ostc4: Discovery/Src/t3.c comparison

comparison Discovery/Src/t3.c @ 599:5a8f9126e4cb

Bugfix T3 skip deactivated views: I previous version the OSTC hangs if only conditional views (like decoplan which is only displayed in case of deco time) are switched. Rootcause was that the select function could never switch to another view because no visible view was available. To avoid this use case a fallback option has been added. In case no other view is available, the current view will be kept. In case no view at all (even no conditional view) is available then a switch to the "None" view will be done independend if it is enabled or not. T3_Profile: Added functionalty to show max depth and divetime of a profile provided by the replay block.

author	Ideenmodellierer
date	Mon, 04 Jan 2021 21:48:31 +0100
parents	f52bc70e380f
children	7ef2d310287d

comparison

equal deleted inserted replaced

-:0a3836643173
+:5a8f9126e4cb
 #include "math.h"
 #include "tHome.h"
 #include "timer.h"
 #include "unit.h"
 #include "motion.h"
 #include "logbook_miniLive.h"
-#define CV_PROFILE_WIDTH		(700U)
+#define CV_PROFILE_WIDTH		(600U)
 //* Imported function prototypes ---------------------------------------------*/
 extern uint8_t write_gas(char *text, uint8_t oxygen, uint8_t helium);
 /* Exported variables --------------------------------------------------------*/
 	CVIEW_T3_GasList,
 	CVIEW_T3_Navigation,
 	CVIEW_T3_DepthData,
 	CVIEW_noneOrDebug,
 	CVIEW_T3_DecoTTS,
+#ifdef ENABLE_T3_PROFILE_VIEW
 	CVIEW_T3_Profile,
+#endif
 CVIEW_T3_END
 };
 /* Private function prototypes -----------------------------------------------*/
 void t3_refresh_divemode(void);
 void t3_miniLiveLogProfile(void)
 {
 SWindowGimpStyle wintemp;
 uint16_t datalength = 0;
 uint16_t* pReplayData;
-uint16_t max_depth = 0;
+uint16_t max_depth = 10;
+char text[TEXTSIZE];
 point_t start, stop;
+uint8_t	doNotDrawLifeData = 0;
-	SSettings* pSettings;
-	pSettings = settingsGetPointer();
+uint16_t diveMinutes = 0;
 wintemp.left = t3c1.WindowX0;
 wintemp.right = t3c1.WindowX0 + CV_PROFILE_WIDTH;
 	wintemp.top = 480 - BigFontSeperationTopBottom + 5;
-	wintemp.bottom = t3c1.WindowY1 = 479 - 5;
+	wintemp.bottom = 479 - 5;
 start.x = CV_PROFILE_WIDTH + 2;
-start.y = wintemp.top;
+start.y = t3c1.WindowY0;
 stop.x = start.x;
-stop.y = wintemp.bottom;
+stop.y = t3c1.WindowY1;
 	GFX_draw_line(&t3screen, start, stop, CLUT_Font020);
 	if(getReplayOffset() != 0xFFFF)
 	{
-		getReplayInfo(&pReplayData, &datalength, &max_depth);
+		getReplayInfo(&pReplayData, &datalength, &max_depth, &diveMinutes);
 	}
 	if(max_depth < (uint16_t)(stateUsed->lifeData.max_depth_meter * 100))
 	{
 		max_depth = (uint16_t)(stateUsed->lifeData.max_depth_meter * 100);
 	{
 		GFX_graph_print(&t3screen, &wintemp, 0,1,0, max_depth, pReplayData, datalength, CLUT_Font031, NULL);
 	}
 	else
 	{
-		datalength = 750;
+		datalength = getMiniLiveReplayLength();
+		if(datalength < CV_PROFILE_WIDTH)
+		{
+			if(datalength < 3)			/* wait for some data entries to start graph */
+			{
+				doNotDrawLifeData = 1;
+			}
+			datalength = CV_PROFILE_WIDTH;
+		}
+		diveMinutes = 0;	/* do not show divetime because it is already shown in the upper field */
 	}
-GFX_graph_print(&t3screen, &wintemp, 0,1,0, max_depth, getMiniLiveReplayPointerToData(), datalength, CLUT_Font030, NULL);
+	if(diveMinutes != 0)
+	{
+		snprintf(text,TEXTSIZE,"\002%dmin",diveMinutes);
+		GFX_write_string(&FontT42,&t3c1,text,1);
+	}
+snprintf(text,TEXTSIZE,"\002%01.1fm", max_depth / 100.0);
+GFX_write_string(&FontT42,&t3c1,text,0);
+if(!doNotDrawLifeData)
+{
+	GFX_graph_print(&t3screen, &wintemp, 0,1,0, max_depth, getMiniLiveReplayPointerToData(), datalength, CLUT_Font030, NULL);
+}
 }
 void t3_refresh(void)
 {
 void t3_set_customview_to_primary(void)
 {
 if(stateUsed->mode == MODE_DIVE)
 {
 	t3_selection_customview = settingsGetPointer()->tX_customViewPrimaryBF;
+	t3_change_customview(ACTION_END);
 }
 }
 /* Private functions ---------------------------------------------------------*/
 GFX_write_string(&FontT105,tXc1,text,0);
 t3_basics_compass(tXscreen, center, heading, stateUsed->diveSettings.compassHeading);
 break;
 case CVIEW_T3_Profile:
-snprintf(text,100,"\032\f\001%c%c",TXT_2BYTE,TXT2BYTE_Profile);
+snprintf(text,100,"\032\f\002%c%c",TXT_2BYTE,TXT2BYTE_Profile);
 GFX_write_string(&FontT42,tXc1,text,0);
 t3_miniLiveLogProfile();
 	break;
 case CVIEW_T3_DecoTTS:
 case CVIEW_T3_Decostop:
 else
 pDecoinfo = &stateUsed->decolistVPM;
 uint8_t curViewIdx = 0xff;
 uint8_t index = 0;
+uint8_t indexOverrun = 0;
 uint8_t lastViewIdx = 0;
-uint8_t iterate = 0;	/* set to 1 if a view has to be skipped */
+uint8_t iterate = 0;									/* set to 1 if a view has to be skipped */
+uint8_t useFallback = 0;								/* is set if the current view is disabled */
+uint8_t fallbackSelection = CVIEW_noneOrDebug;			/* show "None" view per default */
 /* set pointer to currently selected view and count number of entries */
 while((tX_customviews[index] != CVIEW_T3_END))
 {
 	if (tX_customviews[index] == *tX_selection_customview)
 	index++;
 }
 if(curViewIdx == 0xff)		/* called with unknown view */
 {
 	curViewIdx = 0;
-	*tX_selection_customview = tX_customviews[index];
+	*tX_selection_customview = CVIEW_noneOrDebug;		/* show "None" view per default */
 }
 lastViewIdx = index;
 index = curViewIdx;
 do
 {
 					index++;
 				}
 				if(tX_customviews[index] == CVIEW_T3_END)
 				{
 					index = 0;
+					indexOverrun = 1;
 				}
 				break;
 		case ACTION_PITCH_NEG:
 			if(index == 0)
 			{
 				index = lastViewIdx - 1;
+				indexOverrun = 1;
 			}
 			else
 			{
 				index--;
 			}
 		}
 		if(t3_customview_disabled(tX_customviews[index]))
 		{
 			iterate = 1;
+			if(*tX_selection_customview == tX_customviews[index])
+			{
+				useFallback = 1;		/* the provided view is disabled => use fallback */
+			}
 		}
-	    if((tX_customviews[index] == CVIEW_T3_TTS) && !pDecoinfo->output_time_to_surface_seconds)	/* Skip TTS if value is 0 */
+		else	/* special case which are enabled but not to be displayed at the moment */
-	    {
+		{
-	    	iterate = 1;
+			if(settingsGetPointer()->MotionDetection != MOTION_DETECT_SECTOR)		/* no hiding in case of active sector view option (fixed mapping would change during dive) */
-	    }
+			{
-	    if((tX_customviews[index] == CVIEW_T3_Decostop) && ((!pDecoinfo->output_ndl_seconds) && (!pDecoinfo->output_time_to_surface_seconds) && (timer_Safetystop_GetCountDown() == 0)))			/* Skip Deco if NDL is not set */
+				if((tX_customviews[index] == CVIEW_T3_TTS) && !pDecoinfo->output_time_to_surface_seconds)	/* Skip TTS if value is 0 */
-	    {
+				{
-	       	iterate = 1;
+					iterate = 1;
-	    }
+					fallbackSelection = CVIEW_T3_TTS;
-	    if((iterate) && (action == ACTION_END))
+				}
+				if((tX_customviews[index] == CVIEW_T3_Decostop) && ((!pDecoinfo->output_ndl_seconds) && (!pDecoinfo->output_time_to_surface_seconds) && (timer_Safetystop_GetCountDown() == 0)))			/* Skip Deco if NDL is not set */
+				{
+					iterate = 1;
+					fallbackSelection = CVIEW_T3_Decostop;
+				}
+			}
+		}
+	    if((iterate) && (action == ACTION_END))			/* ACTION_END is used to check the enable state of the provided view. If it is enable the function will return without change */
 	    {
 	    	action = ACTION_BUTTON_ENTER;
 	    }
-}while (iterate == 1);
+}while ((iterate == 1) && (!((indexOverrun == 1) && (*tX_selection_customview == tX_customviews[index]))));		/* no other available view found => use fallback */
-*tX_selection_customview = tX_customviews[index];
+if(*tX_selection_customview == tX_customviews[index])
+	{
+	if(useFallback)
+	{
+		   	*tX_selection_customview = fallbackSelection;		/* no active view found => keep actual view or change to fallback if actual view is deactivated */
+	}
+	}
+else
+{
+	*tX_selection_customview = tX_customviews[index];
+}
 }
 void t3_basics_colorscheme_mod(char *text)
 {

Mercurial > public > ostc4

comparison Discovery/Src/t3.c @ 599:5a8f9126e4cb