ostc4: Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal

annotate Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h @ 850:bc2fcd002fc4 Evo_2_23

Check line enable/disable state when a new page is selected: Some lines may change the enable/disable state based on events which are triggered from outside the page scope (for example sensor setup). Updating the line states while another page is active caused problems in the framebuffer handling. To solve this usecase the conditions for the line dis/enabling is checked when a "nextPage" is selected. If condition changed then the page will be refreshed.

author	Ideenmodellierer
date	Fri, 01 Mar 2024 19:30:29 +0100
parents	c78bcbd5deda
children

rev	line source
128 c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	1 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	2 ******************************************************************************
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	3 * @file stm32f4xx_hal_uart.h
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	4 * @author MCD Application Team
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	5 * @brief Header file of UART HAL module.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	6 ******************************************************************************
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	7 * @attention
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	8 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	9 * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	10 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	11 * Redistribution and use in source and binary forms, with or without modification,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	12 * are permitted provided that the following conditions are met:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	13 * 1. Redistributions of source code must retain the above copyright notice,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	14 * this list of conditions and the following disclaimer.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	15 * 2. Redistributions in binary form must reproduce the above copyright notice,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	16 * this list of conditions and the following disclaimer in the documentation
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	17 * and/or other materials provided with the distribution.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	18 * 3. Neither the name of STMicroelectronics nor the names of its contributors
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	19 * may be used to endorse or promote products derived from this software
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	20 * without specific prior written permission.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	21 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	25 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	29 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	32 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	33 ******************************************************************************
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	34 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	35
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	36 /* Define to prevent recursive inclusion -------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	37 #ifndef __STM32F4xx_HAL_UART_H
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	38 #define __STM32F4xx_HAL_UART_H
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	39
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	40 #ifdef __cplusplus
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	41 extern "C" {
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	42 #endif
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	43
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	44 /* Includes ------------------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	45 #include "stm32f4xx_hal_def.h"
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	46
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	47 /** @addtogroup STM32F4xx_HAL_Driver
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	48 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	49 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	50
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	51 /** @addtogroup UART
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	52 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	53 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	54
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	55 /* Exported types ------------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	56 /** @defgroup UART_Exported_Types UART Exported Types
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	57 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	58 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	59
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	60 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	61 * @brief UART Init Structure definition
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	62 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	63 typedef struct
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	64 {
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	65 uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	66 The baud rate is computed using the following formula:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	67 - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	68 - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	69 Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	70
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	71 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	72 This parameter can be a value of @ref UART_Word_Length */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	73
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	74 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	75 This parameter can be a value of @ref UART_Stop_Bits */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	76
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	77 uint32_t Parity; /*!< Specifies the parity mode.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	78 This parameter can be a value of @ref UART_Parity
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	79 @note When parity is enabled, the computed parity is inserted
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	80 at the MSB position of the transmitted data (9th bit when
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	81 the word length is set to 9 data bits; 8th bit when the
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	82 word length is set to 8 data bits). */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	83
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	84 uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	85 This parameter can be a value of @ref UART_Mode */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	86
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	87 uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	88 or disabled.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	89 This parameter can be a value of @ref UART_Hardware_Flow_Control */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	90
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	91 uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	92 This parameter can be a value of @ref UART_Over_Sampling */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	93 }UART_InitTypeDef;
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	94
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	95 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	96 * @brief HAL UART State structures definition
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	97 * @note HAL UART State value is a combination of 2 different substates: gState and RxState.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	98 * - gState contains UART state information related to global Handle management
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	99 * and also information related to Tx operations.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	100 * gState value coding follow below described bitmap :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	101 * b7-b6 Error information
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	102 * 00 : No Error
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	103 * 01 : (Not Used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	104 * 10 : Timeout
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	105 * 11 : Error
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	106 * b5 IP initilisation status
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	107 * 0 : Reset (IP not initialized)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	108 * 1 : Init done (IP not initialized. HAL UART Init function already called)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	109 * b4-b3 (not used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	110 * xx : Should be set to 00
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	111 * b2 Intrinsic process state
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	112 * 0 : Ready
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	113 * 1 : Busy (IP busy with some configuration or internal operations)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	114 * b1 (not used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	115 * x : Should be set to 0
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	116 * b0 Tx state
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	117 * 0 : Ready (no Tx operation ongoing)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	118 * 1 : Busy (Tx operation ongoing)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	119 * - RxState contains information related to Rx operations.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	120 * RxState value coding follow below described bitmap :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	121 * b7-b6 (not used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	122 * xx : Should be set to 00
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	123 * b5 IP initilisation status
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	124 * 0 : Reset (IP not initialized)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	125 * 1 : Init done (IP not initialized)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	126 * b4-b2 (not used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	127 * xxx : Should be set to 000
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	128 * b1 Rx state
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	129 * 0 : Ready (no Rx operation ongoing)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	130 * 1 : Busy (Rx operation ongoing)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	131 * b0 (not used)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	132 * x : Should be set to 0.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	133 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	134 typedef enum
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	135 {
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	136 HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	137 Value is allowed for gState and RxState */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	138 HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	139 Value is allowed for gState and RxState */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	140 HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	141 Value is allowed for gState only */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	142 HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	143 Value is allowed for gState only */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	144 HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	145 Value is allowed for RxState only */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	146 HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	147 Not to be used for neither gState nor RxState.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	148 Value is result of combination (Or) between gState and RxState values */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	149 HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	150 Value is allowed for gState only */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	151 HAL_UART_STATE_ERROR = 0xE0U /*!< Error
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	152 Value is allowed for gState only */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	153 }HAL_UART_StateTypeDef;
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	154
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	155 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	156 * @brief UART handle Structure definition
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	157 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	158 typedef struct
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	159 {
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	160 USART_TypeDef Instance; /!< UART registers base address */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	161
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	162 UART_InitTypeDef Init; /!< UART communication parameters /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	163
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	164 uint8_t pTxBuffPtr; /!< Pointer to UART Tx transfer Buffer */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	165
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	166 uint16_t TxXferSize; /!< UART Tx Transfer size /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	167
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	168 __IO uint16_t TxXferCount; /!< UART Tx Transfer Counter /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	169
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	170 uint8_t pRxBuffPtr; /!< Pointer to UART Rx transfer Buffer */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	171
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	172 uint16_t RxXferSize; /!< UART Rx Transfer size /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	173
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	174 __IO uint16_t RxXferCount; /!< UART Rx Transfer Counter /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	175
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	176 DMA_HandleTypeDef hdmatx; /!< UART Tx DMA Handle parameters */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	177
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	178 DMA_HandleTypeDef hdmarx; /!< UART Rx DMA Handle parameters */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	179
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	180 HAL_LockTypeDef Lock; /!< Locking object /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	181
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	182 __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	183 and also related to Tx operations.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	184 This parameter can be a value of @ref HAL_UART_StateTypeDef */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	185
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	186 __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	187 This parameter can be a value of @ref HAL_UART_StateTypeDef */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	188
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	189 __IO uint32_t ErrorCode; /!< UART Error code /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	190
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	191 }UART_HandleTypeDef;
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	192 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	193 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	194 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	195
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	196 /* Exported constants --------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	197 /** @defgroup UART_Exported_Constants UART Exported constants
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	198 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	199 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	200
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	201 /** @defgroup UART_Error_Code UART Error Code
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	202 * @brief UART Error Code
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	203 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	204 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	205 #define HAL_UART_ERROR_NONE 0x00000000U /!< No error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	206 #define HAL_UART_ERROR_PE 0x00000001U /!< Parity error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	207 #define HAL_UART_ERROR_NE 0x00000002U /!< Noise error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	208 #define HAL_UART_ERROR_FE 0x00000004U /!< Frame error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	209 #define HAL_UART_ERROR_ORE 0x00000008U /!< Overrun error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	210 #define HAL_UART_ERROR_DMA 0x00000010U /!< DMA transfer error /
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	211 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	212 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	213 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	214
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	215 /** @defgroup UART_Word_Length UART Word Length
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	216 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	217 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	218 #define UART_WORDLENGTH_8B 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	219 #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	220 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	221 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	222 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	223
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	224 /** @defgroup UART_Stop_Bits UART Number of Stop Bits
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	225 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	226 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	227 #define UART_STOPBITS_1 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	228 #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	229 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	230 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	231 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	232
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	233 /** @defgroup UART_Parity UART Parity
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	234 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	235 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	236 #define UART_PARITY_NONE 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	237 #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	238 #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	239 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	240 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	241 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	242
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	243 /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	244 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	245 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	246 #define UART_HWCONTROL_NONE 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	247 #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	248 #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	249 #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE \| USART_CR3_CTSE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	250 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	251 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	252 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	253
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	254 /** @defgroup UART_Mode UART Transfer Mode
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	255 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	256 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	257 #define UART_MODE_RX ((uint32_t)USART_CR1_RE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	258 #define UART_MODE_TX ((uint32_t)USART_CR1_TE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	259 #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	260 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	261 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	262 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	263
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	264 /** @defgroup UART_State UART State
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	265 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	266 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	267 #define UART_STATE_DISABLE 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	268 #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	269 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	270 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	271 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	272
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	273 /** @defgroup UART_Over_Sampling UART Over Sampling
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	274 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	275 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	276 #define UART_OVERSAMPLING_16 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	277 #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	278 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	279 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	280 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	281
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	282 /** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	283 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	284 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	285 #define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	286 #define UART_LINBREAKDETECTLENGTH_11B 0x00000020U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	287 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	288 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	289 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	290
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	291 /** @defgroup UART_WakeUp_functions UART Wakeup Functions
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	292 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	293 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	294 #define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	295 #define UART_WAKEUPMETHOD_ADDRESSMARK 0x00000800U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	296 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	297 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	298 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	299
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	300 /** @defgroup UART_Flags UART FLags
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	301 * Elements values convention: 0xXXXX
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	302 * - 0xXXXX : Flag mask in the SR register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	303 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	304 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	305 #define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	306 #define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	307 #define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	308 #define UART_FLAG_TC ((uint32_t)USART_SR_TC)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	309 #define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	310 #define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	311 #define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	312 #define UART_FLAG_NE ((uint32_t)USART_SR_NE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	313 #define UART_FLAG_FE ((uint32_t)USART_SR_FE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	314 #define UART_FLAG_PE ((uint32_t)USART_SR_PE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	315 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	316 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	317 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	318
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	319 /** @defgroup UART_Interrupt_definition UART Interrupt Definitions
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	320 * Elements values convention: 0xY000XXXX
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	321 * - XXXX : Interrupt mask (16 bits) in the Y register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	322 * - Y : Interrupt source register (2bits)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	323 * - 0001: CR1 register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	324 * - 0010: CR2 register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	325 * - 0011: CR3 register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	326 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	327 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	328 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	329
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	330 #define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U \| USART_CR1_PEIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	331 #define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U \| USART_CR1_TXEIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	332 #define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U \| USART_CR1_TCIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	333 #define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U \| USART_CR1_RXNEIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	334 #define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U \| USART_CR1_IDLEIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	335
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	336 #define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U \| USART_CR2_LBDIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	337
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	338 #define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U \| USART_CR3_CTSIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	339 #define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U \| USART_CR3_EIE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	340 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	341 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	342 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	343
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	344 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	345 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	346 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	347
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	348 /* Exported macro ------------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	349 /** @defgroup UART_Exported_Macros UART Exported Macros
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	350 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	351 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	352
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	353 /** @brief Reset UART handle gstate & RxState
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	354 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	355 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	356 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	357 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	358 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	359 #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	360 (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	361 (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	362 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	363
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	364 /** @brief Flushes the UART DR register
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	365 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	366 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	367 #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	368
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	369 /** @brief Checks whether the specified UART flag is set or not.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	370 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	371 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	372 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	373 * @param __FLAG__ specifies the flag to check.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	374 * This parameter can be one of the following values:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	375 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	376 * @arg UART_FLAG_LBD: LIN Break detection flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	377 * @arg UART_FLAG_TXE: Transmit data register empty flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	378 * @arg UART_FLAG_TC: Transmission Complete flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	379 * @arg UART_FLAG_RXNE: Receive data register not empty flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	380 * @arg UART_FLAG_IDLE: Idle Line detection flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	381 * @arg UART_FLAG_ORE: Overrun Error flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	382 * @arg UART_FLAG_NE: Noise Error flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	383 * @arg UART_FLAG_FE: Framing Error flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	384 * @arg UART_FLAG_PE: Parity Error flag
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	385 * @retval The new state of __FLAG__ (TRUE or FALSE).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	386 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	387
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	388 #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	389
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	390 /** @brief Clears the specified UART pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	391 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	392 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	393 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	394 * @param __FLAG__ specifies the flag to check.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	395 * This parameter can be any combination of the following values:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	396 * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	397 * @arg UART_FLAG_LBD: LIN Break detection flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	398 * @arg UART_FLAG_TC: Transmission Complete flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	399 * @arg UART_FLAG_RXNE: Receive data register not empty flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	400 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	401 * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	402 * error) and IDLE (Idle line detected) flags are cleared by software
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	403 * sequence: a read operation to USART_SR register followed by a read
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	404 * operation to USART_DR register.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	405 * @note RXNE flag can be also cleared by a read to the USART_DR register.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	406 * @note TC flag can be also cleared by software sequence: a read operation to
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	407 * USART_SR register followed by a write operation to USART_DR register.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	408 * @note TXE flag is cleared only by a write to the USART_DR register.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	409 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	410 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	411 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	412 #define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	413
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	414 /** @brief Clear the UART PE pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	415 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	416 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	417 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	418 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	419 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	420 #define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	421 do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	422 __IO uint32_t tmpreg = 0x00U; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	423 tmpreg = (__HANDLE__)->Instance->SR; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	424 tmpreg = (__HANDLE__)->Instance->DR; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	425 UNUSED(tmpreg); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	426 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	427
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	428 /** @brief Clear the UART FE pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	429 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	430 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	431 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	432 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	433 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	434 #define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	435
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	436 /** @brief Clear the UART NE pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	437 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	438 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	439 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	440 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	441 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	442 #define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	443
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	444 /** @brief Clear the UART ORE pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	445 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	446 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	447 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	448 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	449 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	450 #define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	451
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	452 /** @brief Clear the UART IDLE pending flag.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	453 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	454 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	455 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	456 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	457 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	458 #define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	459
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	460 /** @brief Enable the specified UART interrupt.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	461 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	462 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	463 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	464 * @param __INTERRUPT__ specifies the UART interrupt source to enable.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	465 * This parameter can be one of the following values:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	466 * @arg UART_IT_CTS: CTS change interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	467 * @arg UART_IT_LBD: LIN Break detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	468 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	469 * @arg UART_IT_TC: Transmission complete interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	470 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	471 * @arg UART_IT_IDLE: Idle line detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	472 * @arg UART_IT_PE: Parity Error interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	473 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	474 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	475 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	476 #define UART_IT_MASK 0x0000FFFFU
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	477 #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 \|= ((__INTERRUPT__) & UART_IT_MASK)): \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	478 (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 \|= ((__INTERRUPT__) & UART_IT_MASK)): \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	479 ((__HANDLE__)->Instance->CR3 \|= ((__INTERRUPT__) & UART_IT_MASK)))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	480 /** @brief Disable the specified UART interrupt.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	481 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	482 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	483 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	484 * @param __INTERRUPT__ specifies the UART interrupt source to disable.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	485 * This parameter can be one of the following values:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	486 * @arg UART_IT_CTS: CTS change interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	487 * @arg UART_IT_LBD: LIN Break detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	488 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	489 * @arg UART_IT_TC: Transmission complete interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	490 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	491 * @arg UART_IT_IDLE: Idle line detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	492 * @arg UART_IT_PE: Parity Error interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	493 * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	494 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	495 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	496 #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	497 (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	498 ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	499
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	500 /** @brief Checks whether the specified UART interrupt has occurred or not.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	501 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	502 * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	503 * UART peripheral.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	504 * @param __IT__ specifies the UART interrupt source to check.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	505 * This parameter can be one of the following values:
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	506 * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	507 * @arg UART_IT_LBD: LIN Break detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	508 * @arg UART_IT_TXE: Transmit Data Register empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	509 * @arg UART_IT_TC: Transmission complete interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	510 * @arg UART_IT_RXNE: Receive Data register not empty interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	511 * @arg UART_IT_IDLE: Idle line detection interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	512 * @arg USART_IT_ERR: Error interrupt
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	513 * @retval The new state of __IT__ (TRUE or FALSE).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	514 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	515 #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	516 (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	517
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	518 /** @brief Enable CTS flow control
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	519 * This macro allows to enable CTS hardware flow control for a given UART instance,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	520 * without need to call HAL_UART_Init() function.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	521 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	522 * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	523 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	524 * - UART instance should have already been initialised (through call of HAL_UART_Init() )
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	525 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	526 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	527 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	528 * The Handle Instance can be USART1, USART2 or LPUART.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	529 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	530 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	531 #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	532 do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	533 SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	534 (__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_CTSE; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	535 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	536
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	537 /** @brief Disable CTS flow control
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	538 * This macro allows to disable CTS hardware flow control for a given UART instance,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	539 * without need to call HAL_UART_Init() function.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	540 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	541 * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	542 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	543 * - UART instance should have already been initialised (through call of HAL_UART_Init() )
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	544 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	545 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	546 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	547 * The Handle Instance can be USART1, USART2 or LPUART.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	548 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	549 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	550 #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	551 do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	552 CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	553 (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	554 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	555
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	556 /** @brief Enable RTS flow control
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	557 * This macro allows to enable RTS hardware flow control for a given UART instance,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	558 * without need to call HAL_UART_Init() function.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	559 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	560 * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	561 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	562 * - UART instance should have already been initialised (through call of HAL_UART_Init() )
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	563 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	564 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	565 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	566 * The Handle Instance can be USART1, USART2 or LPUART.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	567 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	568 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	569 #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	570 do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	571 SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	572 (__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_RTSE; \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	573 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	574
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	575 /** @brief Disable RTS flow control
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	576 * This macro allows to disable RTS hardware flow control for a given UART instance,
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	577 * without need to call HAL_UART_Init() function.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	578 * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	579 * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	580 * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	581 * - UART instance should have already been initialised (through call of HAL_UART_Init() )
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	582 * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	583 * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	584 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	585 * The Handle Instance can be USART1, USART2 or LPUART.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	586 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	587 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	588 #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	589 do{ \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	590 CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	591 (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	592 } while(0U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	593
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	594 /** @brief macros to enables the UART's one bit sample method
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	595 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	596 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	597 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	598 #define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\|= USART_CR3_ONEBIT)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	599
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	600 /** @brief macros to disables the UART's one bit sample method
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	601 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	602 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	603 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	604 #define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	605
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	606 /** @brief Enable UART
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	607 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	608 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	609 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	610 #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	611
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	612 /** @brief Disable UART
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	613 * @param __HANDLE__ specifies the UART Handle.
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	614 * @retval None
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	615 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	616 #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	617 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	618 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	619 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	620
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	621 /* Exported functions --------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	622 /** @addtogroup UART_Exported_Functions
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	623 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	624 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	625
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	626 /** @addtogroup UART_Exported_Functions_Group1
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	627 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	628 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	629 /* Initialization/de-initialization functions **********************************/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	630 HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	631 HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	632 HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	633 HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	634 HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	635 void HAL_UART_MspInit(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	636 void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	637 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	638 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	639 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	640
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	641 /** @addtogroup UART_Exported_Functions_Group2
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	642 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	643 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	644 /* IO operation functions *******************************************************/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	645 HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	646 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	647 HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	648 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	649 HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	650 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	651 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	652 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	653 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	654 /* Transfer Abort functions */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	655 HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	656 HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	657 HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	658 HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	659 HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	660 HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	661
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	662 void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	663 void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	664 void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	665 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	666 void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	667 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	668 void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	669 void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	670 void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	671 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	672 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	673 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	674
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	675 /** @addtogroup UART_Exported_Functions_Group3
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	676 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	677 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	678 /* Peripheral Control functions ************************************************/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	679 HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	680 HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	681 HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	682 HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	683 HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	684 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	685 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	686 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	687
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	688 /** @addtogroup UART_Exported_Functions_Group4
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	689 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	690 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	691 /* Peripheral State functions **************************************************/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	692 HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	693 uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	694 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	695 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	696 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	697
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	698 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	699 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	700 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	701 /* Private types -------------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	702 /* Private variables ---------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	703 /* Private constants ---------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	704 /** @defgroup UART_Private_Constants UART Private Constants
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	705 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	706 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	707 /** @brief UART interruptions flag mask
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	708 *
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	709 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	710 #define UART_CR1_REG_INDEX 1U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	711 #define UART_CR2_REG_INDEX 2U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	712 #define UART_CR3_REG_INDEX 3U
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	713 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	714 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	715 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	716
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	717 /* Private macros ------------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	718 /** @defgroup UART_Private_Macros UART Private Macros
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	719 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	720 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	721 #define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	722 ((LENGTH) == UART_WORDLENGTH_9B))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	723 #define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	724 #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	725 ((STOPBITS) == UART_STOPBITS_2))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	726 #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	727 ((PARITY) == UART_PARITY_EVEN) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	728 ((PARITY) == UART_PARITY_ODD))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	729 #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	730 (((CONTROL) == UART_HWCONTROL_NONE) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	731 ((CONTROL) == UART_HWCONTROL_RTS) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	732 ((CONTROL) == UART_HWCONTROL_CTS) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	733 ((CONTROL) == UART_HWCONTROL_RTS_CTS))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	734 #define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	735 #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	736 ((STATE) == UART_STATE_ENABLE))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	737 #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	738 ((SAMPLING) == UART_OVERSAMPLING_8))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	739 #define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	740 #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	741 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	742 #define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) \|\| \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	743 ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	744 #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	745 #define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	746
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	747 #define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)25U)/(4U(_BAUD_)))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	748 #define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	749 #define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	750 /* UART BRR = mantissa + overflow + fraction
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	751 = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	752 #define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	753 (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	754 (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	755
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	756 #define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)25U)/(2U(_BAUD_)))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	757 #define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	758 #define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U)
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	759 /* UART BRR = mantissa + overflow + fraction
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	760 = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	761 #define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	762 ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	763 (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	764
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	765 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	766 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	767 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	768
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	769 /* Private functions ---------------------------------------------------------*/
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	770 /** @defgroup UART_Private_Functions UART Private Functions
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	771 * @{
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	772 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	773
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	774 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	775 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	776 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	777
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	778 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	779 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	780 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	781
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	782 /**
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	783 * @}
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	784 */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	785
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	786 #ifdef __cplusplus
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	787 }
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	788 #endif
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	789
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	790 #endif /* __STM32F4xx_HAL_UART_H */
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	791
c78bcbd5deda Added current STM32 standandard libraries in version independend folder structure Ideenmodellierer parents: diff changeset	792 /********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Mercurial > public > ostc4

annotate Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h @ 850:bc2fcd002fc4 Evo_2_23