annotate wiki/Detailed CPU1-Upper Project.md @ 747:df0d43da1614
Added pressure compensation to CO2 detection:
A pressure compensation is needed if the ExplorIR shall be used under extended pressure conditions. The procedure recommended by the application note has been integrated. To keep things simple the focus of the CO2 measurement is not the precision, as it is needed for the decompression calculation, but the indication of a critical increase of CO2 in the breathing loop. That's why only a lookup table with 1000ppm steps has been implemented instead of calculating the polynom for every measurement.
| author |
Ideenmodellierer |
| date |
Sun, 05 Mar 2023 22:06:47 +0100 |
| parents |
5f11787b4f42 |
| children |
|
| rev |
line source |
|
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
|
2
|
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
|
6
|
|
|
7 ## Make a specific project ##
|
|
|
8
|
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
|
10
|
|
|
11 **
|
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
|
13 **
|
