Mercurial > public > ostc4
annotate Discovery/Inc/tStructure.h @ 923:6fc0e3d230e4 Evo_2_23 tip
UART6 DMA handling:
Make sure that RX transmission uses DMA stream 2
| author | Ideenmodellierer |
|---|---|
| date | Mon, 04 Nov 2024 20:21:02 +0100 |
| parents | d4622533271d |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Inc/tStructure.h | |
| 5 /// \brief Header file for All | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 04-July-2014 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 /* Define to prevent recursive inclusion -------------------------------------*/ | |
| 28 #ifndef TSTRUCTURE_H | |
| 29 #define TSTRUCTURE_H | |
| 30 | |
| 31 #ifdef __cplusplus | |
| 32 extern "C" { | |
| 33 #endif | |
| 34 | |
| 35 /* Includes ------------------------------------------------------------------*/ | |
| 36 #include "stdint.h" | |
| 37 | |
| 38 /** @addtogroup Template | |
| 39 * @{ | |
| 40 */ | |
| 41 | |
| 42 | |
| 43 #ifdef __cplusplus | |
| 44 } | |
| 45 #endif | |
| 46 | |
| 47 #define _MB(base,menuPage,menuLine,menuEditField,menuEditWhichMode) ((base << 28) + (menuPage << 24) + (menuLine << 16) + (menuEditField << 8) + menuEditWhichMode) | |
| 48 | |
| 49 #define BaseInfo 0 | |
| 50 #define BaseHome 1 | |
| 51 #define BaseMenu 2 | |
| 52 #define BaseComm 3 | |
| 53 #define BaseStop 6 | |
| 54 #define BaseBoot 7 | |
| 55 | |
| 56 #define PageDebug 0 | |
| 57 #define PageSurface 1 | |
| 58 #define PageDive 2 | |
| 59 | |
| 60 #define MaskLineFieldDigit _MB(7,15,0,0,0) | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
61 #define MaskFieldDigit _MB(7,15,255,0,0) |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
62 #define MaskAllButLine _MB(0,0,255,0,0) |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
63 #define MaskLineDigit _MB(7,15,0,255,0) |
| 38 | 64 #define InfoPageLogList 2 |
| 65 #define InfoPageLogShow 3 | |
| 66 #define InfoPageCompass 6 | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
67 #define InfoPageSensor 8 |
| 845 | 68 #define InfoPagePreDive 9 |
| 38 | 69 |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
70 #define StI _MB(0,1,0,0,0) |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
71 #define StILOGLIST _MB(0,2,0,0,0) |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
72 #define StILOGSHOW _MB(0,3,0,0,0) |
| 38 | 73 #define StIDIVE _MB(0,4,0,0,0) |
| 74 #define StISIM _MB(0,5,0,0,0) | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
75 #define StICOMPASS _MB(0,6,0,0,0) |
| 38 | 76 #define StIDEBUG _MB(0,7,0,0,0) |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
77 #define StISENINFO _MB(0,8,0,0,0) |
| 845 | 78 #define StIPREDIVE _MB(0,9,0,0,0) |
| 38 | 79 |
| 80 #define StI_GoToLogbook _MB(0,1,1,0,0) | |
| 81 #define StI_GoToPlanner _MB(0,1,2,0,0) | |
| 82 #define StI_StartSimulator _MB(0,1,3,0,0) | |
| 83 | |
| 84 #define StISIM_Descend _MB(0,5,1,0,0) | |
| 85 #define StISIM_Ascend _MB(0,5,2,0,0) | |
| 86 #define StISIM_Divetime _MB(0,5,3,0,0) | |
| 87 #define StISIM_Exit _MB(0,5,4,0,0) | |
| 88 #define StISIM_FollowDeco _MB(0,5,5,0,0) | |
| 89 | |
| 90 | |
| 91 #define StDEBUG _MB(1,0,0,0,0) | |
| 92 #define StS _MB(1,1,0,0,0) | |
| 93 #define StD _MB(1,2,0,0,0) | |
| 94 #define StDMGAS _MB(1,2,1,0,0) | |
| 95 #define StDMSPT _MB(1,2,2,0,0) | |
| 96 #define StDMENU _MB(1,2,3,0,0) | |
| 97 #define StDSIM1 _MB(1,2,4,0,0) | |
| 98 #define StDSIM2 _MB(1,2,5,0,0) | |
| 99 #define StDSIM3 _MB(1,2,6,0,0) | |
| 100 #define StDSIM4 _MB(1,2,7,0,0) | |
| 101 #define StDBEAR _MB(1,2,8,0,0) | |
| 102 #define StDRAVG _MB(1,2,9,0,0) | |
| 103 #define StDQUIT _MB(1,2,10,0,0) | |
| 614 | 104 #define StDMARK _MB(1,2,11,0,0) |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
614
diff
changeset
|
105 #define StDCHECK _MB(1,2,12,0,0) |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
626
diff
changeset
|
106 #define StDSIM5 _MB(1,2,13,0,0) |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
626
diff
changeset
|
107 #define StDSIM6 _MB(1,2,14,0,0) |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
740
diff
changeset
|
108 #define StDBAILOUT _MB(1,2,15,0,0) |
|
775
46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
heinrichsweikamp
parents:
774
diff
changeset
|
109 #define StDSETPOINT _MB(1,2,16,0,0) |
| 38 | 110 |
| 111 #define StUART_STANDARD _MB(3,1,0,0,0) | |
| 112 #define StUART_RTECONNECT _MB(3,2,0,0,0) | |
| 113 | |
| 114 #define StStop _MB(6,0,0,0,0) | |
| 115 #define StBoot0 _MB(7,0,0,0,0) | |
| 116 | |
| 117 /* globalState defines in which visible range the cursor can move */ | |
| 118 /* position of the cursor does not affect globalState */ | |
| 119 /* next page is a different globalState */ | |
| 120 /* next line, field or digit is not a different state */ | |
| 121 /* digit is empty at the moment and be reused for future features */ | |
| 122 | |
| 123 /* PAGE 1 */ | |
| 124 #define StMOG _MB(2,1,0,0,0) | |
| 125 | |
| 126 /* PAGE 1 MENU EDIT */ | |
| 127 | |
| 128 /* PAGE 1 EDIT FIELD CONTENT */ | |
| 129 /* used for PAGE 2 AS WELL */ | |
| 130 #define StMOG_Mix _MB(2,1,255,1,0) | |
| 131 #define StMOG_GasType _MB(2,1,255,2,0) | |
| 132 #define StMOG_ChangeDepth _MB(2,1,255,3,0) | |
| 133 #define StMOG_SetToMOD _MB(2,1,255,4,0) | |
|
832
7b0033246b12
Added selection if an active gas shall be used for deco calculation or not
Ideenmodellierer
parents:
815
diff
changeset
|
134 #define StMOG_CalcDeco _MB(2,1,255,5,0) |
|
7b0033246b12
Added selection if an active gas shall be used for deco calculation or not
Ideenmodellierer
parents:
815
diff
changeset
|
135 /* #define StMOG_Bottle _MB(2,1,255,5,0) */ |
| 38 | 136 |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
521
diff
changeset
|
137 #define StMOG_MOD _MB(2,1,255,9,0) |
| 38 | 138 |
| 139 #define StMOG_First _MB(2,1,255,21,0) | |
| 140 #define StMOG_Deco _MB(2,1,255,22,0) | |
| 141 #define StMOG_Travel _MB(2,1,255,23,0) | |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
521
diff
changeset
|
142 #define StMOG_Inactive _MB(2,1,255,24,0) |
|
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
521
diff
changeset
|
143 #define StMOG_Off _MB(2,1,255,25,0) |
| 38 | 144 |
| 145 #define StMOG_NoTransmitter _MB(2,1,255,30,0) | |
| 146 #define StMOG_Transmitter1 _MB(2,1,255,31,0) | |
| 147 #define StMOG_Transmitter2 _MB(2,1,255,32,0) | |
| 148 #define StMOG_Transmitter3 _MB(2,1,255,33,0) | |
| 149 #define StMOG_Transmitter4 _MB(2,1,255,34,0) | |
| 150 #define StMOG_Transmitter5 _MB(2,1,255,35,0) | |
| 151 //#define StMOG_Transmitter6 _MB(2,1,255,36,0) | |
| 152 //#define StMOG_Transmitter7 _MB(2,1,255,37,0) | |
| 153 //#define StMOG_Transmitter8 _MB(2,1,255,38,0) | |
| 154 //#define StMOG_Transmitter9 _MB(2,1,255,39,0) | |
| 155 | |
| 156 #define StMOG_DM_ActiveBase _MB(2,1,6,255,0) | |
| 157 #define StMOG_DM_ExtraMix _MB(2,1,6,6,0) | |
| 158 /* | |
| 159 #define StMOG_DM_Active1 _MB(2,1,6,255,1) | |
| 160 #define StMOG_DM_Active2 _MB(2,1,6,255,2) | |
| 161 #define StMOG_DM_Active3 _MB(2,1,6,255,3) | |
| 162 #define StMOG_DM_Active4 _MB(2,1,6,255,4) | |
| 163 #define StMOG_DM_Active5 _MB(2,1,6,255,5) | |
| 164 #define StMOG_DM_Active6 _MB(2,1,6,255,6) | |
| 165 #define StMOG_DM_Active7 _MB(2,1,6,255,7) | |
| 166 #define StMOG_DM_Active8 _MB(2,1,6,1,8) | |
| 167 #define StMOG_DM_Active9 _MB(2,1,6,1,9) | |
| 168 #define StMOG_DM_Active10 _MB(2,1,6,1,10) | |
| 169 */ | |
| 170 | |
| 171 /* | |
| 172 #define StMOG_Depth _MB(2,1,255, 2,0) | |
| 173 #define StMOG_DefaultDepth _MB(2,1,255, 4,0) | |
| 174 #define StMOG_Reset _MB(2,1,255, 5,0) | |
| 175 #define StMOG_ToggleDefault _MB(2,1,255, 6,0) | |
| 176 #define StMOG_SensorLink _MB(2,1,255, 9,0) | |
| 177 #define StMOG_Size _MB(2,1,255,10,0) | |
| 178 */ | |
| 179 | |
| 180 /* PAGE 2 */ | |
| 181 #define StMCG _MB(2,2,0,0,0) | |
| 182 /* PAGE 3 */ | |
| 183 #define StMSP _MB(2,3,0,0,0) | |
| 184 | |
| 185 /* PAGE 3 EDIT FIELD CONTENT */ | |
|
811
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
186 #define StMSP_SPLow _MB(2,3,1,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
187 #define StMSP_SPHigh _MB(2,3,2,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
188 #define StMSP_SPDeco _MB(2,3,3,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
189 #define StMSP_Blank _MB(2,3,4,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
190 #define StMSP_DelayDeco _MB(2,3,5,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
191 #define StMSP_Auto _MB(2,3,6,0,0) |
|
4c41d9a18c7f
Added function to skip lines which are not needed for operation:
Ideenmodellierer
parents:
805
diff
changeset
|
192 |
| 38 | 193 #define StMSP_ppo2_setting _MB(2,3,255,1,0) |
| 194 #define StMSP_Active _MB(2,3,255,3,0) | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
195 |
| 38 | 196 #define StMSP_Sensor1 _MB(2,3,255,6,0) |
| 197 #define StMSP_Sensor2 _MB(2,3,255,7,0) | |
| 198 #define StMSP_Sensor3 _MB(2,3,255,8,0) | |
| 199 | |
| 200 /* PAGE 4 */ | |
| 201 #define StMXTRA _MB(2,4,0,0,0) | |
| 202 | |
| 203 /* PAGE 4 MENU EDIT */ | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
633
diff
changeset
|
204 /* DIVE MODE */ |
| 38 | 205 #define StMXTRA_ResetStopwatch _MB(2,4,1,1,0) |
| 206 #define StMXTRA_CompassHeading _MB(2,4,2,1,0) | |
|
774
6169309d6eb9
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
heinrichsweikamp
parents:
773
diff
changeset
|
207 #define StMXTRA_CompassHeadingClear _MB(2,4,2,2,0) |
|
6169309d6eb9
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
heinrichsweikamp
parents:
773
diff
changeset
|
208 #define StMXTRA_CompassHeadingReset _MB(2,4,2,3,0) |
| 38 | 209 |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
633
diff
changeset
|
210 /* SURFACE MODE */ |
|
707
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
211 |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
212 #define StMXTRA_CCRmode _MB(2,4,1,1,0) |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
213 #define StMXTRA_O2_Fallback _MB(2,4,2,1,0) |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
214 #define StMXTRA_ScrubTimer _MB(2,4,3,1,0) |
| 710 | 215 #define StMXTRA_ScrubTimer_Max _MB(2,4,3,2,0) |
| 216 #define StMXTRA_ScrubTimer_Reset _MB(2,4,3,3,0) | |
| 217 #define StMXTRA_ScrubTimer_OP_Mode _MB(2,4,3,5,0) | |
| 662 | 218 #define StMXTRA_PSCR_O2_Drop _MB(2,4,4,1,0) |
|
707
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
219 #define StMXTRA_PSCR_LUNG_RATIO _MB(2,4,4,2,0) |
| 845 | 220 #define StMXTRA_Predive_Check _MB(2,4,5,1,0) |
| 221 | |
|
707
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
222 |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
223 |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
224 |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
633
diff
changeset
|
225 |
| 38 | 226 /* PAGE 5 */ |
| 227 #define StMDECO _MB(2,5,0,0,0) | |
| 228 | |
| 229 /* PAGE 5 MENU EDIT */ | |
| 230 /* | |
| 231 #define StMDECO1 _MB(2,5,1,0,0) | |
| 232 #define StMDECO2 _MB(2,5,2,0,0) | |
| 233 #define StMDECO3 _MB(2,5,3,0,0) | |
| 234 #define StMDECO4 _MB(2,5,4,0,0) | |
| 235 #define StMDECO5 _MB(2,5,5,0,0) | |
| 236 #define StMDECO6 _MB(2,5,6,0,0) | |
| 237 */ | |
| 238 | |
| 239 /* PAGE 5 EDIT FIELD CONTENT */ | |
| 240 #define StMDECO1_OC _MB(2,5,1,1,0) | |
| 241 #define StMDECO1_CC _MB(2,5,1,2,0) | |
| 662 | 242 #define StMDECO1_Apnea _MB(2,5,1,3,0) |
| 243 #define StMDECO1_Gauge _MB(2,5,1,4,0) | |
| 244 #define StMDECO1_PSCR _MB(2,5,1,5,0) | |
| 38 | 245 |
|
707
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
246 #define StMDECO3_PPO2Max _MB(2,5,2,1,0) |
|
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
247 #define StMDECO4_SafetyStop _MB(2,5,3,1,0) |
| 882 | 248 #define StMDECO_SlowExit _MB(2,5,4,1,0) |
| 249 #define StMDECO5_FUTURE _MB(2,5,5,1,0) | |
| 250 #define StMDECO6_SALINITY _MB(2,5,6,1,0) | |
| 38 | 251 |
| 252 /* PAGE 6 */ | |
| 253 #define StMDECOP _MB(2,6,0,0,0) | |
| 254 | |
| 255 #define StMDECOP1_Algorithm _MB(2,6,1,1,0) | |
| 902 | 256 #define StMDECOP2_VPM _MB(2,6,2,1,0) |
| 257 #define StMDECOP3_GF _MB(2,6,3,1,0) | |
| 258 #define StMDECOP4_AltGF _MB(2,6,4,1,0) | |
| 38 | 259 #define StMDECOP5_LASTSTOP _MB(2,6,5,1,0) |
| 902 | 260 #define StMDECOP6_VPMTable _MB(2,6,6,1,0) |
| 38 | 261 |
| 262 #define StMDECOP7_ActiveGF _MB(2,6,7,1,0) | |
| 263 #define StMDECOP8_ActiveVPM _MB(2,6,8,1,0) | |
| 264 #define StMDECOP9_ActiveAltGF _MB(2,6,9,1,0) | |
| 265 | |
| 266 /* PAGE 7 */ | |
| 267 #define StMHARD _MB(2,7,0,0,0) | |
| 268 | |
| 269 /* PAGE 7 EDIT FIELD CONTENT */ | |
| 270 | |
| 271 | |
| 272 #define StMHARD1_Bluetooth _MB(2,7,1,1,0) | |
| 273 | |
| 854 | 274 #define StMHARD2_Compass _MB(2,7,2,0,0) |
| 38 | 275 #define StMHARD2_Compass_SetCourse _MB(2,7,2,2,0) |
| 276 #define StMHARD2_Compass_ResetCourse _MB(2,7,2,3,0) | |
| 277 #define StMHARD2_Compass_Calibrate _MB(2,7,2,4,0) | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
531
diff
changeset
|
278 #define StMHARD2_Compass_Inertia _MB(2,7,2,5,0) |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
775
diff
changeset
|
279 #define StMHARD2_Compass_Declination _MB(2,7,2,6,0) |
| 38 | 280 |
| 281 //#define StMHARD2_Exit _MB(2,7,2,2,0) | |
| 282 | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
283 #define StMHARD3_Sensors _MB(2,7,3,0,0) |
| 38 | 284 #define StMHARD3_O2_Sensor1 _MB(2,7,3,1,0) |
| 285 #define StMHARD3_O2_Sensor2 _MB(2,7,3,2,0) | |
| 286 #define StMHARD3_O2_Sensor3 _MB(2,7,3,3,0) | |
|
707
e81afd727993
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
662
diff
changeset
|
287 #define StMHARD3_O2_Calibrate _MB(2,7,3,4,0) |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
288 #define StMHARD3_Sensor_Info _MB(2,7,3,5,0) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
718
diff
changeset
|
289 #define StMHARD3_Sensor_Detect _MB(2,7,3,6,0) |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
710
diff
changeset
|
290 |
| 38 | 291 |
| 292 #define StMHARD4_BrightnessEco _MB(2,7,4,1,0) | |
| 293 #define StMHARD4_BrightnessStd _MB(2,7,4,2,0) | |
| 294 #define StMHARD4_BrightnessHigh _MB(2,7,4,3,0) | |
| 295 #define StMHARD4_BrightnessMax _MB(2,7,4,4,0) | |
| 296 | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
531
diff
changeset
|
297 #define StMHARD5_Button1 _MB(2,7,5,1,0) |
| 38 | 298 #define StMHARD5_ButtonBalance1 _MB(2,7,5,2,0) |
| 299 #define StMHARD5_ButtonBalance2 _MB(2,7,5,3,0) | |
| 300 #define StMHARD5_ButtonBalance3 _MB(2,7,5,4,0) | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
301 #define StMHARD5_ButtonLock _MB(2,7,5,5,0) |
| 38 | 302 |
| 303 //#define StMHARD6_UpdateCPU2_No _MB(2,7,6,1,0) | |
| 304 //#define StMHARD6_UpdateCPU2_Yes _MB(2,7,6,2,0) | |
| 305 //#define StMHARD6_UpdateCPU2_Now _MB(2,7,6,3,0) | |
| 306 | |
| 307 /* PAGE 8 */ | |
| 308 #define StMSYS _MB(2,8,0,0,0) | |
| 309 | |
| 310 /* PAGE 8 EDIT FIELD CONTENT */ | |
| 311 #define StMSYS1_Date _MB(2,8,1,1,0) | |
| 312 #define StMSYS1_Time _MB(2,8,1,2,0) | |
| 313 #define StMSYS1_DDMMYY _MB(2,8,1,3,0) | |
| 314 #define StMSYS1_MMDDYY _MB(2,8,1,4,0) | |
| 315 #define StMSYS1_YYMMDD _MB(2,8,1,5,0) | |
| 316 #define StMSYS1_DST _MB(2,8,1,6,0) | |
| 567 | 317 #define StMSYS1_12HR _MB(2,8,1,7,0) |
| 38 | 318 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
319 #define StMSYS_Timer _MB(2,8,2,1,0) |
| 38 | 320 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
321 #define StMSYS2_English _MB(2,8,3,1,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
322 #define StMSYS2_German _MB(2,8,3,2,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
323 #define StMSYS2_French _MB(2,8,3,3,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
324 #define StMSYS2_Italian _MB(2,8,3,4,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
325 #define StMSYS2_Espanol _MB(2,8,3,5,0) |
| 38 | 326 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
327 #define StMSYS3_Units _MB(2,8,4,1,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
328 #define StMSYS3_Colors _MB(2,8,4,2,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
329 #define StMSYS3_Debug _MB(2,8,4,3,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
330 |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
331 #define StMSYS4_Info _MB(2,8,5,1,0) |
| 38 | 332 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
333 #define StMSYS5_Exit _MB(2,8,6,1,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
334 #define StMSYS5_LogbookOffset _MB(2,8,6,7,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
335 #define StMSYS5_ResetAll _MB(2,8,6,2,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
336 #define StMSYS5_ResetDeco _MB(2,8,6,3,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
337 #define StMSYS5_Reboot _MB(2,8,6,4,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
338 #define StMSYS5_Maintenance _MB(2,8,6,5,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
339 #define StMSYS5_ResetLogbook _MB(2,8,6,6,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
340 #define StMSYS5_SetBattCharge _MB(2,8,6,7,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
341 #define StMSYS5_RebootRTE _MB(2,8,6,8,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
342 #define StMSYS5_RebootMainCPU _MB(2,8,6,9,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
343 #define StMSYS5_ScreenTest _MB(2,8,6,10,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
344 #define StMSYS5_SetFactoryBC _MB(2,8,6,11,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
345 #define StMSYS5_ResetBluetooth _MB(2,8,6,12,0) |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
788
diff
changeset
|
346 #define StMSYS5_SetSampleIndx _MB(2,8,6,13,0) |
| 845 | 347 #define StMSYS5_AdjustSurfPres _MB(2,8,6,14,0) |
| 38 | 348 |
|
815
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
349 #define StMSYS_Custom0 _MB(2,8,1,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
350 #define StMSYS_Custom1 _MB(2,8,2,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
351 #define StMSYS_Custom2 _MB(2,8,3,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
352 #define StMSYS_Custom3 _MB(2,8,4,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
353 #define StMSYS_Custom4 _MB(2,8,5,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
354 #define StMSYS_Custom5 _MB(2,8,6,0,0) |
|
ce8f71217f45
Bugfix CustomView selection during dive mode:
Ideenmodellierer
parents:
811
diff
changeset
|
355 |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
356 /* PAGE 9 */ |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
357 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
358 # define StMCustom _MB(2,9,0,0,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
359 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
360 /* PAGE 9 EDIT FIELD CONTENT */ |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
361 // |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
362 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
363 #define StMCustom1_CViewTimeout _MB(2,9,1,1,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
364 #define StMCustom1_CViewStandard _MB(2,9,1,2,0) |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
365 #define StMCustom1_CViewStandardBF _MB(2,9,1,3,0) |
|
834
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
832
diff
changeset
|
366 #define StMCustom1_CViewAutoFocusBF _MB(2,9,1,4,0) |
|
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
832
diff
changeset
|
367 #define StMCustom1_CornerTimeout _MB(2,9,1,5,0) |
|
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
832
diff
changeset
|
368 #define StMCustom1_CornerStandard _MB(2,9,1,6,0) |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
369 |
|
521
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
370 #define StMCustom2_BFSelection _MB(2,9,2,1,0) |
| 38 | 371 |
|
521
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
372 #define StMCustom3_CViewSelection1 _MB(2,9,3,1,0) |
|
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
373 #define StMCustom3_CViewSelection2 _MB(2,9,3,2,0) |
|
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
374 #define StMCustom3_CViewSelection3 _MB(2,9,3,3,0) |
|
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
375 #define StMCustom3_CViewSelection4 _MB(2,9,3,4,0) |
|
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
376 #define StMCustom3_CViewSelection5 _MB(2,9,3,5,0) |
|
e221cf762f45
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Ideenmodellierer
parents:
506
diff
changeset
|
377 #define StMCustom3_CViewSelection6 _MB(2,9,3,6,0) |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
378 |
| 531 | 379 #define StMCustom4_CViewSelection1 _MB(2,9,4,1,0) |
| 553 | 380 |
|
604
fb5bb04ad914
Merged menu items of viewport and motion control:
Ideenmodellierer
parents:
567
diff
changeset
|
381 #define StMCustom5_CViewPortCalib _MB(2,9,5,1,0) |
|
626
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
619
diff
changeset
|
382 #define StMCustom5_CViewPortSpotSize _MB(2,9,5,2,0) |
|
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
619
diff
changeset
|
383 #define StMCustom5_CViewPortLayout _MB(2,9,5,3,0) |
|
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
619
diff
changeset
|
384 #define StMCustom5_CViewPortAmbient _MB(2,9,5,4,0) |
|
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
619
diff
changeset
|
385 #define StMCustom5_CViewPortControl _MB(2,9,5,5,0) |
|
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
619
diff
changeset
|
386 |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
387 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
388 /* PAGE 10 */ |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
389 #define StMPLAN _MB(2,10,0,0,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
390 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
391 /* PAGE 10 EDIT FIELD CONTENT */ |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
392 #define StMPLAN2_Interval _MB(2,10,2,1,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
393 #define StMPLAN3_DiveTime _MB(2,10,3,1,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
394 #define StMPLAN4_MaxDepth _MB(2,10,4,1,0) |
|
604
fb5bb04ad914
Merged menu items of viewport and motion control:
Ideenmodellierer
parents:
567
diff
changeset
|
395 #define StMPLAN5_ExitResult _MB(2,10,5,1,0) |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
396 #define StMPLAN4_Settings _MB(2,10,6,1,0) |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
397 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
398 |
|
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
399 |
| 38 | 400 |
| 401 | |
| 402 //#define StMDECO6_SALINITY _MB(2,5,6,1,0) | |
| 403 //#define StMDECO6_DefaultSAL _MB(2,5,6,2,0) | |
| 404 | |
| 405 | |
| 406 | |
| 407 | |
|
506
998529b3e142
Added new top level menu for customization of views
Ideenmodellierer
parents:
424
diff
changeset
|
408 //#define StMDECO7_AMV _MB(2,5,7,1,0) |
| 38 | 409 //#define StMDECO7_DefaultAMV _MB(2,5,7,2,0) |
| 410 //#define StMDECO7_RESERVE _MB(2,5,7,3,0) | |
| 411 | |
| 412 | |
| 413 /* | |
| 414 typedef struct | |
| 415 { | |
| 416 uint32_t id; | |
| 417 int8_t implemented; | |
| 418 int8_t enabled; | |
| 419 uint32_t pointer; | |
| 420 uint8_t type; | |
| 421 } SStateOfMachine; | |
| 422 */ | |
| 423 | |
| 424 typedef struct | |
| 425 { | |
| 426 uint8_t base; | |
| 427 uint8_t page; | |
| 428 uint8_t line; | |
| 429 uint8_t field; | |
| 430 uint8_t mode; | |
| 431 } SStateList; | |
| 432 | |
| 433 | |
| 434 | |
| 435 #endif /* TSTRUCTURE_H */ | |
| 436 | |
| 437 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |