Mercurial > public > ostc4
annotate Small_CPU/Inc/spi.h @ 224:ceecabfddb57 div-fixes-3
Bugfix, deco: fix 2 (small) problems with calculated ceiling
This fixes 1 trivial, and 1 not really trivial bug in the calculation
of the ceiling. When simulating a bounce dive to 80m, things become
clear (tried this on a CCR dive, fixed setpoint 1.2bar, about 15 minutes
of bottom time). Closely watch the behavior of the ceiling data. At some
point during the ascent, the ceiling begins to decrease in 10cm steps.
Then suddenly (while still ascending), the ceiling increases again with 1m,
does not change for some time, and then suddenly steps 1.1m less deep.
While not very relevant to real deco diving, it is simply wrong.
The reason for this is subtle. The algorithm used to find the ceiling
is a sort of linear search, stepping down a meter, overshoot the depth, and
search back in 10cm steps. It seems some numerical instability. Fixing
this, was a bit more computational intensive search by stepping up down in
equal steps of 10cm. But, I'm pretty sure that things can be speeded up here, as a
ceiling does not change fast, so it should be not that difficult to limit
the search space, or use a binary search algorithm instead.
The trivial second problem fixed, is that the ceiling ends at the surface
and not at 1m depth. This small issue became visible after changing the step
down size above.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Sun, 31 Mar 2019 19:35:51 +0200 |
parents | 8117802894a4 |
children | b3685fbada3b |
rev | line source |
---|---|
38 | 1 /** |
2 ****************************************************************************** | |
3 * @file spi.h | |
4 * @author heinrichs weikamp gmbh | |
5 * @version V0.0.1 | |
6 * @date 16-Sept-2014 | |
7 * @brief Header file for spi control | |
8 ****************************************************************************** | |
9 * @attention | |
10 * | |
11 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
12 * | |
13 ****************************************************************************** | |
14 */ | |
15 | |
16 /* Define to prevent recursive inclusion -------------------------------------*/ | |
17 #ifndef SPI_H | |
18 #define SPI_H | |
19 | |
20 #ifdef __cplusplus | |
21 extern "C" { | |
22 #endif | |
23 | |
24 /* Includes ------------------------------------------------------------------*/ | |
25 #include "stm32f4xx_hal.h" | |
26 | |
27 extern SPI_HandleTypeDef hspi1; | |
28 | |
29 void MX_SPI1_Init(void); | |
30 //void SPI_Start_single_TxRx_with_Master_and_Stop_ChipSelectControl(void); | |
31 void SPI_Start_single_TxRx_with_Master(void); | |
32 void SPI_synchronize_with_Master(void); | |
184 | 33 void SPI_Evaluate_RX_Data(void); /*process the data received during last 100ms cycle */ |
34 | |
38 | 35 void MX_SPI_DeInit(void); |
36 | |
37 /* button adjust */ | |
38 void MX_SPI3_Init(void); | |
39 void MX_SPI3_DeInit(void); | |
40 uint8_t SPI3_ButtonAdjust(uint8_t *arrayInput, uint8_t *arrayOutput); | |
104 | 41 void MX_SPI_DeInit(void); |
42 | |
43 | |
38 | 44 #ifdef __cplusplus |
45 } | |
46 #endif | |
47 #endif /* SPI_H */ | |
48 | |
49 /** | |
50 * @} | |
51 */ | |
52 | |
53 /** | |
54 * @} | |
55 */ | |
56 | |
57 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |