Mercurial > public > ostc4
annotate Discovery/Src/t3.c @ 754:ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
In the previous version the autodetection was visible even if not supported by hardware. The autodetection will now only be shown if the ADC is available (new HW revision). A future improvment could be to make the decision based on a special HW number which indicates a OSTC4 version with external pin connector.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 07 Mar 2023 19:55:13 +0100 |
| parents | 4a6bffaa38b3 |
| children | 92bf7bf9fb8a |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/t3.c | |
| 5 /// \brief Main Template file for dive mode special scree t3 | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 10-Nov-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "t3.h" | |
| 31 | |
| 32 #include "data_exchange_main.h" | |
| 33 #include "decom.h" | |
| 34 #include "gfx_fonts.h" | |
| 35 #include "math.h" | |
| 36 #include "tHome.h" | |
| 37 #include "timer.h" | |
| 38 #include "unit.h" | |
| 553 | 39 #include "motion.h" |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
40 #include "logbook_miniLive.h" |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
41 |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
42 |
| 599 | 43 #define CV_PROFILE_WIDTH (600U) |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
44 |
|
237
ec16fd26e280
Bugfix: do not show NDL in bigscreen mode when zero
Jan Mulder <jlmulder@xs4all.nl>
parents:
214
diff
changeset
|
45 //* Imported function prototypes ---------------------------------------------*/ |
| 38 | 46 extern uint8_t write_gas(char *text, uint8_t oxygen, uint8_t helium); |
| 47 | |
| 48 /* Exported variables --------------------------------------------------------*/ | |
| 49 | |
| 50 const uint16_t BigFontSeperationLeftRight = 399; | |
| 51 const uint16_t BigFontSeperationTopBottom = 240; | |
| 52 | |
| 53 /* Private variables ---------------------------------------------------------*/ | |
| 54 GFX_DrawCfgScreen t3screen; | |
| 55 GFX_DrawCfgWindow t3l1; | |
| 56 GFX_DrawCfgWindow t3r1; | |
| 57 GFX_DrawCfgWindow t3c1; | |
| 58 GFX_DrawCfgWindow t3c2; | |
| 59 | |
|
529
0e1db77b2aca
Added skip condition in custom view selection:
Ideenmodellierer
parents:
527
diff
changeset
|
60 uint8_t t3_selection_customview = CVIEW_noneOrDebug; |
| 38 | 61 |
| 62 /* TEM HAS TO MOVE TO GLOBAL--------------------------------------------------*/ | |
| 63 | |
| 64 /* Private types -------------------------------------------------------------*/ | |
| 65 #define TEXTSIZE 16 | |
|
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
66 #define NUMBER_OF_VIEWS 7 /* number of views defined in the array below */ |
| 38 | 67 |
| 68 const uint8_t t3_customviewsStandard[] = | |
| 69 { | |
| 70 CVIEW_T3_Decostop, | |
| 71 CVIEW_sensors, | |
| 72 CVIEW_Compass, | |
| 73 CVIEW_T3_MaxDepth, | |
| 74 CVIEW_T3_StopWatch, | |
| 75 CVIEW_T3_TTS, | |
| 76 CVIEW_T3_ppO2andGas, | |
| 518 | 77 CVIEW_T3_GasList, |
| 511 | 78 CVIEW_T3_Navigation, |
| 79 CVIEW_T3_DepthData, | |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
80 CVIEW_noneOrDebug, |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
81 CVIEW_T3_DecoTTS, |
| 599 | 82 #ifdef ENABLE_T3_PROFILE_VIEW |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
83 CVIEW_T3_Profile, |
| 599 | 84 #endif |
| 38 | 85 CVIEW_T3_END |
| 86 }; | |
| 87 | |
| 88 /* Private function prototypes -----------------------------------------------*/ | |
| 89 void t3_refresh_divemode(void); | |
| 90 | |
| 91 uint8_t t3_test_customview_warnings(void); | |
| 92 void t3_refresh_customview(float depth); | |
| 496 | 93 void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, point_t center, uint16_t ActualHeading, uint16_t UserSetHeading); |
| 38 | 94 |
| 95 /* Exported functions --------------------------------------------------------*/ | |
| 96 | |
| 97 void t3_init(void) | |
| 98 { | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
99 SSettings* pSettings; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
100 pSettings = settingsGetPointer(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
101 |
| 496 | 102 t3_selection_customview = t3_customviewsStandard[0]; |
| 38 | 103 |
| 104 t3screen.FBStartAdress = 0; | |
| 105 t3screen.ImageHeight = 480; | |
| 106 t3screen.ImageWidth = 800; | |
| 107 t3screen.LayerIndex = 1; | |
| 108 | |
| 109 t3l1.Image = &t3screen; | |
| 110 t3l1.WindowNumberOfTextLines = 2; | |
| 111 t3l1.WindowLineSpacing = 19; // Abstand von Y0 | |
| 112 t3l1.WindowTab = 100; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
113 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
114 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
115 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
116 t3l1.WindowX0 = 0; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
117 t3l1.WindowX1 = BigFontSeperationLeftRight - 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
118 t3l1.WindowY0 = BigFontSeperationTopBottom + 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
119 t3l1.WindowY1 = 479; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
120 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
121 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
122 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
123 t3l1.WindowX0 = 800 - BigFontSeperationLeftRight + 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
124 t3l1.WindowX1 = 799; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
125 t3l1.WindowY0 = 0; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
126 t3l1.WindowY1 = 479 - BigFontSeperationTopBottom + 5 ; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
127 } |
| 38 | 128 |
| 129 t3r1.Image = &t3screen; | |
| 130 t3r1.WindowNumberOfTextLines = t3l1.WindowNumberOfTextLines; | |
| 131 t3r1.WindowLineSpacing = t3l1.WindowLineSpacing; | |
| 132 t3r1.WindowTab = t3l1.WindowTab; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
133 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
134 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
135 t3r1.WindowX0 = BigFontSeperationLeftRight + 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
136 t3r1.WindowX1 = 799; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
137 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
138 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
139 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
140 t3r1.WindowX0 = 0; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
141 t3r1.WindowX1 = BigFontSeperationLeftRight - 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
142 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
143 |
| 38 | 144 t3r1.WindowY0 = t3l1.WindowY0; |
| 145 t3r1.WindowY1 = t3l1.WindowY1; | |
| 146 | |
| 518 | 147 /* t3c1 is across the complete lower part of the display */ |
| 38 | 148 t3c1.Image = &t3screen; |
| 149 t3c1.WindowNumberOfTextLines = 2; | |
| 518 | 150 t3c1.WindowLineSpacing = 84 + 5; /* double font + spacing */ |
| 38 | 151 t3c1.WindowX0 = 0; |
| 152 t3c1.WindowX1 = 799; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
153 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
154 { |
| 511 | 155 t3c1.WindowY0 = 5; |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
156 t3c1.WindowY1 = BigFontSeperationTopBottom - 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
157 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
158 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
159 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
160 t3c1.WindowY0 = 480 - BigFontSeperationTopBottom + 5; |
| 511 | 161 t3c1.WindowY1 = 479 - 5; |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
162 } |
| 38 | 163 |
| 518 | 164 /* t3c2 is just showing the lower right part of the display */ |
| 38 | 165 t3c2.Image = &t3screen; |
| 166 t3c2.WindowNumberOfTextLines = 3; | |
| 511 | 167 t3c2.WindowLineSpacing = t3c1.WindowLineSpacing ; |
| 38 | 168 t3c2.WindowX0 = 370; |
| 169 t3c2.WindowX1 = 799; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
170 t3c2.WindowY0 = t3c1.WindowY0; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
171 t3c2.WindowY1 = t3c1.WindowY1; |
| 38 | 172 t3c2.WindowTab = 600; |
| 173 } | |
| 174 | |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
175 void t3_select_customview(uint8_t selectedCustomview) |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
176 { |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
177 if(selectedCustomview < CVIEW_T3_END) |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
178 { |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
179 t3_selection_customview = selectedCustomview; |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
180 } |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
181 } |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
182 |
| 610 | 183 void t3_drawMarker(GFX_DrawCfgScreen *hgfx, const SWindowGimpStyle *window, uint8_t *data, uint16_t datalength, uint8_t color) |
| 184 { | |
| 185 uint16_t line = 0; | |
| 186 uint16_t dataIndex = 0; | |
| 187 uint16_t lastDataIndex = 0; | |
| 188 uint16_t windowWidth = 0; | |
| 189 int16_t factor = 0; | |
| 190 uint8_t setMarker = 0; | |
| 191 | |
| 192 point_t start; | |
| 193 point_t stop; | |
| 194 | |
| 195 | |
| 196 if( (window->bottom <= 479) | |
| 197 && (window->top <= 479) | |
| 198 && (window->right <= 799) | |
| 199 && (window->left <= 799) | |
| 200 && (window->right >= 0) | |
| 201 && (window->left >= 0) | |
| 202 && (window->bottom > window->top) | |
| 203 && (window->right > window->left)) | |
| 204 { | |
| 205 windowWidth = window->right - window->left; | |
| 206 | |
|
624
930f1bbe0ac2
Development bugfix: Marker in standard t3 view drawn in wrong direction
Ideenmodellierer
parents:
622
diff
changeset
|
207 start.y = 479 - BigFontSeperationTopBottom - 5; |
|
930f1bbe0ac2
Development bugfix: Marker in standard t3 view drawn in wrong direction
Ideenmodellierer
parents:
622
diff
changeset
|
208 stop.y =5; |
|
930f1bbe0ac2
Development bugfix: Marker in standard t3 view drawn in wrong direction
Ideenmodellierer
parents:
622
diff
changeset
|
209 |
| 610 | 210 while((line <= windowWidth) && (dataIndex < datalength)) |
| 211 { | |
| 212 factor = (10 * line * (long)datalength)/windowWidth; | |
| 213 dataIndex = factor/10; | |
| 214 /* check if a marker is set in the intervall which is bypassed because of data reduction */ | |
| 215 setMarker = 0; | |
| 216 while(lastDataIndex <= dataIndex) | |
| 217 { | |
| 218 lastDataIndex++; | |
| 219 if(data[lastDataIndex] != 0) | |
| 220 { | |
| 221 setMarker = 1; | |
| 222 break; | |
| 223 } | |
| 224 } | |
| 225 lastDataIndex = dataIndex; | |
| 226 int rest = factor - dataIndex*10; | |
| 227 if(rest >= 5) | |
| 228 dataIndex++; | |
| 229 | |
| 230 if((datalength - 1) < dataIndex) | |
| 231 dataIndex = datalength-1; | |
| 232 | |
| 233 if((line > 0) && (setMarker)) /* draw marker line */ | |
| 234 { | |
| 235 start.x = line; | |
| 236 stop.x = line; | |
| 237 GFX_draw_line(hgfx, start, stop, color); | |
| 238 } | |
| 239 line++; | |
| 240 dataIndex++; | |
| 241 } | |
| 242 } | |
| 243 } | |
| 244 | |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
245 void t3_miniLiveLogProfile(void) |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
246 { |
|
641
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
247 static uint8_t wasDecoDive = 0; |
|
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
248 |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
249 SWindowGimpStyle wintemp; |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
250 uint16_t replayDataLength = 0; |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
251 uint16_t liveDataLength = 0; |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
252 uint16_t drawDataLength = 0; |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
253 uint16_t* pReplayData; |
| 610 | 254 uint8_t* pReplayMarker; |
| 599 | 255 uint16_t max_depth = 10; |
| 256 char text[TEXTSIZE]; | |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
257 point_t start, stop; |
| 599 | 258 uint16_t diveMinutes = 0; |
| 622 | 259 const SDecoinfo * pDecoinfo; |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
260 |
| 622 | 261 SSettings* pSettings; |
| 262 pSettings = settingsGetPointer(); | |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
263 |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
264 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
265 { |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
266 pDecoinfo = &stateUsed->decolistBuehlmann; |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
267 } |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
268 else |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
269 { |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
270 pDecoinfo = &stateUsed->decolistVPM; |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
271 } |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
272 |
| 622 | 273 wintemp.top = 479 - BigFontSeperationTopBottom + 5; |
| 599 | 274 wintemp.bottom = 479 - 5; |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
275 |
| 622 | 276 if(!pSettings->FlipDisplay) |
| 277 { | |
| 278 wintemp.left = t3c1.WindowX0; | |
| 279 wintemp.right = t3c1.WindowX0 + CV_PROFILE_WIDTH; | |
| 280 } | |
| 281 else | |
| 282 { | |
| 283 wintemp.left = t3c1.WindowX1 - CV_PROFILE_WIDTH;; | |
| 284 wintemp.right = t3c1.WindowX1; | |
| 285 } | |
| 286 | |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
287 start.x = CV_PROFILE_WIDTH + 2; |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
288 stop.x = start.x; |
| 622 | 289 start.y = 479 - BigFontSeperationTopBottom - 5; |
| 290 stop.y =5; | |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
291 |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
292 GFX_draw_line(&t3screen, start, stop, CLUT_Font020); |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
293 |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
294 if(getReplayOffset() != 0xFFFF) |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
295 { |
| 610 | 296 getReplayInfo(&pReplayData, &pReplayMarker, &replayDataLength, &max_depth, &diveMinutes); |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
297 } |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
298 |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
299 if(max_depth < (uint16_t)(stateUsed->lifeData.max_depth_meter * 100)) |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
300 { |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
301 max_depth = (uint16_t)(stateUsed->lifeData.max_depth_meter * 100); |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
302 } |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
303 |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
304 liveDataLength = getMiniLiveReplayLength(); |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
305 |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
306 if(replayDataLength > liveDataLength) |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
307 { |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
308 drawDataLength = replayDataLength; |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
309 } |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
310 else |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
311 { |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
312 drawDataLength = liveDataLength; |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
313 } |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
314 |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
315 if(drawDataLength < CV_PROFILE_WIDTH) |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
316 { |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
317 drawDataLength = CV_PROFILE_WIDTH; |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
318 } |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
319 |
| 599 | 320 if(diveMinutes != 0) |
| 321 { | |
| 322 snprintf(text,TEXTSIZE,"\002%dmin",diveMinutes); | |
| 323 GFX_write_string(&FontT42,&t3c1,text,1); | |
| 324 } | |
| 325 | |
| 326 snprintf(text,TEXTSIZE,"\002%01.1fm", max_depth / 100.0); | |
| 327 GFX_write_string(&FontT42,&t3c1,text,0); | |
| 328 | |
|
641
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
329 if(getMiniLiveReplayLength() < 10) /* new dive startet => reset the visualization state for deco data */ |
|
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
330 { |
|
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
331 wasDecoDive = 0; |
|
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
332 } |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
333 |
|
641
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
334 if((pDecoinfo->output_time_to_surface_seconds) || (wasDecoDive)) /* draw deco data first => will be overlayed by all other informations */ |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
335 { |
|
641
ed5422ac4ffb
Development Bugfix Deco bars not shown after last deco stop passed:
Ideenmodellierer
parents:
633
diff
changeset
|
336 wasDecoDive = 1; |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
337 GFX_graph_print(&t3screen,&wintemp,wintemp.top * -1,1,0,max_depth, getMiniLiveDecoPointerToData(),drawDataLength, CLUT_NiceGreen, NULL); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
338 } |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
339 |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
340 if(replayDataLength != 0) |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
341 { |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
342 GFX_graph_print(&t3screen, &wintemp, 0,1,0, max_depth, pReplayData, drawDataLength, CLUT_Font031, NULL); |
| 610 | 343 if(pReplayMarker[0] != 0xFF) |
| 344 { | |
| 345 t3_drawMarker(&t3screen, &wintemp, pReplayMarker, drawDataLength, CLUT_CompassUserHeadingTick); | |
| 346 } | |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
347 } |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
348 |
|
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
349 if(liveDataLength > 3) |
| 599 | 350 { |
|
602
2cb0a97a07ad
Added replay data scaling in case life data is longer than replay block
Ideenmodellierer
parents:
601
diff
changeset
|
351 GFX_graph_print(&t3screen, &wintemp, 0,1,0, max_depth, getMiniLiveReplayPointerToData(), drawDataLength, CLUT_Font030, NULL); |
| 599 | 352 } |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
353 } |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
354 |
| 38 | 355 |
| 356 void t3_refresh(void) | |
| 357 { | |
| 496 | 358 static uint8_t last_mode = MODE_SURFACE; |
| 359 | |
| 38 | 360 SStateList status; |
| 361 get_globalStateList(&status); | |
| 362 | |
| 363 if(stateUsed->mode != MODE_DIVE) | |
| 364 { | |
| 365 settingsGetPointer()->design = 7; | |
| 366 return; | |
| 367 } | |
| 368 | |
| 369 if(status.base != BaseHome) | |
| 370 return; | |
| 371 | |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
372 if(last_mode != MODE_DIVE) /* Select custom view */ |
| 496 | 373 { |
| 374 if((settingsGetPointer()->tX_customViewTimeout == 0) && (settingsGetPointer()->showDebugInfo)) | |
| 375 { | |
| 376 t3_selection_customview = CVIEW_noneOrDebug; | |
| 377 } | |
| 378 else | |
| 379 { | |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
380 t3_selection_customview = settingsGetPointer()->tX_customViewPrimaryBF; |
| 496 | 381 } |
| 382 t3_change_customview(ACTION_END); | |
| 383 } | |
| 38 | 384 t3screen.FBStartAdress = getFrame(24); |
| 385 t3_refresh_divemode(); | |
|
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
386 GFX_SetFramesTopBottom(t3screen.FBStartAdress, 0,480); |
| 38 | 387 releaseAllFramesExcept(24,t3screen.FBStartAdress); |
| 496 | 388 last_mode = stateUsed->mode; |
| 38 | 389 } |
| 390 | |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
391 void t3_set_customview_to_primary(void) |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
392 { |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
393 if(stateUsed->mode == MODE_DIVE) |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
394 { |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
395 t3_selection_customview = settingsGetPointer()->tX_customViewPrimaryBF; |
| 599 | 396 t3_change_customview(ACTION_END); |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
397 } |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
398 } |
| 38 | 399 |
| 400 /* Private functions ---------------------------------------------------------*/ | |
| 401 | |
| 402 float t3_basics_lines_depth_and_divetime(GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXl1, GFX_DrawCfgWindow* tXr1, uint8_t mode) | |
| 403 { | |
| 518 | 404 char text[256]; |
| 405 uint8_t textPointer; | |
| 38 | 406 uint8_t color; |
| 407 uint8_t depthChangeRate; | |
| 408 uint8_t depthChangeAscent; | |
| 409 point_t start, stop, startZeroLine; | |
| 518 | 410 SDivetime Divetime = {0,0,0,0}; |
| 38 | 411 |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
412 SSettings* pSettings; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
413 pSettings = settingsGetPointer(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
414 |
| 38 | 415 start.x = 0; |
| 416 stop.x = 799; | |
| 417 stop.y = start.y = BigFontSeperationTopBottom; | |
|
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
641
diff
changeset
|
418 if((viewInFocus()) && (!viewDetectionSuspended())) |
| 553 | 419 { |
| 420 GFX_draw_line(tXscreen, start, stop, CLUT_Font023); | |
| 421 } | |
| 422 else | |
| 423 { | |
| 424 GFX_draw_line(tXscreen, start, stop, CLUT_Font020); | |
| 425 } | |
| 426 | |
| 38 | 427 |
| 428 start.y = BigFontSeperationTopBottom; | |
| 429 stop.y = 479; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
430 |
| 38 | 431 stop.x = start.x = BigFontSeperationLeftRight; |
|
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
641
diff
changeset
|
432 if((viewInFocus() && (!viewDetectionSuspended()))) |
| 553 | 433 { |
| 434 GFX_draw_line(tXscreen, start, stop, CLUT_Font023); | |
| 435 } | |
| 436 else | |
| 437 { | |
| 438 GFX_draw_line(tXscreen, start, stop, CLUT_Font020); | |
| 439 } | |
| 38 | 440 |
| 441 /* depth */ | |
|
174
ecb71521d004
Bugfix: make max depth move with current depth (part 2)
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
442 float depth = unit_depth_float(stateUsed->lifeData.depth_meter); |
| 38 | 443 |
| 444 if(depth <= 0.3f) | |
| 445 depth = 0; | |
| 446 | |
| 447 if(settingsGetPointer()->nonMetricalSystem) | |
| 448 snprintf(text,TEXTSIZE,"\032\f[feet]"); | |
| 449 else | |
| 450 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Depth); | |
| 451 GFX_write_string(&FontT42,tXl1,text,0); | |
| 452 | |
| 453 if( ((mode == DIVEMODE_Apnea) && ((stateUsed->lifeData.ascent_rate_meter_per_min > 4) || (stateUsed->lifeData.ascent_rate_meter_per_min < -4 ))) | |
| 454 || ((mode != DIVEMODE_Apnea) && ((stateUsed->lifeData.ascent_rate_meter_per_min > 8) || (stateUsed->lifeData.ascent_rate_meter_per_min < -10))) | |
| 455 ) | |
| 456 { | |
| 457 snprintf(text,TEXTSIZE,"\f\002%.0f %c%c/min " | |
| 458 , unit_depth_float(stateUsed->lifeData.ascent_rate_meter_per_min) | |
| 459 , unit_depth_char1() | |
| 460 , unit_depth_char2() | |
| 461 ); | |
| 462 GFX_write_string(&FontT42,tXl1,text,0); | |
| 463 } | |
| 464 | |
| 465 if( depth < 100) | |
| 466 snprintf(text,TEXTSIZE,"\020\003\016%01.1f",depth); | |
| 467 else | |
| 468 snprintf(text,TEXTSIZE,"\020\003\016%01.0f",depth); | |
| 469 | |
| 470 t3_basics_colorscheme_mod(text); | |
| 471 GFX_write_string(&FontT105,tXl1,text,1); | |
| 472 | |
| 473 | |
| 474 /* ascentrate graph */ | |
| 475 if(mode == DIVEMODE_Apnea) | |
| 476 { | |
| 477 /* ascentrate graph - apnea mode */ | |
| 478 if(stateUsed->lifeData.ascent_rate_meter_per_min > 0) | |
| 479 { | |
| 480 depthChangeAscent = 1; | |
| 481 if(stateUsed->lifeData.ascent_rate_meter_per_min < 200) | |
| 482 depthChangeRate = (uint8_t)stateUsed->lifeData.ascent_rate_meter_per_min; | |
| 483 else | |
| 484 depthChangeRate = 200; | |
| 485 } | |
| 486 else | |
| 487 { | |
| 488 depthChangeAscent = 0; | |
| 489 if(stateUsed->lifeData.ascent_rate_meter_per_min > -200) | |
| 490 depthChangeRate = (uint8_t)(0 - stateUsed->lifeData.ascent_rate_meter_per_min); | |
| 491 else | |
| 492 depthChangeRate = 200; | |
| 493 } | |
| 413 | 494 |
| 495 if(!pSettings->FlipDisplay) | |
| 496 { | |
| 497 start.y = tXl1->WindowY0 - 1; | |
| 498 } | |
| 499 else | |
| 500 { | |
| 501 start.y = tXl1->WindowY1 + 1; | |
| 502 } | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
503 startZeroLine.y = start.y; |
| 38 | 504 for(int i = 0; i<5;i++) |
| 505 { | |
| 506 start.y += 40; | |
| 507 stop.y = start.y; | |
| 413 | 508 if(!pSettings->FlipDisplay) |
| 509 { | |
| 510 start.x = tXl1->WindowX1 - 1; | |
| 511 } | |
| 512 else | |
| 513 { | |
| 514 start.x = tXr1->WindowX1 - 1; | |
| 515 } | |
| 38 | 516 stop.x = start.x - 17; |
| 517 | |
| 518 if(depthChangeRate <= 6) | |
| 519 { | |
| 520 if(i == 2) | |
| 521 { | |
| 522 startZeroLine.y = start.y; | |
| 523 stop.x = start.x - 34; | |
| 524 } | |
| 525 } | |
| 526 else | |
| 527 { | |
| 528 if(((i == 1) && depthChangeAscent) || ((i == 3) && !depthChangeAscent)) | |
| 529 { | |
| 530 startZeroLine.y = start.y; | |
| 531 stop.x = start.x - 34; | |
| 532 } | |
| 533 } | |
| 534 GFX_draw_line(tXscreen, start, stop, 0); | |
| 535 } | |
| 536 // new thick bar design Sept. 2015 | |
| 537 if((stateUsed->lifeData.ascent_rate_meter_per_min > 4) || (stateUsed->lifeData.ascent_rate_meter_per_min < -4)) | |
| 538 { | |
| 539 start.y = startZeroLine.y; | |
| 540 if(depthChangeAscent) | |
| 541 { | |
| 542 color = CLUT_EverythingOkayGreen; | |
| 543 start.y += 7; // starte etwas weiter oben | |
| 544 stop.y = start.y + (uint16_t)(depthChangeRate * 4) - 9; // - x; // wegen der Liniendicke | |
| 545 if(stop.y > 475) | |
| 546 stop.y = 475; | |
| 547 } | |
| 548 else | |
| 549 { | |
| 550 color = CLUT_Font023; | |
| 551 start.y -= 7; | |
| 552 stop.y = start.y - (uint16_t)(depthChangeRate * 4) + 9; | |
| 553 if(stop.y <= tXl1->WindowY0) | |
| 554 stop.y = tXl1->WindowY0 + 1; | |
| 555 } | |
| 413 | 556 if(!pSettings->FlipDisplay) |
| 557 { | |
| 558 start.x = tXl1->WindowX1 - 3 - 5; | |
| 559 } | |
| 560 else | |
| 561 { | |
| 562 start.x = tXr1->WindowX1 - 3 - 5; | |
| 563 } | |
| 564 | |
| 565 stop.x = start.x; | |
| 38 | 566 GFX_draw_thick_line(12,tXscreen, start, stop, color); |
| 567 } | |
| 568 } | |
| 569 else | |
| 570 { | |
| 571 /* ascentrate graph -standard mode */ | |
| 572 if(stateUsed->lifeData.ascent_rate_meter_per_min > 0) | |
| 573 { | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
574 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
575 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
576 start.y = tXl1->WindowY0 - 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
577 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
578 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
579 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
580 start.y = tXl1->WindowY1 + 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
581 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
582 |
| 38 | 583 for(int i = 0; i<4;i++) |
| 584 { | |
| 585 start.y += 5*8; | |
| 586 stop.y = start.y; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
587 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
588 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
589 start.x = tXl1->WindowX1 - 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
590 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
591 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
592 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
593 start.x = tXr1->WindowX1 - 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
594 } |
| 38 | 595 stop.x = start.x - 17; |
| 596 GFX_draw_line(tXscreen, start, stop, 0); | |
| 597 } | |
| 598 // new thick bar design Sept. 2015 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
599 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
600 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
601 start.x = tXl1->WindowX1 - 3 - 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
602 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
603 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
604 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
605 start.x = tXr1->WindowX1 - 3 - 5; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
606 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
607 |
| 38 | 608 stop.x = start.x; |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
609 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
610 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
611 start.y = tXl1->WindowY0 - 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
612 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
613 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
614 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
615 start.y = tXl1->WindowY1 + 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
616 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
617 |
| 38 | 618 stop.y = start.y + (uint16_t)(stateUsed->lifeData.ascent_rate_meter_per_min * 8); |
| 619 stop.y -= 3; // wegen der Liniendicke von 12 anstelle von 9 | |
| 620 if(stop.y >= 470) | |
| 621 stop.y = 470; | |
| 622 start.y += 7; // starte etwas weiter oben | |
| 623 if(stateUsed->lifeData.ascent_rate_meter_per_min <= 10) | |
| 624 color = CLUT_EverythingOkayGreen; | |
| 625 else | |
| 626 if(stateUsed->lifeData.ascent_rate_meter_per_min <= 15) | |
| 627 color = CLUT_WarningYellow; | |
| 628 else | |
| 629 color = CLUT_WarningRed; | |
| 630 | |
| 631 GFX_draw_thick_line(12,tXscreen, start, stop, color); | |
| 632 } | |
| 633 } | |
| 634 | |
| 635 // divetime | |
| 636 if(mode == DIVEMODE_Apnea) | |
| 637 { | |
| 638 if(stateUsed->lifeData.counterSecondsShallowDepth) | |
| 639 { | |
| 640 SDivetime SurfaceBreakTime = {0,0,0,0}; | |
| 641 | |
| 642 SurfaceBreakTime.Total = stateUsed->lifeData.counterSecondsShallowDepth; | |
| 643 SurfaceBreakTime.Minutes = SurfaceBreakTime.Total / 60; | |
| 644 SurfaceBreakTime.Seconds = SurfaceBreakTime.Total - (SurfaceBreakTime.Minutes * 60); | |
| 645 | |
| 646 snprintf(text,TEXTSIZE,"\032\f\002%c%c", TXT_2BYTE,TXT2BYTE_ApneaSurface); | |
| 647 GFX_write_string(&FontT42,tXr1,text,0); | |
| 648 | |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
649 snprintf(text,TEXTSIZE,"\020\003\002\016%u:%02u",SurfaceBreakTime.Minutes, SurfaceBreakTime.Seconds); |
| 38 | 650 } |
| 651 else | |
| 652 { | |
| 653 Divetime.Total = stateUsed->lifeData.dive_time_seconds; | |
| 654 Divetime.Minutes = Divetime.Total / 60; | |
| 655 Divetime.Seconds = Divetime.Total - ( Divetime.Minutes * 60 ); | |
| 656 | |
| 657 snprintf(text,TEXTSIZE,"\032\f\002%c",TXT_Divetime); | |
| 658 GFX_write_string(&FontT42,tXr1,text,0); | |
| 659 | |
| 660 if(Divetime.Minutes < 100) | |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
661 snprintf(text,TEXTSIZE,"\020\003\002\016%u:%02u",Divetime.Minutes, Divetime.Seconds); |
| 38 | 662 else |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
663 snprintf(text,TEXTSIZE,"\020\003\002\016%u'",Divetime.Minutes); |
| 38 | 664 } |
| 518 | 665 t3_basics_colorscheme_mod(text); |
| 666 GFX_write_string(&FontT105,tXr1,text,1); | |
| 38 | 667 } |
| 668 else | |
| 669 { | |
| 518 | 670 switch(get_globalState()) |
| 671 { | |
| 739 | 672 case StDMENU: snprintf(text,TEXTSIZE,"\a\003\001%c%c", TXT_2BYTE, TXT2BYTE_DiveMenuQ); |
| 673 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); | |
| 674 break; | |
| 518 | 675 case StDBEAR: snprintf(text,TEXTSIZE,"\a\003\001%c%c", TXT_2BYTE, TXT2BYTE_DiveBearingQ); |
| 676 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); | |
| 677 break; | |
| 678 case StDRAVG: snprintf(text,TEXTSIZE,"\a\003\001%c%c", TXT_2BYTE, TXT2BYTE_DiveResetAvgQ); | |
| 679 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); | |
| 680 break; | |
| 38 | 681 |
| 518 | 682 case StDMGAS: |
| 683 textPointer = 0; | |
| 684 text[textPointer++] = '\a'; | |
| 685 text[textPointer++] = '\001'; | |
| 686 text[textPointer++] = ' '; | |
| 687 textPointer += tHome_gas_writer(stateUsed->diveSettings.gas[actualBetterGasId()].oxygen_percentage,stateUsed->diveSettings.gas[actualBetterGasId()].helium_percentage,&text[textPointer]); | |
| 688 text[textPointer++] = '?'; | |
| 689 text[textPointer++] = ' '; | |
| 690 text[textPointer++] = 0; | |
| 691 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); | |
| 692 break; | |
| 613 | 693 |
| 694 case StDMARK: snprintf(text,TEXTSIZE,"\a\003\001%c%c", TXT_2BYTE, TXT2BYTE_SetMarkerShort); | |
| 695 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); | |
| 696 break; | |
| 697 | |
|
619
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
698 case StDCHECK: snprintf(text,TEXTSIZE,"\a\003\001%c%c", TXT_2BYTE, TXT2BYTE_CheckMarker); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
699 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
700 break; |
|
8fa2de4414a8
Added t3 quick menu for marker synchronisation:
Ideenmodellierer
parents:
613
diff
changeset
|
701 |
|
633
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
702 #ifdef ENABLE_T3_PPO_SIM |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
703 case StDSIM1: snprintf(text,TEXTSIZE,"\a\003\001PPO S0 +"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
704 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
705 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
706 case StDSIM2: snprintf(text,TEXTSIZE,"\a\003\001PPO S0 -"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
707 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
708 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
709 case StDSIM3: snprintf(text,TEXTSIZE,"\a\003\001PPO S1 +"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
710 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
711 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
712 case StDSIM4: snprintf(text,TEXTSIZE,"\a\003\001PPO S1 -"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
713 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
714 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
715 case StDSIM5: snprintf(text,TEXTSIZE,"\a\003\001PPO S2 +"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
716 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
717 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
718 case StDSIM6: snprintf(text,TEXTSIZE,"\a\003\001PPO S2 -"); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
719 GFX_write_string_color(&FontT42,tXr1,text,1,CLUT_WarningYellow); |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
720 break; |
|
68d95049f11a
Added menu structure to allow ppo2 modification in simulator mode:
Ideenmodellierer
parents:
624
diff
changeset
|
721 #endif |
| 518 | 722 default: /* show divetime */ |
| 38 | 723 |
| 518 | 724 Divetime.Total = stateUsed->lifeData.dive_time_seconds_without_surface_time; |
| 725 Divetime.Minutes = Divetime.Total / 60; | |
| 726 Divetime.Seconds = Divetime.Total - ( Divetime.Minutes * 60 ); | |
| 727 | |
| 728 snprintf(text,TEXTSIZE,"\032\f\002%c",TXT_Divetime); | |
| 729 GFX_write_string(&FontT42,tXr1,text,0); | |
| 730 | |
| 731 if(Divetime.Minutes < 100) | |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
732 snprintf(text,TEXTSIZE,"\020\003\002\016%u:%02u",Divetime.Minutes, Divetime.Seconds); |
| 518 | 733 else |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
734 snprintf(text,TEXTSIZE,"\020\003\002\016%u'",Divetime.Minutes); |
| 518 | 735 |
| 736 t3_basics_colorscheme_mod(text); | |
| 737 GFX_write_string(&FontT105,tXr1,text,1); | |
| 738 break; | |
| 739 } | |
| 38 | 740 } |
| 741 | |
| 742 return depth; | |
| 743 } | |
| 744 | |
| 745 | |
| 746 void t3_refresh_divemode(void) | |
| 747 { | |
| 748 uint8_t customview_warnings = 0; | |
| 749 float depth_meter = 0.0; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
750 |
| 38 | 751 // everything like lines, depth, ascent graph and divetime |
| 752 depth_meter = t3_basics_lines_depth_and_divetime(&t3screen, &t3l1, &t3r1, 0); // 0 could be stateUsed->diveSettings.diveMode for CCR specials | |
| 753 | |
| 754 // customview | |
| 755 if(stateUsed->warnings.numWarnings) | |
| 756 customview_warnings = t3_test_customview_warnings(); | |
| 757 | |
| 758 if(customview_warnings && warning_count_high_time) | |
| 759 t3_basics_show_customview_warnings(&t3c1); | |
| 760 else | |
| 761 t3_refresh_customview(depth_meter); | |
| 762 | |
| 763 if(stateUsed->warnings.lowBattery) | |
| 496 | 764 t3_basics_battery_low_customview_extra(&t3r1); //t3c1); |
| 38 | 765 } |
| 766 | |
| 767 | |
| 768 void t3_basics_battery_low_customview_extra(GFX_DrawCfgWindow* tXc1) | |
| 769 { | |
| 770 char TextC1[256]; | |
| 771 | |
| 496 | 772 TextC1[0] = ' ';//'\002'; |
| 38 | 773 TextC1[1] = '\f'; |
| 774 TextC1[2] = '\025'; | |
| 775 TextC1[3] = '3'; | |
| 776 TextC1[4] = '1'; | |
| 777 TextC1[5] = '1'; | |
| 778 TextC1[6] = '1'; | |
| 779 TextC1[7] = '1'; | |
| 780 TextC1[8] = '1'; | |
| 781 TextC1[9] = '1'; | |
| 782 TextC1[10] = '1'; | |
| 783 TextC1[11] = '1'; | |
| 784 TextC1[12] = '1'; | |
| 785 TextC1[13] = '1'; | |
| 786 TextC1[14] = '0'; | |
| 787 TextC1[15] = 0; | |
| 788 | |
| 789 if(!warning_count_high_time) | |
| 790 TextC1[4] = '2'; | |
| 791 | |
| 792 GFX_write_string(&Batt24,tXc1,TextC1,0); | |
| 793 } | |
| 794 | |
| 795 | |
| 796 | |
| 797 void t3_refresh_customview(float depth) | |
| 798 { | |
|
272
74a8296a2318
cleanup: simplify stateUsed usage
Jan Mulder <jlmulder@xs4all.nl>
parents:
237
diff
changeset
|
799 t3_basics_refresh_customview(depth, t3_selection_customview, &t3screen, &t3c1, &t3c2, stateUsedWrite->diveSettings.diveMode); |
| 38 | 800 } |
| 801 | |
| 802 | |
| 803 void t3_basics_refresh_apnoeRight(float depth, uint8_t tX_selection_customview, GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXc1, GFX_DrawCfgWindow* tXc2, uint8_t mode) | |
| 804 { | |
| 722 | 805 char text[30]; |
| 38 | 806 uint16_t textpointer = 0; |
| 807 | |
| 808 // CVIEW_T3_Temperature | |
| 809 float temperature; | |
| 413 | 810 SSettings* pSettings; |
| 811 pSettings = settingsGetPointer(); | |
| 38 | 812 |
| 813 SDivetime TotalDivetime = {0,0,0,0}; | |
| 814 SDivetime LastDivetime = {0,0,0,0}; | |
| 815 | |
| 816 uint16_t tempWinX0; | |
| 413 | 817 uint16_t tempWinX1; |
| 38 | 818 uint16_t tempWinY0; |
| 413 | 819 uint16_t tempWinY1; |
| 38 | 820 |
| 821 tempWinX0 = tXc1->WindowX0; | |
| 413 | 822 tempWinX1 = tXc1->WindowX1; |
| 38 | 823 tempWinY0 = tXc1->WindowY0; |
| 413 | 824 tempWinY1 = tXc1->WindowY1; |
| 38 | 825 |
| 826 tXc1->WindowX0 = 440; // rechte Seite | |
| 827 | |
| 828 switch(tX_selection_customview) | |
| 829 { | |
| 830 case CVIEW_T3_Temperature: | |
| 831 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Temperature); | |
| 832 GFX_write_string(&FontT42,tXc1,text,0); | |
| 833 | |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
174
diff
changeset
|
834 temperature = unit_temperature_float(stateUsed->lifeData.temperature_celsius); |
| 38 | 835 textpointer = snprintf(text,TEXTSIZE,"\020\003\016%01.0f\016\016\140",temperature); // "\016\016%01.1f `" + C or F |
| 836 if(settingsGetPointer()->nonMetricalSystem == 0) | |
| 837 text[textpointer++] = 'C'; | |
| 838 else | |
| 839 text[textpointer++] = 'F'; | |
| 840 text[textpointer++] = 0; | |
| 841 t3_basics_colorscheme_mod(text); | |
| 842 GFX_write_string(&FontT105,tXc1,text,1); | |
| 843 break; | |
| 844 | |
| 845 case CVIEW_T3_ApnoeSurfaceInfo: | |
| 846 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Divetime); | |
| 847 GFX_write_string(&FontT42,tXc1,text,0); | |
| 848 | |
| 849 TotalDivetime.Total = stateUsed->lifeData.dive_time_seconds_without_surface_time; | |
| 850 TotalDivetime.Minutes = TotalDivetime.Total / 60; | |
| 851 TotalDivetime.Seconds = TotalDivetime.Total - ( TotalDivetime.Minutes * 60 ); | |
| 852 | |
| 853 LastDivetime.Total = stateUsed->lifeData.apnea_last_dive_time_seconds; | |
| 854 LastDivetime.Minutes = LastDivetime.Total / 60; | |
| 855 LastDivetime.Seconds = LastDivetime.Total - ( LastDivetime.Minutes * 60 ); | |
| 856 | |
| 413 | 857 // tXc1->WindowY0 = 100; // obere Zeile |
| 858 if(!pSettings->FlipDisplay) | |
| 859 { | |
| 860 tXc1->WindowY0 = 100; | |
| 861 } | |
| 862 else | |
| 863 { | |
| 864 tXc1->WindowY1 -= 100; /* jump to upper of two lines */ | |
| 865 } | |
| 38 | 866 |
| 867 snprintf(text,TEXTSIZE,"\020\016%u:%02u",LastDivetime.Minutes, LastDivetime.Seconds); | |
| 868 t3_basics_colorscheme_mod(text); | |
| 869 GFX_write_string(&FontT105,tXc1,text,0); | |
| 870 | |
| 413 | 871 if(pSettings->FlipDisplay) |
| 872 { | |
| 873 tXc1->WindowX0 = 0; | |
| 874 | |
| 875 } | |
| 38 | 876 snprintf(text,TEXTSIZE,"\032\002%c%c",TXT_2BYTE, TXT2BYTE_ApneaLast); |
| 877 GFX_write_string(&FontT42,tXc1,text,0); | |
| 878 | |
| 413 | 879 if(!pSettings->FlipDisplay) |
| 880 { | |
| 881 tXc1->WindowY0 = tempWinY0; | |
| 882 } | |
| 883 else | |
| 884 { | |
| 885 tXc1->WindowX1 = tempWinX1; | |
| 886 tXc1->WindowY1 = tempWinY1; /* jump to upper of two lines */ | |
| 887 } | |
| 38 | 888 |
| 889 snprintf(text,TEXTSIZE,"\020\016%u:%02u",TotalDivetime.Minutes, TotalDivetime.Seconds); | |
| 890 t3_basics_colorscheme_mod(text); | |
| 891 GFX_write_string(&FontT105,tXc1,text,0); | |
| 892 | |
| 893 snprintf(text,TEXTSIZE,"\032\002%c%c",TXT_2BYTE, TXT2BYTE_ApneaTotal); | |
| 413 | 894 if(pSettings->FlipDisplay) |
| 895 { | |
| 896 tXc1->WindowX0 = 0; | |
| 897 | |
| 898 } | |
| 38 | 899 GFX_write_string(&FontT42,tXc1,text,0); |
| 900 break; | |
| 901 } | |
| 902 | |
| 903 tXc1->WindowX0 = tempWinX0; | |
| 413 | 904 tXc1->WindowX1 = tempWinX1; |
| 38 | 905 tXc1->WindowY0 = tempWinY0; |
| 906 | |
| 907 } | |
| 908 | |
| 909 | |
| 910 void t3_basics_refresh_customview(float depth, uint8_t tX_selection_customview, GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXc1, GFX_DrawCfgWindow* tXc2, uint8_t mode) | |
| 911 { | |
|
582
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
912 static uint8_t last_customview = CVIEW_END; |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
913 |
| 722 | 914 char text[30]; |
| 38 | 915 uint16_t textpointer = 0; |
| 916 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
917 SSettings* pSettings; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
918 pSettings = settingsGetPointer(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
919 |
| 38 | 920 // CVIEW_T3_Decostop and CVIEW_T3_TTS |
| 921 const SDecoinfo * pDecoinfo; | |
| 922 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 923 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 924 else | |
| 925 pDecoinfo = &stateUsed->decolistVPM; | |
| 926 | |
| 927 // CVIEW_T3_Decostop | |
| 928 uint16_t nextstopLengthSeconds = 0; | |
| 929 uint8_t nextstopDepthMeter = 0; | |
| 930 SDivetime SafetyStopTime = {0,0,0,0}; | |
| 931 | |
| 932 // CVIEW_T3_ppO2andGas | |
| 933 uint8_t oxygen_percentage = 0; | |
| 934 | |
| 935 // CVIEW_T3_Temperature | |
| 936 float temperature; | |
| 937 | |
| 938 // CVIEW_T3_GasList | |
| 939 float fPpO2limitHigh, fPpO2limitLow, fPpO2ofGasAtThisDepth; | |
| 940 const SGasLine * pGasLine; | |
| 941 uint8_t oxygen, helium; | |
| 942 uint8_t lineNumber; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
943 uint8_t gasPosIdx; |
| 38 | 944 |
| 496 | 945 /* compass position */ |
| 946 point_t center; | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
947 uint16_t heading; |
| 496 | 948 |
| 38 | 949 // CVIEW_T3_StopWatch |
| 950 SDivetime Stopwatch = {0,0,0,0}; | |
| 951 float fAverageDepth, fAverageDepthAbsolute; | |
| 952 | |
| 662 | 953 #ifdef ENABLE_PSCR_MODE |
| 954 uint8_t showSimPPO2 = 1; | |
| 955 #endif | |
| 38 | 956 uint16_t tempWinX0; |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
957 uint16_t tempWinX1; |
| 38 | 958 uint16_t tempWinY0; |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
959 uint16_t tempWinY1; |
| 38 | 960 uint16_t tempWinC2X0; |
| 413 | 961 uint16_t tempWinC2Y0; |
| 962 uint16_t tempWinC2X1; | |
| 963 uint16_t tempWinC2Y1; | |
| 38 | 964 uint16_t tempWinC2Tab; |
| 965 | |
| 966 tempWinX0 = tXc1->WindowX0; | |
| 967 tempWinY0 = tXc1->WindowY0; | |
| 496 | 968 tempWinX1 = tXc1->WindowX1; |
| 969 tempWinY1 = tXc1->WindowY1; | |
| 413 | 970 |
| 38 | 971 tempWinC2X0 = tXc2->WindowX0; |
| 413 | 972 tempWinC2Y0 = tXc2->WindowY0; |
| 973 tempWinC2X1 = tXc2->WindowX1; | |
| 974 tempWinC2Y1 = tXc2->WindowY1; | |
| 38 | 975 tempWinC2Tab = tXc2->WindowTab; |
| 976 | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
977 if(settingsGetPointer()->compassInertia) |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
978 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
979 heading = (uint16_t)compass_getCompensated(); |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
980 } |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
981 else |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
982 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
983 heading = (uint16_t)stateUsed->lifeData.compass_heading; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
984 } |
|
582
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
985 if(last_customview != tX_selection_customview) /* check if current selection is disabled and should be skipped */ |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
986 { |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
987 if(t3_customview_disabled(tX_selection_customview)) |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
988 { |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
989 tX_selection_customview = t3_change_customview(ACTION_BUTTON_ENTER); |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
990 } |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
991 last_customview = tX_selection_customview; |
|
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
992 } |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
993 |
| 38 | 994 switch(tX_selection_customview) |
| 995 { | |
| 996 case CVIEW_T3_ApnoeSurfaceInfo: | |
| 997 snprintf(text,TEXTSIZE,"\032\f%c",TXT_MaxDepth); | |
| 998 | |
| 413 | 999 if(!pSettings->FlipDisplay) |
| 1000 { | |
| 1001 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1002 tXc1->WindowY0 = 100; | |
| 1003 } | |
| 1004 else | |
| 1005 { | |
| 1006 GFX_write_string(&FontT42,tXc2,text,0); | |
| 1007 tXc2->WindowY1 -= 100; /* jump to upper of two lines */ | |
| 1008 } | |
| 38 | 1009 |
| 1010 snprintf(text,TEXTSIZE,"\020\016%01.1f",unit_depth_float(stateUsed->lifeData.apnea_last_max_depth_meter)); | |
| 1011 t3_basics_colorscheme_mod(text); | |
| 413 | 1012 |
| 1013 if(!pSettings->FlipDisplay) | |
| 1014 { | |
| 1015 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1016 tXc1->WindowY0 = tempWinY0; | |
| 1017 } | |
| 1018 else | |
| 1019 { | |
| 1020 GFX_write_string(&FontT105,tXc2,text,0); | |
| 1021 tXc2->WindowY1 = tempWinC2Y1; /* jump to upper of two lines */ | |
| 1022 } | |
| 38 | 1023 |
| 1024 | |
| 1025 snprintf(text,TEXTSIZE,"\020\016%01.1f",unit_depth_float(stateUsed->lifeData.apnea_total_max_depth_meter)); | |
| 1026 t3_basics_colorscheme_mod(text); | |
| 413 | 1027 if(!pSettings->FlipDisplay) |
| 1028 { | |
| 1029 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1030 } | |
| 1031 else | |
| 1032 { | |
| 1033 GFX_write_string(&FontT105,tXc2,text,0); | |
| 1034 } | |
| 38 | 1035 break; |
| 1036 | |
| 1037 case CVIEW_T3_StopWatch: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1038 |
| 38 | 1039 Stopwatch.Total = timer_Stopwatch_GetTime(); |
| 1040 Stopwatch.Minutes = Stopwatch.Total / 60; | |
| 1041 Stopwatch.Seconds = Stopwatch.Total - ( Stopwatch.Minutes * 60 ); | |
| 1042 fAverageDepth = timer_Stopwatch_GetAvarageDepth_Meter(); | |
| 1043 fAverageDepthAbsolute = stateUsed->lifeData.average_depth_meter; | |
| 1044 | |
| 1045 snprintf(text,TEXTSIZE,"\032\f%c",TXT_AvgDepth); | |
| 1046 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1047 snprintf(text,TEXTSIZE,"\030\003\016%01.1f",unit_depth_float(fAverageDepthAbsolute)); | |
| 1048 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1049 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1050 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1051 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1052 tXc1->WindowX0 = 480; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1053 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1054 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1055 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1056 tXc1->WindowX1 = 320; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1057 tXc1->WindowY0 = t3c1.WindowY0; /* select customer window */ |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1058 } |
| 38 | 1059 // snprintf(text,TEXTSIZE,"\032\f%c%c - %c",TXT_2BYTE, TXT2BYTE_Clock, TXT_AvgDepth); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1060 |
| 38 | 1061 snprintf(text,TEXTSIZE,"\032\f%c", TXT_Stopwatch); |
| 1062 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1063 snprintf(text,TEXTSIZE,"\030\016%01.1f",unit_depth_float(fAverageDepth)); | |
| 1064 GFX_write_string(&FontT105,tXc1,text,0); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1065 if(!pSettings->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1066 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1067 tXc1->WindowY0 = 100; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1068 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1069 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1070 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1071 tXc1->WindowY1 -= 100; /* jump to upper of two lines */ |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1072 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1073 |
| 38 | 1074 snprintf(text,TEXTSIZE,"\030%u:\016\016%02u",Stopwatch.Minutes, Stopwatch.Seconds); |
| 1075 GFX_write_string(&FontT105,tXc1,text,0); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1076 |
| 496 | 1077 break; |
| 38 | 1078 |
| 1079 case CVIEW_T3_GasList: | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1080 gasPosIdx = 0; |
| 38 | 1081 snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Gaslist); |
| 1082 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1083 | |
| 1084 textpointer = 0; | |
| 1085 tXc2->WindowX0 = 0; | |
| 518 | 1086 tXc2->WindowTab = 800/3; // /2 |
| 38 | 1087 |
| 413 | 1088 if(pSettings->FlipDisplay) |
| 1089 { | |
| 1090 tXc2->WindowY1 = 0; | |
| 1091 } | |
| 1092 | |
| 38 | 1093 pGasLine = settingsGetPointer()->gas; |
| 1094 if(actualLeftMaxDepth(stateUsed)) | |
| 1095 fPpO2limitHigh = (float)(settingsGetPointer()->ppO2_max_deco) / 100; | |
| 1096 else | |
| 1097 fPpO2limitHigh = (float)(settingsGetPointer()->ppO2_max_std) / 100; | |
| 1098 fPpO2limitLow = (float)(settingsGetPointer()->ppO2_min) / 100; | |
| 1099 for(int gasId=1;gasId<=NUM_GASES;gasId++) | |
| 1100 { | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1101 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1102 if(!pGasLine[gasId].note.ub.off) |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1103 { |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1104 #endif |
| 38 | 1105 textpointer = 0; |
| 518 | 1106 text[textpointer++] = '\003'; |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1107 |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1108 lineNumber = 1; |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1109 |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1110 switch(gasPosIdx) |
| 38 | 1111 { |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1112 case 0: lineNumber = 0; |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1113 case 1: |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1114 break; |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1115 case 4: text[textpointer++] = '\001'; /* display centered */ |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1116 break; |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1117 case 2: lineNumber = 0; |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1118 case 3: text[textpointer++] = '\002'; /* display right aligned */ |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1119 default: |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1120 break; |
| 38 | 1121 } |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1122 gasPosIdx++; |
| 518 | 1123 |
| 38 | 1124 fPpO2ofGasAtThisDepth = (stateUsed->lifeData.pressure_ambient_bar - WATER_VAPOUR_PRESSURE) * pGasLine[gasId].oxygen_percentage / 100; |
| 1125 if(pGasLine[gasId].note.ub.active == 0) | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1126 strcpy(&text[textpointer++],"\031"); |
| 518 | 1127 else if(stateUsed->lifeData.actualGas.GasIdInSettings == gasId) /* actual selected gas */ |
| 1128 { | |
| 1129 strcpy(&text[textpointer++],"\030"); | |
| 1130 } | |
| 38 | 1131 else if((fPpO2ofGasAtThisDepth > fPpO2limitHigh) || (fPpO2ofGasAtThisDepth < fPpO2limitLow)) |
| 1132 strcpy(&text[textpointer++],"\025"); | |
| 518 | 1133 else if(actualBetterGasId() == gasId) |
| 1134 { | |
| 1135 strcpy(&text[textpointer++],"\026"); /* Highlight better gas */ | |
| 1136 } | |
| 38 | 1137 else |
| 518 | 1138 strcpy(&text[textpointer++],"\023"); /* Blue for travel or deco without special state */ |
| 38 | 1139 |
| 1140 text[textpointer++] = ' '; | |
| 1141 oxygen = pGasLine[gasId].oxygen_percentage; | |
| 1142 helium = pGasLine[gasId].helium_percentage; | |
| 1143 textpointer += write_gas(&text[textpointer], oxygen, helium); | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1144 |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1145 if((pGasLine[gasId].depth_meter) && (gasPosIdx < 5)) /* do not show for potential last gas because of formating issues */ |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1146 { |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1147 textpointer += snprintf(&text[textpointer],7,"\016\016%u%c%c",unit_depth_integer(pGasLine[gasId].depth_meter), unit_depth_char1(), unit_depth_char2()); |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1148 } |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1149 text[textpointer++] = 0; |
| 518 | 1150 GFX_write_string(&FontT42, tXc1, text, lineNumber); |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1151 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1152 } |
|
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1153 #endif |
| 38 | 1154 } |
| 1155 break; | |
| 1156 | |
| 1157 case CVIEW_T3_Temperature: | |
| 1158 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Temperature); | |
| 1159 GFX_write_string(&FontT42,tXc1,text,0); | |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
174
diff
changeset
|
1160 |
|
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
174
diff
changeset
|
1161 temperature = unit_temperature_float(stateUsed->lifeData.temperature_celsius); |
| 38 | 1162 textpointer = snprintf(text,TEXTSIZE,"\030\003\016%01.1f \140",temperature); // "\016\016%01.1f `" + C or F |
| 1163 if(settingsGetPointer()->nonMetricalSystem == 0) | |
| 1164 text[textpointer++] = 'C'; | |
| 1165 else | |
| 1166 text[textpointer++] = 'F'; | |
| 1167 text[textpointer++] = 0; | |
| 1168 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1169 break; | |
| 1170 | |
| 1171 case CVIEW_Compass: | |
| 496 | 1172 center.x = 600; |
| 1173 center.y = 116; | |
| 38 | 1174 snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Compass); |
| 1175 GFX_write_string(&FontT42,tXc1,text,0); | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
1176 snprintf(text,100,"\030\003%03i`",heading); |
| 38 | 1177 GFX_write_string(&FontT105,tXc1,text,0); |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
1178 t3_basics_compass(tXscreen, center, heading, stateUsed->diveSettings.compassHeading); |
| 38 | 1179 break; |
| 601 | 1180 #ifdef ENABLE_T3_PROFILE_VIEW |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
1181 case CVIEW_T3_Profile: |
| 599 | 1182 snprintf(text,100,"\032\f\002%c%c",TXT_2BYTE,TXT2BYTE_Profile); |
|
592
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
1183 GFX_write_string(&FontT42,tXc1,text,0); |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
1184 t3_miniLiveLogProfile(); |
|
f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
Ideenmodellierer
parents:
582
diff
changeset
|
1185 break; |
| 601 | 1186 #endif |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1187 case CVIEW_T3_DecoTTS: |
| 38 | 1188 case CVIEW_T3_Decostop: |
| 1189 default: | |
| 1190 // decostop | |
| 1191 if(pDecoinfo->output_time_to_surface_seconds) | |
| 1192 { | |
| 1193 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 1194 } | |
| 1195 else | |
| 1196 { | |
| 1197 nextstopDepthMeter = 0; | |
| 1198 nextstopLengthSeconds = 0; | |
| 1199 } | |
| 1200 | |
| 1201 SafetyStopTime.Total = timer_Safetystop_GetCountDown(); | |
| 1202 SafetyStopTime.Minutes = SafetyStopTime.Total / 60; | |
| 1203 SafetyStopTime.Seconds = SafetyStopTime.Total - (SafetyStopTime.Minutes * 60); | |
| 1204 | |
| 1205 if(nextstopDepthMeter) | |
| 1206 { | |
| 1207 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Decostop); | |
| 1208 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1209 | |
| 1210 textpointer = 0; | |
| 1211 snprintf(&text[textpointer],TEXTSIZE,"\020\003%u%c%c %u'" | |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1212 , unit_depth_integer(nextstopDepthMeter) |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1213 , unit_depth_char1_T105() |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1214 , unit_depth_char2_T105() |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1215 , (nextstopLengthSeconds+59)/60); |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1216 t3_basics_colorscheme_mod(text); |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1217 GFX_write_string(&FontT105,tXc1,text,0); |
| 38 | 1218 } |
| 1219 else if(SafetyStopTime.Total && (depth > timer_Safetystop_GetDepthUpperLimit())) | |
| 1220 { | |
| 1221 textpointer = 0; | |
| 1222 snprintf(&text[textpointer],TEXTSIZE,"\032\f%c%c",TXT_2BYTE,TXT2BYTE_SafetyStop2); | |
| 1223 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1224 | |
| 1225 textpointer = 0; | |
| 1226 snprintf(&text[textpointer],TEXTSIZE,"\020\003\016%u:%02u",SafetyStopTime.Minutes,SafetyStopTime.Seconds); | |
| 1227 t3_basics_colorscheme_mod(text); | |
| 496 | 1228 GFX_write_string(&FontT105,tXc1,text,0); |
| 38 | 1229 } |
|
237
ec16fd26e280
Bugfix: do not show NDL in bigscreen mode when zero
Jan Mulder <jlmulder@xs4all.nl>
parents:
214
diff
changeset
|
1230 else if(pDecoinfo->output_ndl_seconds) // NDL |
| 38 | 1231 { |
| 1232 snprintf(text,TEXTSIZE,"\032\f%c",TXT_Nullzeit); | |
| 1233 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1234 if(pDecoinfo->output_ndl_seconds < 1000 * 60) | |
| 1235 snprintf(text,TEXTSIZE,"\020\003%i'",pDecoinfo->output_ndl_seconds/60); | |
| 1236 else | |
| 1237 snprintf(text,TEXTSIZE,"\020\003%ih",pDecoinfo->output_ndl_seconds/3600); | |
| 1238 t3_basics_colorscheme_mod(text); | |
| 496 | 1239 GFX_write_string(&FontT105,tXc1,text,0); |
| 38 | 1240 } |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1241 |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1242 if(tX_selection_customview == CVIEW_T3_DecoTTS) /* add tts data on right side of screen */ |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1243 { |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1244 if(pDecoinfo->output_time_to_surface_seconds) |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1245 { |
| 722 | 1246 snprintf(text,TEXTSIZE,"\002\032\f%c",TXT_TTS); |
| 1247 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1248 if(pDecoinfo->output_time_to_surface_seconds) | |
| 1249 { | |
| 1250 if(pDecoinfo->output_time_to_surface_seconds < 100 * 60) | |
| 1251 snprintf(text,TEXTSIZE,"\020\003\002%i'",(pDecoinfo->output_time_to_surface_seconds + 59)/ 60); | |
| 1252 else | |
| 1253 snprintf(text,TEXTSIZE,"\020\003\002%ih",(pDecoinfo->output_time_to_surface_seconds + 59)/ 3600); | |
| 1254 t3_basics_colorscheme_mod(text); | |
| 1255 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1256 } | |
| 1257 } | |
| 1258 else if(pDecoinfo->super_saturation > 0.1) | |
| 1259 { | |
| 1260 snprintf(text,TEXTSIZE,"\002\032\f%c",TXT_ActualGradient); | |
| 1261 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1262 snprintf(text,TEXTSIZE,"\020\003\002%.0f\016\016%%\017",100 * pDecoinfo->super_saturation); | |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1263 t3_basics_colorscheme_mod(text); |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1264 GFX_write_string(&FontT105,tXc1,text,0); |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1265 } |
|
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
1266 } |
| 38 | 1267 break; |
| 1268 | |
| 1269 case CVIEW_sensors: | |
| 1270 snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE,TXT2BYTE_O2monitor); | |
| 1271 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1272 | |
| 1273 for(int i=0;i<3;i++) | |
| 1274 { | |
| 1275 textpointer = 0; | |
| 1276 text[textpointer++] = '\030'; | |
| 1277 if(i==1) | |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1278 text[textpointer++] = '\001'; /* center */ |
| 38 | 1279 else if(i==2) |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1280 text[textpointer++] = '\002'; /* right */ |
|
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1281 |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
564
diff
changeset
|
1282 if((stateUsed->diveSettings.ppo2sensors_deactivated & (1<<i)) || (stateUsed->lifeData.ppO2Sensor_bar[i] == 0.0)) |
| 38 | 1283 { |
| 662 | 1284 #ifdef ENABLE_PSCR_MODE |
| 1285 if((stateUsed->diveSettings.diveMode == DIVEMODE_PSCR) && (showSimPPO2) && (stateUsed->mode == MODE_DIVE)) /* display ppo2 sim in blue letters in case a slot is not used in the ppo2 custom view */ | |
| 1286 { | |
| 1287 text[textpointer++] = '\023'; | |
| 1288 textpointer += snprintf(&text[textpointer],TEXTSIZE,"%.2f",stateUsed->lifeData.ppo2Simulated_bar); | |
| 1289 showSimPPO2 = 0; | |
| 1290 } | |
| 1291 else | |
| 1292 #endif | |
| 1293 { | |
| 1294 text[textpointer++] = '\031'; | |
| 1295 text[textpointer++] = ' '; | |
| 1296 text[textpointer++] = '-'; | |
| 1297 text[textpointer++] = ' '; | |
| 1298 text[textpointer++] = 0; | |
| 1299 } | |
| 38 | 1300 } |
| 1301 else | |
| 1302 { | |
| 1303 if(stateUsed->warnings.sensorOutOfBounds[i]) | |
| 1304 text[textpointer++] = '\025'; | |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1305 textpointer += snprintf(&text[textpointer],TEXTSIZE,"%.2f",stateUsed->lifeData.ppO2Sensor_bar[i]); |
| 38 | 1306 } |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1307 GFX_write_string(&FontT105,tXc1,text,0); |
| 656 | 1308 |
| 1309 | |
| 662 | 1310 if((pSettings->scrubTimerMode != SCRUB_TIMER_OFF) && isLoopMode(pSettings->dive_mode)) |
| 656 | 1311 { |
| 1312 snprintf(text,TEXTSIZE,"\032\002\f%c",TXT_ScrubTime); | |
| 1313 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1314 | |
| 1315 textpointer = 0; | |
| 1316 if(settingsGetPointer()->scrubTimerMode == SCRUB_TIMER_MINUTES) | |
| 1317 { | |
| 710 | 1318 textpointer += snprintf(&text[textpointer],10,"\020\002%3u'", pSettings->scrubberData[pSettings->scubberActiveId].TimerCur); |
| 656 | 1319 } |
| 1320 else | |
| 1321 { | |
| 710 | 1322 textpointer += snprintf(&text[textpointer],20,"\020\002%u\016\016%%\017", (uint16_t)(pSettings->scrubberData[pSettings->scubberActiveId].TimerCur * 100 / pSettings->scrubberData[pSettings->scubberActiveId].TimerMax)); |
| 656 | 1323 } |
| 1324 GFX_write_string(&FontT105,tXc1,text,1); | |
| 1325 } | |
| 38 | 1326 } |
| 1327 break; | |
| 1328 | |
| 1329 case CVIEW_T3_MaxDepth: | |
| 1330 snprintf(text,TEXTSIZE,"\032\f%c",TXT_MaxDepth); | |
| 413 | 1331 if(pSettings->FlipDisplay) |
| 1332 { | |
| 1333 if(mode == DIVEMODE_Apnea) | |
| 1334 { | |
| 1335 GFX_write_string(&FontT42,tXc2,text,0); | |
| 1336 } | |
| 1337 else | |
| 1338 { | |
| 1339 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1340 } | |
| 1341 } | |
| 1342 else | |
| 1343 { | |
| 1344 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1345 } | |
| 38 | 1346 snprintf(text,TEXTSIZE,"\020\003\016%01.1f",unit_depth_float(stateUsed->lifeData.max_depth_meter)); |
| 1347 t3_basics_colorscheme_mod(text); | |
| 413 | 1348 if(pSettings->FlipDisplay) |
| 1349 { | |
| 1350 if(mode == DIVEMODE_Apnea) | |
| 1351 { | |
| 1352 GFX_write_string(&FontT105,tXc2,text,0); | |
| 1353 } | |
| 1354 else | |
| 1355 { | |
| 1356 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1357 } | |
| 1358 } | |
| 1359 else | |
| 1360 { | |
| 496 | 1361 GFX_write_string(&FontT105,tXc1,text,0); |
| 413 | 1362 } |
| 38 | 1363 break; |
| 1364 | |
| 1365 case CVIEW_T3_TTS: | |
| 1366 snprintf(text,TEXTSIZE,"\032\f%c",TXT_TTS); | |
| 1367 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1368 if(pDecoinfo->output_time_to_surface_seconds) | |
| 1369 { | |
| 1370 if(pDecoinfo->output_time_to_surface_seconds < 1000 * 60) | |
|
214
51a3aeffc6b3
Bugfix: handle rounding of TTS and future TTS consistently
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1371 snprintf(text,TEXTSIZE,"\020\003\002%i'",(pDecoinfo->output_time_to_surface_seconds + 59)/ 60); |
| 38 | 1372 else |
|
214
51a3aeffc6b3
Bugfix: handle rounding of TTS and future TTS consistently
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1373 snprintf(text,TEXTSIZE,"\020\003\002%ih",(pDecoinfo->output_time_to_surface_seconds + 59)/ 3600); |
| 38 | 1374 t3_basics_colorscheme_mod(text); |
| 496 | 1375 GFX_write_string(&FontT105,tXc1,text,0); |
| 38 | 1376 } |
| 1377 break; | |
| 1378 | |
| 1379 case CVIEW_T3_ppO2andGas: | |
| 1380 snprintf(text,TEXTSIZE,"\032\f%c",TXT_ppO2); | |
| 1381 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1382 snprintf(text,TEXTSIZE,"\020\003%01.2f",stateUsed->lifeData.ppO2); | |
| 1383 t3_basics_colorscheme_mod(text); | |
| 496 | 1384 GFX_write_string(&FontT105,tXc1,text,0); |
| 38 | 1385 |
| 1386 textpointer = 0; | |
| 1387 text[textpointer++] = '\020'; | |
| 1388 text[textpointer++] = '\003'; | |
| 1389 oxygen_percentage = 100; | |
| 1390 oxygen_percentage -= stateUsed->lifeData.actualGas.nitrogen_percentage; | |
| 1391 oxygen_percentage -= stateUsed->lifeData.actualGas.helium_percentage; | |
| 1392 text[textpointer++] = '\002'; | |
| 1393 tHome_gas_writer(oxygen_percentage,stateUsed->lifeData.actualGas.helium_percentage,&text[textpointer]); | |
| 1394 //textpointer = snprintf(&text[textpointer],TEXTSIZE,"\020\002%02u/%02u",oxygen_percentage, stateUsed->lifeData.actualGas.helium_percentage); | |
| 1395 t3_basics_colorscheme_mod(text); | |
| 496 | 1396 GFX_write_string(&FontT48,tXc1,text,0); |
| 38 | 1397 break; |
| 496 | 1398 |
| 1399 case CVIEW_T3_Navigation: | |
| 1400 Stopwatch.Total = timer_Stopwatch_GetTime(); | |
| 1401 Stopwatch.Minutes = Stopwatch.Total / 60; | |
| 1402 Stopwatch.Seconds = Stopwatch.Total - ( Stopwatch.Minutes * 60 ); | |
| 1403 fAverageDepth = timer_Stopwatch_GetAvarageDepth_Meter(); | |
| 1404 | |
| 1405 if(!pSettings->FlipDisplay) | |
| 1406 { | |
| 1407 tXc2->WindowX0 = 550; | |
| 1408 } | |
| 1409 else | |
| 1410 { | |
| 1411 tXc2->WindowX1 = 800; | |
| 1412 tXc2->WindowY0 = t3c2.WindowY0; /* select customer window */ | |
| 1413 } | |
| 1414 | |
| 1415 snprintf(text,TEXTSIZE,"\032\002\f%c", TXT_Stopwatch); | |
| 511 | 1416 GFX_write_string(&FontT42,tXc1,text,0); |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1417 snprintf(text,TEXTSIZE,"\030\002\016%01.1f",unit_depth_float(fAverageDepth)); |
| 511 | 1418 GFX_write_string(&FontT105,tXc1,text,0); |
| 496 | 1419 if(!pSettings->FlipDisplay) |
| 1420 { | |
| 1421 tXc2->WindowY0 = 100; | |
| 1422 } | |
| 1423 else | |
| 1424 { | |
| 1425 tXc2->WindowY1 -= 100; /* jump to upper of two lines */ | |
| 1426 } | |
| 1427 | |
| 1428 snprintf(text,TEXTSIZE,"\030\002%u:\016\016%02u",Stopwatch.Minutes, Stopwatch.Seconds); | |
| 511 | 1429 GFX_write_string(&FontT105,tXc1,text,1); |
| 496 | 1430 |
| 1431 | |
| 1432 center.x = 400; | |
| 1433 center.y = 116; | |
| 1434 | |
| 1435 snprintf(text,TEXTSIZE,"\032\f%c%c",TXT_2BYTE, TXT2BYTE_Compass); | |
| 1436 GFX_write_string(&FontT42,tXc1,text,0); | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
1437 snprintf(text,100,"\030%03i`",heading); |
| 496 | 1438 GFX_write_string(&FontT144,tXc1,text,0); |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
529
diff
changeset
|
1439 t3_basics_compass(tXscreen, center, heading, stateUsed->diveSettings.compassHeading); |
| 496 | 1440 |
| 1441 break; | |
| 1442 | |
| 1443 case CVIEW_T3_DepthData: | |
| 1444 snprintf(text,TEXTSIZE,"\032\f%c",TXT_MaxDepth); | |
| 1445 if(pSettings->FlipDisplay) | |
| 1446 { | |
| 1447 if(mode == DIVEMODE_Apnea) | |
| 1448 { | |
| 1449 GFX_write_string(&FontT42,tXc2,text,0); | |
| 1450 } | |
| 1451 else | |
| 1452 { | |
| 1453 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1454 } | |
| 1455 } | |
| 1456 else | |
| 1457 { | |
| 1458 GFX_write_string(&FontT42,tXc1,text,0); | |
| 1459 } | |
| 1460 snprintf(text,TEXTSIZE,"\020\003\016%01.1f",unit_depth_float(stateUsed->lifeData.max_depth_meter)); | |
| 1461 t3_basics_colorscheme_mod(text); | |
| 1462 if(pSettings->FlipDisplay) | |
| 1463 { | |
| 1464 if(mode == DIVEMODE_Apnea) | |
| 1465 { | |
| 1466 GFX_write_string(&FontT105,tXc2,text,0); | |
| 1467 } | |
| 1468 else | |
| 1469 { | |
| 1470 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1471 } | |
| 1472 } | |
| 1473 else | |
| 1474 { | |
| 1475 GFX_write_string(&FontT105,tXc1,text,0); | |
| 1476 } | |
| 1477 fAverageDepthAbsolute = stateUsed->lifeData.average_depth_meter; | |
| 1478 snprintf(text,TEXTSIZE,"\032\002\f%c",TXT_AvgDepth); | |
| 511 | 1479 GFX_write_string(&FontT42,tXc1,text,0); |
| 496 | 1480 |
|
564
5e0a75e2f00b
Bugfix One or more deactivated sensors hide sensor display:
Ideenmodellierer
parents:
553
diff
changeset
|
1481 snprintf(text,TEXTSIZE,"\020\003\002\016\%01.1f",unit_depth_float(fAverageDepthAbsolute)); |
| 511 | 1482 GFX_write_string(&FontT105,tXc1,text,0); |
| 496 | 1483 break; |
| 38 | 1484 } |
| 496 | 1485 |
| 1486 | |
| 1487 | |
| 38 | 1488 tXc1->WindowX0 = tempWinX0; |
| 1489 tXc1->WindowY0 = tempWinY0; | |
| 496 | 1490 tXc1->WindowX1 = tempWinX1; |
| 1491 tXc1->WindowY1 = tempWinY1; | |
| 413 | 1492 |
| 38 | 1493 tXc2->WindowX0 = tempWinC2X0; |
| 413 | 1494 tXc2->WindowY0 = tempWinC2Y0; |
| 1495 tXc2->WindowX1 = tempWinC2X1; | |
| 1496 tXc2->WindowY1 = tempWinC2Y1; | |
| 38 | 1497 tXc2->WindowTab = tempWinC2Tab; |
| 1498 } | |
| 1499 | |
| 1500 | |
| 1501 uint8_t t3_test_customview_warnings(void) | |
| 1502 { | |
| 1503 uint8_t count = 0; | |
| 1504 | |
| 1505 count = 0; | |
| 1506 count += stateUsed->warnings.decoMissed; | |
| 1507 count += stateUsed->warnings.ppO2Low; | |
| 1508 count += stateUsed->warnings.ppO2High; | |
| 1509 //count += stateUsed->warnings.lowBattery; | |
| 1510 count += stateUsed->warnings.sensorLinkLost; | |
| 1511 count += stateUsed->warnings.fallback; | |
| 1512 | |
| 1513 return count; | |
| 1514 } | |
| 1515 | |
| 1516 //void t3_show_customview_warnings(GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXl1, GFX_DrawCfgWindow* tXr1, uint8_t mode) | |
| 1517 void t3_basics_show_customview_warnings(GFX_DrawCfgWindow* tXc1) | |
| 1518 { | |
| 1519 char text[256], textMain[256]; | |
| 1520 uint8_t textpointer, textpointerMain, lineFree, more; | |
| 1521 | |
| 1522 snprintf(text,TEXTSIZE,"\025\f%c",TXT_Warning); | |
| 1523 GFX_write_string(&FontT42,&t3c1,text,0); | |
| 1524 | |
| 1525 lineFree = 1; | |
| 1526 more = 0; | |
| 1527 | |
| 1528 textpointerMain = 0; | |
| 511 | 1529 textMain[textpointerMain++] = '\025'; /* red */ |
| 1530 textMain[textpointerMain++] = '\003'; /* doublesize */ | |
| 38 | 1531 |
| 1532 textpointer = 0; | |
| 1533 | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1534 text[textpointer++] = '\031'; |
| 38 | 1535 text[textpointer++] = TXT_2BYTE; |
| 1536 text[textpointer++] = TXT2BYTE_WarnDecoMissed; | |
| 1537 if(stateUsed->warnings.decoMissed) | |
| 1538 { | |
| 1539 text[textpointer - 3] = '\025'; | |
| 1540 if(lineFree) | |
| 1541 { | |
| 1542 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1543 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1544 textMain[textpointerMain] = 0; | |
| 1545 lineFree--; | |
| 1546 } | |
| 1547 else | |
| 1548 { | |
| 1549 more++; | |
| 1550 } | |
| 1551 } | |
| 1552 | |
| 1553 text[textpointer++] = '\t'; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1554 text[textpointer++] = '\031'; |
| 38 | 1555 text[textpointer++] = TXT_2BYTE; |
| 1556 text[textpointer++] = TXT2BYTE_WarnPPO2Low; | |
| 1557 if(stateUsed->warnings.ppO2Low) | |
| 1558 { | |
| 1559 text[textpointer - 3] = '\025'; | |
| 1560 if(lineFree) | |
| 1561 { | |
| 1562 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1563 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1564 textMain[textpointerMain] = 0; | |
| 1565 lineFree--; | |
| 1566 } | |
| 1567 else | |
| 1568 { | |
| 1569 more++; | |
| 1570 } | |
| 1571 } | |
| 1572 | |
| 1573 text[textpointer++] = '\n'; | |
| 1574 text[textpointer++] = '\r'; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1575 text[textpointer++] = '\031'; |
| 38 | 1576 text[textpointer++] = TXT_2BYTE; |
| 1577 text[textpointer++] = TXT2BYTE_WarnPPO2High; | |
| 1578 if(stateUsed->warnings.ppO2High) | |
| 1579 { | |
| 1580 text[textpointer - 3] = '\025'; | |
| 1581 if(lineFree) | |
| 1582 { | |
| 1583 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1584 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1585 textMain[textpointerMain] = 0; | |
| 1586 lineFree--; | |
| 1587 } | |
| 1588 else | |
| 1589 { | |
| 1590 more++; | |
| 1591 } | |
| 1592 } | |
| 1593 | |
| 1594 text[textpointer++] = '\t'; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1595 text[textpointer++] = '\031'; |
| 38 | 1596 text[textpointer++] = TXT_2BYTE; |
| 1597 text[textpointer++] = TXT2BYTE_WarnFallback; | |
| 1598 if(stateUsed->warnings.fallback) | |
| 1599 { | |
| 1600 text[textpointer - 3] = '\025'; | |
| 1601 if(lineFree) | |
| 1602 { | |
| 1603 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1604 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1605 textMain[textpointerMain] = 0; | |
| 1606 lineFree--; | |
| 1607 } | |
| 1608 else | |
| 1609 { | |
| 1610 more++; | |
| 1611 } | |
| 1612 } | |
| 1613 | |
| 1614 text[textpointer++] = '\n'; | |
| 1615 text[textpointer++] = '\r'; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1616 text[textpointer++] = '\031'; |
| 38 | 1617 text[textpointer++] = TXT_2BYTE; |
| 1618 text[textpointer++] = TXT2BYTE_WarnSensorLinkLost; | |
| 1619 if(stateUsed->warnings.sensorLinkLost) | |
| 1620 { | |
| 1621 text[textpointer - 3] = '\025'; | |
| 1622 if(lineFree) | |
| 1623 { | |
| 1624 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1625 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1626 textMain[textpointerMain] = 0; | |
| 1627 lineFree--; | |
| 1628 } | |
| 1629 else | |
| 1630 { | |
| 1631 more++; | |
| 1632 } | |
| 1633 } | |
| 1634 | |
| 1635 /* | |
| 1636 text[textpointer++] = '\t'; | |
|
527
962d7b2c18c6
Do not show gases in "Off" state in custom gas list:
Ideenmodellierer
parents:
518
diff
changeset
|
1637 text[textpointer++] = '\031'; |
| 38 | 1638 text[textpointer++] = TXT_2BYTE; |
| 1639 text[textpointer++] = TXT2BYTE_WarnBatteryLow; | |
| 1640 if(stateUsed->warnings.lowBattery) | |
| 1641 { | |
| 1642 text[textpointer - 3] = '\025'; | |
| 1643 if(lineFree) | |
| 1644 { | |
| 1645 textMain[textpointerMain++] = TXT_2BYTE; | |
| 1646 textMain[textpointerMain++] = text[textpointer - 1]; | |
| 1647 textMain[textpointerMain] = 0; | |
| 1648 lineFree--; | |
| 1649 } | |
| 1650 else | |
| 1651 { | |
| 1652 more++; | |
| 1653 } | |
| 1654 } | |
| 1655 */ | |
| 1656 text[textpointer] = 0; | |
| 1657 /* | |
| 1658 if(more) | |
| 1659 { | |
| 1660 text[textpointer++] = '\002'; | |
| 1661 text[textpointer++] = '+'; | |
| 1662 if(more < 10) | |
| 1663 text[textpointer++] = '0' + more; | |
| 1664 else | |
| 1665 text[textpointer++] = 'X'; | |
| 1666 text[textpointer] = 0; | |
| 1667 } | |
| 1668 */ | |
| 511 | 1669 GFX_write_string(&FontT48,&t3c1,textMain,0); |
| 38 | 1670 if(more) |
| 1671 { | |
| 511 | 1672 GFX_write_string(&FontT48,&t3c2,text,0); |
| 38 | 1673 } |
| 1674 } | |
| 1675 | |
| 496 | 1676 uint8_t t3_customview_disabled(uint8_t view) |
| 1677 { | |
| 1678 uint8_t i = 0; | |
| 1679 uint8_t cv_disabled = 0; | |
| 1680 const uint8_t *pcv_changelist; | |
| 1681 uint32_t cv_config = settingsGetPointer()->cv_config_BigScreen; | |
| 1682 | |
| 511 | 1683 pcv_changelist = cv_changelist_BS; |
| 496 | 1684 |
| 1685 while(pcv_changelist[i] != CVIEW_T3_END) | |
| 1686 { | |
| 1687 if((view == pcv_changelist[i]) && !CHECK_BIT_THOME(cv_config, pcv_changelist[i])) | |
| 1688 { | |
| 1689 cv_disabled = 1; | |
| 1690 break; | |
| 1691 } | |
| 1692 i++; | |
| 1693 } | |
| 1694 | |
| 1695 if (((view == CVIEW_sensors) || (view == CVIEW_sensors_mV)) && | |
|
582
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
1696 ((stateUsed->diveSettings.ppo2sensors_deactivated == 0x07) || (stateUsed->diveSettings.ccrOption == 0) || stateUsed->warnings.fallback)) |
| 496 | 1697 { |
| 1698 cv_disabled = 1; | |
| 1699 } | |
| 1700 | |
| 1701 return cv_disabled; | |
| 1702 } | |
| 38 | 1703 |
|
582
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
1704 uint8_t t3_change_customview(uint8_t action) |
| 38 | 1705 { |
| 511 | 1706 |
| 496 | 1707 t3_basics_change_customview(&t3_selection_customview, t3_customviewsStandard, action); |
|
582
64bf41faab83
Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents:
577
diff
changeset
|
1708 return t3_selection_customview; |
| 38 | 1709 } |
| 1710 | |
| 1711 | |
| 511 | 1712 void t3_basics_change_customview(uint8_t *tX_selection_customview,const uint8_t *tX_customviews, uint8_t action) |
| 38 | 1713 { |
| 1714 const SDecoinfo * pDecoinfo; | |
| 1715 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1716 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 1717 else | |
| 1718 pDecoinfo = &stateUsed->decolistVPM; | |
| 1719 | |
| 511 | 1720 uint8_t curViewIdx = 0xff; |
| 1721 uint8_t index = 0; | |
| 599 | 1722 uint8_t indexOverrun = 0; |
| 511 | 1723 uint8_t lastViewIdx = 0; |
| 599 | 1724 uint8_t iterate = 0; /* set to 1 if a view has to be skipped */ |
| 1725 uint8_t useFallback = 0; /* is set if the current view is disabled */ | |
| 1726 uint8_t fallbackSelection = CVIEW_noneOrDebug; /* show "None" view per default */ | |
| 38 | 1727 |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1728 /* set pointer to currently selected view and count number of entries */ |
| 511 | 1729 while((tX_customviews[index] != CVIEW_T3_END)) |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1730 { |
| 511 | 1731 if (tX_customviews[index] == *tX_selection_customview) |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1732 { |
| 511 | 1733 curViewIdx = index; |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1734 } |
| 511 | 1735 index++; |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1736 } |
| 511 | 1737 if(curViewIdx == 0xff) /* called with unknown view */ |
| 496 | 1738 { |
| 511 | 1739 curViewIdx = 0; |
| 599 | 1740 *tX_selection_customview = CVIEW_noneOrDebug; /* show "None" view per default */ |
| 496 | 1741 } |
| 511 | 1742 lastViewIdx = index; |
| 1743 index = curViewIdx; | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1744 do |
|
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1745 { |
|
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1746 iterate = 0; |
| 496 | 1747 switch(action) |
| 1748 { | |
| 1749 case ACTION_BUTTON_ENTER: | |
| 1750 case ACTION_PITCH_POS: | |
| 1751 | |
| 511 | 1752 if(tX_customviews[index] != CVIEW_T3_END) |
| 496 | 1753 { |
| 511 | 1754 index++; |
| 1755 } | |
| 1756 if(tX_customviews[index] == CVIEW_T3_END) | |
| 1757 { | |
| 1758 index = 0; | |
| 599 | 1759 indexOverrun = 1; |
| 496 | 1760 } |
| 1761 break; | |
| 1762 case ACTION_PITCH_NEG: | |
| 511 | 1763 if(index == 0) |
| 496 | 1764 { |
| 511 | 1765 index = lastViewIdx - 1; |
| 599 | 1766 indexOverrun = 1; |
| 496 | 1767 } |
| 1768 else | |
| 1769 { | |
| 511 | 1770 index--; |
| 496 | 1771 } |
| 1772 break; | |
| 1773 default: | |
| 1774 break; | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1775 } |
| 496 | 1776 |
| 511 | 1777 if(t3_customview_disabled(tX_customviews[index])) |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1778 { |
|
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1779 iterate = 1; |
| 599 | 1780 if(*tX_selection_customview == tX_customviews[index]) |
| 1781 { | |
| 1782 useFallback = 1; /* the provided view is disabled => use fallback */ | |
| 1783 } | |
|
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
384
diff
changeset
|
1784 } |
| 599 | 1785 else /* special case which are enabled but not to be displayed at the moment */ |
| 1786 { | |
| 1787 if(settingsGetPointer()->MotionDetection != MOTION_DETECT_SECTOR) /* no hiding in case of active sector view option (fixed mapping would change during dive) */ | |
| 1788 { | |
| 601 | 1789 /* Skip TTS if value is 0 */ |
| 1790 if((tX_customviews[index] == CVIEW_T3_TTS) && (!pDecoinfo->output_time_to_surface_seconds)) | |
| 599 | 1791 { |
| 601 | 1792 if(*tX_selection_customview == tX_customviews[index]) |
| 1793 { | |
| 1794 useFallback = 1; /* the provided view is disabled => use fallback */ | |
| 1795 } | |
| 599 | 1796 iterate = 1; |
| 601 | 1797 if(fallbackSelection == CVIEW_noneOrDebug) |
| 1798 { | |
| 1799 fallbackSelection = CVIEW_T3_TTS; | |
| 1800 } | |
| 599 | 1801 } |
| 601 | 1802 /* Skip Deco if NDL is not set */ |
| 1803 if((tX_customviews[index] == CVIEW_T3_Decostop) && ((!pDecoinfo->output_ndl_seconds) && (!pDecoinfo->output_time_to_surface_seconds) && (timer_Safetystop_GetCountDown() == 0))) | |
| 599 | 1804 { |
| 601 | 1805 if(*tX_selection_customview == tX_customviews[index]) |
| 1806 { | |
| 1807 useFallback = 1; /* the provided view is disabled => use fallback */ | |
| 1808 } | |
| 1809 fallbackSelection = CVIEW_T3_Decostop; | |
| 599 | 1810 iterate = 1; |
| 1811 } | |
| 1812 } | |
| 1813 } | |
| 1814 if((iterate) && (action == ACTION_END)) /* ACTION_END is used to check the enable state of the provided view. If it is enable the function will return without change */ | |
| 496 | 1815 { |
| 1816 action = ACTION_BUTTON_ENTER; | |
| 1817 } | |
| 599 | 1818 }while ((iterate == 1) && (!((indexOverrun == 1) && (*tX_selection_customview == tX_customviews[index])))); /* no other available view found => use fallback */ |
| 38 | 1819 |
| 599 | 1820 if(*tX_selection_customview == tX_customviews[index]) |
| 1821 { | |
| 1822 if(useFallback) | |
| 1823 { | |
| 1824 *tX_selection_customview = fallbackSelection; /* no active view found => keep actual view or change to fallback if actual view is deactivated */ | |
| 1825 } | |
| 1826 } | |
| 1827 else | |
| 1828 { | |
| 1829 *tX_selection_customview = tX_customviews[index]; | |
| 1830 } | |
| 38 | 1831 } |
| 1832 | |
| 1833 | |
| 1834 void t3_basics_colorscheme_mod(char *text) | |
| 1835 { | |
| 1836 if((text[0] == '\020') && !GFX_is_colorschemeDiveStandard()) | |
| 1837 { | |
| 1838 text[0] = '\027'; | |
| 1839 } | |
| 1840 } | |
| 1841 | |
| 1842 | |
| 496 | 1843 point_t t3_compass_circle(uint8_t id, uint16_t degree, point_t center) |
| 38 | 1844 { |
| 1845 float fCos, fSin; | |
| 1846 const float piMult = ((2 * 3.14159) / 360); | |
| 1847 // const int radius[4] = {95,105,115,60}; | |
| 1848 const int radius[4] = {85,95,105,90}; | |
| 496 | 1849 static point_t forcenter = {.x = 900, .y = 500}; /* used to identify change of circle position */ |
| 38 | 1850 static point_t r[4][360] = { 0 }; |
| 1851 | |
| 496 | 1852 if((r[0][0].y == 0) || (forcenter.x != center.x) || (forcenter.y != center.y)) /* calculate values only once during first call or if center position changed */ |
| 38 | 1853 { |
| 1854 for(int i=0;i<360;i++) | |
| 1855 { | |
| 1856 fCos = cos(i * piMult); | |
| 1857 fSin = sin(i * piMult); | |
| 1858 for(int j=0;j<4;j++) | |
| 1859 { | |
| 496 | 1860 r[j][i].x = center.x + (int)(fSin * radius[j]); |
| 1861 r[j][i].y = center.y + (int)(fCos * radius[j]); | |
| 38 | 1862 } |
| 1863 } | |
| 496 | 1864 forcenter.x = center.x; |
| 1865 forcenter.y = center.y; | |
| 38 | 1866 } |
| 1867 if(id > 3) id = 0; | |
| 1868 if(degree > 359) degree = 0; | |
| 1869 return r[id][degree]; | |
| 1870 } | |
| 1871 | |
| 1872 | |
| 496 | 1873 void t3_basics_compass(GFX_DrawCfgScreen *tXscreen, point_t center, uint16_t ActualHeading, uint16_t UserSetHeading) |
| 38 | 1874 { |
| 496 | 1875 uint8_t loop = 0; |
| 38 | 1876 uint16_t LineHeading; |
| 496 | 1877 |
| 38 | 1878 static int32_t LastHeading = 0; |
| 1879 int32_t newHeading = 0; | |
| 1880 int32_t diff = 0; | |
| 1881 int32_t diff2 = 0; | |
| 1882 | |
| 1883 int32_t diffAbs = 0; | |
| 1884 int32_t diffAbs2 = 0; | |
| 1885 | |
| 1886 newHeading = ActualHeading; | |
| 1887 | |
| 1888 diff = newHeading - LastHeading; | |
| 1889 | |
| 1890 if(newHeading < LastHeading) | |
| 1891 diff2 = newHeading + 360 - LastHeading; | |
| 1892 else | |
| 1893 diff2 = newHeading - 360 - LastHeading; | |
| 1894 | |
| 1895 diffAbs = diff; | |
| 1896 if(diffAbs < 0) | |
| 1897 diffAbs *= -1; | |
| 1898 | |
| 1899 diffAbs2 = diff2; | |
| 1900 if(diffAbs2 < 0) | |
| 1901 diffAbs2 *= -1; | |
| 1902 | |
| 1903 if(diffAbs <= diffAbs2) | |
| 1904 newHeading = LastHeading + (diff / 2); | |
| 1905 else | |
| 1906 newHeading = LastHeading + (diff2 / 2); | |
| 1907 | |
| 1908 if(newHeading < 0) | |
| 1909 newHeading += 360; | |
| 1910 else | |
| 1911 if(newHeading >= 360) | |
| 1912 newHeading -= 360; | |
| 1913 | |
| 1914 LastHeading = newHeading; | |
| 1915 ActualHeading = newHeading; | |
| 1916 | |
| 1917 if (ActualHeading < 90) | |
| 1918 ActualHeading += 360; | |
| 1919 | |
| 1920 while(ActualHeading > 359) ActualHeading -= 360; | |
| 1921 | |
| 1922 LineHeading = 360 - ActualHeading; | |
| 496 | 1923 |
| 1924 GFX_draw_thick_line(9,tXscreen, t3_compass_circle(0,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font030); // North | |
| 38 | 1925 LineHeading += 90; |
| 496 | 1926 |
| 1927 for (loop = 0; loop < 3; loop++) | |
| 1928 { | |
| 1929 if(LineHeading > 359) LineHeading -= 360; | |
| 1930 GFX_draw_thick_line(9,tXscreen, t3_compass_circle(0,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Main Ticks | |
| 1931 LineHeading += 90; | |
| 1932 } | |
| 38 | 1933 |
| 1934 LineHeading = 360 - ActualHeading; | |
| 1935 LineHeading += 45; | |
| 496 | 1936 |
| 1937 for (loop = 0; loop < 4; loop++) | |
| 1938 { | |
| 1939 if(LineHeading > 359) LineHeading -= 360; | |
| 1940 GFX_draw_thick_line(5,tXscreen, t3_compass_circle(1,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Subtick | |
| 1941 LineHeading += 90; | |
| 1942 } | |
| 38 | 1943 |
| 1944 LineHeading = 360 - ActualHeading; | |
| 1945 LineHeading += 22; | |
| 496 | 1946 for (loop = 0; loop < 8; loop++) |
| 1947 { | |
| 1948 if(LineHeading > 359) LineHeading -= 360; | |
| 1949 GFX_draw_thick_line(3,tXscreen, t3_compass_circle(1,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_Font031); // Subtick | |
| 1950 LineHeading += 45; | |
| 1951 } | |
| 38 | 1952 if(UserSetHeading) |
| 1953 { | |
| 1954 LineHeading = UserSetHeading + 360 - ActualHeading; | |
| 1955 if(LineHeading > 359) LineHeading -= 360; | |
| 496 | 1956 GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_CompassUserHeadingTick); |
| 38 | 1957 |
| 1958 // R�ckpeilung, User Back Heading | |
| 1959 LineHeading = UserSetHeading + 360 + 180 - ActualHeading; | |
| 1960 if(LineHeading > 359) LineHeading -= 360; | |
| 1961 if(LineHeading > 359) LineHeading -= 360; | |
| 496 | 1962 GFX_draw_thick_line(9,tXscreen, t3_compass_circle(3,LineHeading, center), t3_compass_circle(2,LineHeading, center), CLUT_CompassUserBackHeadingTick); |
| 38 | 1963 } |
| 1964 | |
| 1965 GFX_draw_circle(tXscreen, center, 106, CLUT_Font030); | |
| 1966 GFX_draw_circle(tXscreen, center, 107, CLUT_Font030); | |
| 1967 GFX_draw_circle(tXscreen, center, 108, CLUT_Font030); | |
| 1968 } | |
|
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1969 |
|
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1970 uint8_t t3_GetEnabled_customviews() |
|
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1971 { |
| 496 | 1972 uint8_t *pViews; |
| 1973 uint8_t increment = 1; | |
|
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1974 uint8_t enabledViewCnt = 0; |
| 496 | 1975 |
| 511 | 1976 pViews = (uint8_t*)t3_customviewsStandard; |
| 496 | 1977 while((*pViews != CVIEW_T3_END)) |
| 1978 { | |
| 1979 increment = 1; | |
| 1980 /* check if view is enabled */ | |
| 1981 if(t3_customview_disabled(*pViews)) | |
| 1982 { | |
| 1983 increment = 0; | |
| 1984 } | |
| 1985 pViews++; | |
| 1986 enabledViewCnt += increment; | |
| 1987 } | |
|
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1988 return enabledViewCnt; |
|
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1989 } |
|
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
272
diff
changeset
|
1990 |
| 518 | 1991 uint8_t t3_getCustomView(void) |
| 1992 { | |
| 1993 return t3_selection_customview; | |
| 1994 } |