Mercurial > public > ostc4
annotate Small_CPU/Inc/uart.h @ 780:e40790a67165
Discovery<=>SmallCPU inferface update:
The sensor data struct is extended to store the data of up to three (three visible O2 sensors). To avoid unnecessary payload on the SPI only the last update sensor data item is transfered. The sender receiver uses the sensor ID which is provided in parallel to identify the correct storage location.
author | Ideenmodellierer |
---|---|
date | Tue, 23 May 2023 21:50:19 +0200 |
parents | 0b5f45448eb6 |
children | bb37d4f3e50e |
rev | line source |
---|---|
38 | 1 /** |
2 ****************************************************************************** | |
3 * @file uart.h | |
4 * @author heinrichs weikamp gmbh | |
5 * @version V0.0.1 | |
6 * @date 27-March-2014 | |
7 * @brief button control | |
8 * | |
9 ****************************************************************************** | |
10 * @attention | |
11 * | |
12 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
13 * | |
14 ****************************************************************************** | |
15 */ | |
16 | |
17 /* Define to prevent recursive inclusion -------------------------------------*/ | |
18 #ifndef UART_H | |
19 #define UART_H | |
20 | |
21 #ifdef __cplusplus | |
22 extern "C" { | |
23 #endif | |
24 | |
25 #include "stm32f4xx_hal.h" | |
26 | |
662 | 27 |
28 typedef enum | |
29 { | |
30 RX_Ready= 0, /* Initial state */ | |
690 | 31 RX_DetectStart, /* validate start byte */ |
32 RX_SelectData, /* Data contained in this frame */ | |
662 | 33 RX_Data0, /* Process incoming data */ |
34 RX_Data1, | |
35 RX_Data2, | |
36 RX_Data3, | |
37 RX_Data4, | |
690 | 38 RX_Data5, |
39 RX_Data6, | |
40 RX_Data7, | |
41 RX_Data8, | |
42 RX_Data9, | |
43 RX_Data10, | |
44 RX_Data11, | |
45 RX_Data12, | |
662 | 46 RX_DataComplete |
47 } receiveState_t; | |
48 | |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
49 typedef enum |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
50 { |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
51 UART_O2_INIT = 0, |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
52 UART_O2_CHECK, /* send blink command and check if sensor answers */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
53 UART_O2_REQ_INFO, /* request information about available internal sensors of sensor */ |
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
704
diff
changeset
|
54 UART_O2_REQ_ID, /* request ID of sensor */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
55 UART_O2_IDLE, /* sensor detected and no communication pending */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
56 UART_O2_REQ_O2, /* O2 value has been requested and is in receiption progress */ |
721 | 57 UART_O2_REQ_RAW, /* Request O2 and extended raw data */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
58 UART_O2_ERROR /* Error state which could not be resolved => only exit via de-/activation cycle */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
59 } uartO2Status_t; |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
60 |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
61 |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
62 typedef enum |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
63 { |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
64 O2RX_IDLE = 0, /* no reception pending */ |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
65 O2RX_CONFIRM, /* check the command echo */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
66 O2RX_GETNR, /* extract the sensor number */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
67 O2RX_GETO2, /* extract the ppo2 */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
68 O2RX_GETTEMP, /* extract the temperature */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
69 O2RX_GETSTATUS, /* extract the sensor status */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
70 O2RX_GETTYPE, /* extract the sensor type (should be 8) */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
71 O2RX_GETCHANNEL, /* extract the number of sensor channels (should be 1) */ |
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
72 O2RX_GETVERSION, /* extract the sensor version */ |
721 | 73 O2RX_GETSUBSENSORS, /* extract the available measures (O2, temperature, humidity etc) */ |
74 O2RX_GETDPHI, /* extract phase shift */ | |
75 O2RX_INTENSITY, /* extract intensity of signal */ | |
76 O2RX_AMBIENTLIGHT, /* extract the intensity of the ambient light */ | |
77 O2RX_PRESSURE, /* extract pressor within the sensor housing */ | |
78 O2RX_HUMIDITY /* extract humidity within the sensor housing */ | |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
79 } uartO2RxState_t; |
662 | 80 |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
81 |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
82 |
662 | 83 void MX_USART1_UART_Init(void); |
84 void MX_USART1_UART_DeInit(void); | |
85 void MX_USART1_DMA_Init(void); | |
38 | 86 uint8_t UART_ButtonAdjust(uint8_t *array); |
742 | 87 void UART_StartDMA_Receiption(void); |
690 | 88 #ifdef ENABLE_CO2_SUPPORT |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
89 void UART_HandleCO2Data(void); |
690 | 90 #endif |
91 #ifdef ENABLE_SENTINEL_MODE | |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
92 void UART_HandleSentinelData(void); |
690 | 93 #endif |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
94 void UART_HandleDigitalO2(void); |
779
0b5f45448eb6
Added UART multiplexer support for DiveO2:
Ideenmodellierer
parents:
742
diff
changeset
|
95 void UART_MapDigO2_Channel(uint8_t channel, uint8_t muxAddress); |
0b5f45448eb6
Added UART multiplexer support for DiveO2:
Ideenmodellierer
parents:
742
diff
changeset
|
96 void UART_SetDigO2_Channel(uint8_t channel); |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
97 uint8_t UART_isDigO2Connected(); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
98 uint8_t UART_isCO2Connected(); |
742 | 99 uint8_t UART_isSentinelConnected(); |
729
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
100 void UART_setTargetChannel(uint8_t channel); |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
101 |
d646a0f724a7
Added auto detection functionality for sensors connected to the external interface:
Ideenmodellierer
parents:
721
diff
changeset
|
102 |
704
f1b40364b0af
Added protocol functions for UART DiveO2 sensor:
Ideenmodellierer
parents:
690
diff
changeset
|
103 |
38 | 104 #ifdef __cplusplus |
105 } | |
106 #endif | |
107 | |
108 #endif /* UART_H */ | |
109 | |
110 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |