Mercurial > public > ostc4
annotate Discovery/Inc/stm32f4xx_hal_conf.h @ 623:ba83a8ef9bad
Improvment frame Handling:
In previous version, especially during fast menu operations, from time to time a flicker (in case of cyclic updated views) or corrupted menus appeared. Possible root cause is a interferance in the chain: refresh display (~100ms) => release frame (in parallel to) provide frame (~45ms) => clear frame (~45ms). to improve the behaviour the clear frame loop is not iterated until all bufferes are cleared (before one buffer every~45ms). getFrame() does now iterate through all frame buffers instead reusing the first possible (to avoid ghoust views and to provide more time to housekeeping function for cleanup)
| author | Ideenmodellierer |
|---|---|
| date | Sun, 07 Feb 2021 22:04:43 +0100 |
| parents | f35e53ef04e0 |
| children | bc6c90e20d9e |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Inc/stm32f4xx_hal_conf.h | |
| 5 /// \brief The assert_param macro is used for function's parameters check. | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 /// \par COPYRIGHT(c) 2014 STMicroelectronics | |
| 27 /// | |
| 28 /// Redistribution and use in source and binary forms, with or without modification, | |
| 29 /// are permitted provided that the following conditions are met: | |
| 30 /// 1. Redistributions of source code must retain the above copyright notice, | |
| 31 /// this list of conditions and the following disclaimer. | |
| 32 /// 2. Redistributions in binary form must reproduce the above copyright notice, | |
| 33 /// this list of conditions and the following disclaimer in the documentation | |
| 34 /// and/or other materials provided with the distribution. | |
| 35 /// 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| 36 /// may be used to endorse or promote products derived from this software | |
| 37 /// without specific prior written permission. | |
| 38 /// | |
| 39 /// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| 40 /// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| 41 /// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| 42 /// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| 43 /// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| 44 /// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| 45 /// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| 46 /// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| 47 /// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| 48 /// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| 49 ////////////////////////////////////////////////////////////////////////////// | |
| 50 | |
| 51 /* Define to prevent recursive inclusion -------------------------------------*/ | |
| 52 #ifndef STM32F4xx_HAL_CONF_H | |
| 53 #define STM32F4xx_HAL_CONF_H | |
| 54 | |
| 55 /* Exported constants --------------------------------------------------------*/ | |
| 56 | |
| 57 /* ######################### Hardware Selection ############################## */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
58 /* #define STM32F429xx definition is now done in preprocessor*/ |
| 38 | 59 |
| 60 /* ########################## Module Selection ############################## */ | |
| 61 /** | |
| 62 * @brief This is the list of modules to be used in the HAL driver | |
| 63 */ | |
| 64 #define HAL_MODULE_ENABLED | |
| 65 //#define HAL_ADC_MODULE_ENABLED | |
| 66 //#define HAL_CAN_MODULE_ENABLED | |
| 67 //#define HAL_CRC_MODULE_ENABLED | |
| 68 //#define HAL_CRYP_MODULE_ENABLED | |
| 69 //#define HAL_DAC_MODULE_ENABLED | |
| 70 //#define HAL_DCMI_MODULE_ENABLED | |
| 71 //#define HAL_ETH_MODULE_ENABLED | |
| 72 //#define HAL_NAND_MODULE_ENABLED | |
| 73 //#define HAL_NOR_MODULE_ENABLED | |
| 74 //#define HAL_PCCARD_MODULE_ENABLED | |
| 75 //#define HAL_SRAM_MODULE_ENABLED | |
| 76 //#define HAL_HASH_MODULE_ENABLED | |
| 77 //#define HAL_I2C_MODULE_ENABLED | |
| 78 //#define HAL_I2S_MODULE_ENABLED | |
| 79 //#define HAL_IWDG_MODULE_ENABLED | |
| 80 //#define HAL_RNG_MODULE_ENABLED | |
| 81 //#define HAL_SAI_MODULE_ENABLED | |
| 82 //#define HAL_SD_MODULE_ENABLED | |
| 83 //#define HAL_USART_MODULE_ENABLED | |
| 84 //#define HAL_IRDA_MODULE_ENABLED | |
| 85 //#define HAL_SMARTCARD_MODULE_ENABLED | |
| 86 //#define HAL_WWDG_MODULE_ENABLED | |
| 87 //#define HAL_PCD_MODULE_ENABLED | |
| 88 //#define HAL_HCD_MODULE_ENABLED | |
| 89 #define HAL_SDRAM_MODULE_ENABLED | |
| 90 #define HAL_GPIO_MODULE_ENABLED | |
| 91 #define HAL_LTDC_MODULE_ENABLED | |
| 92 #define HAL_DMA_MODULE_ENABLED | |
| 93 #define HAL_DMA2D_MODULE_ENABLED | |
| 94 #define HAL_RCC_MODULE_ENABLED | |
| 95 #define HAL_RTC_MODULE_ENABLED | |
| 96 #define HAL_SPI_MODULE_ENABLED | |
| 97 #define HAL_TIM_MODULE_ENABLED | |
| 98 #define HAL_UART_MODULE_ENABLED | |
| 99 #define HAL_FLASH_MODULE_ENABLED | |
| 100 #define HAL_PWR_MODULE_ENABLED | |
| 101 #define HAL_CORTEX_MODULE_ENABLED | |
| 102 | |
| 103 /* ########################## HSE/HSI Values adaptation ##################### */ | |
| 104 /** | |
| 105 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. | |
| 106 * This value is used by the RCC HAL module to compute the system frequency | |
| 107 * (when HSE is used as system clock source, directly or through the PLL). | |
| 108 */ | |
| 109 #if !defined (HSE_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
110 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ |
| 38 | 111 #endif /* HSE_VALUE */ |
| 112 | |
| 113 #if !defined (HSE_STARTUP_TIMEOUT) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
114 #define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */ |
| 38 | 115 #endif /* HSE_STARTUP_TIMEOUT */ |
| 116 | |
| 117 /** | |
| 118 * @brief Internal High Speed oscillator (HSI) value. | |
| 119 * This value is used by the RCC HAL module to compute the system frequency | |
| 120 * (when HSI is used as system clock source, directly or through the PLL). | |
| 121 */ | |
| 122 #if !defined (HSI_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
123 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ |
| 38 | 124 #endif /* HSI_VALUE */ |
| 125 | |
| 126 /** | |
| 127 * @brief Internal Low Speed oscillator (LSI) value. | |
| 128 */ | |
| 129 #if !defined (LSI_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
130 #define LSI_VALUE ((uint32_t)40000U) |
| 38 | 131 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
| 132 The real value may vary depending on the variations | |
| 133 in voltage and temperature. */ | |
| 134 /** | |
| 135 * @brief External Low Speed oscillator (LSE) value. | |
| 136 */ | |
| 137 #if !defined (LSE_VALUE) | |
| 138 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ | |
| 139 #endif /* LSE_VALUE */ | |
| 140 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
141 #if !defined (LSE_STARTUP_TIMEOUT) |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
142 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
143 #endif /* LSE_STARTUP_TIMEOUT */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
144 |
| 38 | 145 /** |
| 146 * @brief External clock source for I2S peripheral | |
| 147 * This value is used by the I2S HAL module to compute the I2S clock source | |
| 148 * frequency, this source is inserted directly through I2S_CKIN pad. | |
| 149 */ | |
| 150 #if !defined (EXTERNAL_CLOCK_VALUE) | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
151 #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ |
| 38 | 152 #endif /* EXTERNAL_CLOCK_VALUE */ |
| 153 | |
| 154 /* Tip: To avoid modifying this file each time you need to use different HSE, | |
| 155 === you can define the HSE value in your toolchain compiler preprocessor. */ | |
| 156 | |
| 157 /* ########################### System Configuration ######################### */ | |
| 158 /** | |
| 159 * @brief This is the HAL system configuration section | |
| 160 */ | |
| 161 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
162 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ |
| 38 | 163 #define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority */ |
| 164 #define USE_RTOS 0 | |
| 165 #define PREFETCH_ENABLE 1 | |
| 166 #define INSTRUCTION_CACHE_ENABLE 1 | |
| 167 #define DATA_CACHE_ENABLE 1 | |
| 168 | |
| 169 /* ########################## Assert Selection ############################## */ | |
| 170 /** | |
| 171 * @brief Uncomment the line below to expanse the "assert_param" macro in the | |
| 172 * HAL drivers code | |
| 173 */ | |
| 174 /* #define USE_FULL_ASSERT 1 */ | |
| 175 | |
| 176 /* ################## Ethernet peripheral configuration ##################### */ | |
| 177 | |
| 178 /* Section 1 : Ethernet peripheral configuration */ | |
| 179 | |
| 180 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
181 #define MAC_ADDR0 2U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
182 #define MAC_ADDR1 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
183 #define MAC_ADDR2 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
184 #define MAC_ADDR3 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
185 #define MAC_ADDR4 0U |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
186 #define MAC_ADDR5 0U |
| 38 | 187 |
| 188 /* Definition of the Ethernet driver buffers size and count */ | |
| 189 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ | |
| 190 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ | |
| 191 #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ | |
| 192 #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ | |
| 193 | |
| 194 /* Section 2: PHY configuration section */ | |
| 195 | |
| 196 /* DP83848 PHY Address*/ | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
197 #define DP83848_PHY_ADDRESS 0x01U |
| 38 | 198 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
199 #define PHY_RESET_DELAY ((uint32_t)0x000000FFU) |
| 38 | 200 /* PHY Configuration delay */ |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
201 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) |
| 38 | 202 |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
203 #define PHY_READ_TO ((uint32_t)0x0000FFFFU) |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
204 #define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) |
| 38 | 205 |
| 206 /* Section 3: Common PHY Registers */ | |
| 207 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
208 #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
209 #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ |
| 38 | 210 |
| 211 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ | |
| 212 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ | |
| 213 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ | |
| 214 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ | |
| 215 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ | |
| 216 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ | |
| 217 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ | |
| 218 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ | |
| 219 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ | |
| 220 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ | |
| 221 | |
| 222 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ | |
| 223 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ | |
| 224 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ | |
| 225 | |
| 226 /* Section 4: Extended PHY Registers */ | |
| 227 | |
|
131
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
228 #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
229 #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ |
|
f35e53ef04e0
Update of configuration and projectfiles to support new library folder structure
Ideenmodellierer
parents:
38
diff
changeset
|
230 #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ |
| 38 | 231 |
| 232 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ | |
| 233 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ | |
| 234 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ | |
| 235 | |
| 236 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ | |
| 237 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ | |
| 238 | |
| 239 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ | |
| 240 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ | |
| 241 | |
| 242 /* Includes ------------------------------------------------------------------*/ | |
| 243 /** | |
| 244 * @brief Include module's header file | |
| 245 */ | |
| 246 | |
| 247 #ifdef HAL_RCC_MODULE_ENABLED | |
| 248 #include "stm32f4xx_hal_rcc.h" | |
| 249 #endif /* HAL_RCC_MODULE_ENABLED */ | |
| 250 | |
| 251 #ifdef HAL_GPIO_MODULE_ENABLED | |
| 252 #include "stm32f4xx_hal_gpio.h" | |
| 253 #endif /* HAL_GPIO_MODULE_ENABLED */ | |
| 254 | |
| 255 #ifdef HAL_DMA_MODULE_ENABLED | |
| 256 #include "stm32f4xx_hal_dma.h" | |
| 257 #endif /* HAL_DMA_MODULE_ENABLED */ | |
| 258 | |
| 259 #ifdef HAL_CORTEX_MODULE_ENABLED | |
| 260 #include "stm32f4xx_hal_cortex.h" | |
| 261 #endif /* HAL_CORTEX_MODULE_ENABLED */ | |
| 262 | |
| 263 #ifdef HAL_ADC_MODULE_ENABLED | |
| 264 #include "stm32f4xx_hal_adc.h" | |
| 265 #endif /* HAL_ADC_MODULE_ENABLED */ | |
| 266 | |
| 267 #ifdef HAL_CAN_MODULE_ENABLED | |
| 268 #include "stm32f4xx_hal_can.h" | |
| 269 #endif /* HAL_CAN_MODULE_ENABLED */ | |
| 270 | |
| 271 #ifdef HAL_CRC_MODULE_ENABLED | |
| 272 #include "stm32f4xx_hal_crc.h" | |
| 273 #endif /* HAL_CRC_MODULE_ENABLED */ | |
| 274 | |
| 275 #ifdef HAL_CRYP_MODULE_ENABLED | |
| 276 #include "stm32f4xx_hal_cryp.h" | |
| 277 #endif /* HAL_CRYP_MODULE_ENABLED */ | |
| 278 | |
| 279 #ifdef HAL_DMA2D_MODULE_ENABLED | |
| 280 #include "stm32f4xx_hal_dma2d.h" | |
| 281 #endif /* HAL_DMA2D_MODULE_ENABLED */ | |
| 282 | |
| 283 #ifdef HAL_DAC_MODULE_ENABLED | |
| 284 #include "stm32f4xx_hal_dac.h" | |
| 285 #endif /* HAL_DAC_MODULE_ENABLED */ | |
| 286 | |
| 287 #ifdef HAL_DCMI_MODULE_ENABLED | |
| 288 #include "stm32f4xx_hal_dcmi.h" | |
| 289 #endif /* HAL_DCMI_MODULE_ENABLED */ | |
| 290 | |
| 291 #ifdef HAL_ETH_MODULE_ENABLED | |
| 292 #include "stm32f4xx_hal_eth.h" | |
| 293 #endif /* HAL_ETH_MODULE_ENABLED */ | |
| 294 | |
| 295 #ifdef HAL_FLASH_MODULE_ENABLED | |
| 296 #include "stm32f4xx_hal_flash.h" | |
| 297 #endif /* HAL_FLASH_MODULE_ENABLED */ | |
| 298 | |
| 299 #ifdef HAL_SRAM_MODULE_ENABLED | |
| 300 #include "stm32f4xx_hal_sram.h" | |
| 301 #endif /* HAL_SRAM_MODULE_ENABLED */ | |
| 302 | |
| 303 #ifdef HAL_NOR_MODULE_ENABLED | |
| 304 #include "stm32f4xx_hal_nor.h" | |
| 305 #endif /* HAL_NOR_MODULE_ENABLED */ | |
| 306 | |
| 307 #ifdef HAL_NAND_MODULE_ENABLED | |
| 308 #include "stm32f4xx_hal_nand.h" | |
| 309 #endif /* HAL_NAND_MODULE_ENABLED */ | |
| 310 | |
| 311 #ifdef HAL_PCCARD_MODULE_ENABLED | |
| 312 #include "stm32f4xx_hal_pccard.h" | |
| 313 #endif /* HAL_PCCARD_MODULE_ENABLED */ | |
| 314 | |
| 315 #ifdef HAL_SDRAM_MODULE_ENABLED | |
| 316 #include "stm32f4xx_hal_sdram.h" | |
| 317 #endif /* HAL_SDRAM_MODULE_ENABLED */ | |
| 318 | |
| 319 #ifdef HAL_HASH_MODULE_ENABLED | |
| 320 #include "stm32f4xx_hal_hash.h" | |
| 321 #endif /* HAL_HASH_MODULE_ENABLED */ | |
| 322 | |
| 323 #ifdef HAL_I2C_MODULE_ENABLED | |
| 324 #include "stm32f4xx_hal_i2c.h" | |
| 325 #endif /* HAL_I2C_MODULE_ENABLED */ | |
| 326 | |
| 327 #ifdef HAL_I2S_MODULE_ENABLED | |
| 328 #include "stm32f4xx_hal_i2s.h" | |
| 329 #endif /* HAL_I2S_MODULE_ENABLED */ | |
| 330 | |
| 331 #ifdef HAL_IWDG_MODULE_ENABLED | |
| 332 #include "stm32f4xx_hal_iwdg.h" | |
| 333 #endif /* HAL_IWDG_MODULE_ENABLED */ | |
| 334 | |
| 335 #ifdef HAL_LTDC_MODULE_ENABLED | |
| 336 #include "stm32f4xx_hal_ltdc.h" | |
| 337 #endif /* HAL_LTDC_MODULE_ENABLED */ | |
| 338 | |
| 339 #ifdef HAL_PWR_MODULE_ENABLED | |
| 340 #include "stm32f4xx_hal_pwr.h" | |
| 341 #endif /* HAL_PWR_MODULE_ENABLED */ | |
| 342 | |
| 343 #ifdef HAL_RNG_MODULE_ENABLED | |
| 344 #include "stm32f4xx_hal_rng.h" | |
| 345 #endif /* HAL_RNG_MODULE_ENABLED */ | |
| 346 | |
| 347 #ifdef HAL_RTC_MODULE_ENABLED | |
| 348 #include "stm32f4xx_hal_rtc.h" | |
| 349 #endif /* HAL_RTC_MODULE_ENABLED */ | |
| 350 | |
| 351 #ifdef HAL_SAI_MODULE_ENABLED | |
| 352 #include "stm32f4xx_hal_sai.h" | |
| 353 #endif /* HAL_SAI_MODULE_ENABLED */ | |
| 354 | |
| 355 #ifdef HAL_SD_MODULE_ENABLED | |
| 356 #include "stm32f4xx_hal_sd.h" | |
| 357 #endif /* HAL_SD_MODULE_ENABLED */ | |
| 358 | |
| 359 #ifdef HAL_SPI_MODULE_ENABLED | |
| 360 #include "stm32f4xx_hal_spi.h" | |
| 361 #endif /* HAL_SPI_MODULE_ENABLED */ | |
| 362 | |
| 363 #ifdef HAL_TIM_MODULE_ENABLED | |
| 364 #include "stm32f4xx_hal_tim.h" | |
| 365 #endif /* HAL_TIM_MODULE_ENABLED */ | |
| 366 | |
| 367 #ifdef HAL_UART_MODULE_ENABLED | |
| 368 #include "stm32f4xx_hal_uart.h" | |
| 369 #endif /* HAL_UART_MODULE_ENABLED */ | |
| 370 | |
| 371 #ifdef HAL_USART_MODULE_ENABLED | |
| 372 #include "stm32f4xx_hal_usart.h" | |
| 373 #endif /* HAL_USART_MODULE_ENABLED */ | |
| 374 | |
| 375 #ifdef HAL_IRDA_MODULE_ENABLED | |
| 376 #include "stm32f4xx_hal_irda.h" | |
| 377 #endif /* HAL_IRDA_MODULE_ENABLED */ | |
| 378 | |
| 379 #ifdef HAL_SMARTCARD_MODULE_ENABLED | |
| 380 #include "stm32f4xx_hal_smartcard.h" | |
| 381 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ | |
| 382 | |
| 383 #ifdef HAL_WWDG_MODULE_ENABLED | |
| 384 #include "stm32f4xx_hal_wwdg.h" | |
| 385 #endif /* HAL_WWDG_MODULE_ENABLED */ | |
| 386 | |
| 387 #ifdef HAL_PCD_MODULE_ENABLED | |
| 388 #include "stm32f4xx_hal_pcd.h" | |
| 389 #endif /* HAL_PCD_MODULE_ENABLED */ | |
| 390 | |
| 391 #ifdef HAL_HCD_MODULE_ENABLED | |
| 392 #include "stm32f4xx_hal_hcd.h" | |
| 393 #endif /* HAL_HCD_MODULE_ENABLED */ | |
| 394 | |
| 395 /* Exported macro ------------------------------------------------------------*/ | |
| 396 #ifdef USE_FULL_ASSERT | |
| 397 /** | |
| 398 * @brief The assert_param macro is used for function's parameters check. | |
| 399 * @param expr: If expr is false, it calls assert_failed function | |
| 400 * which reports the name of the source file and the source | |
| 401 * line number of the call that failed. | |
| 402 * If expr is true, it returns no value. | |
| 403 * @retval None | |
| 404 */ | |
| 405 #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) | |
| 406 /* Exported functions ------------------------------------------------------- */ | |
| 407 void assert_failed(uint8_t* file, uint32_t line); | |
| 408 #else | |
| 409 #define assert_param(expr) ((void)0) | |
| 410 #endif /* USE_FULL_ASSERT */ | |
| 411 | |
| 412 #endif /* STM32F4xx_HAL_CONF_H */ |