Mercurial > public > ostc4
annotate Discovery/Src/ostc.c @ 307:b6436edfb2c0 cleanup-4
cleanup: factor out unused stopwatch code
Visually, this looks a bit of a dangerous cleanup, but its not :-)
To explain this cleanup: stopwatch_seconds is never used, so assign
to it is useless, and the variable can be removed. Now,
stopwatch_start_at_this_dive_time_seconds is not used any more, so
remove it as well. Now, look at the boolResetStopwatch code. It
is used but only to reset itself. This makes the whole stopwatch
block in data_exchange_main.c a useless thing. All the other
cleanup is trivial.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Wed, 22 May 2019 22:22:15 +0200 |
| parents | 5ca177d2df5d |
| children | 37ee61f93124 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/ostc.c | |
| 5 /// \brief Hardware specific configuration | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 05-Dec-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "ostc.h" | |
| 31 #include "stm32f4xx_hal.h" | |
| 32 | |
| 33 #ifndef BOOTLOADER_STANDALONE | |
| 34 #include "tCCR.h" | |
| 35 #endif | |
| 36 | |
| 37 /* Exported variables --------------------------------------------------------*/ | |
| 38 SPI_HandleTypeDef hspiDisplay; | |
| 39 SPI_HandleTypeDef cpu2DmaSpi; | |
| 40 | |
| 41 | |
| 42 UART_HandleTypeDef UartHandle; | |
|
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
140
diff
changeset
|
43 #ifdef USART_PIEZO |
| 38 | 44 UART_HandleTypeDef UartPiezoTxHandle; |
|
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
140
diff
changeset
|
45 #endif |
| 38 | 46 UART_HandleTypeDef UartIR_HUD_Handle; |
| 47 | |
| 48 __IO ITStatus UartReady = RESET; | |
| 49 __IO ITStatus UartReadyHUD = RESET; | |
| 50 | |
| 51 /* Private types -------------------------------------------------------------*/ | |
| 52 | |
| 53 /* Private variables ---------------------------------------------------------*/ | |
| 54 | |
| 55 /* Private variables with external access via get_xxx() function -------------*/ | |
| 56 | |
| 57 /* Private function prototypes -----------------------------------------------*/ | |
| 58 | |
| 59 /* Exported functions --------------------------------------------------------*/ | |
| 60 | |
| 61 /** SPI init function | |
| 62 * called from HAL | |
| 63 */ | |
| 64 void MX_SPI_Init(void) | |
| 65 { | |
| 66 hspiDisplay.Instance = SPI5; | |
| 67 hspiDisplay.Init.Mode = SPI_MODE_MASTER; | |
| 68 hspiDisplay.Init.Direction = SPI_DIRECTION_2LINES; | |
| 69 hspiDisplay.Init.DataSize = SPI_DATASIZE_8BIT; | |
| 70 hspiDisplay.Init.CLKPolarity = SPI_POLARITY_LOW; | |
| 71 hspiDisplay.Init.CLKPhase = SPI_PHASE_1EDGE; | |
| 72 hspiDisplay.Init.NSS = SPI_NSS_SOFT; | |
| 73 hspiDisplay.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;//SPI_BAUDRATEPRESCALER_4;//SPI_BAUDRATEPRESCALER_256; | |
| 74 hspiDisplay.Init.FirstBit = SPI_FIRSTBIT_MSB; | |
| 75 hspiDisplay.Init.TIMode = SPI_TIMODE_DISABLED; | |
| 76 hspiDisplay.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED; | |
| 77 HAL_SPI_Init(&hspiDisplay); | |
| 78 | |
| 79 cpu2DmaSpi.Instance = SPI1; | |
| 80 cpu2DmaSpi.Init.Mode = SPI_MODE_MASTER; | |
| 81 cpu2DmaSpi.Init.Direction = SPI_DIRECTION_2LINES; | |
| 82 cpu2DmaSpi.Init.DataSize = SPI_DATASIZE_8BIT; | |
| 83 cpu2DmaSpi.Init.CLKPolarity = SPI_POLARITY_LOW; | |
| 84 cpu2DmaSpi.Init.CLKPhase = SPI_PHASE_1EDGE; | |
| 85 cpu2DmaSpi.Init.NSS = SPI_NSS_SOFT;//SPI_NSS_HARD_OUTPUT;//SPI_NSS_SOFT; | |
|
140
f6c52eb0e25d
Increase prescalar => frame takes about 4ms.
Ideenmodellierer
parents:
104
diff
changeset
|
86 cpu2DmaSpi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_128; |
| 38 | 87 cpu2DmaSpi.Init.FirstBit = SPI_FIRSTBIT_MSB; |
| 88 cpu2DmaSpi.Init.TIMode = SPI_TIMODE_DISABLED; | |
| 89 cpu2DmaSpi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED; | |
| 90 cpu2DmaSpi.Init.CRCPolynomial = 7; | |
| 91 | |
| 92 HAL_SPI_Init(&cpu2DmaSpi); | |
| 93 } | |
| 94 | |
| 95 void MX_GPIO_Init(void) | |
| 96 { | |
| 97 GPIO_InitTypeDef GPIO_InitStruct; | |
| 98 | |
| 99 DISPLAY_CSB_GPIO_ENABLE(); | |
| 100 DISPLAY_RESETB_GPIO_ENABLE(); | |
| 101 EXTFLASH_CSB_GPIO_ENABLE(); | |
| 102 SMALLCPU_CSB_GPIO_ENABLE(); | |
| 103 OSCILLOSCOPE_GPIO_ENABLE(); | |
| 104 OSCILLOSCOPE2_GPIO_ENABLE(); | |
| 105 | |
| 106 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; | |
| 107 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 108 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; | |
| 109 | |
| 110 GPIO_InitStruct.Pin = DISPLAY_CSB_PIN; | |
| 111 HAL_GPIO_Init(DISPLAY_CSB_GPIO_PORT, &GPIO_InitStruct); | |
| 112 | |
| 113 GPIO_InitStruct.Pin = DISPLAY_RESETB_PIN; | |
| 114 HAL_GPIO_Init(DISPLAY_RESETB_GPIO_PORT, &GPIO_InitStruct); | |
| 115 | |
| 116 GPIO_InitStruct.Pin = EXTFLASH_CSB_PIN; | |
| 117 HAL_GPIO_Init(EXTFLASH_CSB_GPIO_PORT, &GPIO_InitStruct); | |
| 118 | |
| 119 GPIO_InitStruct.Pin = OSCILLOSCOPE_PIN; | |
| 120 HAL_GPIO_Init(OSCILLOSCOPE_GPIO_PORT, &GPIO_InitStruct); | |
| 121 | |
| 122 GPIO_InitStruct.Pin = OSCILLOSCOPE2_PIN; | |
| 123 HAL_GPIO_Init(OSCILLOSCOPE2_GPIO_PORT, &GPIO_InitStruct); | |
| 124 | |
| 125 #ifdef DISPLAY_BACKLIGHT_PIN | |
| 126 DISPLAY_BACKLIGHT_GPIO_ENABLE(); | |
| 127 GPIO_InitStruct.Pin = DISPLAY_BACKLIGHT_PIN; | |
| 128 HAL_GPIO_Init(DISPLAY_BACKLIGHT_GPIO_PORT, &GPIO_InitStruct); | |
| 129 HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_PORT,DISPLAY_BACKLIGHT_PIN,GPIO_PIN_SET); | |
| 130 #endif | |
| 131 | |
| 132 #ifdef SMALLCPU_CSB_PIN | |
| 133 SMALLCPU_CSB_GPIO_ENABLE(); | |
| 134 GPIO_InitStruct.Pin = SMALLCPU_CSB_PIN; | |
| 135 HAL_GPIO_Init(SMALLCPU_CSB_GPIO_PORT, &GPIO_InitStruct); | |
| 136 HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); | |
| 137 #endif | |
| 138 | |
| 139 #ifdef SMALLCPU_BOOT0_PIN | |
| 140 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 141 SMALLCPU_BOOT0_GPIO_ENABLE(); | |
| 142 GPIO_InitStruct.Pin = SMALLCPU_BOOT0_PIN; | |
| 143 HAL_GPIO_Init(SMALLCPU_BOOT0_GPIO_PORT, &GPIO_InitStruct); | |
| 144 HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET); | |
| 145 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 146 #endif | |
| 147 | |
| 148 #ifdef IR_HUD_ENABLE_PIN | |
| 149 IR_HUD_ENABLE_GPIO_ENABLE(); | |
| 150 GPIO_InitStruct.Pin = IR_HUD_ENABLE_PIN; | |
| 151 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 152 HAL_GPIO_Init(IR_HUD_ENABLE_GPIO_PORT, &GPIO_InitStruct); | |
| 153 HAL_GPIO_WritePin(IR_HUD_ENABLE_GPIO_PORT,IR_HUD_ENABLE_PIN,GPIO_PIN_SET); | |
| 154 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 155 #endif | |
| 156 | |
| 157 #ifdef BLE_NENABLE_PIN | |
| 158 BLE_NENABLE_GPIO_ENABLE(); | |
| 159 MX_Bluetooth_PowerOff(); | |
| 160 #endif | |
| 161 | |
| 162 #ifdef TESTPIN | |
| 163 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 164 TEST_GPIO_ENABLE(); | |
| 165 GPIO_InitStruct.Pin = TEST_PIN; | |
| 166 HAL_GPIO_Init(TEST_GPIO_PORT, &GPIO_InitStruct); | |
| 167 HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_SET); | |
| 168 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 169 #endif | |
| 170 } | |
| 171 | |
| 172 | |
| 173 void MX_TestPin_High(void) | |
| 174 { | |
| 175 #ifdef TESTPIN | |
| 176 HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_SET); | |
| 177 #endif | |
| 178 } | |
| 179 | |
| 180 | |
| 181 void MX_TestPin_Low(void) | |
| 182 { | |
| 183 #ifdef TESTPIN | |
| 184 HAL_GPIO_WritePin(TEST_GPIO_PORT,TEST_PIN,GPIO_PIN_RESET); | |
| 185 #endif | |
| 186 } | |
| 187 | |
| 188 void MX_Bluetooth_PowerOn(void) | |
| 189 { | |
| 190 GPIO_InitTypeDef GPIO_InitStruct; | |
| 191 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; | |
| 192 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 193 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; | |
| 194 GPIO_InitStruct.Pin = BLE_NENABLE_PIN; | |
| 195 HAL_GPIO_Init(BLE_NENABLE_GPIO_PORT, &GPIO_InitStruct); | |
| 196 HAL_GPIO_WritePin(BLE_NENABLE_GPIO_PORT,BLE_NENABLE_PIN,GPIO_PIN_RESET); | |
| 197 } | |
| 198 | |
| 199 | |
| 200 void MX_Bluetooth_PowerOff(void) | |
| 201 { | |
| 202 GPIO_InitTypeDef GPIO_InitStruct; | |
| 203 GPIO_InitStruct.Mode = GPIO_MODE_INPUT; | |
| 204 GPIO_InitStruct.Pin = BLE_NENABLE_PIN; | |
| 205 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 206 HAL_GPIO_Init(BLE_NENABLE_GPIO_PORT, &GPIO_InitStruct); | |
| 207 } | |
| 208 | |
| 209 | |
| 210 void MX_SmallCPU_Reset_To_Boot(void) | |
| 211 { | |
| 212 #ifdef SMALLCPU_NRESET_PIN | |
| 213 GPIO_InitTypeDef GPIO_InitStruct; | |
| 214 | |
| 215 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; | |
| 216 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 217 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; | |
| 218 | |
| 219 SMALLCPU_NRESET_GPIO_ENABLE(); | |
| 220 GPIO_InitStruct.Pin = SMALLCPU_NRESET_PIN; | |
| 221 HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct); | |
| 222 HAL_GPIO_WritePin(SMALLCPU_NRESET_GPIO_PORT,SMALLCPU_NRESET_PIN,GPIO_PIN_RESET); | |
| 223 HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_SET); | |
| 224 HAL_Delay(2); | |
| 225 GPIO_InitStruct.Mode = GPIO_MODE_INPUT; | |
| 226 HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct); | |
| 227 HAL_Delay(100); | |
| 228 HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET); | |
| 229 #endif | |
| 230 } | |
| 231 | |
| 232 void MX_SmallCPU_Reset_To_Standard(void) | |
| 233 { | |
| 234 #ifdef SMALLCPU_NRESET_PIN | |
| 235 GPIO_InitTypeDef GPIO_InitStruct; | |
| 236 | |
| 237 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; | |
| 238 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 239 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; | |
| 240 | |
| 241 SMALLCPU_NRESET_GPIO_ENABLE(); | |
| 242 GPIO_InitStruct.Pin = SMALLCPU_NRESET_PIN; | |
| 243 HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct); | |
| 244 HAL_GPIO_WritePin(SMALLCPU_NRESET_GPIO_PORT,SMALLCPU_NRESET_PIN,GPIO_PIN_RESET); | |
| 245 HAL_GPIO_WritePin(SMALLCPU_BOOT0_GPIO_PORT,SMALLCPU_BOOT0_PIN,GPIO_PIN_RESET); | |
| 246 HAL_Delay(2); | |
| 247 GPIO_InitStruct.Mode = GPIO_MODE_INPUT; | |
| 248 HAL_GPIO_Init(SMALLCPU_NRESET_GPIO_PORT, &GPIO_InitStruct); | |
| 249 #endif | |
| 250 } | |
| 251 | |
| 252 void MX_UART_Init(void) | |
| 253 { | |
| 254 /*##-1- Configure the UART peripheral ######################################*/ | |
| 255 /* Put the USART peripheral in the Asynchronous mode (UART Mode) */ | |
| 256 /* UART1 configured as follow: | |
| 257 - Word Length = 8 Bits | |
| 258 - Stop Bit = One Stop bit | |
| 259 - Parity = None | |
| 260 - BaudRate = 9600 baud | |
| 261 - Hardware flow control disabled (RTS and CTS signals) */ | |
| 262 | |
| 263 #ifdef USARTx_CTS_PIN | |
| 264 UartHandle.Init.HwFlowCtl = UART_HWCONTROL_RTS_CTS; | |
| 265 #else | |
| 266 UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; | |
| 267 #endif | |
| 268 UartHandle.Instance = USARTx; | |
| 269 UartHandle.Init.BaudRate = 115200; | |
| 270 UartHandle.Init.WordLength = UART_WORDLENGTH_8B; | |
| 271 UartHandle.Init.StopBits = UART_STOPBITS_1; | |
| 272 UartHandle.Init.Parity = UART_PARITY_NONE; | |
| 273 UartHandle.Init.Mode = UART_MODE_TX_RX; | |
| 274 HAL_UART_Init(&UartHandle); | |
| 275 | |
| 276 #ifdef USART_PIEZO | |
| 277 UartPiezoTxHandle.Instance = USART_PIEZO; | |
| 278 UartPiezoTxHandle.Init.BaudRate = 1200; | |
| 279 UartPiezoTxHandle.Init.WordLength = UART_WORDLENGTH_8B; | |
| 280 UartPiezoTxHandle.Init.StopBits = UART_STOPBITS_1; | |
| 281 UartPiezoTxHandle.Init.Parity = UART_PARITY_NONE; | |
| 282 UartPiezoTxHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; | |
| 283 UartPiezoTxHandle.Init.Mode = UART_MODE_TX_RX; | |
| 284 | |
| 285 HAL_UART_Init(&UartPiezoTxHandle); | |
| 286 #endif | |
| 287 | |
| 288 #ifdef USART_IR_HUD | |
| 289 UartIR_HUD_Handle.Instance = USART_IR_HUD; | |
| 290 UartIR_HUD_Handle.Init.BaudRate = 2400; | |
| 291 UartIR_HUD_Handle.Init.WordLength = UART_WORDLENGTH_8B; | |
| 292 UartIR_HUD_Handle.Init.StopBits = UART_STOPBITS_1; | |
| 293 UartIR_HUD_Handle.Init.Parity = UART_PARITY_NONE; | |
| 294 UartIR_HUD_Handle.Init.HwFlowCtl = UART_HWCONTROL_NONE; | |
| 295 UartIR_HUD_Handle.Init.Mode = UART_MODE_TX_RX; | |
| 296 | |
| 297 HAL_UART_Init(&UartIR_HUD_Handle); | |
| 298 #endif | |
| 299 } | |
| 300 | |
| 301 void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) | |
| 302 { | |
| 303 if(huart == &UartHandle) | |
| 304 UartReady = SET; | |
| 305 } | |
| 306 | |
| 307 //void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) | |
| 308 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) | |
| 309 { | |
| 310 if(huart == &UartHandle) | |
| 311 UartReady = SET; | |
| 312 else | |
| 313 if(huart == &UartIR_HUD_Handle) | |
| 314 { | |
| 315 UartReadyHUD = SET; | |
| 316 } | |
| 317 } | |
| 318 | |
| 319 void MX_tell_reset_logik_alles_ok(void) | |
| 320 { | |
| 321 #ifdef RESET_LOGIC_ALLES_OK_PIN | |
| 322 GPIO_InitTypeDef GPIO_InitStruct; | |
| 323 | |
| 324 RESET_LOGIC_ALLES_OK_GPIO_ENABLE(); | |
| 325 | |
| 326 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; | |
| 327 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 328 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; | |
| 329 GPIO_InitStruct.Pin = RESET_LOGIC_ALLES_OK_PIN; | |
| 330 HAL_GPIO_Init(RESET_LOGIC_ALLES_OK_GPIO_PORT, &GPIO_InitStruct); | |
| 331 | |
| 332 HAL_GPIO_WritePin(RESET_LOGIC_ALLES_OK_GPIO_PORT,RESET_LOGIC_ALLES_OK_PIN,GPIO_PIN_RESET); | |
| 333 HAL_Delay(1); | |
| 334 HAL_GPIO_WritePin(RESET_LOGIC_ALLES_OK_GPIO_PORT,RESET_LOGIC_ALLES_OK_PIN,GPIO_PIN_SET); | |
| 335 | |
| 336 GPIO_InitStruct.Mode = GPIO_MODE_INPUT; | |
| 337 HAL_GPIO_Init(RESET_LOGIC_ALLES_OK_GPIO_PORT, &GPIO_InitStruct); | |
| 338 #endif | |
| 339 } | |
| 340 | |
| 341 | |
| 342 #ifndef BOOTLOADER_STANDALONE | |
| 343 void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) | |
| 344 { | |
| 345 if(huart == &UartIR_HUD_Handle) | |
| 346 tCCR_restart(); | |
| 347 } | |
| 348 #endif |