Mercurial > public > ostc4
comparison wiki/Home.md @ 38:5f11787b4f42
include in ostc4 repository
| author | heinrichsweikamp |
|---|---|
| date | Sat, 28 Apr 2018 11:52:34 +0200 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 37:ccc45c0e1ea2 | 38:5f11787b4f42 |
|---|---|
| 1 # Open Source Code for the OSTC4 Dive Computer # | |
| 2 | |
| 3 | |
| 4 ## Documentation ## | |
| 5 | |
| 6 [Modules](Modules.md) page details the code organisation. | |
| 7 [Hardware Ressources](Hardware Ressources.md) page details the hardware parts, | |
| 8 the low-level, and the middle-ware drivers used to manage them. | |
| 9 | |
| 10 ## How to Compile ? ## | |
| 11 | |
| 12 Most of the code is written in _C-99_. A small glue is in assembly. Everything is compatible with | |
| 13 the _GCC_ toolchain for ARM processors. | |
| 14 | |
| 15 * [Using OpenSTM32](Using OpenSTM32.md), the free integrated IDE from the OpenSTM32 community, based on GCC cross compiler within an _Eclipse_ environment. Project management and configuration. Compile & Link. Hardware debugger through a JTAG/SWD probe. | |
| 16 | |
| 17 ## Other Tools ## | |
| 18 | |
| 19 * [STM32F429I-DISC1](http://www.st.com/en/evaluation-tools/32f429idiscovery.html) | |
| 20 It is a chip (~ 20€) evaluation board, that contains a _STM32F429ZIT6_ CPU, 2MB flash ROM, 256KB RAM, a 320x240 LCD touch screen a few LEDs and a pair of buttons. Very cheap (~ 25 euro). | |
| 21 It should allows to run _OSTC4 Discovery code_, but just for basic testing as it lacks all specific sensors, LCD screen 800x640 resolution and the 3 interface buttons. | |
| 22 _An interesting project would be to add a special compilation option to get some reasonable support on this chip debugging platform, emulating the screen and buttons..._ | |
| 23 | |
| 24 * [STM32 ST-LINK Utility](http://www.st.com/en/development-tools/stsw-link004.html) (**Windows only**) allow to do many things to the _discovery kit_ through its JTAG/SWD interface: upload & verify application code, dump memory. Provides both a _Graphical_ and a _Command Line_ interface. | |
| 25 | |
| 26 * [STMStudio](http://www.st.com/en/development-tools/stm-studio-stm32.html) (**WINDOWS ONLY**) allows real-time inspection of an application running on the _discovery kit_. | |
| 27 It is connected through the JTAG/SWD interface. | |
| 28 It allows to read and write variables defined in the application's binary (ELF file). To display or to trace graphs (eg. to display gas loading during dive simulation ?) | |
| 29 | |
| 30 * [OpenOCD](http://openocd.org/) is another command utility to speak JTAG/SWD. Seems hard to use directly (very low level commands). But _OpenSTM32 IDE_ do use it for programming and debugging, and you can copy configuration files from a working project. Note version 0.10 (or above) seems mandatory to dump firmware contents. | |
| 31 | |
| 32 * _**OSTC4 with 2 SWD connectors**_, the ultimate debugging tool: a specially made OSTC4, with a pair of extra SWD connectors you can connect to any JTAG/SWD probe. Cannot dive (absolutely not water tight), but allows to debug code on the real hardware (ie. set break points, single step the code and read/write variables), using a standard JTAG/SWD debuggers (eg. a low cost [ST-Link/V2](http://www.st.com/stlinkv2) for ~ 25 euro). | |
| 33 _Note that H&W will freely provide SWD OSTC4 platform to programmer serious about involving in code development._ | |
| 34 | |
| 35 ## Other Resources ## | |
| 36 | |
| 37 * The **Ultimate Reference** for everyone serious about the OSTC4 firmware details | |
| 38 and _HAL_ programming (1800 pages): [UM1725 HAL Users Manual](www.st.com/resource/en/user_manual/dm00105879.pdf) | |
| 39 * Reserving memory from the linker script: https://mcuoneclipse.com/2012/11/01/defining-variables-at-absolute-addresses-with-gcc/ | |
| 40 * Placing a variable at an absolute address: https://sourceware.org/binutils/docs-2.24/ld/Source-Code-Reference.html#Source-Code-Reference |