Mercurial > public > ostc4
annotate Small_CPU/Src/batteryGasGauge.c @ 311:ddbe8bed5096 cleanup-4
bugfix: make stopwatch and divetime run in sync
And this shows the fundamental issue in the difference between dive time and
stopwatch time. The dive time is constructed on the RTE, and rather
independently, the stopwatch time is constructed on CPU1.
This works rather well, but not perfect. This commit fixes things in
a relatively straightforward way. Instead of incrementing the stopwatch
locally on CPU1, simply use the same time data that is coming from the
RTE. Some logic was added to make this stopwatch resettable again.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Wed, 29 May 2019 14:02:27 +0200 |
| parents | b23de15e2861 |
| children | 2defc8cd93ce |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file batteryGasGauge.c | |
| 4 * @author heinrichs weikamp gmbh | |
| 5 * @version V0.0.1 | |
| 6 * @date 09-Dec-2014 | |
| 7 * @brief LTC2942 Battery Gas Gauge | |
| 8 * | |
| 9 @verbatim | |
| 10 ============================================================================== | |
| 11 ##### stm32f4xx_hal_i2c.c modification ##### | |
| 12 ============================================================================== | |
| 13 The LTC2942 requires an repeated start condition without stop condition | |
| 14 for data reception. | |
| 15 | |
| 16 @endverbatim | |
| 17 ****************************************************************************** | |
| 18 * @attention | |
| 19 * | |
| 20 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 21 * | |
| 22 ****************************************************************************** | |
| 23 */ | |
| 24 /* Includes ------------------------------------------------------------------*/ | |
| 25 #include "batteryGasGauge.h" | |
| 26 #include "baseCPU2.h" | |
| 27 #include "stm32f4xx_hal.h" | |
| 28 #include "i2c.h" | |
| 29 | |
|
228
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
30 static float battery_f_voltage = 0; |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
31 static float battery_f_charge_percent = 0; |
| 38 | 32 |
| 33 #define BGG_BATTERY_OFFSET (26123) //; 65536-(3,35Ah/0,085mAh) | |
|
228
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
34 #define BGG_BATTERY_DIVIDER (394) //; 3,35Ah/0,085mAh/100 [%] |
| 38 | 35 |
| 36 float get_voltage(void) | |
| 37 { | |
| 38 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
| 39 return 3.0f; | |
| 40 #endif | |
| 41 | |
| 42 return battery_f_voltage; | |
| 43 } | |
| 44 | |
| 45 | |
| 46 float get_charge(void) | |
| 47 { | |
| 48 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
| 49 return 100.0f; | |
| 50 #endif | |
| 51 | |
| 52 return battery_f_charge_percent; | |
| 53 } | |
| 54 | |
| 55 | |
| 56 void init_battery_gas_gauge(void) | |
| 57 { | |
| 58 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
| 59 return; | |
| 60 #endif | |
| 61 | |
| 62 uint8_t buffer[2]; | |
| 63 buffer[0] = 0x01; | |
|
228
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
64 |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
65 // F8 = 11111000: |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
66 // Vbat 3.0V (11) |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
67 // Prescale M = 128 (111) |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
68 // AL/CC pin disable (0) |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
69 // Shutdown (0) |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
70 buffer[1] = 0xF8; |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
71 I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2); |
| 38 | 72 } |
| 73 | |
|
242
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
74 static void disable_adc(void) |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
75 { |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
76 uint8_t buffer[2]; |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
77 buffer[0] = 0x01; |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
78 |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
79 // according to the datasheet of the LTC2942, the adc shall |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
80 // be disabled when writing to the gauge registers |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
81 |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
82 // 0xF9 = 11111001: |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
83 // see init_battery_gas_gauge() |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
84 // Shutdown (1) |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
85 buffer[1] = 0xF9; |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
86 I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2); |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
87 } |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
88 |
| 38 | 89 |
| 90 void battery_gas_gauge_get_data(void) | |
| 91 { | |
| 92 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
| 93 return; | |
| 94 #endif | |
| 95 | |
| 96 float battery_f_voltage_local; | |
| 97 float battery_f_charge_percent_local; | |
| 98 | |
| 99 uint8_t bufferReceive[10]; | |
| 100 I2C_Master_Receive( DEVICE_BATTERYGAUGE, bufferReceive, 10); | |
| 101 | |
| 102 battery_f_voltage_local = (float)(bufferReceive[8] * 256); | |
| 103 battery_f_voltage_local += (float)(bufferReceive[9]); | |
| 104 battery_f_voltage_local *= (float)6 / (float)0xFFFF; | |
| 105 | |
| 106 // max/full: 0.085 mAh * 1 * 65535 = 5570 mAh | |
| 107 battery_f_charge_percent_local = (float)(bufferReceive[2] * 256); | |
| 108 battery_f_charge_percent_local += (float)(bufferReceive[3]); | |
| 109 battery_f_charge_percent_local -= BGG_BATTERY_OFFSET; | |
|
228
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
110 battery_f_charge_percent_local /= BGG_BATTERY_DIVIDER; |
| 38 | 111 |
| 112 if(battery_f_charge_percent_local < 0) | |
| 113 battery_f_charge_percent_local = 0; | |
| 114 | |
| 115 battery_f_voltage = battery_f_voltage_local; | |
| 116 battery_f_charge_percent = battery_f_charge_percent_local; | |
| 117 } | |
| 118 | |
| 119 | |
| 120 void battery_gas_gauge_set_charge_full(void) | |
| 121 { | |
|
242
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
122 disable_adc(); |
| 38 | 123 #ifdef OSTC_ON_DISCOVERY_HARDWARE |
| 124 return; | |
| 125 #endif | |
| 126 | |
| 127 uint8_t bufferSend[3]; | |
| 128 bufferSend[0] = 0x02; | |
| 129 bufferSend[1] = 0xFF; | |
| 130 bufferSend[2] = 0xFF; | |
| 131 I2C_Master_Transmit( DEVICE_BATTERYGAUGE, bufferSend, 3); | |
|
242
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
132 init_battery_gas_gauge(); |
| 38 | 133 } |
| 134 | |
| 135 | |
| 136 void battery_gas_gauge_set(float percentage) | |
| 137 { | |
|
242
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
138 |
|
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
139 disable_adc(); |
| 38 | 140 #ifdef OSTC_ON_DISCOVERY_HARDWARE |
| 141 return; | |
| 142 #endif | |
| 143 | |
| 144 uint16_t mAhSend; | |
| 145 | |
| 146 if(percentage >= 100) | |
| 147 mAhSend = 0xFFFF; | |
|
228
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
148 else { |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
149 mAhSend = (percentage * BGG_BATTERY_DIVIDER) + BGG_BATTERY_OFFSET; |
|
f9ba924d188e
Bugfix: set battery percentage correctly after RTE update
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
150 } |
| 38 | 151 |
| 152 uint8_t bufferSend[3]; | |
| 153 bufferSend[0] = 0x02; | |
| 154 bufferSend[1] = (uint8_t)(mAhSend / 256); | |
| 155 bufferSend[2] = (uint8_t)(mAhSend & 0xFF); | |
| 156 I2C_Master_Transmit( DEVICE_BATTERYGAUGE, bufferSend, 3); | |
|
242
b23de15e2861
Comply to datasheet when resetting battery gauge registers
Jan Mulder <jlmulder@xs4all.nl>
parents:
228
diff
changeset
|
157 init_battery_gas_gauge(); |
| 38 | 158 } |
| 159 | |
| 160 | |
| 161 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |