--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Documentations/dump-disc.cfg	Wed Mar 07 17:35:35 2018 +0100
@@ -0,0 +1,28 @@
+#! openocd -f
+# Define the prob used:
+source [find interface/stlink-v2.cfg]
+set WORKAREASIZE 0x8000
+transport select hla_swd
+
+# Reset options
+set ENABLE_LOW_POWER 1
+set STOP_WATCHDOG 1
+reset_config srst_only srst_nogate connect_assert_srst
+
+# Seelct the right chip
+set CHIPNAME stm32f427IIT6
+set CONNECT_UNDER_RESET 1
+source [find target/stm32f4x.cfg]
+
+# Allow to continue execution after a connection:
+init_reset run
+
+puts "Flash banks:"
+flash banks
+
+#puts "Reading FIRMWARE..."
+# Requires OpenOCD 0.10.0 / released January 2017 ?
+#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000
+
+#puts "Done."
+exit