Mercurial > public > ostc4
annotate Small_CPU/Src/pressure.c @ 870:bc6c90e20d9e Evo_2_23
Instrument code for Bootloader:
the Bootloader was reactivated. Because some functions have changed in the past years an instrumentation had to be done to avoid compile issues (e.g. no multilanguage in Bootloader, no special fonts)
| author | Ideenmodellierer |
|---|---|
| date | Mon, 12 Aug 2024 22:25:46 +0200 |
| parents | 3311b720a072 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file pressure.c | |
| 4 * @author heinrichs weikamp gmbh | |
| 5 * @date 2014 | |
| 6 * @version V0.0.2 | |
| 7 * @since 20-Oct-2016 | |
| 8 * @brief | |
| 9 * | |
| 10 @verbatim | |
| 11 ============================================================================== | |
| 12 ##### How to use ##### | |
| 13 ============================================================================== | |
| 14 V0.0.2 18-Oct-2016 pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015 | |
| 15 | |
| 16 @endverbatim | |
| 17 ****************************************************************************** | |
| 18 * @attention | |
| 19 * | |
| 20 * <h2><center>© COPYRIGHT(c) 2016 heinrichs weikamp</center></h2> | |
| 21 * | |
| 22 ****************************************************************************** | |
| 23 */ | |
| 24 | |
| 25 | |
| 26 | |
| 27 /* surface time | |
| 28 the last 30 minutes will be saved once per minute in a endless loop | |
| 29 at the beginning of a dive the oldest value will be used | |
| 30 */ | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
31 #include "math.h" |
|
241
2b9775f71e30
cleanup: factor out I2C1_Status() and cleanup type
Jan Mulder <jlmulder@xs4all.nl>
parents:
186
diff
changeset
|
32 #include "scheduler.h" |
| 38 | 33 #include "pressure.h" |
| 34 #include "i2c.h" | |
| 35 #include "rtc.h" | |
| 36 | |
| 37 #define CMD_RESET 0x1E // ADC reset command | |
| 38 #define CMD_ADC_READ 0x00 // ADC read command | |
| 39 #define CMD_ADC_CONV 0x40 // ADC conversion command | |
| 40 #define CMD_ADC_D1 0x00 // ADC D1 conversion | |
| 41 #define CMD_ADC_D2 0x10 // ADC D2 conversion | |
| 42 #define CMD_ADC_256 0x00 // ADC OSR=256 | |
| 43 #define CMD_ADC_512 0x02 // ADC OSR=512 | |
| 44 #define CMD_ADC_1024 0x04 // ADC OSR=1024 | |
| 45 #define CMD_ADC_2048 0x06 // ADC OSR=2056 | |
| 46 #define CMD_ADC_4096 0x08 // ADC OSR=4096 | |
| 47 #define CMD_PROM_RD 0xA0 // Prom read command | |
| 48 | |
| 352 | 49 /* remove comment to use a predefined profile for pressure changes instead of real world data */ |
| 50 /* #define SIMULATE_PRESSURE */ | |
| 51 | |
|
688
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
52 |
| 535 | 53 #define PRESSURE_SURFACE_MAX_MBAR (1060.0f) /* It is unlikely that pressure at surface is greater than this value => clip to it */ |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
54 |
|
688
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
55 #define PRESSURE_MINIMUM (0.0f) |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
56 #define TEMPERATURE_MINIMUM (-100.0f) |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
57 |
| 352 | 58 #define PRESSURE_SURFACE_QUE (30u) /* history buffer [minutes] for past pressure measurements */ |
| 59 #define PRESSURE_SURFACE_EVA_WINDOW (15u) /* Number of entries evaluated during instability test. Used to avoid detection while dive enters water */ | |
| 60 #define PRESSURE_SURFACE_STABLE_LIMIT (10u) /* Define pressure as stable if delta (mBar) is below this value */ | |
| 61 #define PRESSURE_SURFACE_DETECT_STABLE_CNT (5u) /* Event count to detect stable condition */ | |
| 62 #define PRESSURE_SURFACE_UNSTABLE_LIMIT (50u) /* Define pressure as not stable if delta (mBar) is larger than this value */ | |
| 63 #define PRESSURE_SURFACE_DETECT_UNSTABLE_CNT (3u) /* Event count to detect unstable condition */ | |
| 64 | |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
65 |
| 356 | 66 static uint8_t PRESSURE_ADDRESS = DEVICE_PRESSURE_MS5803; /* Default Address */ |
| 67 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
68 static uint16_t get_ci_by_coef_num(uint8_t coef_num); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
69 //void pressure_calculation_new(void); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
70 //void pressure_calculation_old(void); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
71 static void pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015(void); |
| 356 | 72 //static uint8_t crc4(uint16_t n_prom[]); |
| 38 | 73 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
74 static HAL_StatusTypeDef pressure_sensor_get_data(void); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
75 static uint32_t get_adc(void); |
| 38 | 76 uint8_t pressureSensorInitSuccess = 0; |
| 77 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
78 static uint16_t C[8] = { 1 }; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
79 static uint32_t D1 = 1; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
80 static uint32_t D2 = 1; |
| 356 | 81 //static uint8_t n_crc; |
| 38 | 82 |
| 83 /* | |
| 84 short C2plus10000 = -1; | |
| 85 short C3plus200 = -1; | |
| 86 short C4minus250 = -1; | |
| 87 short UT1 = -1; | |
| 88 short C6plus100 = -1; | |
| 89 */ | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
90 static float pressure_offset = 0.0; /* Offset value which may be specified by the user via PC Software */ |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
91 static float temperature_offset = 0.0; /* Offset value which may be specified by the user via PC Software */ |
| 38 | 92 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
93 static float ambient_temperature = 0; |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
94 static float ambient_pressure_mbar = 1000.0; |
|
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
95 static float surface_pressure_mbar = 1000.0; |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
96 static float surface_ring_mbar[PRESSURE_SURFACE_QUE] = { 0 }; |
| 38 | 97 |
| 352 | 98 static uint8_t surface_pressure_writeIndex = 0; |
| 99 static float surface_pressure_stable_value = 0; | |
| 100 static uint8_t surface_pressure_stable = 0; | |
| 101 | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
102 static uint8_t secondCounterSurfaceRing = 0; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
103 static uint8_t avgCount = 0; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
104 static float runningAvg = 0; |
| 38 | 105 |
| 106 float get_temperature(void) | |
| 107 { | |
| 108 return ambient_temperature; | |
| 109 } | |
| 110 | |
| 111 float get_pressure_mbar(void) | |
| 112 { | |
| 113 return ambient_pressure_mbar; | |
| 114 } | |
| 115 | |
| 116 float get_surface_mbar(void) | |
| 117 { | |
| 118 return surface_pressure_mbar; | |
| 119 } | |
| 120 | |
| 121 | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
122 void init_surface_ring(uint8_t force) |
| 38 | 123 { |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
124 if((surface_ring_mbar[0] == 0) || (force)) /* only initialize once. Keep value in place in case of an i2c recovery */ |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
125 { |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
126 secondCounterSurfaceRing = 0; /* restart calculation */ |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
127 avgCount = 0; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
128 runningAvg = 0; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
129 |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
130 for(int i=0; i<PRESSURE_SURFACE_QUE; i++) |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
131 surface_ring_mbar[i] = ambient_pressure_mbar; |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
132 surface_pressure_mbar = ambient_pressure_mbar; |
|
858
08ea8e9d6cfe
Bugfix initialisation of surface pressure:
Ideenmodellierer
parents:
846
diff
changeset
|
133 surface_pressure_stable_value = surface_pressure_mbar; |
| 352 | 134 surface_pressure_writeIndex = 0; /* index of the oldest value in the ring buffer */ |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
135 } |
| 38 | 136 } |
| 137 | |
| 352 | 138 uint8_t is_surface_pressure_stable(void) |
| 139 { | |
| 140 return surface_pressure_stable; | |
| 141 } | |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
142 |
| 352 | 143 float set_last_surface_pressure_stable(void) |
| 144 { | |
| 145 surface_pressure_mbar = surface_pressure_stable_value; | |
| 146 return surface_pressure_stable_value; | |
| 147 } | |
| 148 | |
| 149 /* iterate backward through the history memory and evaluate the changes pressure changes during the last 30 minutes */ | |
| 150 void evaluate_surface_pressure() | |
| 151 { | |
| 152 uint8_t index; | |
| 153 float lastvalue; | |
| 154 uint8_t stablecnt = 0; | |
| 155 uint8_t unstablecnt = 0; | |
| 156 uint8_t EvaluationWindow = PRESSURE_SURFACE_QUE - PRESSURE_SURFACE_EVA_WINDOW; /* do not use the latest 15 values to avoid unstable condition due to something like fin handling */ | |
| 157 uint8_t EvaluatedValues = 0; | |
| 158 | |
| 159 lastvalue = surface_ring_mbar[surface_pressure_writeIndex]; | |
| 160 surface_pressure_stable_value = surface_ring_mbar[surface_pressure_writeIndex]; /* default: if no stable value is found return the oldest value */ | |
| 161 index = surface_pressure_writeIndex; | |
| 162 surface_pressure_stable = 1; | |
| 163 | |
| 164 if(index == 0) | |
| 165 { | |
| 166 index = PRESSURE_SURFACE_QUE - 1; | |
| 167 } | |
| 168 else | |
| 169 { | |
| 170 index = index - 1; | |
| 171 } | |
| 172 do | |
| 173 { | |
| 174 if((EvaluatedValues < EvaluationWindow) && | |
| 175 (fabs(surface_pressure_stable_value - surface_ring_mbar[index]) > PRESSURE_SURFACE_UNSTABLE_LIMIT)) /* unusual change during last 30 minutes */ | |
| 176 { | |
| 177 unstablecnt++; | |
| 178 if(unstablecnt > PRESSURE_SURFACE_DETECT_UNSTABLE_CNT) | |
| 179 { | |
| 180 surface_pressure_stable = 0; | |
| 181 } | |
| 182 } | |
| 183 /* search for a value which does not change for several iterations */ | |
| 184 if (fabs(lastvalue - surface_ring_mbar[index]) < PRESSURE_SURFACE_STABLE_LIMIT) | |
| 185 { | |
| 186 stablecnt++; | |
| 187 } | |
| 188 else | |
| 189 { | |
| 190 stablecnt = 0; | |
| 191 } | |
| 192 if ((stablecnt >= PRESSURE_SURFACE_DETECT_STABLE_CNT) && (surface_pressure_stable == 0)&&(surface_pressure_stable_value == surface_ring_mbar[surface_pressure_writeIndex])) /* pressure is unstable => search for new stable value */ | |
| 193 { | |
| 194 surface_pressure_stable_value = surface_ring_mbar[index]; | |
| 195 unstablecnt = 0; | |
| 196 } | |
| 197 | |
| 198 lastvalue = surface_ring_mbar[index]; | |
| 199 | |
| 200 if(index == 0) | |
| 201 { | |
| 202 index = PRESSURE_SURFACE_QUE - 1; | |
| 203 } | |
| 204 else | |
| 205 { | |
| 206 index = index - 1; | |
| 207 } | |
| 208 EvaluatedValues++; | |
| 209 } while (index != surface_pressure_writeIndex); | |
| 210 } | |
| 38 | 211 void update_surface_pressure(uint8_t call_rhythm_seconds) |
| 212 { | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
213 if(is_init_pressure_done()) |
|
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
214 { |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
215 runningAvg = (runningAvg * avgCount + ambient_pressure_mbar) / (avgCount +1); |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
216 avgCount++; |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
217 secondCounterSurfaceRing += call_rhythm_seconds; |
| 38 | 218 |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
219 if(secondCounterSurfaceRing >= 60) |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
220 { |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
221 if(runningAvg < PRESSURE_SURFACE_MAX_MBAR) |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
222 { |
| 352 | 223 surface_ring_mbar[surface_pressure_writeIndex] = runningAvg; |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
224 } |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
225 else |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
226 { |
| 352 | 227 surface_ring_mbar[surface_pressure_writeIndex] = PRESSURE_SURFACE_MAX_MBAR; |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
228 } |
| 352 | 229 surface_pressure_writeIndex++; /* the write index is now pointing to the oldest value in the buffer which will be overwritten next time */ |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
230 |
| 352 | 231 if(surface_pressure_writeIndex == PRESSURE_SURFACE_QUE) |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
232 { |
| 352 | 233 surface_pressure_writeIndex = 0; |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
234 } |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
235 |
| 352 | 236 surface_pressure_mbar = surface_ring_mbar[surface_pressure_writeIndex]; /* 30 minutes old measurement */ |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
237 |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
238 secondCounterSurfaceRing = 0; |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
239 avgCount = 1; /* use the current value as starting point but restart the weight decrement of the measurements */ |
|
858
08ea8e9d6cfe
Bugfix initialisation of surface pressure:
Ideenmodellierer
parents:
846
diff
changeset
|
240 |
|
08ea8e9d6cfe
Bugfix initialisation of surface pressure:
Ideenmodellierer
parents:
846
diff
changeset
|
241 evaluate_surface_pressure(); |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
242 } |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
243 } |
| 38 | 244 } |
| 245 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
246 #ifdef DEMOMODE |
| 38 | 247 float demo_modify_temperature_helper(float bottom_mbar_diff_to_surface) |
| 248 { | |
| 249 const float temperature_surface = 31.0; | |
| 250 const float temperature_bottom = 14.0; | |
| 251 | |
| 252 const float temperature_difference = temperature_bottom - temperature_surface; | |
| 253 | |
| 254 // range 0.0 - 1.0 | |
| 255 float position_now = (ambient_pressure_mbar - surface_pressure_mbar) / bottom_mbar_diff_to_surface; | |
| 256 | |
| 257 if(position_now <= 0) | |
| 258 return temperature_surface; | |
| 259 | |
| 260 if(position_now >= 1) | |
| 261 return temperature_bottom; | |
| 262 | |
| 263 return temperature_surface + (temperature_difference * position_now); | |
| 264 } | |
| 265 | |
| 266 | |
| 267 uint32_t demo_modify_temperature_and_pressure(int32_t divetime_in_seconds, uint8_t subseconds, float ceiling_mbar) | |
| 268 { | |
| 269 | |
| 270 const float descent_rate = 4000/60; | |
| 271 const float ascent_rate = 1000/60; | |
| 272 const uint32_t seconds_descend = (1 * 60) + 30; | |
| 273 const uint32_t turbo_seconds_at_bottom_start = (0 * 60) + 0; | |
| 274 const uint32_t seconds_descend_and_bottomtime = seconds_descend + turbo_seconds_at_bottom_start + (2 * 60) + 0; | |
| 275 uint32_t time_elapsed_in_seconds; | |
| 276 static float ambient_pressure_mbar_memory = 0; | |
| 277 static uint32_t time_last_call = 0; | |
| 278 | |
| 279 if(divetime_in_seconds <= seconds_descend) | |
| 280 { | |
| 281 ambient_pressure_mbar = (divetime_in_seconds * descent_rate) + ((float)(subseconds) * descent_rate) + surface_pressure_mbar; | |
| 282 ambient_temperature = demo_modify_temperature_helper(descent_rate * seconds_descend); | |
| 283 | |
| 284 time_last_call = divetime_in_seconds; | |
| 285 return 0; | |
| 286 } | |
| 287 else | |
| 288 if(divetime_in_seconds <= seconds_descend + turbo_seconds_at_bottom_start) | |
| 289 { | |
| 290 ambient_pressure_mbar = (seconds_descend * descent_rate) + surface_pressure_mbar; | |
| 291 ambient_temperature = demo_modify_temperature_helper(descent_rate * seconds_descend); | |
| 292 ambient_pressure_mbar_memory = ambient_pressure_mbar; | |
| 293 time_last_call = divetime_in_seconds; | |
| 294 return turbo_seconds_at_bottom_start; | |
| 295 } | |
| 296 else | |
| 297 if(divetime_in_seconds <= seconds_descend_and_bottomtime) | |
| 298 { | |
| 299 ambient_pressure_mbar = (seconds_descend * descent_rate) + surface_pressure_mbar; | |
| 300 ambient_temperature = demo_modify_temperature_helper(descent_rate * seconds_descend); | |
| 301 ambient_pressure_mbar_memory = ambient_pressure_mbar; | |
| 302 time_last_call = divetime_in_seconds; | |
| 303 return 0; | |
| 304 } | |
| 305 else | |
| 306 { | |
| 307 time_elapsed_in_seconds = divetime_in_seconds - time_last_call; | |
| 308 ambient_pressure_mbar = ambient_pressure_mbar_memory - time_elapsed_in_seconds * ascent_rate; | |
| 309 | |
| 310 if(ambient_pressure_mbar < surface_pressure_mbar) | |
| 311 ambient_pressure_mbar = surface_pressure_mbar; | |
| 312 else if(ambient_pressure_mbar < ceiling_mbar) | |
| 313 ambient_pressure_mbar = ceiling_mbar; | |
| 314 | |
| 315 ambient_temperature = demo_modify_temperature_helper(descent_rate * seconds_descend); | |
| 316 ambient_pressure_mbar_memory = ambient_pressure_mbar; | |
| 317 time_last_call = divetime_in_seconds; | |
| 318 return 0; | |
| 319 } | |
| 320 } | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
321 #endif |
| 38 | 322 |
| 323 uint8_t is_init_pressure_done(void) | |
| 324 { | |
| 325 return pressureSensorInitSuccess; | |
| 326 } | |
| 327 | |
| 328 uint8_t init_pressure(void) | |
| 329 { | |
| 330 uint8_t buffer[1]; | |
| 356 | 331 buffer[0] = 0x1E; // Reset Command |
| 38 | 332 uint8_t retValue = 0xFF; |
| 333 | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
334 pressureSensorInitSuccess = false; |
|
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
335 |
| 356 | 336 /* Probe new sensor first */ |
| 337 retValue = I2C_Master_Transmit( DEVICE_PRESSURE_MS5837, buffer, 1); | |
| 338 if(retValue != HAL_OK) | |
| 339 { | |
| 340 PRESSURE_ADDRESS = DEVICE_PRESSURE_MS5803; // use old sensor | |
| 341 HAL_Delay(100); | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
342 I2C_DeInit(); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
343 HAL_Delay(100); |
| 356 | 344 MX_I2C1_Init(); |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
345 HAL_Delay(100); |
| 356 | 346 } |
| 347 else | |
| 348 { | |
| 349 PRESSURE_ADDRESS = DEVICE_PRESSURE_MS5837; // Success, use new sensor | |
| 350 } | |
| 351 HAL_Delay(3); //2.8ms according to datasheet | |
| 352 | |
| 353 buffer[0] = 0x1E; // Reset Command | |
| 354 retValue = 0xFF; | |
| 355 | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
356 /* Send reset request to pressure sensor */ |
| 356 | 357 retValue = I2C_Master_Transmit( PRESSURE_ADDRESS, buffer, 1); |
| 38 | 358 if(retValue != HAL_OK) |
| 359 { | |
| 360 return (HAL_StatusTypeDef)retValue; | |
| 361 } | |
| 356 | 362 HAL_Delay(3); //2.8ms according to datasheet |
| 38 | 363 |
| 356 | 364 for(uint8_t i=0;i<7;i++) |
| 38 | 365 { |
| 366 C[i] = get_ci_by_coef_num(i); | |
| 367 } | |
| 356 | 368 // n_crc = crc4(C); // no evaluation at the moment hw 151026 |
| 38 | 369 |
|
241
2b9775f71e30
cleanup: factor out I2C1_Status() and cleanup type
Jan Mulder <jlmulder@xs4all.nl>
parents:
186
diff
changeset
|
370 if(global.I2C_SystemStatus == HAL_OK) |
| 38 | 371 { |
| 372 pressureSensorInitSuccess = 1; | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
373 retValue = pressure_update(); |
| 38 | 374 } |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
375 return retValue; |
| 38 | 376 } |
| 377 | |
| 378 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
379 static uint32_t get_adc(void) |
| 38 | 380 { |
| 381 uint8_t buffer[1]; | |
| 382 uint8_t resivebuf[4]; | |
|
474
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
383 uint32_t answer = 0xFFFFFFFF; |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
384 |
| 38 | 385 buffer[0] = 0x00; // Get ADC |
|
474
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
386 if(I2C_Master_Transmit( PRESSURE_ADDRESS, buffer, 1) == HAL_OK) |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
387 { |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
388 if(I2C_Master_Receive( PRESSURE_ADDRESS, resivebuf, 4) == HAL_OK) |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
389 { |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
390 resivebuf[3] = 0; |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
391 answer = 256*256 *(uint32_t)resivebuf[0] + 256 * (uint32_t)resivebuf[1] + (uint32_t)resivebuf[2]; |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
392 } |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
393 } |
| 38 | 394 return answer; |
| 395 } | |
| 396 | |
| 397 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
398 static uint16_t get_ci_by_coef_num(uint8_t coef_num) |
| 38 | 399 { |
| 400 uint8_t resivebuf[2]; | |
| 401 | |
| 402 uint8_t cmd = CMD_PROM_RD+coef_num*2; | |
| 356 | 403 I2C_Master_Transmit( PRESSURE_ADDRESS, &cmd, 1); |
| 404 I2C_Master_Receive( PRESSURE_ADDRESS, resivebuf, 2); | |
| 38 | 405 return (256*(uint16_t)resivebuf[0]) + (uint16_t)resivebuf[1]; |
| 406 } | |
| 407 | |
| 408 | |
| 409 | |
| 410 uint8_t pressure_update(void) | |
| 411 { | |
| 412 HAL_StatusTypeDef statusReturn = HAL_TIMEOUT; | |
| 413 | |
| 414 statusReturn = pressure_sensor_get_data(); | |
| 415 pressure_calculation(); | |
| 416 return (uint8_t)statusReturn; | |
| 417 } | |
| 418 | |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
419 /* Switch between pressure and temperature measurement with every successful read operation */ |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
420 void pressure_update_alternating(void) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
421 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
422 static uint8_t getTemperature= 0; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
423 |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
424 if(getTemperature) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
425 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
426 if(pressure_sensor_get_temperature_raw() == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
427 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
428 getTemperature = 0; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
429 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
430 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
431 else |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
432 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
433 if(pressure_sensor_get_pressure_raw() == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
434 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
435 getTemperature = 1; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
436 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
437 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
438 pressure_calculation(); |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
439 return; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
440 } |
| 38 | 441 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
442 static uint32_t pressure_sensor_get_one_value(uint8_t cmd, HAL_StatusTypeDef *statusReturn) |
| 38 | 443 { |
| 444 uint8_t command = CMD_ADC_CONV + cmd; | |
|
474
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
445 uint32_t adcValue = 0; |
| 38 | 446 HAL_StatusTypeDef statusReturnTemp = HAL_TIMEOUT; |
| 447 | |
| 356 | 448 statusReturnTemp = I2C_Master_Transmit( PRESSURE_ADDRESS, &command, 1); |
| 38 | 449 |
| 450 if(statusReturn) | |
| 451 { | |
| 452 *statusReturn = statusReturnTemp; | |
| 453 } | |
| 479 | 454 |
| 455 switch (cmd & 0x0f) // wait necessary conversion time | |
| 38 | 456 { |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
457 case CMD_ADC_256 : HAL_Delay(2); break; |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
458 case CMD_ADC_512 : HAL_Delay(4); break; |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
459 case CMD_ADC_1024: HAL_Delay(5); break; |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
460 case CMD_ADC_2048: HAL_Delay(7); break; |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
461 case CMD_ADC_4096: HAL_Delay(11); break; |
| 479 | 462 default: |
| 463 break; | |
| 464 } | |
| 465 adcValue = get_adc(); | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
466 /* if(adcValue == 0xFFFFFFFF) |
| 479 | 467 { |
| 468 if(statusReturn) | |
|
474
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
469 { |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
470 *statusReturn = HAL_ERROR; |
|
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
471 } |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
472 }*/ |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
473 |
|
474
4be72d55b09a
Added error detection for reading of ADC values in sleep mode:
ideenmodellierer
parents:
403
diff
changeset
|
474 return adcValue; |
| 38 | 475 } |
| 476 | |
| 477 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
478 static HAL_StatusTypeDef pressure_sensor_get_data(void) |
| 38 | 479 { |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
480 uint32_t requestedValue = 0; |
| 38 | 481 HAL_StatusTypeDef statusReturn1 = HAL_TIMEOUT; |
| 482 HAL_StatusTypeDef statusReturn2 = HAL_TIMEOUT; | |
| 483 | |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
484 |
| 38 | 485 |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
486 requestedValue = pressure_sensor_get_one_value(CMD_ADC_D2 + CMD_ADC_4096, &statusReturn2); |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
487 if (statusReturn2 == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
488 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
489 D2 = requestedValue; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
490 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
491 |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
492 requestedValue = pressure_sensor_get_one_value(CMD_ADC_D1 + CMD_ADC_4096, &statusReturn1); |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
493 if (statusReturn1 == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
494 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
495 D1 = requestedValue; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
496 } |
| 38 | 497 if(statusReturn2 > statusReturn1) // if anything is not HAL_OK (0x00) or worse |
| 498 return statusReturn2; | |
| 499 else | |
| 500 return statusReturn1; | |
| 501 } | |
| 502 | |
| 503 | |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
504 HAL_StatusTypeDef pressure_sensor_get_pressure_raw(void) |
| 38 | 505 { |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
506 uint32_t requestedValue = 0; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
507 HAL_StatusTypeDef statusReturn = HAL_TIMEOUT; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
508 |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
509 requestedValue = pressure_sensor_get_one_value(CMD_ADC_D1 + CMD_ADC_4096, &statusReturn); |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
510 if (statusReturn == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
511 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
512 D1 = requestedValue; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
513 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
514 |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
515 return statusReturn; |
| 38 | 516 } |
| 517 | |
| 518 | |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
519 HAL_StatusTypeDef pressure_sensor_get_temperature_raw(void) |
| 38 | 520 { |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
521 uint32_t requestedValue = 0; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
522 HAL_StatusTypeDef statusReturn = HAL_TIMEOUT; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
523 |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
480
diff
changeset
|
524 requestedValue = pressure_sensor_get_one_value(CMD_ADC_D2 + CMD_ADC_4096, &statusReturn); |
|
276
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
525 if (statusReturn == HAL_OK) |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
526 { |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
527 D2 = requestedValue; |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
528 } |
|
8e9c502c0b06
Rework pressure/ temperature data aquisition
ideenmodellierer
parents:
241
diff
changeset
|
529 return statusReturn; |
| 38 | 530 } |
| 531 | |
| 532 | |
| 352 | 533 #ifdef SIMULATE_PRESSURE |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
534 |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
535 #define SECDIV 10 /* update every 100ms */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
536 |
| 352 | 537 void pressure_simulation() |
| 538 { | |
| 539 static uint32_t tickstart = 0; | |
| 540 static float pressure_sim_mbar = 0; | |
| 541 static uint32_t passedSecond = 0; | |
| 542 static uint32_t secondtick = 0; | |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
543 static uint32_t lastsecondtick = 0; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
544 static float delta_mbar = 0.0; |
| 352 | 545 |
| 546 uint32_t lasttick = 0; | |
| 547 | |
| 548 | |
| 549 | |
| 550 if( tickstart == 0) | |
| 551 { | |
| 552 tickstart = HAL_GetTick(); /* init time stamp */ | |
| 553 secondtick = tickstart; | |
| 554 pressure_sim_mbar = 1000; | |
| 555 } | |
| 556 | |
| 557 lasttick = HAL_GetTick(); | |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
558 if(time_elapsed_ms(secondtick,lasttick) >= (1000 / SECDIV)) /* one second passed since last tick */ |
| 352 | 559 { |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
560 if(time_elapsed_ms(lastsecondtick,lasttick) > 1000) |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
561 { |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
562 passedSecond++; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
563 lastsecondtick = lasttick; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
564 } |
| 352 | 565 secondtick = lasttick; |
| 566 | |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
567 #define DIVE_AT_SPEED 1 |
| 352 | 568 #ifdef DIVE_AFTER_LANDING |
| 569 if(passedSecond < 10) pressure_sim_mbar = 1000.0; /* stay stable for 10 seconds */ | |
| 570 else if(passedSecond < 300) pressure_sim_mbar -= 1.0; /* decrease pressure in 5 minutes target 770mbar => delta 330 */ | |
| 571 else if(passedSecond < 900) pressure_sim_mbar += 0.0; /*stay stable 10 minutes*/ | |
| 572 else if(passedSecond < 1500) pressure_sim_mbar += 0.5; /* return to 1 bar in 10 Minutes*/ | |
| 573 else if(passedSecond < 1800) pressure_sim_mbar += 0.0; /* 5 minutes break */ | |
| 574 else if(passedSecond < 2000) pressure_sim_mbar += 10.0; /* start dive */ | |
| 575 else if(passedSecond < 2300) pressure_sim_mbar += 0.0; /* stay on depth */ | |
| 576 else if(passedSecond < 2500) pressure_sim_mbar -= 10.0; /* return to surface */ | |
| 577 else pressure_sim_mbar = 1000.0; /* final state */ | |
|
867
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
578 #endif |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
579 #ifdef DIVE_AT_SPEED |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
580 if(passedSecond < 10) pressure_sim_mbar = 1000.0; /* stay stable for 10 seconds */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
581 else if(passedSecond < 20) delta_mbar = 200.0 / SECDIV; /* Start dive */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
582 else if(passedSecond < 30) delta_mbar = 0.0; /*stay on depth*/ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
583 else if(passedSecond < 45) delta_mbar -= 0.2 / SECDIV; /* return to surface */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
584 else if(passedSecond < 40) delta_mbar -= 0.4 / SECDIV; /* stay */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
585 else if(passedSecond < 50) delta_mbar += 0.3 / SECDIV; /* get ready for second dive */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
586 else if(passedSecond < 60) delta_mbar -= 0.4; /*stay on depth*/ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
587 else if(passedSecond < 70) delta_mbar = 0.2; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
588 else if(passedSecond < 1060) pressure_sim_mbar -= 10.0/ SECDIV; /* return to surface */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
589 else if(passedSecond < 1200) pressure_sim_mbar += 0.0; /* stay */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
590 else { pressure_sim_mbar = 1000.0; delta_mbar = 0.0;} /* final state */ |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
591 |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
592 pressure_sim_mbar += delta_mbar; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
593 if(pressure_sim_mbar < surface_pressure_mbar) |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
594 { |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
595 pressure_sim_mbar = surface_pressure_mbar; |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
596 } |
|
3311b720a072
Decrease calculation interval for ascend speed:
Ideenmodellierer
parents:
858
diff
changeset
|
597 |
| 352 | 598 #else /* short dive */ |
| 599 if(passedSecond < 10) pressure_sim_mbar = 1000.0; /* stay stable for 10 seconds */ | |
| 600 else if(passedSecond < 180) pressure_sim_mbar += 10.0; /* Start dive */ | |
| 601 else if(passedSecond < 300) pressure_sim_mbar += 0.0; /*stay on depth*/ | |
| 602 else if(passedSecond < 460) pressure_sim_mbar -= 10.0; /* return to surface */ | |
| 603 else if(passedSecond < 600) pressure_sim_mbar += 0.0; /* stay */ | |
| 604 else if(passedSecond < 610) pressure_sim_mbar = 1000.0; /* get ready for second dive */ | |
| 605 else if(passedSecond < 780) pressure_sim_mbar += 10.0; /* Start dive */ | |
| 606 else if(passedSecond < 900) pressure_sim_mbar += 0.0; /*stay on depth*/ | |
| 607 else if(passedSecond < 1060) pressure_sim_mbar -= 10.0; /* return to surface */ | |
| 608 else if(passedSecond < 1200) pressure_sim_mbar += 0.0; /* stay */ | |
| 609 else pressure_sim_mbar = 1000.0; /* final state */ | |
| 610 #endif | |
| 611 } | |
| 612 | |
| 613 | |
| 614 ambient_pressure_mbar = pressure_sim_mbar; | |
| 615 ambient_temperature = 25.0; | |
| 616 return; | |
| 617 } | |
| 618 | |
| 619 #endif | |
| 620 | |
| 38 | 621 void pressure_calculation(void) |
| 622 { | |
|
241
2b9775f71e30
cleanup: factor out I2C1_Status() and cleanup type
Jan Mulder <jlmulder@xs4all.nl>
parents:
186
diff
changeset
|
623 if(global.I2C_SystemStatus != HAL_OK) |
| 38 | 624 return; |
| 352 | 625 |
| 626 #ifdef SIMULATE_PRESSURE | |
| 627 pressure_simulation(); | |
| 628 #else | |
| 38 | 629 pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015(); |
| 352 | 630 #endif |
| 38 | 631 } |
| 632 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
633 static void pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015(void) |
| 38 | 634 { |
|
335
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
635 static float runningAvg = 0; |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
636 static uint8_t avgCnt = 0; |
|
c11ce8c885d3
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
ideenmodellierer
parents:
331
diff
changeset
|
637 |
| 38 | 638 uint32_t local_D1; // ADC value of the pressure conversion |
| 639 uint32_t local_D2; // ADC value of the temperature conversion | |
| 640 int32_t local_Px10; // compensated pressure value | |
| 641 int32_t local_Tx100; // compensated temperature value | |
| 642 int64_t local_dT; // int32_t, difference between actual and measured temperature | |
| 643 int64_t local_OFF; // offset at actual temperature | |
| 644 int64_t local_SENS; // sensitivity at actual temperature | |
| 645 | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
646 float calc_pressure; |
|
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
647 |
| 38 | 648 int64_t T2; |
| 649 int64_t OFF2; | |
| 650 int64_t SENS2; | |
| 651 | |
| 652 local_D1 = D1; | |
| 653 local_D2 = D2; | |
| 654 | |
| 655 local_dT = ((int64_t)local_D2) - ((int64_t)C[5]) * 256; //pow(2,8); | |
| 656 local_OFF = ((int64_t)C[2]) * 65536 + local_dT * ((int64_t)C[4]) / 128; // pow(2,16), pow(2,7) | |
| 657 local_SENS = ((int64_t)C[1]) * 32768 + local_dT * ((int64_t)C[3]) / 256; // pow(2,15), pow(2,8) | |
| 658 | |
| 659 local_Tx100 = (int32_t)(2000 + (local_dT * ((int64_t)C[6])) / 8388608);// pow(2,23) | |
| 660 | |
| 661 | |
| 662 if(local_Tx100 < 2000) // low temperature | |
| 663 { | |
| 664 T2 = 3 * local_dT; | |
| 665 T2 *= local_dT; | |
| 666 T2 /= 8589934592; | |
| 667 | |
| 668 OFF2 = ((int64_t)local_Tx100) - 2000; | |
| 669 OFF2 *= OFF2; | |
| 670 OFF2 *= 3; | |
| 671 OFF2 /= 2; | |
| 672 | |
| 673 SENS2 = ((int64_t)local_Tx100) - 2000; | |
| 674 SENS2 *= SENS2; | |
| 675 SENS2 *= 5; | |
| 676 SENS2 /= 8; | |
| 677 | |
| 678 local_Tx100 -= (int32_t)T2; | |
| 679 local_OFF -= OFF2; | |
| 680 local_SENS -= SENS2; | |
| 681 } | |
| 682 else | |
| 683 { | |
| 684 T2 = 7 * local_dT; | |
| 685 T2 *= local_dT; | |
| 686 T2 /= 137438953472; | |
| 687 | |
| 688 OFF2 = ((int64_t)local_Tx100) - 2000; | |
| 689 OFF2 *= OFF2; | |
| 690 OFF2 /= 16; | |
| 691 | |
| 692 local_Tx100 -= (int32_t)T2; | |
| 693 local_OFF -= OFF2; | |
| 694 } | |
| 695 | |
| 696 local_Px10 = (int32_t)( | |
| 697 (((int64_t)((local_D1 * local_SENS) / 2097152)) - local_OFF) | |
| 698 / 8192 );// )) / 10; // pow(2,21), pow(2,13) | |
| 699 | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
700 ambient_temperature = ((float)local_Tx100) / 100; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
701 ambient_temperature += temperature_offset; |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
702 |
|
688
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
703 if(ambient_temperature < TEMPERATURE_MINIMUM) |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
704 { |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
705 ambient_temperature = 20.0; |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
706 } |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
707 |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
708 calc_pressure = ((float)local_Px10) / 10; |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
709 calc_pressure += pressure_offset; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
710 |
| 480 | 711 runningAvg = (avgCnt * runningAvg + calc_pressure) / (avgCnt + 1); |
| 712 if (avgCnt < 10) /* build an average considering the last measurements to have a weight "1 of 10" */ | |
| 713 { /* Main reason for this is the jitter of up to +-10 HPa in surface mode which is caused */ | |
| 714 avgCnt++; /* by the measurement range of the sensor which is focused on under water pressure measurement */ | |
|
331
b4c578caaafb
Added plausibility check for pressure values
ideenmodellierer
parents:
276
diff
changeset
|
715 } |
| 480 | 716 ambient_pressure_mbar = runningAvg; |
|
688
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
717 |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
718 if(ambient_pressure_mbar < PRESSURE_MINIMUM) |
|
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
719 { |
|
846
2ace67231c49
Consider pressure offset compensation in case of setting a default value:
Ideenmodellierer
parents:
688
diff
changeset
|
720 ambient_pressure_mbar = 1000.0 + pressure_offset; |
|
688
8c92f7743e14
Added sanity check for temperature and pressure values:
Ideenmodellierer
parents:
579
diff
changeset
|
721 } |
| 38 | 722 } |
| 723 | |
| 724 | |
| 725 /* taken from AN520 by meas-spec.com dated 9. Aug. 2011 | |
| 726 * short and int are both 16bit according to AVR/GCC google results | |
| 727 */ | |
| 356 | 728 /*static uint8_t crc4(uint16_t n_prom[]) |
| 38 | 729 { |
| 730 uint16_t cnt; // simple counter | |
| 731 uint16_t n_rem; // crc reminder | |
| 732 uint16_t crc_read; // original value of the crc | |
| 733 uint8_t n_bit; | |
| 734 n_rem = 0x00; | |
| 735 crc_read=n_prom[7]; //save read CRC | |
| 736 n_prom[7]=(0xFF00 & (n_prom[7])); //CRC byte is replaced by 0 | |
| 737 for (cnt = 0; cnt < 16; cnt++) // operation is performed on bytes | |
| 738 { // choose LSB or MSB | |
| 739 if (cnt%2==1) n_rem ^= (uint16_t) ((n_prom[cnt>>1]) & 0x00FF); | |
| 740 else n_rem ^= (uint16_t) (n_prom[cnt>>1]>>8); | |
| 741 for (n_bit = 8; n_bit > 0; n_bit--) | |
| 742 { | |
| 743 if (n_rem & (0x8000)) | |
| 744 { | |
| 745 n_rem = (n_rem << 1) ^ 0x3000; | |
| 746 } | |
| 747 else | |
| 748 { | |
| 749 n_rem = (n_rem << 1); | |
| 750 } | |
| 751 } | |
| 752 } | |
| 753 n_rem= (0x000F & (n_rem >> 12)); // // final 4-bit reminder is CRC code | |
| 754 n_prom[7]=crc_read; // restore the crc_read to its original place | |
| 755 return (n_rem ^ 0x00); | |
| 756 } | |
| 356 | 757 |
| 38 | 758 void test_calculation(void) |
| 759 { | |
| 760 C1 = 29112; | |
| 761 C2 = 26814; | |
| 762 C3 = 19125; | |
| 763 C4 = 17865; | |
| 764 C5 = 32057; | |
| 765 C6 = 31305; | |
| 766 | |
| 767 C2_x_2p16 = C2 * 65536; | |
| 768 C1_x_2p15 = C1 * 32768; | |
| 769 | |
| 770 D1 = 4944364; | |
| 771 D2 = 8198974; | |
| 772 pressure_calculation() ; | |
| 773 }; | |
| 774 */ | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
775 void pressure_set_offset (float pressureOffset, float temperatureOffset) |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
776 { |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
777 if(pressure_offset != pressureOffset) /* we received a new value => reinit surface que */ |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
778 { |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
779 ambient_pressure_mbar -= pressure_offset; /* revert old value */ |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
780 ambient_pressure_mbar += pressureOffset; /* apply new offset */ |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
781 init_surface_ring(1); |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
782 } |
| 38 | 783 |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
784 pressure_offset = pressureOffset; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
785 temperature_offset = temperatureOffset; |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
786 } |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
787 |
|
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
335
diff
changeset
|
788 |