38
+ − 1 /**
+ − 2 ******************************************************************************
+ − 3 * @file GPIO/GPIO_IOToggle/Inc/stm32f4xx_hal_conf.h
+ − 4 * @author MCD Application Team
+ − 5 * @version V1.1.0
+ − 6 * @date 26-June-2014
+ − 7 * @brief HAL configuration file.
+ − 8 ******************************************************************************
+ − 9 * @attention
+ − 10 *
+ − 11 * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ − 12 *
+ − 13 * Redistribution and use in source and binary forms, with or without modification,
+ − 14 * are permitted provided that the following conditions are met:
+ − 15 * 1. Redistributions of source code must retain the above copyright notice,
+ − 16 * this list of conditions and the following disclaimer.
+ − 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
+ − 18 * this list of conditions and the following disclaimer in the documentation
+ − 19 * and/or other materials provided with the distribution.
+ − 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ − 21 * may be used to endorse or promote products derived from this software
+ − 22 * without specific prior written permission.
+ − 23 *
+ − 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ − 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ − 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ − 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ − 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ − 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ − 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ − 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ − 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ − 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ − 34 *
+ − 35 ******************************************************************************
+ − 36 */
+ − 37
+ − 38 /* Define to prevent recursive inclusion -------------------------------------*/
+ − 39 #ifndef STM32F4xx_HAL_CONF_H
+ − 40 #define STM32F4xx_HAL_CONF_H
+ − 41
+ − 42 #ifdef __cplusplus
+ − 43 extern "C" {
+ − 44 #endif
+ − 45
+ − 46 /* Exported types ------------------------------------------------------------*/
+ − 47 /* Exported constants --------------------------------------------------------*/
+ − 48
+ − 49 /* ######################### Hardware Selection ############################## */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 50 /* #define STM32F411xE now defined in preprocessor */
38
+ − 51
+ − 52 /* ########################## Module Selection ############################## */
+ − 53 /**
+ − 54 * @brief This is the list of modules to be used in the HAL driver
+ − 55 */
+ − 56 #define HAL_MODULE_ENABLED
+ − 57 #define HAL_ADC_MODULE_ENABLED
+ − 58 /* #define HAL_CAN_MODULE_ENABLED */
+ − 59 /* #define HAL_CRC_MODULE_ENABLED */
+ − 60 /* #define HAL_CRYP_MODULE_ENABLED */
+ − 61 /* #define HAL_DAC_MODULE_ENABLED */
+ − 62 /* #define HAL_DCMI_MODULE_ENABLED */
+ − 63 #define HAL_DMA_MODULE_ENABLED
+ − 64 /* #define HAL_DMA2D_MODULE_ENABLED */
+ − 65 /* #define HAL_ETH_MODULE_ENABLED */
+ − 66 #define HAL_FLASH_MODULE_ENABLED
+ − 67 /* #define HAL_NAND_MODULE_ENABLED */
+ − 68 /* #define HAL_NOR_MODULE_ENABLED */
+ − 69 /* #define HAL_PCCARD_MODULE_ENABLED */
+ − 70 /* #define HAL_SRAM_MODULE_ENABLED */
+ − 71 /* #define HAL_SDRAM_MODULE_ENABLED */
+ − 72 /* #define HAL_HASH_MODULE_ENABLED */
+ − 73 #define HAL_GPIO_MODULE_ENABLED
+ − 74 #define HAL_I2C_MODULE_ENABLED
+ − 75 /* #define HAL_I2S_MODULE_ENABLED */
+ − 76 /* #define HAL_IWDG_MODULE_ENABLED */
+ − 77 /* #define HAL_LTDC_MODULE_ENABLED */
+ − 78 #define HAL_PWR_MODULE_ENABLED
+ − 79 #define HAL_RCC_MODULE_ENABLED
+ − 80 /* #define HAL_RNG_MODULE_ENABLED */
+ − 81 #define HAL_RTC_MODULE_ENABLED
+ − 82 /* #define HAL_SAI_MODULE_ENABLED */
+ − 83 /* #define HAL_SD_MODULE_ENABLED */
+ − 84 #define HAL_SPI_MODULE_ENABLED
+ − 85 /* #define HAL_TIM_MODULE_ENABLED */
+ − 86 #define HAL_UART_MODULE_ENABLED
+ − 87 /* #define HAL_USART_MODULE_ENABLED */
+ − 88 /* #define HAL_IRDA_MODULE_ENABLED */
+ − 89 /* #define HAL_SMARTCARD_MODULE_ENABLED*/
+ − 90 /* #define HAL_WWDG_MODULE_ENABLED */
+ − 91 #define HAL_CORTEX_MODULE_ENABLED
+ − 92 /* #define HAL_PCD_MODULE_ENABLED */
+ − 93 /* #define HAL_HCD_MODULE_ENABLED */
+ − 94
+ − 95
+ − 96 /* ########################## HSE/HSI Values adaptation ##################### */
+ − 97 /**
+ − 98 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ − 99 * This value is used by the RCC HAL module to compute the system frequency
+ − 100 * (when HSE is used as system clock source, directly or through the PLL).
+ − 101 */
+ − 102 #if !defined (HSE_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 103 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
38
+ − 104 #endif /* HSE_VALUE */
+ − 105
+ − 106 #if !defined (HSE_STARTUP_TIMEOUT)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 107 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */
38
+ − 108 #endif /* HSE_STARTUP_TIMEOUT */
+ − 109
+ − 110 /**
+ − 111 * @brief Internal High Speed oscillator (HSI) value.
+ − 112 * This value is used by the RCC HAL module to compute the system frequency
+ − 113 * (when HSI is used as system clock source, directly or through the PLL).
+ − 114 */
+ − 115 #if !defined (HSI_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 116 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
38
+ − 117 #endif /* HSI_VALUE */
+ − 118
+ − 119 /**
+ − 120 * @brief Internal Low Speed oscillator (LSI) value.
+ − 121 */
+ − 122 #if !defined (LSI_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 123 #define LSI_VALUE ((uint32_t)40000U)
38
+ − 124 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ − 125 The real value may vary depending on the variations
+ − 126 in voltage and temperature. */
+ − 127 /**
+ − 128 * @brief External Low Speed oscillator (LSE) value.
+ − 129 */
+ − 130 #if !defined (LSE_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 131 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
38
+ − 132 #endif /* LSE_VALUE */
+ − 133
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 134 #if !defined (LSE_STARTUP_TIMEOUT)
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 135 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 136 #endif /* LSE_STARTUP_TIMEOUT */
38
+ − 137 /**
+ − 138 * @brief External clock source for I2S peripheral
+ − 139 * This value is used by the I2S HAL module to compute the I2S clock source
+ − 140 * frequency, this source is inserted directly through I2S_CKIN pad.
+ − 141 */
+ − 142 #if !defined (EXTERNAL_CLOCK_VALUE)
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 143 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
38
+ − 144 #endif /* EXTERNAL_CLOCK_VALUE */
+ − 145
+ − 146 /* Tip: To avoid modifying this file each time you need to use different HSE,
+ − 147 === you can define the HSE value in your toolchain compiler preprocessor. */
+ − 148
+ − 149 /* ########################### System Configuration ######################### */
+ − 150 /**
+ − 151 * @brief This is the HAL system configuration section
+ − 152 */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 153 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
38
+ − 154 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 155 #define USE_RTOS 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 156 #define PREFETCH_ENABLE 1U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 157 #define INSTRUCTION_CACHE_ENABLE 1U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 158 #define DATA_CACHE_ENABLE 1U
38
+ − 159
+ − 160 /* ########################## Assert Selection ############################## */
+ − 161 /**
+ − 162 * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ − 163 * HAL drivers code
+ − 164 */
+ − 165 /* #define USE_FULL_ASSERT 1 */
+ − 166
+ − 167 /* ################## Ethernet peripheral configuration ##################### */
+ − 168
+ − 169 /* Section 1 : Ethernet peripheral configuration */
+ − 170
+ − 171 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 172 #define MAC_ADDR0 2U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 173 #define MAC_ADDR1 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 174 #define MAC_ADDR2 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 175 #define MAC_ADDR3 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 176 #define MAC_ADDR4 0U
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 177 #define MAC_ADDR5 0U
38
+ − 178
+ − 179 /* Definition of the Ethernet driver buffers size and count */
+ − 180 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+ − 181 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 182 #define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 183 #define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
38
+ − 184
+ − 185 /* Section 2: PHY configuration section */
+ − 186
+ − 187 /* DP83848 PHY Address*/
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 188 #define DP83848_PHY_ADDRESS 0x01U
38
+ − 189 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 190 #define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
38
+ − 191 /* PHY Configuration delay */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 192 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
38
+ − 193
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 194 #define PHY_READ_TO ((uint32_t)0x0000FFFFU)
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 195 #define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
38
+ − 196
+ − 197 /* Section 3: Common PHY Registers */
+ − 198
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 199 #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 200 #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
38
+ − 201
+ − 202 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+ − 203 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+ − 204 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+ − 205 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+ − 206 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+ − 207 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+ − 208 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+ − 209 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+ − 210 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+ − 211 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+ − 212
+ − 213 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+ − 214 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+ − 215 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+ − 216
+ − 217 /* Section 4: Extended PHY Registers */
+ − 218
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 219 #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 220 #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 221 #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
38
+ − 222
+ − 223 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+ − 224 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+ − 225 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+ − 226
+ − 227 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+ − 228 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+ − 229
+ − 230 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+ − 231 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+ − 232
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 233 /* ################## SPI peripheral configuration ########################## */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 234
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 235 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 236 * Activated: CRC code is present inside driver
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 237 * Deactivated: CRC code cleaned from driver
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 238 */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 239
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 240 /*#define USE_SPI_CRC 1U*/
38
+ − 241 /* Includes ------------------------------------------------------------------*/
+ − 242 /**
+ − 243 * @brief Include module's header file
+ − 244 */
+ − 245
+ − 246 #ifdef HAL_RCC_MODULE_ENABLED
+ − 247 #include "stm32f4xx_hal_rcc.h"
+ − 248 #endif /* HAL_RCC_MODULE_ENABLED */
+ − 249
+ − 250 #ifdef HAL_GPIO_MODULE_ENABLED
+ − 251 #include "stm32f4xx_hal_gpio.h"
+ − 252 #endif /* HAL_GPIO_MODULE_ENABLED */
+ − 253
+ − 254 #ifdef HAL_DMA_MODULE_ENABLED
+ − 255 #include "stm32f4xx_hal_dma.h"
+ − 256 #endif /* HAL_DMA_MODULE_ENABLED */
+ − 257
+ − 258 #ifdef HAL_CORTEX_MODULE_ENABLED
+ − 259 #include "stm32f4xx_hal_cortex.h"
+ − 260 #endif /* HAL_CORTEX_MODULE_ENABLED */
+ − 261
+ − 262 #ifdef HAL_ADC_MODULE_ENABLED
+ − 263 #include "stm32f4xx_hal_adc.h"
+ − 264 #endif /* HAL_ADC_MODULE_ENABLED */
+ − 265
+ − 266 #ifdef HAL_CAN_MODULE_ENABLED
+ − 267 #include "stm32f4xx_hal_can.h"
+ − 268 #endif /* HAL_CAN_MODULE_ENABLED */
+ − 269
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 270 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 271 #include "stm32f4xx_hal_can_legacy.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 272 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 273
38
+ − 274 #ifdef HAL_CRC_MODULE_ENABLED
+ − 275 #include "stm32f4xx_hal_crc.h"
+ − 276 #endif /* HAL_CRC_MODULE_ENABLED */
+ − 277
+ − 278 #ifdef HAL_CRYP_MODULE_ENABLED
+ − 279 #include "stm32f4xx_hal_cryp.h"
+ − 280 #endif /* HAL_CRYP_MODULE_ENABLED */
+ − 281
+ − 282 #ifdef HAL_DMA2D_MODULE_ENABLED
+ − 283 #include "stm32f4xx_hal_dma2d.h"
+ − 284 #endif /* HAL_DMA2D_MODULE_ENABLED */
+ − 285
+ − 286 #ifdef HAL_DAC_MODULE_ENABLED
+ − 287 #include "stm32f4xx_hal_dac.h"
+ − 288 #endif /* HAL_DAC_MODULE_ENABLED */
+ − 289
+ − 290 #ifdef HAL_DCMI_MODULE_ENABLED
+ − 291 #include "stm32f4xx_hal_dcmi.h"
+ − 292 #endif /* HAL_DCMI_MODULE_ENABLED */
+ − 293
+ − 294 #ifdef HAL_ETH_MODULE_ENABLED
+ − 295 #include "stm32f4xx_hal_eth.h"
+ − 296 #endif /* HAL_ETH_MODULE_ENABLED */
+ − 297
+ − 298 #ifdef HAL_FLASH_MODULE_ENABLED
+ − 299 #include "stm32f4xx_hal_flash.h"
+ − 300 #endif /* HAL_FLASH_MODULE_ENABLED */
+ − 301
+ − 302 #ifdef HAL_SRAM_MODULE_ENABLED
+ − 303 #include "stm32f4xx_hal_sram.h"
+ − 304 #endif /* HAL_SRAM_MODULE_ENABLED */
+ − 305
+ − 306 #ifdef HAL_NOR_MODULE_ENABLED
+ − 307 #include "stm32f4xx_hal_nor.h"
+ − 308 #endif /* HAL_NOR_MODULE_ENABLED */
+ − 309
+ − 310 #ifdef HAL_NAND_MODULE_ENABLED
+ − 311 #include "stm32f4xx_hal_nand.h"
+ − 312 #endif /* HAL_NAND_MODULE_ENABLED */
+ − 313
+ − 314 #ifdef HAL_PCCARD_MODULE_ENABLED
+ − 315 #include "stm32f4xx_hal_pccard.h"
+ − 316 #endif /* HAL_PCCARD_MODULE_ENABLED */
+ − 317
+ − 318 #ifdef HAL_SDRAM_MODULE_ENABLED
+ − 319 #include "stm32f4xx_hal_sdram.h"
+ − 320 #endif /* HAL_SDRAM_MODULE_ENABLED */
+ − 321
+ − 322 #ifdef HAL_HASH_MODULE_ENABLED
+ − 323 #include "stm32f4xx_hal_hash.h"
+ − 324 #endif /* HAL_HASH_MODULE_ENABLED */
+ − 325
+ − 326 #ifdef HAL_I2C_MODULE_ENABLED
+ − 327 #include "stm32f4xx_hal_i2c.h"
+ − 328 #endif /* HAL_I2C_MODULE_ENABLED */
+ − 329
+ − 330 #ifdef HAL_I2S_MODULE_ENABLED
+ − 331 #include "stm32f4xx_hal_i2s.h"
+ − 332 #endif /* HAL_I2S_MODULE_ENABLED */
+ − 333
+ − 334 #ifdef HAL_IWDG_MODULE_ENABLED
+ − 335 #include "stm32f4xx_hal_iwdg.h"
+ − 336 #endif /* HAL_IWDG_MODULE_ENABLED */
+ − 337
+ − 338 #ifdef HAL_LTDC_MODULE_ENABLED
+ − 339 #include "stm32f4xx_hal_ltdc.h"
+ − 340 #endif /* HAL_LTDC_MODULE_ENABLED */
+ − 341
+ − 342 #ifdef HAL_PWR_MODULE_ENABLED
+ − 343 #include "stm32f4xx_hal_pwr.h"
+ − 344 #endif /* HAL_PWR_MODULE_ENABLED */
+ − 345
+ − 346 #ifdef HAL_RNG_MODULE_ENABLED
+ − 347 #include "stm32f4xx_hal_rng.h"
+ − 348 #endif /* HAL_RNG_MODULE_ENABLED */
+ − 349
+ − 350 #ifdef HAL_RTC_MODULE_ENABLED
+ − 351 #include "stm32f4xx_hal_rtc.h"
+ − 352 #endif /* HAL_RTC_MODULE_ENABLED */
+ − 353
+ − 354 #ifdef HAL_SAI_MODULE_ENABLED
+ − 355 #include "stm32f4xx_hal_sai.h"
+ − 356 #endif /* HAL_SAI_MODULE_ENABLED */
+ − 357
+ − 358 #ifdef HAL_SD_MODULE_ENABLED
+ − 359 #include "stm32f4xx_hal_sd.h"
+ − 360 #endif /* HAL_SD_MODULE_ENABLED */
+ − 361
+ − 362 #ifdef HAL_SPI_MODULE_ENABLED
+ − 363 #include "stm32f4xx_hal_spi.h"
+ − 364 #endif /* HAL_SPI_MODULE_ENABLED */
+ − 365
+ − 366 #ifdef HAL_TIM_MODULE_ENABLED
+ − 367 #include "stm32f4xx_hal_tim.h"
+ − 368 #endif /* HAL_TIM_MODULE_ENABLED */
+ − 369
+ − 370 #ifdef HAL_UART_MODULE_ENABLED
+ − 371 #include "stm32f4xx_hal_uart.h"
+ − 372 #endif /* HAL_UART_MODULE_ENABLED */
+ − 373
+ − 374 #ifdef HAL_USART_MODULE_ENABLED
+ − 375 #include "stm32f4xx_hal_usart.h"
+ − 376 #endif /* HAL_USART_MODULE_ENABLED */
+ − 377
+ − 378 #ifdef HAL_IRDA_MODULE_ENABLED
+ − 379 #include "stm32f4xx_hal_irda.h"
+ − 380 #endif /* HAL_IRDA_MODULE_ENABLED */
+ − 381
+ − 382 #ifdef HAL_SMARTCARD_MODULE_ENABLED
+ − 383 #include "stm32f4xx_hal_smartcard.h"
+ − 384 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
+ − 385
+ − 386 #ifdef HAL_WWDG_MODULE_ENABLED
+ − 387 #include "stm32f4xx_hal_wwdg.h"
+ − 388 #endif /* HAL_WWDG_MODULE_ENABLED */
+ − 389
+ − 390 #ifdef HAL_PCD_MODULE_ENABLED
+ − 391 #include "stm32f4xx_hal_pcd.h"
+ − 392 #endif /* HAL_PCD_MODULE_ENABLED */
+ − 393
+ − 394 #ifdef HAL_HCD_MODULE_ENABLED
+ − 395 #include "stm32f4xx_hal_hcd.h"
+ − 396 #endif /* HAL_HCD_MODULE_ENABLED */
+ − 397
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 398 #ifdef HAL_DSI_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 399 #include "stm32f4xx_hal_dsi.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 400 #endif /* HAL_DSI_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 401
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 402 #ifdef HAL_QSPI_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 403 #include "stm32f4xx_hal_qspi.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 404 #endif /* HAL_QSPI_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 405
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 406 #ifdef HAL_CEC_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 407 #include "stm32f4xx_hal_cec.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 408 #endif /* HAL_CEC_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 409
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 410 #ifdef HAL_FMPI2C_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 411 #include "stm32f4xx_hal_fmpi2c.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 412 #endif /* HAL_FMPI2C_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 413
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 414 #ifdef HAL_SPDIFRX_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 415 #include "stm32f4xx_hal_spdifrx.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 416 #endif /* HAL_SPDIFRX_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 417
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 418 #ifdef HAL_DFSDM_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 419 #include "stm32f4xx_hal_dfsdm.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 420 #endif /* HAL_DFSDM_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 421
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 422 #ifdef HAL_LPTIM_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 423 #include "stm32f4xx_hal_lptim.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 424 #endif /* HAL_LPTIM_MODULE_ENABLED */
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 425
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 426 #ifdef HAL_MMC_MODULE_ENABLED
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 427 #include "stm32f4xx_hal_mmc.h"
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 428 #endif /* HAL_MMC_MODULE_ENABLED */
38
+ − 429 /* Exported macro ------------------------------------------------------------*/
+ − 430 #ifdef USE_FULL_ASSERT
+ − 431 /**
+ − 432 * @brief The assert_param macro is used for function's parameters check.
+ − 433 * @param expr: If expr is false, it calls assert_failed function
+ − 434 * which reports the name of the source file and the source
+ − 435 * line number of the call that failed.
+ − 436 * If expr is true, it returns no value.
+ − 437 * @retval None
+ − 438 */
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 439 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
38
+ − 440 /* Exported functions ------------------------------------------------------- */
+ − 441 void assert_failed(uint8_t* file, uint32_t line);
+ − 442 #else
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
diff
changeset
+ − 443 #define assert_param(expr) ((void)0U)
38
+ − 444 #endif /* USE_FULL_ASSERT */
+ − 445
+ − 446
+ − 447 #ifdef __cplusplus
+ − 448 }
+ − 449 #endif
+ − 450
+ − 451 #endif /* STM32F4xx_HAL_CONF_H */
+ − 452
+ − 453
+ − 454 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/