Mercurial > public > ostc4
annotate Common/Inc/settings.h @ 530:c880907fd1d7
Bugfix: No need to consider surface custom view in count of enabled view:
In early motion control versions the detection was also applied in surface mode (as development support). The condition check is no longer needed because motion control is only applied in dive mode.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 15 Sep 2020 20:54:54 +0200 |
| parents | 88c626d01ee5 |
| children | d784f281833a |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/settings.h | |
| 5 /// \brief | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef SETTINGS_H | |
| 28 #define SETTINGS_H | |
| 29 | |
| 30 // From Common/Inc: | |
| 31 #include "FirmwareData.h" | |
| 32 | |
| 33 //#include "data_central.h" | |
| 34 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
35 #include "global_constants.h" |
| 38 | 36 // From Common/Drivers/ |
| 37 #include "stm32f4xx_hal.h" | |
| 38 | |
| 39 #include <stdint.h> | |
| 40 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
41 |
| 38 | 42 #define NUM_GASES 5 |
| 43 #define NUM_OFFSET_DILUENT 5 | |
| 44 #define SPECIAL_GAS_ID 0 | |
| 45 | |
| 46 #define ERROR_ 0xFF | |
| 47 | |
| 48 #define CCRMODE_FixedSetpoint 0 | |
| 49 #define CCRMODE_Sensors 1 | |
| 50 | |
| 51 #define DIVEMODE_OC 0 | |
| 52 #define DIVEMODE_CCR 1 | |
| 53 #define DIVEMODE_Gauge 2 | |
| 54 #define DIVEMODE_Apnea 3 | |
| 55 | |
| 56 #define GF_MODE 1 | |
| 57 #define VPM_MODE 2 | |
| 58 | |
| 59 #define VPM_FROM_FORTRAN 0 | |
| 60 #define VPM_BACHELORWORK 1 | |
| 61 | |
| 62 #define BUEHLMANN_OSTC4 0 | |
| 63 #define BUEHLMANN_hwOS 1 | |
| 64 | |
| 65 #define MMDDYY 0 | |
| 66 #define DDMMYY 1 | |
| 67 #define YYMMDD 2 | |
| 68 | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
69 #define PRESSURE_OFFSET_LIMIT_MBAR 50 |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
70 |
| 38 | 71 /* 2015 Jan 30, hw, deco and travel added for MenuEditGas |
| 72 * can be used for buehlmann, vpm, etc. later but be carefull | |
| 73 * with current implemenation */ | |
| 74 typedef struct{ | |
| 75 uint8_t active:1; | |
| 76 uint8_t first:1; | |
| 77 uint8_t deco:1; | |
| 78 uint8_t travel:1; | |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
79 uint8_t off:1; |
|
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
80 uint8_t spare:3; |
| 38 | 81 } gasubit8_t; |
| 82 | |
| 83 typedef union{ | |
| 84 gasubit8_t ub; | |
| 85 uint8_t uw; | |
| 86 } gasbit8_Type; | |
| 87 | |
| 88 typedef struct{ | |
| 89 uint8_t standard:4; | |
| 90 uint8_t alternative:4; | |
| 91 } ubit2x4_t; | |
| 92 | |
| 93 typedef union{ | |
| 94 ubit2x4_t ub; | |
| 95 uint8_t uw; | |
| 96 } split2x4_Type; | |
| 97 | |
| 98 typedef union{ | |
| 99 uint8_t u8[4]; | |
| 100 uint32_t u32; | |
| 101 } general32to8_Type; | |
| 102 | |
| 103 typedef struct | |
| 104 { | |
| 105 uint8_t oxygen_percentage; | |
| 106 uint8_t helium_percentage; | |
| 107 gasbit8_Type note; | |
| 108 uint8_t depth_meter; | |
| 109 uint8_t depth_meter_travel; | |
| 110 uint8_t bottle_size_liter; | |
| 111 // uint8_t bottle_wireless_status; | |
| 112 uint16_t bottle_wireless_id; | |
| 113 } SGasLine; | |
| 114 | |
| 115 typedef struct | |
| 116 { | |
| 117 uint8_t setpoint_cbar; | |
| 118 uint8_t depth_meter; | |
| 119 gasbit8_Type note; | |
| 120 } SSetpointLine; | |
| 121 | |
| 122 /* SSettings | |
| 123 * gas[0] and setpoint[0] are the special ones configurable during the dive | |
| 124 */ | |
| 125 typedef struct | |
| 126 { | |
| 127 uint32_t header; | |
| 128 uint8_t warning_blink_dsec; | |
| 129 uint8_t lastDiveLogId; | |
| 130 uint32_t logFlashNextSampleStartAddress; | |
| 131 SGasLine gas[1 + (2*NUM_GASES)]; | |
| 132 SSetpointLine setpoint[1 + NUM_GASES]; | |
| 133 uint8_t CCR_Mode; | |
| 134 uint8_t dive_mode; | |
| 135 split2x4_Type deco_type; | |
| 136 uint8_t ppO2_max_deco; | |
| 137 uint8_t ppO2_max_std; | |
| 138 uint8_t ppO2_min; | |
| 139 uint8_t CNS_max; | |
| 140 uint8_t ascent_MeterPerMinute_max; | |
| 141 uint8_t ascent_MeterPerMinute_showGraph; | |
| 142 uint8_t future_TTS; | |
| 143 uint8_t GF_high; | |
| 144 uint8_t GF_low; | |
| 145 uint8_t aGF_high; | |
| 146 uint8_t aGF_low; | |
| 147 split2x4_Type VPM_conservatism; | |
| 148 uint8_t safetystopDuration; | |
| 149 uint8_t AtemMinutenVolumenLiter; | |
| 150 uint8_t ReserveFractionDenominator; | |
| 151 uint8_t salinity; | |
| 152 uint8_t last_stop_depth_meter; | |
| 153 uint8_t stop_increment_depth_meter; | |
| 154 uint8_t brightness; | |
| 155 uint8_t date_format; | |
| 156 uint8_t selected_language; | |
| 157 char customtext[60]; | |
| 158 uint16_t timeoutSurfacemode; | |
| 159 uint8_t timeoutMenuSurface; | |
| 160 uint8_t timeoutMenuDive; | |
| 161 uint8_t timeoutMenuEdit; | |
| 162 uint8_t timeoutInfo; | |
| 163 uint8_t timeoutInfoCompass; | |
| 164 uint8_t design; | |
| 165 uint16_t timeoutDiveReachedZeroDepth; | |
| 166 uint16_t divetimeToCreateLogbook; | |
| 167 uint8_t serialHigh; | |
| 168 uint8_t serialLow; | |
| 169 // SUFirmware firmwareVersion16to32bit; | |
| 170 uint32_t backup_localtime_rtc_tr; | |
| 171 uint32_t backup_localtime_rtc_dr; | |
| 172 uint16_t totalDiveCounter; | |
| 173 uint16_t personalDiveCount; | |
| 174 uint8_t showDebugInfo; | |
| 175 uint8_t ButtonResponsiveness[4];// changed content in 0xFFFF0016 | |
| 176 uint8_t nonMetricalSystem; | |
| 177 uint8_t fallbackToFixedSetpoint; | |
| 178 uint8_t bluetoothActive; /* will be set to zero on each startup at the moment */ | |
| 179 uint8_t safetystopDepth; | |
| 180 uint32_t updateSettingsAllowedFromHeader; | |
| 181 uint8_t scooterControl; | |
| 182 uint8_t scooterDrag; | |
| 183 uint8_t scooterLoad; | |
| 184 uint8_t scooterNumberOfBatteries; | |
| 185 uint16_t scooterBattSize; | |
| 186 uint8_t scooterSPARE1[7]; | |
| 187 uint8_t scooterSPARE2[19]; | |
| 188 // new in 0xFFFF0006 | |
| 189 uint8_t ppo2sensors_deactivated; | |
| 190 uint8_t tX_colorscheme; | |
| 191 uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 192 uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 193 uint8_t tX_customViewPrimary; | |
| 194 uint8_t tX_customViewTimeout; | |
| 195 uint8_t timeoutEnterButtonSelectDive; | |
| 196 uint16_t logbookOffset; | |
| 197 uint8_t alwaysShowPPO2; | |
| 198 uint8_t extraDisplay; | |
| 199 uint16_t display_toogle_desc; | |
| 200 int8_t offsetPressure_mbar; | |
| 201 int8_t offsetTemperature_centigrad; | |
| 202 uint8_t gasConsumption_travel_l_min; | |
| 203 uint8_t gasConsumption_bottom_l_min; | |
| 204 uint8_t gasConsumption_deco_l_min; | |
| 205 uint8_t debugModeOnStart; | |
| 206 uint8_t IAmStolenPleaseKillMe; | |
| 207 int16_t compassBearing; | |
| 208 uint8_t lastKnownBatteryPercentage; | |
| 209 uint8_t buttonBalance[3]; // 0 = right, 1 = center, 2 = left | |
| 210 uint8_t firmwareVersion[4]; | |
| 211 uint16_t timeoutSurfacemodeWithSensors; | |
| 212 // new in 0xFFFF0016 | |
| 213 uint8_t VPM_model; | |
| 214 uint8_t GF_model; | |
| 215 // new in 0xFFFF0017 | |
| 216 uint8_t FactoryButtonBase; | |
| 217 uint8_t FactoryButtonBalance[3]; | |
|
112
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
218 /* new in 0xFFFF0018 */ |
|
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
219 uint8_t FlipDisplay; |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
220 /* new in 0xFFFF0019 */ |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
221 uint32_t cv_configuration; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
222 /* new in 0xFFFF001A */ |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
223 uint8_t MotionDetection; |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
224 /* new in 0xFFFF001B */ |
|
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
225 uint32_t cv_config_BigScreen; |
| 38 | 226 } SSettings; |
| 227 | |
| 228 typedef struct | |
| 229 { | |
| 230 // 8 bytes | |
| 231 uint16_t primarySerial; | |
| 232 uint8_t primaryLicence; | |
| 233 uint8_t revision8bit; | |
| 234 uint8_t production_year; | |
| 235 uint8_t production_month; | |
| 236 uint8_t production_day; | |
| 237 uint8_t production_bluetooth_name_set; | |
| 238 | |
| 239 // 44 bytes | |
| 240 char production_info[44]; | |
| 241 | |
| 242 // 8 bytes | |
| 243 uint16_t secondarySerial; | |
| 244 uint8_t secondaryLicence; | |
| 245 uint8_t secondaryReason8bit; | |
| 246 uint8_t secondary_year; | |
| 247 uint8_t secondary_month; | |
| 248 uint8_t secondary_day; | |
| 249 uint8_t secondary_bluetooth_name_set; | |
| 250 | |
| 251 // 4 bytes | |
| 252 char secondary_info[4]; | |
| 253 } SHardwareData; | |
| 254 | |
| 255 uint8_t writeData(uint8_t *); | |
| 256 uint8_t readData(uint8_t what,uint8_t *); | |
| 257 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data); | |
| 258 | |
| 259 uint8_t getPPO2Max(void); | |
| 260 uint8_t getPPO2Min(void); | |
| 261 uint8_t getDiveMode(void); | |
| 262 uint8_t getCCRMode(void); | |
| 263 uint8_t getDecoType(void); | |
| 264 uint8_t getFutureTTS(void); | |
| 265 | |
| 266 SSettings* settingsGetPointer(void); | |
| 267 const SSettings* settingsGetPointerStandard(void); | |
| 268 void set_settings_to_Standard(void); | |
| 269 void mod_settings_for_first_start_with_empty_ext_flash(void); | |
| 270 const SFirmwareData* firmwareDataGetPointer(void); | |
| 271 const SHardwareData* hardwareDataGetPointer(void); | |
| 272 uint8_t firmwareVersion_16bit_high(void); | |
| 273 uint8_t firmwareVersion_16bit_low(void); | |
| 274 void hardwareBatchCode(uint8_t *high, uint8_t *low); | |
| 275 | |
| 276 uint8_t RTEminimum_required_high(void); | |
| 277 uint8_t RTEminimum_required_low(void); | |
| 278 uint8_t FONTminimum_required_high(void); | |
| 279 uint8_t FONTminimum_required_low(void); | |
| 280 | |
| 281 void setActualRTEversion(uint8_t high, uint8_t low); | |
| 282 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow); | |
| 283 | |
| 284 void set_new_settings_missing_in_ext_flash(void); | |
| 285 uint8_t check_and_correct_settings(void); | |
| 286 uint8_t newFirmwareVersionCheckViaSettings(void); | |
| 287 void set_settings_button_to_standard_with_individual_buttonBalance(void); | |
| 288 uint8_t getLicence(void); | |
| 289 void firmwareGetDate(RTC_DateTypeDef *SdateOutput); | |
| 290 | |
| 291 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 292 | |
| 293 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray); | |
| 294 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray); | |
| 295 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray); | |
| 296 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray); | |
| 297 | |
| 298 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 299 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage); | |
| 300 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC); | |
| 301 | |
| 302 #endif // SETTINGS_H |