Mercurial > public > ostc4
annotate Discovery/Src/show_logbook.c @ 923:6fc0e3d230e4 Evo_2_23 tip
UART6 DMA handling:
Make sure that RX transmission uses DMA stream 2
| author | Ideenmodellierer |
|---|---|
| date | Mon, 04 Nov 2024 20:21:02 +0100 |
| parents | aa6006975e76 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/show_logbook.c | |
| 5 /// \brief show_logbook_logbook_show_log_page1 / | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 07-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include "base.h" | |
| 30 #include "logbook.h" | |
| 31 #include "gfx_colors.h" | |
| 32 #include "gfx_engine.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "show_logbook.h" | |
| 35 #include "unit.h" | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
36 #include "configuration.h" |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
37 #include "logbook_miniLive.h" |
| 662 | 38 #include "text_multilanguage.h" |
| 38 | 39 |
| 40 #include <stdint.h> | |
| 41 #include <stdio.h> | |
| 42 #include <stdlib.h> // for abs() | |
| 43 | |
| 484 | 44 #define LOG_BORDER_OFFSET (50u) /* text offset from left / right display to text start/end */ |
| 45 | |
| 38 | 46 /* Private variables ---------------------------------------------------------*/ |
| 47 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
48 static GFX_DrawCfgScreen tLOGscreen; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
49 static GFX_DrawCfgScreen tLOGbackground; |
| 38 | 50 |
| 51 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
52 static void print_gas_name(char* output,uint8_t lengh,uint8_t oxygen,uint8_t helium); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
53 static int16_t get_colour(int16_t color); |
| 38 | 54 |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
55 static uint8_t active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
56 static uint8_t active_log_offset = 0; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
57 |
| 38 | 58 /* Overview */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
59 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 60 /* Temperature */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
61 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 62 /* Gas List */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
63 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 64 /* ppO2 */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
65 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 66 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
67 static inline uint32_t MaxU32LOG(uint32_t a, uint32_t b) |
| 38 | 68 { |
| 69 return((a>b)?a:b); | |
| 70 } | |
| 71 | |
| 72 /** | |
| 73 ****************************************************************************** | |
| 74 * @brief GFX write label. / print coordinate system & depth graph | |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
662
diff
changeset
|
75 * @author heinrichs weikamp gmbh |
| 38 | 76 * @version V0.0.1 |
| 77 * @date 07-July-2014 | |
| 78 ****************************************************************************** | |
| 79 * | |
| 80 * @param hgfx: | |
| 81 * @param window: WindowGimpStyle | |
| 82 * @param mode: different modes depending witch page uses the function | |
| 83 * @param dataLength: | |
| 84 * @param depthdata: | |
| 85 * @param colordata: 1 | |
| 86 * @retval None | |
| 87 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
88 static void show_logbook_draw_depth_graph(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards, SWindowGimpStyle* window, short mode, uint16_t dataLength, uint16_t* depthdata, uint8_t * colordata, uint16_t * decostopdata) |
| 38 | 89 { |
| 90 SLogbookHeader logbookHeader; | |
| 91 SWindowGimpStyle wintemp = *window; | |
| 92 SWindowGimpStyle winsmal; | |
| 93 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 94 int divetime = logbookHeader.diveTimeMinutes; | |
| 95 int maxDepth = logbookHeader.maxDepth/100; | |
| 96 | |
| 97 int16_t saveBottom = wintemp.bottom; | |
| 98 int16_t saveTop = 0 - wintemp.top; | |
| 99 | |
| 100 //*** Horisontal (depth) *************************************************** | |
| 101 | |
| 102 //--- calc depth lines and labels -- | |
| 103 int vscale = 0; | |
| 104 int vstep = 0; | |
| 105 | |
| 106 vstep = maxDepth / 5; | |
| 107 vscale = vstep * 5; | |
| 108 if(vscale < maxDepth) | |
| 109 { | |
| 110 vstep += 1; | |
| 111 vscale += 5; | |
| 112 } | |
| 113 /* | |
| 114 if(vscale < | |
| 115 for(int i=1; i <= 20; i++) | |
| 116 { | |
| 117 vscale = i * 25; | |
| 118 vstep = i * 5; | |
| 119 if( vscale > maxDepth) | |
| 120 break; | |
| 121 } | |
| 122 */ | |
| 123 //--- print depth labels --- | |
| 124 winsmal.left = wintemp.left - 48; | |
| 125 winsmal.top = wintemp.top - 3; | |
| 126 winsmal.right = wintemp.left -1; | |
| 127 winsmal.bottom = winsmal.top + 16; | |
| 128 | |
| 567 | 129 if(settingsGetPointer()->nonMetricalSystem) |
| 130 { | |
| 131 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[ft]"); | |
| 132 } | |
| 133 else | |
| 134 { | |
| 135 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[m]"); | |
| 136 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
137 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
138 // winsmal.left = wintemp.left - 48; |
| 632 | 139 char msg[10]; |
| 38 | 140 float deltaline = ((float)(wintemp.bottom - wintemp.top))/5; |
| 141 for(int i = 1; i<=5; i++) | |
| 142 { | |
| 143 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 144 winsmal.bottom = winsmal.top + 16; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
145 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
146 // winsmal.right = wintemp.left - 2; |
| 632 | 147 snprintf(msg,10,"%i",unit_depth_integer(i * vstep)); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
148 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 149 } |
| 150 | |
| 151 //vertical (Time) ******************************************************************* | |
| 152 //--- calc time lines and labels -- | |
| 153 int timestep = 0; | |
| 154 int lines = 0; | |
| 155 for(int i=1; i <= 60; i++) | |
| 156 { | |
| 157 timestep = i * 5; | |
| 158 lines = divetime/timestep; | |
| 159 if(lines < 7) | |
| 160 { | |
| 161 break; | |
| 162 } | |
| 163 } | |
| 164 //*** print coordinate system grit *** | |
| 165 int winwidth = wintemp.right - wintemp.left; | |
| 166 float vdeltaline = ((float)(winwidth * timestep))/divetime; | |
| 167 GFX_draw_Grid( &tLOGbackground,wintemp, 0, vdeltaline, 5,0, CLUT_LogbookGrid); | |
| 168 | |
| 169 | |
| 170 //--- print time labels --- | |
| 171 winsmal.left = wintemp.left; | |
| 172 winsmal.top = wintemp.top - 40; | |
| 173 winsmal.right = winsmal.left + 60; | |
| 174 winsmal.bottom = winsmal.top + 16; | |
| 175 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
176 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"min"); |
| 38 | 177 for(int i = 1; i<=lines; i++) |
| 178 { | |
| 179 winsmal.left= wintemp.left + vdeltaline * i - 15; | |
| 180 winsmal.right = winsmal.left + 30; | |
| 632 | 181 snprintf(msg,10,"%3i",i * timestep); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
182 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 183 } |
| 184 winsmal.left = wintemp.left;// - 9; | |
| 185 winsmal.top = wintemp.top - 40; | |
| 186 winsmal.right = winsmal.left + 60; | |
| 187 | |
| 188 //--- print depth graph --- | |
| 189 //adapt window | |
| 190 int winhight = wintemp.bottom - wintemp.top; | |
| 191 int newhight = (winhight * maxDepth)/vscale; | |
| 192 wintemp.bottom = wintemp.top + newhight; | |
| 193 //wintemp.fontcolor = LOGBOOK_GRAPH_DEPTH; | |
| 194 | |
| 195 int datamax = 0; | |
| 196 for(int i=0;i<dataLength;i++) | |
| 197 { | |
| 198 if(depthdata[i]>datamax) | |
| 199 datamax = depthdata[i]; | |
| 200 } | |
| 201 | |
| 202 if(decostopdata) | |
| 203 { | |
| 204 if(dataLength <= 1000) | |
| 205 { | |
| 206 uint8_t colortemp[1000]; | |
| 207 | |
| 208 for(int i = 0; i<dataLength; i++) | |
| 209 { | |
| 210 if(decostopdata[i] > depthdata[i]) | |
| 211 { | |
| 212 colortemp[i] = CLUT_WarningRed; | |
| 213 } | |
| 214 else | |
| 215 { | |
| 216 colortemp[i] = CLUT_NiceGreen; | |
| 217 } | |
| 218 } | |
|
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
150
diff
changeset
|
219 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, 0, colortemp); |
| 38 | 220 } |
| 221 else | |
| 222 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, CLUT_NiceGreen, NULL); | |
| 223 } | |
| 224 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
225 if(settingsGetPointer()->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
226 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
227 winsmal.right = 800 - wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
228 winsmal.left = 800 - wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
229 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
230 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
231 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
232 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
233 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
234 winsmal.right = wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
235 winsmal.left = wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
236 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
237 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
238 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
239 |
| 38 | 240 switch(mode) |
| 241 { | |
| 242 case 0: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
243 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 244 break; |
| 245 case 1: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
246 GFX_graph_print(hgfx,&winsmal,saveBottom,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 247 break; |
| 248 case 2: | |
| 249 if(*colordata) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
250 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 251 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
252 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 253 } |
| 254 } | |
| 255 | |
| 256 | |
| 257 | |
| 258 /** | |
| 259 ****************************************************************************** | |
| 260 * @brief scaleAdapt | |
| 261 * @author heinrichs weikamp gmbh | |
| 262 * @version V0.0.1 | |
| 263 * @date 29-Nov-2016 | |
| 264 ****************************************************************************** | |
| 265 * | |
| 266 * @param ... | |
| 267 * @retval *OutputStepOfScale, *OutputMaxValueOnScale, *OutputTop, *OutputBottom | |
| 268 | |
| 269 * fit to multiples of 1�C (data format is 1/10�C) | |
| 270 */ | |
| 271 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
272 static void scaleAdapt( int InputTop, int InputBottom, |
| 38 | 273 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 274 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 275 { | |
| 276 // uint16_t oldScale; | |
| 277 uint16_t newScale; | |
| 278 // uint16_t diff_newScale; | |
| 279 | |
| 280 // int16_t oldMaxOnScale; | |
| 281 int16_t newMaxOnScale; | |
| 282 // int16_t diff_newMaxOnScale; | |
| 283 _Bool negativeMaxValue = 0; | |
| 284 | |
| 285 // float oldRange; | |
| 286 float newRange; | |
| 287 | |
| 288 float sizeOfScreen; | |
| 289 // float InputTopValue; | |
| 290 // float InputBottomValue; | |
| 291 float screenToRangeRatio; | |
| 292 float diffOutMaxToMaxOnScale; | |
| 293 float diffOutMinToMaxOnScale; | |
| 294 int positonOutputMaxValue; | |
| 295 int positonOutputMinValue; | |
| 296 | |
| 297 | |
| 298 // scale | |
| 299 // oldScale = *OutputStepOfScale; | |
| 300 newScale = *OutputStepOfScale + 9; | |
| 301 newScale /= 10; | |
| 302 newScale *= 10; | |
| 303 // diff_newScale = newScale - *OutputStepOfScale; | |
| 304 // oldRange = 5 * oldScale; | |
| 305 newRange = 5 * newScale; | |
| 306 *OutputStepOfScale = newScale; | |
| 307 | |
| 308 // MaxValueOnScale | |
| 309 // oldMaxOnScale = *OutputMaxValueOnScale; | |
| 310 if(OutputMaxValueOnScale < 0) | |
| 311 { | |
| 312 negativeMaxValue = 1; | |
| 313 newMaxOnScale = 0 - *OutputMaxValueOnScale; | |
| 314 } | |
| 315 else | |
| 316 { | |
| 317 negativeMaxValue = 0; | |
| 318 newMaxOnScale = *OutputMaxValueOnScale; | |
| 319 } | |
| 320 newMaxOnScale += 9; | |
| 321 newMaxOnScale /= 10; | |
| 322 newMaxOnScale *= 10; | |
| 323 if(negativeMaxValue) | |
| 324 { | |
| 325 // diff_newMaxOnScale = newMaxOnScale + *OutputMaxValueOnScale; | |
| 326 *OutputMaxValueOnScale = 0 - newMaxOnScale; | |
| 327 } | |
| 328 else | |
| 329 { | |
| 330 // diff_newMaxOnScale = newMaxOnScale - *OutputMaxValueOnScale; | |
| 331 *OutputMaxValueOnScale = newMaxOnScale; | |
| 332 } | |
| 333 | |
| 334 | |
| 335 // new coordinates | |
| 336 sizeOfScreen = 1 + InputBottom - InputTop; | |
| 337 // InputTopValue = *OutputMaxValueOnScale; | |
| 338 // InputBottomValue = InputTopValue + (6 * *OutputStepOfScale); | |
| 339 | |
| 340 screenToRangeRatio = sizeOfScreen / newRange; | |
| 341 diffOutMaxToMaxOnScale = abs(*OutputMaxValueOnScale) - abs(*OutputMaxValue); | |
| 342 // diffOutMinToMax = abs(*OutputMinValue - *OutputMaxValue); | |
| 343 diffOutMinToMaxOnScale = abs(*OutputMaxValueOnScale - *OutputMinValue); | |
| 344 | |
| 345 positonOutputMaxValue = (int)(diffOutMaxToMaxOnScale * screenToRangeRatio); | |
| 346 positonOutputMaxValue += *OutputTop; | |
| 347 positonOutputMinValue = (int)(diffOutMinToMaxOnScale * screenToRangeRatio); | |
| 348 positonOutputMinValue += *OutputTop; | |
| 349 // positonOutputMinValue = (int)(diffOutMinToMax * screenToRangeRatio); | |
| 350 // positonOutputMinValue += positonOutputMaxValue; | |
| 351 *OutputTop = positonOutputMaxValue; | |
| 352 *OutputBottom = positonOutputMinValue; | |
| 353 } | |
| 354 | |
| 355 | |
| 356 /** | |
| 357 ****************************************************************************** | |
| 358 * @brief scaleHelper | |
| 359 * @author heinrichs weikamp gmbh | |
| 360 * @version V0.0.1 | |
| 361 * @date 13-Oct-2016 | |
| 362 ****************************************************************************** | |
| 363 * | |
| 364 * @param hgfx: | |
| 365 * @retval None | |
| 366 | |
| 367 * pixel 50 oben | |
| 368 * pixel 439 unten | |
| 369 * pixel 390 gesamt h�he | |
| 370 | |
| 371 * for temperature, input is �C * 10 | |
| 372 */ | |
| 373 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
374 static void scaleHelper( uint16_t InputDataLength, int16_t *InputDataArray, int InputTop, int InputBottom, |
| 38 | 375 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 376 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 377 { | |
| 378 int32_t datamin = INT16_MAX; // 32 bit for delta calculation ( delta is unsigned -> value can be 2x INT16_MAX) | |
| 379 int32_t datamax = INT16_MIN; | |
| 380 uint16_t deltaMinMax = 1; | |
| 381 // uint16_t deltaMinMaxUsed = 1; | |
| 382 // uint16_t digits = 1; | |
| 383 // uint16_t scaler = 1; | |
| 384 uint32_t step = 1; | |
| 385 const int sizeOfScreen = InputBottom - InputTop; | |
| 386 float pixel2range = 1.0; | |
| 387 | |
| 388 // min, max, deltaMinMax, OutputMinValue, OutputMaxValue | |
| 389 for(uint16_t i = 0; i < InputDataLength; i++) | |
| 390 { | |
| 391 if(InputDataArray[i] > datamax) | |
| 392 datamax = InputDataArray[i]; | |
| 393 | |
| 394 if(InputDataArray[i] < datamin) | |
| 395 datamin = InputDataArray[i]; | |
| 396 } | |
| 397 | |
| 398 deltaMinMax = (uint16_t)(datamax - datamin); | |
| 399 | |
| 400 *OutputMinValue = (int16_t)datamin; | |
| 401 *OutputMaxValue = (int16_t)datamax; | |
| 402 | |
| 403 // step | |
| 404 step = deltaMinMax / 5; | |
| 405 while(deltaMinMax > (step * 5)) | |
| 406 { | |
| 407 step += 1; | |
| 408 } | |
| 409 pixel2range = ((float)sizeOfScreen) / (step * 5); | |
| 410 | |
| 411 *OutputStepOfScale = (uint16_t)step; | |
| 412 *OutputMaxValueOnScale = *OutputMaxValue; | |
| 413 *OutputTop = InputTop; | |
| 414 *OutputBottom = ((int)(pixel2range * deltaMinMax)) + *OutputTop; | |
| 415 } | |
| 416 | |
| 417 /** | |
| 418 ****************************************************************************** | |
| 419 * @brief show_logbook_logbook_show_log_page1 / | |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
662
diff
changeset
|
420 * @author heinrichs weikamp gmbh |
| 38 | 421 * @version V0.0.1 |
| 422 * @date 07-July-2014 | |
| 423 ****************************************************************************** | |
| 424 * | |
| 425 * @param hgfx: | |
| 426 * @retval None | |
| 427 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
428 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx,uint8_t StepBackwards) |
| 38 | 429 { |
| 430 SWindowGimpStyle wintemp; | |
| 431 SWindowGimpStyle winsmal; | |
| 484 | 432 wintemp.left = LOG_BORDER_OFFSET; |
| 38 | 433 wintemp.right = 799 - wintemp.left; |
| 484 | 434 wintemp.top = LOG_BORDER_OFFSET; |
| 38 | 435 wintemp.bottom = 479 - 40; |
| 567 | 436 char timeSuffix; |
| 437 uint8_t hoursToDisplay; | |
| 38 | 438 |
| 439 SLogbookHeader logbookHeader; | |
| 440 logbook_getHeader(StepBackwards ,&logbookHeader); | |
| 441 | |
| 442 uint16_t depthdata[1000] = { 0 }; | |
| 443 uint8_t gasdata[1000] = { 0 }; | |
| 444 int16_t tempdata[1000] = { 0 }; | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
445 uint16_t tankdata[1000] = { 0 }; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
446 |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
447 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
448 uint16_t bottlePressureStart = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
449 uint16_t bottlePressureEnd = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
450 uint16_t loop = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
451 #endif |
| 38 | 452 |
| 453 uint16_t dataLength = 0; | |
| 610 | 454 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, tankdata,NULL); |
| 38 | 455 |
| 456 //Print Date | |
| 457 uint8_t year = logbookHeader.dateYear; | |
| 458 uint8_t month = logbookHeader.dateMonth; | |
| 459 uint8_t day = logbookHeader.dateDay; | |
| 460 char text[40]; | |
| 461 snprintf(text, 20, "20%02i-%02i-%02i", year, month, day); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
462 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
463 Gfx_write_label_var(hgfx, 30, 250,10, &FontT42,CLUT_GasSensor1,text); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
464 |
| 38 | 465 |
| 466 // Print logbook number with offset | |
| 467 if(settingsGetPointer()->logbookOffset) | |
| 468 { | |
| 469 int32_t logNumber; | |
| 470 logNumber = settingsGetPointer()->logbookOffset - StepBackwards; | |
| 471 if(logNumber < 0) | |
| 472 logNumber = 0; | |
| 473 else | |
| 474 if(logNumber > 9999) | |
| 475 logNumber = 9999; | |
| 476 | |
| 457 | 477 snprintf(text,20,"#%ld",logNumber); |
| 38 | 478 Gfx_write_label_var(hgfx, 300, 590,10, &FontT42,CLUT_GasSensor1,text); |
| 479 } | |
| 480 | |
| 481 //Print time | |
| 482 uint8_t minute = logbookHeader.timeMinute; | |
| 567 | 483 |
| 484 if (settingsGetPointer()->amPMTime) | |
| 485 { | |
| 486 if (logbookHeader.timeHour > 11) | |
| 487 { | |
| 488 timeSuffix = 'P'; | |
| 489 } | |
| 490 else | |
| 491 { | |
| 492 timeSuffix = 'A'; | |
| 493 } | |
| 494 | |
| 495 if (logbookHeader.timeHour % 12 == 0) | |
| 496 { | |
| 497 hoursToDisplay = 12; | |
| 498 } | |
| 499 else | |
| 500 { | |
| 501 hoursToDisplay = (logbookHeader.timeHour % 12); | |
| 502 } | |
| 503 | |
| 504 snprintf(text,20,"\002%02i:%02i %cM",hoursToDisplay,minute,timeSuffix); | |
| 505 } | |
| 506 else | |
| 507 { | |
| 508 hoursToDisplay = logbookHeader.timeHour; | |
| 509 snprintf(text,20,"\002%02i:%02i",hoursToDisplay,minute); | |
| 510 } | |
| 511 | |
| 512 | |
| 484 | 513 Gfx_write_label_var(hgfx, 600, wintemp.right,10, &FontT42,CLUT_GasSensor1,text); |
| 38 | 514 |
| 515 //Print Dive Mode (OC/CCR/...) | |
| 516 switch(logbookHeader.diveMode) | |
| 517 { | |
| 518 case DIVEMODE_OC: | |
| 662 | 519 snprintf(text,20,"%c",TXT_OpenCircuit); |
| 38 | 520 break; |
| 521 case DIVEMODE_CCR: | |
| 662 | 522 snprintf(text,20,"%c",TXT_ClosedCircuit); |
| 38 | 523 break; |
| 524 case DIVEMODE_Gauge: | |
| 662 | 525 snprintf(text,20,"%c",TXT_Gauge); |
| 38 | 526 break; |
| 527 case DIVEMODE_Apnea: | |
| 662 | 528 snprintf(text,20,"%c",TXT_Apnoe); |
| 529 break; | |
| 530 case DIVEMODE_PSCR: | |
| 531 snprintf(text,20,"%c",TXT_PSClosedCircuit); | |
| 38 | 532 break; |
| 533 } | |
| 534 Gfx_write_label_var(hgfx, 30, 250,60, &FontT42,CLUT_GasSensor4,text); | |
| 535 | |
| 536 // Decomodel | |
| 537 if(logbookHeader.diveMode <= DIVEMODE_CCR) | |
| 538 { | |
| 539 switch(logbookHeader.decoModel) | |
| 540 { | |
| 541 case GF_MODE: | |
| 542 snprintf(text,20,"\002GF%u/%u",logbookHeader.gfLow_or_Vpm_conservatism,logbookHeader.gfHigh); | |
| 484 | 543 break; |
| 38 | 544 case VPM_MODE: |
| 545 snprintf(text,20,"\002VPM +%u",logbookHeader.gfLow_or_Vpm_conservatism); | |
| 484 | 546 break; |
| 547 default: | |
| 548 snprintf(text,20," "); /* no information to be displayed */ | |
| 549 break; | |
| 38 | 550 } |
| 484 | 551 Gfx_write_label_var(hgfx, 500, wintemp.right,60, &FontT42,CLUT_GasSensor1,text); |
| 38 | 552 } |
| 553 | |
| 554 //Write Dive Time | |
| 555 int minutes = logbookHeader.diveTimeMinutes; | |
| 556 int seconds = logbookHeader.diveTimeSeconds; | |
| 557 int hours = minutes/60; | |
| 558 minutes -= hours * 60; | |
| 559 snprintf(text,20,"%02i:%02i:%02i",hours,minutes,seconds); | |
| 560 Gfx_write_label_var(hgfx, 30, 250,360, &FontT42,CLUT_GasSensor1,text); | |
| 561 Gfx_write_label_var(hgfx, 200, 250,360, &FontT42,CLUT_GasSensor4,"s"); | |
| 562 | |
| 563 // Max Depth | |
| 564 int maxdepth =logbookHeader.maxDepth/100; | |
| 565 int maxdepth_dcm = logbookHeader.maxDepth/10 - maxdepth * 10; | |
| 566 int top = 150; | |
| 567 if(settingsGetPointer()->nonMetricalSystem) | |
| 568 { | |
| 569 float maxDepthFeet = 0; | |
| 570 maxDepthFeet = unit_depth_float(((float)logbookHeader.maxDepth)/100); | |
| 571 snprintf(text,20,"%.0f",maxDepthFeet); | |
| 572 } | |
| 573 else | |
| 574 { | |
| 575 snprintf(text,20,"%i.%i",maxdepth,maxdepth_dcm); | |
| 576 } | |
| 577 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 578 winsmal.left = 30; | |
| 579 winsmal.top = top -3; | |
| 580 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
581 |
| 38 | 582 if(maxdepth < 10) |
| 583 { | |
| 584 winsmal.left = 137; | |
| 585 } | |
| 586 else if(maxdepth < 100) | |
| 587 { | |
| 588 winsmal.left = 151; | |
| 589 } | |
| 590 else | |
| 591 { | |
| 592 winsmal.left = 147; | |
| 593 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
594 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
595 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
596 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,top, &FontT24,CLUT_GasSensor4,"max"); |
| 38 | 597 snprintf(text,3,"%c%c" |
| 598 , unit_depth_char1() | |
| 599 , unit_depth_char2() | |
| 600 ); | |
| 601 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 602 | |
| 603 // Average Depth | |
| 604 int avrdepth =logbookHeader.averageDepth_mbar/100; | |
| 605 int avrdepth_dcm = logbookHeader.averageDepth_mbar/10 - avrdepth * 10; | |
| 606 top = 200; | |
| 607 if(settingsGetPointer()->nonMetricalSystem) | |
| 608 { | |
| 609 float avgDepthFeet = 0; | |
| 610 avgDepthFeet = unit_depth_float(((float)logbookHeader.averageDepth_mbar)/100); | |
| 611 snprintf(text,20,"%.0f",avgDepthFeet); | |
| 612 } | |
| 613 else | |
| 614 { | |
| 615 snprintf(text,20,"%i.%i",avrdepth,avrdepth_dcm); | |
| 616 } | |
| 617 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
618 |
| 38 | 619 winsmal.left = 30; |
| 620 winsmal.top = top -3; | |
| 621 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
622 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
623 /* put avg behind previous string */ |
| 38 | 624 if(avrdepth < 10) |
| 625 { | |
| 626 winsmal.left = 137 ; | |
| 627 } | |
| 628 else if(avrdepth < 100) | |
| 629 { | |
| 630 winsmal.left = 151; | |
| 631 } | |
| 632 else | |
| 633 { | |
| 634 winsmal.left = 147; | |
| 635 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
636 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
637 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
638 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor4,"avg"); |
| 38 | 639 snprintf(text,3,"%c%c" |
| 640 , unit_depth_char1() | |
| 641 , unit_depth_char2() | |
| 642 ); | |
| 643 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 644 // Temperature | |
| 645 top+= 50; | |
| 646 float temp_Temperature; | |
| 647 uint16_t start; | |
| 648 temp_Temperature = ((float)logbookHeader.minTemp)/10; | |
| 649 snprintf(text,20,"%.1f",unit_temperature_float(temp_Temperature)); | |
| 650 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 651 | |
| 652 if(settingsGetPointer()->nonMetricalSystem) | |
| 653 start = 121; | |
| 654 else if((logbookHeader.minTemp >= 0) && (logbookHeader.minTemp < 10)) | |
| 655 start = 100; | |
| 656 else if((logbookHeader.minTemp >= -10) && (logbookHeader.minTemp < 100)) | |
| 657 start = 114; | |
| 658 else | |
| 659 start = 121; | |
| 660 | |
| 661 text[0] = '\140'; | |
| 662 if(settingsGetPointer()->nonMetricalSystem) | |
| 663 text[1] = 'F'; | |
| 664 else | |
| 665 text[1] = 'C'; | |
| 666 text[2] = 0; | |
| 667 | |
| 668 Gfx_write_label_var(hgfx, start, 300,top, &FontT42,CLUT_GasSensor4,text); | |
| 669 | |
| 670 // CNS | |
| 671 snprintf(text,20,"CNS: %i %%",logbookHeader.maxCNS); | |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
672 Gfx_write_label_var(hgfx, 30, 250,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 673 |
| 674 // Surface Pressure | |
| 675 // snprintf(text,20,"\001%i\016\016 mbar",logbookHeader.surfacePressure_mbar); | |
| 676 // Gfx_write_label_var(hgfx,300,500,750, &FontT42,CLUT_GasSensor1,text); | |
| 677 // snprintf(text,40,"%i\016\016 mbar\017 (%i\016\016 m\017)",logbookHeader.surfacePressure_mbar, unit_SeaLevelRelation_integer(logbookHeader.surfacePressure_mbar)); | |
|
102
4276d56eb37c
hPa instead of mbar, enabled Spanish language
heinrichsweikamp
parents:
38
diff
changeset
|
678 snprintf(text,40,"%i\016\016 hPa\017",logbookHeader.surfacePressure_mbar); |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
679 Gfx_write_label_var(hgfx,320,600,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 680 |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
681 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
682 /* show symbol in case log entry is marked for usage in profile custom view */ |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
683 snprintf(text,10,"\002>"); |
|
616
a594a778c883
Development bugfix: show replay symbol only for the selected dive:
Ideenmodellierer
parents:
610
diff
changeset
|
684 if(StepBackwards == getReplayOffset()) |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
685 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
686 Gfx_write_label_var(hgfx,750,799,440, &FontT42,CLUT_GasSensor1,text); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
687 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
688 else |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
689 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
690 Gfx_write_label_var(hgfx,750,799,440, &FontT42,CLUT_MenuTopBackground,text); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
691 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
692 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
693 |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
694 /* Show tank info */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
695 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
696 for(loop = 0; loop < dataLength; loop++) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
697 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
698 if((bottlePressureStart == 0) && (tankdata[loop] != 0)) /* find first pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
699 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
700 bottlePressureStart = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
701 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
702 if((tankdata[loop] != 0)) /* store last pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
703 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
704 bottlePressureEnd = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
705 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
706 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
707 if(bottlePressureStart != 0) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
708 { |
| 484 | 709 snprintf(text,40,"\002%i | %i\016\016 Bar\017",bottlePressureStart,bottlePressureEnd); |
| 710 Gfx_write_label_var(hgfx,450,wintemp.right,440, &FontT42,CLUT_GasSensor1,text); | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
711 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
712 #endif |
| 38 | 713 //--- print coordinate system & depth graph with gaschanges --- |
| 714 wintemp.left = 330; | |
| 715 wintemp.top = 160; | |
| 716 wintemp.bottom -= 40; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
717 |
| 38 | 718 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); |
| 719 } | |
| 720 | |
| 721 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
722 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 723 { |
| 724 //*** Page2: Depth and Temperature **** | |
| 725 | |
| 726 SWindowGimpStyle wintemp; | |
| 727 SWindowGimpStyle winsmal; | |
| 728 wintemp.left = 50; | |
| 729 wintemp.right = 799 - wintemp.left; | |
| 730 wintemp.top = 50; | |
| 731 wintemp.bottom = 479 - 40; | |
| 732 | |
| 733 SLogbookHeader logbookHeader; | |
| 734 | |
| 735 logbook_getHeader(StepBackwards,&logbookHeader); | |
| 736 uint16_t dataLength = 0; | |
| 737 uint16_t depthdata[1000]; | |
| 738 uint8_t gasdata[1000]; | |
| 739 int16_t tempdata[1000]; | |
| 740 uint16_t decoDepthdata[1000]; | |
| 741 uint16_t *pDecoDepthData = 0; | |
| 742 | |
| 610 | 743 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, decoDepthdata, NULL, NULL); |
| 38 | 744 |
| 745 for(int i = 0; i<dataLength; i++) | |
| 746 { | |
| 747 if(decoDepthdata[i] >= 300) | |
| 748 { | |
| 749 pDecoDepthData = decoDepthdata; | |
| 750 break; | |
| 751 } | |
| 752 } | |
| 753 //--- print coordinate system & depth graph --- | |
| 754 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, pDecoDepthData); | |
| 755 | |
| 756 //*** Temperature ************************************************* | |
| 757 | |
| 758 //--- print temperature labels --- | |
| 759 // input maxtmpline, tmpstep, deltaline | |
| 760 | |
| 761 winsmal.left = wintemp.right +6; | |
| 762 winsmal.top = wintemp.top - 3; | |
| 763 winsmal.right = wintemp.right + 30; | |
| 764 winsmal.bottom = winsmal.top + 16; | |
| 765 | |
| 567 | 766 if(settingsGetPointer()->nonMetricalSystem) |
| 767 { | |
| 768 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[F]"); | |
| 769 } | |
| 770 else | |
| 771 { | |
| 772 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[C]"); | |
| 773 } | |
| 38 | 774 |
| 775 int16_t minVal = 0; | |
| 776 int16_t maxVal = 0; | |
| 777 int newTop = 0; | |
| 778 int newBottom = 0; | |
| 779 uint16_t step = 0; | |
| 780 int16_t maxValTop = 0; | |
| 653 | 781 int16_t tmp = 0; |
| 38 | 782 |
| 783 scaleHelper(dataLength, tempdata, wintemp.top, wintemp.bottom, | |
| 784 &minVal, &maxVal, &newTop, &newBottom, | |
| 785 &step, &maxValTop); // newTop is wintemp.top | |
| 786 | |
| 787 scaleAdapt( wintemp.top, wintemp.bottom, | |
| 788 &minVal, &maxVal, &newTop, &newBottom, | |
| 789 &step, &maxValTop); | |
| 790 | |
| 791 // temperature in 1/10 �C | |
| 792 int deltaline = (1 + wintemp.bottom - wintemp.top)/5; | |
| 632 | 793 char msg[15]; |
| 653 | 794 |
| 795 /* temperature is provided in centi scaling => convert */ | |
| 796 maxValTop /= 10; | |
| 797 step /= 10; | |
| 798 | |
| 799 tmp = maxValTop; | |
| 38 | 800 for(int i = 1; i<=5; i++) |
| 801 { | |
| 802 tmp -= step; | |
| 803 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 804 winsmal.bottom = winsmal.top + 16; | |
| 653 | 805 snprintf(msg,15,"%2i",unit_temperature_integer(tmp)); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
806 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,msg); |
| 38 | 807 } |
| 808 | |
| 809 | |
| 810 //--- print temperature graph --- | |
| 811 // input tempdata[i], maxtmpline, mintmpline, maxTmp, minTmp, deltaline, wintemp.top, dataLength, datamax, | |
| 812 | |
| 813 //adapt window | |
| 814 wintemp.bottom = newBottom; | |
| 815 wintemp.top = newTop; | |
| 816 GFX_graph_print(hgfx,&wintemp,0,1,maxVal,minVal, (uint16_t *)tempdata,dataLength,CLUT_LogbookTemperature, NULL); | |
| 817 } | |
| 818 | |
| 819 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
820 static void build_logbook_test(uint8_t page, uint8_t StepBackwards) |
| 38 | 821 { |
| 822 uint32_t lastScreen,lastBackground; | |
| 823 | |
| 824 lastScreen = tLOGscreen.FBStartAdress; | |
| 825 lastBackground = tLOGbackground.FBStartAdress; | |
| 826 | |
| 827 tLOGscreen.FBStartAdress = getFrame(16); | |
| 828 tLOGscreen.ImageHeight = 480; | |
| 829 tLOGscreen.ImageWidth = 800; | |
| 830 tLOGscreen.LayerIndex = 1; | |
| 831 | |
| 832 tLOGbackground.FBStartAdress = getFrame(17); | |
| 833 tLOGbackground.ImageHeight = 480; | |
| 834 tLOGbackground.ImageWidth = 800; | |
| 835 tLOGbackground.LayerIndex = 0; | |
| 836 switch(page) | |
| 837 { | |
| 838 case 1: | |
| 839 show_logbook_logbook_show_log_page1(&tLOGscreen,StepBackwards); | |
| 840 break; | |
| 841 case 2: | |
| 842 show_logbook_logbook_show_log_page2(&tLOGscreen,StepBackwards); | |
| 843 break; | |
| 844 case 3: | |
| 845 show_logbook_logbook_show_log_page3(&tLOGscreen,StepBackwards); | |
| 846 break; | |
| 847 case 4: | |
| 848 show_logbook_logbook_show_log_page4(&tLOGscreen,StepBackwards); | |
| 849 break; | |
| 850 } | |
| 851 | |
| 852 releaseFrame(16,lastScreen); | |
| 853 releaseFrame(17,lastBackground); | |
| 854 } | |
| 855 | |
| 856 | |
| 857 void show_logbook_test(_Bool firstPage, uint8_t StepBackwards) | |
| 858 { | |
| 859 if(firstPage) | |
| 860 { | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
861 active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
862 active_log_offset = StepBackwards; |
| 38 | 863 } |
| 864 else | |
| 865 { | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
866 active_log_page++; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
867 if(active_log_page > 4) |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
868 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
869 active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
870 } |
| 38 | 871 } |
| 872 | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
873 build_logbook_test(active_log_page,StepBackwards); |
| 38 | 874 // GFX_ResetLayer(TOP_LAYER); |
| 875 // GFX_ResetLayer(BACKGRD_LAYER); | |
| 876 | |
| 877 set_globalState(StILOGSHOW); | |
| 878 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); | |
| 879 } | |
| 880 | |
| 881 | |
| 882 void show_logbook_exit(void) | |
| 883 { | |
| 884 releaseFrame(16,tLOGscreen.FBStartAdress); | |
| 885 releaseFrame(17,tLOGbackground.FBStartAdress); | |
| 886 } | |
| 887 | |
| 888 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
889 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 890 { |
| 891 SWindowGimpStyle wintemp; | |
| 892 SWindowGimpStyle winsmal; | |
| 662 | 893 uint8_t gasWasUsed[NUM_GASES * 2]; |
| 894 int16_t index = 0; | |
| 895 uint8_t loopMode = 0; | |
| 896 | |
| 38 | 897 wintemp.left = 50; |
| 898 wintemp.right = 799 - wintemp.left; | |
| 899 wintemp.top = 50; | |
| 900 wintemp.bottom = 479 - 40; | |
| 901 | |
| 902 SLogbookHeader logbookHeader; | |
| 903 | |
| 904 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 905 uint16_t dataLength = 0; | |
| 906 uint16_t depthdata[1000]; | |
| 907 uint8_t gasdata[1000]; | |
| 610 | 908 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 909 |
| 662 | 910 char msg[15]; |
| 911 char gas_name[15]; | |
| 912 int j = 0; | |
| 913 | |
| 914 loopMode = isLoopMode(logbookHeader.diveMode); | |
| 915 | |
| 916 /* check if gas was used, independent from its active state */ | |
| 917 for(index = 0; index < NUM_GASES * 2; index++) | |
| 918 { | |
| 919 gasWasUsed[index] = 0; | |
| 920 } | |
| 921 for(index = 0; index < dataLength; index++) | |
| 922 { | |
| 923 if(loopMode) | |
| 924 { | |
| 925 if(gasdata[index] < NUM_GASES) /* the log entry starts with a ID in range 1..4 independend if diluent is used at start */ | |
| 926 { | |
| 927 gasdata[index] += NUM_GASES; | |
| 928 } | |
| 929 else | |
| 930 { | |
| 931 loopMode = 0; /* after the first gas change, no matter if diluent or bailout, the correct ID will be stored */ | |
| 932 } | |
| 933 } | |
| 934 if(gasdata[index] > 0) | |
| 935 { | |
| 936 gasWasUsed[gasdata[index]-1] = 1; /* The ID stored in the samples is starting with 1 (array[0] = gasID1) */ | |
| 937 } | |
| 938 else | |
| 939 { | |
| 940 gasWasUsed[0] = 1; | |
| 941 } | |
| 942 } | |
| 943 | |
| 38 | 944 //--- print coordinate system & depth graph with gaschanges --- |
| 945 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); | |
| 946 | |
| 947 //--- print gas list --- | |
| 948 winsmal.left = wintemp.right - 190; | |
| 949 winsmal.right = winsmal.left + 150; | |
| 950 | |
| 662 | 951 loopMode = isLoopMode(logbookHeader.diveMode); |
| 952 for(index = (2 * NUM_GASES) -1; index >= 0; index--) | |
| 38 | 953 { |
| 662 | 954 if(gasWasUsed[index]) |
| 38 | 955 { |
| 956 j++; | |
| 662 | 957 if(j > 5) /* limit number of gases displayed to 5 */ |
| 958 { | |
| 959 break; | |
| 960 } | |
| 38 | 961 winsmal.top = wintemp.bottom - 5 - j * 26 ; |
| 962 winsmal.bottom = winsmal.top + 21 ; | |
| 662 | 963 uint8_t color = get_colour(index); |
| 38 | 964 |
| 662 | 965 if(loopMode) |
| 966 { | |
| 967 if(index < NUM_GASES) /* Switch to Bailout is not covered by log gas list */ | |
| 968 { | |
| 969 snprintf(gas_name,15,"Bailout"); | |
| 970 snprintf(msg,15,"G%d: %s",index +1, gas_name); | |
| 971 } | |
| 972 else | |
| 973 { | |
| 974 print_gas_name(gas_name,15,logbookHeader.gasordil[index-NUM_GASES].oxygen_percentage,logbookHeader.gasordil[index-NUM_GASES].helium_percentage); | |
| 975 snprintf(msg,15,"D%d: %s",index +1 - NUM_GASES, gas_name); | |
| 976 } | |
| 977 } | |
| 978 else | |
| 979 { | |
| 980 print_gas_name(gas_name,15,logbookHeader.gasordil[index].oxygen_percentage,logbookHeader.gasordil[index].helium_percentage); | |
| 981 snprintf(msg,15,"G%d: %s",index +1, gas_name); | |
| 982 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
983 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 984 } |
| 985 } | |
| 986 | |
| 987 //--- define buttons --- | |
| 988 /*if(*ghost_char_logfile_oxydata) | |
| 989 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page4, surf1_menu_logbook_show_log_next); | |
| 990 else | |
| 991 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 992 */ | |
| 993 } | |
| 994 | |
| 662 | 995 static uint8_t check_data_array_empty(uint16_t* pdata) |
| 996 { | |
| 997 uint8_t ret = 0; | |
| 998 uint8_t index = 0; | |
| 999 uint8_t emptyCnt = 0; | |
| 1000 | |
| 1001 for (index=0; index < 10; index++) /* read the first 10 data points. If all are 0 then the array is rated as empty */ | |
| 1002 { | |
| 1003 if(*(pdata+index) == 0) | |
| 1004 { | |
| 1005 emptyCnt++; | |
| 1006 } | |
| 1007 } | |
| 1008 if(emptyCnt == 10) | |
| 1009 { | |
| 1010 ret = 1; | |
| 1011 } | |
| 1012 return ret; | |
| 1013 } | |
| 1014 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1015 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 1016 { SWindowGimpStyle wintemp; |
| 1017 SWindowGimpStyle winsmal; | |
| 1018 wintemp.left = 50; | |
| 1019 wintemp.right = 799 - wintemp.left; | |
| 1020 wintemp.top = 50; | |
| 1021 wintemp.bottom = 479 - 40; | |
| 1022 uint8_t color = 0; | |
| 1023 SLogbookHeader logbookHeader; | |
| 1024 | |
| 1025 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 1026 uint16_t dataLength = 0; | |
| 1027 uint16_t depthdata[1000]; | |
| 1028 uint8_t gasdata[1000]; | |
| 1029 uint16_t ppO2data[1000]; | |
| 1030 uint16_t sensor2[1000]; | |
| 1031 uint16_t sensor3[1000]; | |
| 662 | 1032 uint16_t *setpoint = ppO2data; |
| 1033 uint16_t *sensor1 = ppO2data; | |
| 1034 uint8_t sensorDataAvailable[] = {0,0,0}; | |
| 38 | 1035 |
| 1036 | |
| 662 | 1037 if(!isLoopMode(logbookHeader.diveMode)) |
| 610 | 1038 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, ppO2data, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 1039 else |
| 1040 { | |
| 662 | 1041 switch(logbookHeader.CCRmode) |
| 1042 { | |
| 1043 case CCRMODE_FixedSetpoint: | |
| 1044 default: dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, setpoint, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 1045 break; | |
| 1046 case CCRMODE_Sensors: dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, NULL, sensor1, sensor2, sensor3, NULL, NULL, NULL, NULL, NULL); | |
| 1047 if(!check_data_array_empty(sensor1)) | |
| 1048 { | |
| 1049 sensorDataAvailable[0] = 1; | |
| 1050 } | |
| 1051 if(!check_data_array_empty(sensor2)) | |
| 1052 { | |
| 1053 sensorDataAvailable[1] = 1; | |
| 1054 } | |
| 1055 if(!check_data_array_empty(sensor3)) | |
| 1056 { | |
| 1057 sensorDataAvailable[2] = 1; | |
| 1058 } | |
| 1059 if((logbookHeader.diveMode == DIVEMODE_PSCR) && (sensorDataAvailable[0] + sensorDataAvailable[1] + sensorDataAvailable[2] != 3)) /*insert sim data if not all three sensors are in use*/ | |
| 1060 { | |
| 1061 if(sensorDataAvailable[0] == 0) | |
| 1062 { | |
| 1063 logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, sensor1, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 1064 sensorDataAvailable[0] = 1; | |
| 1065 } | |
| 1066 else if(sensorDataAvailable[1] == 0) | |
| 1067 { | |
| 1068 logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, sensor2, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 1069 sensorDataAvailable[1] = 1; | |
| 1070 } | |
| 1071 else if(sensorDataAvailable[2] == 0) | |
| 1072 { | |
| 1073 logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, sensor3, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 1074 sensorDataAvailable[2] = 1; | |
| 1075 } | |
| 1076 } | |
| 1077 break; | |
| 1078 case CCRMODE_Simulation: dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, ppO2data, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 1079 break; | |
| 1080 } | |
| 38 | 1081 } |
| 1082 | |
| 1083 | |
| 1084 //--- print coordinate system & depth graph with bailout--- | |
| 1085 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, NULL); | |
| 1086 | |
| 1087 | |
| 1088 | |
| 1089 //*** Desciption at bottom of page *************************** | |
| 1090 winsmal.top = wintemp.bottom +2 ; | |
| 1091 winsmal.bottom = winsmal.top + 16; | |
| 1092 | |
| 1093 | |
| 1094 /*if(strcmp( (char*)ghost_char_logfile_text_oc_ccr,"ccr/bailout") == 0) | |
| 1095 { | |
| 1096 winsmal.left = wintemp.left + 2; | |
| 1097 winsmal.right = winsmal.left + 55; | |
| 1098 | |
| 1099 oled_write(OVERLAY, &winsmal,"CCR -",false,true); | |
| 1100 | |
| 1101 winsmal.left = winsmal.right; | |
| 1102 winsmal.right = winsmal.left + 90; | |
| 1103 //winsmal.fontcolor = oled_get_colour(15); | |
| 1104 oled_write(OVERLAY, &winsmal,"bailout",false,true); | |
| 1105 } | |
| 1106 else*/ | |
| 1107 { | |
| 1108 winsmal.left = wintemp.left + 2; | |
| 1109 winsmal.right = winsmal.left + 55; | |
| 1110 color = CLUT_GasSensor1;//LOGBOOK_GRAPH_DEPTH; | |
| 1111 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1112 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"depth"); |
| 38 | 1113 |
| 1114 } | |
| 1115 winsmal.left = 799 - 67;//wintemp.right -67; | |
| 1116 winsmal.right = winsmal.left;// + 45; | |
| 1117 | |
| 662 | 1118 color = CLUT_LogbookTemperature; |
| 1119 | |
| 1120 if(!isLoopMode(logbookHeader.diveMode)) | |
| 1121 { | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1122 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002PP O2"); |
| 662 | 1123 } |
| 38 | 1124 else |
| 662 | 1125 { |
| 1126 switch(logbookHeader.CCRmode) | |
| 1127 { | |
| 1128 case CCRMODE_FixedSetpoint: | |
| 1129 default: Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SETPOINT"); | |
| 1130 break; | |
| 1131 case CCRMODE_Sensors: Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SENSORS"); | |
| 1132 break; | |
| 1133 case CCRMODE_Simulation: Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SIM PPO2"); | |
| 1134 break; | |
| 1135 } | |
| 1136 } | |
| 38 | 1137 |
| 1138 //*** PP O2 **************************************************** | |
| 1139 //calc lines and labels | |
| 1140 int datamax = 0; | |
| 1141 int datamin = 10000; | |
| 1142 for(int i=1;i<dataLength;i++) | |
| 1143 { | |
| 1144 if(ppO2data[i]>datamax) | |
| 1145 datamax = ppO2data[i]; | |
| 1146 if(ppO2data[i]<datamin) | |
| 1147 datamin = ppO2data[i]; | |
| 1148 } | |
| 662 | 1149 if(isLoopMode(logbookHeader.diveMode) && (logbookHeader.CCRmode == CCRMODE_Sensors)) |
| 38 | 1150 { |
| 1151 for(int i=1;i<dataLength;i++) | |
| 1152 { | |
| 1153 if(sensor2[i]>datamax) | |
| 1154 datamax = sensor2[i]; | |
| 1155 if(sensor2[i]<datamin) | |
| 1156 datamin = sensor2[i]; | |
| 1157 if(sensor3[i]>datamax) | |
| 1158 datamax = sensor3[i]; | |
| 1159 if(sensor3[i]<datamin) | |
| 1160 datamin = sensor3[i]; | |
| 1161 } | |
| 1162 } | |
| 1163 float maxoxy = ((float)datamax)/100; | |
| 1164 float minoxy = ((float)datamin)/100; | |
| 1165 float oxystep = 0.5; | |
| 1166 float maxoxyline = 2.5; | |
| 1167 | |
| 1168 //--- print PP O2 labels ---- | |
| 1169 winsmal.left = wintemp.right + 2; | |
| 1170 winsmal.top = wintemp.top ; | |
| 1171 winsmal.right = wintemp.right + 30; | |
| 1172 winsmal.bottom = winsmal.top + 16; | |
| 1173 //winsmal.font = ft_tiny + ft_SLIM; | |
| 1174 color = CLUT_LogbookTemperature;// = LOGBOOK_GRAPH_TEMP; | |
| 1175 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1176 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"bar"); |
| 38 | 1177 |
| 1178 int deltaline = (wintemp.bottom - wintemp.top)/5; | |
| 1179 char msg[4]; | |
| 1180 float oxy = maxoxyline; | |
| 1181 for(int i = 1; i<=5; i++) | |
| 1182 { | |
| 1183 oxy -= oxystep; | |
| 1184 if(oxy < 0) | |
| 1185 break; | |
| 1186 winsmal.top = wintemp.top + deltaline * i - 8; | |
| 1187 winsmal.bottom = winsmal.top + 16; | |
| 1188 snprintf(msg,4,"%1.1f",oxy); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1189 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 1190 //oled_write(OVERLAY, &winsmal,msg,false,true); |
| 1191 } | |
| 1192 | |
| 1193 //--- print PP O2 graph --- | |
| 1194 //Adapt window | |
| 1195 float ftmp = ((maxoxyline - minoxy) * deltaline) /oxystep + wintemp.top; | |
| 1196 wintemp.bottom = ftmp; | |
| 1197 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1198 wintemp.bottom++; | |
| 1199 | |
| 1200 ftmp = wintemp.top + ((maxoxyline - maxoxy) * deltaline) /oxystep; | |
| 1201 wintemp.top = ftmp; | |
| 1202 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1203 wintemp.top++; | |
| 1204 wintemp.top = MaxU32LOG(wintemp.top ,0); | |
| 1205 if(wintemp.top < wintemp.bottom) | |
| 1206 { | |
| 662 | 1207 if(isLoopMode(logbookHeader.diveMode) && (logbookHeader.CCRmode == CCRMODE_Sensors)) |
| 38 | 1208 { |
| 662 | 1209 if(sensorDataAvailable[0]) |
| 1210 { | |
| 1211 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_GasSensor2, NULL); | |
| 1212 } | |
| 1213 if(sensorDataAvailable[1]) | |
| 1214 { | |
| 1215 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor2,dataLength,CLUT_GasSensor3, NULL); | |
| 1216 } | |
| 1217 if(sensorDataAvailable[2]) | |
| 1218 { | |
| 1219 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor3,dataLength,CLUT_GasSensor4, NULL); | |
| 1220 } | |
| 38 | 1221 } |
| 1222 else | |
| 1223 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1224 } | |
| 1225 else | |
| 1226 { | |
| 1227 point_t startPoint, stopPoint; | |
| 1228 startPoint.x = wintemp.left; | |
| 1229 stopPoint.x = wintemp.right; | |
| 1230 stopPoint.y = startPoint.y = 479 - wintemp.top; | |
| 1231 GFX_draw_colorline(hgfx, startPoint, stopPoint, CLUT_LogbookTemperature); | |
| 1232 } | |
| 1233 | |
| 1234 //--- define buttons --- | |
| 1235 //button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 1236 } | |
| 1237 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1238 static void print_gas_name(char* output,uint8_t length,uint8_t oxygen,uint8_t helium) |
| 38 | 1239 { |
| 1240 if(helium == 0) | |
| 1241 { | |
| 1242 if(oxygen == 21) | |
| 1243 snprintf(output, length, "Air"); | |
| 1244 else if(oxygen == 100) | |
| 1245 snprintf(output, length, "Oxy"); | |
| 1246 else | |
| 1247 snprintf(output, length, "NX%i",oxygen); | |
| 1248 } | |
| 1249 else | |
| 1250 { | |
| 1251 if((oxygen + helium) == 100) | |
| 1252 snprintf(output, length, "HX%i",oxygen); | |
| 1253 else | |
| 1254 snprintf(output, length, "TMX%i/%i", oxygen, helium); | |
| 1255 } | |
| 1256 | |
| 1257 } | |
| 1258 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1259 static int16_t get_colour(int16_t color) |
| 38 | 1260 { |
| 1261 return CLUT_GasSensor1 + color; | |
| 1262 } | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1263 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1264 uint8_t getActiveLogPage() |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1265 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1266 return active_log_page; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1267 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1268 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1269 void updateReplayIncdicator(GFX_DrawCfgScreen *hgfx) |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1270 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1271 build_logbook_test(1,active_log_offset); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1272 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1273 } |