Mercurial > public > ostc4

comparison Small_CPU/Inc/stm32f4xx_hal_conf.h @ 38:5f11787b4f42

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
include in ostc4 repository
author heinrichsweikamp
date Sat, 28 Apr 2018 11:52:34 +0200
parents
children f35e53ef04e0
comparison
equal deleted inserted replaced
37:ccc45c0e1ea2 38:5f11787b4f42
1 /**
2 ******************************************************************************
3 * @file GPIO/GPIO_IOToggle/Inc/stm32f4xx_hal_conf.h
4 * @author MCD Application Team
5 * @version V1.1.0
6 * @date 26-June-2014
7 * @brief HAL configuration file.
8 ******************************************************************************
9 * @attention
10 *
11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
12 *
13 * Redistribution and use in source and binary forms, with or without modification,
14 * are permitted provided that the following conditions are met:
15 * 1. Redistributions of source code must retain the above copyright notice,
16 * this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright notice,
18 * this list of conditions and the following disclaimer in the documentation
19 * and/or other materials provided with the distribution.
20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 *
35 ******************************************************************************
36 */
37
38 /* Define to prevent recursive inclusion -------------------------------------*/
39 #ifndef STM32F4xx_HAL_CONF_H
40 #define STM32F4xx_HAL_CONF_H
41
42 #ifdef __cplusplus
43 extern "C" {
44 #endif
45
46 /* Exported types ------------------------------------------------------------*/
47 /* Exported constants --------------------------------------------------------*/
48
49 /* ######################### Hardware Selection ############################## */
50 #define STM32F411xE
51
52 /* ########################## Module Selection ############################## */
53 /**
54 * @brief This is the list of modules to be used in the HAL driver
55 */
56 #define HAL_MODULE_ENABLED
57 #define HAL_ADC_MODULE_ENABLED
58 /* #define HAL_CAN_MODULE_ENABLED */
59 /* #define HAL_CRC_MODULE_ENABLED */
60 /* #define HAL_CRYP_MODULE_ENABLED */
61 /* #define HAL_DAC_MODULE_ENABLED */
62 /* #define HAL_DCMI_MODULE_ENABLED */
63 #define HAL_DMA_MODULE_ENABLED
64 /* #define HAL_DMA2D_MODULE_ENABLED */
65 /* #define HAL_ETH_MODULE_ENABLED */
66 #define HAL_FLASH_MODULE_ENABLED
67 /* #define HAL_NAND_MODULE_ENABLED */
68 /* #define HAL_NOR_MODULE_ENABLED */
69 /* #define HAL_PCCARD_MODULE_ENABLED */
70 /* #define HAL_SRAM_MODULE_ENABLED */
71 /* #define HAL_SDRAM_MODULE_ENABLED */
72 /* #define HAL_HASH_MODULE_ENABLED */
73 #define HAL_GPIO_MODULE_ENABLED
74 #define HAL_I2C_MODULE_ENABLED
75 /* #define HAL_I2S_MODULE_ENABLED */
76 /* #define HAL_IWDG_MODULE_ENABLED */
77 /* #define HAL_LTDC_MODULE_ENABLED */
78 #define HAL_PWR_MODULE_ENABLED
79 #define HAL_RCC_MODULE_ENABLED
80 /* #define HAL_RNG_MODULE_ENABLED */
81 #define HAL_RTC_MODULE_ENABLED
82 /* #define HAL_SAI_MODULE_ENABLED */
83 /* #define HAL_SD_MODULE_ENABLED */
84 #define HAL_SPI_MODULE_ENABLED
85 /* #define HAL_TIM_MODULE_ENABLED */
86 #define HAL_UART_MODULE_ENABLED
87 /* #define HAL_USART_MODULE_ENABLED */
88 /* #define HAL_IRDA_MODULE_ENABLED */
89 /* #define HAL_SMARTCARD_MODULE_ENABLED*/
90 /* #define HAL_WWDG_MODULE_ENABLED */
91 #define HAL_CORTEX_MODULE_ENABLED
92 /* #define HAL_PCD_MODULE_ENABLED */
93 /* #define HAL_HCD_MODULE_ENABLED */
94
95
96 /* ########################## HSE/HSI Values adaptation ##################### */
97 /**
98 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
99 * This value is used by the RCC HAL module to compute the system frequency
100 * (when HSE is used as system clock source, directly or through the PLL).
101 */
102 #if !defined (HSE_VALUE)
103 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
104 #endif /* HSE_VALUE */
105
106 #if !defined (HSE_STARTUP_TIMEOUT)
107 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
108 #endif /* HSE_STARTUP_TIMEOUT */
109
110 /**
111 * @brief Internal High Speed oscillator (HSI) value.
112 * This value is used by the RCC HAL module to compute the system frequency
113 * (when HSI is used as system clock source, directly or through the PLL).
114 */
115 #if !defined (HSI_VALUE)
116 #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
117 #endif /* HSI_VALUE */
118
119 /**
120 * @brief Internal Low Speed oscillator (LSI) value.
121 */
122 #if !defined (LSI_VALUE)
123 #define LSI_VALUE ((uint32_t)40000)
124 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
125 The real value may vary depending on the variations
126 in voltage and temperature. */
127 /**
128 * @brief External Low Speed oscillator (LSE) value.
129 */
130 #if !defined (LSE_VALUE)
131 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
132 #endif /* LSE_VALUE */
133
134 /**
135 * @brief External clock source for I2S peripheral
136 * This value is used by the I2S HAL module to compute the I2S clock source
137 * frequency, this source is inserted directly through I2S_CKIN pad.
138 */
139 #if !defined (EXTERNAL_CLOCK_VALUE)
140 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
141 #endif /* EXTERNAL_CLOCK_VALUE */
142
143 /* Tip: To avoid modifying this file each time you need to use different HSE,
144 === you can define the HSE value in your toolchain compiler preprocessor. */
145
146 /* ########################### System Configuration ######################### */
147 /**
148 * @brief This is the HAL system configuration section
149 */
150 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
151 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */
152 #define USE_RTOS 0
153 #define PREFETCH_ENABLE 1
154 #define INSTRUCTION_CACHE_ENABLE 1
155 #define DATA_CACHE_ENABLE 1
156
157 /* ########################## Assert Selection ############################## */
158 /**
159 * @brief Uncomment the line below to expanse the "assert_param" macro in the
160 * HAL drivers code
161 */
162 /* #define USE_FULL_ASSERT 1 */
163
164 /* ################## Ethernet peripheral configuration ##################### */
165
166 /* Section 1 : Ethernet peripheral configuration */
167
168 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
169 #define MAC_ADDR0 2
170 #define MAC_ADDR1 0
171 #define MAC_ADDR2 0
172 #define MAC_ADDR3 0
173 #define MAC_ADDR4 0
174 #define MAC_ADDR5 0
175
176 /* Definition of the Ethernet driver buffers size and count */
177 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
178 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
179 #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
180 #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
181
182 /* Section 2: PHY configuration section */
183
184 /* DP83848 PHY Address*/
185 #define DP83848_PHY_ADDRESS 0x01
186 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
187 #define PHY_RESET_DELAY ((uint32_t)0x000000FF)
188 /* PHY Configuration delay */
189 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
190
191 #define PHY_READ_TO ((uint32_t)0x0000FFFF)
192 #define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
193
194 /* Section 3: Common PHY Registers */
195
196 #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
197 #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
198
199 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
200 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
201 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
202 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
203 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
204 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
205 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
206 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
207 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
208 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
209
210 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
211 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
212 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
213
214 /* Section 4: Extended PHY Registers */
215
216 #define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
217 #define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
218 #define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
219
220 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
221 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
222 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
223
224 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
225 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
226
227 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
228 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
229
230 /* Includes ------------------------------------------------------------------*/
231 /**
232 * @brief Include module's header file
233 */
234
235 #ifdef HAL_RCC_MODULE_ENABLED
236 #include "stm32f4xx_hal_rcc.h"
237 #endif /* HAL_RCC_MODULE_ENABLED */
238
239 #ifdef HAL_GPIO_MODULE_ENABLED
240 #include "stm32f4xx_hal_gpio.h"
241 #endif /* HAL_GPIO_MODULE_ENABLED */
242
243 #ifdef HAL_DMA_MODULE_ENABLED
244 #include "stm32f4xx_hal_dma.h"
245 #endif /* HAL_DMA_MODULE_ENABLED */
246
247 #ifdef HAL_CORTEX_MODULE_ENABLED
248 #include "stm32f4xx_hal_cortex.h"
249 #endif /* HAL_CORTEX_MODULE_ENABLED */
250
251 #ifdef HAL_ADC_MODULE_ENABLED
252 #include "stm32f4xx_hal_adc.h"
253 #endif /* HAL_ADC_MODULE_ENABLED */
254
255 #ifdef HAL_CAN_MODULE_ENABLED
256 #include "stm32f4xx_hal_can.h"
257 #endif /* HAL_CAN_MODULE_ENABLED */
258
259 #ifdef HAL_CRC_MODULE_ENABLED
260 #include "stm32f4xx_hal_crc.h"
261 #endif /* HAL_CRC_MODULE_ENABLED */
262
263 #ifdef HAL_CRYP_MODULE_ENABLED
264 #include "stm32f4xx_hal_cryp.h"
265 #endif /* HAL_CRYP_MODULE_ENABLED */
266
267 #ifdef HAL_DMA2D_MODULE_ENABLED
268 #include "stm32f4xx_hal_dma2d.h"
269 #endif /* HAL_DMA2D_MODULE_ENABLED */
270
271 #ifdef HAL_DAC_MODULE_ENABLED
272 #include "stm32f4xx_hal_dac.h"
273 #endif /* HAL_DAC_MODULE_ENABLED */
274
275 #ifdef HAL_DCMI_MODULE_ENABLED
276 #include "stm32f4xx_hal_dcmi.h"
277 #endif /* HAL_DCMI_MODULE_ENABLED */
278
279 #ifdef HAL_ETH_MODULE_ENABLED
280 #include "stm32f4xx_hal_eth.h"
281 #endif /* HAL_ETH_MODULE_ENABLED */
282
283 #ifdef HAL_FLASH_MODULE_ENABLED
284 #include "stm32f4xx_hal_flash.h"
285 #endif /* HAL_FLASH_MODULE_ENABLED */
286
287 #ifdef HAL_SRAM_MODULE_ENABLED
288 #include "stm32f4xx_hal_sram.h"
289 #endif /* HAL_SRAM_MODULE_ENABLED */
290
291 #ifdef HAL_NOR_MODULE_ENABLED
292 #include "stm32f4xx_hal_nor.h"
293 #endif /* HAL_NOR_MODULE_ENABLED */
294
295 #ifdef HAL_NAND_MODULE_ENABLED
296 #include "stm32f4xx_hal_nand.h"
297 #endif /* HAL_NAND_MODULE_ENABLED */
298
299 #ifdef HAL_PCCARD_MODULE_ENABLED
300 #include "stm32f4xx_hal_pccard.h"
301 #endif /* HAL_PCCARD_MODULE_ENABLED */
302
303 #ifdef HAL_SDRAM_MODULE_ENABLED
304 #include "stm32f4xx_hal_sdram.h"
305 #endif /* HAL_SDRAM_MODULE_ENABLED */
306
307 #ifdef HAL_HASH_MODULE_ENABLED
308 #include "stm32f4xx_hal_hash.h"
309 #endif /* HAL_HASH_MODULE_ENABLED */
310
311 #ifdef HAL_I2C_MODULE_ENABLED
312 #include "stm32f4xx_hal_i2c.h"
313 #endif /* HAL_I2C_MODULE_ENABLED */
314
315 #ifdef HAL_I2S_MODULE_ENABLED
316 #include "stm32f4xx_hal_i2s.h"
317 #endif /* HAL_I2S_MODULE_ENABLED */
318
319 #ifdef HAL_IWDG_MODULE_ENABLED
320 #include "stm32f4xx_hal_iwdg.h"
321 #endif /* HAL_IWDG_MODULE_ENABLED */
322
323 #ifdef HAL_LTDC_MODULE_ENABLED
324 #include "stm32f4xx_hal_ltdc.h"
325 #endif /* HAL_LTDC_MODULE_ENABLED */
326
327 #ifdef HAL_PWR_MODULE_ENABLED
328 #include "stm32f4xx_hal_pwr.h"
329 #endif /* HAL_PWR_MODULE_ENABLED */
330
331 #ifdef HAL_RNG_MODULE_ENABLED
332 #include "stm32f4xx_hal_rng.h"
333 #endif /* HAL_RNG_MODULE_ENABLED */
334
335 #ifdef HAL_RTC_MODULE_ENABLED
336 #include "stm32f4xx_hal_rtc.h"
337 #endif /* HAL_RTC_MODULE_ENABLED */
338
339 #ifdef HAL_SAI_MODULE_ENABLED
340 #include "stm32f4xx_hal_sai.h"
341 #endif /* HAL_SAI_MODULE_ENABLED */
342
343 #ifdef HAL_SD_MODULE_ENABLED
344 #include "stm32f4xx_hal_sd.h"
345 #endif /* HAL_SD_MODULE_ENABLED */
346
347 #ifdef HAL_SPI_MODULE_ENABLED
348 #include "stm32f4xx_hal_spi.h"
349 #endif /* HAL_SPI_MODULE_ENABLED */
350
351 #ifdef HAL_TIM_MODULE_ENABLED
352 #include "stm32f4xx_hal_tim.h"
353 #endif /* HAL_TIM_MODULE_ENABLED */
354
355 #ifdef HAL_UART_MODULE_ENABLED
356 #include "stm32f4xx_hal_uart.h"
357 #endif /* HAL_UART_MODULE_ENABLED */
358
359 #ifdef HAL_USART_MODULE_ENABLED
360 #include "stm32f4xx_hal_usart.h"
361 #endif /* HAL_USART_MODULE_ENABLED */
362
363 #ifdef HAL_IRDA_MODULE_ENABLED
364 #include "stm32f4xx_hal_irda.h"
365 #endif /* HAL_IRDA_MODULE_ENABLED */
366
367 #ifdef HAL_SMARTCARD_MODULE_ENABLED
368 #include "stm32f4xx_hal_smartcard.h"
369 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
370
371 #ifdef HAL_WWDG_MODULE_ENABLED
372 #include "stm32f4xx_hal_wwdg.h"
373 #endif /* HAL_WWDG_MODULE_ENABLED */
374
375 #ifdef HAL_PCD_MODULE_ENABLED
376 #include "stm32f4xx_hal_pcd.h"
377 #endif /* HAL_PCD_MODULE_ENABLED */
378
379 #ifdef HAL_HCD_MODULE_ENABLED
380 #include "stm32f4xx_hal_hcd.h"
381 #endif /* HAL_HCD_MODULE_ENABLED */
382
383 /* Exported macro ------------------------------------------------------------*/
384 #ifdef USE_FULL_ASSERT
385 /**
386 * @brief The assert_param macro is used for function's parameters check.
387 * @param expr: If expr is false, it calls assert_failed function
388 * which reports the name of the source file and the source
389 * line number of the call that failed.
390 * If expr is true, it returns no value.
391 * @retval None
392 */
393 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
394 /* Exported functions ------------------------------------------------------- */
395 void assert_failed(uint8_t* file, uint32_t line);
396 #else
397 #define assert_param(expr) ((void)0)
398 #endif /* USE_FULL_ASSERT */
399
400
401 #ifdef __cplusplus
402 }
403 #endif
404
405 #endif /* STM32F4xx_HAL_CONF_H */
406
407
408 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/