Mercurial > public > ostc4
comparison Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h @ 128:c78bcbd5deda FlipDisplay
Added current STM32 standandard libraries in version independend folder structure
author | Ideenmodellierer |
---|---|
date | Sun, 17 Feb 2019 21:12:22 +0100 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
127:1369f8660eaa | 128:c78bcbd5deda |
---|---|
1 /** | |
2 ****************************************************************************** | |
3 * @file stm32f4xx_hal_mmc.h | |
4 * @author MCD Application Team | |
5 * @brief Header file of MMC HAL module. | |
6 ****************************************************************************** | |
7 * @attention | |
8 * | |
9 * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
10 * | |
11 * Redistribution and use in source and binary forms, with or without modification, | |
12 * are permitted provided that the following conditions are met: | |
13 * 1. Redistributions of source code must retain the above copyright notice, | |
14 * this list of conditions and the following disclaimer. | |
15 * 2. Redistributions in binary form must reproduce the above copyright notice, | |
16 * this list of conditions and the following disclaimer in the documentation | |
17 * and/or other materials provided with the distribution. | |
18 * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
19 * may be used to endorse or promote products derived from this software | |
20 * without specific prior written permission. | |
21 * | |
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
25 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
29 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
32 * | |
33 ****************************************************************************** | |
34 */ | |
35 | |
36 /* Define to prevent recursive inclusion -------------------------------------*/ | |
37 #ifndef __STM32F4xx_HAL_MMC_H | |
38 #define __STM32F4xx_HAL_MMC_H | |
39 | |
40 #ifdef __cplusplus | |
41 extern "C" { | |
42 #endif | |
43 | |
44 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ | |
45 defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ | |
46 defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ | |
47 defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ | |
48 defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
49 | |
50 /* Includes ------------------------------------------------------------------*/ | |
51 #include "stm32f4xx_ll_sdmmc.h" | |
52 | |
53 /** @addtogroup STM32F4xx_HAL_Driver | |
54 * @{ | |
55 */ | |
56 | |
57 /** @defgroup MMC MMC | |
58 * @brief MMC HAL module driver | |
59 * @{ | |
60 */ | |
61 | |
62 /* Exported types ------------------------------------------------------------*/ | |
63 /** @defgroup MMC_Exported_Types MMC Exported Types | |
64 * @{ | |
65 */ | |
66 | |
67 /** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure | |
68 * @{ | |
69 */ | |
70 typedef enum | |
71 { | |
72 HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */ | |
73 HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */ | |
74 HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */ | |
75 HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */ | |
76 HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */ | |
77 HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */ | |
78 HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfert State */ | |
79 HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */ | |
80 }HAL_MMC_StateTypeDef; | |
81 /** | |
82 * @} | |
83 */ | |
84 | |
85 /** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure | |
86 * @{ | |
87 */ | |
88 typedef enum | |
89 { | |
90 HAL_MMC_CARD_READY = 0x00000001U, /*!< Card state is ready */ | |
91 HAL_MMC_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */ | |
92 HAL_MMC_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */ | |
93 HAL_MMC_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */ | |
94 HAL_MMC_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */ | |
95 HAL_MMC_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */ | |
96 HAL_MMC_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */ | |
97 HAL_MMC_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */ | |
98 HAL_MMC_CARD_ERROR = 0x000000FFU /*!< Card response Error */ | |
99 }HAL_MMC_CardStateTypeDef; | |
100 /** | |
101 * @} | |
102 */ | |
103 | |
104 /** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition | |
105 * @{ | |
106 */ | |
107 #define MMC_InitTypeDef SDIO_InitTypeDef | |
108 #define MMC_TypeDef SDIO_TypeDef | |
109 | |
110 /** | |
111 * @brief MMC Card Information Structure definition | |
112 */ | |
113 typedef struct | |
114 { | |
115 uint32_t CardType; /*!< Specifies the card Type */ | |
116 | |
117 uint32_t Class; /*!< Specifies the class of the card class */ | |
118 | |
119 uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ | |
120 | |
121 uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ | |
122 | |
123 uint32_t BlockSize; /*!< Specifies one block size in bytes */ | |
124 | |
125 uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ | |
126 | |
127 uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ | |
128 | |
129 }HAL_MMC_CardInfoTypeDef; | |
130 | |
131 /** | |
132 * @brief MMC handle Structure definition | |
133 */ | |
134 typedef struct | |
135 { | |
136 MMC_TypeDef *Instance; /*!< MMC registers base address */ | |
137 | |
138 MMC_InitTypeDef Init; /*!< MMC required parameters */ | |
139 | |
140 HAL_LockTypeDef Lock; /*!< MMC locking object */ | |
141 | |
142 uint32_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ | |
143 | |
144 uint32_t TxXferSize; /*!< MMC Tx Transfer size */ | |
145 | |
146 uint32_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ | |
147 | |
148 uint32_t RxXferSize; /*!< MMC Rx Transfer size */ | |
149 | |
150 __IO uint32_t Context; /*!< MMC transfer context */ | |
151 | |
152 __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ | |
153 | |
154 __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ | |
155 | |
156 DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ | |
157 | |
158 DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ | |
159 | |
160 HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ | |
161 | |
162 uint32_t CSD[4U]; /*!< MMC card specific data table */ | |
163 | |
164 uint32_t CID[4U]; /*!< MMC card identification number table */ | |
165 | |
166 }MMC_HandleTypeDef; | |
167 | |
168 /** | |
169 * @} | |
170 */ | |
171 | |
172 /** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register | |
173 * @{ | |
174 */ | |
175 typedef struct | |
176 { | |
177 __IO uint8_t CSDStruct; /*!< CSD structure */ | |
178 __IO uint8_t SysSpecVersion; /*!< System specification version */ | |
179 __IO uint8_t Reserved1; /*!< Reserved */ | |
180 __IO uint8_t TAAC; /*!< Data read access time 1 */ | |
181 __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ | |
182 __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ | |
183 __IO uint16_t CardComdClasses; /*!< Card command classes */ | |
184 __IO uint8_t RdBlockLen; /*!< Max. read data block length */ | |
185 __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ | |
186 __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ | |
187 __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ | |
188 __IO uint8_t DSRImpl; /*!< DSR implemented */ | |
189 __IO uint8_t Reserved2; /*!< Reserved */ | |
190 __IO uint32_t DeviceSize; /*!< Device Size */ | |
191 __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ | |
192 __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ | |
193 __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ | |
194 __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ | |
195 __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ | |
196 __IO uint8_t EraseGrSize; /*!< Erase group size */ | |
197 __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ | |
198 __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ | |
199 __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ | |
200 __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ | |
201 __IO uint8_t WrSpeedFact; /*!< Write speed factor */ | |
202 __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ | |
203 __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ | |
204 __IO uint8_t Reserved3; /*!< Reserved */ | |
205 __IO uint8_t ContentProtectAppli; /*!< Content protection application */ | |
206 __IO uint8_t FileFormatGrouop; /*!< File format group */ | |
207 __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ | |
208 __IO uint8_t PermWrProtect; /*!< Permanent write protection */ | |
209 __IO uint8_t TempWrProtect; /*!< Temporary write protection */ | |
210 __IO uint8_t FileFormat; /*!< File format */ | |
211 __IO uint8_t ECC; /*!< ECC code */ | |
212 __IO uint8_t CSD_CRC; /*!< CSD CRC */ | |
213 __IO uint8_t Reserved4; /*!< Always 1 */ | |
214 | |
215 }HAL_MMC_CardCSDTypeDef; | |
216 /** | |
217 * @} | |
218 */ | |
219 | |
220 /** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register | |
221 * @{ | |
222 */ | |
223 typedef struct | |
224 { | |
225 __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ | |
226 __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ | |
227 __IO uint32_t ProdName1; /*!< Product Name part1 */ | |
228 __IO uint8_t ProdName2; /*!< Product Name part2 */ | |
229 __IO uint8_t ProdRev; /*!< Product Revision */ | |
230 __IO uint32_t ProdSN; /*!< Product Serial Number */ | |
231 __IO uint8_t Reserved1; /*!< Reserved1 */ | |
232 __IO uint16_t ManufactDate; /*!< Manufacturing Date */ | |
233 __IO uint8_t CID_CRC; /*!< CID CRC */ | |
234 __IO uint8_t Reserved2; /*!< Always 1 */ | |
235 | |
236 }HAL_MMC_CardCIDTypeDef; | |
237 /** | |
238 * @} | |
239 */ | |
240 | |
241 /** @defgroup MMC_Exported_Types_Group6 MMC Card Status returned by ACMD13 | |
242 * @{ | |
243 */ | |
244 typedef struct | |
245 { | |
246 __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ | |
247 __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ | |
248 __IO uint16_t CardType; /*!< Carries information about card type */ | |
249 __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ | |
250 __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ | |
251 __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ | |
252 __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ | |
253 __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ | |
254 __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ | |
255 __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ | |
256 | |
257 }HAL_MMC_CardStatusTypeDef; | |
258 /** | |
259 * @} | |
260 */ | |
261 | |
262 /** | |
263 * @} | |
264 */ | |
265 | |
266 /* Exported constants --------------------------------------------------------*/ | |
267 /** @defgroup MMC_Exported_Constants Exported Constants | |
268 * @{ | |
269 */ | |
270 | |
271 #define BLOCKSIZE 512U /*!< Block size is 512 bytes */ | |
272 | |
273 #define CAPACITY 0x400000U /*!< Log Block Nuumber for 2 G bytes Cards */ | |
274 | |
275 /** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition | |
276 * @{ | |
277 */ | |
278 #define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ | |
279 #define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ | |
280 #define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ | |
281 #define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ | |
282 #define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ | |
283 #define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ | |
284 #define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ | |
285 #define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ | |
286 #define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the | |
287 number of transferred bytes does not match the block length */ | |
288 #define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ | |
289 #define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ | |
290 #define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ | |
291 #define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock | |
292 command or if there was an attempt to access a locked card */ | |
293 #define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ | |
294 #define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ | |
295 #define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ | |
296 #define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ | |
297 #define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ | |
298 #define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ | |
299 #define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ | |
300 #define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ | |
301 #define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ | |
302 #define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ | |
303 #define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out | |
304 of erase sequence command was received */ | |
305 #define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ | |
306 #define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ | |
307 #define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ | |
308 #define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ | |
309 #define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ | |
310 #define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ | |
311 #define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ | |
312 #define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ | |
313 #define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ | |
314 | |
315 /** | |
316 * @} | |
317 */ | |
318 | |
319 /** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration structure | |
320 * @{ | |
321 */ | |
322 #define MMC_CONTEXT_NONE 0x00000000U /*!< None */ | |
323 #define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ | |
324 #define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ | |
325 #define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ | |
326 #define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ | |
327 #define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ | |
328 #define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ | |
329 | |
330 /** | |
331 * @} | |
332 */ | |
333 | |
334 /** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode | |
335 * @{ | |
336 */ | |
337 /** | |
338 * @brief | |
339 */ | |
340 #define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */ | |
341 #define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */ | |
342 #define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */ | |
343 #define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */ | |
344 #define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U | |
345 /** | |
346 * @} | |
347 */ | |
348 | |
349 /** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards | |
350 * @{ | |
351 */ | |
352 #define MMC_HIGH_VOLTAGE_CARD 0x00000000U | |
353 #define MMC_DUAL_VOLTAGE_CARD 0x00000001U | |
354 /** | |
355 * @} | |
356 */ | |
357 | |
358 /** | |
359 * @} | |
360 */ | |
361 | |
362 /* Exported macro ------------------------------------------------------------*/ | |
363 /** @defgroup MMC_Exported_macros MMC Exported Macros | |
364 * @brief macros to handle interrupts and specific clock configurations | |
365 * @{ | |
366 */ | |
367 | |
368 /** | |
369 * @brief Enable the MMC device. | |
370 * @retval None | |
371 */ | |
372 #define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) | |
373 | |
374 /** | |
375 * @brief Disable the MMC device. | |
376 * @retval None | |
377 */ | |
378 #define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) | |
379 | |
380 /** | |
381 * @brief Enable the SDMMC DMA transfer. | |
382 * @retval None | |
383 */ | |
384 #define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) | |
385 | |
386 /** | |
387 * @brief Disable the SDMMC DMA transfer. | |
388 * @retval None | |
389 */ | |
390 #define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) | |
391 | |
392 /** | |
393 * @brief Enable the MMC device interrupt. | |
394 * @param __HANDLE__ MMC Handle | |
395 * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. | |
396 * This parameter can be one or a combination of the following values: | |
397 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
398 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
399 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
400 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
401 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
402 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
403 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
404 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
405 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
406 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
407 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
408 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
409 * @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
410 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
411 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
412 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
413 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
414 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
415 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
416 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
417 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
418 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
419 * @retval None | |
420 */ | |
421 #define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
422 | |
423 /** | |
424 * @brief Disable the MMC device interrupt. | |
425 * @param __HANDLE__ MMC Handle | |
426 * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. | |
427 * This parameter can be one or a combination of the following values: | |
428 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
429 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
430 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
431 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
432 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
433 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
434 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
435 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
436 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
437 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
438 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
439 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
440 * @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
441 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
442 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
443 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
444 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
445 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
446 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
447 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
448 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
449 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
450 * @retval None | |
451 */ | |
452 #define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
453 | |
454 /** | |
455 * @brief Check whether the specified MMC flag is set or not. | |
456 * @param __HANDLE__ MMC Handle | |
457 * @param __FLAG__ specifies the flag to check. | |
458 * This parameter can be one of the following values: | |
459 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) | |
460 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) | |
461 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout | |
462 * @arg SDIO_FLAG_DTIMEOUT: Data timeout | |
463 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error | |
464 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error | |
465 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) | |
466 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) | |
467 * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) | |
468 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) | |
469 * @arg SDIO_FLAG_CMDACT: Command transfer in progress | |
470 * @arg SDIO_FLAG_TXACT: Data transmit in progress | |
471 * @arg SDIO_FLAG_RXACT: Data receive in progress | |
472 * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty | |
473 * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full | |
474 * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full | |
475 * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full | |
476 * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty | |
477 * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty | |
478 * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO | |
479 * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO | |
480 * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received | |
481 * @retval The new state of MMC FLAG (SET or RESET). | |
482 */ | |
483 #define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) | |
484 | |
485 /** | |
486 * @brief Clear the MMC's pending flags. | |
487 * @param __HANDLE__ MMC Handle | |
488 * @param __FLAG__ specifies the flag to clear. | |
489 * This parameter can be one or a combination of the following values: | |
490 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) | |
491 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) | |
492 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout | |
493 * @arg SDIO_FLAG_DTIMEOUT: Data timeout | |
494 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error | |
495 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error | |
496 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) | |
497 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) | |
498 * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) | |
499 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) | |
500 * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received | |
501 * @retval None | |
502 */ | |
503 #define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) | |
504 | |
505 /** | |
506 * @brief Check whether the specified MMC interrupt has occurred or not. | |
507 * @param __HANDLE__ MMC Handle | |
508 * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. | |
509 * This parameter can be one of the following values: | |
510 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
511 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
512 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
513 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
514 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
515 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
516 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
517 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
518 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt | |
519 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt | |
520 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt | |
521 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt | |
522 * @arg SDIO_IT_RXACT: Data receive in progress interrupt | |
523 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt | |
524 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt | |
525 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt | |
526 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt | |
527 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt | |
528 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt | |
529 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt | |
530 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt | |
531 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
532 * @retval The new state of MMC IT (SET or RESET). | |
533 */ | |
534 #define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
535 | |
536 /** | |
537 * @brief Clear the MMC's interrupt pending bits. | |
538 * @param __HANDLE__ MMC Handle | |
539 * @param __INTERRUPT__ specifies the interrupt pending bit to clear. | |
540 * This parameter can be one or a combination of the following values: | |
541 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt | |
542 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt | |
543 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt | |
544 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt | |
545 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt | |
546 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt | |
547 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt | |
548 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt | |
549 * @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt | |
550 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt | |
551 * @retval None | |
552 */ | |
553 #define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) | |
554 | |
555 /** | |
556 * @} | |
557 */ | |
558 | |
559 /* Exported functions --------------------------------------------------------*/ | |
560 /** @defgroup MMC_Exported_Functions MMC Exported Functions | |
561 * @{ | |
562 */ | |
563 | |
564 /** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions | |
565 * @{ | |
566 */ | |
567 HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); | |
568 HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); | |
569 HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); | |
570 void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); | |
571 void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); | |
572 /** | |
573 * @} | |
574 */ | |
575 | |
576 /** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions | |
577 * @{ | |
578 */ | |
579 /* Blocking mode: Polling */ | |
580 HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); | |
581 HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); | |
582 HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); | |
583 /* Non-Blocking mode: IT */ | |
584 HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
585 HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
586 /* Non-Blocking mode: DMA */ | |
587 HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
588 HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); | |
589 | |
590 void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); | |
591 | |
592 /* Callback in non blocking modes (DMA) */ | |
593 void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); | |
594 void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); | |
595 void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); | |
596 void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); | |
597 /** | |
598 * @} | |
599 */ | |
600 | |
601 /** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions | |
602 * @{ | |
603 */ | |
604 HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); | |
605 /** | |
606 * @} | |
607 */ | |
608 | |
609 /** @defgroup MMC_Exported_Functions_Group4 MMC card related functions | |
610 * @{ | |
611 */ | |
612 HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); | |
613 HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); | |
614 HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); | |
615 HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); | |
616 /** | |
617 * @} | |
618 */ | |
619 | |
620 /** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions | |
621 * @{ | |
622 */ | |
623 HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); | |
624 uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); | |
625 /** | |
626 * @} | |
627 */ | |
628 | |
629 /** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management | |
630 * @{ | |
631 */ | |
632 HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); | |
633 HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); | |
634 /** | |
635 * @} | |
636 */ | |
637 | |
638 /* Private types -------------------------------------------------------------*/ | |
639 /** @defgroup MMC_Private_Types MMC Private Types | |
640 * @{ | |
641 */ | |
642 | |
643 /** | |
644 * @} | |
645 */ | |
646 | |
647 /* Private defines -----------------------------------------------------------*/ | |
648 /** @defgroup MMC_Private_Defines MMC Private Defines | |
649 * @{ | |
650 */ | |
651 | |
652 /** | |
653 * @} | |
654 */ | |
655 | |
656 /* Private variables ---------------------------------------------------------*/ | |
657 /** @defgroup MMC_Private_Variables MMC Private Variables | |
658 * @{ | |
659 */ | |
660 | |
661 /** | |
662 * @} | |
663 */ | |
664 | |
665 /* Private constants ---------------------------------------------------------*/ | |
666 /** @defgroup MMC_Private_Constants MMC Private Constants | |
667 * @{ | |
668 */ | |
669 | |
670 /** | |
671 * @} | |
672 */ | |
673 | |
674 /* Private macros ------------------------------------------------------------*/ | |
675 /** @defgroup MMC_Private_Macros MMC Private Macros | |
676 * @{ | |
677 */ | |
678 | |
679 /** | |
680 * @} | |
681 */ | |
682 | |
683 /* Private functions prototypes ----------------------------------------------*/ | |
684 /** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes | |
685 * @{ | |
686 */ | |
687 | |
688 /** | |
689 * @} | |
690 */ | |
691 | |
692 /* Private functions ---------------------------------------------------------*/ | |
693 /** @defgroup MMC_Private_Functions MMC Private Functions | |
694 * @{ | |
695 */ | |
696 | |
697 /** | |
698 * @} | |
699 */ | |
700 | |
701 /** | |
702 * @} | |
703 */ | |
704 | |
705 /** | |
706 * @} | |
707 */ | |
708 | |
709 /** | |
710 * @} | |
711 */ | |
712 | |
713 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || | |
714 STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || | |
715 STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ | |
716 | |
717 #ifdef __cplusplus | |
718 } | |
719 #endif | |
720 | |
721 | |
722 #endif /* __STM32F4xx_HAL_MMC_H */ | |
723 | |
724 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |