Mercurial > public > ostc4
diff Discovery/Src/tComm.c @ 872:5e027b0f7475 Evo_2_23
Added first time initialization for new bluetooth module:
The serial numbers are not defined when the electonic is connected to power for the first time. This event is used to run a initialization sequence which sets the defaults for the bluetooth modul. At the end the module may be accessed using a default name.
| author | Ideenmodellierer |
|---|---|
| date | Wed, 14 Aug 2024 14:41:04 +0200 |
| parents | bc6c90e20d9e |
| children | e373e90a48db |
line wrap: on
line diff
--- a/Discovery/Src/tComm.c Mon Aug 12 22:25:46 2024 +0200 +++ b/Discovery/Src/tComm.c Wed Aug 14 14:41:04 2024 +0200 @@ -111,7 +111,7 @@ #define UART_TIMEOUT_SECONDS (120u) /* Timeout for keeping connection open and waiting for data */ #define UART_TIMEOUT_LARGE_BLOCK (6000u) /* Timeout (ms) for reception of an 16K data block (typical RX time ~4,5seconds) */ -#define UART_CMD_BUF_SIZE (20u) /* size of buffer for command exchange */ +#define UART_CMD_BUF_SIZE (30u) /* size of buffer for command exchange */ const uint8_t id_Region1_firmware = 0xFF; const uint8_t id_RTE = 0xFE; @@ -370,6 +370,13 @@ hardware_programmPrimaryBluetoothNameSet(); #endif } + else /* no serial set at all => do default configuration of the module */ + { +#define NINAB22103B00 +#ifdef NINAB22103B00 + answer = 0xFF; +#endif + } return answer; } @@ -2141,6 +2148,10 @@ } } +void tComm_StartBlueModBaseInit() +{ + BmTmpConfig = BM_INIT_TRIGGER_ON; +} void tComm_StartBlueModConfig() { uint8_t answer = HAL_OK; @@ -2192,6 +2203,39 @@ ConfigRetryCnt = 0; RestartModule = 1; break; +#ifdef BOOTLOADER_STANDALONE + case BM_INIT_TRIGGER_ON: HAL_Delay(2000); + HAL_GPIO_WritePin(BLE_UBLOX_DSR_GPIO_PORT,BLE_UBLOX_DSR_PIN,GPIO_PIN_RESET); + BmTmpConfig++; + break; + case BM_INIT_TRIGGER_OFF: HAL_Delay(1); + HAL_GPIO_WritePin(BLE_UBLOX_DSR_GPIO_PORT,BLE_UBLOX_DSR_PIN,GPIO_PIN_SET); + HAL_Delay(2000); + BmTmpConfig++; + break; + case BM_INIT_FACTORY: sprintf(TxBuffer,"AT+UFACTORY\r"); /*Set to factory defined configuration */ + break; + case BM_INIT_MODE: sprintf(TxBuffer,"AT+UMSM=1\r"); /* start in Data mode */ + break; + case BM_INIT_BLE: sprintf(TxBuffer,"AT+UBTLE=2\r"); /* Bluetooth low energy Peripheral */ + break; + case BM_INIT_NAME: sprintf(TxBuffer,"AT+UBTLN=OSTC4-12345\r"); /* Bluetooth name */ + break; + case BM_INIT_SSP_IDO_OFF: sprintf(TxBuffer,"AT+UDSC=0,0\r"); /* Disable SPP Server on ID0 */ + break; + case BM_INIT_SSP_IDO_ON: sprintf(TxBuffer,"AT+UDSC=0,3\r"); /* SPP Server on ID0 */ + break; + case BM_INIT_SSP_ID1_OFF: sprintf(TxBuffer,"AT+UDSC=1,0\r"); /* Disable SPS Server on ID1 */ + break; + case BM_INIT_SSP_ID1_ON: sprintf(TxBuffer,"AT+UDSC=1,6\r"); /* SPS Server on ID1 */ + break; + case BM_INIT_STORE: sprintf(TxBuffer,"AT&W\r"); /* write settings into eeprom */ + break; + case BM_INIT_RESTART: sprintf(TxBuffer,"AT+CPWROFF\r"); /* reboot module */ + break; + case BM_INIT_DONE: BmTmpConfig = BM_CONFIG_ECHO; + break; +#endif default: break; }