Mercurial > public > ostc4
annotate Discovery/Src/externLogbookFlash.c @ 389:ebc2b571a0b9 maintain-1
Fix case for case sensitive OS
The new file is called motion.h and not Motion.h
Signed-off-by: Jan Mulder <jan@jlmulder.nl>
author | Jan Mulder <jan@jlmulder.nl> |
---|---|
date | Sun, 01 Dec 2019 17:28:35 +0100 |
parents | c7e665e0b08f |
children | 2174fb133dbe |
rev | line source |
---|---|
38 | 1 /** |
2 ****************************************************************************** | |
3 * @copyright heinrichs weikamp | |
4 * @file externLogbookFlash.c | |
5 * @author heinrichs weikamp gmbh | |
6 * @date 07-Aug-2014 | |
7 * @version V0.0.4 | |
8 * @since 29-Sept-2015 | |
9 * @brief Main File to access the new 1.8 Volt Spansion S25FS256S 256 Mbit (32 Mbyte) | |
10 * @bug | |
11 * @warning | |
12 * | |
13 @verbatim | |
14 ============================================================================== | |
15 ##### Logbook Header (TOC) ##### | |
16 ============================================================================== | |
17 [..] Memory useage: | |
18 NEW: Spansion S25FS-S256S | |
19 | |
20 only 8x 4KB and 1x 32KB, remaining is 64KB or 256KB | |
21 Sector Size (kbyte) Sector Count Sector Range Address Range (Byte Address) Notes | |
22 4 8 SA00 00000000h-00000FFFh | |
23 : : | |
24 SA07 00007000h-00007FFFh | |
25 | |
26 32 1 SA08 00008000h-0000FFFFh | |
27 | |
28 64 511 SA09 00010000h-0001FFFFh | |
29 : : | |
30 SA519 01FF0000h-01FFFFFFh | |
31 OLD: | |
32 1kB each header | |
33 with predive header at beginning | |
34 and postdive header with 0x400 HEADER2OFFSET | |
35 4kB (one erase) has two dives with 4 headers total | |
36 total of 512 kB (with 256 header ids (8 bit)) | |
37 Size is 280 Byte (as of 25.Nov. 2014) | |
38 | |
39 [..] Output to PC / UART is postdive header | |
40 | |
41 [..] Block Protection Lock-Down is to erase logbook only | |
42 | |
43 [..] Timing (see page 137 of LOGBOOK_V3_S25FS-S_00-271247.pdf | |
44 bulk erase is 2 minutes typ., 6 minutes max. | |
45 | |
46 ============================================================================== | |
47 ##### DEMOMODE ##### | |
48 ============================================================================== | |
49 151215: ext_flash_write_settings() is DISABLED! | |
50 | |
51 ============================================================================== | |
52 ##### bug fixes ##### | |
53 ============================================================================== | |
54 150917: end in header and length of sample was one byte too long | |
55 as stated by Jef Driesen email 15.09.2015 | |
56 | |
57 @endverbatim | |
58 ****************************************************************************** | |
59 * @attention | |
60 * | |
61 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
62 * | |
63 ****************************************************************************** | |
64 */ | |
65 | |
66 /* Includes ------------------------------------------------------------------*/ | |
67 #include "stm32f4xx_hal.h" | |
68 #include "externLogbookFlash.h" | |
69 #include "ostc.h" | |
70 #include "settings.h" | |
71 #include "gfx_engine.h" | |
72 | |
73 #ifndef BOOTLOADER_STANDALONE | |
74 #include "logbook.h" | |
75 #endif | |
76 | |
77 /* Private types -------------------------------------------------------------*/ | |
78 #define FLASHSTART 0x000000 | |
79 //#define FLASHSTOP 0x01FFFFFF all 32 MB with 4byte addressing | |
80 #define FLASHSTOP 0x00FFFFFF | |
81 //#define FLASHSTOP 0x3FFFFF | |
82 #define RELEASE 1 | |
83 #define HOLDCS 0 | |
84 | |
85 #define HEADER2OFFSET 0x400 | |
86 | |
87 typedef enum{ | |
88 EF_HEADER, | |
89 EF_SAMPLE, | |
90 EF_DEVICEDATA, | |
91 EF_VPMDATA, | |
92 EF_SETTINGS, | |
93 EF_FIRMWARE, | |
94 EF_FIRMWARE2, | |
95 }which_ring_enum; | |
96 | |
97 | |
98 typedef struct{ | |
99 uint8_t IsBusy:1; | |
100 uint8_t IsWriteEnabled:1; | |
101 uint8_t BlockProtect0:1; | |
102 uint8_t BlockProtect1:1; | |
103 uint8_t BlockProtect2:1; | |
104 uint8_t BlockProtect3:1; | |
105 uint8_t IsAutoAddressIncMode:1; | |
106 uint8_t BlockProtectL:1; | |
107 } extFlashStatusUbit8_t; | |
108 | |
109 typedef union{ | |
110 extFlashStatusUbit8_t ub; | |
111 uint8_t uw; | |
112 } extFlashStatusBit8_Type; | |
113 | |
114 | |
115 /* Exported variables --------------------------------------------------------*/ | |
116 | |
117 /* Private variables ---------------------------------------------------------*/ | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
118 static uint32_t actualAddress = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
119 static uint32_t entryPoint = 0; |
38 | 120 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
121 static uint32_t actualPointerHeader = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
122 static uint32_t actualPointerSample = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
123 static uint32_t LengthLeftSampleRead = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
124 static uint32_t actualPointerDevicedata = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
125 static uint32_t actualPointerVPM = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
126 static uint32_t actualPointerSettings = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
127 static uint32_t actualPointerFirmware = 0; |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
128 static uint32_t actualPointerFirmware2 = 0; |
38 | 129 |
130 /* Private function prototypes -----------------------------------------------*/ | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
131 static void chip_unselect(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
132 static void chip_select(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
133 static void error_led_on(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
134 static void error_led_off(void); |
38 | 135 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
136 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
137 static uint8_t read_spi(uint8_t unselect_CS_afterwards); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
138 static void write_address(uint8_t unselect_CS_afterwards); |
38 | 139 static void Error_Handler_extflash(void); |
140 static void wait_chip_not_busy(void); | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
141 static void ext_flash_incf_address(uint8_t type); |
38 | 142 //void ext_flash_incf_address_ring(void); |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
143 static void ext_flash_decf_address_ring(uint8_t type); |
38 | 144 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
145 static void ext_flash_erase4kB(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
146 static void ext_flash_erase32kB(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
147 static void ext_flash_erase64kB(void); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
148 static uint8_t ext_flash_erase_if_on_page_start(void); |
38 | 149 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
150 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase); |
38 | 151 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
152 static void ext_flash_read_block(uint8_t *getByte, uint8_t type); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
153 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
154 static void ext_flash_read_block_stop(void); |
38 | 155 |
156 static void ef_hw_rough_delay_us(uint32_t delayUs); | |
157 static void ef_erase_64K(uint32_t blocks); | |
158 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
159 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
160 |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
161 static void ext_flash_disable_protection(void); |
38 | 162 |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
163 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
164 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type); |
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
165 static void ext_flash_find_start(void); |
38 | 166 |
167 | |
168 /* Exported functions --------------------------------------------------------*/ | |
169 | |
170 void ext_flash_write_firmware(uint8_t *pSample1, uint32_t length1)//, uint8_t *pSample2, uint32_t length2) | |
171 { | |
172 general32to8_Type lengthTransform; | |
173 | |
174 lengthTransform.u32 = length1; | |
175 | |
176 actualPointerFirmware = FWSTART; | |
177 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE, 1); | |
178 ef_write_block(pSample1,length1, EF_FIRMWARE, 1); | |
179 | |
180 // if(length2) | |
181 // ef_write_block(pSample2,length2, EF_FIRMWARE, 1); | |
182 } | |
183 | |
184 uint8_t ext_flash_read_firmware_version(char *text) | |
185 { | |
186 uint32_t backup = actualAddress; | |
187 uint8_t buffer[4]; | |
188 | |
189 // + 4 for length data, see ext_flash_write_firmware | |
190 actualAddress = FWSTART + 4 + 0x10000; | |
191 ext_flash_read_block_start(); | |
192 ext_flash_read_block(&buffer[0], EF_FIRMWARE); | |
193 ext_flash_read_block(&buffer[1], EF_FIRMWARE); | |
194 ext_flash_read_block(&buffer[2], EF_FIRMWARE); | |
195 ext_flash_read_block(&buffer[3], EF_FIRMWARE); | |
196 | |
197 ext_flash_read_block_stop(); | |
198 actualAddress = backup; | |
199 | |
200 uint8_t ptr = 0; | |
201 text[ptr++] = 'V'; | |
202 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[0] & 0x3F); | |
203 text[ptr++] = '.'; | |
204 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[1] & 0x3F); | |
205 text[ptr++] = '.'; | |
206 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[2] & 0x3F); | |
207 text[ptr++] = ' '; | |
208 if(buffer[3]) | |
209 { | |
210 text[ptr++] = 'b'; | |
211 text[ptr++] = 'e'; | |
212 text[ptr++] = 't'; | |
213 text[ptr++] = 'a'; | |
214 text[ptr++] = ' '; | |
215 } | |
216 return ptr; | |
217 } | |
218 | |
219 | |
220 uint32_t ext_flash_read_firmware(uint8_t *pSample1, uint32_t max_length, uint8_t *magicByte) | |
221 { | |
222 uint32_t backup = actualAddress; | |
223 general32to8_Type lengthTransform; | |
224 | |
225 actualAddress = FWSTART; | |
226 ext_flash_read_block_start(); | |
227 | |
228 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE); | |
229 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE); | |
230 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE); | |
231 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE); | |
232 | |
233 | |
234 if(lengthTransform.u32 == 0xFFFFFFFF) | |
235 { | |
236 lengthTransform.u32 = 0xFFFFFFFF; | |
237 } | |
238 else | |
239 if(lengthTransform.u32 > max_length) | |
240 { | |
241 lengthTransform.u32 = 0xFF000000; | |
242 } | |
243 else | |
244 { | |
245 for(uint32_t i = 0; i<lengthTransform.u32; i++) | |
246 { | |
247 ext_flash_read_block(&pSample1[i], EF_FIRMWARE); | |
248 } | |
249 | |
250 } | |
251 | |
252 ext_flash_read_block_stop(); | |
253 | |
254 if(magicByte) | |
255 { | |
256 *magicByte = pSample1[0x10000 + 0x3E]; // 0x3E == 62 | |
257 } | |
258 | |
259 actualAddress = backup; | |
260 return lengthTransform.u32; | |
261 } | |
262 | |
263 | |
264 void ext_flash_write_firmware2(uint32_t offset, uint8_t *pSample1, uint32_t length1, uint8_t *pSample2, uint32_t length2) | |
265 { | |
266 general32to8_Type lengthTransform, offsetTransform; | |
267 | |
268 lengthTransform.u32 = length1 + length2; | |
269 offsetTransform.u32 = offset; | |
270 | |
271 actualPointerFirmware2 = FWSTART2; | |
272 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE2, 1); | |
273 ef_write_block(offsetTransform.u8,4, EF_FIRMWARE2, 1); | |
274 ef_write_block(pSample1,length1, EF_FIRMWARE2, 1); | |
275 if(length2) | |
276 ef_write_block(pSample2,length2, EF_FIRMWARE2, 1); | |
277 } | |
278 | |
279 | |
280 uint32_t ext_flash_read_firmware2(uint32_t *offset, uint8_t *pSample1, uint32_t max_length1, uint8_t *pSample2, uint32_t max_length2) | |
281 { | |
282 uint32_t backup = actualAddress; | |
283 uint32_t length1, length2; | |
284 general32to8_Type lengthTransform, offsetTransform; | |
285 | |
286 actualAddress = FWSTART2; | |
287 ext_flash_read_block_start(); | |
288 | |
289 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE2); | |
290 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE2); | |
291 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE2); | |
292 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE2); | |
293 | |
294 ext_flash_read_block(&offsetTransform.u8[0], EF_FIRMWARE2); | |
295 ext_flash_read_block(&offsetTransform.u8[1], EF_FIRMWARE2); | |
296 ext_flash_read_block(&offsetTransform.u8[2], EF_FIRMWARE2); | |
297 ext_flash_read_block(&offsetTransform.u8[3], EF_FIRMWARE2); | |
298 | |
299 *offset = offsetTransform.u32; | |
300 | |
301 if(lengthTransform.u32 == 0xFFFFFFFF) | |
302 { | |
303 lengthTransform.u32 = 0xFFFFFFFF; | |
304 } | |
305 else | |
306 if(lengthTransform.u32 > max_length1 + max_length2) | |
307 { | |
308 lengthTransform.u32 = 0xFF000000; | |
309 } | |
310 else | |
311 { | |
312 if(lengthTransform.u32 < max_length1) | |
313 { | |
314 length1 = lengthTransform.u32; | |
315 length2 = 0; | |
316 } | |
317 else | |
318 { | |
319 length1 = max_length1; | |
320 length2 = lengthTransform.u32 - max_length1; | |
321 } | |
322 | |
323 if(pSample1) | |
324 { | |
325 for(uint32_t i = 0; i<length1; i++) | |
326 { | |
327 ext_flash_read_block(&pSample1[i], EF_FIRMWARE2); | |
328 } | |
329 if(pSample2) | |
330 { | |
331 for(uint32_t i = 0; i<length2; i++) | |
332 { | |
333 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
334 } | |
335 } | |
336 } | |
337 else if(pSample2) | |
338 { | |
339 actualAddress += length1; | |
340 for(uint32_t i = 0; i<length2; i++) | |
341 { | |
342 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
343 } | |
344 } | |
345 } | |
346 ext_flash_read_block_stop(); | |
347 actualAddress = backup; | |
348 return lengthTransform.u32; | |
349 } | |
350 | |
351 | |
352 void ext_flash_read_fixed_16_devicedata_blocks_formated_128byte_total(uint8_t *buffer) | |
353 { | |
354 SDeviceLine data[16]; | |
355 uint8_t tempLengthIngnore; | |
356 uint16_t count; | |
357 uint8_t transfer; | |
358 | |
359 RTC_DateTypeDef Sdate; | |
360 RTC_TimeTypeDef Stime; | |
361 | |
362 actualAddress = DDSTART; | |
363 | |
364 ext_flash_read_block_start(); | |
365 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
366 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
367 | |
368 ext_flash_read_block_multi((uint8_t *)data,16*3*4, EF_DEVICEDATA); | |
369 ext_flash_read_block_stop(); | |
370 | |
371 count = 0; | |
372 for(int i=0;i<16;i++) | |
373 { | |
374 transfer = (data[i].value_int32 >> 24) & 0xFF; | |
375 buffer[count++] = transfer; | |
376 transfer = (data[i].value_int32 >> 16) & 0xFF; | |
377 buffer[count++] = transfer; | |
378 transfer = (data[i].value_int32 >> 8) & 0xFF; | |
379 buffer[count++] = transfer; | |
380 transfer = (data[i].value_int32) & 0xFF; | |
381 buffer[count++] = transfer; | |
382 | |
383 translateDate(data[i].date_rtc_dr, &Sdate); | |
384 translateTime(data[i].time_rtc_tr, &Stime); | |
385 buffer[count++] = Sdate.Year; | |
386 buffer[count++] = Sdate.Month; | |
387 buffer[count++] = Sdate.Date; | |
388 buffer[count++] = Stime.Hours; | |
389 } | |
390 } | |
391 | |
392 | |
393 #ifndef BOOTLOADER_STANDALONE | |
394 | |
395 void ext_flash_write_devicedata(void) | |
396 { | |
397 uint8_t *pData; | |
398 const uint16_t length = sizeof(SDevice); | |
399 uint8_t length_lo, length_hi; | |
400 uint8_t dataLength[2] = { 0 }; | |
401 | |
402 ext_flash_disable_protection(); | |
403 | |
404 pData = (uint8_t *)stateDeviceGetPointer(); | |
405 | |
406 actualPointerDevicedata = DDSTART; | |
407 | |
408 length_lo = (uint8_t)(length & 0xFF); | |
409 length_hi = (uint8_t)(length >> 8); | |
410 dataLength[0] = length_lo; | |
411 dataLength[1] = length_hi; | |
412 | |
413 ef_write_block(dataLength,2, EF_DEVICEDATA, 0); | |
414 ef_write_block(pData,length, EF_DEVICEDATA, 0); | |
415 } | |
416 | |
417 | |
418 uint16_t ext_flash_read_devicedata(uint8_t *buffer, uint16_t max_length) | |
419 { | |
420 uint16_t length; | |
421 uint8_t length_lo, length_hi; | |
422 | |
423 actualAddress = DDSTART; | |
424 | |
425 ext_flash_read_block_start(); | |
426 ext_flash_read_block(&length_lo, EF_DEVICEDATA); | |
427 ext_flash_read_block(&length_hi, EF_DEVICEDATA); | |
428 | |
429 length = (length_hi * 256) + length_lo; | |
430 | |
431 if(length > max_length) | |
432 return 0; | |
433 | |
434 ext_flash_read_block_multi(buffer,length,EF_DEVICEDATA); | |
435 ext_flash_read_block_stop(); | |
436 | |
437 return length; | |
438 } | |
439 | |
440 | |
441 void ext_flash_write_vpm(SVpm *vpmInput) | |
442 { | |
443 uint8_t *pData; | |
444 const uint16_t length = sizeof(SVpm); | |
445 | |
446 uint8_t length_lo, length_hi; | |
447 uint8_t dataLength[2] = { 0 }; | |
448 | |
449 pData = (uint8_t *)vpmInput; | |
450 | |
451 actualPointerVPM = VPMSTART; | |
452 | |
453 length_lo = (uint8_t)(length & 0xFF); | |
454 length_hi = (uint8_t)(length >> 8); | |
455 dataLength[0] = length_lo; | |
456 dataLength[1] = length_hi; | |
457 | |
458 ef_write_block(dataLength,2, EF_VPMDATA, 0); | |
459 ef_write_block(pData,length, EF_VPMDATA, 0); | |
460 } | |
461 | |
462 | |
463 int ext_flash_read_vpm(SVpm *vpmOutput) | |
464 { | |
465 uint8_t *pData; | |
466 const uint16_t length = sizeof(SVpm); | |
467 uint8_t length_lo, length_hi; | |
468 int output; | |
469 | |
470 actualAddress = VPMSTART; | |
471 | |
472 ext_flash_read_block_start(); | |
473 ext_flash_read_block(&length_lo, EF_VPMDATA); | |
474 ext_flash_read_block(&length_hi, EF_VPMDATA); | |
475 if((length_lo == (uint8_t)(length & 0xFF)) | |
476 &&(length_hi == (uint8_t)(length >> 8))) | |
477 { | |
478 pData = (uint8_t *)vpmOutput; | |
479 for(uint16_t i = 0; i < length; i++) | |
480 ext_flash_read_block(&pData[i], EF_VPMDATA); | |
481 output = length; | |
482 } | |
483 else | |
484 output = 0; | |
485 | |
486 ext_flash_read_block_stop(); | |
487 return output; | |
488 } | |
489 | |
490 #ifdef DEMOMODE | |
491 void ext_flash_write_settings(void) | |
492 { | |
493 return; | |
494 } | |
495 #else | |
496 void ext_flash_write_settings(void) | |
497 { | |
498 uint8_t *pData; | |
499 const uint16_t length = sizeof(SSettings); | |
500 uint8_t length_lo, length_hi; | |
501 uint8_t dataLength[2] = { 0 }; | |
502 | |
503 ext_flash_disable_protection(); | |
504 | |
505 if(stateRealGetPointer()->lastKnownBatteryPercentage) | |
506 { | |
507 settingsGetPointer()->lastKnownBatteryPercentage = stateRealGetPointer()->lastKnownBatteryPercentage; | |
508 } | |
509 settingsGetPointer()->backup_localtime_rtc_tr = stateRealGetPointer()->lifeData.timeBinaryFormat; | |
510 settingsGetPointer()->backup_localtime_rtc_dr = stateRealGetPointer()->lifeData.dateBinaryFormat; | |
511 | |
512 pData = (uint8_t *)settingsGetPointer(); | |
513 | |
514 actualPointerSettings = SETTINGSSTART; | |
515 | |
516 length_lo = (uint8_t)(length & 0xFF); | |
517 length_hi = (uint8_t)(length >> 8); | |
518 dataLength[0] = length_lo; | |
519 dataLength[1] = length_hi; | |
520 | |
521 ef_write_block(dataLength,2, EF_SETTINGS, 0); | |
522 ef_write_block(pData,length, EF_SETTINGS, 0); | |
523 // ext_flash_enable_protection(); | |
524 } | |
525 #endif | |
526 | |
527 | |
528 /* CHANGES 150929 hw | |
529 * this now allows to read old settings too | |
530 * but make sure that everything is fixed in | |
531 * set_new_settings_missing_in_ext_flash | |
532 * new settings should be fine as they are added | |
533 * and loaded before calling this function | |
534 */ | |
535 uint8_t ext_flash_read_settings(void) | |
536 { | |
537 uint8_t returnValue = HAL_BUSY; | |
538 uint8_t *pData; | |
539 const uint16_t lengthStandardNow = sizeof(SSettings); | |
540 uint8_t length_lo, length_hi; | |
541 uint16_t lengthOnEEPROM; | |
542 uint32_t header; | |
543 SSettings *pSettings = settingsGetPointer(); | |
544 | |
545 actualAddress = SETTINGSSTART; | |
546 | |
547 ext_flash_read_block_start(); | |
548 ext_flash_read_block(&length_lo, EF_SETTINGS); | |
549 ext_flash_read_block(&length_hi, EF_SETTINGS); | |
550 | |
551 lengthOnEEPROM = length_hi * 256; | |
552 lengthOnEEPROM += length_lo; | |
553 if(lengthOnEEPROM <= lengthStandardNow) | |
554 { | |
555 ext_flash_read_block_multi(&header, 4, EF_SETTINGS); | |
556 if((header <= pSettings->header) && (header >= pSettings->updateSettingsAllowedFromHeader)) | |
557 { | |
558 returnValue = HAL_OK; | |
559 pSettings->header = header; | |
560 pData = (uint8_t *)pSettings + 4; /* header */ | |
561 for(uint16_t i = 0; i < (lengthOnEEPROM-4); i++) | |
562 ext_flash_read_block(&pData[i], EF_SETTINGS); | |
563 } | |
564 else | |
565 { | |
566 returnValue = HAL_ERROR; | |
567 } | |
568 } | |
569 ext_flash_read_block_stop(); | |
570 return returnValue; | |
571 } | |
572 | |
573 | |
574 | |
575 | |
576 /* ext_flash_start_new_dive_log_and_set_actualPointerSample | |
577 * prepares the write sample pointer | |
578 * to be used by ext_flash_write_sample() | |
579 * to be set in the * pHeaderPreDive | |
580 * for write with ext_flash_create_new_dive_log() and ext_flash_close_new_dive_log() | |
581 */ | |
582 void ext_flash_start_new_dive_log_and_set_actualPointerSample(uint8_t *pHeaderPreDive) | |
583 { | |
584 convert_Type data; | |
585 SSettings *settings = settingsGetPointer(); | |
586 | |
587 /* new 5. Jan. 2015 */ | |
588 actualPointerSample = settings->logFlashNextSampleStartAddress; | |
589 | |
590 if(!ext_flash_test_remaining_space_of_page_empty(actualPointerSample, 4)) | |
591 ext_flash_set_to_begin_of_next_page(&actualPointerSample, EF_SAMPLE); | |
592 | |
593 if((actualPointerSample < SAMPLESTART) || (actualPointerSample > SAMPLESTOP)) | |
594 actualPointerSample = SAMPLESTART; | |
595 | |
596 data.u32bit = actualPointerSample; | |
597 pHeaderPreDive[2] = data.u8bit.byteLow; | |
598 pHeaderPreDive[3] = data.u8bit.byteMidLow; | |
599 pHeaderPreDive[4] = data.u8bit.byteMidHigh; | |
600 /* to start sample writing and header etc. pp. */ | |
601 ext_flash_disable_protection_for_logbook(); | |
602 } | |
603 | |
604 | |
605 /* ext_flash_create_new_dive_log | |
606 * uses the first header without HEADER2OFFSET | |
607 * for the header it is not important to be complete | |
608 * and can be reconstructed | |
609 * ext_flash_start_new_dive_log_and_set_actualPointerSample() | |
610 * has to be called before to set the actualPointerSample | |
611 * in the header | |
612 * the following func writes to header to the ext_flash | |
613 */ | |
614 void ext_flash_create_new_dive_log(uint8_t *pHeaderPreDive) | |
615 { | |
616 SSettings *settings; | |
617 uint8_t id, id_next; | |
618 uint8_t header1, header2; | |
619 | |
620 settings = settingsGetPointer(); | |
621 id = settings->lastDiveLogId; | |
622 | |
623 actualAddress = HEADERSTART + (0x800 * id); | |
624 ext_flash_read_block_start(); | |
625 ext_flash_read_block(&header1, EF_SAMPLE); | |
626 ext_flash_read_block(&header2, EF_SAMPLE); | |
627 ext_flash_read_block_stop(); | |
628 | |
629 if((header1 == 0xFA) && (header2 == 0xFA)) | |
630 { | |
631 id += 1; /* 0-255, auto rollover */ | |
632 if(id & 1) | |
633 { | |
634 actualAddress = HEADERSTART + (0x800 * id); | |
635 ext_flash_read_block_start(); | |
636 ext_flash_read_block(&header1, EF_SAMPLE); | |
637 ext_flash_read_block(&header2, EF_SAMPLE); | |
638 ext_flash_read_block_stop(); | |
639 if((header1 == 0xFA) && (header2 == 0xFA)) | |
640 id += 1; | |
641 } | |
642 } | |
643 else | |
644 { | |
645 id = 0; | |
646 } | |
647 | |
648 /* delete next header */ | |
649 id_next = id + 1; | |
650 actualPointerHeader = HEADERSTART + (0x800 * id_next); | |
651 ef_write_block(0,0, EF_HEADER, 0); | |
652 | |
653 settings->lastDiveLogId = id; | |
654 actualPointerHeader = HEADERSTART + (0x800 * id); | |
655 | |
656 if(pHeaderPreDive != 0) | |
657 ef_write_block(pHeaderPreDive,HEADERSIZE, EF_HEADER, 0); | |
658 } | |
659 | |
660 | |
661 void ext_flash_close_new_dive_log(uint8_t *pHeaderPostDive ) | |
662 { | |
663 SSettings * settings = settingsGetPointer(); | |
664 uint8_t id; | |
665 convert_Type startAddress; | |
666 convert_Type data; | |
667 uint32_t backup; | |
668 | |
669 uint8_t sampleData[3]; | |
670 actualAddress = actualPointerSample; | |
671 sampleData[0] = 0xFD; | |
672 sampleData[1] = 0xFD; | |
673 ext_flash_write_sample(sampleData, 2); | |
674 | |
675 /* end of sample data, pointing to the last sample 0xFD | |
676 */ | |
677 actualAddress = actualPointerSample; // change hw 17.09.2015 | |
678 ext_flash_decf_address_ring(EF_SAMPLE); // 17.09.2015: this decf actualAddress only!! | |
679 actualPointerSample = actualAddress; // change hw 17.09.2015 | |
680 data.u32bit = actualPointerSample; | |
681 | |
682 pHeaderPostDive[5] = data.u8bit.byteLow; | |
683 pHeaderPostDive[6] = data.u8bit.byteMidLow; | |
684 pHeaderPostDive[7] = data.u8bit.byteMidHigh; | |
685 | |
686 /* take data written before, calculate length and write | |
687 SLogbookHeader has different order: length (byte# 8,9,10) prior to profile version (byte# 11) | |
688 */ | |
689 startAddress.u8bit.byteLow = pHeaderPostDive[2]; | |
690 startAddress.u8bit.byteMidLow = pHeaderPostDive[3]; | |
691 startAddress.u8bit.byteMidHigh = pHeaderPostDive[4]; | |
692 startAddress.u8bit.byteHigh = 0; | |
693 | |
694 if(startAddress.u32bit < actualPointerSample) | |
695 data.u32bit = 1 + actualPointerSample - startAddress.u32bit; | |
696 else | |
697 data.u32bit = 2 + (actualPointerSample - SAMPLESTART) + (SAMPLESTOP - startAddress.u32bit); | |
698 | |
699 pHeaderPostDive[8] = data.u8bit.byteLow; | |
700 pHeaderPostDive[9] = data.u8bit.byteMidLow; | |
701 pHeaderPostDive[10] = data.u8bit.byteMidHigh; | |
702 | |
703 /* set id and write post-dive-header | |
704 */ | |
705 id = settings->lastDiveLogId; | |
706 actualPointerHeader = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
707 | |
708 ef_write_block(pHeaderPostDive,HEADERSIZE, EF_HEADER, 0); | |
709 | |
710 /* write length at beginning of sample | |
711 and write proper beginning for next dive to actualPointerSample | |
712 */ | |
713 backup = actualPointerSample; | |
714 actualPointerSample = startAddress.u32bit; // is still 0xFF | |
715 sampleData[0] = data.u8bit.byteLow; | |
716 sampleData[1] = data.u8bit.byteMidLow; | |
717 sampleData[2] = data.u8bit.byteMidHigh; | |
718 ext_flash_overwrite_sample_without_erase(sampleData, 3); | |
719 | |
720 actualAddress = backup; | |
721 ext_flash_incf_address(EF_SAMPLE); | |
722 actualPointerSample = actualAddress; | |
723 ext_flash_enable_protection(); | |
724 } | |
725 | |
726 | |
727 void ext_flash_write_sample(uint8_t *pSample, uint16_t length) | |
728 { | |
729 ef_write_block(pSample,length, EF_SAMPLE, 0); | |
730 | |
731 SSettings *settings = settingsGetPointer(); | |
732 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
733 } | |
734 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
735 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length) |
38 | 736 { |
737 ef_write_block(pSample,length, EF_SAMPLE, 1); | |
738 } | |
739 | |
740 | |
741 uint8_t ext_flash_count_dive_headers(void) | |
742 { | |
743 uint8_t id = 0; | |
744 uint8_t counter = 0; | |
745 uint16_t headerStartData = 0x0000; | |
746 | |
747 id = settingsGetPointer()->lastDiveLogId; | |
748 | |
749 do | |
750 { | |
751 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
752 ext_flash_read_block_start(); | |
753 ext_flash_read_block_multi((uint8_t *)&headerStartData, 2, EF_HEADER); | |
754 ext_flash_read_block_stop(); | |
755 counter++; | |
756 id -=1; | |
757 } while((headerStartData == 0xFAFA) && (counter < 255)); | |
758 return (counter - 1); | |
759 } | |
760 | |
761 | |
762 void ext_flash_read_dive_header(uint8_t *pHeaderToFill, uint8_t StepBackwards) | |
763 { | |
764 SSettings *settings; | |
765 uint8_t id; | |
766 uint16_t i; | |
767 | |
768 settings = settingsGetPointer(); | |
769 id = settings->lastDiveLogId; | |
770 id -= StepBackwards; /* 0-255, auto rollover */ | |
771 | |
772 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
773 ext_flash_read_block_start(); | |
774 for(i = 0; i < HEADERSIZE; i++) | |
775 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
776 ext_flash_read_block_stop(); | |
777 | |
778 } | |
779 | |
780 void ext_flash_read_dive_header2(uint8_t *pHeaderToFill, uint8_t id, _Bool bOffset) | |
781 { | |
782 | |
783 uint16_t i; | |
784 actualAddress = HEADERSTART + (0x800 * id) ; | |
785 | |
786 if(bOffset) | |
787 actualAddress += HEADER2OFFSET; | |
788 ext_flash_read_block_start(); | |
789 for(i = 0; i < HEADERSIZE; i++) | |
790 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
791 ext_flash_read_block_stop(); | |
792 } | |
793 | |
794 | |
795 uint32_t ext_flash_read_dive_raw_with_double_header_1K(uint8_t *data, uint32_t max_size, uint8_t StepBackwards) | |
796 { | |
797 if(max_size < 0x800) | |
798 return 0; | |
799 | |
800 uint8_t id; | |
801 convert_Type dataStart, dataEnd; | |
802 uint32_t LengthAll = 0; | |
803 | |
804 id = settingsGetPointer()->lastDiveLogId; | |
805 id -= StepBackwards; /* 0-255, auto rollover */ | |
806 | |
807 // clear data | |
808 for(int i=0;i<0x800;i++) | |
809 data[i] = 0xFF; | |
810 | |
811 // copy primary/pre-dive | |
812 actualAddress = HEADERSTART + (0x800 * id); | |
813 ext_flash_read_block_start(); | |
814 for(int i = 0; i < HEADERSIZE; i++) | |
815 ext_flash_read_block(&data[i], EF_HEADER); | |
816 ext_flash_read_block_stop(); | |
817 | |
818 // copy main/secondary/post-dive | |
819 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
820 ext_flash_read_block_start(); | |
821 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
822 ext_flash_read_block(&data[i], EF_HEADER); | |
823 ext_flash_read_block_stop(); | |
824 | |
825 // data | |
826 | |
827 dataStart.u8bit.byteHigh = 0; | |
828 dataStart.u8bit.byteLow = data[0x402]; | |
829 dataStart.u8bit.byteMidLow = data[0x403]; | |
830 dataStart.u8bit.byteMidHigh = data[0x404]; | |
831 | |
832 dataEnd.u8bit.byteHigh = 0; | |
833 dataEnd.u8bit.byteLow = data[0x405]; | |
834 dataEnd.u8bit.byteMidLow = data[0x406]; | |
835 dataEnd.u8bit.byteMidHigh = data[0x407]; | |
836 | |
837 actualPointerSample = dataStart.u32bit; | |
838 if(dataEnd.u32bit >= dataStart.u32bit) | |
839 LengthAll = 1 + dataEnd.u32bit - dataStart.u32bit; | |
840 else | |
841 LengthAll = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
842 | |
843 LengthAll += 0x800; | |
844 | |
845 if(LengthAll > max_size) | |
846 return 0x800; | |
847 | |
848 actualAddress = actualPointerSample; | |
849 ext_flash_read_block_start(); | |
850 for(uint32_t i = 0x800; i < LengthAll; i++) | |
851 ext_flash_read_block(&data[i], EF_SAMPLE); | |
852 ext_flash_read_block_stop(); | |
853 return LengthAll; | |
854 } | |
855 | |
856 void ext_flash_write_dive_raw_with_double_header_1K(uint8_t *data, uint32_t length) | |
857 { | |
858 convert_Type dataStart, dataEnd; | |
859 SLogbookHeader headerTemp; | |
860 | |
861 // set actualPointerSample and get pointer to sample storage and disable flash write protect | |
862 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t *)&headerTemp); | |
863 | |
864 dataStart.u8bit.byteHigh = 0; | |
865 dataStart.u8bit.byteLow = headerTemp.pBeginProfileData[0]; | |
866 dataStart.u8bit.byteMidLow = headerTemp.pBeginProfileData[1]; | |
867 dataStart.u8bit.byteMidHigh = headerTemp.pBeginProfileData[2]; | |
868 | |
869 dataEnd.u32bit = dataStart.u32bit + length - 0x801; | |
870 if(dataEnd.u32bit > SAMPLESTOP) | |
871 dataEnd.u32bit -= SAMPLESTOP + SAMPLESTART - 1; | |
872 | |
873 data[0x002] = data[0x402] = dataStart.u8bit.byteLow; | |
874 data[0x003] = data[0x403] = dataStart.u8bit.byteMidLow; | |
875 data[0x004] = data[0x404] = dataStart.u8bit.byteMidHigh; | |
876 data[0x005] = data[0x405] = dataEnd.u8bit.byteLow; | |
877 data[0x006] = data[0x406] = dataEnd.u8bit.byteMidLow; | |
878 data[0x007] = data[0x407] = dataEnd.u8bit.byteMidHigh; | |
879 | |
880 // set actualPointerHeader to next free header and update lastDiveLogId | |
881 ext_flash_create_new_dive_log(0); | |
882 | |
883 // copy header data | |
884 ef_write_block(data,0x800,EF_HEADER, 1); | |
885 | |
886 // copy sample data | |
887 ef_write_block(&data[0x800], length-0x800, EF_SAMPLE, 1); | |
888 | |
889 // update logFlashNextSampleStartAddress | |
890 settingsGetPointer()->logFlashNextSampleStartAddress = actualPointerSample; | |
891 } | |
892 | |
893 | |
894 // =============================================================================== | |
895 // ext_flash_read_header_memory | |
896 /// @brief This function returns the entire header space 1:1 | |
897 /// @date 04-April-2016 | |
898 /// | |
899 /// @param *data 256KB output | |
900 // =============================================================================== | |
901 void ext_flash_read_header_memory(uint8_t *data) | |
902 { | |
903 actualAddress = HEADERSTART; | |
904 actualPointerHeader = actualAddress; | |
905 ext_flash_read_block_start(); | |
906 for(int i=0;i<8;i++) | |
907 ext_flash_read_block_multi(&data[0x8000 * i], 0x8000, EF_HEADER); | |
908 ext_flash_read_block_stop(); | |
909 } | |
910 | |
911 | |
912 // =============================================================================== | |
913 // ext_flash_read_header_memory | |
914 /// @brief This function erases and overwrites the entire logbook header block | |
915 /// @date 04-April-2016 | |
916 /// | |
917 /// @param *data 256KB input of header memory 1:1 | |
918 // =============================================================================== | |
919 void ext_flash_write_header_memory(uint8_t *data) | |
920 { | |
921 actualAddress = HEADERSTART; | |
922 actualPointerHeader = actualAddress; | |
923 ef_write_block(data, 0x40000, EF_HEADER, 0); | |
924 } | |
925 | |
926 | |
927 void ext_flash_open_read_sample(uint8_t StepBackwards, uint32_t *totalNumberOfBytes) | |
928 { | |
929 SSettings *settings = settingsGetPointer(); | |
930 uint8_t id; | |
931 convert_Type dataStart, dataEnd; | |
932 uint8_t header1, header2; | |
933 | |
934 id = settings->lastDiveLogId; | |
935 id -= StepBackwards; /* 0-255, auto rollover */ | |
936 # | |
937 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
938 actualPointerHeader = actualAddress; | |
939 | |
940 ext_flash_read_block_start(); | |
941 /* little endian */ | |
942 ext_flash_read_block(&header1, EF_HEADER); | |
943 ext_flash_read_block(&header2, EF_HEADER); | |
944 dataStart.u8bit.byteHigh = 0; | |
945 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
946 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
947 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
948 dataEnd.u8bit.byteHigh = 0; | |
949 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
950 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
951 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
952 ext_flash_read_block_stop(); | |
953 | |
954 actualPointerSample = dataStart.u32bit; | |
955 if(dataEnd.u32bit >= dataStart.u32bit) | |
956 LengthLeftSampleRead = 1 + dataEnd.u32bit - dataStart.u32bit; | |
957 else | |
958 LengthLeftSampleRead = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
959 *totalNumberOfBytes = LengthLeftSampleRead; | |
960 | |
961 actualAddress = actualPointerSample; | |
962 ext_flash_read_block_start(); | |
963 } | |
964 | |
965 | |
966 void ext_flash_read_next_sample_part(uint8_t *pSample, uint8_t length) | |
967 { | |
968 for(uint16_t i = 0; i < length; i++) | |
969 ext_flash_read_block(&pSample[i], EF_SAMPLE); | |
970 } | |
971 | |
972 | |
973 void ext_flash_close_read_sample(void) | |
974 { | |
975 actualPointerSample = actualAddress; | |
976 ext_flash_read_block_stop(); | |
977 } | |
978 | |
979 | |
980 void ext_flash_set_entry_point(void) | |
981 { | |
982 entryPoint = actualAddress; | |
983 } | |
984 | |
985 | |
986 void ext_flash_reopen_read_sample_at_entry_point(void) | |
987 { | |
988 error_led_on(); | |
989 chip_unselect(); | |
990 wait_chip_not_busy(); | |
991 | |
992 actualAddress = entryPoint; | |
993 ext_flash_read_block_start(); | |
994 error_led_off(); | |
995 } | |
996 | |
997 /* | |
998 uint8_t ext_flash_point_to_64k_block_in_headerSpace(uint8_t logId) | |
999 { | |
1000 uint32_t pointerToData = logId * 0x800; | |
1001 | |
1002 return pointerToData / 0x10000; | |
1003 } | |
1004 */ | |
1005 | |
1006 | |
1007 // =============================================================================== | |
1008 // ext_flash_repair_dive_numbers_starting_count_helper | |
1009 /// @brief | |
1010 /// @date 22-June-2016 | |
1011 | |
1012 // =============================================================================== | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1013 static uint16_t ext_flash_repair_dive_numbers_starting_count_helper(uint8_t *data, uint8_t *change64k, uint16_t startNumber, uint8_t lastLogId) |
38 | 1014 { |
1015 const uint32_t headerStep = 0x800; | |
1016 uint8_t actualLogId = 0; | |
1017 uint16_t oldNumber = 0; | |
1018 uint16_t actualNumber = 0; | |
1019 SLogbookHeader *ptrLogbookHeader = 0; | |
1020 | |
1021 if(startNumber == 0) | |
1022 return 0; | |
1023 | |
1024 actualNumber = startNumber - 1; | |
1025 | |
282 | 1026 // where is the oldest dive (Which is now getting startNumber) |
38 | 1027 // use first header for ease (without HEADER2OFFSET for end of dive header) |
1028 // compare for lastLogId to prevent endless loop | |
1029 | |
1030 if(*(uint16_t*)&data[lastLogId * headerStep] != 0xFAFA) | |
1031 return 0; | |
1032 | |
1033 actualLogId = lastLogId - 1; | |
1034 while((*(uint16_t*)&data[actualLogId * headerStep] == 0xFAFA) && (actualLogId != lastLogId)) | |
1035 { | |
1036 actualLogId--; | |
1037 } | |
1038 | |
1039 // now pointing to one behind the last | |
1040 while(actualLogId != lastLogId) | |
1041 { | |
1042 actualLogId++; | |
1043 actualNumber++; | |
1044 ptrLogbookHeader = (SLogbookHeader *)&data[actualLogId * headerStep]; | |
1045 | |
1046 oldNumber = ptrLogbookHeader->diveNumber; | |
1047 if(oldNumber != actualNumber) | |
1048 { | |
1049 // change64k[ext_flash_point_to_64k_block_in_headerSpace(actualLogId )] = 1; | |
1050 change64k[(actualLogId * 0x800)/0x10000] = 1; | |
1051 ptrLogbookHeader->diveNumber = actualNumber; | |
1052 ptrLogbookHeader = (SLogbookHeader *)(&data[actualLogId * headerStep] + HEADER2OFFSET); | |
1053 ptrLogbookHeader->diveNumber = actualNumber; | |
1054 } | |
1055 } | |
1056 | |
1057 return actualNumber; | |
1058 } | |
1059 | |
1060 // =============================================================================== | |
1061 // ext_flash_repair_SPECIAL_dive_numbers_starting_count_with | |
1062 /// @brief This function | |
1063 /// @date 04-April-2016 | |
282 | 1064 /// problem (160621): 64K blocks (32 dives) in the new flash memory chip |
1065 /// This block needs to be deleted | |
1066 /// these where only 4KB block before | |
38 | 1067 /// @output endCount, last diveNumber |
1068 | |
1069 // =============================================================================== | |
1070 uint16_t ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) | |
1071 { | |
1072 uint32_t logCopyDataPtr = 0; | |
1073 uint8_t *data; | |
1074 uint16_t lastCount; | |
282 | 1075 uint8_t listOfChanged64kBlocks[8]; // 32 dives each 64K |
38 | 1076 |
1077 logCopyDataPtr = getFrame(97); | |
1078 data = (uint8_t *)logCopyDataPtr; | |
1079 | |
1080 for(int i=0;i<8;i++) | |
1081 listOfChanged64kBlocks[i] = 0; | |
1082 | |
1083 actualAddress = HEADERSTART; | |
1084 ext_flash_read_block_start(); | |
1085 ext_flash_read_block_multi(data,0x100000,EF_HEADER); | |
1086 ext_flash_read_block_stop(); | |
1087 | |
1088 lastCount = ext_flash_repair_dive_numbers_starting_count_helper(data, listOfChanged64kBlocks, startCount, settingsGetPointer()->lastDiveLogId); | |
1089 | |
1090 for(int i=0;i<8;i++) | |
1091 { | |
1092 if(listOfChanged64kBlocks[i] != 0) | |
1093 { | |
1094 actualPointerHeader = HEADERSTART + (i * 0x10000); | |
1095 ef_write_block(&data[i * 0x10000], 0x10000, EF_HEADER, 0); | |
1096 } | |
1097 } | |
1098 | |
1099 releaseFrame(97,logCopyDataPtr); | |
1100 if(settingsGetPointer()->totalDiveCounter < lastCount) | |
1101 { | |
1102 settingsGetPointer()->totalDiveCounter = lastCount; | |
1103 } | |
1104 return lastCount; | |
1105 } | |
1106 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1107 /* |
38 | 1108 void OLD_ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) |
1109 { | |
1110 uint16_t counterStorage[256]; | |
1111 uint8_t start = 0xFF; | |
1112 uint32_t logCopyDataPtr = 0; | |
1113 uint8_t *data; | |
1114 uint8_t startAbsolute = 0; | |
1115 int16_t count = 0; | |
1116 _Bool repair = 0; | |
1117 uint8_t startBackup = 0; | |
1118 | |
1119 SLogbookHeader tempLogbookHeader; | |
1120 SLogbookHeader *ptrHeaderInData1a; | |
1121 SLogbookHeader *ptrHeaderInData1b; | |
1122 SLogbookHeader *ptrHeaderInData2a; | |
1123 SLogbookHeader *ptrHeaderInData2b; | |
1124 | |
1125 logCopyDataPtr = getFrame(97); | |
1126 data = (uint8_t *)logCopyDataPtr; | |
1127 ptrHeaderInData1a = (SLogbookHeader *)logCopyDataPtr; | |
1128 ptrHeaderInData1b = (SLogbookHeader *)(logCopyDataPtr + HEADER2OFFSET); | |
1129 ptrHeaderInData2a = (SLogbookHeader *)(logCopyDataPtr + 0x800); | |
1130 ptrHeaderInData2b = (SLogbookHeader *)(logCopyDataPtr + 0x800 + HEADER2OFFSET); | |
1131 | |
1132 // get data | |
1133 for(int StepBackwards = 0; StepBackwards < 255; StepBackwards++) | |
1134 { | |
1135 logbook_getHeader(StepBackwards, &tempLogbookHeader); | |
1136 counterStorage[StepBackwards+1] = tempLogbookHeader.diveNumber; | |
1137 if(tempLogbookHeader.diveHeaderStart == 0xFAFA) | |
1138 start = StepBackwards; | |
1139 else | |
1140 break; | |
1141 } | |
1142 | |
1143 if(start == 0xFF) | |
1144 return; | |
1145 | |
1146 count = start + 1; | |
1147 startAbsolute = settingsGetPointer()->lastDiveLogId; | |
1148 | |
1149 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1150 |
38 | 1151 if(start%2) |
1152 { | |
1153 if(counterStorage[start] != startCount) | |
1154 { | |
1155 // clear data | |
1156 for(int i=0;i<0x800*2;i++) | |
1157 data[i] = 0xFF; | |
1158 | |
1159 uint8_t id = settingsGetPointer()->lastDiveLogId; | |
1160 id -= start; // 0-255, auto rollover | |
1161 | |
1162 // copy primary/pre-dive | |
1163 actualAddress = HEADERSTART + (0x800 * id); | |
1164 ext_flash_read_block_start(); | |
1165 for(int i = 0; i < HEADERSIZE; i++) | |
1166 ext_flash_read_block(&data[i], EF_HEADER); | |
1167 ext_flash_read_block_stop(); | |
1168 | |
1169 // copy main/secondary/post-dive | |
1170 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
1171 ext_flash_read_block_start(); | |
1172 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
1173 ext_flash_read_block(&data[i], EF_HEADER); | |
1174 ext_flash_read_block_stop(); | |
1175 | |
1176 // repair | |
1177 ptrHeaderInData2a->diveNumber = startCount; | |
1178 ptrHeaderInData2b->diveNumber = startCount; | |
1179 startCount++; | |
1180 | |
1181 // write | |
1182 actualAddress = HEADERSTART + (0x800 * (id-1)); | |
1183 ef_write_block(data,0x800*2,EF_HEADER, 0); | |
1184 } | |
1185 start--; | |
1186 } | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1187 |
38 | 1188 // for(int count = start; count > -1; count -= 2) |
1189 | |
1190 while(count > 0) | |
1191 { | |
1192 // clear data | |
1193 for(int i=0;i<0x1000;i++) | |
1194 data[i] = 0xFF; | |
1195 | |
1196 repair = 0; | |
1197 | |
1198 startBackup = startAbsolute; | |
1199 | |
1200 if(startAbsolute%2) // 0x800 to 0x1000 | |
1201 { | |
1202 // copy second pre-dive | |
1203 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
1204 ext_flash_read_block_start(); | |
1205 for(int i = 0x800; i < HEADERSIZE+0x800; i++) | |
1206 ext_flash_read_block(&data[i], EF_HEADER); | |
1207 ext_flash_read_block_stop(); | |
1208 | |
1209 // copy second post-dive | |
1210 actualAddress = HEADERSTART + HEADER2OFFSET + (0x800 * startAbsolute); | |
1211 ext_flash_read_block_start(); | |
1212 for(int i = 0xC00; i < HEADERSIZE+0xC00; i++) | |
1213 ext_flash_read_block(&data[i], EF_HEADER); | |
1214 ext_flash_read_block_stop(); | |
1215 | |
1216 if(counterStorage[count] != startCount) | |
1217 { | |
1218 ptrHeaderInData2a->diveNumber = startCount; | |
1219 ptrHeaderInData2b->diveNumber = startCount; | |
1220 repair = 1; | |
1221 } | |
1222 startCount += 1; | |
1223 | |
1224 startAbsolute -= 1; | |
1225 count -= 1; | |
1226 | |
1227 if(count > 0) | |
1228 { | |
1229 // copy first pre-dive | |
1230 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
1231 ext_flash_read_block_start(); | |
1232 for(int i = 0; i < HEADERSIZE; i++) | |
1233 ext_flash_read_block(&data[i], EF_HEADER); | |
1234 ext_flash_read_block_stop(); | |
1235 | |
1236 // copy first post-dive | |
1237 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
1238 ext_flash_read_block_start(); | |
1239 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
1240 ext_flash_read_block(&data[i], EF_HEADER); | |
1241 ext_flash_read_block_stop(); | |
1242 | |
1243 if(counterStorage[count] != startCount) | |
1244 { | |
1245 ptrHeaderInData1a->diveNumber = startCount; | |
1246 ptrHeaderInData1b->diveNumber = startCount; | |
1247 repair = 1; | |
1248 } | |
1249 startCount += 1; | |
1250 | |
1251 startAbsolute -= 1; | |
1252 count -= 1; | |
1253 } | |
1254 } | |
1255 else | |
1256 { | |
1257 // copy first pre-dive | |
1258 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
1259 ext_flash_read_block_start(); | |
1260 for(int i = 0; i < HEADERSIZE; i++) | |
1261 ext_flash_read_block(&data[i], EF_HEADER); | |
1262 ext_flash_read_block_stop(); | |
1263 | |
1264 // copy first post-dive | |
1265 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
1266 ext_flash_read_block_start(); | |
1267 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
1268 ext_flash_read_block(&data[i], EF_HEADER); | |
1269 ext_flash_read_block_stop(); | |
1270 | |
1271 if(counterStorage[count] != startCount) | |
1272 { | |
1273 ptrHeaderInData1a->diveNumber = startCount; | |
1274 ptrHeaderInData1b->diveNumber = startCount; | |
1275 repair = 1; | |
1276 } | |
1277 startCount += 1; | |
1278 | |
1279 startAbsolute -= 1; | |
1280 count -= 1; | |
1281 } | |
1282 | |
1283 // write | |
1284 if(repair) | |
1285 { | |
1286 actualPointerHeader = HEADERSTART + (0x1000 * startBackup%2); | |
1287 ef_write_block(data,0x1000,EF_HEADER, 0); | |
1288 } | |
1289 } | |
1290 releaseFrame(97,logCopyDataPtr); | |
1291 settingsGetPointer()->totalDiveCounter = startCount; | |
1292 } | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1293 */ |
38 | 1294 |
1295 // =============================================================================== | |
1296 // ext_flash_repair_dive_log | |
1297 /// @brief This function | |
1298 /// does set | |
1299 /// logFlashNextSampleStartAddress | |
1300 /// and | |
1301 /// lastDiveLogId | |
1302 /// | |
1303 void ext_flash_repair_dive_log(void) | |
1304 { | |
1305 uint8_t header1, header2; | |
1306 convert_Type dataStart; | |
1307 | |
1308 for(int id = 0; id < 255;id++) | |
1309 { | |
1310 actualAddress = HEADERSTART + (0x800 * id); | |
1311 ext_flash_read_block_start(); | |
1312 ext_flash_read_block(&header1, EF_HEADER); | |
1313 ext_flash_read_block(&header2, EF_HEADER); | |
1314 dataStart.u8bit.byteHigh = 0; | |
1315 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
1316 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
1317 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
1318 ext_flash_read_block_stop(); | |
1319 if((header1 == 0xFA) && (header2 == 0xFA)) | |
1320 { | |
1321 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
1322 ext_flash_read_block_start(); | |
1323 ext_flash_read_block(&header1, EF_HEADER); | |
1324 ext_flash_read_block(&header2, EF_HEADER); | |
1325 ext_flash_read_block_stop(); | |
1326 if((header1 != 0xFA) || (header2 != 0xFA)) | |
1327 { | |
1328 actualPointerSample = dataStart.u32bit; | |
1329 actualAddress = actualPointerSample; | |
1330 logbook_recover_brokenlog(id); | |
1331 SSettings *settings = settingsGetPointer(); | |
1332 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
1333 } | |
1334 } | |
1335 } | |
1336 ext_flash_find_start(); | |
1337 } | |
1338 | |
1339 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1340 static void ext_flash_find_start(void) |
38 | 1341 { |
1342 uint8_t id; | |
1343 uint8_t header1, header2; | |
1344 convert_Type dataStart, dataEnd; | |
1345 | |
1346 for(id = 0; id < 255;id++) | |
1347 { | |
1348 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
1349 ext_flash_read_block_start(); | |
1350 ext_flash_read_block(&header1, EF_HEADER); | |
1351 ext_flash_read_block(&header2, EF_HEADER); | |
1352 dataStart.u8bit.byteHigh = 0; | |
1353 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
1354 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
1355 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
1356 ext_flash_read_block_stop(); | |
1357 if((header1 == 0xFF) && (header2 == 0xFF)) | |
1358 { | |
1359 break; | |
1360 } | |
1361 } | |
1362 id--; | |
1363 SSettings *settings = settingsGetPointer(); | |
1364 settings->lastDiveLogId = id; | |
1365 | |
1366 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
1367 actualPointerHeader = actualAddress; | |
1368 | |
1369 ext_flash_read_block_start(); | |
1370 | |
1371 ext_flash_read_block(&header1, EF_HEADER); | |
1372 ext_flash_read_block(&header2, EF_HEADER); | |
1373 dataStart.u8bit.byteHigh = 0; | |
1374 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
1375 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
1376 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
1377 dataEnd.u8bit.byteHigh = 0; | |
1378 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
1379 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
1380 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
1381 ext_flash_read_block_stop(); | |
1382 | |
1383 //Find free space | |
1384 if((header1 == 0xFA) && (header2 == 0xFA)) | |
1385 { | |
1386 uint8_t uiRead = 0; | |
1387 int countFF = 0; | |
1388 //End of last complete dive | |
1389 actualPointerSample = dataEnd.u32bit ; | |
1390 actualAddress = actualPointerSample; | |
1391 //Check if there are samples of dives with less than half a minute | |
1392 while(true) | |
1393 { | |
1394 ext_flash_read_block_start(); | |
1395 ext_flash_read_block(&uiRead, EF_SAMPLE); | |
1396 if(uiRead == 0xFF) | |
1397 countFF++; | |
1398 else | |
1399 countFF = 0; | |
1400 | |
1401 | |
1402 | |
1403 if(countFF == 10) | |
1404 { | |
1405 actualAddress -= 10; | |
1406 break; | |
1407 } | |
1408 | |
1409 //New page: clear | |
1410 if(ext_flash_erase_if_on_page_start()) | |
1411 break; | |
1412 } | |
1413 // Set new start address | |
1414 actualPointerSample = actualAddress; | |
1415 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
1416 } | |
1417 else | |
1418 { | |
1419 settings->logFlashNextSampleStartAddress = SAMPLESTART; | |
1420 } | |
1421 } | |
1422 | |
1423 | |
1424 #endif | |
1425 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1426 static void ext_flash_disable_protection(void) |
38 | 1427 { |
1428 /* | |
1429 extFlashStatusBit8_Type status; | |
1430 | |
1431 status.uw = 0; | |
1432 | |
1433 wait_chip_not_busy(); | |
1434 write_spi(0x50,RELEASE); // EWSR | |
1435 write_spi(0x01,HOLDCS); // WRSR | |
1436 write_spi(status.uw,RELEASE); // new status | |
1437 */ | |
1438 } | |
1439 | |
1440 | |
1441 void ext_flash_disable_protection_for_logbook(void) | |
1442 { | |
1443 /* | |
1444 extFlashStatusBit8_Type status; | |
1445 | |
1446 status.uw = 0; | |
1447 status.ub.BlockProtect0 = 1; | |
1448 status.ub.BlockProtect1 = 0; | |
1449 status.ub.BlockProtect2 = 1; | |
1450 status.ub.BlockProtect3 = 0; // not set in OSTC3. Why? | |
1451 | |
1452 wait_chip_not_busy(); | |
1453 write_spi(0x50,RELEASE); // EWSR | |
1454 write_spi(0x01,HOLDCS); // WRSR | |
1455 write_spi(status.uw,RELEASE); // new status | |
1456 */ | |
1457 } | |
1458 | |
1459 | |
1460 void ext_flash_enable_protection(void) | |
1461 { | |
1462 /* | |
1463 extFlashStatusBit8_Type status; | |
1464 | |
1465 status.uw = 0; | |
1466 status.ub.BlockProtect0 = 1; | |
1467 status.ub.BlockProtect1 = 1; | |
1468 status.ub.BlockProtect2 = 1; | |
1469 status.ub.BlockProtect3 = 1; // not set in OSTC3. Why? | |
1470 | |
1471 wait_chip_not_busy(); | |
1472 write_spi(0x50,RELEASE); // EWSR | |
1473 write_spi(0x01,HOLDCS); // WRSR | |
1474 write_spi(status.uw,RELEASE); // new status | |
1475 */ | |
1476 } | |
1477 | |
1478 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1479 /*void ext_flash_erase_chip(void) |
38 | 1480 { |
1481 wait_chip_not_busy(); | |
1482 write_spi(0x06,RELEASE); | |
1483 write_spi(0x60,RELEASE); | |
1484 wait_chip_not_busy(); | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1485 }*/ |
38 | 1486 |
1487 void ext_flash_erase_firmware(void) | |
1488 { | |
1489 uint32_t size, blocks_64k; | |
1490 | |
1491 actualAddress = FWSTART; | |
1492 size = 1 + FWSTOP - FWSTART; | |
1493 blocks_64k = size / 0x10000; | |
1494 ef_erase_64K(blocks_64k); | |
1495 } | |
1496 | |
1497 void ext_flash_erase_firmware2(void) | |
1498 { | |
1499 uint32_t size, blocks_64k; | |
1500 | |
1501 actualAddress = FWSTART2; | |
1502 size = 1 + FWSTOP2 - FWSTART2; | |
1503 blocks_64k = size / 0x10000; | |
1504 ef_erase_64K(blocks_64k); | |
1505 } | |
1506 | |
1507 | |
1508 | |
1509 void ext_flash_erase_logbook(void) | |
1510 { | |
1511 uint32_t size, blocks_64k; | |
1512 | |
1513 ext_flash_disable_protection_for_logbook(); | |
1514 | |
1515 actualAddress = SAMPLESTART; | |
1516 size = 1 + SAMPLESTOP - SAMPLESTART; | |
1517 blocks_64k = size / 0x10000; | |
1518 ef_erase_64K(blocks_64k); | |
1519 | |
1520 actualAddress = HEADERSTART; | |
1521 size = 1 + HEADERSTOP - HEADERSTART; | |
1522 blocks_64k = size / 0x10000; | |
1523 ef_erase_64K(blocks_64k); | |
1524 | |
1525 ext_flash_enable_protection(); | |
1526 } | |
1527 | |
1528 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1529 static void ext_flash_erase4kB(void) |
38 | 1530 { |
1531 wait_chip_not_busy(); | |
1532 write_spi(0x06,RELEASE);/* WREN */ | |
1533 write_spi(0x20,HOLDCS);/* sector erase cmd */ | |
1534 write_address(RELEASE); | |
1535 } | |
1536 | |
282 | 1537 /* be careful - might not work with entire family and other products |
38 | 1538 * see page 14 of LOGBOOK_V3_S25FS-S_00-271247.pdf |
1539 */ | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1540 static void ext_flash_erase32kB(void) |
38 | 1541 { |
1542 uint32_t actualAddress_backup; | |
1543 | |
1544 actualAddress_backup = actualAddress; | |
1545 actualAddress = 0; | |
1546 wait_chip_not_busy(); | |
1547 write_spi(0x06,RELEASE);/* WREN */ | |
1548 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
1549 write_address(RELEASE); | |
1550 actualAddress = actualAddress_backup; | |
1551 } | |
1552 | |
1553 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1554 static void ext_flash_erase64kB(void) |
38 | 1555 { |
1556 wait_chip_not_busy(); | |
1557 write_spi(0x06,RELEASE);/* WREN */ | |
1558 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
1559 write_address(RELEASE); | |
1560 } | |
1561 | |
1562 | |
1563 void ext_flash_read_block_start(void) | |
1564 { | |
1565 wait_chip_not_busy(); | |
1566 write_spi(0x03,HOLDCS); /* WREN */ | |
1567 write_address(HOLDCS); | |
1568 } | |
1569 | |
1570 /* 4KB, 32KB, 64 KB, not the upper 16 MB with 4 Byte address at the moment */ | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1571 static uint8_t ext_flash_erase_if_on_page_start(void) |
38 | 1572 { |
1573 if(actualAddress < 0x00008000) | |
1574 { | |
1575 /* 4K Byte is 0x1000 */ | |
1576 if((actualAddress & 0xFFF) == 0) | |
1577 { | |
1578 ext_flash_erase4kB(); | |
1579 return 1; | |
1580 } | |
1581 } | |
1582 else | |
1583 if(actualAddress < 0x00010000) | |
1584 { | |
1585 /* 32K Byte is only one page */ | |
1586 if(actualAddress == 0x00010000) | |
1587 { | |
1588 ext_flash_erase32kB(); | |
1589 return 1; | |
1590 } | |
1591 } | |
1592 else | |
1593 { | |
1594 /* 64K Byte is 0x10000 */ | |
1595 if((actualAddress & 0xFFFF) == 0) | |
1596 { | |
1597 ext_flash_erase64kB(); | |
1598 return 1; | |
1599 } | |
1600 } | |
1601 return 0; | |
1602 } | |
1603 | |
1604 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1605 static void ext_flash_read_block(uint8_t *getByte, uint8_t type) |
38 | 1606 { |
1607 *getByte = read_spi(HOLDCS);/* read data */ | |
1608 ext_flash_incf_address(type); | |
1609 } | |
1610 | |
1611 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1612 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type) |
38 | 1613 { |
1614 uint8_t *data; | |
1615 data = getByte; | |
1616 | |
1617 for(uint32_t i=0;i<size;i++) | |
1618 { | |
1619 data[i] = read_spi(HOLDCS);/* read data */ | |
1620 ext_flash_incf_address(type); | |
1621 } | |
1622 } | |
1623 | |
1624 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1625 static void ext_flash_read_block_stop(void) |
38 | 1626 { |
1627 chip_unselect(); | |
1628 } | |
1629 | |
1630 | |
1631 /* Private functions ---------------------------------------------------------*/ | |
1632 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1633 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase) |
38 | 1634 { |
1635 uint32_t remaining_page_size, remaining_length, remaining_space_to_ring_end; | |
1636 | |
1637 if(!length) | |
1638 return; | |
1639 | |
1640 uint32_t ringStart, ringStop; | |
1641 | |
1642 switch(type) | |
1643 { | |
1644 case EF_HEADER: | |
1645 actualAddress = actualPointerHeader; | |
1646 ringStart = HEADERSTART; | |
1647 ringStop = HEADERSTOP; | |
1648 break; | |
1649 case EF_SAMPLE: | |
1650 actualAddress = actualPointerSample; | |
1651 ringStart = SAMPLESTART; | |
1652 ringStop = SAMPLESTOP; | |
1653 break; | |
1654 case EF_DEVICEDATA: | |
1655 actualAddress = actualPointerDevicedata; | |
1656 ringStart = DDSTART; | |
1657 ringStop = DDSTOP; | |
1658 break; | |
1659 case EF_VPMDATA: | |
1660 actualAddress = actualPointerVPM; | |
1661 ringStart = VPMSTART; | |
1662 ringStop = VPMSTOP; | |
1663 break; | |
1664 case EF_SETTINGS: | |
1665 actualAddress = actualPointerSettings; | |
1666 ringStart = SETTINGSSTART; | |
1667 ringStop = SETTINGSSTOP; | |
1668 break; | |
1669 case EF_FIRMWARE: | |
1670 actualAddress = actualPointerFirmware; | |
1671 ringStart = FWSTART; | |
1672 ringStop = FWSTOP; | |
1673 break; | |
1674 case EF_FIRMWARE2: | |
1675 actualAddress = actualPointerFirmware2; | |
1676 ringStart = FWSTART2; | |
1677 ringStop = FWSTOP2; | |
1678 break; | |
1679 default: | |
1680 ringStart = FLASHSTART; | |
1681 ringStop = FLASHSTOP; | |
1682 break; | |
1683 } | |
1684 /* safety */ | |
1685 if(actualAddress < ringStart) | |
1686 actualAddress = ringStart; | |
1687 | |
1688 if(do_not_erase == 0) | |
1689 ext_flash_erase_if_on_page_start(); | |
1690 | |
1691 for(uint32_t i=0;i<length;i++) | |
1692 { | |
1693 ef_hw_rough_delay_us(5); | |
1694 wait_chip_not_busy(); | |
1695 write_spi(0x06,RELEASE); /* WREN */ | |
1696 write_spi(0x02,HOLDCS); /* write cmd */ | |
1697 write_address(HOLDCS); | |
1698 | |
1699 remaining_length = length - i; | |
1700 remaining_page_size = actualAddress & 0xFF; | |
1701 remaining_space_to_ring_end = ringStop - actualAddress; | |
1702 | |
1703 if((remaining_page_size == 0) && (remaining_length >= 256) && (remaining_space_to_ring_end >= 256)) | |
1704 { | |
1705 for(int j=0; j<255; j++) | |
1706 { | |
1707 write_spi(sendByte[i],HOLDCS);/* write data */ | |
1708 actualAddress++; | |
1709 i++; | |
1710 } | |
1711 } | |
1712 /* byte with RELEASE */ | |
1713 write_spi(sendByte[i],RELEASE);/* write data */ | |
1714 actualAddress++; | |
1715 if(actualAddress > ringStop) | |
1716 actualAddress = ringStart; | |
1717 if(do_not_erase == 0) | |
1718 ext_flash_erase_if_on_page_start(); | |
1719 } | |
1720 switch(type) | |
1721 { | |
1722 case EF_HEADER: | |
1723 actualPointerHeader = actualAddress; | |
1724 break; | |
1725 case EF_SAMPLE: | |
1726 actualPointerSample = actualAddress; | |
1727 break; | |
1728 case EF_DEVICEDATA: | |
1729 actualPointerDevicedata = actualAddress; | |
1730 break; | |
1731 case EF_VPMDATA: | |
1732 actualPointerVPM = actualAddress; | |
1733 break; | |
1734 case EF_SETTINGS: | |
1735 actualPointerSettings = actualAddress; | |
1736 break; | |
1737 case EF_FIRMWARE: | |
1738 actualPointerFirmware = actualAddress; | |
1739 break; | |
1740 case EF_FIRMWARE2: | |
1741 actualPointerFirmware2 = actualAddress; | |
1742 break; | |
1743 default: | |
1744 break; | |
1745 } | |
1746 } | |
1747 | |
1748 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1749 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length) |
38 | 1750 { |
1751 if((pointer & 0xFFF) == 0) | |
1752 return 1; | |
1753 | |
1754 uint32_t backup = actualAddress; | |
1755 uint8_t data; | |
1756 uint32_t size_to_page_end; | |
1757 | |
1758 size_to_page_end = 0x1000 - (pointer & 0xFFF); | |
1759 if(length > size_to_page_end) | |
1760 length = size_to_page_end; | |
1761 | |
1762 actualAddress = pointer; | |
1763 ext_flash_read_block_start(); | |
1764 | |
1765 for(uint16_t i = 0; i<length; i++) | |
1766 { | |
1767 ext_flash_read_block(&data, 255); // 255 = ENTIRE FLASH | |
1768 if(data != 0xFF) | |
1769 { | |
1770 ext_flash_read_block_stop(); | |
1771 actualAddress = backup; | |
1772 return 0; | |
1773 } | |
1774 } | |
1775 ext_flash_read_block_stop(); | |
1776 actualAddress = backup; | |
1777 return 1; | |
1778 } | |
1779 | |
1780 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1781 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type) |
38 | 1782 { |
1783 uint32_t ringStart, ringStop; | |
1784 | |
1785 switch(type) | |
1786 { | |
1787 case EF_HEADER: | |
1788 ringStart = HEADERSTART; | |
1789 ringStop = HEADERSTOP; | |
1790 break; | |
1791 case EF_SAMPLE: | |
1792 ringStart = SAMPLESTART; | |
1793 ringStop = SAMPLESTOP; | |
1794 break; | |
1795 case EF_DEVICEDATA: | |
1796 ringStart = DDSTART; | |
1797 ringStop = DDSTOP; | |
1798 break; | |
1799 case EF_VPMDATA: | |
1800 ringStart = VPMSTART; | |
1801 ringStop = VPMSTOP; | |
1802 break; | |
1803 case EF_SETTINGS: | |
1804 ringStart = SETTINGSSTART; | |
1805 ringStop = SETTINGSSTOP; | |
1806 break; | |
1807 default: | |
1808 ringStart = FLASHSTART; | |
1809 ringStop = FLASHSTOP; | |
1810 break; | |
1811 } | |
1812 | |
1813 *pointer = (*pointer & 0xFFF) + 0x1000; | |
1814 | |
1815 if((*pointer < ringStart) || (*pointer >= ringStop)) | |
1816 *pointer = ringStart; | |
1817 } | |
1818 | |
1819 | |
1820 static void ef_erase_64K(uint32_t blocks) | |
1821 { | |
1822 for(uint32_t i = 0; i < blocks; i++) | |
1823 { | |
1824 wait_chip_not_busy(); | |
1825 write_spi(0x06,RELEASE);/* WREN */ | |
1826 write_spi(0xD8,HOLDCS);/* 64k erase cmd */ | |
1827 write_address(RELEASE); | |
1828 actualAddress += 0x10000; | |
1829 HAL_Delay(25); | |
1830 } | |
1831 } | |
1832 | |
1833 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1834 static void chip_unselect(void) |
38 | 1835 { |
1836 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_SET); // chip select | |
1837 } | |
1838 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1839 static void chip_select(void) |
38 | 1840 { |
1841 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_RESET); // chip select | |
1842 } | |
1843 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1844 static void error_led_on(void) |
38 | 1845 { |
1846 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_SET); | |
1847 } | |
1848 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1849 static void error_led_off(void) |
38 | 1850 { |
1851 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_RESET); | |
1852 } | |
1853 | |
1854 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1855 static uint8_t read_spi(uint8_t unselect_CS_afterwards) |
38 | 1856 { |
1857 uint8_t byte; | |
1858 | |
1859 chip_select(); | |
1860 | |
1861 if(HAL_SPI_Receive(&hspiDisplay, &byte, 1, 10000) != HAL_OK) | |
1862 Error_Handler_extflash(); | |
1863 | |
1864 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
1865 { | |
1866 } | |
1867 if(unselect_CS_afterwards) | |
1868 chip_unselect(); | |
1869 | |
1870 return byte; | |
1871 } | |
1872 | |
1873 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1874 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards) |
38 | 1875 { |
1876 chip_select(); | |
1877 | |
1878 if(HAL_SPI_Transmit(&hspiDisplay, &data, 1, 10000) != HAL_OK) | |
1879 Error_Handler_extflash(); | |
1880 | |
1881 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
1882 { | |
1883 } | |
1884 if(unselect_CS_afterwards) | |
1885 chip_unselect(); | |
1886 } | |
1887 | |
1888 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1889 static void write_address(uint8_t unselect_CS_afterwards) |
38 | 1890 { |
1891 uint8_t hi, med ,lo; | |
1892 | |
1893 hi = (actualAddress >> 16) & 0xFF; | |
1894 med = (actualAddress >> 8) & 0xFF; | |
1895 lo = actualAddress & 0xFF; | |
1896 | |
1897 write_spi(hi, HOLDCS); | |
1898 write_spi(med, HOLDCS); | |
1899 write_spi(lo, unselect_CS_afterwards); | |
1900 } | |
1901 | |
1902 | |
1903 static void wait_chip_not_busy(void) | |
1904 { | |
1905 uint8_t status; | |
1906 | |
1907 chip_unselect(); | |
1908 | |
1909 write_spi(0x05,HOLDCS); /* RDSR */ | |
1910 status = read_spi(HOLDCS);/* read status */ | |
1911 while(status & 0x01) | |
1912 { | |
1913 HAL_Delay(1); | |
1914 status = read_spi(HOLDCS);/* read status */ | |
1915 } | |
1916 chip_unselect(); | |
1917 } | |
1918 | |
1919 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1920 static void ext_flash_incf_address(uint8_t type) |
38 | 1921 { |
1922 uint32_t ringStart, ringStop; | |
1923 | |
1924 actualAddress += 1; | |
1925 | |
1926 switch(type) | |
1927 { | |
1928 case EF_HEADER: | |
1929 ringStart = HEADERSTART; | |
1930 ringStop = HEADERSTOP; | |
1931 break; | |
1932 case EF_SAMPLE: | |
1933 ringStart = SAMPLESTART; | |
1934 ringStop = SAMPLESTOP; | |
1935 break; | |
1936 case EF_DEVICEDATA: | |
1937 ringStart = DDSTART; | |
1938 ringStop = DDSTOP; | |
1939 break; | |
1940 case EF_VPMDATA: | |
1941 ringStart = VPMSTART; | |
1942 ringStop = VPMSTOP; | |
1943 break; | |
1944 case EF_SETTINGS: | |
1945 ringStart = SETTINGSSTART; | |
1946 ringStop = SETTINGSSTOP; | |
1947 break; | |
1948 case EF_FIRMWARE: | |
1949 ringStart = FWSTART; | |
1950 ringStop = FWSTOP; | |
1951 break; | |
1952 case EF_FIRMWARE2: | |
1953 ringStart = FWSTART2; | |
1954 ringStop = FWSTOP2; | |
1955 break; | |
1956 default: | |
1957 ringStart = FLASHSTART; | |
1958 ringStop = FLASHSTOP; | |
1959 break; | |
1960 } | |
1961 | |
1962 if((actualAddress < ringStart) || (actualAddress > ringStop)) | |
1963 actualAddress = ringStart; | |
1964 } | |
1965 | |
1966 | |
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1967 static void ext_flash_decf_address_ring(uint8_t type) |
38 | 1968 { |
1969 uint32_t ringStart, ringStop; | |
1970 | |
1971 switch(type) | |
1972 { | |
1973 case EF_HEADER: | |
1974 ringStart = HEADERSTART; | |
1975 ringStop = HEADERSTOP; | |
1976 break; | |
1977 case EF_SAMPLE: | |
1978 ringStart = SAMPLESTART; | |
1979 ringStop = SAMPLESTOP; | |
1980 break; | |
1981 case EF_DEVICEDATA: | |
1982 ringStart = DDSTART; | |
1983 ringStop = DDSTOP; | |
1984 break; | |
1985 case EF_VPMDATA: | |
1986 ringStart = VPMSTART; | |
1987 ringStop = VPMSTOP; | |
1988 break; | |
1989 case EF_SETTINGS: | |
1990 ringStart = SETTINGSSTART; | |
1991 ringStop = SETTINGSSTOP; | |
1992 break; | |
1993 case EF_FIRMWARE: | |
1994 ringStart = FWSTART; | |
1995 ringStop = FWSTOP; | |
1996 break; | |
1997 case EF_FIRMWARE2: | |
1998 ringStart = FWSTART2; | |
1999 ringStop = FWSTOP2; | |
2000 break; | |
2001 default: | |
2002 ringStart = FLASHSTART; | |
2003 ringStop = FLASHSTOP; | |
2004 break; | |
2005 } | |
2006 | |
2007 if((actualAddress <= ringStart) || (actualAddress > ringStop)) | |
2008 actualAddress = ringStop; | |
2009 else | |
2010 actualAddress -= 1; | |
2011 } | |
2012 | |
2013 | |
2014 static void ef_hw_rough_delay_us(uint32_t delayUs) | |
2015 { | |
2016 if(!delayUs) | |
2017 return; | |
2018 delayUs*= 12; | |
2019 while(delayUs--); | |
2020 return; | |
2021 } | |
2022 | |
2023 static void Error_Handler_extflash(void) | |
2024 { | |
2025 while(1) | |
2026 { | |
2027 } | |
2028 } | |
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2029 /* |
38 | 2030 uint8_t ext_flash_erase_firmware_if_not_empty(void) |
2031 { | |
2032 const uint8_t TESTSIZE_FW = 4; | |
2033 | |
2034 uint8_t data[TESTSIZE_FW]; | |
2035 uint8_t notEmpty = 0; | |
2036 | |
2037 actualAddress = FWSTART; | |
2038 ext_flash_read_block_start(); | |
2039 for(int i = 0; i < TESTSIZE_FW; i++) | |
2040 { | |
2041 ext_flash_read_block(&data[i], EF_FIRMWARE); | |
2042 if(data[i] != 0xFF) | |
2043 notEmpty = 1; | |
2044 } | |
2045 ext_flash_read_block_stop(); | |
2046 | |
2047 if(notEmpty) | |
2048 { | |
2049 ext_flash_erase_firmware(); | |
2050 return 1; | |
2051 } | |
2052 else | |
2053 return 0; | |
2054 } | |
2055 | |
2056 uint8_t ext_flash_erase_firmware2_if_not_empty(void) | |
2057 { | |
2058 const uint8_t TESTSIZE_FW = 4; | |
2059 | |
2060 uint8_t data[TESTSIZE_FW]; | |
2061 uint8_t notEmpty = 0; | |
2062 | |
2063 actualAddress = FWSTART2; | |
2064 ext_flash_read_block_start(); | |
2065 for(int i = 0; i < TESTSIZE_FW; i++) | |
2066 { | |
2067 ext_flash_read_block(&data[i], EF_FIRMWARE2); | |
2068 if(data[i] != 0xFF) | |
2069 notEmpty = 1; | |
2070 } | |
2071 ext_flash_read_block_stop(); | |
2072 | |
2073 if(notEmpty) | |
2074 { | |
2075 ext_flash_erase_firmware2(); | |
2076 return 1; | |
2077 } | |
2078 else | |
2079 return 0; | |
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2080 }*/ |