Mercurial > public > ostc4
annotate Discovery/Src/tComm.c @ 84:e6abbef57475 kittz
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
| author | Dmitry Romanov <kitt@bk.ru> |
|---|---|
| date | Wed, 21 Nov 2018 10:25:15 +0300 |
| parents | 8f8ea3a32e82 |
| children | b7689d9e888a |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tComm.c | |
| 5 /// \brief Main file for communication with PC | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 08-Aug-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /** | |
| 30 ============================================================================== | |
| 31 ##### How to use ##### | |
| 32 ============================================================================== | |
| 33 ============================================================================== | |
| 34 ##### History ##### | |
| 35 ============================================================================== | |
| 36 160211 added 4 bytes Serial in update Files after pruefsumme prior to binary | |
| 37 160211 0x6B changed to version only | |
| 38 160623 fixed 0x72 (in V1.0.9) | |
| 39 160623 fixed rebuild menu (before update) for V1.0.10 | |
| 40 | |
| 41 ============================================================================== | |
| 42 ##### CTS / RTS ##### | |
| 43 ============================================================================== | |
| 44 RTS ist immer Output, CTS is immer Input | |
| 45 | |
| 46 BlueMod Pin D7 UART-RTS# ist Output | |
| 47 geht auf STM32F429 PA11 CTS (Input) | |
| 48 dito STM32 PA12 RTS geht auf BlueMod UART-CTS# F3 | |
| 49 | |
| 50 siehe BlueMod_SR_HWreference_r06.pdf, Seite 156 | |
| 51 und MAIN_CPU STM32F4 Reference manual DM00031020.pdf, Seite 990 | |
| 52 | |
| 53 | |
| 54 ============================================================================== | |
| 55 ##### Codes ##### | |
| 56 ============================================================================== | |
| 57 [0x73] upload CPU2 firmware in SDRAM and update CPU2 | |
| 58 | |
| 59 [0x74] upload MainCPU firmware in EEPROM and start bootloader | |
| 60 | |
| 61 OSTC3 stuff can be found in comm.asm | |
| 62 */ | |
| 63 | |
| 64 /* Includes ------------------------------------------------------------------*/ | |
| 65 | |
| 66 #include "tComm.h" | |
| 67 | |
| 68 #include "externCPU2bootloader.h" | |
| 69 #include "externLogbookFlash.h" | |
| 70 #include "gfx_colors.h" | |
| 71 #include "gfx_engine.h" | |
| 72 #include "gfx_fonts.h" | |
| 73 #include "ostc.h" | |
| 74 | |
| 75 #ifndef BOOTLOADER_STANDALONE | |
| 76 # include "base.h" | |
| 77 # include "tHome.h" | |
| 78 # include "logbook.h" | |
| 79 # include "tMenu.h" | |
| 80 #else | |
| 81 # include "base_bootloader.h" | |
| 82 # include "firmwareEraseProgram.h" | |
| 83 #endif | |
| 84 | |
| 85 #ifdef SPECIALPROGRAMM | |
| 86 # include "firmwareEraseProgram.h" | |
| 87 #endif | |
| 88 | |
| 89 #include <string.h> | |
| 90 | |
| 91 | |
| 92 /* Private variables ---------------------------------------------------------*/ | |
| 93 GFX_DrawCfgScreen tCscreen; | |
| 94 GFX_DrawCfgWindow tCwindow; | |
| 95 | |
| 96 uint8_t receiveStartByteUart = 0; | |
| 97 uint8_t bluetoothActiveLastTime = 0; | |
| 98 | |
| 99 uint8_t StartListeningToUART = 0; | |
| 100 char display_text[256] = { 0 }; | |
| 101 | |
| 102 uint8_t setForcedBluetoothName = 0; | |
| 103 | |
| 104 uint8_t updateSettingsAndMenuOnExit = 0; | |
| 105 | |
| 106 /* Private types -------------------------------------------------------------*/ | |
| 107 #define BYTE_DOWNLOAD_MODE (0xBB) | |
| 108 #define BYTE_SERVICE_MODE (0xAA) | |
| 109 | |
| 110 const uint8_t id_Region1_firmware = 0xFF; | |
| 111 const uint8_t id_RTE = 0xFE; | |
| 112 const uint8_t id_FONT = 0x10; | |
| 113 const uint8_t id_FONT_OLD = 0x00; | |
| 114 | |
| 115 /* Private function prototypes -----------------------------------------------*/ | |
| 116 | |
| 117 static void tComm_Error_Handler(void); | |
| 118 static uint8_t select_mode(uint8_t aRxByte); | |
| 119 uint8_t receive_update_flex(uint8_t isRTEupdateALLOWED); | |
| 120 uint8_t receive_update_data_flex(uint8_t* pBuffer1, uint8_t* pBuffer2, uint8_t RTEupdateALLOWED); | |
| 121 uint8_t receive_update_data_mainCPU_firmware(void); | |
| 122 uint8_t receive_update_data_mainCPU_variable_firmware(void); | |
| 123 uint8_t receive_update_data_mainCPU_firmware_subrotuine(uint8_t region, uint8_t* pBuffer1, uint8_t* pBuffer2); | |
| 124 HAL_StatusTypeDef receive_uart_large_size(UART_HandleTypeDef *huart, uint8_t *pData, uint32_t Size); | |
| 125 static uint8_t openComm(uint8_t aRxByte); | |
| 126 uint8_t tComm_Set_Bluetooth_Name_sub(uint16_t serial); | |
| 127 uint8_t HW_Set_Bluetooth_Name(uint16_t serial, uint8_t withEscapeSequence); | |
| 128 uint8_t prompt4D4C(uint8_t mode); | |
| 129 | |
| 130 #ifdef BOOTLOADER_STANDALONE | |
| 131 static uint8_t receive_update_data_cpu2(void); | |
| 132 uint8_t receive_update_data_cpu2_sub(uint8_t* pBuffer); | |
| 133 #endif | |
| 134 | |
| 135 /* Exported functions --------------------------------------------------------*/ | |
| 136 | |
| 137 void tComm_init(void) | |
| 138 { | |
| 139 tCscreen.FBStartAdress = 0; | |
| 140 tCscreen.ImageHeight = 480; | |
| 141 tCscreen.ImageWidth = 800; | |
| 142 tCscreen.LayerIndex = 1; | |
| 143 | |
| 144 tCwindow.Image = &tCscreen; | |
| 145 tCwindow.WindowNumberOfTextLines = 6; | |
| 146 tCwindow.WindowLineSpacing = 65; | |
| 147 tCwindow.WindowTab = 400; | |
| 148 tCwindow.WindowX0 = 20; | |
| 149 tCwindow.WindowX1 = 779; | |
| 150 tCwindow.WindowY0 = 0; | |
| 151 tCwindow.WindowY1 = 799; | |
| 152 | |
| 153 StartListeningToUART = 1; | |
| 154 | |
| 155 /* WHY? | |
| 156 #ifdef BLE_NENABLE_PIN | |
| 157 HAL_GPIO_WritePin(BLE_NENABLE_GPIO_PORT,BLE_NENABLE_PIN,GPIO_PIN_RESET); | |
| 158 #endif | |
| 159 */ | |
| 160 } | |
| 161 | |
| 162 uint8_t tComm_control(void) | |
| 163 { | |
| 164 uint8_t answer = 0; | |
| 165 #ifndef BOOTLOADER_STANDALONE | |
| 166 | |
| 167 /* should do something like reset UART ... */ | |
| 168 if( settingsGetPointer()->bluetoothActive == 0) | |
| 169 { | |
| 170 if(bluetoothActiveLastTime) | |
| 171 { | |
| 172 HAL_UART_DeInit(&UartHandle); | |
| 173 HAL_Delay(1); | |
| 174 HAL_UART_Init(&UartHandle); | |
| 175 HAL_Delay(1); | |
| 176 UartReady = RESET; | |
| 177 StartListeningToUART = 1; | |
| 178 bluetoothActiveLastTime = 0; | |
| 179 receiveStartByteUart = 0; | |
| 180 } | |
| 181 return 0; | |
| 182 } | |
| 183 else | |
| 184 { | |
| 185 bluetoothActiveLastTime = 1; | |
| 186 } | |
| 187 | |
| 188 #endif | |
| 189 | |
| 190 /*##-2- Put UART peripheral in reception process ###########################*/ | |
| 191 | |
| 192 if((UartReady == RESET) && StartListeningToUART) | |
| 193 { | |
| 194 StartListeningToUART = 0; | |
| 195 if(HAL_UART_Receive_IT(&UartHandle, &receiveStartByteUart, 1) != HAL_OK) | |
| 196 tComm_Error_Handler(); | |
| 197 } | |
| 198 /* Reset transmission flag */ | |
| 199 if(UartReady == SET) | |
| 200 { | |
| 201 UartReady = RESET; | |
| 202 if((receiveStartByteUart == BYTE_DOWNLOAD_MODE) || (receiveStartByteUart == BYTE_SERVICE_MODE)) | |
| 203 answer = openComm(receiveStartByteUart); | |
| 204 StartListeningToUART = 1; | |
| 205 return answer; | |
| 206 } | |
| 207 return 0; | |
| 208 } | |
| 209 | |
| 210 | |
| 211 void tComm_refresh(void) | |
| 212 { | |
| 213 if(tCscreen.FBStartAdress == 0) | |
| 214 { | |
| 215 GFX_hwBackgroundOn(); | |
| 216 tCscreen.FBStartAdress = getFrame(18); | |
| 217 write_content_simple(&tCscreen, 0, 800, 480-24, &FontT24,"Exit",CLUT_ButtonSurfaceScreen); | |
| 218 if(receiveStartByteUart == BYTE_SERVICE_MODE) | |
| 219 GFX_write_string(&FontT48, &tCwindow, "Service mode enabled",2); | |
| 220 else | |
| 221 GFX_write_string(&FontT48, &tCwindow, "Download mode enabled",2); | |
| 222 GFX_SetFramesTopBottom(tCscreen.FBStartAdress, NULL,480); | |
| 223 display_text[0] = 0; | |
| 224 display_text[255] = 0; | |
| 225 } | |
| 226 else if(display_text[255]) | |
| 227 { | |
| 228 display_text[display_text[255]] = 0; | |
| 229 releaseFrame(18,tCscreen.FBStartAdress); | |
| 230 tCscreen.FBStartAdress = getFrame(18); | |
| 231 write_content_simple(&tCscreen, 0, 800, 480-24, &FontT24,"Exit",CLUT_ButtonSurfaceScreen); | |
| 232 GFX_write_string(&FontT48, &tCwindow, display_text,2); | |
| 233 GFX_SetFrameTop(tCscreen.FBStartAdress); | |
| 234 display_text[0] = 0; | |
| 235 display_text[255] = 0; | |
| 236 } | |
| 237 } | |
| 238 | |
| 239 | |
| 240 void tComm_verlauf(uint8_t percentage_complete) | |
| 241 { | |
| 242 uint32_t pDestination; | |
| 243 | |
| 244 pDestination = (uint32_t)tCscreen.FBStartAdress; | |
| 245 pDestination += 150 * tCscreen.ImageHeight * 2; | |
| 246 pDestination += 100 * 2; | |
| 247 | |
| 248 if(percentage_complete > 100) | |
| 249 percentage_complete = 100; | |
| 250 | |
| 251 int i = 1; | |
| 252 while(i<=percentage_complete) | |
| 253 { | |
| 254 i += 1; | |
| 255 for(int y=0;y<4;y++) | |
| 256 { | |
| 257 for(int x=0;x<40;x++) | |
| 258 { | |
| 259 *(__IO uint16_t*)pDestination = 0xFF00 + 00; | |
| 260 pDestination += 2; | |
| 261 } | |
| 262 pDestination += (tCscreen.ImageHeight - 40 )* 2; | |
| 263 } | |
| 264 pDestination += tCscreen.ImageHeight * 2; // one spare line | |
| 265 } | |
| 266 } | |
| 267 | |
| 268 | |
| 269 void tComm_exit(void) | |
| 270 { | |
| 271 SStateList status; | |
| 272 get_globalStateList(&status); | |
| 273 | |
| 274 releaseFrame(18,tCscreen.FBStartAdress); | |
| 275 tCscreen.FBStartAdress = 0; | |
| 276 GFX_hwBackgroundOff(); | |
| 277 | |
| 278 if(setForcedBluetoothName) | |
| 279 { | |
| 280 setForcedBluetoothName = 0; | |
| 281 MX_Bluetooth_PowerOff(); | |
| 282 HAL_Delay(1000); | |
| 283 MX_Bluetooth_PowerOn(); | |
| 284 tComm_Set_Bluetooth_Name(1); | |
| 285 } | |
| 286 #ifndef BOOTLOADER_STANDALONE | |
| 287 if(updateSettingsAndMenuOnExit) | |
| 288 { | |
| 289 check_and_correct_settings(); | |
| 290 createDiveSettings(); | |
| 291 tM_rebuild_menu_after_tComm(); | |
| 292 } | |
| 293 #endif | |
| 294 updateSettingsAndMenuOnExit = 0; | |
| 295 | |
| 296 if(status.base == BaseComm) | |
| 297 { | |
| 298 #ifndef BOOTLOADER_STANDALONE | |
| 299 set_globalState_tHome(); | |
| 300 #else | |
| 301 set_globalState_Base(); | |
| 302 #endif | |
| 303 } | |
| 304 } | |
| 305 | |
| 306 | |
| 307 uint8_t tComm_Set_Bluetooth_Name(uint8_t force) | |
| 308 { | |
| 309 uint8_t answer = 0; | |
| 310 | |
| 311 if(hardwareDataGetPointer()->secondarySerial != 0xFFFF) | |
| 312 { | |
| 313 if(force || (hardwareDataGetPointer()->secondary_bluetooth_name_set == 0xFF)) | |
| 314 answer = HW_Set_Bluetooth_Name(hardwareDataGetPointer()->secondarySerial, 0); | |
| 315 #ifdef BOOTLOADER_STANDALONE | |
| 316 if(answer == HAL_OK) | |
| 317 hardware_programmSecondaryBluetoothNameSet(); | |
| 318 #endif | |
| 319 } | |
| 320 else | |
| 321 if(hardwareDataGetPointer()->primarySerial != 0xFFFF) | |
| 322 { | |
| 323 if(force || (hardwareDataGetPointer()->production_bluetooth_name_set == 0xFF)) | |
| 324 answer = HW_Set_Bluetooth_Name(hardwareDataGetPointer()->primarySerial, 0); | |
| 325 #ifdef BOOTLOADER_STANDALONE | |
| 326 if(answer == HAL_OK) | |
| 327 hardware_programmPrimaryBluetoothNameSet(); | |
| 328 #endif | |
| 329 } | |
| 330 return answer; | |
| 331 } | |
| 332 | |
| 333 | |
| 334 uint8_t HW_Set_Bluetooth_Name(uint16_t serial, uint8_t withEscapeSequence) | |
| 335 { | |
| 336 uint8_t answer = HAL_OK; | |
| 337 uint8_t aRxBuffer[50]; | |
| 338 | |
| 339 // char aTxFactoryDefaults[50] = "AT&F1\r"; | |
| 340 | |
| 341 char aTxBufferEscapeSequence[50] = "+++"; | |
| 342 // limit is 19 chars, with 7 chars shown in BLE advertising mode | |
| 343 //char aTxBufferName[50] = "AT+BNAME=BONEX-HW%4a\r"; | |
| 344 //________________________123456789012345678901 | |
| 345 char aTxBufferName[50] = "AT+BNAME=OSTC4-12345\r"; | |
| 346 char answerOkay[6] = "\r\nOKr\n"; | |
| 347 | |
| 348 gfx_number_to_string(5,1,&aTxBufferName[15],serial); | |
| 349 | |
| 350 // store active configuration in non-volatile memory | |
| 351 char aTxBufferWrite[50] = "AT&W\r"; | |
| 352 | |
| 353 // char aTxBufferReset[50] = "AT+RESET\r"; | |
| 354 | |
| 355 | |
| 356 HAL_Delay(1010); | |
| 357 if(withEscapeSequence) | |
| 358 { | |
| 359 aRxBuffer[0] = 0; | |
| 360 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferEscapeSequence, 3, 2000)!= HAL_OK) | |
| 361 answer = HAL_ERROR; | |
| 362 HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 3, 2000); | |
| 363 HAL_Delay(1010); | |
| 364 | |
| 365 for(int i=0;i<3;i++) | |
| 366 if(aRxBuffer[i] != '+') | |
| 367 answer = HAL_ERROR; | |
| 368 } | |
| 369 | |
| 370 aRxBuffer[0] = 0; | |
| 371 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferName, 21, 2000)!= HAL_OK) | |
| 372 answer = HAL_ERROR; | |
| 373 HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 21+6, 2000); | |
| 374 | |
| 375 for(int i=0;i<21;i++) | |
| 376 if(aRxBuffer[i] != aTxBufferName[i]) | |
| 377 answer = HAL_ERROR; | |
| 378 | |
| 379 for(int i=0;i<6;i++) | |
| 380 if(aRxBuffer[21+i] != answerOkay[i]) | |
| 381 answer = HAL_ERROR; | |
| 382 | |
| 383 HAL_Delay(200); | |
| 384 | |
| 385 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferWrite, 5, 2000)!= HAL_OK) | |
| 386 answer = HAL_ERROR; | |
| 387 HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 5+6, 2000); | |
| 388 | |
| 389 for(int i=0;i<5;i++) | |
| 390 if(aRxBuffer[i] != aTxBufferWrite[i]) | |
| 391 answer = HAL_ERROR; | |
| 392 | |
| 393 for(int i=0;i<6;i++) | |
| 394 if(aRxBuffer[5+i] != answerOkay[i]) | |
| 395 answer = HAL_ERROR; | |
| 396 | |
| 397 answer = HAL_OK; | |
| 398 return answer; | |
| 399 } | |
| 400 | |
| 401 | |
| 402 uint8_t openComm(uint8_t aRxByte) | |
| 403 { | |
| 404 uint8_t answer = 0; | |
| 405 uint8_t service_mode_last_three_bytes[3]; | |
| 406 uint8_t service_mode_response[5] = | |
| 407 { | |
| 408 0x4B, | |
| 409 0xAB, | |
| 410 0xCD, | |
| 411 0xEF, | |
| 412 0x4C | |
| 413 }; | |
| 414 uint8_t download_mode_response[2] = | |
| 415 { | |
| 416 0xBB, | |
| 417 0x4D | |
| 418 }; | |
| 419 | |
| 420 if((aRxByte != BYTE_DOWNLOAD_MODE) && (aRxByte != BYTE_SERVICE_MODE)) | |
| 421 return 0; | |
| 422 | |
| 423 set_globalState(StUART_STANDARD); | |
| 424 | |
| 425 /* service mode is four bytes | |
| 426 0xAA 0xAB 0xCD 0xEF | |
| 427 answer is | |
| 428 */ | |
| 429 | |
| 430 if(aRxByte == BYTE_SERVICE_MODE) | |
| 431 { | |
| 432 if((HAL_UART_Receive(&UartHandle, (uint8_t*)service_mode_last_three_bytes, 3, 2000)!= HAL_OK)) | |
| 433 answer = 0x00; | |
| 434 else | |
| 435 { | |
| 436 if((service_mode_last_three_bytes[0] != 0xAB) || (service_mode_last_three_bytes[1] != 0xCD) || (service_mode_last_three_bytes[2] != 0xEF)) | |
| 437 answer = 0x00; | |
| 438 else | |
| 439 { | |
| 440 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)service_mode_response, 5, 2000)!= HAL_OK) | |
| 441 answer = 0x00; | |
| 442 else | |
| 443 answer = prompt4D4C(receiveStartByteUart); | |
| 444 } | |
| 445 } | |
| 446 } | |
| 447 else //if(aRxByte == BYTE_SERVICE_MODE) | |
| 448 { | |
| 449 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)download_mode_response, 2, 2000)!= HAL_OK) | |
| 450 answer = 0x00; | |
| 451 else | |
| 452 answer = prompt4D4C(receiveStartByteUart); | |
| 453 } | |
| 454 /* | |
| 455 uint8_t debug[256] = {0}; | |
| 456 uint8_t dbgptr = 0; | |
| 457 debug[dbgptr++] = aRxByte; | |
| 458 */ | |
| 459 while((answer == prompt4D4C(receiveStartByteUart)) && (HAL_UART_Receive(&UartHandle, (uint8_t*)&aRxByte, 1, 120000)== HAL_OK)) | |
| 460 { | |
| 461 // debug[dbgptr++] = aRxByte; | |
| 462 answer = select_mode(aRxByte); | |
| 463 } | |
| 464 set_returnFromComm(); | |
| 465 return 1; | |
| 466 } | |
| 467 | |
| 468 | |
| 469 uint8_t prompt4D4C(uint8_t mode) | |
| 470 { | |
| 471 if(mode == BYTE_SERVICE_MODE) | |
| 472 return 0x4C; | |
| 473 else | |
| 474 return 0x4D; | |
| 475 } | |
| 476 | |
| 477 | |
| 478 uint8_t select_mode(uint8_t type) | |
| 479 { | |
| 480 #ifndef BOOTLOADER_STANDALONE | |
| 481 SLogbookHeader logbookHeader; | |
| 482 SLogbookHeaderOSTC3 * plogbookHeaderOSTC3; | |
| 483 SLogbookHeaderOSTC3compact * plogbookHeaderOSTC3compact; | |
| 484 uint32_t sampleTotalLength; | |
| 485 SSettings* pSettings = settingsGetPointer(); | |
| 486 RTC_DateTypeDef sdatestructure; | |
| 487 RTC_TimeTypeDef stimestructure; | |
| 488 #else | |
| 489 uint8_t dummyForBootloader[256] = {0}; | |
| 490 #endif | |
| 491 | |
| 492 uint8_t count; | |
| 493 uint8_t aTxBuffer[128]; | |
| 494 uint8_t aRxBuffer[68]; | |
| 495 uint8_t answer; | |
| 496 aTxBuffer[0] = type; | |
| 497 aTxBuffer[1] = prompt4D4C(receiveStartByteUart); | |
| 498 uint8_t tempHigh, tempLow; | |
| 499 count = 0; | |
| 500 | |
| 501 // service mode only commands | |
| 502 if(receiveStartByteUart == BYTE_SERVICE_MODE) | |
| 503 { | |
| 504 // first part | |
| 505 switch(type) | |
| 506 { | |
| 507 // start communication (again) | |
| 508 case 0xAA: | |
| 509 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 2, 1000)!= HAL_OK) | |
| 510 return 0; | |
| 511 else | |
| 512 return prompt4D4C(receiveStartByteUart); | |
| 513 | |
| 514 /* | |
| 515 // update firmware main preparation | |
| 516 case 0x74: | |
| 517 ext_flash_erase_firmware_if_not_empty(); | |
| 518 break; | |
| 519 | |
| 520 // update firmware main with variable full access memory location preparation | |
| 521 case 0x76: | |
| 522 ext_flash_erase_firmware2_if_not_empty(); | |
| 523 break; | |
| 524 */ | |
| 525 default: | |
| 526 break; | |
| 527 } | |
| 528 | |
| 529 #ifndef BOOTLOADER_STANDALONE | |
| 530 uint32_t logCopyDataPtr = 0; | |
| 531 convert_Type logCopyDataLength; | |
| 532 uint32_t logCopyDataPtrTemp = 0; | |
| 533 uint32_t logCopyDataLengthTemp = 0; | |
| 534 uint8_t logDummyByte = 0; | |
| 535 uint8_t logStepBackwards = 0; | |
| 536 convert16_Type totalDiveCount; | |
| 537 logCopyDataLength.u32bit = 0; | |
| 538 totalDiveCount.u16bit = 0; | |
| 539 #endif | |
| 540 | |
| 541 // Exit communication on Text like RING, CONNECT, ... or 0xFF command | |
| 542 if((type < 0x60) || (type == 0xFF)) | |
| 543 return 0; | |
| 544 | |
| 545 // return of command for (almost) all commands | |
| 546 switch(type) | |
| 547 { | |
| 548 // not supported yet case 0x20: // send hi:lo:temp1 bytes starting from ext_flash_address:3 | |
| 549 // not supported yet case 0x22: // Resets all logbook pointers and the logbook (!) | |
| 550 // not supported yet case 0x23: // Resets battery gauge registers | |
| 551 // not supported yet case 0x30: // write bytes starting from ext_flash_address:3 (Stop when timeout) | |
| 552 // not supported yet case 0x40: // erases 4kB block from ext_flash_address:3 (Warning: No confirmation or built-in security here...) | |
| 553 // not supported yet case 0x42: // erases range in 4kB steps (Get 3 bytes address and 1byte amount of 4kB blocks) | |
| 554 // not supported yet case 0x50: // sends firmware from external flash from 0x3E0000 to 0x3FD000 (118784bytes) via comm | |
| 555 case 0xFE: // hw unit_tests | |
| 556 case 0x71: // hw read manufacturing data | |
| 557 case 0x73: // hw update FLEX | |
| 558 case 0x79: // hw read device data | |
| 559 #ifdef BOOTLOADER_STANDALONE | |
| 560 case 0x74: // hw update Firmware | |
| 561 case 0x75: // hw update RTE | |
| 562 case 0x76: // hw update Fonts | |
| 563 case 0x80: // hw write manufacturing data | |
| 564 case 0x81: // hw write second serial | |
| 565 case 0x82: // hw set bluetooth name | |
| 566 #else | |
| 567 case 0x83: // hw copy logbook entry - read | |
| 568 case 0x84: // hw copy logbook entry - write | |
| 569 case 0x85: // hw read entire logbook memory | |
| 570 case 0x86: // hw overwrite entire logbook memory | |
| 571 case 0x87: // hw ext_flash_repair_SPECIAL_dive_numbers_starting_count_with memory(x) | |
| 572 | |
| 573 #endif | |
| 574 case 0xC1: // Start low-level bootloader | |
| 575 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1, 1000)!= HAL_OK) | |
| 576 return 0; | |
| 577 break; | |
| 578 default: | |
| 579 break; | |
| 580 } | |
| 581 | |
| 582 // now send content or update firmware | |
| 583 switch(type) | |
| 584 { | |
| 585 case 0xFE: | |
| 586 // work to do :-) 12. Oct. 2015 | |
| 587 // 256 bytes output | |
| 588 memset(aTxBuffer,0,128); | |
| 589 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK) | |
| 590 return 0; | |
| 591 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK) | |
| 592 return 0; | |
| 593 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 594 break; | |
| 595 | |
| 596 case 0x71: | |
| 597 memcpy(aTxBuffer,hardwareDataGetPointer(),64); | |
| 598 count += 64; | |
| 599 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 600 break; | |
| 601 | |
| 602 case 0x73: | |
| 603 #ifndef BOOTLOADER_STANDALONE | |
| 604 answer = receive_update_flex(1); | |
| 605 #else | |
| 606 answer = receive_update_flex(0); | |
| 607 #endif | |
| 608 if(answer == 0) | |
| 609 return 0; | |
| 610 else if(answer == 2) // 2 = RTE without bootToBootloader | |
| 611 { | |
| 612 aTxBuffer[0] = 0xFF; | |
| 613 HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000); | |
| 614 return 0; | |
| 615 } | |
| 616 else | |
| 617 { | |
| 618 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 619 if(answer == 1) /* 0xFF is checksum error, 2 = RTE without bootToBootloader */ | |
| 620 { | |
| 621 extern uint8_t bootToBootloader; | |
| 622 bootToBootloader = 1; | |
| 623 } | |
| 624 } | |
| 625 break; | |
| 626 | |
| 627 case 0x79: | |
| 628 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000)!= HAL_OK) | |
| 629 return 0; | |
| 630 ext_flash_read_fixed_16_devicedata_blocks_formated_128byte_total(aTxBuffer); | |
| 631 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK) | |
| 632 return 0; | |
| 633 aTxBuffer[0] = prompt4D4C(receiveStartByteUart); | |
| 634 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000)!= HAL_OK) | |
| 635 return 0; | |
| 636 else | |
| 637 return prompt4D4C(receiveStartByteUart); | |
| 638 | |
| 639 case 0x82: | |
| 640 #ifdef BOOTLOADER_STANDALONE | |
| 641 setForcedBluetoothName = 1; | |
| 642 return 0; | |
| 643 #else | |
| 644 settingsGetPointer()->debugModeOnStart = 1; | |
| 645 extern uint8_t bootToBootloader; | |
| 646 bootToBootloader = 1; | |
| 647 return prompt4D4C(receiveStartByteUart); | |
| 648 #endif | |
| 649 | |
| 650 #ifdef BOOTLOADER_STANDALONE | |
| 651 case 0x74: | |
| 652 answer = receive_update_data_mainCPU_firmware(); | |
| 653 if(answer != 0) | |
| 654 { | |
| 655 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 656 if(answer == 1) // 0xFF is checksum error | |
| 657 { | |
| 658 extern uint8_t bootToBootloader; | |
| 659 bootToBootloader = 1; | |
| 660 } | |
| 661 } | |
| 662 else | |
| 663 return 0; | |
| 664 break; | |
| 665 | |
| 666 case 0x75: | |
| 667 receive_update_data_cpu2(); | |
| 668 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 669 break; | |
| 670 | |
| 671 case 0x76: | |
| 672 answer = receive_update_data_mainCPU_variable_firmware(); | |
| 673 if(answer != 0) | |
| 674 { | |
| 675 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 676 if(answer == 1) // 0xFF is checksum error | |
| 677 { | |
| 678 extern uint8_t bootToBootloader; | |
| 679 bootToBootloader = 1; | |
| 680 } | |
| 681 } | |
| 682 else | |
| 683 return 0; | |
| 684 break; | |
| 685 | |
| 686 case 0x80: | |
| 687 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 52, 5000)!= HAL_OK) | |
| 688 return 0; | |
| 689 if(hardware_programmProductionData(aRxBuffer) == HAL_OK) | |
| 690 { | |
| 691 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 692 } | |
| 693 else | |
| 694 return 0; | |
| 695 break; | |
| 696 | |
| 697 case 0x81: | |
| 698 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 12, 1000)!= HAL_OK) | |
| 699 return 0; | |
| 700 if(hardware_programmSecondarySerial(aRxBuffer) == HAL_OK) | |
| 701 { | |
| 702 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 703 } | |
| 704 else | |
| 705 return 0; | |
| 706 break; | |
| 707 | |
| 708 #else | |
| 709 | |
| 710 #ifdef SPECIALPROGRAMM | |
| 711 case 0x80: | |
| 712 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 52, 5000)!= HAL_OK) | |
| 713 return 0; | |
| 714 if(hardware_programmProductionData(aRxBuffer) == HAL_OK) | |
| 715 { | |
| 716 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 717 } | |
| 718 else | |
| 719 return 0; | |
| 720 break; | |
| 721 #endif | |
| 722 case 0x83: | |
| 723 if(HAL_UART_Receive(&UartHandle, &logStepBackwards, 1, 1000)!= HAL_OK) | |
| 724 return 0; | |
| 725 logCopyDataPtr = getFrame(98); | |
| 726 logCopyDataPtrTemp = logCopyDataPtr; | |
| 727 logCopyDataLength.u32bit = ext_flash_read_dive_raw_with_double_header_1K((uint8_t *)logCopyDataPtr, 1000000,logStepBackwards); | |
| 728 answer = HAL_OK; | |
| 729 if(answer == HAL_OK) | |
| 730 answer = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteLow), 1,2000); | |
| 731 if(answer == HAL_OK) | |
| 732 answer = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteMidLow), 1,2000); | |
| 733 if(answer == HAL_OK) | |
| 734 answer = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteMidHigh), 1,2000); | |
| 735 if(answer == HAL_OK) | |
| 736 answer = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteHigh), 1,2000); | |
| 737 logCopyDataLengthTemp = logCopyDataLength.u32bit; | |
| 738 while((logCopyDataLengthTemp >= 0xFFFF) && (answer == HAL_OK)) | |
| 739 { | |
| 740 answer = HAL_UART_Transmit(&UartHandle, (uint8_t *)logCopyDataPtrTemp, 0xFFFF,30000); | |
| 741 logCopyDataLengthTemp -= 0xFFFF; | |
| 742 logCopyDataPtrTemp += 0xFFFF; | |
| 743 } | |
| 744 if((logCopyDataLengthTemp > 0) && (answer == HAL_OK)) | |
| 745 answer = HAL_UART_Transmit(&UartHandle, (uint8_t *)logCopyDataPtrTemp, (uint16_t)logCopyDataLengthTemp,30000); | |
| 746 releaseFrame(98,logCopyDataPtr); | |
| 747 if(answer == HAL_OK) | |
| 748 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 749 else | |
| 750 return 0; | |
| 751 break; | |
| 752 | |
| 753 case 0x84: | |
| 754 logCopyDataPtr = getFrame(98); | |
| 755 logCopyDataPtrTemp = logCopyDataPtr; | |
| 756 answer = HAL_OK; | |
| 757 if(answer == HAL_OK) | |
| 758 answer = HAL_UART_Receive(&UartHandle, &logDummyByte, 1,2000); | |
| 759 if(answer == HAL_OK) | |
| 760 answer = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteLow), 1,2000); | |
| 761 if(answer == HAL_OK) | |
| 762 answer = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteMidLow), 1,2000); | |
| 763 if(answer == HAL_OK) | |
| 764 answer = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteMidHigh), 1,2000); | |
| 765 if(answer == HAL_OK) | |
| 766 answer = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteHigh), 1,2000); | |
| 767 logCopyDataLengthTemp = logCopyDataLength.u32bit; | |
| 768 while((logCopyDataLengthTemp >= 0xFFFF) && (answer == HAL_OK)) | |
| 769 { | |
| 770 answer = HAL_UART_Receive(&UartHandle, (uint8_t *)logCopyDataPtrTemp, 0xFFFF,30000); | |
| 771 logCopyDataLengthTemp -= 0xFFFF; | |
| 772 logCopyDataPtrTemp += 0xFFFF; | |
| 773 } | |
| 774 if((logCopyDataLengthTemp > 0) && (answer == HAL_OK)) | |
| 775 answer = HAL_UART_Receive(&UartHandle, (uint8_t *)logCopyDataPtrTemp, (uint16_t)logCopyDataLengthTemp,30000); | |
| 776 if(answer == HAL_OK) | |
| 777 ext_flash_write_dive_raw_with_double_header_1K((uint8_t *)logCopyDataPtr, logCopyDataLength.u32bit); | |
| 778 releaseFrame(98,logCopyDataPtr); | |
| 779 if(answer == HAL_OK) | |
| 780 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 781 else | |
| 782 return 0; | |
| 783 break; | |
| 784 | |
| 785 case 0x85: | |
| 786 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 787 logCopyDataPtr = getFrame(98); | |
| 788 ext_flash_read_header_memory((uint8_t *)logCopyDataPtr); | |
| 789 for(int i=0;i<8;i++) | |
| 790 HAL_UART_Transmit(&UartHandle, (uint8_t *)(logCopyDataPtr + (0x8000 * i)), (uint16_t)0x8000,60000); | |
| 791 releaseFrame(98,logCopyDataPtr); | |
| 792 break; | |
| 793 | |
| 794 case 0x86: | |
| 795 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 796 logCopyDataPtr = getFrame(98); | |
| 797 for(int i=0;i<8;i++) | |
| 798 HAL_UART_Receive(&UartHandle, (uint8_t *)(logCopyDataPtr + (0x8000 * i)), (uint16_t)0x8000,60000); | |
| 799 ext_flash_write_header_memory((uint8_t *)logCopyDataPtr); | |
| 800 releaseFrame(98,logCopyDataPtr); | |
| 801 break; | |
| 802 | |
| 803 case 0x87: | |
| 804 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 4, 1000)!= HAL_OK) | |
| 805 return 0; | |
| 806 if(((aRxBuffer[0] ^ aRxBuffer[2]) != 0xFF) || ((aRxBuffer[1] ^ aRxBuffer[3]) != 0xFF)) | |
| 807 return 0; | |
| 808 totalDiveCount.u8bit.byteLow = aRxBuffer[1]; | |
| 809 totalDiveCount.u8bit.byteHigh = aRxBuffer[0]; | |
| 810 ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(totalDiveCount.u16bit); | |
| 811 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 812 break; | |
| 813 #endif | |
| 814 } | |
| 815 | |
| 816 // was service command? Yes, finish and exit | |
| 817 if(count) | |
| 818 { | |
| 819 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, count,10000)!= HAL_OK) | |
| 820 return 0; | |
| 821 else | |
| 822 return prompt4D4C(receiveStartByteUart); | |
| 823 } | |
| 824 } | |
| 825 | |
| 826 | |
| 827 // download mode commands | |
| 828 switch(type) | |
| 829 { | |
| 830 // return of command for almost all commands | |
| 831 case 0x60: // get model + features | |
| 832 case 0x61: // get all headers full (256 bytes) | |
| 833 case 0x62: // set clock | |
| 834 case 0x63: // set custom text | |
| 835 case 0x66: // get dive profile | |
| 836 case 0x69: // get serial, old version numbering, custom text | |
| 837 case 0x6A: // get model | |
| 838 case 0x6B: // get specific firmware version | |
| 839 case 0x6D: // get all compact headers (16 byte) | |
| 840 case 0x6E: // display text | |
| 841 case 0x70: // read min, default, max setting | |
| 842 case 0x72: // read setting | |
| 843 case 0x77: // write setting | |
| 844 case 0x78: // reset all settings | |
| 845 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1, 1000)!= HAL_OK) | |
| 846 return 0; | |
| 847 break; | |
| 848 | |
| 849 // start communication (again) | |
| 850 case 0xBB: | |
| 851 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 2, 1000)!= HAL_OK) | |
| 852 return 0; | |
| 853 else | |
| 854 return prompt4D4C(receiveStartByteUart); | |
| 855 | |
| 856 // stop communication | |
| 857 case 0xFF: | |
| 858 HAL_UART_Transmit(&UartHandle, (uint8_t*)&aTxBuffer, 1, 1000); | |
| 859 return 0; | |
| 860 | |
| 861 default: | |
| 862 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); // hw 160712 | |
| 863 break; | |
| 864 } | |
| 865 | |
| 866 switch(type) | |
| 867 { | |
| 868 case 0x62: | |
| 869 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 6, 2000)!= HAL_OK) | |
| 870 return 0; | |
| 871 break; | |
| 872 case 0x63: | |
| 873 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 60, 5000)!= HAL_OK) | |
| 874 return 0; | |
| 875 break; | |
| 876 case 0x66: | |
| 877 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 1000)!= HAL_OK) | |
| 878 return 0; | |
| 879 break; | |
| 880 case 0x6B: | |
| 881 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 1000)!= HAL_OK) | |
| 882 return 0; | |
| 883 break; | |
| 884 case 0x6E: | |
| 885 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 16, 5000)!= HAL_OK) | |
| 886 return 0; | |
| 887 break; | |
| 888 case 0x77: | |
| 889 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 5, 5000)!= HAL_OK) | |
| 890 return 0; | |
| 891 break; | |
| 892 case 0x72: | |
| 893 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 5000)!= HAL_OK) | |
| 894 return 0; | |
| 895 break; | |
| 896 case 0x70: | |
| 897 if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 5000)!= HAL_OK) | |
| 898 return 0; | |
| 899 break; | |
| 900 } | |
| 901 | |
| 902 switch(type) | |
| 903 { | |
| 904 /* common to standard and bootloader */ | |
| 905 | |
| 906 // get model + features | |
| 907 case 0x60: | |
| 908 aTxBuffer[count++] = 0x00; // hardware descriptor HIGH byte | |
| 909 aTxBuffer[count++] = 0x3B; // hardware descriptor LOW byte // 0x3B is OSTC4 // 0x1A is OTSC3 | |
| 910 aTxBuffer[count++] = 0x00; // feature descriptor HIGH byte | |
| 911 if(getLicence() == LICENCEBONEX) | |
| 912 aTxBuffer[count++] = 0x01; // feature descriptor LOW byte | |
| 913 else | |
| 914 aTxBuffer[count++] = 0x00; // feature descriptor LOW byte | |
| 915 aTxBuffer[count++] = 0x43; // model id | |
| 916 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 917 break; | |
| 918 | |
| 919 // get model | |
| 920 case 0x6A: | |
| 921 aTxBuffer[count++] = 0x3B; // 0x3B is OSTC4 // 0x1A is OTSC3 | |
| 922 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 923 break; | |
| 924 | |
| 925 // get all firmware version and status (OSTC4 only) | |
| 926 case 0x6B: | |
| 927 switch(*aRxBuffer) | |
| 928 { | |
| 929 case 0xFF: | |
| 930 // firmware | |
| 931 aTxBuffer[count++] = firmwareDataGetPointer()->versionFirst; | |
| 932 aTxBuffer[count++] = firmwareDataGetPointer()->versionSecond; | |
| 933 aTxBuffer[count++] = firmwareDataGetPointer()->versionThird; | |
| 934 aTxBuffer[count++] = firmwareDataGetPointer()->versionBeta; | |
| 935 break; | |
| 936 case 0xFE: | |
| 937 // RTE | |
| 938 getActualRTEandFONTversion(&tempHigh, &tempLow, 0, 0); // RTE | |
| 939 aTxBuffer[count++] = tempHigh; | |
| 940 aTxBuffer[count++] = tempLow; | |
| 941 aTxBuffer[count++] = 0; | |
| 942 aTxBuffer[count++] = 0; | |
| 943 break; | |
| 944 case 0x10: | |
| 945 getActualRTEandFONTversion( 0, 0, &tempHigh, &tempLow); // font | |
| 946 aTxBuffer[count++] = tempHigh; | |
| 947 aTxBuffer[count++] = tempLow; | |
| 948 aTxBuffer[count++] = 0; | |
| 949 aTxBuffer[count++] = 0; | |
| 950 break; | |
| 951 default: | |
| 952 // not supported | |
| 953 aTxBuffer[count++] = 0xFF; | |
| 954 aTxBuffer[count++] = 0xFF; | |
| 955 aTxBuffer[count++] = 0xFF; | |
| 956 aTxBuffer[count++] = 0xFF; | |
| 957 break; | |
| 958 /* Jef Driesen Test | |
| 959 default: | |
| 960 // not supported | |
| 961 aTxBuffer[count++] = 0x1; | |
| 962 aTxBuffer[count++] = 0x1; | |
| 963 aTxBuffer[count++] = 0x1; | |
| 964 aTxBuffer[count++] = 0x1; | |
| 965 break; | |
| 966 */ | |
| 967 } | |
| 968 /* | |
| 969 // serial | |
| 970 aTxBuffer[count++] = pSettings->serialLow; | |
| 971 aTxBuffer[count++] = pSettings->serialHigh; | |
| 972 // batch code (date) | |
| 973 hardwareBatchCode(&tempHigh, &tempLow); | |
| 974 aTxBuffer[count++] = tempLow; | |
| 975 aTxBuffer[count++] = tempHigh; | |
| 976 // status and status detail (future feature) | |
| 977 aTxBuffer[count++] = 0; | |
| 978 aTxBuffer[count++] = 0; | |
| 979 aTxBuffer[count++] = 0; | |
| 980 aTxBuffer[count++] = 0; | |
| 981 */ | |
| 982 // prompt | |
| 983 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 984 break; | |
| 985 | |
| 986 // display text | |
| 987 case 0x6E: | |
| 988 for(int i=0;i<16;i++) | |
| 989 display_text[i] = aRxBuffer[i]; | |
| 990 display_text[15] = 0; | |
| 991 display_text[255] = 16; | |
| 992 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 993 break; | |
| 994 | |
| 995 // version / identify | |
| 996 case 0x69: | |
| 997 #ifndef BOOTLOADER_STANDALONE | |
| 998 aTxBuffer[count++] = pSettings->serialLow; | |
| 999 aTxBuffer[count++] = pSettings->serialHigh; | |
| 1000 aTxBuffer[count++] = firmwareVersion_16bit_low(); | |
| 1001 aTxBuffer[count++] = firmwareVersion_16bit_high(); | |
| 1002 memcpy(&aTxBuffer[count], pSettings->customtext, 60); | |
| 1003 #else | |
| 1004 aTxBuffer[count++] = 0;//pSettings->serialLow; | |
| 1005 aTxBuffer[count++] = 0;//pSettings->serialHigh; | |
| 1006 aTxBuffer[count++] = 0;//firmwareVersion_16bit_low(); | |
| 1007 aTxBuffer[count++] = 0;//firmwareVersion_16bit_high(); | |
| 1008 memset(&aTxBuffer[count], 0, 60); | |
| 1009 #endif | |
| 1010 count += 60; | |
| 1011 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1012 break; | |
| 1013 | |
| 1014 #ifndef BOOTLOADER_STANDALONE | |
| 1015 //Reset all setting | |
| 1016 case 0x78: | |
| 1017 set_settings_to_Standard(); | |
| 1018 updateSettingsAndMenuOnExit = 1; | |
| 1019 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1020 break; | |
| 1021 #endif | |
| 1022 | |
| 1023 #ifndef BOOTLOADER_STANDALONE | |
| 1024 // full headers (256 byte) | |
| 1025 case 0x61: | |
| 1026 // for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) // comment Jef Driesen email 15.09.2015 and 3.3.2016 | |
| 1027 for(int StepBackwards = 255; StepBackwards > -1; StepBackwards--) | |
| 1028 { | |
| 1029 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 1030 plogbookHeaderOSTC3 = logbook_build_ostc3header(&logbookHeader); | |
| 1031 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3, 256,5000)!= HAL_OK) | |
| 1032 return 0; | |
| 1033 } | |
| 1034 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1035 break; | |
| 1036 | |
| 1037 // compact headers (16 byte) | |
| 1038 case 0x6D: | |
| 1039 // for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) // comment Jef Driesen email 15.09.2015 and 3.3.2016 | |
| 1040 for(int StepBackwards = 255; StepBackwards > -1; StepBackwards--) | |
| 1041 { | |
| 1042 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 1043 plogbookHeaderOSTC3compact = logbook_build_ostc3header_compact(&logbookHeader); | |
| 1044 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3compact, 16,5000)!= HAL_OK) | |
| 1045 return 0; | |
| 1046 } | |
| 1047 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1048 break; | |
| 1049 | |
| 1050 // set clock & date | |
| 1051 case 0x62: | |
| 1052 // ToDo | |
| 1053 stimestructure.Hours = aRxBuffer[0]; | |
| 1054 stimestructure.Minutes = aRxBuffer[1]; | |
| 1055 stimestructure.Seconds = aRxBuffer[2]; | |
| 1056 sdatestructure.Month = aRxBuffer[3]; | |
| 1057 sdatestructure.Date = aRxBuffer[4]; | |
| 1058 sdatestructure.Year = aRxBuffer[5]; // This parameter must be a number between Min_Data = 0 and Max_Data = 99 | |
| 1059 setWeekday(&sdatestructure); | |
| 1060 | |
| 1061 if( ( stimestructure.Hours < 24 ) | |
| 1062 &&( stimestructure.Minutes < 60 ) | |
| 1063 &&( stimestructure.Seconds < 60 ) | |
| 1064 &&( sdatestructure.Month < 13 ) | |
| 1065 &&( sdatestructure.Date < 32 ) | |
| 1066 &&( sdatestructure.Year < 100 )) | |
| 1067 { | |
| 1068 setTime(stimestructure); | |
| 1069 setDate(sdatestructure); | |
| 1070 set_globalState(StUART_RTECONNECT); | |
| 1071 HAL_Delay(1); | |
| 1072 set_globalState(StUART_STANDARD); | |
| 1073 } | |
| 1074 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1075 break; | |
| 1076 | |
| 1077 case 0x63: | |
| 1078 for(int i=0;i<60;i++) | |
| 1079 pSettings->customtext[i] = aRxBuffer[i]; | |
| 1080 pSettings->customtext[59] = 0; | |
| 1081 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1082 break; | |
| 1083 | |
| 1084 // get dive profile | |
| 1085 case 0x66: | |
| 1086 // logbook_getHeader(aRxBuffer[0], &logbookHeader); // comment Jef Driesen email 15.09.2015 | |
| 1087 logbook_getHeader(255 - aRxBuffer[0], &logbookHeader); | |
| 1088 plogbookHeaderOSTC3 = logbook_build_ostc3header(&logbookHeader); | |
| 1089 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3, 256,5000)!= HAL_OK) | |
| 1090 return 0; | |
| 1091 ext_flash_open_read_sample(255 - aRxBuffer[0], &sampleTotalLength); // comment Jef Driesen email 15.09.2015 about length: changed in externLogbookFlash.c | |
| 1092 while(sampleTotalLength >= 128) | |
| 1093 { | |
| 1094 ext_flash_read_next_sample_part(aTxBuffer,128); | |
| 1095 sampleTotalLength -= 128; | |
| 1096 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK) | |
| 1097 return 0; | |
| 1098 } | |
| 1099 if(sampleTotalLength) | |
| 1100 { | |
| 1101 ext_flash_read_next_sample_part(aTxBuffer,sampleTotalLength); | |
| 1102 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, sampleTotalLength,5000)!= HAL_OK) | |
| 1103 return 0; | |
| 1104 } | |
| 1105 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1106 break; | |
| 1107 | |
| 1108 // read min,default,max setting | |
| 1109 case 0x70: | |
| 1110 count += readDataLimits__8and16BitValues_4and7BytesOutput(aRxBuffer[0],&aTxBuffer[count]); | |
| 1111 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1112 break; | |
| 1113 | |
| 1114 // read setting | |
| 1115 case 0x72: | |
| 1116 readData(aRxBuffer[0],&aTxBuffer[count]); | |
| 1117 count += 4; | |
| 1118 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1119 break; | |
| 1120 | |
| 1121 // write setting | |
| 1122 case 0x77: | |
| 1123 writeData(aRxBuffer); | |
| 1124 updateSettingsAndMenuOnExit = 1; | |
| 1125 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1126 break; | |
| 1127 #else | |
| 1128 /* bootloader dummies */ | |
| 1129 // full headers (256 byte) | |
| 1130 case 0x61: | |
| 1131 for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) | |
| 1132 { | |
| 1133 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 256,5000)!= HAL_OK) | |
| 1134 return 0; | |
| 1135 } | |
| 1136 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1137 break; | |
| 1138 // compact headers (16 byte) | |
| 1139 case 0x6D: | |
| 1140 for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) | |
| 1141 { | |
| 1142 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 16,5000)!= HAL_OK) | |
| 1143 return 0; | |
| 1144 } | |
| 1145 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1146 break; | |
| 1147 // set clock & date | |
| 1148 case 0x62: | |
| 1149 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1150 break; | |
| 1151 // set custom text | |
| 1152 case 0x63: | |
| 1153 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1154 break; | |
| 1155 // get dive profile | |
| 1156 case 0x66: | |
| 1157 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 256,5000)!= HAL_OK) | |
| 1158 return 0; | |
| 1159 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1160 break; | |
| 1161 // read min,default,max setting | |
| 1162 // read settings | |
| 1163 | |
| 1164 | |
| 1165 case 0x72: | |
| 1166 memcpy(&aTxBuffer[count], dummyForBootloader, 4); | |
| 1167 count += 4; | |
| 1168 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1169 break; | |
| 1170 // write settings | |
| 1171 case 0x77: | |
| 1172 aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); | |
| 1173 break; | |
| 1174 #endif | |
| 1175 } | |
| 1176 | |
| 1177 if(count) | |
| 1178 { | |
| 1179 if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, count,10000)!= HAL_OK) | |
| 1180 return 0; | |
| 1181 else | |
| 1182 return prompt4D4C(receiveStartByteUart); | |
| 1183 } | |
| 1184 return 0; | |
| 1185 } | |
| 1186 | |
| 1187 | |
| 1188 HAL_StatusTypeDef receive_uart_large_size(UART_HandleTypeDef *huart, uint8_t *pData, uint32_t Size) | |
| 1189 { | |
| 1190 uint16_t length_16_blocks; | |
| 1191 uint16_t length_16_remainder; | |
| 1192 uint32_t temp; | |
| 1193 HAL_StatusTypeDef result = HAL_OK; | |
| 1194 uint32_t pDataLocal; | |
| 1195 | |
| 1196 length_16_blocks = (uint16_t) (Size / 0xFFFF); | |
| 1197 temp = length_16_blocks; | |
| 1198 temp *= 0xFFFF; | |
| 1199 length_16_remainder = (uint16_t) ( Size - temp); | |
| 1200 | |
| 1201 pDataLocal = (uint32_t)pData; | |
| 1202 | |
| 1203 while((result == HAL_OK) && length_16_blocks) | |
| 1204 { | |
| 1205 result = HAL_UART_Receive(&UartHandle, (uint8_t *)pDataLocal, 0xFFFF , 60000); | |
| 1206 pDataLocal += 0xFFFF; | |
| 1207 length_16_blocks--; | |
| 1208 } | |
| 1209 if((result == HAL_OK) && length_16_remainder) | |
| 1210 { | |
| 1211 result = HAL_UART_Receive(&UartHandle, (uint8_t *)pDataLocal, length_16_remainder , 60000); | |
| 1212 } | |
| 1213 return result; | |
| 1214 } | |
| 1215 | |
| 1216 | |
| 1217 /* for safety reason (memory blocking this code is main and sub */ | |
| 1218 | |
| 1219 #ifdef BOOTLOADER_STANDALONE | |
| 1220 | |
| 1221 uint8_t receive_update_data_cpu2(void) | |
| 1222 { | |
| 1223 uint8_t answer; | |
| 1224 | |
| 1225 uint8_t* pBuffer = (uint8_t*)getFrame(20); | |
| 1226 answer = receive_update_data_cpu2_sub(pBuffer); | |
| 1227 releaseFrame(20,(uint32_t)pBuffer); | |
| 1228 return answer; | |
| 1229 } | |
| 1230 | |
| 1231 | |
| 1232 uint8_t receive_update_data_cpu2_sub(uint8_t* pBuffer) | |
| 1233 { | |
| 1234 uint8_t sBuffer[10]; | |
| 1235 uint32_t length, offsetTotal, pruefsumme, pruefsummeCalc; | |
| 1236 uint8_t id; | |
| 1237 const uint8_t id_RTE = 0xFE; | |
| 1238 | |
| 1239 //Get length | |
| 1240 if(HAL_UART_Receive(&UartHandle, pBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1241 { | |
| 1242 return 0; | |
| 1243 } | |
| 1244 length = 256 * 256 * 256 * (uint32_t)pBuffer[0] + 256 * 256 * (uint32_t)pBuffer[1] + 256 * (uint32_t)pBuffer[2] + pBuffer[3]; | |
| 1245 | |
| 1246 //Get id | |
| 1247 if(HAL_UART_Receive(&UartHandle, pBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1248 { | |
| 1249 return 0; | |
| 1250 } | |
| 1251 id = pBuffer[0]; | |
| 1252 offsetTotal = 256 * 256 * 256 * (uint32_t)pBuffer[0] + 256 * 256 * (uint32_t)pBuffer[1] + 256 * (uint32_t)pBuffer[2] + pBuffer[3]; | |
| 1253 | |
| 1254 // get pruefsumme, bytes are in different order on Dev C++ code!!! | |
| 1255 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1256 { | |
| 1257 return 0; | |
| 1258 } | |
| 1259 pruefsumme = 256 * 256 * 256 * (uint32_t)sBuffer[3] + 256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0]; | |
| 1260 pruefsummeCalc = length + offsetTotal; | |
| 1261 | |
| 1262 // no need to get code if pruefsumme == length is wrong | |
| 1263 if(pruefsummeCalc != pruefsumme) | |
| 1264 { | |
| 1265 return 0; | |
| 1266 } | |
| 1267 | |
| 1268 //get Code | |
| 1269 if(receive_uart_large_size(&UartHandle, pBuffer, length)!= HAL_OK) | |
| 1270 { | |
| 1271 return 0; | |
| 1272 } | |
| 1273 | |
| 1274 //get Checksum | |
| 1275 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 580000 | |
| 1276 { | |
| 1277 return 0; | |
| 1278 } | |
| 1279 uint32_t checksum = 256 * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1280 // uint32_t checksumCalc = crc32c_checksum(pBuffer, length,0,0); | |
| 1281 uint32_t checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer, length/4); | |
| 1282 | |
| 1283 if(checksum != checksumCalc) | |
| 1284 { | |
| 1285 return 0; | |
| 1286 } | |
| 1287 | |
| 1288 if(id != id_RTE) | |
| 1289 { | |
| 1290 strcpy(display_text,"wrong data."); | |
| 1291 display_text[255] = 32; | |
| 1292 return 0; | |
| 1293 } | |
| 1294 | |
| 1295 strcpy(display_text," RTE update."); | |
| 1296 display_text[255] = 32; | |
| 1297 | |
| 1298 return extCPU2bootloader(pBuffer,length,display_text); | |
| 1299 } | |
| 1300 #endif // BOOTLOADER_STANDALONE | |
| 1301 | |
| 1302 | |
| 1303 | |
| 1304 uint8_t receive_update_flex(uint8_t isRTEupdateALLOWED) | |
| 1305 { | |
| 1306 uint8_t answer; | |
| 1307 | |
| 1308 uint8_t* pBuffer1 = (uint8_t*)getFrame(20); | |
| 1309 uint8_t* pBuffer2 = (uint8_t*)getFrame(20); | |
| 1310 | |
| 1311 answer = receive_update_data_flex(pBuffer1, pBuffer2, isRTEupdateALLOWED); | |
| 1312 | |
| 1313 releaseFrame(20,(uint32_t)pBuffer1); | |
| 1314 releaseFrame(20,(uint32_t)pBuffer2); | |
| 1315 | |
| 1316 return answer; | |
| 1317 } | |
| 1318 | |
| 1319 uint8_t receive_update_data_mainCPU_firmware(void) | |
| 1320 { | |
| 1321 uint8_t answer; | |
| 1322 | |
| 1323 uint8_t* pBuffer1 = (uint8_t*)getFrame(20); | |
| 1324 | |
| 1325 answer = receive_update_data_mainCPU_firmware_subrotuine(1, pBuffer1, 0); | |
| 1326 | |
| 1327 releaseFrame(20,(uint32_t)pBuffer1); | |
| 1328 | |
| 1329 return answer; | |
| 1330 } | |
| 1331 | |
| 1332 /* multi buffer (long data) not tested yet */ | |
| 1333 uint8_t receive_update_data_mainCPU_variable_firmware(void) | |
| 1334 { | |
| 1335 uint8_t answer; | |
| 1336 | |
| 1337 uint8_t* pBuffer1 = (uint8_t*)getFrame(20); | |
| 1338 uint8_t* pBuffer2 = (uint8_t*)getFrame(20); | |
| 1339 | |
| 1340 answer = receive_update_data_mainCPU_firmware_subrotuine(2, pBuffer1, pBuffer2); | |
| 1341 | |
| 1342 releaseFrame(20,(uint32_t)pBuffer1); | |
| 1343 releaseFrame(20,(uint32_t)pBuffer2); | |
| 1344 | |
| 1345 return answer; | |
| 1346 } | |
| 1347 | |
| 1348 uint8_t receive_update_data_flex(uint8_t* pBuffer1, uint8_t* pBuffer2, uint8_t RTEupdateALLOWED) | |
| 1349 { | |
| 1350 uint8_t sBuffer[10]; | |
| 1351 uint8_t serialBuffer[10]; | |
| 1352 uint32_t length1, length2, lengthCompare, offsetCompare, ByteCompareStatus; | |
| 1353 uint32_t lengthTotal, offsetTotal, pruefsumme, pruefsummeCalc; | |
|
51
8f8ea3a32e82
Resolved warnings pointing to possible invalid memory access
Ideenmodellierer
parents:
38
diff
changeset
|
1354 uint32_t checksum, checksumCalc = 0; |
| 38 | 1355 uint8_t id; |
| 1356 const uint8_t id_Region1_firmware = 0xFF; | |
| 1357 const uint8_t id_RTE = 0xFE; | |
| 1358 uint8_t textpointer = 0; | |
| 1359 | |
| 1360 //Get length | |
| 1361 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1362 { | |
| 1363 return 0; | |
| 1364 } | |
| 1365 lengthTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1366 | |
| 1367 //Get offset and/or id (id is 0xFF for RTE, 0xFE for firmware and offset if var) | |
| 1368 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1369 { | |
| 1370 return 0; | |
| 1371 } | |
| 1372 id = sBuffer[0]; | |
| 1373 | |
| 1374 pruefsummeCalc = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1375 pruefsummeCalc += lengthTotal; | |
| 1376 //alt, geht nicht mehr wegen Font: pruefsummeCalc = lengthTotal + offsetTotal; | |
| 1377 | |
| 1378 if((id != id_Region1_firmware) && (id != id_RTE) && (id != id_FONT) && (id != id_FONT_OLD)) | |
| 1379 { | |
| 1380 return 0; | |
| 1381 } | |
| 1382 | |
| 1383 // neu 110212 | |
| 1384 if(id == id_FONT) | |
| 1385 offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[1] + 256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[3]; | |
| 1386 else | |
| 1387 offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1388 | |
| 1389 // get pruefsumme, bytes are in different order on Dev C++ code!!! | |
| 1390 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1391 { | |
| 1392 return 0; | |
| 1393 } | |
| 1394 pruefsumme = 256 * 256 * 256 * (uint32_t)sBuffer[3] + 256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0]; | |
| 1395 | |
| 1396 | |
| 1397 if(pruefsummeCalc != pruefsumme) | |
| 1398 { | |
| 1399 uint8_t ptr = 0; | |
| 1400 strcpy(&display_text[ptr]," checksum error"); | |
| 1401 ptr += 15; | |
| 1402 strcpy(&display_text[ptr],"\n\r"); | |
| 1403 ptr += 2; | |
| 1404 ptr += gfx_number_to_string(10,0,&display_text[ptr],checksumCalc); | |
| 1405 display_text[ptr] = 0; | |
| 1406 display_text[255] = ptr + 1; | |
| 1407 return 0xFF; | |
| 1408 } | |
| 1409 | |
| 1410 //Get serial (new since 160211) | |
| 1411 if(HAL_UART_Receive(&UartHandle, serialBuffer, 4,5000)!= HAL_OK) | |
| 1412 { | |
| 1413 return 0; | |
| 1414 } | |
| 1415 | |
| 1416 if(lengthTotal > 768000) | |
| 1417 { | |
| 1418 length1 = 768000; | |
| 1419 length2 = lengthTotal - length1; | |
| 1420 } | |
| 1421 else | |
| 1422 { | |
| 1423 length1 = lengthTotal; | |
| 1424 length2 = 0; | |
| 1425 } | |
| 1426 | |
| 1427 if((pBuffer2 == 0) && (length2 != 0)) | |
| 1428 return 0; | |
| 1429 | |
| 1430 //get Code | |
| 1431 if(receive_uart_large_size(&UartHandle, pBuffer1, length1)!= HAL_OK) | |
| 1432 return 0; | |
| 1433 | |
| 1434 if(length2) | |
| 1435 if(receive_uart_large_size(&UartHandle, pBuffer2, length2)!= HAL_OK) | |
| 1436 return 0; | |
| 1437 | |
| 1438 //get Checksum | |
| 1439 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1440 return 0; | |
| 1441 | |
| 1442 checksum = 256 * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1443 // uint32_t checksumCalc = crc32c_checksum(pBuffer1, length1, pBuffer2, length2); | |
| 1444 if(length2) | |
| 1445 checksumCalc = CRC_CalcBlockCRC_moreThan768000((uint32_t*)pBuffer1, (uint32_t*)pBuffer2, lengthTotal/4); | |
| 1446 else | |
| 1447 checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer1, length1/4); | |
| 1448 | |
| 1449 /* check id now */ | |
| 1450 /* | |
| 1451 if(region == 2) | |
| 1452 { | |
| 1453 if((id == id_Region1_firmware) || (id == id_RTE)) | |
| 1454 { | |
| 1455 strcpy(display_text,"wrong data."); | |
| 1456 display_text[255] = 32; | |
| 1457 return 0; | |
| 1458 } | |
| 1459 } | |
| 1460 else | |
| 1461 { | |
| 1462 if(id != id_Region1_firmware) | |
| 1463 { | |
| 1464 strcpy(display_text,"wrong data."); | |
| 1465 display_text[255] = 32; | |
| 1466 return 0; | |
| 1467 } | |
| 1468 } | |
| 1469 */ | |
| 1470 /* test checksum */ | |
| 1471 if(checksum != checksumCalc) | |
| 1472 { | |
| 1473 uint8_t ptr = 0; | |
| 1474 strcpy(&display_text[ptr]," pruefsummen error"); | |
| 1475 ptr += 15; | |
| 1476 strcpy(&display_text[ptr],"\n\r"); | |
| 1477 display_text[ptr] = 0; | |
| 1478 display_text[255] = ptr + 1; | |
| 1479 return 0xFF; | |
| 1480 } | |
| 1481 | |
| 1482 if(id == id_Region1_firmware) | |
| 1483 { | |
| 1484 uint8_t ptr = 0; | |
| 1485 display_text[ptr++] = 'V'; | |
| 1486 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10000] & 0x1F); | |
| 1487 display_text[ptr++] = '.'; | |
| 1488 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10001] & 0x1F); | |
| 1489 display_text[ptr++] = '.'; | |
| 1490 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10002] & 0x1F); | |
| 1491 display_text[ptr++] = ' '; | |
| 1492 if(pBuffer1[0x10003]) | |
| 1493 { | |
| 1494 strcpy(&display_text[ptr],"beta "); | |
| 1495 ptr +=5; | |
| 1496 } | |
| 1497 strcpy(&display_text[ptr],"\n\rpreparing for install."); | |
| 1498 ptr += 25; // circa ungef�hr | |
| 1499 display_text[255] = ptr + 1; | |
| 1500 } | |
| 1501 else if(id == id_RTE) | |
| 1502 { | |
| 1503 if(RTEupdateALLOWED) | |
| 1504 { | |
| 1505 strcpy(display_text," RTE update.\n\r"); | |
| 1506 textpointer = 0; | |
| 1507 while((display_text[textpointer] != 0) && (textpointer < 50)) | |
| 1508 textpointer++; | |
| 1509 #ifndef BOOTLOADER_STANDALONE | |
| 1510 if(textpointer < 50) | |
| 1511 { | |
| 1512 // display_text[textpointer++] = | |
| 1513 display_text[textpointer++] = '\025'; | |
| 1514 display_text[textpointer++] = TXT_2BYTE; | |
| 1515 display_text[textpointer++] = TXT2BYTE_DecoDataLost; | |
| 1516 display_text[textpointer] = 0; | |
| 1517 } | |
| 1518 #endif | |
| 1519 display_text[255] = textpointer+1; | |
| 1520 return extCPU2bootloader(pBuffer1,length1,display_text); | |
| 1521 } | |
| 1522 else | |
| 1523 return 0xFF; | |
| 1524 } | |
| 1525 else | |
| 1526 //if(region == 2) | |
| 1527 { | |
| 1528 uint8_t ptr = 0; | |
| 1529 ptr += gfx_number_to_string(7,0,&display_text[ptr],lengthTotal); | |
| 1530 strcpy(&display_text[ptr]," bytes with "); | |
| 1531 ptr += 12; | |
| 1532 ptr += gfx_number_to_string(7,0,&display_text[ptr],offsetTotal); | |
| 1533 strcpy(&display_text[ptr]," offset"); | |
| 1534 ptr += 7; | |
| 1535 strcpy(&display_text[ptr],"\n\rpreparing for install."); | |
| 1536 ptr += 25; // circa ungef�hr | |
| 1537 display_text[255] = ptr + 1; | |
| 1538 } | |
| 1539 | |
| 1540 | |
| 1541 // only non RTE !! | |
| 1542 uint8_t* pBufferCompare = (uint8_t*)getFrame(20); | |
| 1543 ByteCompareStatus = 0; | |
| 1544 | |
| 1545 if(id == id_Region1_firmware) | |
| 1546 { | |
| 1547 /* standard firmware limited to 768000 */ | |
| 1548 if(ext_flash_read_firmware(pBufferCompare,4,0) != 0xFFFFFFFF) | |
| 1549 ext_flash_erase_firmware(); | |
| 1550 ext_flash_write_firmware(pBuffer1, length1); | |
| 1551 lengthCompare = ext_flash_read_firmware(pBufferCompare,768000,0); | |
| 1552 | |
| 1553 if(lengthCompare != length1) | |
| 1554 ByteCompareStatus = 10000; | |
| 1555 for(int i = 0; i < length1; i++) | |
| 1556 { | |
| 1557 if(pBuffer1[0] != pBufferCompare[0]) | |
| 1558 ByteCompareStatus++; | |
| 1559 } | |
| 1560 } | |
| 1561 else | |
| 1562 //if(region == 2) | |
| 1563 { | |
| 1564 /* upper region firmware can be larger (1MB) */ | |
| 1565 if(ext_flash_read_firmware2(0, pBufferCompare,4, 0,0) != 0xFFFFFFFF) | |
| 1566 ext_flash_erase_firmware2(); | |
| 1567 ext_flash_write_firmware2(offsetTotal, pBuffer1, length1, pBuffer2, length2); | |
| 1568 lengthCompare = ext_flash_read_firmware2(&offsetCompare, pBufferCompare,768000, 0,768000); | |
| 1569 | |
| 1570 if(lengthCompare != length1 + length2) | |
| 1571 ByteCompareStatus = 10000; | |
| 1572 if(offsetTotal != offsetCompare) | |
| 1573 ByteCompareStatus += 20000; | |
| 1574 for(int i = 0; i < length1; i++) | |
| 1575 { | |
| 1576 if(pBuffer1[0] != pBufferCompare[0]) | |
| 1577 ByteCompareStatus++; | |
| 1578 } | |
| 1579 | |
| 1580 lengthCompare = ext_flash_read_firmware2(0, 0,768000, pBufferCompare,768000); | |
| 1581 for(int i = 0; i < length2; i++) | |
| 1582 { | |
| 1583 if(pBuffer2[0] != pBufferCompare[0]) | |
| 1584 ByteCompareStatus++; | |
| 1585 } | |
| 1586 } | |
| 1587 | |
| 1588 releaseFrame(20,(uint32_t)pBufferCompare); | |
| 1589 | |
| 1590 if(ByteCompareStatus != 0) | |
| 1591 { | |
| 1592 strcpy(&display_text[0],"\n\rcopy error."); | |
| 1593 display_text[255] = 21; | |
| 1594 return 0; | |
| 1595 } | |
| 1596 else | |
| 1597 { | |
| 1598 strcpy(&display_text[0],"\n\rready to install."); | |
| 1599 display_text[255] = 21; | |
| 1600 return 1; | |
| 1601 } | |
| 1602 } | |
| 1603 | |
| 1604 | |
| 1605 uint8_t receive_update_data_mainCPU_firmware_subrotuine(uint8_t region, uint8_t* pBuffer1, uint8_t* pBuffer2) | |
| 1606 { | |
| 1607 uint8_t sBuffer[10]; | |
| 1608 uint32_t length1, length2, lengthCompare, offsetCompare, ByteCompareStatus; | |
| 1609 uint32_t lengthTotal, offsetTotal, pruefsumme, pruefsummeCalc; | |
| 1610 uint32_t checksum, checksumCalc; | |
| 1611 uint8_t id; | |
| 1612 | |
| 1613 | |
| 1614 //Get length | |
| 1615 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1616 return 0; | |
| 1617 | |
| 1618 lengthTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1619 | |
| 1620 //Get offset and/or id (id is 0xFF for RTE, 0xFE for firmware and offset if var) | |
| 1621 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1622 return 0; | |
| 1623 | |
| 1624 id = sBuffer[0]; | |
| 1625 | |
| 1626 pruefsummeCalc = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1627 pruefsummeCalc += lengthTotal; | |
| 1628 | |
| 1629 if((id != id_Region1_firmware) && (id != id_RTE) && (id != id_FONT) && (id != id_FONT_OLD)) | |
| 1630 return 0; | |
| 1631 | |
| 1632 if(id == id_FONT) | |
| 1633 offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[1] + 256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[3]; | |
| 1634 // alt, prior to id for font | |
| 1635 else | |
| 1636 offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1637 | |
| 1638 // get pruefsumme, bytes are in different order on Dev C++ code!!! | |
| 1639 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1640 return 0; | |
| 1641 | |
| 1642 pruefsumme = 256 * 256 * 256 * (uint32_t)sBuffer[3] + 256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0]; | |
| 1643 | |
| 1644 //alt: pruefsummeCalc = lengthTotal + offsetTotal; | |
| 1645 | |
| 1646 if(pruefsummeCalc != pruefsumme) | |
| 1647 { | |
| 1648 uint8_t ptr = 0; | |
| 1649 strcpy(&display_text[ptr]," checksum error"); | |
| 1650 ptr += 15; | |
| 1651 strcpy(&display_text[ptr],"\n\r"); | |
| 1652 ptr += 2; | |
| 1653 ptr += gfx_number_to_string(10,0,&display_text[ptr],checksumCalc); | |
| 1654 display_text[ptr] = 0; | |
| 1655 display_text[255] = ptr + 1; | |
| 1656 return 0xFF; | |
| 1657 } | |
| 1658 | |
| 1659 if(lengthTotal > 768000) | |
| 1660 { | |
| 1661 length1 = 768000; | |
| 1662 length2 = lengthTotal - length1; | |
| 1663 } | |
| 1664 else | |
| 1665 { | |
| 1666 length1 = lengthTotal; | |
| 1667 length2 = 0; | |
| 1668 } | |
| 1669 | |
| 1670 if((pBuffer2 == 0) && (length2 != 0)) | |
| 1671 return 0; | |
| 1672 | |
| 1673 //get Code | |
| 1674 if(receive_uart_large_size(&UartHandle, pBuffer1, length1)!= HAL_OK) | |
| 1675 return 0; | |
| 1676 | |
| 1677 if(length2) | |
| 1678 if(receive_uart_large_size(&UartHandle, pBuffer2, length2)!= HAL_OK) | |
| 1679 return 0; | |
| 1680 | |
| 1681 //get Checksum | |
| 1682 if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000 | |
| 1683 return 0; | |
| 1684 | |
| 1685 checksum = 256 * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3]; | |
| 1686 // uint32_t checksumCalc = crc32c_checksum(pBuffer1, length1, pBuffer2, length2); | |
| 1687 if(length2) | |
| 1688 checksumCalc = CRC_CalcBlockCRC_moreThan768000((uint32_t*)pBuffer1, (uint32_t*)pBuffer2, lengthTotal/4); | |
| 1689 else | |
| 1690 checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer1, length1/4); | |
| 1691 | |
| 1692 /* check id now */ | |
| 1693 if(region == 2) | |
| 1694 { | |
| 1695 if((id == id_Region1_firmware) || (id == id_RTE)) | |
| 1696 { | |
| 1697 strcpy(display_text,"wrong data."); | |
| 1698 display_text[255] = 32; | |
| 1699 return 0; | |
| 1700 } | |
| 1701 } | |
| 1702 else | |
| 1703 { | |
| 1704 if(id != id_Region1_firmware) | |
| 1705 { | |
| 1706 strcpy(display_text,"wrong data."); | |
| 1707 display_text[255] = 32; | |
| 1708 return 0; | |
| 1709 } | |
| 1710 } | |
| 1711 | |
| 1712 /* test checksum */ | |
| 1713 if(checksum != checksumCalc) | |
| 1714 { | |
| 1715 uint8_t ptr = 0; | |
| 1716 strcpy(&display_text[ptr]," pruefsummen error"); | |
| 1717 ptr += 15; | |
| 1718 strcpy(&display_text[ptr],"\n\r"); | |
| 1719 display_text[ptr] = 0; | |
| 1720 display_text[255] = ptr + 1; | |
| 1721 return 0xFF; | |
| 1722 } | |
| 1723 | |
| 1724 if(region == 2) | |
| 1725 { | |
| 1726 uint8_t ptr = 0; | |
| 1727 ptr += gfx_number_to_string(7,0,&display_text[ptr],lengthTotal); | |
| 1728 strcpy(&display_text[ptr]," bytes with "); | |
| 1729 ptr += 12; | |
| 1730 ptr += gfx_number_to_string(7,0,&display_text[ptr],offsetTotal); | |
| 1731 strcpy(&display_text[ptr]," offset"); | |
| 1732 ptr += 7; | |
| 1733 strcpy(&display_text[ptr],"\n\rpreparing for install."); | |
| 1734 ptr += 25; // circa ungef�hr | |
| 1735 display_text[255] = ptr + 1; | |
| 1736 | |
| 1737 } | |
| 1738 else | |
| 1739 { | |
| 1740 uint8_t ptr = 0; | |
| 1741 display_text[ptr++] = 'V'; | |
| 1742 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10000] & 0x1F); | |
| 1743 display_text[ptr++] = '.'; | |
| 1744 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10001] & 0x1F); | |
| 1745 display_text[ptr++] = '.'; | |
| 1746 ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10002] & 0x1F); | |
| 1747 display_text[ptr++] = ' '; | |
| 1748 if(pBuffer1[0x10003]) | |
| 1749 { | |
| 1750 strcpy(&display_text[ptr],"beta "); | |
| 1751 ptr +=5; | |
| 1752 } | |
| 1753 strcpy(&display_text[ptr],"\n\rpreparing for install."); | |
| 1754 ptr += 25; // circa ungef�hr | |
| 1755 display_text[255] = ptr + 1; | |
| 1756 } | |
| 1757 | |
| 1758 uint8_t* pBufferCompare = (uint8_t*)getFrame(20); | |
| 1759 ByteCompareStatus = 0; | |
| 1760 | |
| 1761 if(region == 2) | |
| 1762 { | |
| 1763 /* upper region firmware can be larger (1MB) */ | |
| 1764 if(ext_flash_read_firmware2(0, pBufferCompare,4, 0,0) != 0xFFFFFFFF) | |
| 1765 ext_flash_erase_firmware2(); | |
| 1766 ext_flash_write_firmware2(offsetTotal, pBuffer1, length1, pBuffer2, length2); | |
| 1767 lengthCompare = ext_flash_read_firmware2(&offsetCompare, pBufferCompare,768000, 0,768000); | |
| 1768 | |
| 1769 if(lengthCompare != length1 + length2) | |
| 1770 ByteCompareStatus = 10000; | |
| 1771 if(offsetTotal != offsetCompare) | |
| 1772 ByteCompareStatus += 20000; | |
| 1773 for(int i = 0; i < length1; i++) | |
| 1774 { | |
| 1775 if(pBuffer1[0] != pBufferCompare[0]) | |
| 1776 ByteCompareStatus++; | |
| 1777 } | |
| 1778 | |
| 1779 lengthCompare = ext_flash_read_firmware2(0, 0,768000, pBufferCompare,768000); | |
| 1780 for(int i = 0; i < length2; i++) | |
| 1781 { | |
| 1782 if(pBuffer2[0] != pBufferCompare[0]) | |
| 1783 ByteCompareStatus++; | |
| 1784 } | |
| 1785 } | |
| 1786 else | |
| 1787 { | |
| 1788 /* standard firmware limited to 768000 */ | |
| 1789 if(ext_flash_read_firmware(pBufferCompare,4,0) != 0xFFFFFFFF) | |
| 1790 ext_flash_erase_firmware(); | |
| 1791 ext_flash_write_firmware(pBuffer1, length1); | |
| 1792 lengthCompare = ext_flash_read_firmware(pBufferCompare,768000,0); | |
| 1793 | |
| 1794 if(lengthCompare != length1) | |
| 1795 ByteCompareStatus = 10000; | |
| 1796 for(int i = 0; i < length1; i++) | |
| 1797 { | |
| 1798 if(pBuffer1[0] != pBufferCompare[0]) | |
| 1799 ByteCompareStatus++; | |
| 1800 } | |
| 1801 } | |
| 1802 | |
| 1803 releaseFrame(20,(uint32_t)pBufferCompare); | |
| 1804 | |
| 1805 if(ByteCompareStatus != 0) | |
| 1806 { | |
| 1807 strcpy(&display_text[0],"\n\rcopy error."); | |
| 1808 display_text[255] = 21; | |
| 1809 return 0; | |
| 1810 } | |
| 1811 else | |
| 1812 { | |
| 1813 strcpy(&display_text[0],"\n\rready to install."); | |
| 1814 display_text[255] = 21; | |
| 1815 return 1; | |
| 1816 } | |
| 1817 } | |
| 1818 | |
| 1819 static void tComm_Error_Handler(void) | |
| 1820 { | |
| 1821 while(1) | |
| 1822 {} | |
| 1823 } |