Mercurial > public > ostc4
annotate Common/Inc/settings.h @ 827:ffb1036c27c2 Evo_2_23
Moved CO2 Menu from Xtra to Hardware:
The first CO2 sensor menu implementation was placed within the Xtra menu. In the new version the CO2 options may be accessed using the sensor overview menu of the Hardware page. With this change it is no longer necessary to take care for compile switches in the menus because the menu will only be shown if a CO2 sensor is detected.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 05 Nov 2023 20:19:08 +0100 |
| parents | 24b39a432bc2 |
| children | b7d93ff6b3b2 fa431d42b5fb |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/settings.h | |
| 5 /// \brief | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef SETTINGS_H | |
| 28 #define SETTINGS_H | |
| 29 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
30 #include <stdint.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
31 #include <stdbool.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
32 |
| 38 | 33 // From Common/Inc: |
| 34 #include "FirmwareData.h" | |
| 35 | |
| 36 //#include "data_central.h" | |
| 37 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
38 #include "global_constants.h" |
| 38 | 39 // From Common/Drivers/ |
| 40 #include "stm32f4xx_hal.h" | |
| 710 | 41 #include "stm32f4xx_hal_rtc.h" |
| 38 | 42 |
| 691 | 43 #include "configuration.h" |
| 44 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
45 |
| 38 | 46 #define NUM_GASES 5 |
| 47 #define NUM_OFFSET_DILUENT 5 | |
| 48 #define SPECIAL_GAS_ID 0 | |
| 49 | |
| 50 #define ERROR_ 0xFF | |
| 51 | |
| 52 #define CCRMODE_FixedSetpoint 0 | |
| 53 #define CCRMODE_Sensors 1 | |
| 662 | 54 #define CCRMODE_Simulation 2 |
| 38 | 55 |
| 56 #define DIVEMODE_OC 0 | |
| 57 #define DIVEMODE_CCR 1 | |
| 58 #define DIVEMODE_Gauge 2 | |
| 59 #define DIVEMODE_Apnea 3 | |
| 662 | 60 #define DIVEMODE_PSCR 4 |
| 38 | 61 |
| 62 #define GF_MODE 1 | |
| 63 #define VPM_MODE 2 | |
| 64 | |
| 65 #define VPM_FROM_FORTRAN 0 | |
| 66 #define VPM_BACHELORWORK 1 | |
| 67 | |
| 68 #define BUEHLMANN_OSTC4 0 | |
| 69 #define BUEHLMANN_hwOS 1 | |
| 70 | |
| 71 #define MMDDYY 0 | |
| 72 #define DDMMYY 1 | |
| 73 #define YYMMDD 2 | |
| 74 | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
75 #define PRESSURE_OFFSET_LIMIT_MBAR 50 |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
76 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
77 #define MAX_COMPASS_COMP (2u) |
| 640 | 78 #define MAX_VIEWPORT_MODE (0x7F) |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
79 |
| 676 | 80 #define MAX_SCRUBBER_TIME (999u) |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
81 #define MIN_SCRUBBER_TIME -99 |
| 652 | 82 #define MIN_PPO2_SP_CBAR (40u) |
| 650 | 83 |
| 662 | 84 #define PSCR_MAX_O2_DROP (15u) |
| 85 #define PSCR_MIN_LUNG_RATIO (5u) | |
| 86 #define PSCR_MAX_LUNG_RATIO (20u) | |
| 87 | |
| 691 | 88 #define UART_MAX_PROTOCOL (2u) |
| 89 | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
90 #define FUTURE_SPARE_SIZE (0u) /* Applied for reuse of old, not used, scooter block (was 32 bytes)*/ |
| 662 | 91 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
92 typedef enum |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
93 { |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
94 O2_SENSOR_SOURCE_OPTIC = 0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
95 O2_SENSOR_SOURCE_ANALOG, |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
96 O2_SENSOR_SOURCE_DIGITAL, |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
97 O2_SENSOR_SOURCE_ANADIG, |
| 691 | 98 #ifdef ENABLE_SENTINEL_MODE |
| 99 O2_SENSOR_SOURCE_SENTINEL, | |
| 100 #endif | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
101 O2_SENSOR_SOURCE_MAX |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
102 } SensorSource; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
103 #define MAX_O2_SENSOR_SOURCE (2u) |
| 546 | 104 |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
105 typedef enum |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
106 { |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
107 SCRUB_TIMER_OFF = 0, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
108 SCRUB_TIMER_MINUTES, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
109 SCRUB_TIMER_PERCENT, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
110 SCRUB_TIMER_END |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
111 } ScrubTimerMode_e; |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
112 |
| 38 | 113 /* 2015 Jan 30, hw, deco and travel added for MenuEditGas |
| 114 * can be used for buehlmann, vpm, etc. later but be carefull | |
| 115 * with current implemenation */ | |
| 116 typedef struct{ | |
| 117 uint8_t active:1; | |
| 118 uint8_t first:1; | |
| 119 uint8_t deco:1; | |
| 120 uint8_t travel:1; | |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
121 uint8_t off:1; |
|
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
122 uint8_t spare:3; |
| 38 | 123 } gasubit8_t; |
| 124 | |
| 125 typedef union{ | |
| 126 gasubit8_t ub; | |
| 127 uint8_t uw; | |
| 128 } gasbit8_Type; | |
| 129 | |
| 130 typedef struct{ | |
| 131 uint8_t standard:4; | |
| 132 uint8_t alternative:4; | |
| 133 } ubit2x4_t; | |
| 134 | |
| 135 typedef union{ | |
| 136 ubit2x4_t ub; | |
| 137 uint8_t uw; | |
| 138 } split2x4_Type; | |
| 139 | |
| 140 typedef union{ | |
| 141 uint8_t u8[4]; | |
| 142 uint32_t u32; | |
| 143 } general32to8_Type; | |
| 144 | |
| 145 typedef struct | |
| 146 { | |
| 147 uint8_t oxygen_percentage; | |
| 148 uint8_t helium_percentage; | |
| 149 gasbit8_Type note; | |
| 150 uint8_t depth_meter; | |
| 151 uint8_t depth_meter_travel; | |
| 152 uint8_t bottle_size_liter; | |
| 153 // uint8_t bottle_wireless_status; | |
| 154 uint16_t bottle_wireless_id; | |
| 155 } SGasLine; | |
| 156 | |
| 157 typedef struct | |
| 158 { | |
| 159 uint8_t setpoint_cbar; | |
| 160 uint8_t depth_meter; | |
| 161 gasbit8_Type note; | |
| 162 } SSetpointLine; | |
| 163 | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
164 |
| 710 | 165 typedef struct |
| 166 { | |
| 167 uint16_t TimerMax; | |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
168 int16_t TimerCur; |
| 710 | 169 RTC_DateTypeDef lastDive; |
| 170 } SScrubberData; | |
| 171 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
172 enum { |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
173 SETPOINT_INDEX_CUSTOM = 0, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
174 SETPOINT_INDEX_AUTO_LOW, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
175 SETPOINT_INDEX_AUTO_HIGH, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
176 SETPOINT_INDEX_AUTO_DECO, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
177 }; |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
178 |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
179 typedef struct |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
180 { |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
181 uint8_t FirstCorrection; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
182 uint8_t Corrections; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
183 } SSettingsStatus; |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
184 |
| 38 | 185 /* SSettings |
| 186 * gas[0] and setpoint[0] are the special ones configurable during the dive | |
| 187 */ | |
| 188 typedef struct | |
| 189 { | |
| 190 uint32_t header; | |
| 191 uint8_t warning_blink_dsec; | |
| 192 uint8_t lastDiveLogId; | |
| 193 uint32_t logFlashNextSampleStartAddress; | |
| 194 SGasLine gas[1 + (2*NUM_GASES)]; | |
| 195 SSetpointLine setpoint[1 + NUM_GASES]; | |
| 196 uint8_t CCR_Mode; | |
| 197 uint8_t dive_mode; | |
| 198 split2x4_Type deco_type; | |
| 199 uint8_t ppO2_max_deco; | |
| 200 uint8_t ppO2_max_std; | |
| 201 uint8_t ppO2_min; | |
| 202 uint8_t CNS_max; | |
| 203 uint8_t ascent_MeterPerMinute_max; | |
| 204 uint8_t ascent_MeterPerMinute_showGraph; | |
| 205 uint8_t future_TTS; | |
| 206 uint8_t GF_high; | |
| 207 uint8_t GF_low; | |
| 208 uint8_t aGF_high; | |
| 209 uint8_t aGF_low; | |
| 210 split2x4_Type VPM_conservatism; | |
| 211 uint8_t safetystopDuration; | |
| 212 uint8_t AtemMinutenVolumenLiter; | |
| 213 uint8_t ReserveFractionDenominator; | |
| 214 uint8_t salinity; | |
| 215 uint8_t last_stop_depth_meter; | |
| 216 uint8_t stop_increment_depth_meter; | |
| 217 uint8_t brightness; | |
| 218 uint8_t date_format; | |
| 219 uint8_t selected_language; | |
| 220 char customtext[60]; | |
| 221 uint16_t timeoutSurfacemode; | |
| 222 uint8_t timeoutMenuSurface; | |
| 223 uint8_t timeoutMenuDive; | |
| 224 uint8_t timeoutMenuEdit; | |
| 225 uint8_t timeoutInfo; | |
| 226 uint8_t timeoutInfoCompass; | |
| 227 uint8_t design; | |
| 228 uint16_t timeoutDiveReachedZeroDepth; | |
| 229 uint16_t divetimeToCreateLogbook; | |
| 230 uint8_t serialHigh; | |
| 231 uint8_t serialLow; | |
| 232 // SUFirmware firmwareVersion16to32bit; | |
| 233 uint32_t backup_localtime_rtc_tr; | |
| 234 uint32_t backup_localtime_rtc_dr; | |
| 235 uint16_t totalDiveCounter; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
236 uint16_t personalDiveCount; |
| 38 | 237 uint8_t showDebugInfo; |
| 238 uint8_t ButtonResponsiveness[4];// changed content in 0xFFFF0016 | |
| 239 uint8_t nonMetricalSystem; | |
| 240 uint8_t fallbackToFixedSetpoint; | |
| 241 uint8_t bluetoothActive; /* will be set to zero on each startup at the moment */ | |
| 242 uint8_t safetystopDepth; | |
| 243 uint32_t updateSettingsAllowedFromHeader; | |
| 662 | 244 uint8_t pscr_lung_ratio; /* redefined in 0xFFFF0020 */ |
| 245 uint8_t pscr_o2_drop; /* redefined in 0xFFFF0020 */ | |
| 246 uint8_t co2_sensor_active; /* redefined in 0xFFFF0021 */ | |
| 691 | 247 uint8_t ext_uart_protocol; /* redefined in 0xFFFF0022 */ |
| 710 | 248 |
| 249 uint8_t scubberActiveId; /* redefined in 0xFFFF0023 */ | |
| 250 SScrubberData scrubberData[2]; | |
| 796 | 251 uint8_t ext_sensor_map_Obsolete[5]; |
| 252 uint8_t buttonLockActive; /* redefined in 0xFFFF0025 */ | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
253 int8_t compassDeclinationDeg; |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
254 uint8_t delaySetpointLow; |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
255 uint16_t timerDurationS; /* redefined in 0xFFFF0026 */ |
| 662 | 256 uint8_t Future_SPARE[FUTURE_SPARE_SIZE]; /* redefined in 0xFFFF0020 (old scooter Block was 32 byte)*/ |
| 38 | 257 // new in 0xFFFF0006 |
| 258 uint8_t ppo2sensors_deactivated; | |
| 259 uint8_t tX_colorscheme; | |
| 260 uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 261 uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 262 uint8_t tX_customViewPrimary; | |
| 263 uint8_t tX_customViewTimeout; | |
| 264 uint8_t timeoutEnterButtonSelectDive; | |
| 265 uint16_t logbookOffset; | |
| 266 uint8_t alwaysShowPPO2; | |
| 267 uint8_t extraDisplay; | |
| 268 uint16_t display_toogle_desc; | |
| 269 int8_t offsetPressure_mbar; | |
| 270 int8_t offsetTemperature_centigrad; | |
| 271 uint8_t gasConsumption_travel_l_min; | |
| 272 uint8_t gasConsumption_bottom_l_min; | |
| 273 uint8_t gasConsumption_deco_l_min; | |
| 274 uint8_t debugModeOnStart; | |
| 275 uint8_t IAmStolenPleaseKillMe; | |
| 276 int16_t compassBearing; | |
| 277 uint8_t lastKnownBatteryPercentage; | |
| 278 uint8_t buttonBalance[3]; // 0 = right, 1 = center, 2 = left | |
| 279 uint8_t firmwareVersion[4]; | |
| 280 uint16_t timeoutSurfacemodeWithSensors; | |
| 281 // new in 0xFFFF0016 | |
| 282 uint8_t VPM_model; | |
| 283 uint8_t GF_model; | |
| 284 // new in 0xFFFF0017 | |
| 285 uint8_t FactoryButtonBase; | |
| 286 uint8_t FactoryButtonBalance[3]; | |
|
112
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
287 /* new in 0xFFFF0018 */ |
|
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
288 uint8_t FlipDisplay; |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
289 /* new in 0xFFFF0019 */ |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
290 uint32_t cv_configuration; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
291 /* new in 0xFFFF001A */ |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
292 uint8_t MotionDetection; |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
293 /* new in 0xFFFF001B */ |
|
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
294 uint32_t cv_config_BigScreen; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
295 /* new in 0xFFFF001C */ |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
296 uint8_t compassInertia; |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
539
diff
changeset
|
297 uint8_t tX_customViewPrimaryBF; |
| 546 | 298 /* new in 0xFFFF001D */ |
|
626
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
567
diff
changeset
|
299 uint8_t viewPortMode; /* 7-Reserve| 6..5 - Focus spot size | 4-Focusframe | 3-Reserve | 2..0-BacklightBoost */ |
| 546 | 300 uint16_t viewRoll; |
| 301 uint16_t viewPitch; | |
| 302 uint16_t viewYaw; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
303 /* new in 0xFFFF001E */ |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
304 uint8_t ppo2sensors_source; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
305 float ppo2sensors_calibCoeff[3]; |
| 567 | 306 uint8_t amPMTime; |
| 650 | 307 /* new in 0xFFFF001F */ |
| 308 uint8_t autoSetpoint; | |
| 710 | 309 uint16_t scrubTimerMax_Obsolete; /* have been replaced with new scrubber data format */ |
| 310 uint16_t scrubTimerCur_Obsolete; /* have been replaced with new scrubber data format */ | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
311 uint8_t scrubTimerMode; |
| 796 | 312 uint8_t ext_sensor_map[8]; /* redefined in 0xFFFF0027 */ |
| 38 | 313 } SSettings; |
| 314 | |
| 315 typedef struct | |
| 316 { | |
| 317 // 8 bytes | |
| 318 uint16_t primarySerial; | |
| 319 uint8_t primaryLicence; | |
| 320 uint8_t revision8bit; | |
| 321 uint8_t production_year; | |
| 322 uint8_t production_month; | |
| 323 uint8_t production_day; | |
| 324 uint8_t production_bluetooth_name_set; | |
| 325 | |
| 326 // 44 bytes | |
| 327 char production_info[44]; | |
| 328 | |
| 329 // 8 bytes | |
| 330 uint16_t secondarySerial; | |
| 331 uint8_t secondaryLicence; | |
| 332 uint8_t secondaryReason8bit; | |
| 333 uint8_t secondary_year; | |
| 334 uint8_t secondary_month; | |
| 335 uint8_t secondary_day; | |
| 336 uint8_t secondary_bluetooth_name_set; | |
| 337 | |
| 338 // 4 bytes | |
| 339 char secondary_info[4]; | |
| 340 } SHardwareData; | |
| 341 | |
| 342 uint8_t writeData(uint8_t *); | |
| 343 uint8_t readData(uint8_t what,uint8_t *); | |
| 344 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data); | |
| 345 | |
| 346 uint8_t getPPO2Max(void); | |
| 347 uint8_t getPPO2Min(void); | |
| 348 uint8_t getDiveMode(void); | |
| 349 uint8_t getCCRMode(void); | |
| 350 uint8_t getDecoType(void); | |
| 351 uint8_t getFutureTTS(void); | |
| 352 | |
| 353 SSettings* settingsGetPointer(void); | |
| 354 const SSettings* settingsGetPointerStandard(void); | |
| 355 void set_settings_to_Standard(void); | |
| 356 void mod_settings_for_first_start_with_empty_ext_flash(void); | |
| 357 const SFirmwareData* firmwareDataGetPointer(void); | |
| 358 const SHardwareData* hardwareDataGetPointer(void); | |
| 359 uint8_t firmwareVersion_16bit_high(void); | |
| 360 uint8_t firmwareVersion_16bit_low(void); | |
| 361 void hardwareBatchCode(uint8_t *high, uint8_t *low); | |
| 362 | |
| 363 uint8_t RTEminimum_required_high(void); | |
| 364 uint8_t RTEminimum_required_low(void); | |
| 365 uint8_t FONTminimum_required_high(void); | |
| 366 uint8_t FONTminimum_required_low(void); | |
| 367 | |
| 368 void setActualRTEversion(uint8_t high, uint8_t low); | |
| 369 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow); | |
| 370 | |
| 371 void set_new_settings_missing_in_ext_flash(void); | |
| 372 uint8_t check_and_correct_settings(void); | |
| 373 uint8_t newFirmwareVersionCheckViaSettings(void); | |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
758
diff
changeset
|
374 void set_settings_button_to_factory_with_individual_buttonBalance(void); |
| 38 | 375 uint8_t getLicence(void); |
| 376 void firmwareGetDate(RTC_DateTypeDef *SdateOutput); | |
| 377 | |
| 378 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 379 | |
| 380 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray); | |
| 381 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray); | |
| 382 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray); | |
| 383 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray); | |
| 384 | |
| 385 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 386 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage); | |
| 387 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC); | |
| 388 | |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
389 void get_CorrectionStatus(SSettingsStatus* Status); |
| 662 | 390 void reset_SettingWarning(); |
| 391 uint8_t isSettingsWarning(); | |
| 392 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
393 bool checkAndFixSetpointSettings(void); |
| 38 | 394 #endif // SETTINGS_H |