Mercurial > public > ostc4
comparison Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h @ 128:c78bcbd5deda FlipDisplay
Added current STM32 standandard libraries in version independend folder structure
author | Ideenmodellierer |
---|---|
date | Sun, 17 Feb 2019 21:12:22 +0100 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
127:1369f8660eaa | 128:c78bcbd5deda |
---|---|
1 /** | |
2 ****************************************************************************** | |
3 * @file stm32f4xx_hal_pcd.h | |
4 * @author MCD Application Team | |
5 * @brief Header file of PCD HAL module. | |
6 ****************************************************************************** | |
7 * @attention | |
8 * | |
9 * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
10 * | |
11 * Redistribution and use in source and binary forms, with or without modification, | |
12 * are permitted provided that the following conditions are met: | |
13 * 1. Redistributions of source code must retain the above copyright notice, | |
14 * this list of conditions and the following disclaimer. | |
15 * 2. Redistributions in binary form must reproduce the above copyright notice, | |
16 * this list of conditions and the following disclaimer in the documentation | |
17 * and/or other materials provided with the distribution. | |
18 * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
19 * may be used to endorse or promote products derived from this software | |
20 * without specific prior written permission. | |
21 * | |
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
25 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
29 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
32 * | |
33 ****************************************************************************** | |
34 */ | |
35 | |
36 /* Define to prevent recursive inclusion -------------------------------------*/ | |
37 #ifndef __STM32F4xx_HAL_PCD_H | |
38 #define __STM32F4xx_HAL_PCD_H | |
39 | |
40 #ifdef __cplusplus | |
41 extern "C" { | |
42 #endif | |
43 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ | |
44 defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ | |
45 defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ | |
46 defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ | |
47 defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
48 /* Includes ------------------------------------------------------------------*/ | |
49 #include "stm32f4xx_ll_usb.h" | |
50 | |
51 /** @addtogroup STM32F4xx_HAL_Driver | |
52 * @{ | |
53 */ | |
54 | |
55 /** @addtogroup PCD | |
56 * @{ | |
57 */ | |
58 | |
59 /* Exported types ------------------------------------------------------------*/ | |
60 /** @defgroup PCD_Exported_Types PCD Exported Types | |
61 * @{ | |
62 */ | |
63 | |
64 /** | |
65 * @brief PCD State structure definition | |
66 */ | |
67 typedef enum | |
68 { | |
69 HAL_PCD_STATE_RESET = 0x00U, | |
70 HAL_PCD_STATE_READY = 0x01U, | |
71 HAL_PCD_STATE_ERROR = 0x02U, | |
72 HAL_PCD_STATE_BUSY = 0x03U, | |
73 HAL_PCD_STATE_TIMEOUT = 0x04U | |
74 } PCD_StateTypeDef; | |
75 | |
76 #ifdef USB_OTG_GLPMCFG_LPMEN | |
77 /* Device LPM suspend state */ | |
78 typedef enum | |
79 { | |
80 LPM_L0 = 0x00U, /* on */ | |
81 LPM_L1 = 0x01U, /* LPM L1 sleep */ | |
82 LPM_L2 = 0x02U, /* suspend */ | |
83 LPM_L3 = 0x03U /* off */ | |
84 }PCD_LPM_StateTypeDef; | |
85 #endif /* USB_OTG_GLPMCFG_LPMEN */ | |
86 | |
87 typedef USB_OTG_GlobalTypeDef PCD_TypeDef; | |
88 typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; | |
89 typedef USB_OTG_EPTypeDef PCD_EPTypeDef ; | |
90 | |
91 /** | |
92 * @brief PCD Handle Structure definition | |
93 */ | |
94 typedef struct | |
95 { | |
96 PCD_TypeDef *Instance; /*!< Register base address */ | |
97 PCD_InitTypeDef Init; /*!< PCD required parameters */ | |
98 PCD_EPTypeDef IN_ep[16U]; /*!< IN endpoint parameters */ | |
99 PCD_EPTypeDef OUT_ep[16U]; /*!< OUT endpoint parameters */ | |
100 HAL_LockTypeDef Lock; /*!< PCD peripheral status */ | |
101 __IO PCD_StateTypeDef State; /*!< PCD communication state */ | |
102 uint32_t Setup[12U]; /*!< Setup packet buffer */ | |
103 #ifdef USB_OTG_GLPMCFG_LPMEN | |
104 PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ | |
105 uint32_t BESL; | |
106 uint32_t lpm_active; /*!< Enable or disable the Link Power Management . | |
107 This parameter can be set to ENABLE or DISABLE */ | |
108 #endif /* USB_OTG_GLPMCFG_LPMEN */ | |
109 #ifdef USB_OTG_GCCFG_BCDEN | |
110 uint32_t battery_charging_active; /*!< Enable or disable Battery charging. | |
111 This parameter can be set to ENABLE or DISABLE */ | |
112 #endif /* USB_OTG_GCCFG_BCDEN */ | |
113 void *pData; /*!< Pointer to upper stack Handler */ | |
114 } PCD_HandleTypeDef; | |
115 | |
116 /** | |
117 * @} | |
118 */ | |
119 | |
120 /* Include PCD HAL Extension module */ | |
121 #include "stm32f4xx_hal_pcd_ex.h" | |
122 | |
123 /* Exported constants --------------------------------------------------------*/ | |
124 /** @defgroup PCD_Exported_Constants PCD Exported Constants | |
125 * @{ | |
126 */ | |
127 | |
128 /** @defgroup PCD_Speed PCD Speed | |
129 * @{ | |
130 */ | |
131 #define PCD_SPEED_HIGH 0U | |
132 #define PCD_SPEED_HIGH_IN_FULL 1U | |
133 #define PCD_SPEED_FULL 2U | |
134 /** | |
135 * @} | |
136 */ | |
137 | |
138 /** @defgroup PCD_PHY_Module PCD PHY Module | |
139 * @{ | |
140 */ | |
141 #define PCD_PHY_ULPI 1U | |
142 #define PCD_PHY_EMBEDDED 2U | |
143 /** | |
144 * @} | |
145 */ | |
146 | |
147 /** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value | |
148 * @{ | |
149 */ | |
150 #ifndef USBD_HS_TRDT_VALUE | |
151 #define USBD_HS_TRDT_VALUE 9U | |
152 #endif /* USBD_HS_TRDT_VALUE */ | |
153 #ifndef USBD_FS_TRDT_VALUE | |
154 #define USBD_FS_TRDT_VALUE 5U | |
155 #endif /* USBD_FS_TRDT_VALUE */ | |
156 /** | |
157 * @} | |
158 */ | |
159 | |
160 /** | |
161 * @} | |
162 */ | |
163 | |
164 /* Exported macros -----------------------------------------------------------*/ | |
165 /** @defgroup PCD_Exported_Macros PCD Exported Macros | |
166 * @brief macros to handle interrupts and specific clock configurations | |
167 * @{ | |
168 */ | |
169 #define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) | |
170 #define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) | |
171 | |
172 #define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) | |
173 #define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) | |
174 #define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) | |
175 | |
176 #define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \ | |
177 ~(USB_OTG_PCGCCTL_STOPCLK) | |
178 | |
179 #define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK | |
180 | |
181 #define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10U) | |
182 | |
183 #define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE 0x08U | |
184 #define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE 0x0CU | |
185 #define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U | |
186 | |
187 #define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE 0x08U | |
188 #define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE 0x0CU | |
189 #define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE 0x10U | |
190 | |
191 #define USB_OTG_HS_WAKEUP_EXTI_LINE 0x00100000U /*!< External interrupt line 20 Connected to the USB HS EXTI Line */ | |
192 #define USB_OTG_FS_WAKEUP_EXTI_LINE 0x00040000U /*!< External interrupt line 18 Connected to the USB FS EXTI Line */ | |
193 | |
194 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) | |
195 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) | |
196 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) | |
197 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) | |
198 | |
199 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ | |
200 EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\ | |
201 }while(0U) | |
202 | |
203 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\ | |
204 EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ | |
205 }while(0U) | |
206 | |
207 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ | |
208 EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ | |
209 EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\ | |
210 EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\ | |
211 }while(0U) | |
212 | |
213 #define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) | |
214 | |
215 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE | |
216 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) | |
217 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) | |
218 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE | |
219 | |
220 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ | |
221 EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\ | |
222 }while(0U) | |
223 | |
224 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\ | |
225 EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ | |
226 }while(0U) | |
227 | |
228 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ | |
229 EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ | |
230 EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\ | |
231 EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\ | |
232 }while(0U) | |
233 | |
234 #define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) | |
235 /** | |
236 * @} | |
237 */ | |
238 | |
239 /* Exported functions --------------------------------------------------------*/ | |
240 /** @addtogroup PCD_Exported_Functions PCD Exported Functions | |
241 * @{ | |
242 */ | |
243 | |
244 /* Initialization/de-initialization functions ********************************/ | |
245 /** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions | |
246 * @{ | |
247 */ | |
248 HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); | |
249 HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); | |
250 void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); | |
251 void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); | |
252 /** | |
253 * @} | |
254 */ | |
255 | |
256 /* I/O operation functions ***************************************************/ | |
257 /* Non-Blocking mode: Interrupt */ | |
258 /** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions | |
259 * @{ | |
260 */ | |
261 /* Non-Blocking mode: Interrupt */ | |
262 HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); | |
263 HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); | |
264 void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); | |
265 | |
266 void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); | |
267 void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); | |
268 void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); | |
269 void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); | |
270 void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); | |
271 void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); | |
272 void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); | |
273 void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); | |
274 void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); | |
275 void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); | |
276 void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); | |
277 /** | |
278 * @} | |
279 */ | |
280 | |
281 /* Peripheral Control functions **********************************************/ | |
282 /** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions | |
283 * @{ | |
284 */ | |
285 HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); | |
286 HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); | |
287 HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); | |
288 HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); | |
289 HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); | |
290 HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); | |
291 HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); | |
292 uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); | |
293 HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); | |
294 HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); | |
295 HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); | |
296 HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); | |
297 HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); | |
298 /** | |
299 * @} | |
300 */ | |
301 | |
302 /* Peripheral State functions ************************************************/ | |
303 /** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions | |
304 * @{ | |
305 */ | |
306 PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); | |
307 /** | |
308 * @} | |
309 */ | |
310 | |
311 /** | |
312 * @} | |
313 */ | |
314 | |
315 /* Private macros ------------------------------------------------------------*/ | |
316 /** @defgroup PCD_Private_Macros PCD Private Macros | |
317 * @{ | |
318 */ | |
319 | |
320 /** | |
321 * @} | |
322 */ | |
323 | |
324 /** | |
325 * @} | |
326 */ | |
327 | |
328 /** | |
329 * @} | |
330 */ | |
331 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || | |
332 STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || | |
333 STM32F412Vx || STM32F412Cx || STM32F413xx || STM32F423xx */ | |
334 #ifdef __cplusplus | |
335 } | |
336 #endif | |
337 | |
338 | |
339 #endif /* __STM32F4xx_HAL_PCD_H */ | |
340 | |
341 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |