Mercurial > public > ostc4
annotate Discovery/Src/tMenuEditHardware.c @ 859:d32901746950 Evo_2_23
Improvment battery charger visualization:
In the previous version the green flash (charge complete) was shown even battery had not reached 100% charge. Root cause was that the pin signaling the end of charge could be raised for other reasons then a full battery. The new version will show the green flash only in case the battery is rated as full.
In addition the graph visualization has been updated to continously progress. In the previous version it only progressed in case the charge value changed. Especially at charging start the charger is doing some battery evaluation which does not increase the charge state. In such a case the graph seemed to be frozen.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 07 May 2024 21:20:33 +0200 |
| parents | 48b6a3b1f3f8 |
| children | 940f8e132638 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tMenuEditHardware.c | |
| 5 /// \brief BUTTONS | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 15-Sept-2016 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "tMenuEditHardware.h" | |
| 783 | 31 #include "tMenuEdit.h" |
| 38 | 32 |
| 33 #include "externCPU2bootloader.h" | |
| 34 #include "gfx_fonts.h" | |
| 35 #include "ostc.h" | |
| 36 #include "tCCR.h" | |
| 37 #include "tMenuEdit.h" | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
115
diff
changeset
|
38 #include "tHome.h" |
|
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
115
diff
changeset
|
39 #include "tInfo.h" |
|
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
115
diff
changeset
|
40 #include "tInfoLog.h" |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
41 #include "tInfoSensor.h" |
|
394
717f335cc5c9
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
314
diff
changeset
|
42 #include "tComm.h" |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
43 #include "data_exchange_main.h" |
| 38 | 44 |
| 748 | 45 |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
115
diff
changeset
|
46 extern void tM_build_pages(void); |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
47 |
| 38 | 48 /* Private function prototypes -----------------------------------------------*/ |
| 49 void openEdit_Bluetooth(void); | |
| 50 void openEdit_Compass(void); | |
| 51 void openEdit_O2Sensors(void); | |
| 52 void openEdit_Brightness(void); | |
| 53 //void openEdit_Luftintegration(void); | |
| 54 void openEdit_ButtonSens(void); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
55 void openEdit_FlipDisplay(void); |
| 38 | 56 |
| 57 /* Announced function prototypes -----------------------------------------------*/ | |
| 58 uint8_t OnAction_Compass (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 59 uint8_t OnAction_Bearing (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 60 uint8_t OnAction_BearingClear (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
61 uint8_t OnAction_InertiaLevel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 62 //uint8_t OnAction_ExitHardw (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 63 uint8_t OnAction_Sensor1 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 64 uint8_t OnAction_Sensor2 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 65 uint8_t OnAction_Sensor3 (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
66 uint8_t OnAction_O2_Calibrate (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
67 //uint8_t OnAction_O2_Source (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
68 uint8_t OnAction_Sensor_Info (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
69 uint8_t OnAction_Sensor_Detect (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 70 uint8_t OnAction_Button (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 71 uint8_t OnAction_ButtonBalance (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
72 uint8_t OnAction_ButtonLock (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 605 | 73 // not required uint8_t OnAction_Bluetooth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 74 |
| 75 /* Exported functions --------------------------------------------------------*/ | |
| 76 | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
77 |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
78 #define O2_CALIB_FRACTION_AIR (0.209F) |
| 605 | 79 #define O2_CALIB_FRACTION_O2 (0.98F) |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
80 |
| 584 | 81 static uint8_t O2_calib_gas = 21; |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
82 |
| 38 | 83 void openEdit_Hardware(uint8_t line) |
| 84 { | |
| 85 set_globalState_Menu_Line(line); | |
| 86 | |
| 87 switch(line) | |
| 88 { | |
| 89 case 1: | |
| 90 default: | |
| 91 openEdit_Bluetooth(); | |
| 92 break; | |
| 93 case 2: | |
|
708
7e3bf2c0cd40
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
703
diff
changeset
|
94 resetMenuEdit(CLUT_MenuPageHardware); |
| 38 | 95 openEdit_Compass(); |
| 96 break; | |
| 97 case 3: | |
| 98 openEdit_O2Sensors(); | |
| 99 break; | |
| 100 case 4: | |
| 101 openEdit_Brightness(); | |
| 102 break; | |
| 103 case 5: | |
|
708
7e3bf2c0cd40
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
703
diff
changeset
|
104 resetMenuEdit(CLUT_MenuPageHardware); |
| 38 | 105 openEdit_ButtonSens(); |
| 106 break; | |
| 107 case 6: | |
| 138 | 108 openEdit_FlipDisplay(); |
| 38 | 109 break; |
| 110 } | |
| 111 } | |
| 112 | |
| 113 /* Private functions ---------------------------------------------------------*/ | |
| 114 void openEdit_Bluetooth(void) | |
| 115 { | |
| 116 /* does not work like this resetEnterPressedToStateBeforeButtonAction(); */ | |
| 117 | |
| 118 SSettings *pSettings = settingsGetPointer(); | |
| 119 | |
| 120 if(pSettings->bluetoothActive == 0) | |
| 121 { | |
| 122 pSettings->bluetoothActive = 1; | |
| 123 MX_Bluetooth_PowerOn(); | |
|
394
717f335cc5c9
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
314
diff
changeset
|
124 tComm_StartBlueModConfig(); |
| 38 | 125 } |
| 126 else | |
| 127 { | |
| 128 pSettings->bluetoothActive = 0; | |
| 129 MX_Bluetooth_PowerOff(); | |
| 130 } | |
| 131 exitMenuEdit_to_Menu_with_Menu_Update_do_not_write_settings_for_this_only(); | |
| 132 } | |
| 133 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
134 void openEdit_FlipDisplay(void) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
135 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
136 /* does not work like this resetEnterPressedToStateBeforeButtonAction(); */ |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
137 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
138 SSettings *pSettings = settingsGetPointer(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
139 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
140 if(pSettings->FlipDisplay == 0) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
141 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
142 pSettings->FlipDisplay = 1; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
143 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
144 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
145 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
146 pSettings->FlipDisplay = 0; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
147 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
148 /* reinit all views */ |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
149 tHome_init(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
150 tI_init(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
151 tM_init(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
152 tMenuEdit_init(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
153 tInfoLog_init(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
154 tM_build_pages(); |
| 314 | 155 GFX_build_logo_frame(); |
| 156 GFX_build_hw_background_frame(); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
157 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
158 exitEditWithUpdate(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
159 exitMenuEdit_to_Home(); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
160 } |
| 38 | 161 |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
162 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
163 static uint8_t togglePlusMinus(uint8_t input) |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
164 { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
165 if (input == '+') { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
166 return '-'; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
167 } else { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
168 return '+'; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
169 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
170 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
171 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
172 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
173 static uint8_t OnAction_CompassDeclination(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
174 { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
175 SSettings *settings = settingsGetPointer(); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
176 uint8_t digitContentNew; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
177 switch (action) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
178 case ACTION_BUTTON_ENTER: |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
179 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
180 return digitContent; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
181 case ACTION_BUTTON_ENTER_FINAL: |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
182 { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
183 int32_t compassDeclinationDeg; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
184 evaluateNewString(editId, (uint32_t *)&compassDeclinationDeg, NULL, NULL, NULL); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
185 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
186 if (compassDeclinationDeg > 99) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
187 compassDeclinationDeg = 99; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
188 } else if (compassDeclinationDeg < -99) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
189 compassDeclinationDeg = -99; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
190 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
191 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
192 settings->compassDeclinationDeg = compassDeclinationDeg; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
193 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
194 tMenuEdit_newInput(editId, ((input_u)compassDeclinationDeg).uint32, 0, 0, 0); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
195 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
196 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
197 break; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
198 case ACTION_BUTTON_NEXT: |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
199 if (digitNumber == 0) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
200 digitContentNew = togglePlusMinus(digitContent); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
201 } else { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
202 digitContentNew = digitContent + 1; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
203 if (digitContentNew > '9') { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
204 digitContentNew = '0'; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
205 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
206 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
207 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
208 return digitContentNew; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
209 case ACTION_BUTTON_BACK: |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
210 if (digitNumber == 0) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
211 digitContentNew = togglePlusMinus(digitContent); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
212 } else { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
213 digitContentNew = digitContent - 1; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
214 if (digitContentNew < '0') { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
215 digitContentNew = '9'; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
216 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
217 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
218 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
219 return digitContentNew; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
220 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
221 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
222 return UNSPECIFIC_RETURN; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
223 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
224 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
225 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
226 static void showCompassDeclination(SSettings *settings, bool isRefresh) |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
227 { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
228 char text[16]; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
229 snprintf(text, 16, "%c%c:", TXT_2BYTE, TXT2BYTE_CompassDeclination); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
230 write_label_var(30, 800, ME_Y_LINE6, &FontT48, text); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
231 if (isRefresh) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
232 tMenuEdit_refresh_field(StMHARD2_Compass_Declination); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
233 } else { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
234 write_field_sdigit(StMHARD2_Compass_Declination, 500, 800, ME_Y_LINE6, &FontT48, "\034###`", settings->compassDeclinationDeg, 0, 0, 0); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
235 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
236 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
237 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
238 |
| 38 | 239 void refresh_CompassEdit(void) |
| 240 { | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
241 SSettings *settings = settingsGetPointer(); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
242 |
| 38 | 243 uint16_t heading; |
| 244 char text[32]; | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
245 uint8_t textIndex = 0; |
| 38 | 246 |
| 247 text[0] = '\001'; | |
| 248 text[1] = TXT_2BYTE; | |
| 249 text[2] = TXT2BYTE_Compass; | |
| 250 text[3] = 0; | |
| 251 write_topline(text); | |
| 252 | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
253 if(settings->compassInertia) |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
254 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
255 heading = (uint16_t)compass_getCompensated(); |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
256 } |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
257 else |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
258 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
259 heading = (uint16_t)stateUsed->lifeData.compass_heading; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
260 } |
| 38 | 261 snprintf(text,32,"\001%03i`",heading); |
| 262 write_label_var( 0, 800, ME_Y_LINE1, &FontT54, text); | |
| 263 | |
| 264 tMenuEdit_refresh_field(StMHARD2_Compass_SetCourse); | |
| 265 tMenuEdit_refresh_field(StMHARD2_Compass_Calibrate); | |
| 266 tMenuEdit_refresh_field(StMHARD2_Compass_ResetCourse); | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
267 text[textIndex++] = TXT_2BYTE; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
268 text[textIndex++] = TXT2BYTE_CompassInertia; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
269 text[textIndex++] = ':'; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
270 text[textIndex++] = ' '; |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
271 text[textIndex++] = '0' + settings->compassInertia; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
272 |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
273 write_label_var(30, 800, ME_Y_LINE5, &FontT48, text); |
| 38 | 274 |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
275 showCompassDeclination(settings, true); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
276 |
| 38 | 277 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); |
| 278 } | |
| 279 | |
| 280 | |
| 281 void openEdit_Compass(void) | |
| 282 { | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
283 SSettings *settings = settingsGetPointer(); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
284 |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
285 char text[10]; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
286 uint8_t textIndex = 0; |
| 38 | 287 |
| 854 | 288 |
| 289 set_globalState(StMHARD2_Compass); | |
| 290 resetMenuEdit(CLUT_MenuPageHardware); | |
| 291 | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
292 text[textIndex++] = '\001'; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
293 text[textIndex++] = TXT_2BYTE; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
294 text[textIndex++] = TXT2BYTE_Compass; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
295 text[textIndex++] = 0; |
| 38 | 296 write_topline(text); |
| 297 | |
| 298 text[0] = TXT_2BYTE; | |
| 299 text[2] = 0; | |
| 300 | |
| 301 text[1] = TXT2BYTE_SetBearing; | |
| 302 write_field_button(StMHARD2_Compass_SetCourse, 30, 800, ME_Y_LINE2, &FontT48, text); | |
| 303 | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
304 text[1] = TXT2BYTE_ResetBearing; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
305 write_field_button(StMHARD2_Compass_ResetCourse, 30, 800, ME_Y_LINE3, &FontT48, text); |
| 38 | 306 |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
307 text[1] = TXT2BYTE_CompassCalib; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
308 write_field_button(StMHARD2_Compass_Calibrate, 30, 800, ME_Y_LINE4, &FontT48, text); |
| 38 | 309 |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
310 text[1] = TXT2BYTE_CompassInertia; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
311 textIndex = 2; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
312 text[textIndex++] = ':'; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
313 text[textIndex++] = ' '; |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
314 text[textIndex++] = '0' + settings->compassInertia; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
315 text[textIndex++] = 0; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
316 |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
317 write_field_button(StMHARD2_Compass_Inertia, 30, 800, ME_Y_LINE5, &FontT48, text); |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
318 |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
319 showCompassDeclination(settings, false); |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
320 |
| 38 | 321 setEvent(StMHARD2_Compass_SetCourse, (uint32_t)OnAction_Bearing); |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
322 setEvent(StMHARD2_Compass_ResetCourse, (uint32_t)OnAction_BearingClear); |
| 38 | 323 setEvent(StMHARD2_Compass_Calibrate, (uint32_t)OnAction_Compass); |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
324 setEvent(StMHARD2_Compass_Inertia, (uint32_t)OnAction_InertiaLevel); |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
754
diff
changeset
|
325 setEvent(StMHARD2_Compass_Declination, (uint32_t)OnAction_CompassDeclination); |
| 38 | 326 |
| 854 | 327 tMenuEdit_select(StMHARD2_Compass_SetCourse); |
| 328 | |
| 38 | 329 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); |
| 330 } | |
| 331 | |
| 332 | |
| 333 uint8_t OnAction_Compass (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 334 { | |
| 335 calibrateCompass(); | |
| 336 return EXIT_TO_INFO_COMPASS; | |
| 337 } | |
| 338 | |
| 339 | |
| 340 uint8_t OnAction_Bearing (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 341 { | |
| 709 | 342 if((int16_t)stateUsed->lifeData.compass_heading != -1) |
| 343 { | |
| 344 settingsGetPointer()->compassBearing = (int16_t)stateUsed->lifeData.compass_heading; | |
| 345 } | |
| 346 else | |
| 347 { | |
| 348 settingsGetPointer()->compassBearing = 0; | |
| 349 } | |
| 350 | |
| 38 | 351 if(settingsGetPointer()->compassBearing == 0) |
| 352 settingsGetPointer()->compassBearing = 360; | |
| 353 return UPDATE_AND_EXIT_TO_MENU; | |
| 354 } | |
| 355 | |
| 356 | |
| 357 uint8_t OnAction_BearingClear (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 358 { | |
| 359 settingsGetPointer()->compassBearing = 0; | |
| 360 return UPDATE_AND_EXIT_TO_MENU; | |
| 361 } | |
| 362 | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
363 |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
364 uint8_t OnAction_InertiaLevel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
365 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
366 uint8_t newLevel = 0; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
367 |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
368 newLevel = settingsGetPointer()->compassInertia + 1; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
369 if(newLevel > MAX_COMPASS_COMP) |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
370 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
371 newLevel = 0; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
372 } |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
373 settingsGetPointer()->compassInertia = newLevel; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
374 return UPDATE_DIVESETTINGS; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
375 } |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
525
diff
changeset
|
376 |
| 38 | 377 /* |
| 378 uint8_t OnAction_ExitHardw (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 379 { | |
| 380 return EXIT_TO_MENU; | |
| 381 } | |
| 382 */ | |
| 383 | |
| 384 void refresh_O2Sensors(void) | |
| 385 { | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
386 char strSensorId[20]; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
387 char strSensorValue[20]; |
| 38 | 388 uint16_t y_line; |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
389 uint8_t index = 0; |
| 38 | 390 |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
391 const SDiveState *pStateReal = stateRealGetPointer(); |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
392 SSettings *pSettings = settingsGetPointer(); |
| 38 | 393 |
| 797 | 394 if(memcmp(pSettings->ext_sensor_map, pStateReal->lifeData.extIf_sensor_map, EXT_INTERFACE_SENSOR_CNT) != 0) |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
395 { |
| 797 | 396 memcpy(pSettings->ext_sensor_map, pStateReal->lifeData.extIf_sensor_map, EXT_INTERFACE_SENSOR_CNT); |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
397 pSettings->ppo2sensors_deactivated = 0x0; /* deactivation will be done by openEditO2Sensor if need */ |
| 827 | 398 pSettings->co2_sensor_active = 0; |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
399 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; |
| 827 | 400 for(index = 0; index < EXT_INTERFACE_SENSOR_CNT - 1; index++) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
401 { |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
402 switch(pSettings->ext_sensor_map[index]) |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
403 { |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
404 case SENSOR_OPTIC: pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
405 break; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
406 case SENSOR_ANALOG: if(pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_DIGITAL) |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
407 { |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
408 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANADIG; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
409 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
410 if(pSettings->ppo2sensors_source != O2_SENSOR_SOURCE_ANADIG) |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
411 { |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
412 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANALOG; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
413 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
414 break; |
| 797 | 415 case SENSOR_DIGO2M: if(pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
416 { |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
417 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_ANADIG; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
418 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
419 if(pSettings->ppo2sensors_source != O2_SENSOR_SOURCE_ANADIG) |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
420 { |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
421 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_DIGITAL; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
422 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
423 break; |
| 827 | 424 case SENSOR_CO2: |
| 425 case SENSOR_CO2M: pSettings->co2_sensor_active = 1; | |
| 426 break; | |
| 746 | 427 #ifdef ENABLE_SENTINEL_MODE |
|
842
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
827
diff
changeset
|
428 case SENSOR_SENTINEL: |
|
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
827
diff
changeset
|
429 case SENSOR_SENTINELM: pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_SENTINEL; |
| 745 | 430 break; |
| 746 | 431 #endif |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
432 default: |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
433 break; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
434 } |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
435 } |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
436 openEdit_O2Sensors(); |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
437 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
438 |
| 783 | 439 strSensorId[0] = '\001'; |
| 440 strSensorId[1] = TXT_o2Sensors; | |
| 441 strSensorId[2] = 0; | |
| 442 write_topline(strSensorId); | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
443 |
| 783 | 444 strSensorId[0] = TXT_2BYTE; |
| 445 strSensorId[1] = TXT2BYTE_Sensor; | |
| 446 strSensorId[2] = ' '; | |
| 447 strSensorId[3] = TXT_2BYTE; | |
| 448 strSensorId[4] = 'X'; | |
| 449 strSensorId[5] = '1'; | |
| 450 strSensorId[6] = 0; | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
451 |
| 783 | 452 for(index = 0; index < 3; index++) |
| 453 { | |
| 799 | 454 strSensorId[3] = TXT_2BYTE; |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
455 strSensorId[4] = 'X'; |
| 783 | 456 strSensorId[5] = '1' + index; |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
457 |
| 783 | 458 switch(pSettings->ext_sensor_map[index]) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
459 { |
| 748 | 460 case SENSOR_SEARCH: strSensorId[1] = TXT2BYTE_SensorDetect; |
| 461 strSensorId[2] = 0; | |
| 462 strSensorId[4] = 0; | |
| 745 | 463 break; |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
464 case SENSOR_OPTIC: strSensorId[4] = TXT2BYTE_O2IFOptic; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
465 break; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
466 case SENSOR_ANALOG: strSensorId[4] = TXT2BYTE_O2IFAnalog; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
467 break; |
| 797 | 468 case SENSOR_DIGO2: |
| 469 case SENSOR_DIGO2M: strSensorId[4] = TXT2BYTE_O2IFDigital; | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
470 break; |
| 799 | 471 case SENSOR_CO2: |
| 472 case SENSOR_CO2M: strSensorId[3] = 'C'; | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
473 strSensorId[4] = 'O'; |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
474 break; |
|
842
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
827
diff
changeset
|
475 case SENSOR_SENTINEL: |
|
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
827
diff
changeset
|
476 case SENSOR_SENTINELM: strSensorId[3] = 'S'; |
| 745 | 477 strSensorId[4] = 'e'; |
| 478 break; | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
479 default: |
| 748 | 480 strSensorId[5] = 0; |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
481 break; |
| 783 | 482 } |
| 483 if(strSensorId[4] != 'X') | |
| 484 { | |
| 485 write_label_var( 96, 340, ME_Y_LINE1 + (index * ME_Y_LINE_STEP), &FontT48, strSensorId); | |
| 486 } | |
| 487 strSensorValue[0] = 0; | |
| 488 if((pSettings->ext_sensor_map[index] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[index] < SENSOR_TYPE_O2_END)) | |
| 489 { | |
| 490 snprintf(strSensorValue, 20,"%01.2f, %01.1f mV", pStateReal->lifeData.ppO2Sensor_bar[index], pStateReal->lifeData.sensorVoltage_mV[index]); | |
| 491 } | |
| 799 | 492 else if(pSettings->ext_sensor_map[index] == SENSOR_CO2M) |
| 783 | 493 { |
| 494 snprintf(strSensorValue, 20,"%ld ppm", pStateReal->lifeData.CO2_data.CO2_ppm); | |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
495 } |
| 783 | 496 y_line = ME_Y_LINE1 + (index * ME_Y_LINE_STEP); |
| 497 if(strSensorValue[0] != 0) | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
498 { |
| 783 | 499 write_label_var( 480, 800, y_line, &FontT48, strSensorValue); |
| 500 } | |
| 501 } | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
502 |
| 783 | 503 if(pSettings->ext_sensor_map[0] == SENSOR_OPTIC) |
| 504 { | |
| 505 strSensorId[0] = TXT_2BYTE; | |
| 506 strSensorId[1] = TXT2BYTE_HUDbattery; | |
| 507 strSensorId[2] = 0; | |
| 508 write_label_var( 30, 340, ME_Y_LINE4, &FontT48, strSensorId); | |
| 509 | |
| 510 snprintf(strSensorId, 20,"%01.3fV", get_HUD_battery_voltage_V()); | |
| 511 write_label_var( 480, 800, ME_Y_LINE4, &FontT48, strSensorId); | |
| 512 } | |
| 513 else | |
| 514 { | |
| 515 if((pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) | |
|
754
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
516 #ifdef ENABLE_SENTINEL_MODE |
| 746 | 517 || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) |
| 518 #endif | |
| 519 ) | |
| 783 | 520 { |
| 521 strSensorId[0] = TXT_2BYTE; | |
| 522 strSensorId[1] = TXT2BYTE_O2Calib; | |
| 523 strSensorId[2] = 0; | |
| 524 write_label_var( 30, 340, ME_Y_LINE4, &FontT48, strSensorId); | |
| 525 snprintf(strSensorId, 20,"%d%%", O2_calib_gas); | |
| 526 write_label_var( 480, 800, ME_Y_LINE4, &FontT48, strSensorId); | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
527 } |
| 783 | 528 } |
| 529 if(DataEX_external_ADC_Present()) | |
| 530 { | |
| 531 strSensorId[0] = TXT_2BYTE; | |
| 532 strSensorId[1] = TXT2BYTE_SensorDetect; | |
| 533 strSensorId[2] = 0; | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
534 |
| 783 | 535 write_label_var( 30, 340, ME_Y_LINE6, &FontT48, strSensorId); |
| 536 } | |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
730
diff
changeset
|
537 |
| 827 | 538 if((pSettings->ext_sensor_map[0] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[0] < SENSOR_MUX)) |
| 783 | 539 { |
| 540 tMenuEdit_refresh_field(StMHARD3_O2_Sensor1); | |
| 541 } | |
| 827 | 542 if((pSettings->ext_sensor_map[1] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[1] < SENSOR_MUX)) |
| 783 | 543 { |
| 544 tMenuEdit_refresh_field(StMHARD3_O2_Sensor2); | |
| 545 } | |
| 827 | 546 if((pSettings->ext_sensor_map[2] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[2] < SENSOR_MUX)) |
| 783 | 547 { |
| 548 tMenuEdit_refresh_field(StMHARD3_O2_Sensor3); | |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
549 } |
| 38 | 550 |
| 584 | 551 if(get_globalState() == StMHARD3_O2_Calibrate) |
| 552 { | |
| 553 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_O2Calib,TXT2BYTE_ButtonPlus); | |
| 554 } | |
| 555 else | |
| 556 { | |
| 557 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 558 } | |
| 38 | 559 } |
| 560 | |
| 561 | |
| 562 void openEdit_O2Sensors(void) | |
| 563 { | |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
564 SSettings *pSettings = settingsGetPointer(); |
| 38 | 565 uint8_t sensorActive[3]; |
| 783 | 566 uint8_t index = 0; |
| 746 | 567 char text[3]; |
| 38 | 568 |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
569 set_globalState(StMHARD3_Sensors); |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
570 resetMenuEdit(CLUT_MenuPageHardware); |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
571 |
| 783 | 572 for(index = 0; index < 3; index++ ) |
| 573 { | |
| 574 if(pSettings->ppo2sensors_deactivated & (0x01 << index)) | |
| 575 { | |
| 576 sensorActive[index] = 0; | |
| 577 } | |
| 578 else | |
| 579 { | |
| 580 sensorActive[index] = 1; | |
| 581 } | |
| 582 } | |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
583 |
| 827 | 584 if(((pSettings->ext_sensor_map[0] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[0] >= SENSOR_MUX))) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
585 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
586 pSettings->ppo2sensors_deactivated |= 1; |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
587 } |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
588 else |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
589 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
590 write_field_on_off(StMHARD3_O2_Sensor1, 30, 95, ME_Y_LINE1, &FontT48, "", sensorActive[0]); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
591 } |
| 827 | 592 if(((pSettings->ext_sensor_map[1] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[1] >= SENSOR_MUX))) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
593 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
594 pSettings->ppo2sensors_deactivated |= 2; |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
595 } |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
596 else |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
597 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
598 write_field_on_off(StMHARD3_O2_Sensor2, 30, 95, ME_Y_LINE2, &FontT48, "", sensorActive[1]); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
599 } |
| 827 | 600 if(((pSettings->ext_sensor_map[2] < SENSOR_OPTIC) || (pSettings->ext_sensor_map[2] >= SENSOR_MUX))) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
601 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
602 pSettings->ppo2sensors_deactivated |= 4; |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
603 } |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
604 else |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
605 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
606 write_field_on_off(StMHARD3_O2_Sensor3, 30, 95, ME_Y_LINE3, &FontT48, "", sensorActive[2]); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
607 } |
|
814
26ae9e8f24fd
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Ideenmodellierer
parents:
799
diff
changeset
|
608 |
|
26ae9e8f24fd
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Ideenmodellierer
parents:
799
diff
changeset
|
609 stateRealGetPointerWrite()->diveSettings.ppo2sensors_deactivated = pSettings->ppo2sensors_deactivated; |
|
26ae9e8f24fd
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Ideenmodellierer
parents:
799
diff
changeset
|
610 |
| 38 | 611 if(settingsGetPointer()->ppo2sensors_deactivated & 1) |
| 612 sensorActive[0] = 0; | |
| 613 if(settingsGetPointer()->ppo2sensors_deactivated & 2) | |
| 614 sensorActive[1] = 0; | |
| 615 if(settingsGetPointer()->ppo2sensors_deactivated & 4) | |
| 616 sensorActive[2] = 0; | |
| 617 | |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
618 if((pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) |
| 689 | 619 #ifdef ENABLE_SENTINEL_MODE |
| 620 || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) | |
| 621 #endif | |
| 622 ) | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
623 { |
| 584 | 624 write_label_fix( 30, 800, ME_Y_LINE4, &FontT48, TXT2BYTE_O2Calib); |
| 625 write_label_var( 400, 800, ME_Y_LINE4, &FontT48, "\016\016 %\017"); | |
| 626 | |
|
673
d7c5d592076b
Show 98% in case of Oxygen as the calibrating gas
heinrichsweikamp
parents:
605
diff
changeset
|
627 write_field_toggle(StMHARD3_O2_Calibrate, 400, 800, ME_Y_LINE4, &FontT48, "", 21, 98); |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
628 } |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
629 |
|
754
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
630 if(DataEX_external_ADC_Present()) |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
631 { |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
632 text[0] = TXT_2BYTE; |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
633 text[1] = TXT2BYTE_SensorDetect; |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
634 text[2] = 0; |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
635 |
|
754
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
636 write_label_var( 30, 340, ME_Y_LINE6, &FontT48, text); |
| 745 | 637 |
|
754
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
638 write_field_button(StMHARD3_Sensor_Detect, 30, 800, ME_Y_LINE6, &FontT48, text); |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
639 } |
| 745 | 640 |
| 827 | 641 if((pSettings->ext_sensor_map[0] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[0] < SENSOR_MUX)) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
642 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
643 setEvent(StMHARD3_O2_Sensor1, (uint32_t)OnAction_Sensor1); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
644 } |
| 827 | 645 if((pSettings->ext_sensor_map[1] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[1] < SENSOR_MUX)) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
646 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
647 setEvent(StMHARD3_O2_Sensor2, (uint32_t)OnAction_Sensor2); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
648 } |
| 827 | 649 if((pSettings->ext_sensor_map[2] >= SENSOR_OPTIC) && (pSettings->ext_sensor_map[2] < SENSOR_MUX)) |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
650 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
651 setEvent(StMHARD3_O2_Sensor3, (uint32_t)OnAction_Sensor3); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
652 } |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
653 |
|
703
2f457024049b
Added selection of digital o2 sensor source to HW menu:
Ideenmodellierer
parents:
689
diff
changeset
|
654 if((settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_ANALOG) || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG) |
| 689 | 655 #ifdef ENABLE_SENTINEL_MODE |
| 656 || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_SENTINEL) | |
| 657 #endif | |
| 658 ) | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
659 { |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
660 setEvent(StMHARD3_O2_Calibrate, (uint32_t)OnAction_O2_Calibrate); |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
661 } |
|
708
7e3bf2c0cd40
Menu cleanup rebreather specific settings:
Ideenmodellierer
parents:
703
diff
changeset
|
662 |
|
754
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
663 if(DataEX_external_ADC_Present()) |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
664 { |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
665 setEvent(StMHARD3_Sensor_Detect, (uint32_t)OnAction_Sensor_Detect); |
|
ec7b62983a8c
Only show autodetection in sensor menu if external interface is present:
Ideenmodellierer
parents:
748
diff
changeset
|
666 } |
| 38 | 667 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); |
| 668 } | |
| 669 | |
| 670 | |
| 671 uint8_t OnAction_Sensor1(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 672 { | |
| 783 | 673 const SDiveState *pStateReal = stateRealGetPointer(); |
| 674 | |
| 827 | 675 if((pStateReal->lifeData.extIf_sensor_map[0] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[0] == SENSOR_CO2M)) |
| 783 | 676 { |
| 677 return EXIT_TO_INFO_SENSOR; | |
| 678 } | |
| 679 else | |
| 680 { | |
| 681 if(settingsGetPointer()->ppo2sensors_deactivated & 1) | |
| 682 { | |
| 683 settingsGetPointer()->ppo2sensors_deactivated &= 4+2; | |
| 684 tMenuEdit_set_on_off(editId, 1); | |
| 685 } | |
| 686 else | |
| 687 { | |
| 688 settingsGetPointer()->ppo2sensors_deactivated |= 1; | |
| 689 tMenuEdit_set_on_off(editId, 0); | |
| 690 } | |
| 691 } | |
| 38 | 692 |
| 693 return UPDATE_DIVESETTINGS; | |
| 694 } | |
| 695 | |
| 696 | |
| 697 uint8_t OnAction_Sensor2(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 698 { | |
| 783 | 699 const SDiveState *pStateReal = stateRealGetPointer(); |
| 38 | 700 |
| 827 | 701 if((pStateReal->lifeData.extIf_sensor_map[1] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[1] == SENSOR_CO2M)) |
| 783 | 702 { |
| 703 return EXIT_TO_INFO_SENSOR; | |
| 704 } | |
| 705 else | |
| 706 { | |
| 707 if(settingsGetPointer()->ppo2sensors_deactivated & 2) | |
| 708 { | |
| 709 settingsGetPointer()->ppo2sensors_deactivated &= 4+1; | |
| 710 tMenuEdit_set_on_off(editId, 1); | |
| 711 } | |
| 712 else | |
| 713 { | |
| 714 settingsGetPointer()->ppo2sensors_deactivated |= 2; | |
| 715 tMenuEdit_set_on_off(editId, 0); | |
| 716 } | |
| 717 } | |
| 38 | 718 return UPDATE_DIVESETTINGS; |
| 719 } | |
| 720 | |
| 721 | |
| 722 uint8_t OnAction_Sensor3(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 723 { | |
| 783 | 724 const SDiveState *pStateReal = stateRealGetPointer(); |
| 725 | |
| 827 | 726 if((pStateReal->lifeData.extIf_sensor_map[2] == SENSOR_DIGO2M) || (pStateReal->lifeData.extIf_sensor_map[2] == SENSOR_CO2M)) |
| 783 | 727 { |
| 728 return EXIT_TO_INFO_SENSOR; | |
| 729 } | |
| 730 else | |
| 731 { | |
| 38 | 732 |
| 783 | 733 if(settingsGetPointer()->ppo2sensors_deactivated & 4) |
| 734 { | |
| 735 settingsGetPointer()->ppo2sensors_deactivated &= 2+1; | |
| 736 tMenuEdit_set_on_off(editId, 1); | |
| 737 } | |
| 738 else | |
| 739 { | |
| 740 settingsGetPointer()->ppo2sensors_deactivated |= 4; | |
| 741 tMenuEdit_set_on_off(editId, 0); | |
| 742 } | |
| 743 } | |
| 38 | 744 return UPDATE_DIVESETTINGS; |
| 745 } | |
| 746 | |
| 747 | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
748 uint8_t OnAction_O2_Calibrate (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
749 { |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
750 uint8_t loop; |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
751 const SDiveState *pStateReal = stateRealGetPointer(); |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
752 SSettings* pSettings = settingsGetPointer(); |
| 584 | 753 uint8_t retVal = UNSPECIFIC_RETURN; |
| 754 float compensatedRef; | |
| 38 | 755 |
| 584 | 756 if(action == ACTION_BUTTON_ENTER_FINAL) |
| 757 { | |
| 758 if(O2_calib_gas == 21) | |
| 759 { | |
| 760 compensatedRef = O2_CALIB_FRACTION_AIR * pStateReal->lifeData.pressure_ambient_bar / 1.0; | |
| 761 } | |
| 762 else | |
| 763 { | |
| 605 | 764 compensatedRef = O2_CALIB_FRACTION_O2 * pStateReal->lifeData.pressure_ambient_bar / 1.0; |
| 584 | 765 } |
| 766 for(loop=0;loop<3;loop++) | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
767 { |
| 584 | 768 if((pSettings->ppo2sensors_deactivated & (0x1 << loop)) == 0) |
| 769 { | |
| 770 if(pStateReal->lifeData.sensorVoltage_mV[loop] > 0.0001) /* sensor connected ?*/ | |
| 771 { | |
|
724
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
772 #ifdef ENABLE_EXTERNAL_PRESSURE |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
773 if(loop == 2) |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
774 { |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
775 compensatedRef = pStateReal->lifeData.pressure_ambient_bar; |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
776 } |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
777 #endif |
|
f285424f04d9
Development feature: external pressure sensor
Ideenmodellierer
parents:
718
diff
changeset
|
778 |
| 584 | 779 pSettings->ppo2sensors_calibCoeff[loop] = compensatedRef / pStateReal->lifeData.sensorVoltage_mV[loop]; |
| 780 } | |
| 781 else | |
| 782 { | |
| 783 pSettings->ppo2sensors_calibCoeff[loop] = 0.0; | |
| 784 settingsGetPointer()->ppo2sensors_deactivated |= 0x1 << loop; | |
| 785 } | |
| 786 } | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
787 } |
| 584 | 788 tMenuEdit_newInput(editId, O2_calib_gas, 0, 0, 0); |
| 789 retVal = UPDATE_DIVESETTINGS; | |
| 790 } | |
| 791 if(action == ACTION_BUTTON_NEXT) | |
| 792 { | |
| 793 if(O2_calib_gas == 21) | |
| 794 { | |
|
673
d7c5d592076b
Show 98% in case of Oxygen as the calibrating gas
heinrichsweikamp
parents:
605
diff
changeset
|
795 O2_calib_gas = 98; |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
796 } |
| 584 | 797 else |
| 798 { | |
| 799 O2_calib_gas = 21; | |
| 800 } | |
| 801 } | |
| 802 retVal = O2_calib_gas; | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
803 |
| 584 | 804 if(action == ACTION_BUTTON_BACK) |
| 805 { | |
| 806 exitMenuEditField(); | |
| 807 } | |
| 808 | |
| 809 return retVal; | |
|
562
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
810 } |
|
ec76fa85009e
Added ADC sensor interface to O2 sensore menu structure:
Ideenmodellierer
parents:
539
diff
changeset
|
811 |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
812 uint8_t OnAction_Sensor_Info(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
813 { |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
814 return EXIT_TO_INFO_SENSOR; |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
815 } |
|
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
816 |
|
730
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
817 uint8_t OnAction_Sensor_Detect(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
818 { |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
819 DataEX_setExtInterface_Cmd(EXT_INTERFACE_AUTODETECT); |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
820 return UNSPECIFIC_RETURN; |
|
9c65d226f4f6
Update sensor menu support for automatic sensor detection:
Ideenmodellierer
parents:
724
diff
changeset
|
821 } |
|
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
709
diff
changeset
|
822 |
| 38 | 823 void openEdit_Brightness(void) |
| 824 { | |
| 825 uint8_t actualBrightness; | |
| 826 SSettings *pSettings = settingsGetPointer(); | |
| 827 | |
| 828 actualBrightness = pSettings->brightness; | |
| 829 actualBrightness++; | |
| 830 if(actualBrightness > 4) | |
| 831 actualBrightness = 0; | |
| 832 pSettings->brightness = actualBrightness; | |
| 833 exitEditWithUpdate(); | |
| 834 } | |
| 835 | |
| 836 | |
| 837 void buttonBalanceText_helper(uint8_t idOfButton, char *textOutput) | |
| 838 { | |
| 839 uint8_t txtcount = 0; | |
| 840 | |
| 841 if(idOfButton < 3) | |
| 842 { | |
| 843 textOutput[txtcount++] = '@' + settingsGetPointer()->buttonBalance[idOfButton]; | |
| 844 textOutput[txtcount++] = ' '; | |
| 845 textOutput[txtcount++] = ' '; | |
| 846 textOutput[txtcount++] = '('; | |
| 847 | |
| 848 switch(settingsGetPointer()->buttonBalance[idOfButton]) | |
| 849 { | |
| 850 case 1: | |
| 851 textOutput[txtcount++] = '-'; | |
| 852 textOutput[txtcount++] = '2'; | |
| 853 textOutput[txtcount++] = '0'; | |
| 854 break; | |
| 855 case 2: | |
| 856 textOutput[txtcount++] = '-'; | |
| 857 textOutput[txtcount++] = '1'; | |
| 858 textOutput[txtcount++] = '0'; | |
| 859 break; | |
| 860 case 3: | |
| 861 default: | |
| 862 textOutput[txtcount++] = '0'; | |
| 863 break; | |
| 864 case 4: | |
| 865 textOutput[txtcount++] = '+'; | |
| 866 textOutput[txtcount++] = '1'; | |
| 867 textOutput[txtcount++] = '0'; | |
| 868 break; | |
| 869 case 5: | |
| 870 textOutput[txtcount++] = '+'; | |
| 871 textOutput[txtcount++] = '2'; | |
| 872 textOutput[txtcount++] = '0'; | |
| 873 break; | |
| 874 } | |
| 875 textOutput[txtcount++] = ')'; | |
| 876 } | |
| 877 textOutput[txtcount++] = 0; | |
| 878 } | |
| 879 | |
| 880 /**# | |
| 881 ****************************************************************************** | |
| 882 * @brief BUTTONS | |
| 883 * @author heinrichs weikamp gmbh | |
| 884 * @version V 01 | |
| 885 * @date 15-Sept-2016 | |
| 886 ****************************************************************************** | |
| 887 * Button 0 is right, Button 1 is middle, Button 2 is left !!!! | |
| 888 * 2 1 0 (base value 3) | |
| 889 * Button 3 is used to store the base value, all others are balanced around this one! | |
| 890 * | |
| 891 */ | |
| 892 | |
| 893 void openEdit_ButtonSens(void) | |
| 894 { | |
| 895 char text[32]; | |
| 896 uint8_t sens; | |
| 897 const uint32_t eventListButtonBalance[3] = {StMHARD5_ButtonBalance1,StMHARD5_ButtonBalance2,StMHARD5_ButtonBalance3}; | |
| 898 | |
| 899 sens = (uint8_t)settingsGetPointer()->ButtonResponsiveness[3]; | |
| 900 write_field_3digit(StMHARD5_Button1, 360, 780, ME_Y_LINE1, &FontT48, "###", sens, 0, 0, 0); | |
| 901 | |
| 902 for(int i=2;i>=0;i--) | |
| 903 { | |
| 904 buttonBalanceText_helper(i,text); | |
| 905 write_field_button(eventListButtonBalance[i],360,500,ME_Y_LINE4-(i*ME_Y_LINE_STEP),&FontT48,text); | |
| 906 } | |
| 907 | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
908 snprintf(text,32,"%c",TXT_ButtonLock); |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
909 write_field_on_off(StMHARD5_ButtonLock, 30, 95, ME_Y_LINE5, &FontT48, text, settingsGetPointer()->buttonLockActive); |
| 38 | 910 |
| 911 setEvent(StMHARD5_Button1, (uint32_t)OnAction_Button); | |
| 912 | |
| 913 for(int i=2;i>=0;i--) | |
| 914 { | |
| 915 setEvent(eventListButtonBalance[i], (uint32_t)OnAction_ButtonBalance); | |
| 916 } | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
917 setEvent(StMHARD5_ButtonLock, (uint32_t)OnAction_ButtonLock); |
| 38 | 918 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); |
| 919 } | |
| 920 | |
| 921 | |
| 922 void refresh_ButtonValuesFromPIC(void) | |
| 923 { | |
| 924 uint8_t sens[3]; | |
| 925 char text[64]; | |
| 926 | |
| 927 text[0] = '\001'; | |
| 928 text[1] = TXT_2BYTE; | |
| 929 text[2] = TXT2BYTE_ButtonSensitivity; | |
| 930 text[3] = 0; | |
| 931 write_topline(text); | |
| 932 | |
| 933 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 934 | |
| 935 for(int i=0;i<3;i++) | |
| 936 { | |
| 937 text[0] = TXT_2BYTE; | |
| 938 text[1] = TXT2BYTE_ButtonLeft+i; | |
| 939 text[2] = 0; | |
| 940 write_label_var( 20, 300, ME_Y_LINE2+(i*ME_Y_LINE_STEP), &FontT48, text); | |
| 941 } | |
| 942 | |
| 943 for(int i=0;i<3;i++) | |
| 944 { | |
| 945 sens[i] = settingsHelperButtonSens_translate_hwOS_values_to_percentage(stateRealGetPointer()->lifeData.buttonPICdata[i]); | |
| 946 } | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
947 snprintf(text,64,"\020\016\016%c%c \017 (%03u %03u %03u)",TXT_2BYTE,TXT2BYTE_LowerIsLess,sens[2],sens[1],sens[0]); |
| 38 | 948 write_label_var( 20, 340, ME_Y_LINE6, &FontT42, text); |
| 949 | |
| 950 tMenuEdit_refresh_field(StMHARD5_Button1); | |
| 951 tMenuEdit_refresh_field(StMHARD5_ButtonBalance1); | |
| 952 tMenuEdit_refresh_field(StMHARD5_ButtonBalance2); | |
| 953 tMenuEdit_refresh_field(StMHARD5_ButtonBalance3); | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
954 tMenuEdit_refresh_field(StMHARD5_ButtonLock); |
| 38 | 955 } |
| 956 | |
| 957 | |
| 958 uint8_t OnAction_Button(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 959 { | |
| 960 uint8_t digitContentNew, remainder; | |
| 961 uint32_t newSensitivityGlobal; | |
| 962 | |
| 963 if(action == ACTION_BUTTON_NEXT) | |
| 964 { | |
| 965 digitContentNew = digitContent - '0'; | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
966 if(digitContentNew >= MAX_BUTTONRESPONSIVENESS_GUI) |
| 38 | 967 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
968 digitContentNew = MIN_BUTTONRESPONSIVENESS_GUI; |
| 38 | 969 } |
| 970 else | |
| 971 { | |
| 972 remainder = digitContentNew%5; | |
| 973 digitContentNew += 5 - remainder; | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
974 if(digitContentNew >= MAX_BUTTONRESPONSIVENESS_GUI) |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
975 digitContentNew = MAX_BUTTONRESPONSIVENESS_GUI; |
| 38 | 976 } |
| 977 return '0' + digitContentNew; | |
| 978 } | |
| 979 | |
| 980 if(action == ACTION_BUTTON_BACK) | |
| 981 { | |
| 982 digitContentNew = digitContent - '0'; | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
983 if(digitContentNew <= MIN_BUTTONRESPONSIVENESS_GUI) |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
984 digitContentNew = MAX_BUTTONRESPONSIVENESS_GUI; |
| 38 | 985 else |
| 986 { | |
| 987 remainder = digitContentNew%5; | |
| 988 if(remainder) | |
| 989 digitContentNew -= remainder; | |
| 990 else | |
| 991 digitContentNew -= 5; | |
| 992 } | |
| 993 return '0' + digitContentNew; | |
| 994 } | |
| 995 | |
| 996 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 997 { | |
| 998 evaluateNewString(editId, &newSensitivityGlobal, 0, 0, 0); | |
| 999 settingsHelperButtonSens_keepPercentageValues(newSensitivityGlobal, settingsGetPointer()->ButtonResponsiveness); | |
| 1000 setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); | |
| 1001 return UNSPECIFIC_RETURN; | |
| 1002 } | |
| 1003 return digitContent; | |
| 1004 } | |
| 1005 | |
| 1006 | |
| 1007 uint8_t OnAction_ButtonBalance(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1008 { | |
| 1009 int8_t idBalance = -1; | |
| 1010 uint8_t *ptrSetting; | |
| 1011 char text[32]; | |
| 1012 | |
| 1013 const uint32_t eventListButtonBalance[3] = {StMHARD5_ButtonBalance1,StMHARD5_ButtonBalance2,StMHARD5_ButtonBalance3}; | |
| 1014 | |
| 1015 idBalance = -1; | |
| 1016 for(int i=0;i<3;i++) | |
| 1017 { | |
| 1018 if(editId == eventListButtonBalance[i]) | |
| 1019 { | |
| 1020 idBalance = i; | |
| 1021 break; | |
| 1022 } | |
| 1023 } | |
| 1024 | |
| 1025 if((idBalance >= 0) && (idBalance < 3)) | |
| 1026 { | |
| 1027 ptrSetting = &settingsGetPointer()->buttonBalance[idBalance]; | |
| 1028 | |
| 1029 *ptrSetting += 1; | |
| 1030 | |
| 1031 if(*ptrSetting > 5) | |
| 1032 *ptrSetting = 2; | |
| 1033 | |
| 1034 buttonBalanceText_helper(idBalance,text); | |
| 1035 tMenuEdit_newButtonText(eventListButtonBalance[idBalance],text); | |
| 1036 } | |
| 1037 | |
| 1038 return UNSPECIFIC_RETURN; | |
| 1039 } | |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1040 |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1041 uint8_t OnAction_ButtonLock(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1042 { |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1043 SSettings *pSettings = settingsGetPointer(); |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1044 |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1045 if(pSettings->buttonLockActive) |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1046 { |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1047 pSettings->buttonLockActive = 0; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1048 tMenuEdit_set_on_off(editId, 0); |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1049 } |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1050 else |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1051 { |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1052 pSettings->buttonLockActive = 1; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1053 tMenuEdit_set_on_off(editId, 1); |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1054 } |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1055 |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1056 return UNSPECIFIC_RETURN; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
734
diff
changeset
|
1057 } |