t loop = 0; uint16_t LineHeading; - point_t center; + static int32_t LastHeading = 0; int32_t newHeading = 0; int32_t diff = 0; @@ -1343,72 +1523,48 @@ while(ActualHeading > 359) ActualHeading -= 360; LineHeading = 360 - ActualHeading; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(0,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font030); // North - LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); // Maintick + + GFX_draw_thick_line(9,tXscreen, t3_compass_circle(0,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font030); // North LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); + + for (loop = 0; loop < 3; loop++) + { + if(LineHeading > 359) LineHeading -= 360; + GFX_draw_thick_line(9,tXscreen, t3_compass_circle(0,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Main Ticks + LineHeading += 90; + } LineHeading = 360 - ActualHeading; LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); // Subtick - LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 90; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); + + for (loop = 0; loop < 4; loop++) + { + if(LineHeading > 359) LineHeading -= 360; + GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Subtick + LineHeading += 90; + } LineHeading = 360 - ActualHeading; LineHeading += 22; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); // Subtick - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); // Subtick - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - LineHeading += 45; - if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading), t3_compass_circle(2,LineHeading), CLUT_Font031); - + for (loop = 0; loop < 8; loop++) + { + if(LineHeading > 359) LineHeading -= 360; + GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Subtick + LineHeading += 45; + } if(UserSetHeading) { LineHeading = UserSetHeading + 360 - ActualHeading; if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading), t3_compass_circle(2,LineHeading), CLUT_CompassUserHeadingTick); + GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_CompassUserHeadingTick); // R�ckpeilung, User Back Heading LineHeading = UserSetHeading + 360 + 180 - ActualHeading; if(LineHeading > 359) LineHeading -= 360; if(LineHeading > 359) LineHeading -= 360; - GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading), t3_compass_circle(2,LineHeading), CLUT_CompassUserBackHeadingTick); + GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_CompassUserBackHeadingTick); } - center.x = 600; - center.y = 116; GFX_draw_circle(tXscreen, center, 106, CLUT_Font030); GFX_draw_circle(tXscreen, center, 107, CLUT_Font030); GFX_draw_circle(tXscreen, center, 108, CLUT_Font030); @@ -1416,16 +1572,41 @@ uint8_t t3_GetEnabled_customviews() { - int8_t i; + uint8_t *pViews; + uint8_t increment = 1; uint8_t enabledViewCnt = 0; - uint32_t cv_config = settingsGetPointer()->cv_configuration; + +#ifdef ENABLE_BIGFONT_VX + if(settingsGetPointer()->extraDisplay == EXTRADISPLAY_BIGFONT2) + { + pViews = (uint8_t*)t3_customviewsV2; + } + else + { + pViews = (uint8_t*)t3_customviewsStandard; + } - i=0; + while((*pViews != CVIEW_T3_END)) + { + increment = 1; + /* check if view is enabled */ + if(t3_customview_disabled(*pViews)) + { + increment = 0; + } + pViews++; + enabledViewCnt += increment; + } +#else + + uint8_t i=0; + uint32_t cv_config = settingsGetPointer()->cv_config_BigScreen; + pcv_changelist = cv_changelist_BS; do { - if(cv_changelist[i] == CVIEW_sensors) /* at the moment specific big font view may not be selected. Only sensor setting is taken from t7 configuration */ + if(pcv_changelist[i] == CVIEW_sensors) /* at the moment specific big font view may not be selected. Only sensor setting is taken from t7 configuration */ { - if(!CHECK_BIT_THOME(cv_config, cv_changelist[i])) + if(!CHECK_BIT_THOME(cv_config, pcv_changelist[i])) { enabledViewCnt = NUMBER_OF_VIEWS - 1; /* sensor shall not be displayed */ } @@ -1436,12 +1617,12 @@ break; } i++; - } while(cv_changelist[i] != CVIEW_END); + } while(pcv_changelist[i] != CVIEW_T3_END); if ((stateUsed->diveSettings.ppo2sensors_deactivated) || (stateUsed->diveSettings.ccrOption == 0)) { enabledViewCnt = NUMBER_OF_VIEWS - 1; /* sensor shall not be displayed */ } - +#endif return enabledViewCnt; }