Mercurial > public > ostc4

comparison Common/Drivers/STM32F4xx/Source/Templates/system_stm32f4xx.c @ 160:e3ca52b8e7fa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Merge with FlipDisplay
author heinrichsweikamp
date Thu, 07 Mar 2019 15:06:43 +0100
parents c78bcbd5deda
children
comparison
equal deleted inserted replaced
80:cc2bb7bb8456 160:e3ca52b8e7fa
1 /**
2 ******************************************************************************
3 * @file system_stm32f4xx.c
4 * @author MCD Application Team
5 * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
6 *
7 * This file provides two functions and one global variable to be called from
8 * user application:
9 * - SystemInit(): This function is called at startup just after reset and
10 * before branch to main program. This call is made inside
11 * the "startup_stm32f4xx.s" file.
12 *
13 * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
14 * by the user application to setup the SysTick
15 * timer or configure other parameters.
16 *
17 * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
18 * be called whenever the core clock is changed
19 * during program execution.
20 *
21 *
22 ******************************************************************************
23 * @attention
24 *
25 * <h2><center>&copy; COPYRIGHT 2017 STMicroelectronics</center></h2>
26 *
27 * Redistribution and use in source and binary forms, with or without modification,
28 * are permitted provided that the following conditions are met:
29 * 1. Redistributions of source code must retain the above copyright notice,
30 * this list of conditions and the following disclaimer.
31 * 2. Redistributions in binary form must reproduce the above copyright notice,
32 * this list of conditions and the following disclaimer in the documentation
33 * and/or other materials provided with the distribution.
34 * 3. Neither the name of STMicroelectronics nor the names of its contributors
35 * may be used to endorse or promote products derived from this software
36 * without specific prior written permission.
37 *
38 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
39 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
40 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
41 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
42 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
43 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
44 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
45 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
46 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
47 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
48 *
49 ******************************************************************************
50 */
51
52 /** @addtogroup CMSIS
53 * @{
54 */
55
56 /** @addtogroup stm32f4xx_system
57 * @{
58 */
59
60 /** @addtogroup STM32F4xx_System_Private_Includes
61 * @{
62 */
63
64
65 #include "stm32f4xx.h"
66
67 #if !defined (HSE_VALUE)
68 #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
69 #endif /* HSE_VALUE */
70
71 #if !defined (HSI_VALUE)
72 #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
73 #endif /* HSI_VALUE */
74
75 /**
76 * @}
77 */
78
79 /** @addtogroup STM32F4xx_System_Private_TypesDefinitions
80 * @{
81 */
82
83 /**
84 * @}
85 */
86
87 /** @addtogroup STM32F4xx_System_Private_Defines
88 * @{
89 */
90
91 /************************* Miscellaneous Configuration ************************/
92 /*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
93 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
94 || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
95 || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
96 /* #define DATA_IN_ExtSRAM */
97 #endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
98 STM32F412Zx || STM32F412Vx */
99
100 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
101 || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
102 /* #define DATA_IN_ExtSDRAM */
103 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
104 STM32F479xx */
105
106 /*!< Uncomment the following line if you need to relocate your vector Table in
107 Internal SRAM. */
108 /* #define VECT_TAB_SRAM */
109 #define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
110 This value must be a multiple of 0x200. */
111 /******************************************************************************/
112
113 /**
114 * @}
115 */
116
117 /** @addtogroup STM32F4xx_System_Private_Macros
118 * @{
119 */
120
121 /**
122 * @}
123 */
124
125 /** @addtogroup STM32F4xx_System_Private_Variables
126 * @{
127 */
128 /* This variable is updated in three ways:
129 1) by calling CMSIS function SystemCoreClockUpdate()
130 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
131 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
132 Note: If you use this function to configure the system clock; then there
133 is no need to call the 2 first functions listed above, since SystemCoreClock
134 variable is updated automatically.
135 */
136 uint32_t SystemCoreClock = 16000000;
137 const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
138 const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
139 /**
140 * @}
141 */
142
143 /** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
144 * @{
145 */
146
147 #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
148 static void SystemInit_ExtMemCtl(void);
149 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
150
151 /**
152 * @}
153 */
154
155 /** @addtogroup STM32F4xx_System_Private_Functions
156 * @{
157 */
158
159 /**
160 * @brief Setup the microcontroller system
161 * Initialize the FPU setting, vector table location and External memory
162 * configuration.
163 * @param None
164 * @retval None
165 */
166 void SystemInit(void)
167 {
168 /* FPU settings ------------------------------------------------------------*/
169 #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
170 SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
171 #endif
172 /* Reset the RCC clock configuration to the default reset state ------------*/
173 /* Set HSION bit */
174 RCC->CR |= (uint32_t)0x00000001;
175
176 /* Reset CFGR register */
177 RCC->CFGR = 0x00000000;
178
179 /* Reset HSEON, CSSON and PLLON bits */
180 RCC->CR &= (uint32_t)0xFEF6FFFF;
181
182 /* Reset PLLCFGR register */
183 RCC->PLLCFGR = 0x24003010;
184
185 /* Reset HSEBYP bit */
186 RCC->CR &= (uint32_t)0xFFFBFFFF;
187
188 /* Disable all interrupts */
189 RCC->CIR = 0x00000000;
190
191 #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
192 SystemInit_ExtMemCtl();
193 #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
194
195 /* Configure the Vector Table location add offset address ------------------*/
196 #ifdef VECT_TAB_SRAM
197 SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
198 #else
199 SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
200 #endif
201 }
202
203 /**
204 * @brief Update SystemCoreClock variable according to Clock Register Values.
205 * The SystemCoreClock variable contains the core clock (HCLK), it can
206 * be used by the user application to setup the SysTick timer or configure
207 * other parameters.
208 *
209 * @note Each time the core clock (HCLK) changes, this function must be called
210 * to update SystemCoreClock variable value. Otherwise, any configuration
211 * based on this variable will be incorrect.
212 *
213 * @note - The system frequency computed by this function is not the real
214 * frequency in the chip. It is calculated based on the predefined
215 * constant and the selected clock source:
216 *
217 * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
218 *
219 * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
220 *
221 * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
222 * or HSI_VALUE(*) multiplied/divided by the PLL factors.
223 *
224 * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
225 * 16 MHz) but the real value may vary depending on the variations
226 * in voltage and temperature.
227 *
228 * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
229 * depends on the application requirements), user has to ensure that HSE_VALUE
230 * is same as the real frequency of the crystal used. Otherwise, this function
231 * may have wrong result.
232 *
233 * - The result of this function could be not correct when using fractional
234 * value for HSE crystal.
235 *
236 * @param None
237 * @retval None
238 */
239 void SystemCoreClockUpdate(void)
240 {
241 uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
242
243 /* Get SYSCLK source -------------------------------------------------------*/
244 tmp = RCC->CFGR & RCC_CFGR_SWS;
245
246 switch (tmp)
247 {
248 case 0x00: /* HSI used as system clock source */
249 SystemCoreClock = HSI_VALUE;
250 break;
251 case 0x04: /* HSE used as system clock source */
252 SystemCoreClock = HSE_VALUE;
253 break;
254 case 0x08: /* PLL used as system clock source */
255
256 /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
257 SYSCLK = PLL_VCO / PLL_P
258 */
259 pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
260 pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
261
262 if (pllsource != 0)
263 {
264 /* HSE used as PLL clock source */
265 pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
266 }
267 else
268 {
269 /* HSI used as PLL clock source */
270 pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
271 }
272
273 pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
274 SystemCoreClock = pllvco/pllp;
275 break;
276 default:
277 SystemCoreClock = HSI_VALUE;
278 break;
279 }
280 /* Compute HCLK frequency --------------------------------------------------*/
281 /* Get HCLK prescaler */
282 tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
283 /* HCLK frequency */
284 SystemCoreClock >>= tmp;
285 }
286
287 #if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
288 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
289 || defined(STM32F469xx) || defined(STM32F479xx)
290 /**
291 * @brief Setup the external memory controller.
292 * Called in startup_stm32f4xx.s before jump to main.
293 * This function configures the external memories (SRAM/SDRAM)
294 * This SRAM/SDRAM will be used as program data memory (including heap and stack).
295 * @param None
296 * @retval None
297 */
298 void SystemInit_ExtMemCtl(void)
299 {
300 __IO uint32_t tmp = 0x00;
301
302 register uint32_t tmpreg = 0, timeout = 0xFFFF;
303 register __IO uint32_t index;
304
305 /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
306 RCC->AHB1ENR |= 0x000001F8;
307
308 /* Delay after an RCC peripheral clock enabling */
309 tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
310
311 /* Connect PDx pins to FMC Alternate function */
312 GPIOD->AFR[0] = 0x00CCC0CC;
313 GPIOD->AFR[1] = 0xCCCCCCCC;
314 /* Configure PDx pins in Alternate function mode */
315 GPIOD->MODER = 0xAAAA0A8A;
316 /* Configure PDx pins speed to 100 MHz */
317 GPIOD->OSPEEDR = 0xFFFF0FCF;
318 /* Configure PDx pins Output type to push-pull */
319 GPIOD->OTYPER = 0x00000000;
320 /* No pull-up, pull-down for PDx pins */
321 GPIOD->PUPDR = 0x00000000;
322
323 /* Connect PEx pins to FMC Alternate function */
324 GPIOE->AFR[0] = 0xC00CC0CC;
325 GPIOE->AFR[1] = 0xCCCCCCCC;
326 /* Configure PEx pins in Alternate function mode */
327 GPIOE->MODER = 0xAAAA828A;
328 /* Configure PEx pins speed to 100 MHz */
329 GPIOE->OSPEEDR = 0xFFFFC3CF;
330 /* Configure PEx pins Output type to push-pull */
331 GPIOE->OTYPER = 0x00000000;
332 /* No pull-up, pull-down for PEx pins */
333 GPIOE->PUPDR = 0x00000000;
334
335 /* Connect PFx pins to FMC Alternate function */
336 GPIOF->AFR[0] = 0xCCCCCCCC;
337 GPIOF->AFR[1] = 0xCCCCCCCC;
338 /* Configure PFx pins in Alternate function mode */
339 GPIOF->MODER = 0xAA800AAA;
340 /* Configure PFx pins speed to 50 MHz */
341 GPIOF->OSPEEDR = 0xAA800AAA;
342 /* Configure PFx pins Output type to push-pull */
343 GPIOF->OTYPER = 0x00000000;
344 /* No pull-up, pull-down for PFx pins */
345 GPIOF->PUPDR = 0x00000000;
346
347 /* Connect PGx pins to FMC Alternate function */
348 GPIOG->AFR[0] = 0xCCCCCCCC;
349 GPIOG->AFR[1] = 0xCCCCCCCC;
350 /* Configure PGx pins in Alternate function mode */
351 GPIOG->MODER = 0xAAAAAAAA;
352 /* Configure PGx pins speed to 50 MHz */
353 GPIOG->OSPEEDR = 0xAAAAAAAA;
354 /* Configure PGx pins Output type to push-pull */
355 GPIOG->OTYPER = 0x00000000;
356 /* No pull-up, pull-down for PGx pins */
357 GPIOG->PUPDR = 0x00000000;
358
359 /* Connect PHx pins to FMC Alternate function */
360 GPIOH->AFR[0] = 0x00C0CC00;
361 GPIOH->AFR[1] = 0xCCCCCCCC;
362 /* Configure PHx pins in Alternate function mode */
363 GPIOH->MODER = 0xAAAA08A0;
364 /* Configure PHx pins speed to 50 MHz */
365 GPIOH->OSPEEDR = 0xAAAA08A0;
366 /* Configure PHx pins Output type to push-pull */
367 GPIOH->OTYPER = 0x00000000;
368 /* No pull-up, pull-down for PHx pins */
369 GPIOH->PUPDR = 0x00000000;
370
371 /* Connect PIx pins to FMC Alternate function */
372 GPIOI->AFR[0] = 0xCCCCCCCC;
373 GPIOI->AFR[1] = 0x00000CC0;
374 /* Configure PIx pins in Alternate function mode */
375 GPIOI->MODER = 0x0028AAAA;
376 /* Configure PIx pins speed to 50 MHz */
377 GPIOI->OSPEEDR = 0x0028AAAA;
378 /* Configure PIx pins Output type to push-pull */
379 GPIOI->OTYPER = 0x00000000;
380 /* No pull-up, pull-down for PIx pins */
381 GPIOI->PUPDR = 0x00000000;
382
383 /*-- FMC Configuration -------------------------------------------------------*/
384 /* Enable the FMC interface clock */
385 RCC->AHB3ENR |= 0x00000001;
386 /* Delay after an RCC peripheral clock enabling */
387 tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
388
389 FMC_Bank5_6->SDCR[0] = 0x000019E4;
390 FMC_Bank5_6->SDTR[0] = 0x01115351;
391
392 /* SDRAM initialization sequence */
393 /* Clock enable command */
394 FMC_Bank5_6->SDCMR = 0x00000011;
395 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
396 while((tmpreg != 0) && (timeout-- > 0))
397 {
398 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
399 }
400
401 /* Delay */
402 for (index = 0; index<1000; index++);
403
404 /* PALL command */
405 FMC_Bank5_6->SDCMR = 0x00000012;
406 timeout = 0xFFFF;
407 while((tmpreg != 0) && (timeout-- > 0))
408 {
409 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
410 }
411
412 /* Auto refresh command */
413 FMC_Bank5_6->SDCMR = 0x00000073;
414 timeout = 0xFFFF;
415 while((tmpreg != 0) && (timeout-- > 0))
416 {
417 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
418 }
419
420 /* MRD register program */
421 FMC_Bank5_6->SDCMR = 0x00046014;
422 timeout = 0xFFFF;
423 while((tmpreg != 0) && (timeout-- > 0))
424 {
425 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
426 }
427
428 /* Set refresh count */
429 tmpreg = FMC_Bank5_6->SDRTR;
430 FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
431
432 /* Disable write protection */
433 tmpreg = FMC_Bank5_6->SDCR[0];
434 FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
435
436 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
437 /* Configure and enable Bank1_SRAM2 */
438 FMC_Bank1->BTCR[2] = 0x00001011;
439 FMC_Bank1->BTCR[3] = 0x00000201;
440 FMC_Bank1E->BWTR[2] = 0x0fffffff;
441 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
442 #if defined(STM32F469xx) || defined(STM32F479xx)
443 /* Configure and enable Bank1_SRAM2 */
444 FMC_Bank1->BTCR[2] = 0x00001091;
445 FMC_Bank1->BTCR[3] = 0x00110212;
446 FMC_Bank1E->BWTR[2] = 0x0fffffff;
447 #endif /* STM32F469xx || STM32F479xx */
448
449 (void)(tmp);
450 }
451 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
452 #elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
453 /**
454 * @brief Setup the external memory controller.
455 * Called in startup_stm32f4xx.s before jump to main.
456 * This function configures the external memories (SRAM/SDRAM)
457 * This SRAM/SDRAM will be used as program data memory (including heap and stack).
458 * @param None
459 * @retval None
460 */
461 void SystemInit_ExtMemCtl(void)
462 {
463 __IO uint32_t tmp = 0x00;
464 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
465 || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
466 #if defined (DATA_IN_ExtSDRAM)
467 register uint32_t tmpreg = 0, timeout = 0xFFFF;
468 register __IO uint32_t index;
469
470 #if defined(STM32F446xx)
471 /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
472 clock */
473 RCC->AHB1ENR |= 0x0000007D;
474 #else
475 /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
476 clock */
477 RCC->AHB1ENR |= 0x000001F8;
478 #endif /* STM32F446xx */
479 /* Delay after an RCC peripheral clock enabling */
480 tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
481
482 #if defined(STM32F446xx)
483 /* Connect PAx pins to FMC Alternate function */
484 GPIOA->AFR[0] |= 0xC0000000;
485 GPIOA->AFR[1] |= 0x00000000;
486 /* Configure PDx pins in Alternate function mode */
487 GPIOA->MODER |= 0x00008000;
488 /* Configure PDx pins speed to 50 MHz */
489 GPIOA->OSPEEDR |= 0x00008000;
490 /* Configure PDx pins Output type to push-pull */
491 GPIOA->OTYPER |= 0x00000000;
492 /* No pull-up, pull-down for PDx pins */
493 GPIOA->PUPDR |= 0x00000000;
494
495 /* Connect PCx pins to FMC Alternate function */
496 GPIOC->AFR[0] |= 0x00CC0000;
497 GPIOC->AFR[1] |= 0x00000000;
498 /* Configure PDx pins in Alternate function mode */
499 GPIOC->MODER |= 0x00000A00;
500 /* Configure PDx pins speed to 50 MHz */
501 GPIOC->OSPEEDR |= 0x00000A00;
502 /* Configure PDx pins Output type to push-pull */
503 GPIOC->OTYPER |= 0x00000000;
504 /* No pull-up, pull-down for PDx pins */
505 GPIOC->PUPDR |= 0x00000000;
506 #endif /* STM32F446xx */
507
508 /* Connect PDx pins to FMC Alternate function */
509 GPIOD->AFR[0] = 0x000000CC;
510 GPIOD->AFR[1] = 0xCC000CCC;
511 /* Configure PDx pins in Alternate function mode */
512 GPIOD->MODER = 0xA02A000A;
513 /* Configure PDx pins speed to 50 MHz */
514 GPIOD->OSPEEDR = 0xA02A000A;
515 /* Configure PDx pins Output type to push-pull */
516 GPIOD->OTYPER = 0x00000000;
517 /* No pull-up, pull-down for PDx pins */
518 GPIOD->PUPDR = 0x00000000;
519
520 /* Connect PEx pins to FMC Alternate function */
521 GPIOE->AFR[0] = 0xC00000CC;
522 GPIOE->AFR[1] = 0xCCCCCCCC;
523 /* Configure PEx pins in Alternate function mode */
524 GPIOE->MODER = 0xAAAA800A;
525 /* Configure PEx pins speed to 50 MHz */
526 GPIOE->OSPEEDR = 0xAAAA800A;
527 /* Configure PEx pins Output type to push-pull */
528 GPIOE->OTYPER = 0x00000000;
529 /* No pull-up, pull-down for PEx pins */
530 GPIOE->PUPDR = 0x00000000;
531
532 /* Connect PFx pins to FMC Alternate function */
533 GPIOF->AFR[0] = 0xCCCCCCCC;
534 GPIOF->AFR[1] = 0xCCCCCCCC;
535 /* Configure PFx pins in Alternate function mode */
536 GPIOF->MODER = 0xAA800AAA;
537 /* Configure PFx pins speed to 50 MHz */
538 GPIOF->OSPEEDR = 0xAA800AAA;
539 /* Configure PFx pins Output type to push-pull */
540 GPIOF->OTYPER = 0x00000000;
541 /* No pull-up, pull-down for PFx pins */
542 GPIOF->PUPDR = 0x00000000;
543
544 /* Connect PGx pins to FMC Alternate function */
545 GPIOG->AFR[0] = 0xCCCCCCCC;
546 GPIOG->AFR[1] = 0xCCCCCCCC;
547 /* Configure PGx pins in Alternate function mode */
548 GPIOG->MODER = 0xAAAAAAAA;
549 /* Configure PGx pins speed to 50 MHz */
550 GPIOG->OSPEEDR = 0xAAAAAAAA;
551 /* Configure PGx pins Output type to push-pull */
552 GPIOG->OTYPER = 0x00000000;
553 /* No pull-up, pull-down for PGx pins */
554 GPIOG->PUPDR = 0x00000000;
555
556 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
557 || defined(STM32F469xx) || defined(STM32F479xx)
558 /* Connect PHx pins to FMC Alternate function */
559 GPIOH->AFR[0] = 0x00C0CC00;
560 GPIOH->AFR[1] = 0xCCCCCCCC;
561 /* Configure PHx pins in Alternate function mode */
562 GPIOH->MODER = 0xAAAA08A0;
563 /* Configure PHx pins speed to 50 MHz */
564 GPIOH->OSPEEDR = 0xAAAA08A0;
565 /* Configure PHx pins Output type to push-pull */
566 GPIOH->OTYPER = 0x00000000;
567 /* No pull-up, pull-down for PHx pins */
568 GPIOH->PUPDR = 0x00000000;
569
570 /* Connect PIx pins to FMC Alternate function */
571 GPIOI->AFR[0] = 0xCCCCCCCC;
572 GPIOI->AFR[1] = 0x00000CC0;
573 /* Configure PIx pins in Alternate function mode */
574 GPIOI->MODER = 0x0028AAAA;
575 /* Configure PIx pins speed to 50 MHz */
576 GPIOI->OSPEEDR = 0x0028AAAA;
577 /* Configure PIx pins Output type to push-pull */
578 GPIOI->OTYPER = 0x00000000;
579 /* No pull-up, pull-down for PIx pins */
580 GPIOI->PUPDR = 0x00000000;
581 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
582
583 /*-- FMC Configuration -------------------------------------------------------*/
584 /* Enable the FMC interface clock */
585 RCC->AHB3ENR |= 0x00000001;
586 /* Delay after an RCC peripheral clock enabling */
587 tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
588
589 /* Configure and enable SDRAM bank1 */
590 #if defined(STM32F446xx)
591 FMC_Bank5_6->SDCR[0] = 0x00001954;
592 #else
593 FMC_Bank5_6->SDCR[0] = 0x000019E4;
594 #endif /* STM32F446xx */
595 FMC_Bank5_6->SDTR[0] = 0x01115351;
596
597 /* SDRAM initialization sequence */
598 /* Clock enable command */
599 FMC_Bank5_6->SDCMR = 0x00000011;
600 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
601 while((tmpreg != 0) && (timeout-- > 0))
602 {
603 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
604 }
605
606 /* Delay */
607 for (index = 0; index<1000; index++);
608
609 /* PALL command */
610 FMC_Bank5_6->SDCMR = 0x00000012;
611 timeout = 0xFFFF;
612 while((tmpreg != 0) && (timeout-- > 0))
613 {
614 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
615 }
616
617 /* Auto refresh command */
618 #if defined(STM32F446xx)
619 FMC_Bank5_6->SDCMR = 0x000000F3;
620 #else
621 FMC_Bank5_6->SDCMR = 0x00000073;
622 #endif /* STM32F446xx */
623 timeout = 0xFFFF;
624 while((tmpreg != 0) && (timeout-- > 0))
625 {
626 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
627 }
628
629 /* MRD register program */
630 #if defined(STM32F446xx)
631 FMC_Bank5_6->SDCMR = 0x00044014;
632 #else
633 FMC_Bank5_6->SDCMR = 0x00046014;
634 #endif /* STM32F446xx */
635 timeout = 0xFFFF;
636 while((tmpreg != 0) && (timeout-- > 0))
637 {
638 tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
639 }
640
641 /* Set refresh count */
642 tmpreg = FMC_Bank5_6->SDRTR;
643 #if defined(STM32F446xx)
644 FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
645 #else
646 FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
647 #endif /* STM32F446xx */
648
649 /* Disable write protection */
650 tmpreg = FMC_Bank5_6->SDCR[0];
651 FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
652 #endif /* DATA_IN_ExtSDRAM */
653 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
654
655 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
656 || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
657 || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
658
659 #if defined(DATA_IN_ExtSRAM)
660 /*-- GPIOs Configuration -----------------------------------------------------*/
661 /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
662 RCC->AHB1ENR |= 0x00000078;
663 /* Delay after an RCC peripheral clock enabling */
664 tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
665
666 /* Connect PDx pins to FMC Alternate function */
667 GPIOD->AFR[0] = 0x00CCC0CC;
668 GPIOD->AFR[1] = 0xCCCCCCCC;
669 /* Configure PDx pins in Alternate function mode */
670 GPIOD->MODER = 0xAAAA0A8A;
671 /* Configure PDx pins speed to 100 MHz */
672 GPIOD->OSPEEDR = 0xFFFF0FCF;
673 /* Configure PDx pins Output type to push-pull */
674 GPIOD->OTYPER = 0x00000000;
675 /* No pull-up, pull-down for PDx pins */
676 GPIOD->PUPDR = 0x00000000;
677
678 /* Connect PEx pins to FMC Alternate function */
679 GPIOE->AFR[0] = 0xC00CC0CC;
680 GPIOE->AFR[1] = 0xCCCCCCCC;
681 /* Configure PEx pins in Alternate function mode */
682 GPIOE->MODER = 0xAAAA828A;
683 /* Configure PEx pins speed to 100 MHz */
684 GPIOE->OSPEEDR = 0xFFFFC3CF;
685 /* Configure PEx pins Output type to push-pull */
686 GPIOE->OTYPER = 0x00000000;
687 /* No pull-up, pull-down for PEx pins */
688 GPIOE->PUPDR = 0x00000000;
689
690 /* Connect PFx pins to FMC Alternate function */
691 GPIOF->AFR[0] = 0x00CCCCCC;
692 GPIOF->AFR[1] = 0xCCCC0000;
693 /* Configure PFx pins in Alternate function mode */
694 GPIOF->MODER = 0xAA000AAA;
695 /* Configure PFx pins speed to 100 MHz */
696 GPIOF->OSPEEDR = 0xFF000FFF;
697 /* Configure PFx pins Output type to push-pull */
698 GPIOF->OTYPER = 0x00000000;
699 /* No pull-up, pull-down for PFx pins */
700 GPIOF->PUPDR = 0x00000000;
701
702 /* Connect PGx pins to FMC Alternate function */
703 GPIOG->AFR[0] = 0x00CCCCCC;
704 GPIOG->AFR[1] = 0x000000C0;
705 /* Configure PGx pins in Alternate function mode */
706 GPIOG->MODER = 0x00085AAA;
707 /* Configure PGx pins speed to 100 MHz */
708 GPIOG->OSPEEDR = 0x000CAFFF;
709 /* Configure PGx pins Output type to push-pull */
710 GPIOG->OTYPER = 0x00000000;
711 /* No pull-up, pull-down for PGx pins */
712 GPIOG->PUPDR = 0x00000000;
713
714 /*-- FMC/FSMC Configuration --------------------------------------------------*/
715 /* Enable the FMC/FSMC interface clock */
716 RCC->AHB3ENR |= 0x00000001;
717
718 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
719 /* Delay after an RCC peripheral clock enabling */
720 tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
721 /* Configure and enable Bank1_SRAM2 */
722 FMC_Bank1->BTCR[2] = 0x00001011;
723 FMC_Bank1->BTCR[3] = 0x00000201;
724 FMC_Bank1E->BWTR[2] = 0x0fffffff;
725 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
726 #if defined(STM32F469xx) || defined(STM32F479xx)
727 /* Delay after an RCC peripheral clock enabling */
728 tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
729 /* Configure and enable Bank1_SRAM2 */
730 FMC_Bank1->BTCR[2] = 0x00001091;
731 FMC_Bank1->BTCR[3] = 0x00110212;
732 FMC_Bank1E->BWTR[2] = 0x0fffffff;
733 #endif /* STM32F469xx || STM32F479xx */
734 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
735 || defined(STM32F412Zx) || defined(STM32F412Vx)
736 /* Delay after an RCC peripheral clock enabling */
737 tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
738 /* Configure and enable Bank1_SRAM2 */
739 FSMC_Bank1->BTCR[2] = 0x00001011;
740 FSMC_Bank1->BTCR[3] = 0x00000201;
741 FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
742 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
743
744 #endif /* DATA_IN_ExtSRAM */
745 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
746 STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
747 (void)(tmp);
748 }
749 #endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
750 /**
751 * @}
752 */
753
754 /**
755 * @}
756 */
757
758 /**
759 * @}
760 */
761 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/