Mercurial > public > ostc4

comparison Discovery/Inc/stm32f4xx_hal_conf.h @ 38:5f11787b4f42

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
include in ostc4 repository
author heinrichsweikamp
date Sat, 28 Apr 2018 11:52:34 +0200
parents
children f35e53ef04e0
comparison
equal deleted inserted replaced
37:ccc45c0e1ea2 38:5f11787b4f42
1 ///////////////////////////////////////////////////////////////////////////////
2 /// -*- coding: UTF-8 -*-
3 ///
4 /// \file Discovery/Inc/stm32f4xx_hal_conf.h
5 /// \brief The assert_param macro is used for function's parameters check.
6 /// \author Heinrichs Weikamp
7 /// \date 2018
8 ///
9 /// $Id$
10 ///////////////////////////////////////////////////////////////////////////////
11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
12 ///
13 /// This program is free software: you can redistribute it and/or modify
14 /// it under the terms of the GNU General Public License as published by
15 /// the Free Software Foundation, either version 3 of the License, or
16 /// (at your option) any later version.
17 ///
18 /// This program is distributed in the hope that it will be useful,
19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of
20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 /// GNU General Public License for more details.
22 ///
23 /// You should have received a copy of the GNU General Public License
24 /// along with this program. If not, see <http://www.gnu.org/licenses/>.
25 //////////////////////////////////////////////////////////////////////////////
26 /// \par COPYRIGHT(c) 2014 STMicroelectronics
27 ///
28 /// Redistribution and use in source and binary forms, with or without modification,
29 /// are permitted provided that the following conditions are met:
30 /// 1. Redistributions of source code must retain the above copyright notice,
31 /// this list of conditions and the following disclaimer.
32 /// 2. Redistributions in binary form must reproduce the above copyright notice,
33 /// this list of conditions and the following disclaimer in the documentation
34 /// and/or other materials provided with the distribution.
35 /// 3. Neither the name of STMicroelectronics nor the names of its contributors
36 /// may be used to endorse or promote products derived from this software
37 /// without specific prior written permission.
38 ///
39 /// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
40 /// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
41 /// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
42 /// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
43 /// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
44 /// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
45 /// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
46 /// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
47 /// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
48 /// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
49 //////////////////////////////////////////////////////////////////////////////
50
51 /* Define to prevent recursive inclusion -------------------------------------*/
52 #ifndef STM32F4xx_HAL_CONF_H
53 #define STM32F4xx_HAL_CONF_H
54
55 /* Exported constants --------------------------------------------------------*/
56
57 /* ######################### Hardware Selection ############################## */
58 #define STM32F429xx
59
60 /* ########################## Module Selection ############################## */
61 /**
62 * @brief This is the list of modules to be used in the HAL driver
63 */
64 #define HAL_MODULE_ENABLED
65 //#define HAL_ADC_MODULE_ENABLED
66 //#define HAL_CAN_MODULE_ENABLED
67 //#define HAL_CRC_MODULE_ENABLED
68 //#define HAL_CRYP_MODULE_ENABLED
69 //#define HAL_DAC_MODULE_ENABLED
70 //#define HAL_DCMI_MODULE_ENABLED
71 //#define HAL_ETH_MODULE_ENABLED
72 //#define HAL_NAND_MODULE_ENABLED
73 //#define HAL_NOR_MODULE_ENABLED
74 //#define HAL_PCCARD_MODULE_ENABLED
75 //#define HAL_SRAM_MODULE_ENABLED
76 //#define HAL_HASH_MODULE_ENABLED
77 //#define HAL_I2C_MODULE_ENABLED
78 //#define HAL_I2S_MODULE_ENABLED
79 //#define HAL_IWDG_MODULE_ENABLED
80 //#define HAL_RNG_MODULE_ENABLED
81 //#define HAL_SAI_MODULE_ENABLED
82 //#define HAL_SD_MODULE_ENABLED
83 //#define HAL_USART_MODULE_ENABLED
84 //#define HAL_IRDA_MODULE_ENABLED
85 //#define HAL_SMARTCARD_MODULE_ENABLED
86 //#define HAL_WWDG_MODULE_ENABLED
87 //#define HAL_PCD_MODULE_ENABLED
88 //#define HAL_HCD_MODULE_ENABLED
89 #define HAL_SDRAM_MODULE_ENABLED
90 #define HAL_GPIO_MODULE_ENABLED
91 #define HAL_LTDC_MODULE_ENABLED
92 #define HAL_DMA_MODULE_ENABLED
93 #define HAL_DMA2D_MODULE_ENABLED
94 #define HAL_RCC_MODULE_ENABLED
95 #define HAL_RTC_MODULE_ENABLED
96 #define HAL_SPI_MODULE_ENABLED
97 #define HAL_TIM_MODULE_ENABLED
98 #define HAL_UART_MODULE_ENABLED
99 #define HAL_FLASH_MODULE_ENABLED
100 #define HAL_PWR_MODULE_ENABLED
101 #define HAL_CORTEX_MODULE_ENABLED
102
103 /* ########################## HSE/HSI Values adaptation ##################### */
104 /**
105 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
106 * This value is used by the RCC HAL module to compute the system frequency
107 * (when HSE is used as system clock source, directly or through the PLL).
108 */
109 #if !defined (HSE_VALUE)
110 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
111 #endif /* HSE_VALUE */
112
113 #if !defined (HSE_STARTUP_TIMEOUT)
114 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
115 #endif /* HSE_STARTUP_TIMEOUT */
116
117 /**
118 * @brief Internal High Speed oscillator (HSI) value.
119 * This value is used by the RCC HAL module to compute the system frequency
120 * (when HSI is used as system clock source, directly or through the PLL).
121 */
122 #if !defined (HSI_VALUE)
123 #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
124 #endif /* HSI_VALUE */
125
126 /**
127 * @brief Internal Low Speed oscillator (LSI) value.
128 */
129 #if !defined (LSI_VALUE)
130 #define LSI_VALUE ((uint32_t)40000)
131 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
132 The real value may vary depending on the variations
133 in voltage and temperature. */
134 /**
135 * @brief External Low Speed oscillator (LSE) value.
136 */
137 #if !defined (LSE_VALUE)
138 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
139 #endif /* LSE_VALUE */
140
141 /**
142 * @brief External clock source for I2S peripheral
143 * This value is used by the I2S HAL module to compute the I2S clock source
144 * frequency, this source is inserted directly through I2S_CKIN pad.
145 */
146 #if !defined (EXTERNAL_CLOCK_VALUE)
147 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the External audio frequency in Hz*/
148 #endif /* EXTERNAL_CLOCK_VALUE */
149
150 /* Tip: To avoid modifying this file each time you need to use different HSE,
151 === you can define the HSE value in your toolchain compiler preprocessor. */
152
153 /* ########################### System Configuration ######################### */
154 /**
155 * @brief This is the HAL system configuration section
156 */
157
158 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
159 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */
160 #define USE_RTOS 0
161 #define PREFETCH_ENABLE 1
162 #define INSTRUCTION_CACHE_ENABLE 1
163 #define DATA_CACHE_ENABLE 1
164
165 /* ########################## Assert Selection ############################## */
166 /**
167 * @brief Uncomment the line below to expanse the "assert_param" macro in the
168 * HAL drivers code
169 */
170 /* #define USE_FULL_ASSERT 1 */
171
172 /* ################## Ethernet peripheral configuration ##################### */
173
174 /* Section 1 : Ethernet peripheral configuration */
175
176 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
177 #define MAC_ADDR0 2
178 #define MAC_ADDR1 0
179 #define MAC_ADDR2 0
180 #define MAC_ADDR3 0
181 #define MAC_ADDR4 0
182 #define MAC_ADDR5 0
183
184 /* Definition of the Ethernet driver buffers size and count */
185 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
186 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
187 #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
188 #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
189
190 /* Section 2: PHY configuration section */
191
192 /* DP83848 PHY Address*/
193 #define DP83848_PHY_ADDRESS 0x01
194 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
195 #define PHY_RESET_DELAY ((uint32_t)0x000000FF)
196 /* PHY Configuration delay */
197 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
198
199 #define PHY_READ_TO ((uint32_t)0x0000FFFF)
200 #define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
201
202 /* Section 3: Common PHY Registers */
203
204 #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
205 #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
206
207 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
208 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
209 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
210 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
211 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
212 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
213 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
214 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
215 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
216 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
217
218 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
219 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
220 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
221
222 /* Section 4: Extended PHY Registers */
223
224 #define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
225 #define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
226 #define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
227
228 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
229 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
230 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
231
232 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
233 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
234
235 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
236 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
237
238 /* Includes ------------------------------------------------------------------*/
239 /**
240 * @brief Include module's header file
241 */
242
243 #ifdef HAL_RCC_MODULE_ENABLED
244 #include "stm32f4xx_hal_rcc.h"
245 #endif /* HAL_RCC_MODULE_ENABLED */
246
247 #ifdef HAL_GPIO_MODULE_ENABLED
248 #include "stm32f4xx_hal_gpio.h"
249 #endif /* HAL_GPIO_MODULE_ENABLED */
250
251 #ifdef HAL_DMA_MODULE_ENABLED
252 #include "stm32f4xx_hal_dma.h"
253 #endif /* HAL_DMA_MODULE_ENABLED */
254
255 #ifdef HAL_CORTEX_MODULE_ENABLED
256 #include "stm32f4xx_hal_cortex.h"
257 #endif /* HAL_CORTEX_MODULE_ENABLED */
258
259 #ifdef HAL_ADC_MODULE_ENABLED
260 #include "stm32f4xx_hal_adc.h"
261 #endif /* HAL_ADC_MODULE_ENABLED */
262
263 #ifdef HAL_CAN_MODULE_ENABLED
264 #include "stm32f4xx_hal_can.h"
265 #endif /* HAL_CAN_MODULE_ENABLED */
266
267 #ifdef HAL_CRC_MODULE_ENABLED
268 #include "stm32f4xx_hal_crc.h"
269 #endif /* HAL_CRC_MODULE_ENABLED */
270
271 #ifdef HAL_CRYP_MODULE_ENABLED
272 #include "stm32f4xx_hal_cryp.h"
273 #endif /* HAL_CRYP_MODULE_ENABLED */
274
275 #ifdef HAL_DMA2D_MODULE_ENABLED
276 #include "stm32f4xx_hal_dma2d.h"
277 #endif /* HAL_DMA2D_MODULE_ENABLED */
278
279 #ifdef HAL_DAC_MODULE_ENABLED
280 #include "stm32f4xx_hal_dac.h"
281 #endif /* HAL_DAC_MODULE_ENABLED */
282
283 #ifdef HAL_DCMI_MODULE_ENABLED
284 #include "stm32f4xx_hal_dcmi.h"
285 #endif /* HAL_DCMI_MODULE_ENABLED */
286
287 #ifdef HAL_ETH_MODULE_ENABLED
288 #include "stm32f4xx_hal_eth.h"
289 #endif /* HAL_ETH_MODULE_ENABLED */
290
291 #ifdef HAL_FLASH_MODULE_ENABLED
292 #include "stm32f4xx_hal_flash.h"
293 #endif /* HAL_FLASH_MODULE_ENABLED */
294
295 #ifdef HAL_SRAM_MODULE_ENABLED
296 #include "stm32f4xx_hal_sram.h"
297 #endif /* HAL_SRAM_MODULE_ENABLED */
298
299 #ifdef HAL_NOR_MODULE_ENABLED
300 #include "stm32f4xx_hal_nor.h"
301 #endif /* HAL_NOR_MODULE_ENABLED */
302
303 #ifdef HAL_NAND_MODULE_ENABLED
304 #include "stm32f4xx_hal_nand.h"
305 #endif /* HAL_NAND_MODULE_ENABLED */
306
307 #ifdef HAL_PCCARD_MODULE_ENABLED
308 #include "stm32f4xx_hal_pccard.h"
309 #endif /* HAL_PCCARD_MODULE_ENABLED */
310
311 #ifdef HAL_SDRAM_MODULE_ENABLED
312 #include "stm32f4xx_hal_sdram.h"
313 #endif /* HAL_SDRAM_MODULE_ENABLED */
314
315 #ifdef HAL_HASH_MODULE_ENABLED
316 #include "stm32f4xx_hal_hash.h"
317 #endif /* HAL_HASH_MODULE_ENABLED */
318
319 #ifdef HAL_I2C_MODULE_ENABLED
320 #include "stm32f4xx_hal_i2c.h"
321 #endif /* HAL_I2C_MODULE_ENABLED */
322
323 #ifdef HAL_I2S_MODULE_ENABLED
324 #include "stm32f4xx_hal_i2s.h"
325 #endif /* HAL_I2S_MODULE_ENABLED */
326
327 #ifdef HAL_IWDG_MODULE_ENABLED
328 #include "stm32f4xx_hal_iwdg.h"
329 #endif /* HAL_IWDG_MODULE_ENABLED */
330
331 #ifdef HAL_LTDC_MODULE_ENABLED
332 #include "stm32f4xx_hal_ltdc.h"
333 #endif /* HAL_LTDC_MODULE_ENABLED */
334
335 #ifdef HAL_PWR_MODULE_ENABLED
336 #include "stm32f4xx_hal_pwr.h"
337 #endif /* HAL_PWR_MODULE_ENABLED */
338
339 #ifdef HAL_RNG_MODULE_ENABLED
340 #include "stm32f4xx_hal_rng.h"
341 #endif /* HAL_RNG_MODULE_ENABLED */
342
343 #ifdef HAL_RTC_MODULE_ENABLED
344 #include "stm32f4xx_hal_rtc.h"
345 #endif /* HAL_RTC_MODULE_ENABLED */
346
347 #ifdef HAL_SAI_MODULE_ENABLED
348 #include "stm32f4xx_hal_sai.h"
349 #endif /* HAL_SAI_MODULE_ENABLED */
350
351 #ifdef HAL_SD_MODULE_ENABLED
352 #include "stm32f4xx_hal_sd.h"
353 #endif /* HAL_SD_MODULE_ENABLED */
354
355 #ifdef HAL_SPI_MODULE_ENABLED
356 #include "stm32f4xx_hal_spi.h"
357 #endif /* HAL_SPI_MODULE_ENABLED */
358
359 #ifdef HAL_TIM_MODULE_ENABLED
360 #include "stm32f4xx_hal_tim.h"
361 #endif /* HAL_TIM_MODULE_ENABLED */
362
363 #ifdef HAL_UART_MODULE_ENABLED
364 #include "stm32f4xx_hal_uart.h"
365 #endif /* HAL_UART_MODULE_ENABLED */
366
367 #ifdef HAL_USART_MODULE_ENABLED
368 #include "stm32f4xx_hal_usart.h"
369 #endif /* HAL_USART_MODULE_ENABLED */
370
371 #ifdef HAL_IRDA_MODULE_ENABLED
372 #include "stm32f4xx_hal_irda.h"
373 #endif /* HAL_IRDA_MODULE_ENABLED */
374
375 #ifdef HAL_SMARTCARD_MODULE_ENABLED
376 #include "stm32f4xx_hal_smartcard.h"
377 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
378
379 #ifdef HAL_WWDG_MODULE_ENABLED
380 #include "stm32f4xx_hal_wwdg.h"
381 #endif /* HAL_WWDG_MODULE_ENABLED */
382
383 #ifdef HAL_PCD_MODULE_ENABLED
384 #include "stm32f4xx_hal_pcd.h"
385 #endif /* HAL_PCD_MODULE_ENABLED */
386
387 #ifdef HAL_HCD_MODULE_ENABLED
388 #include "stm32f4xx_hal_hcd.h"
389 #endif /* HAL_HCD_MODULE_ENABLED */
390
391 /* Exported macro ------------------------------------------------------------*/
392 #ifdef USE_FULL_ASSERT
393 /**
394 * @brief The assert_param macro is used for function's parameters check.
395 * @param expr: If expr is false, it calls assert_failed function
396 * which reports the name of the source file and the source
397 * line number of the call that failed.
398 * If expr is true, it returns no value.
399 * @retval None
400 */
401 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
402 /* Exported functions ------------------------------------------------------- */
403 void assert_failed(uint8_t* file, uint32_t line);
404 #else
405 #define assert_param(expr) ((void)0)
406 #endif /* USE_FULL_ASSERT */
407
408 #endif /* STM32F4xx_HAL_CONF_H */