Mercurial > public > ostc4
annotate Discovery/Src/tMenuEditGasOC.c @ 754:ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
In the previous version the autodetection was visible even if not supported by hardware. The autodetection will now only be shown if the ADC is available (new HW revision). A future improvment could be to make the decision based on a special HW number which indicates a OSTC4 version with external pin connector.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 07 Mar 2023 19:55:13 +0100 |
| parents | 39f48356049b |
| children | 2c243233c999 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tMenuEditGasOC.c | |
| 5 /// \brief Main Template file for editing Open Circuit Gas Settings | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 09-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "tMenuEditGasOC.h" | |
| 31 | |
| 32 #include "check_warning.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "tMenuEdit.h" | |
| 35 #include "unit.h" | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
36 #include "configuration.h" |
| 38 | 37 |
| 38 /* Private types -------------------------------------------------------------*/ | |
| 39 typedef struct | |
| 40 { | |
| 41 uint8_t gasID; | |
| 42 SGasLine * pGasLine; | |
| 43 uint8_t mod; | |
| 44 uint8_t ccr; | |
| 45 uint8_t setpoint; | |
| 46 } SEditGasPage; | |
| 47 | |
| 48 | |
| 49 /* Private variables ---------------------------------------------------------*/ | |
| 50 SEditGasPage editGasPage; | |
| 51 | |
| 52 /* Private function prototypes -----------------------------------------------*/ | |
| 53 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2); | |
| 54 | |
| 55 void openEdit_Gas(uint8_t line, uint8_t ccr); | |
| 56 void openEdit_GasType(void); | |
| 57 | |
| 58 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr); | |
| 59 void openEdit_SpecialDiveGasMenu(uint8_t ccr); | |
| 60 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr); | |
| 61 | |
| 62 void tMEGas_check_switch_to_bailout(void); | |
| 63 | |
| 64 /* Announced function prototypes -----------------------------------------------*/ | |
| 65 uint8_t OnAction_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 66 uint8_t OnAction_GasType (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 67 uint8_t OnAction_ChangeDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 68 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 69 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 70 | |
| 71 uint8_t OnAction_First (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 72 uint8_t OnAction_Deco (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 73 uint8_t OnAction_Travel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 74 uint8_t OnAction_Inactive (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
75 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 76 |
| 77 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 78 uint8_t OnAction_DM_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 79 | |
| 80 /* | |
| 81 uint8_t OnAction_DefaultMix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 82 uint8_t OnAction_ToggleDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 83 uint8_t OnAction_ToggleDefault (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 84 uint8_t OnAction_DefaultDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 85 */ | |
| 86 | |
| 87 /* Exported functions --------------------------------------------------------*/ | |
| 88 | |
| 89 void openEdit_GasCC(uint8_t line) | |
| 90 { | |
| 91 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
92 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
93 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
94 { |
| 662 | 95 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
96 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
97 selectPage(StMOG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
98 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
99 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
100 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
101 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
102 openEdit_Gas(line , 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
103 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
104 } |
| 38 | 105 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
106 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
107 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
108 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
109 openEdit_SpecialDiveGasMenu(1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
110 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
111 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
112 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
113 openEdit_DiveGasSelect(line, 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
114 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
115 } |
| 38 | 116 } |
| 117 | |
| 118 | |
| 119 void openEdit_GasOC(uint8_t line) | |
| 120 { | |
| 121 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
122 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
123 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
124 { |
| 662 | 125 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
126 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
127 selectPage(StMCG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
128 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
129 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
130 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
131 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
132 openEdit_Gas(line, 0); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
133 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
134 } |
| 38 | 135 else |
| 136 if(line == 6) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
137 { |
| 38 | 138 openEdit_SpecialDiveGasMenu(0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
139 } |
| 38 | 140 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
141 { |
| 38 | 142 openEdit_DiveGasSelect(line, 0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
143 } |
| 38 | 144 } |
| 145 | |
| 146 | |
| 147 /* dive mode */ | |
| 148 void openEdit_DiveSelectBetterGas(void) | |
| 149 { | |
| 150 uint8_t gasId, ccr; | |
| 151 | |
| 152 gasId = actualBetterGasId(); | |
| 153 ccr = 0; | |
| 154 if(gasId>5) | |
| 155 { | |
| 156 gasId -= 5; | |
| 157 ccr = 1; | |
| 158 } | |
| 159 openEdit_DiveGasSelect_Subroutine(gasId,ccr); | |
| 160 if(ccr) | |
| 161 updateSpecificMenu(StMCG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 162 else | |
| 163 updateSpecificMenu(StMOG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 164 } | |
| 165 | |
| 166 | |
| 167 /* select gas in divemode */ | |
| 168 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr) | |
| 169 { | |
| 682 | 170 if(!ccr) |
| 171 { | |
| 172 tMEGas_check_switch_to_bailout(); | |
| 173 } | |
| 174 openEdit_DiveGasSelect_Subroutine(line, ccr); | |
| 175 | |
| 38 | 176 exitMenuEdit_to_Home_with_Menu_Update(); |
| 177 } | |
| 178 | |
| 179 | |
| 180 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr) | |
| 181 { | |
| 182 uint8_t setpoint; | |
| 183 | |
| 699 | 184 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 185 |
| 186 if(ccr) | |
| 187 { | |
| 188 editGasPage.gasID = line + NUM_OFFSET_DILUENT; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
189 setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 190 } |
| 191 else | |
| 192 { | |
| 193 editGasPage.gasID = line; | |
| 194 setpoint = 0; | |
| 195 } | |
| 196 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
197 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
198 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.off) /* disable selection of switched off gases */ |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
199 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
200 return; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
201 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
202 #endif |
| 38 | 203 for(int i=0;i<(1+ (2*NUM_GASES));i++) |
| 204 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 205 | |
| 206 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 207 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 1; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
208 setActualGas_DM(&stateUsedWrite->lifeData,editGasPage.gasID,setpoint); |
| 38 | 209 } |
| 210 | |
| 211 /* extra gas and gas on/off option */ | |
| 212 void openEdit_SpecialDiveGasMenu(uint8_t ccr) | |
| 213 { | |
| 214 char text[32]; | |
| 215 uint8_t oxygen, helium, gasOffset, textpointer, lineCount, ptrGas; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
216 //SDiveState * pState; |
| 38 | 217 |
| 699 | 218 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 219 if(ccr) |
| 220 { | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
221 editGasPage.setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 222 } |
| 223 editGasPage.ccr = ccr; | |
| 224 | |
| 225 set_globalState_Menu_Line(6); | |
| 226 | |
| 227 if(ccr) | |
| 228 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 229 else | |
| 230 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 231 | |
| 232 if(ccr) | |
| 233 gasOffset = NUM_OFFSET_DILUENT; | |
| 234 else | |
| 235 gasOffset = 0; | |
| 236 | |
| 237 | |
| 238 text[0] = '\001'; | |
| 239 text[1] = TXT_2BYTE; | |
| 240 if(ccr) | |
| 241 text[2] = TXT2BYTE_SpecialDiveGasMenuCCR; | |
| 242 else | |
| 243 text[2] = TXT2BYTE_SpecialDiveGasMenu; | |
| 244 text[3] = 0; | |
| 245 write_topline(text); | |
| 246 | |
| 247 lineCount = 1; | |
| 248 | |
| 249 | |
| 250 for(int i=1; i<=5; i++) | |
| 251 { | |
| 252 ptrGas = i + gasOffset; | |
| 253 oxygen = stateUsed->diveSettings.gas[ptrGas].oxygen_percentage; | |
| 254 helium = stateUsed->diveSettings.gas[ptrGas].helium_percentage; | |
| 255 | |
| 256 if(oxygen == 100) | |
| 257 textpointer = snprintf(text,10,"Oxy"); | |
| 258 else | |
| 259 if((oxygen == 21) && (helium == 0)) | |
| 260 textpointer = snprintf(text,10,"Air"); | |
| 261 else | |
| 262 textpointer = snprintf(text,10,"%02i/%02i",oxygen,helium); | |
| 263 | |
| 264 if(editGasPage.pGasLine[ptrGas].note.ub.first) | |
| 265 strcpy(&text[textpointer]," *"); | |
| 266 | |
| 267 write_field_on_off(StMOG_DM_ActiveBase+i, 30, 500, ME_Y_LINE_BASE + (lineCount * ME_Y_LINE_STEP), &FontT48, text, stateUsed->diveSettings.gas[ptrGas].note.ub.active); | |
| 268 lineCount++; | |
| 269 } | |
| 270 | |
| 271 if(!ccr) | |
| 272 { | |
| 273 if(stateUsed->diveSettings.gas[0].note.ub.first) | |
| 274 { | |
| 275 oxygen = stateUsed->diveSettings.gas[0].oxygen_percentage; | |
| 276 helium = stateUsed->diveSettings.gas[0].helium_percentage; | |
| 277 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas *", oxygen, helium, 0, 0); | |
| 278 } | |
| 279 else | |
| 280 { | |
| 281 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas", 0, 0, 0, 0); | |
| 282 } | |
| 283 } | |
| 284 | |
| 285 for(int i=1; i<=5; i++) | |
| 286 { | |
| 287 setEvent(StMOG_DM_ActiveBase + i,(uint32_t)OnAction_DM_Active); | |
| 288 } | |
| 289 | |
| 290 if(!ccr) | |
| 291 setEvent(StMOG_DM_ExtraMix,(uint32_t)OnAction_DM_Mix); | |
| 292 } | |
| 293 | |
| 294 | |
| 295 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 296 { | |
| 297 uint8_t gasOffset, newActive; | |
| 298 | |
| 299 if(editGasPage.ccr) | |
| 300 gasOffset = NUM_OFFSET_DILUENT; | |
| 301 else | |
| 302 gasOffset = 0; | |
| 303 | |
| 304 editGasPage.gasID = editId + gasOffset - StMOG_DM_ActiveBase; | |
| 305 | |
| 306 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.first) | |
| 307 return UNSPECIFIC_RETURN; | |
| 308 | |
| 309 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 310 newActive = 0; | |
| 311 else | |
| 312 newActive = 1; | |
| 313 | |
| 314 tMenuEdit_set_on_off(editId, newActive); | |
| 315 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = newActive; | |
| 316 | |
| 317 return UNSPECIFIC_RETURN; | |
| 318 } | |
| 319 | |
| 320 /* only for OC */ | |
| 321 uint8_t OnAction_DM_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 322 { | |
| 323 uint8_t digitContentNew; | |
| 324 uint32_t newOxygen, newHelium; | |
| 325 | |
| 326 if(action == ACTION_BUTTON_ENTER) | |
| 327 { | |
| 328 return digitContent; | |
| 329 } | |
| 330 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 331 { | |
| 332 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 333 | |
| 334 if(newOxygen < 5) | |
| 335 newOxygen = 5; | |
| 336 if(newOxygen == 99) | |
| 337 newOxygen = 100; | |
| 338 if(newHelium > 95) | |
| 339 newHelium = 95; | |
| 340 if((newOxygen + newHelium) > 100) | |
| 341 newOxygen = 100 - newHelium; | |
| 342 | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
343 //SDiveState * pDiveState = 0; |
| 38 | 344 |
| 345 for(int i=1;i<=(2*NUM_GASES);i++) | |
| 346 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 347 | |
|
735
39f48356049b
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
heinrichsweikamp
parents:
699
diff
changeset
|
348 tMEGas_check_switch_to_bailout(); |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
349 setActualGas_ExtraGas(&stateUsedWrite->lifeData, newOxygen, newHelium, 0); |
| 38 | 350 return EXIT_TO_HOME; |
| 351 } | |
| 352 if(action == ACTION_BUTTON_NEXT) | |
| 353 { | |
| 354 digitContentNew = digitContent + 1; | |
| 355 if(digitContentNew > '9') | |
| 356 digitContentNew = '0'; | |
| 357 return digitContentNew; | |
| 358 } | |
| 359 if(action == ACTION_BUTTON_BACK) | |
| 360 { | |
| 361 digitContentNew = digitContent - 1; | |
| 362 if(digitContentNew < '0') | |
| 363 digitContentNew = '9'; | |
| 364 return digitContentNew; | |
| 365 } | |
| 366 | |
| 367 return UNSPECIFIC_RETURN; | |
| 368 } | |
| 369 | |
| 370 | |
| 371 void tMEGas_check_switch_to_bailout(void) | |
| 372 { | |
| 662 | 373 if(isLoopMode(stateUsed->diveSettings.diveMode)) |
| 38 | 374 { |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
375 stateUsedWrite->diveSettings.diveMode = DIVEMODE_OC; |
| 38 | 376 block_diluent_page(); |
| 377 } | |
| 378 } | |
| 379 | |
| 380 | |
| 381 /* surface mode */ | |
| 382 void openEdit_Gas(uint8_t line, uint8_t ccr) | |
| 383 { | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
384 uint8_t gasID, oxygen, helium, depthDeco, active, first, depthMOD, deco, travel, inactive, off;//, bottleSizeLiter; |
| 38 | 385 |
| 386 char text[32]; | |
| 387 char textMOD[32]; | |
| 388 uint8_t txtptr; | |
| 389 | |
| 390 if(line) | |
| 391 set_globalState_Menu_Line(line); | |
| 392 else | |
| 393 set_globalState_Menu_Line(NUM_GASES + 1); | |
| 394 | |
| 395 if(ccr) | |
| 396 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 397 else | |
| 398 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 399 | |
| 400 if(ccr) | |
| 401 gasID = line + NUM_OFFSET_DILUENT; | |
| 402 else | |
| 403 gasID = line; | |
| 404 | |
| 405 editGasPage.ccr = ccr; | |
| 406 editGasPage.gasID = gasID; | |
| 407 editGasPage.mod = calc_MOD(gasID); | |
| 408 | |
| 409 SSettings *data = settingsGetPointer(); | |
| 410 editGasPage.pGasLine = data->gas; | |
| 411 | |
| 412 oxygen = editGasPage.pGasLine[gasID].oxygen_percentage; | |
| 413 if(oxygen > 99) | |
| 414 oxygen = 99; | |
| 415 helium = editGasPage.pGasLine[gasID].helium_percentage; | |
| 416 depthDeco = editGasPage.pGasLine[gasID].depth_meter; | |
| 417 //depthTravel = editGasPage.pGasLine[gasID].depth_meter_travel; | |
| 418 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 419 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 420 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 421 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
422 off = editGasPage.pGasLine[gasID].note.ub.off; |
| 38 | 423 //bottleSizeLiter = editGasPage.pGasLine[gasID].bottle_size_liter; |
| 424 | |
| 425 if(active) | |
| 426 inactive = 0; | |
| 427 else | |
| 428 inactive = 1; | |
| 429 | |
| 430 depthMOD = editGasPage.mod; | |
| 431 | |
| 432 int i = 0; | |
| 433 if(gasID >= 10) | |
| 434 { | |
| 435 i = 1; | |
| 436 strcpy(text, "\001" "Gas #10 X"); | |
| 437 } | |
| 438 else | |
| 439 strcpy(text, "\001" "Gas #0 X"); | |
| 440 | |
| 441 if(ccr) | |
| 442 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 443 else | |
| 444 text[8+i] = TXT_OC_Gas_Edit; | |
| 445 | |
| 446 if(gasID >= 10) | |
| 447 text[6+i] += gasID - 10; | |
| 448 else | |
| 449 text[6+i] += gasID; | |
| 450 | |
| 451 write_topline(text); | |
| 452 if(actual_menu_content == MENU_SURFACE) | |
| 453 { | |
| 454 write_label_fix( 20, 800, ME_Y_LINE1, &FontT48, TXT_Mix); | |
| 455 write_field_udigit(StMOG_Mix, 210, 400, ME_Y_LINE1, &FontT48, "##/##", (uint32_t)oxygen, (uint32_t)helium, 0, 0); | |
| 456 | |
| 457 | |
| 458 text[1] = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
459 if(off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
460 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
461 else |
| 38 | 462 if(inactive) |
| 463 text[0] = TXT_Inactive; | |
| 464 else | |
| 465 if(first) | |
| 466 text[0] = TXT_First; | |
| 467 else | |
| 468 if(deco) | |
| 469 text[0] = TXT_Deco; | |
| 470 else | |
| 471 if(travel) | |
| 472 text[0] = TXT_Travel; | |
| 473 else | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
474 text[0] = TXT_Inactive; |
| 38 | 475 |
| 476 write_field_button(StMOG_GasType, 20, 710, ME_Y_LINE2, &FontT48, text); | |
| 477 | |
| 478 | |
| 479 if(deco) | |
| 480 { | |
| 481 text[0] = TXT_ChangeDepth; | |
| 482 text[1] = ' '; | |
| 483 text[2] = TXT_Deco; | |
| 484 text[3] = 0; | |
| 485 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 486 | |
| 487 textMOD[0] = '#'; | |
| 488 textMOD[1] = '#'; | |
| 489 textMOD[2] = '#'; | |
| 490 textMOD[3] = unit_depth_char1(); | |
| 491 textMOD[4] = unit_depth_char2(); | |
| 492 textMOD[5] = 0; | |
| 493 write_field_udigit(StMOG_ChangeDepth, 600, 710, ME_Y_LINE3, &FontT48,textMOD, (uint32_t)unit_depth_integer(depthDeco), 0, 0, 0); | |
| 494 | |
| 495 txtptr = 0; | |
| 496 text[txtptr++] = TXT_2BYTE; | |
| 497 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 498 text[txtptr++] = 0; | |
| 499 write_field_button(StMOG_SetToMOD, 20, 710, ME_Y_LINE4, &FontT48,text); | |
| 500 } | |
| 501 else | |
| 502 { | |
| 503 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
504 text[txtptr++] = '\031'; |
| 38 | 505 text[txtptr++] = TXT_ChangeDepth; |
| 506 text[txtptr++] = ' '; | |
| 507 text[txtptr++] = TXT_Deco; | |
| 508 text[txtptr++] = 0; | |
| 509 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 510 | |
| 511 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
512 text[txtptr++] = '\031'; |
| 38 | 513 text[txtptr++] = TXT_2BYTE; |
| 514 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 515 text[txtptr++] = 0; | |
| 516 write_label_var( 20 ,800, ME_Y_LINE4, &FontT48, text); | |
| 517 } | |
| 518 /* | |
| 519 txtptr = 0; | |
| 520 text[txtptr++] = TXT_2BYTE; | |
| 521 text[txtptr++] = TXT2BYTE_Bottle; | |
| 522 text[txtptr++] = 0; | |
| 523 write_label_var( 20 ,800, ME_Y_LINE5, &FontT48, text); | |
| 524 write_field_2digit(StMOG_Bottle, 600, 710, ME_Y_LINE5, &FontT48,"## ltr", (uint32_t)bottleSizeLiter, 0, 0, 0); | |
| 525 | |
| 526 */ | |
| 527 stop_cursor_fields(); | |
| 528 | |
| 529 textMOD[0] = '#'; | |
| 530 textMOD[1] = '#'; | |
| 531 textMOD[2] = '#'; | |
| 532 textMOD[3] = unit_depth_char1(); | |
| 533 textMOD[4] = unit_depth_char2(); | |
| 534 textMOD[5] = ' '; | |
| 535 textMOD[6] = 'M'; | |
| 536 textMOD[7] = 'O'; | |
| 537 textMOD[8] = 'D'; | |
| 538 textMOD[9] = 0; | |
| 539 | |
| 540 write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, textMOD, (uint32_t)unit_depth_integer(depthMOD), 0, 0, 0); | |
| 541 // write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, "###m MOD", (uint32_t)depthMOD, 0, 0, 0); | |
| 542 | |
| 543 setEvent(StMOG_Mix, (uint32_t)OnAction_Mix); | |
| 544 setEvent(StMOG_GasType, (uint32_t)OnAction_GasType); | |
| 545 | |
| 546 if(deco) | |
| 547 { | |
| 548 setEvent(StMOG_ChangeDepth, (uint32_t)OnAction_ChangeDepth); | |
| 549 setEvent(StMOG_SetToMOD, (uint32_t)OnAction_SetToMOD); | |
| 550 } | |
| 551 /* | |
| 552 setEvent(StMOG_Bottle, (uint32_t)OnAction_BottleSize); | |
| 553 */ | |
| 554 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 555 } | |
| 556 } | |
| 557 | |
| 558 /* surface mode */ | |
| 559 void openEdit_GasType(void) | |
| 560 { | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
561 uint8_t gasID, active, first, deco, travel, inactive, off; |
| 38 | 562 char text[32]; |
| 563 | |
| 564 | |
| 565 if(editGasPage.ccr) | |
| 566 { | |
| 567 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 568 setBackMenu((uint32_t)openEdit_GasCC, editGasPage.gasID - NUM_OFFSET_DILUENT, 2); | |
| 569 } | |
| 570 else | |
| 571 { | |
| 572 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 573 setBackMenu((uint32_t)openEdit_GasOC, editGasPage.gasID, 2); | |
| 574 } | |
| 575 | |
| 576 gasID = editGasPage.gasID; | |
| 577 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 578 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 579 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 580 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
581 off = editGasPage.pGasLine[gasID].note.ub.off; |
| 38 | 582 |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
583 if((active) || (off)) |
| 38 | 584 inactive = 0; |
| 585 else | |
| 586 inactive = 1; | |
| 587 | |
| 588 | |
| 589 /* header */ | |
| 590 int i = 0; | |
| 591 if(gasID >= 10) | |
| 592 { | |
| 593 i = 1; | |
| 594 strcpy(text, "\001" "Gas #10 X"); | |
| 595 } | |
| 596 else | |
| 597 strcpy(text, "\001" "Gas #0 X"); | |
| 598 | |
| 599 if(editGasPage.ccr) | |
| 600 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 601 else | |
| 602 text[8+i] = TXT_OC_Gas_Edit; | |
| 603 | |
| 604 if(gasID >= 10) | |
| 605 text[6+i] += gasID - 10; | |
| 606 else | |
| 607 text[6+i] += gasID; | |
| 608 write_topline(text); | |
| 609 | |
| 610 text[1] = 0; | |
| 611 text[0] = TXT_First; | |
| 612 write_field_on_off(StMOG_First, 30, 400, ME_Y_LINE1, &FontT48, text, first); | |
| 613 | |
| 614 text[0] = TXT_Deco; | |
| 615 write_field_on_off(StMOG_Deco, 30, 400, ME_Y_LINE2, &FontT48, text, deco); | |
| 616 | |
| 617 text[0] = TXT_Travel; | |
| 618 write_field_on_off(StMOG_Travel, 30, 400, ME_Y_LINE3, &FontT48, text, travel); | |
| 619 | |
| 620 text[0] = TXT_Inactive; | |
| 621 write_field_on_off(StMOG_Inactive, 30, 400, ME_Y_LINE4, &FontT48, text, inactive); | |
| 622 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
623 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
624 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
625 write_field_on_off(StMOG_Off, 30, 400, ME_Y_LINE5, &FontT48, text, off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
626 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
627 |
| 38 | 628 setEvent(StMOG_First, (uint32_t)OnAction_First); |
| 629 setEvent(StMOG_Deco, (uint32_t)OnAction_Deco); | |
| 630 setEvent(StMOG_Travel, (uint32_t)OnAction_Travel); | |
| 631 setEvent(StMOG_Inactive, (uint32_t)OnAction_Inactive); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
632 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
633 setEvent(StMOG_Off, (uint32_t)OnAction_Off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
634 #endif |
| 38 | 635 |
| 636 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 637 } | |
| 638 | |
| 639 uint8_t OnAction_GasType(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 640 { | |
| 641 openEdit_GasType(); | |
| 642 return UNSPECIFIC_RETURN; | |
| 643 } | |
| 644 | |
| 645 uint8_t OnAction_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 646 { | |
| 647 uint8_t digitContentNew; | |
| 648 uint32_t newOxygen, newHelium; | |
| 649 | |
| 650 if(action == ACTION_BUTTON_ENTER) | |
| 651 { | |
| 652 return digitContent; | |
| 653 } | |
| 654 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 655 { | |
| 656 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 657 | |
| 658 if(newOxygen < 5) | |
| 659 newOxygen = 5; | |
| 660 if(newOxygen == 99) | |
| 661 newOxygen = 100; | |
| 662 if(newHelium > 95) | |
| 663 newHelium = 95; | |
| 664 if((newOxygen + newHelium) > 100) | |
| 665 newOxygen = 100 - newHelium; | |
| 666 | |
| 667 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 668 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 669 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 670 | |
| 671 if(newOxygen == 100) | |
| 672 newOxygen = 99; | |
| 673 | |
| 674 tMenuEdit_newInput(editId, newOxygen, newHelium, 0, 0); | |
| 675 tMenuEdit_newInput(StMOG_MOD, (uint32_t)unit_depth_integer(editGasPage.mod), 0, 0, 0); | |
| 676 | |
| 677 return UPDATE_DIVESETTINGS; | |
| 678 } | |
| 679 if(action == ACTION_BUTTON_NEXT) | |
| 680 { | |
| 681 digitContentNew = digitContent + 1; | |
| 682 if(digitContentNew > '9') | |
| 683 digitContentNew = '0'; | |
| 684 return digitContentNew; | |
| 685 } | |
| 686 if(action == ACTION_BUTTON_BACK) | |
| 687 { | |
| 688 digitContentNew = digitContent - 1; | |
| 689 if(digitContentNew < '0') | |
| 690 digitContentNew = '9'; | |
| 691 return digitContentNew; | |
| 692 } | |
| 693 | |
| 694 return UNSPECIFIC_RETURN; | |
| 695 } | |
| 696 | |
| 697 /* | |
| 698 uint8_t OnAction_DefaultMix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 699 { | |
| 700 uint32_t newOxygen, newHelium; | |
| 701 uint8_t depthDEFAULT; | |
| 702 char text[32]; | |
| 703 | |
| 704 newOxygen = 21; | |
| 705 newHelium = 0; | |
| 706 | |
| 707 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 708 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 709 | |
| 710 tMenuEdit_newInput(StMOG_Mix, newOxygen, newHelium, 0, 0); | |
| 711 | |
| 712 depthDEFAULT = calc_MOD(editGasPage.gasID); | |
| 713 create_text_with_u8(text, "", depthDEFAULT, "m MOD"); | |
| 714 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 715 | |
| 716 return UPDATE_DIVESETTINGS; | |
| 717 } | |
| 718 | |
| 719 uint8_t OnAction_ToggleDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 720 { | |
| 721 uint8_t depth; | |
| 722 uint32_t newDefaultDepth; | |
| 723 char text[32]; | |
| 724 | |
| 725 if(editGasPage.depth_mode == 0) | |
| 726 { | |
| 727 editGasPage.depth_mode = 1; | |
| 728 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel; | |
| 729 newDefaultDepth = calc_MinOD(editGasPage.gasID); | |
| 730 create_text_with_u8(text, "", newDefaultDepth, "m Min"); | |
| 731 } | |
| 732 else | |
| 733 { | |
| 734 editGasPage.depth_mode = 0; | |
| 735 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter; | |
| 736 newDefaultDepth = calc_MOD(editGasPage.gasID); | |
| 737 create_text_with_u8(text, "", newDefaultDepth, "m MOD"); | |
| 738 } | |
| 739 tMenuEdit_newInput(StMOG_Depth, (uint32_t)depth, 0, 0, 0); | |
| 740 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 741 | |
| 742 return UNSPECIFIC_RETURN; | |
| 743 } | |
| 744 | |
| 745 | |
| 746 uint8_t OnAction_Depth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 747 { | |
| 748 uint8_t digitContentNew; | |
| 749 uint32_t newDepth; | |
| 750 | |
| 751 if(action == ACTION_BUTTON_ENTER) | |
| 752 { | |
| 753 return digitContent; | |
| 754 } | |
| 755 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 756 { | |
| 757 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 758 if(newDepth > 255) | |
| 759 newDepth = 255; | |
| 760 if(editGasPage.depth_mode == 0) | |
| 761 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 762 else | |
| 763 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 764 tMenuEdit_newInput(editId, newDepth, 0, 0, 0); | |
| 765 return UPDATE_DIVESETTINGS; | |
| 766 } | |
| 767 if(action == ACTION_BUTTON_NEXT) | |
| 768 { | |
| 769 digitContentNew = digitContent + 1; | |
| 770 if(digitContentNew > '9') | |
| 771 digitContentNew = '0'; | |
| 772 return digitContentNew; | |
| 773 } | |
| 774 if(action == ACTION_BUTTON_BACK) | |
| 775 { | |
| 776 digitContentNew = digitContent - 1; | |
| 777 if(digitContentNew < '0') | |
| 778 digitContentNew = '9'; | |
| 779 return digitContentNew; | |
| 780 } | |
| 781 | |
| 782 return UNSPECIFIC_RETURN; | |
| 783 } | |
| 784 | |
| 785 | |
| 786 uint8_t OnAction_DefaultDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 787 { | |
| 788 uint32_t newDepth; | |
| 789 | |
| 790 if(editGasPage.depth_mode == 0) | |
| 791 { | |
| 792 newDepth = calc_MOD(editGasPage.gasID); | |
| 793 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 794 } | |
| 795 else | |
| 796 { | |
| 797 newDepth = calc_MinOD(editGasPage.gasID); | |
| 798 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 799 } | |
| 800 | |
| 801 tMenuEdit_newInput(StMOG_Depth, newDepth, 0, 0, 0); | |
| 802 | |
| 803 return UPDATE_DIVESETTINGS; | |
| 804 } | |
| 805 | |
| 806 | |
| 807 uint8_t OnAction_Active(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 808 { | |
| 809 uint8_t active, first; | |
| 810 | |
| 811 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 812 | |
| 813 if(first) | |
| 814 return UNSPECIFIC_RETURN; | |
| 815 | |
| 816 active = editGasPage.pGasLine[editGasPage.gasID].note.ub.active; | |
| 817 | |
| 818 if(active) | |
| 819 { | |
| 820 active = 0; | |
| 821 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 822 } | |
| 823 else | |
| 824 { | |
| 825 active = 1; | |
| 826 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 827 } | |
| 828 tMenuEdit_set_on_off(editId, active); | |
| 829 | |
| 830 return UPDATE_DIVESETTINGS; | |
| 831 } | |
| 832 */ | |
| 833 | |
| 834 | |
| 835 uint8_t OnAction_First(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 836 { | |
| 837 uint8_t first, i, gasOne; | |
| 838 | |
| 839 if(editGasPage.ccr) | |
| 840 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 841 else | |
| 842 gasOne = 1; | |
| 843 | |
| 844 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 845 | |
| 846 if(!first) | |
| 847 { | |
| 848 for(i=gasOne;i<NUM_GASES + gasOne;i++) | |
| 849 { | |
| 850 if(editGasPage.pGasLine[i].note.ub.first) | |
| 851 { | |
| 852 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 853 editGasPage.pGasLine[i].note.ub.active = 0; | |
| 854 } | |
| 855 } | |
| 856 } | |
| 857 | |
| 858 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 1; | |
| 859 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 860 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 861 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
862 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 863 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 864 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 865 | |
| 866 tMenuEdit_set_on_off(StMOG_First, 1); | |
| 867 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 868 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 869 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
870 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
871 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
872 #endif |
| 38 | 873 |
| 874 if(!first) | |
| 875 return UPDATE_DIVESETTINGS; | |
| 876 else | |
| 877 return UPDATE_AND_EXIT_TO_MENU; | |
| 878 } | |
| 879 | |
| 880 | |
| 881 uint8_t OnAction_Deco(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 882 { | |
| 883 uint8_t first, deco, gasOne; | |
| 884 | |
| 885 if(editGasPage.ccr) | |
| 886 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 887 else | |
| 888 gasOne = 1; | |
| 889 | |
| 890 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 891 deco = editGasPage.pGasLine[editGasPage.gasID].note.ub.deco; | |
| 892 | |
| 893 if(first) | |
| 894 { | |
| 895 if(editGasPage.gasID == gasOne) | |
| 896 return UNSPECIFIC_RETURN; | |
| 897 else | |
| 898 { | |
| 899 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 900 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 901 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 902 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 903 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 904 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 905 } | |
| 906 } | |
| 907 | |
| 908 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 909 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 910 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 1; | |
| 911 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
912 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 913 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; |
| 914 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 915 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 916 | |
| 917 /* | |
| 918 if(deco) | |
| 919 { | |
| 920 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 921 tMenuEdit_newInput(StMOG_ChangeDepth, editGasPage.pGasLine[editGasPage.gasID].depth_meter, 0, 0, 0); | |
| 922 } | |
| 923 */ | |
| 924 | |
| 925 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 926 tMenuEdit_set_on_off(StMOG_Deco, 1); | |
| 927 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 928 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
929 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
930 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
931 #endif |
| 38 | 932 |
| 933 if(!deco) | |
| 934 return UPDATE_DIVESETTINGS; | |
| 935 else | |
| 936 return UPDATE_AND_EXIT_TO_MENU; | |
| 937 } | |
| 938 | |
| 939 | |
| 940 uint8_t OnAction_Travel(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 941 { | |
| 942 uint8_t first, travel, gasOne; | |
| 943 | |
| 944 if(editGasPage.ccr) | |
| 945 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 946 else | |
| 947 gasOne = 1; | |
| 948 | |
| 949 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 950 travel = editGasPage.pGasLine[editGasPage.gasID].note.ub.travel; | |
| 951 | |
| 952 if(first) | |
| 953 { | |
| 954 if(editGasPage.gasID == gasOne) | |
| 955 return UNSPECIFIC_RETURN; | |
| 956 else | |
| 957 { | |
| 958 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 959 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 960 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 961 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 962 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 963 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 964 } | |
| 965 } | |
| 966 | |
| 967 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 968 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 969 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 970 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 1; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
971 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 972 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 973 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 974 | |
| 975 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 976 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 977 tMenuEdit_set_on_off(StMOG_Travel, 1); | |
| 978 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
979 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
980 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
981 #endif |
| 38 | 982 |
| 983 if(!travel) | |
| 984 return UPDATE_DIVESETTINGS; | |
| 985 else | |
| 986 return UPDATE_AND_EXIT_TO_MENU; | |
| 987 } | |
| 988 | |
| 989 | |
| 990 uint8_t OnAction_Inactive(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 991 { | |
| 992 uint8_t first, inactive, gasOne; | |
| 993 | |
| 994 if(editGasPage.ccr) | |
| 995 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 996 else | |
| 997 gasOne = 1; | |
| 998 | |
| 999 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 1000 | |
| 1001 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 1002 inactive = 0; | |
| 1003 else | |
| 1004 inactive = 1; | |
| 1005 | |
| 1006 if(first) | |
| 1007 { | |
| 1008 if(editGasPage.gasID == gasOne) | |
| 1009 return UNSPECIFIC_RETURN; | |
| 1010 else | |
| 1011 { | |
| 1012 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 1013 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 1014 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 1015 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 1016 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 1017 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 1018 } | |
| 1019 } | |
| 1020 | |
| 1021 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 1022 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 1023 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 1024 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1025 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 1026 |
| 1027 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 1028 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 1029 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 1030 tMenuEdit_set_on_off(StMOG_Inactive, 1); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1031 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1032 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1033 #endif |
| 38 | 1034 if(!inactive) |
| 1035 return UPDATE_DIVESETTINGS; | |
| 1036 else | |
| 1037 return UPDATE_AND_EXIT_TO_MENU; | |
| 1038 } | |
| 1039 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1040 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1041 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1042 uint8_t first, off, gasOne; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1043 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1044 if(editGasPage.ccr) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1045 gasOne = 1 + NUM_OFFSET_DILUENT; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1046 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1047 gasOne = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1048 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1049 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1050 off =editGasPage.pGasLine[editGasPage.gasID].note.ub.off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1051 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1052 if(first) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1053 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1054 if(editGasPage.gasID == gasOne) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1055 return UNSPECIFIC_RETURN; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1056 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1057 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1058 editGasPage.pGasLine[gasOne].note.ub.first = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1059 editGasPage.pGasLine[gasOne].note.ub.active = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1060 editGasPage.pGasLine[gasOne].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1061 editGasPage.pGasLine[gasOne].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1062 editGasPage.pGasLine[gasOne].depth_meter = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1063 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1064 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1065 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1066 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1067 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1068 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1069 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1070 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1071 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1072 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1073 tMenuEdit_set_on_off(StMOG_First, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1074 tMenuEdit_set_on_off(StMOG_Deco, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1075 tMenuEdit_set_on_off(StMOG_Travel, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1076 tMenuEdit_set_on_off(StMOG_Inactive, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1077 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1078 tMenuEdit_set_on_off(StMOG_Off, 1); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1079 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1080 if(!off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1081 return UPDATE_DIVESETTINGS; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1082 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1083 return UPDATE_AND_EXIT_TO_MENU; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1084 } |
| 38 | 1085 |
| 1086 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1087 { | |
| 1088 uint8_t newChangeDepth = editGasPage.mod; | |
| 1089 | |
| 1090 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newChangeDepth; | |
| 1091 tMenuEdit_newInput(StMOG_ChangeDepth, unit_depth_integer(newChangeDepth), 0, 0, 0); | |
| 1092 | |
| 1093 return UPDATE_DIVESETTINGS; | |
| 1094 } | |
| 1095 | |
| 1096 | |
| 1097 uint8_t OnAction_ChangeDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1098 { | |
| 1099 uint8_t digitContentNew; | |
| 1100 uint32_t newDepth; | |
| 1101 | |
| 1102 if(action == ACTION_BUTTON_ENTER) | |
| 1103 { | |
| 1104 return digitContent; | |
| 1105 } | |
| 1106 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1107 { | |
| 1108 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 1109 if(settingsGetPointer()->nonMetricalSystem != 0) // new hw 170703 | |
| 1110 { | |
| 1111 newDepth += 2; // f�r rundung | |
| 1112 newDepth = (newDepth * 3) / 10; | |
| 1113 } | |
| 1114 if(newDepth > 255) | |
| 1115 newDepth = 255; | |
| 1116 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 1117 tMenuEdit_newInput(editId, unit_depth_integer(newDepth), 0, 0, 0); | |
| 1118 return UPDATE_DIVESETTINGS; | |
| 1119 } | |
| 1120 if(action == ACTION_BUTTON_NEXT) | |
| 1121 { | |
| 1122 digitContentNew = digitContent + 1; | |
| 1123 if(digitContentNew > '9') | |
| 1124 digitContentNew = '0'; | |
| 1125 return digitContentNew; | |
| 1126 } | |
| 1127 if(action == ACTION_BUTTON_BACK) | |
| 1128 { | |
| 1129 digitContentNew = digitContent - 1; | |
| 1130 if(digitContentNew < '0') | |
| 1131 digitContentNew = '9'; | |
| 1132 return digitContentNew; | |
| 1133 } | |
| 1134 | |
| 1135 return UNSPECIFIC_RETURN; | |
| 1136 } | |
| 1137 | |
| 1138 | |
| 1139 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1140 { | |
| 1141 int8_t digitContentNew; | |
| 1142 uint32_t newBottleSize; | |
| 1143 // const uint8_t validSize = {4,7,8,10,12,15,16,17,20,24,30,40,255}; | |
| 1144 const uint8_t validSize[] = {40,30,24,20,17,16,15,12,10,8,7,4,0}; | |
| 1145 | |
| 1146 if(action == ACTION_BUTTON_ENTER) | |
| 1147 { | |
| 1148 return digitContent; | |
| 1149 } | |
| 1150 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1151 { | |
| 1152 evaluateNewString(editId, &newBottleSize, 0, 0, 0); | |
| 1153 | |
| 1154 if(newBottleSize > validSize[0]) | |
| 1155 newBottleSize = validSize[0]; | |
| 1156 | |
| 1157 editGasPage.pGasLine[editGasPage.gasID].bottle_size_liter = newBottleSize; | |
| 1158 | |
| 1159 tMenuEdit_newInput(editId, newBottleSize, 0, 0, 0); | |
| 1160 return UPDATE_DIVESETTINGS; | |
| 1161 } | |
| 1162 if(action == ACTION_BUTTON_NEXT) | |
| 1163 { | |
| 1164 // new here for ease of comparison | |
| 1165 digitContentNew = digitContent - '0'; | |
| 1166 | |
| 1167 if(digitContentNew > 0) | |
| 1168 { | |
| 1169 int i = 0; | |
| 1170 while(digitContentNew < validSize[i]) | |
| 1171 { | |
| 1172 i++; | |
| 1173 } | |
| 1174 if(i == 0) | |
| 1175 digitContentNew = 0; // off | |
| 1176 else | |
| 1177 digitContentNew = validSize[i-1]; | |
| 1178 } | |
| 1179 else | |
| 1180 { | |
| 1181 int i = 0; | |
| 1182 while(validSize[i] != 0) | |
| 1183 i++; | |
| 1184 digitContentNew = validSize[i-1]; // smallest tank | |
| 1185 } | |
| 1186 digitContentNew += '0'; | |
| 1187 return digitContentNew; | |
| 1188 } | |
| 1189 if(action == ACTION_BUTTON_BACK) | |
| 1190 { | |
| 1191 // new here for ease of comparison | |
| 1192 digitContentNew = digitContent - '0'; | |
| 1193 if(digitContentNew > 0) | |
| 1194 { | |
| 1195 int i = 0; | |
| 1196 while(digitContentNew < validSize[i]) | |
| 1197 { | |
| 1198 i++; | |
| 1199 } | |
| 1200 if(validSize[i] == 0) | |
| 1201 digitContentNew = 0; // off | |
| 1202 else if(validSize[i+1] == 0) | |
| 1203 digitContentNew = 0; // off | |
| 1204 else | |
| 1205 digitContentNew = validSize[i+1]; | |
| 1206 } | |
| 1207 else | |
| 1208 { | |
| 1209 digitContentNew = validSize[0]; | |
| 1210 } | |
| 1211 digitContentNew += '0'; | |
| 1212 | |
| 1213 return digitContentNew; | |
| 1214 } | |
| 1215 return EXIT_TO_MENU; | |
| 1216 } | |
| 1217 | |
| 1218 | |
| 1219 /* Private functions ---------------------------------------------------------*/ | |
| 1220 | |
| 1221 | |
| 1222 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2) | |
| 1223 { | |
| 1224 uint8_t digit1, digit2, digit3, count; | |
| 1225 | |
| 1226 count = 0; | |
| 1227 | |
| 1228 if(*text1) | |
| 1229 { | |
| 1230 strcpy(&text[count], text1); | |
| 1231 count = strlen(text1); | |
| 1232 } | |
| 1233 | |
| 1234 digit1 = inputU8 / 100; | |
| 1235 inputU8 -= digit1 * 100; | |
| 1236 digit2 = inputU8 / 10; | |
| 1237 inputU8 -= digit2 * 10; | |
| 1238 digit3 = inputU8; | |
| 1239 if(digit1) | |
| 1240 text[count++] = '0' + digit1; | |
| 1241 if(count || digit2) | |
| 1242 text[count++] = '0' + digit2; | |
| 1243 text[count++] = '0' + digit3; | |
| 1244 | |
| 1245 if(*text2) | |
| 1246 { | |
| 1247 strcpy(&text[count], text2); | |
| 1248 } | |
| 1249 } |