|
38
|
1 /**
|
|
|
2 ******************************************************************************
|
|
|
3 * @file UART/UART_Printf/Src/stm32f4xx_hal_msp.c
|
|
|
4 * @author MCD Application Team
|
|
|
5 * @version V1.1.0
|
|
|
6 * @date 26-June-2014
|
|
|
7 * @brief HAL MSP module.
|
|
|
8 ******************************************************************************
|
|
|
9 * @attention
|
|
|
10 *
|
|
|
11 * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
|
12 *
|
|
|
13 * Redistribution and use in source and binary forms, with or without modification,
|
|
|
14 * are permitted provided that the following conditions are met:
|
|
|
15 * 1. Redistributions of source code must retain the above copyright notice,
|
|
|
16 * this list of conditions and the following disclaimer.
|
|
|
17 * 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
|
18 * this list of conditions and the following disclaimer in the documentation
|
|
|
19 * and/or other materials provided with the distribution.
|
|
|
20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
|
21 * may be used to endorse or promote products derived from this software
|
|
|
22 * without specific prior written permission.
|
|
|
23 *
|
|
|
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
|
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
|
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
|
30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
|
31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
|
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
34 *
|
|
|
35 ******************************************************************************
|
|
|
36 */
|
|
|
37
|
|
|
38 /* Includes ------------------------------------------------------------------*/
|
|
|
39 #include "baseCPU2.h"
|
|
|
40
|
|
|
41 #include "stm32f4xx_hal.h"
|
|
|
42
|
|
|
43 /** @addtogroup STM32F4xx_HAL_Examples
|
|
|
44 * @{
|
|
|
45 */
|
|
|
46
|
|
|
47 /** @defgroup HAL_MSP
|
|
|
48 * @brief HAL MSP module.
|
|
|
49 * @{
|
|
|
50 */
|
|
|
51
|
|
|
52 /* Private typedef -----------------------------------------------------------*/
|
|
|
53 /* Private define ------------------------------------------------------------*/
|
|
|
54 /* Private macro -------------------------------------------------------------*/
|
|
|
55 /* Private variables ---------------------------------------------------------*/
|
|
|
56 /* Private function prototypes -----------------------------------------------*/
|
|
|
57 /* Private functions ---------------------------------------------------------*/
|
|
|
58
|
|
|
59 /** @defgroup HAL_MSP_Private_Functions
|
|
|
60 * @{
|
|
|
61 */
|
|
|
62
|
|
|
63 void HAL_I2C_ManualControl_MspInit(void)
|
|
|
64 {
|
|
|
65 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
66
|
|
|
67 /*##-1- Enable peripherals and GPIO Clocks #################################*/
|
|
|
68 /* Enable GPIO TX/RX clock */
|
|
|
69 I2Cx_SCL_GPIO_CLK_ENABLE();
|
|
|
70 I2Cx_SDA_GPIO_CLK_ENABLE();
|
|
|
71
|
|
|
72 /*##-2- Configure peripheral GPIO ##########################################*/
|
|
|
73 /* I2C CLOCK GPIO pin configuration */
|
|
|
74 GPIO_InitStruct.Pin = I2Cx_SCL_PIN;
|
|
|
75 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
|
|
|
76 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
|
77 GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
|
78
|
|
|
79 HAL_GPIO_Init(I2Cx_SCL_GPIO_PORT, &GPIO_InitStruct);
|
|
|
80
|
|
|
81 /* I2C DATA GPIO pin configuration */
|
|
|
82 GPIO_InitStruct.Pin = I2Cx_SDA_PIN;
|
|
|
83 GPIO_InitStruct.Alternate = GPIO_MODE_INPUT;
|
|
|
84
|
|
|
85 HAL_GPIO_Init(I2Cx_SDA_GPIO_PORT, &GPIO_InitStruct);
|
|
|
86 }
|
|
|
87
|
|
|
88 /**
|
|
|
89 * @brief I2C MSP Initialization
|
|
|
90 * This function configures the hardware resources used in this example:
|
|
|
91 * - Peripheral's clock enable
|
|
|
92 * - Peripheral's GPIO Configuration
|
|
|
93 * - DMA configuration for transmission request by peripheral
|
|
|
94 * - NVIC configuration for DMA interrupt request enable
|
|
|
95 * @param hi2c: I2C handle pointer
|
|
|
96 * @retval None
|
|
|
97 */
|
|
|
98 void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
|
|
|
99 {
|
|
|
100 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
101
|
|
|
102 /*##-1- Enable peripherals and GPIO Clocks #################################*/
|
|
|
103 /* Enable GPIO TX/RX clock */
|
|
|
104 I2Cx_SCL_GPIO_CLK_ENABLE();
|
|
|
105 I2Cx_SDA_GPIO_CLK_ENABLE();
|
|
|
106 /* Enable I2C1 clock */
|
|
|
107 I2Cx_CLK_ENABLE();
|
|
|
108
|
|
|
109 /*##-2- Configure peripheral GPIO ##########################################*/
|
|
|
110 /* I2C TX GPIO pin configuration */
|
|
|
111 GPIO_InitStruct.Pin = I2Cx_SCL_PIN;
|
|
|
112 GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
327
|
113 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
38
|
114 GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
|
115 GPIO_InitStruct.Alternate = I2Cx_SCL_AF;
|
|
|
116
|
|
|
117 HAL_GPIO_Init(I2Cx_SCL_GPIO_PORT, &GPIO_InitStruct);
|
|
|
118
|
|
|
119 /* I2C RX GPIO pin configuration */
|
|
|
120 GPIO_InitStruct.Pin = I2Cx_SDA_PIN;
|
|
|
121 GPIO_InitStruct.Alternate = I2Cx_SDA_AF;
|
|
|
122
|
|
|
123 HAL_GPIO_Init(I2Cx_SDA_GPIO_PORT, &GPIO_InitStruct);
|
|
|
124
|
|
|
125 /*##-3- Configure the NVIC for I2C #########################################*/
|
|
|
126 /* NVIC for I2C1 */
|
|
327
|
127
|
|
|
128 /* The callbacks are not used => no need to activate the interrupts */
|
|
|
129 /*
|
|
38
|
130 HAL_NVIC_SetPriority(I2Cx_ER_IRQn, 1, 2);
|
|
|
131 HAL_NVIC_EnableIRQ(I2Cx_ER_IRQn);
|
|
|
132 HAL_NVIC_SetPriority(I2Cx_EV_IRQn, 1, 3);
|
|
|
133 HAL_NVIC_EnableIRQ(I2Cx_EV_IRQn);
|
|
327
|
134 */
|
|
38
|
135 }
|
|
|
136
|
|
|
137 /**
|
|
|
138 * @brief I2C MSP De-Initialization
|
|
|
139 * This function frees the hardware resources used in this example:
|
|
|
140 * - Disable the Peripheral's clock
|
|
|
141 * - Revert GPIO, DMA and NVIC configuration to their default state
|
|
|
142 * @param hi2c: I2C handle pointer
|
|
|
143 * @retval None
|
|
|
144 */
|
|
|
145 void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
|
|
|
146 {
|
|
|
147 /*##-1- Reset peripherals ##################################################*/
|
|
|
148 I2Cx_FORCE_RESET();
|
|
|
149 I2Cx_RELEASE_RESET();
|
|
|
150
|
|
|
151 /*##-2- Disable peripherals and GPIO Clocks ################################*/
|
|
|
152 /* Configure I2C Tx as alternate function */
|
|
|
153 HAL_GPIO_DeInit(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN);
|
|
|
154 /* Configure I2C Rx as alternate function */
|
|
|
155 HAL_GPIO_DeInit(I2Cx_SDA_GPIO_PORT, I2Cx_SDA_PIN);
|
|
|
156
|
|
|
157 /*##-3- Disable the NVIC for I2C ###########################################*/
|
|
|
158 HAL_NVIC_DisableIRQ(I2Cx_ER_IRQn);
|
|
|
159 HAL_NVIC_DisableIRQ(I2Cx_EV_IRQn);
|
|
|
160 }
|
|
|
161
|
|
|
162
|
|
|
163 /**
|
|
|
164 * @brief RTC MSP Initialization
|
|
|
165 * This function configures the hardware resources used in this example
|
|
|
166 * @param hrtc: RTC handle pointer
|
|
|
167 *
|
|
|
168 * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
|
|
|
169 * the RTC clock source; in this case the Backup domain will be reset in
|
|
|
170 * order to modify the RTC Clock source, as consequence RTC registers (including
|
|
|
171 * the backup registers) and RCC_BDCR register are set to their reset values.
|
|
|
172 *
|
|
|
173 * @retval None
|
|
|
174 */
|
|
|
175 void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
|
|
|
176 {
|
|
|
177
|
|
|
178 if(hrtc->Instance==RTC)
|
|
|
179 {
|
|
|
180 /* USER CODE BEGIN RTC_MspInit 0 */
|
|
|
181 RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
182 RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
|
|
183
|
|
|
184 /*##-1- Configue LSI as RTC clock soucre ###################################*/
|
|
|
185 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
|
|
|
186 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
|
|
187 RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
|
|
188 HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
189
|
|
|
190 PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
|
|
|
191 PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
|
|
192 HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
|
|
|
193
|
|
|
194 /* USER CODE END RTC_MspInit 0 */
|
|
|
195 /* Peripheral clock enable */
|
|
|
196 __HAL_RCC_RTC_ENABLE();
|
|
|
197 /* USER CODE BEGIN RTC_MspInit 1 */
|
|
|
198
|
|
|
199 /*##-3- Configure the NVIC for RTC WakeUp Timer ############################*/
|
|
|
200 HAL_NVIC_SetPriority(RTC_WKUP_IRQn, 0x0F, 0);
|
|
|
201 HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn);
|
|
|
202
|
|
|
203 /* USER CODE END RTC_MspInit 1 */
|
|
|
204 }
|
|
|
205
|
|
|
206 }
|
|
|
207
|
|
|
208
|
|
|
209 void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
|
|
|
210 {
|
|
|
211
|
|
|
212 if(hrtc->Instance==RTC)
|
|
|
213 {
|
|
|
214 /* USER CODE BEGIN RTC_MspDeInit 0 */
|
|
|
215
|
|
|
216 /* USER CODE END RTC_MspDeInit 0 */
|
|
|
217 /* Peripheral clock disable */
|
|
|
218 __HAL_RCC_RTC_DISABLE();
|
|
|
219 /* USER CODE BEGIN RTC_MspDeInit 1 */
|
|
|
220
|
|
|
221 /* USER CODE END RTC_MspDeInit 1 */
|
|
|
222 }
|
|
|
223
|
|
|
224 }
|
|
|
225
|
|
|
226
|
|
|
227
|
|
|
228 void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
|
229 {
|
|
|
230
|
|
|
231 GPIO_InitTypeDef GPIO_InitStruct;
|
|
662
|
232 if(huart->Instance==USART1)
|
|
38
|
233 {
|
|
662
|
234 __GPIOA_CLK_ENABLE();
|
|
|
235 __USART1_CLK_ENABLE();
|
|
|
236 GPIO_InitStruct.Pin = GPIO_PIN_9;
|
|
38
|
237 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
238 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
662
|
239 GPIO_InitStruct.Speed = GPIO_SPEED_FAST; //GPIO_SPEED_LOW;
|
|
|
240 GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
|
241 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
242
|
|
|
243 GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
38
|
244 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
245 }
|
|
|
246 }
|
|
|
247
|
|
|
248
|
|
|
249 void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
|
250 {
|
|
662
|
251 if(huart->Instance==USART1)
|
|
38
|
252 {
|
|
662
|
253 HAL_NVIC_DisableIRQ(USART1_IRQn);
|
|
|
254 __USART1_CLK_DISABLE();
|
|
|
255 HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
38
|
256 }
|
|
|
257 }
|
|
|
258
|
|
|
259
|
|
|
260
|
|
|
261 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
