annotate Discovery/Src/check_warning.c @ 861:ad96f99ebc78 Evo_2_23

Synchronize ADC and UART activities: depending on the cable configuration the UART sensor operation may have an impact to the ADC measurement (peaks). To avoid this the ADC measurements are now only started in case no UART communication is pending.
author Ideenmodellierer
date Tue, 07 May 2024 21:25:25 +0200
parents ba1aebc6d5af
children e373e90a48db
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
1 /**
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
2 ******************************************************************************
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
3 * @file check_warning.c
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
4 * @author heinrichs weikamp gmbh
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
5 * @date 17-Nov-2014
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
6 * @version V0.0.1
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
7 * @since 17-Nov-2014
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
8 * @brief check and set warnings for warnings
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
9 *
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
10 @verbatim
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
11 ==============================================================================
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
12 ##### How to use #####
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
13 ==============================================================================
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
14 OSTC3 Warnings:
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
15 niedriger Batteriezustand (
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
16 zu hoher oder zu niedriger Sauerstoffpartialdruck (ppO2) 0.2 - 1.6
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
17 zu hoher CNS (Gefahr der Sauerstoffvergiftung) 90%
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
18 zu hohe Gradientenfaktoren 90 - 90
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
19 Missachtung der Dekostopps (der �berschrittene Dekostopp wird rot angezeigt) 0 m
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
20 zu hohe Aufstiegsgeschwindigkeit 30 m/min
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
21 aGF-Warnung: die Berechnung der Dekompression wird �ber alternative GF-Werte durchgef�hrt
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
22 Fallback-Warnung bei ausgefallenem Sensor
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
23
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
24 @endverbatim
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
25 ******************************************************************************
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
26 * @attention
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
27 *
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
28 * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
29 *
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
30 ******************************************************************************
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
31 */
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
32
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
33 /* Includes ------------------------------------------------------------------*/
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
34
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
35 #include <stdbool.h>
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
36
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
37 #include "data_exchange.h"
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
38 #include "check_warning.h"
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
39 #include "settings.h"
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
40 #include "decom.h"
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
41 #include "tCCR.h"
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
42 #include "tHome.h"
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
43
636
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
44
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
45 #define DEBOUNCE_FALLBACK_TIME_MS (5000u) /* set warning after 5 seconds of pending error condition */
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
46
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
47 #define SETPOINT_DECO_START_RANGE_M 3.0
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
48 #define SWITCH_DEPTH_LOW_MINIMUM_M 1.0
756
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
49
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
50 /* Private variables with access ----------------------------------------------*/
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
51 static uint8_t betterGasId = 0;
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
52 static uint8_t betterBailoutGasId = 0;
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
53 static uint8_t betterSetpointId = 1;
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
54 static int8_t fallback = 0;
636
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
55 static uint16_t debounceFallbackTimeMS = 0;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
56
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
57 /* Private function prototypes -----------------------------------------------*/
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
58 static int8_t check_fallback(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
59 static int8_t check_ppO2(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
60 static int8_t check_O2_sensors(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
61 static int8_t check_CNS(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
62 static int8_t check_Deco(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
63 static int8_t check_AscentRate(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
64 static int8_t check_aGF(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
65 static int8_t check_BetterGas(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
66 static int8_t check_BetterSetpoint(SDiveState * pDiveState);
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
67 static int8_t check_Battery(SDiveState * pDiveState);
478
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
68 #ifdef ENABLE_BOTTLE_SENSOR
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
69 static int8_t check_pressureSensor(SDiveState * pDiveState);
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
70 #endif
756
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
71 #ifdef ENABLE_CO2_SUPPORT
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
72 static int8_t check_co2(SDiveState * pDiveState);
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
73 #endif
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
74 static int8_t check_helper_same_oxygen_and_helium_content(SGasLine * gas1, SGasLine * gas2);
857
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
75 #ifdef HAVE_DEBUG_WARNINGS
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
76 static int8_t check_debug(SDiveState * pDiveState);
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
77 #endif
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
78
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
79
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
80 /* Exported functions --------------------------------------------------------*/
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
81
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
82 void check_warning(void)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
83 {
272
74a8296a2318 cleanup: simplify stateUsed usage
Jan Mulder <jlmulder@xs4all.nl>
parents: 268
diff changeset
84 check_warning2(stateUsedWrite);
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
85 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
86
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
87
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
88 void check_warning2(SDiveState * pDiveState)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
89 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
90 pDiveState->warnings.numWarnings = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
91
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
92 pDiveState->warnings.numWarnings += check_aGF(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
93 pDiveState->warnings.numWarnings += check_AscentRate(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
94 pDiveState->warnings.numWarnings += check_CNS(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
95 pDiveState->warnings.numWarnings += check_Deco(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
96 pDiveState->warnings.numWarnings += check_ppO2(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
97 pDiveState->warnings.numWarnings += check_O2_sensors(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
98 pDiveState->warnings.numWarnings += check_BetterGas(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
99 pDiveState->warnings.numWarnings += check_BetterSetpoint(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
100 pDiveState->warnings.numWarnings += check_Battery(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
101 pDiveState->warnings.numWarnings += check_fallback(pDiveState);
478
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
102 #ifdef ENABLE_BOTTLE_SENSOR
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
103 pDiveState->warnings.numWarnings += check_pressureSensor(pDiveState);
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
104 #endif
756
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
105 #ifdef ENABLE_CO2_SUPPORT
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
106 pDiveState->warnings.numWarnings += check_co2(pDiveState);
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
107 #endif
857
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
108 #ifdef HAVE_DEBUG_WARNINGS
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
109 pDiveState->warnings.numWarnings += check_debug(pDiveState);
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
110 #endif
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
111 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
112
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
113
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
114 void set_warning_fallback(void)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
115 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
116 fallback = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
117 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
118
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
119
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
120 void clear_warning_fallback(void)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
121 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
122 fallback = 0;
636
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
123 debounceFallbackTimeMS = 0;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
124 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
125
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
126
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
127 uint8_t actualBetterGasId(void)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
128 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
129 return betterGasId;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
130 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
131
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
132
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
133 uint8_t actualBetterBailoutGasId(void)
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
134 {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
135 return betterBailoutGasId;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
136 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
137
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
138
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
139 uint8_t actualBetterSetpointId(void)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
140 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
141 return betterSetpointId;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
142 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
143
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
144
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
145 uint8_t actualLeftMaxDepth(const SDiveState * pDiveState)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
146 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
147 if(pDiveState->lifeData.depth_meter > (pDiveState->lifeData.max_depth_meter - 3.0f))
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
148 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
149 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
150 return 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
151 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
152
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
153
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
154 /* Private functions ---------------------------------------------------------*/
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
155 static int8_t check_fallback(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
156 {
662
1b995079c045 PSCR Mode
heinrichs weikamp
parents: 636
diff changeset
157 if(fallback && ((pDiveState->mode != MODE_DIVE) || (!isLoopMode(pDiveState->diveSettings.diveMode))))
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
158 fallback = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
159
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
160 pDiveState->warnings.fallback = fallback;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
161 return pDiveState->warnings.fallback;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
162 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
163
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
164
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
165 static int8_t check_ppO2(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
166 {
582
64bf41faab83 Show Fallback if no valid sensor value is available:
Ideenmodellierer
parents: 563
diff changeset
167 if((pDiveState->mode != MODE_DIVE) || (pDiveState->warnings.fallback))
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
168 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
169 pDiveState->warnings.ppO2Low = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
170 pDiveState->warnings.ppO2High = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
171 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
172 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
173
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
174 uint8_t localPPO2, testPPO2high;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
175
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
176 if(pDiveState->lifeData.ppO2 < 0)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
177 localPPO2 = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
178 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
179 if(pDiveState->lifeData.ppO2 >= 2.5f)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
180 localPPO2 = 255;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
181 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
182 localPPO2 = (uint8_t)(pDiveState->lifeData.ppO2 * 100);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
183
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
184 if((localPPO2 + 1) <= settingsGetPointer()->ppO2_min)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
185 pDiveState->warnings.ppO2Low = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
186 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
187 pDiveState->warnings.ppO2Low = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
188
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
189 if(actualLeftMaxDepth(pDiveState))
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
190 testPPO2high = settingsGetPointer()->ppO2_max_deco;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
191 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
192 testPPO2high = settingsGetPointer()->ppO2_max_std;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
193
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
194 if(localPPO2 >= (testPPO2high + 1))
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
195 pDiveState->warnings.ppO2High = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
196 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
197 pDiveState->warnings.ppO2High = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
198
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
199 return pDiveState->warnings.ppO2Low + pDiveState->warnings.ppO2High;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
200 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
201
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
202
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
203 static int8_t check_O2_sensors(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
204 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
205 pDiveState->warnings.sensorLinkLost = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
206 pDiveState->warnings.sensorOutOfBounds[0] = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
207 pDiveState->warnings.sensorOutOfBounds[1] = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
208 pDiveState->warnings.sensorOutOfBounds[2] = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
209
662
1b995079c045 PSCR Mode
heinrichs weikamp
parents: 636
diff changeset
210 if(isLoopMode(pDiveState->diveSettings.diveMode) && (pDiveState->diveSettings.CCR_Mode == CCRMODE_Sensors))
563
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
211
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
212 if(settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_OPTIC)
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
213 {
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
214 {
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
215 if(!get_HUD_battery_voltage_V())
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
216 pDiveState->warnings.sensorLinkLost = 1;
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
217 }
d97f0e395058 Refine o2 sensor diagnostic functions:
Ideenmodellierer
parents: 478
diff changeset
218 }
634
7c73f066cd16 Enable sensor check for Analog PPO2 mode:
Ideenmodellierer
parents: 582
diff changeset
219 test_O2_sensor_values_outOfBounds(&pDiveState->warnings.sensorOutOfBounds[0], &pDiveState->warnings.sensorOutOfBounds[1], &pDiveState->warnings.sensorOutOfBounds[2]);
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
220 return pDiveState->warnings.sensorLinkLost
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
221 + pDiveState->warnings.sensorOutOfBounds[0]
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
222 + pDiveState->warnings.sensorOutOfBounds[1]
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
223 + pDiveState->warnings.sensorOutOfBounds[2];
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
224 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
225
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
226
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
227 static uint8_t getBetterGasId(bool getDiluent, uint8_t startingGasId, SDiveState *diveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
228 {
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
229 SDiveSettings diveSettings = diveState->diveSettings;
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
230 SGasLine localGas;
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
231 uint8_t betterGasIdLocal = startingGasId;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
232 uint8_t bestGasDepth = 255;
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
233 uint8_t i;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
234
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
235 uint8_t gasIdOffset;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
236 if (getDiluent) {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
237 gasIdOffset = NUM_OFFSET_DILUENT;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
238 } else {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
239 gasIdOffset = 0;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
240 }
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
241
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
242 /* life data is float, gas data is uint8 */
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
243 if (actualLeftMaxDepth(diveState)) { /* deco gases */
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
244 for (i=1+gasIdOffset; i<= 5+gasIdOffset; i++) {
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
245 memcpy(&localGas,&diveSettings.gas[i],sizeof(SGasLine));
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
246 if((localGas.note.ub.first) && (diveSettings.diveMode == DIVEMODE_PSCR)) /* handle first gas as if it would be a deco gas set to MOD */
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
247 {
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
248 localGas.note.ub.active = 1;
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
249 localGas.note.ub.deco = 1;
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
250 localGas.depth_meter = calc_MOD(i);
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
251 }
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
252 if ((localGas.note.ub.active)
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
253 && (localGas.note.ub.deco)
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
254 && (localGas.depth_meter)
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
255 && (localGas.depth_meter >= (diveState->lifeData.depth_meter - 0.01f ))
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
256 && (localGas.depth_meter <= bestGasDepth)) {
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
257 betterGasIdLocal = i;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
258 bestGasDepth = diveSettings.gas[i].depth_meter;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
259 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
260 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
261 } else { /* travel gases */
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
262 bestGasDepth = 0;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
263 //check for travalgas
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
264 for (i = 1 + gasIdOffset; i <= 5 + gasIdOffset; i++) {
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
265 if ((diveSettings.gas[i].note.ub.active)
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
266 && (diveSettings.gas[i].note.ub.travel)
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
267 && (diveSettings.gas[i].depth_meter_travel)
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
268 && (diveSettings.gas[i].depth_meter_travel <= (diveState->lifeData.depth_meter + 0.01f ))
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
269 && (diveSettings.gas[i].depth_meter_travel >= bestGasDepth)) {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
270 betterGasIdLocal = i;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
271 bestGasDepth = diveSettings.gas[i].depth_meter;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
272 }
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
273 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
274 }
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
275 if((!getDiluent) && (betterGasIdLocal > NUM_OFFSET_DILUENT)) /* an OC gas was requested but Id is pointing to a diluent => return first OC */
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
276 {
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
277 for (i = 1 ; i <= NUM_OFFSET_DILUENT; i++)
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
278 {
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
279 if(diveSettings.gas[i].note.ub.first)
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
280 {
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
281 betterGasIdLocal = i;
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
282 break;
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
283 }
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
284 }
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
285 }
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
286
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
287
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
288 return betterGasIdLocal;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
289 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
290
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
291
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
292 static int8_t check_BetterGas(SDiveState *diveState)
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
293 {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
294 diveState->warnings.betterGas = 0;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
295
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
296 if (stateUsed->mode != MODE_DIVE) {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
297 betterGasId = 0;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
298
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
299 return 0;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
300 }
773
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
301
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
302 SDiveSettings diveSettings = diveState->diveSettings;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
303 SLifeData lifeData = diveState->lifeData;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
304
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
305 if (isLoopMode(diveSettings.diveMode)) {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
306 betterGasId = getBetterGasId(true, lifeData.actualGas.GasIdInSettings, diveState);
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
307 betterBailoutGasId = getBetterGasId(false, lifeData.lastDiluent_GasIdInSettings, diveState);
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
308 } else {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
309 betterGasId = getBetterGasId(false, lifeData.actualGas.GasIdInSettings, diveState);
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
310 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
311
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
312 if (betterGasId != lifeData.actualGas.GasIdInSettings && !check_helper_same_oxygen_and_helium_content(&diveSettings.gas[betterGasId], &diveSettings.gas[lifeData.actualGas.GasIdInSettings])) {
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
313 diveState->warnings.betterGas = 1;
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
314 }
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
315
2c243233c999 Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents: 771
diff changeset
316 return diveState->warnings.betterGas;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
317 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
318
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
319
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
320 uint8_t getSetpointLowId(void)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
321 {
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
322 SSettings *settings = settingsGetPointer();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
323
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
324 if (settings->autoSetpoint) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
325 return SETPOINT_INDEX_AUTO_LOW;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
326 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
327
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
328 uint8_t setpointLowId = 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
329 uint8_t setpointLowDepthM = UINT8_MAX;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
330 for (unsigned i = 1; i <= NUM_GASES; i++) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
331 if (stateUsed->diveSettings.setpoint[i].depth_meter && stateUsed->diveSettings.setpoint[i].depth_meter < setpointLowDepthM) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
332 setpointLowId = i;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
333 setpointLowDepthM = stateUsed->diveSettings.setpoint[i].depth_meter;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
334 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
335 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
336
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
337 return setpointLowId;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
338 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
339
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
340
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
341 uint8_t getSetpointHighId(void)
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
342 {
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
343 SSettings *settings = settingsGetPointer();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
344
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
345 if (settings->autoSetpoint) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
346 return SETPOINT_INDEX_AUTO_HIGH;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
347 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
348
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
349 uint8_t setpointHighId = 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
350 uint8_t setpointHighDepthM = 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
351 for (unsigned i = 1; i <= NUM_GASES; i++) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
352 if (stateUsed->diveSettings.setpoint[i].depth_meter && stateUsed->diveSettings.setpoint[i].depth_meter >= setpointHighDepthM) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
353 setpointHighId = i;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
354 setpointHighDepthM = stateUsed->diveSettings.setpoint[i].depth_meter;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
355 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
356 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
357
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
358 return setpointHighId;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
359 }
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
360
662
1b995079c045 PSCR Mode
heinrichs weikamp
parents: 636
diff changeset
361
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
362 uint8_t getSetpointDecoId(void)
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
363 {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
364 SSettings *settings = settingsGetPointer();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
365
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
366 if (settings->autoSetpoint && stateUsed->diveSettings.setpoint[SETPOINT_INDEX_AUTO_DECO].note.ub.active) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
367 return SETPOINT_INDEX_AUTO_DECO;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
368 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
369
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
370 return 0;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
371 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
372
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
373
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
374 /* check for better travel!!! setpoint hw 151210
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
375 */
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
376 static int8_t check_BetterSetpoint(SDiveState *diveState)
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
377 {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
378 diveState->warnings.betterSetpoint = 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
379
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
380 if (stateUsed->mode != MODE_DIVE) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
381 betterSetpointId = 1;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
382
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
383 return 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
384 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
385
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
386 SSettings *settings = settingsGetPointer();
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
387
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
388 float currentDepthM = diveState->lifeData.depth_meter;
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
389 float lastChangeDepthM = diveState->lifeData.lastSetpointChangeDepthM;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
390 if (settings->dive_mode == DIVEMODE_CCR && lastChangeDepthM != currentDepthM) {
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
391 bool descending = currentDepthM > lastChangeDepthM;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
392 uint8_t betterSetpointIdLocal = 0;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
393
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
394 if (settings->autoSetpoint) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
395 bool decoSetpointEnabled = diveState->diveSettings.setpoint[SETPOINT_INDEX_AUTO_DECO].note.ub.active;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
396 const SDecoinfo *decoInfo = getDecoInfo();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
397 uint8_t nextDecoStopDepthM;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
398 uint16_t nextDecoStopTimeRemainingS;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
399 tHome_findNextStop(decoInfo->output_stop_length_seconds, &nextDecoStopDepthM, &nextDecoStopTimeRemainingS);
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
400
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
401 if (decoSetpointEnabled && nextDecoStopDepthM && currentDepthM < nextDecoStopDepthM + SETPOINT_DECO_START_RANGE_M && !diveState->lifeData.setpointDecoActivated) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
402 betterSetpointIdLocal = SETPOINT_INDEX_AUTO_DECO;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
403 diveState->lifeData.setpointDecoActivated = true;
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
404 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
405
788
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
406 if (descending) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
407 uint8_t switchDepthHighM = diveState->diveSettings.setpoint[SETPOINT_INDEX_AUTO_HIGH].depth_meter;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
408
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
409 if (lastChangeDepthM < switchDepthHighM && switchDepthHighM < currentDepthM && !diveState->lifeData.setpointDecoActivated) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
410 betterSetpointIdLocal = SETPOINT_INDEX_AUTO_HIGH;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
411 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
412 } else {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
413 uint8_t switchDepthLowM = diveState->diveSettings.setpoint[SETPOINT_INDEX_AUTO_LOW].depth_meter;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
414
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
415 if (lastChangeDepthM > SWITCH_DEPTH_LOW_MINIMUM_M && SWITCH_DEPTH_LOW_MINIMUM_M > currentDepthM) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
416 // Avoid draining the oxygen supply by surfacing with a setpoint >= 1.0
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
417 betterSetpointIdLocal = SETPOINT_INDEX_AUTO_LOW;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
418 diveState->lifeData.setpointLowDelayed = false;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
419 } else if (lastChangeDepthM > switchDepthLowM && switchDepthLowM > currentDepthM) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
420 if (nextDecoStopDepthM && settings->delaySetpointLow) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
421 diveState->lifeData.setpointLowDelayed = true;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
422 } else {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
423 betterSetpointIdLocal = SETPOINT_INDEX_AUTO_LOW;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
424 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
425 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
426 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
427
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
428 if (!nextDecoStopDepthM) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
429 // Update the state when the decompression obligation ends
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
430 diveState->lifeData.setpointDecoActivated = false;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
431
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
432 if (diveState->lifeData.setpointLowDelayed) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
433 betterSetpointIdLocal = SETPOINT_INDEX_AUTO_LOW;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
434 diveState->lifeData.setpointLowDelayed = false;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
435 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
436 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
437 } else {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
438 uint8_t setpointLowId = getSetpointLowId();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
439 uint8_t setpointHighId = getSetpointHighId();
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
440 uint8_t betterSetpointSwitchDepthM = descending ? 0 : UINT8_MAX;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
441
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
442 for (unsigned i = 1; i <= NUM_GASES; i++) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
443 uint8_t switchDepthM = diveState->diveSettings.setpoint[i].depth_meter;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
444 if (!switchDepthM || (descending && i == setpointLowId) || (!descending && i == setpointHighId)) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
445 continue;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
446 }
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
447
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
448 if ((descending && lastChangeDepthM < switchDepthM && switchDepthM < currentDepthM && switchDepthM > betterSetpointSwitchDepthM)
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
449 || (!descending && lastChangeDepthM > switchDepthM && switchDepthM > currentDepthM && switchDepthM <= betterSetpointSwitchDepthM)) {
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
450 betterSetpointIdLocal = i;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
451 betterSetpointSwitchDepthM = switchDepthM;
4abfb8a2a435 Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents: 773
diff changeset
452 }
771
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
453 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
454 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
455
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
456 if (betterSetpointIdLocal) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
457 betterSetpointId = betterSetpointIdLocal;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
458 if (diveState->diveSettings.diveMode == DIVEMODE_CCR && diveState->diveSettings.setpoint[betterSetpointIdLocal].setpoint_cbar != diveState->lifeData.actualGas.setPoint_cbar) {
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
459 diveState->warnings.betterSetpoint = 1;
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
460 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
461 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
462 }
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
463
29d9b5bc7946 Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents: 756
diff changeset
464 return diveState->warnings.betterSetpoint;
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
465 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
466
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
467
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
468 /* hw 151030
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
469 */
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
470 static int8_t check_helper_same_oxygen_and_helium_content(SGasLine * gas1, SGasLine * gas2)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
471 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
472 if(gas1->helium_percentage != gas2->helium_percentage)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
473 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
474 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
475 if(gas1->oxygen_percentage != gas2->oxygen_percentage)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
476 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
477 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
478 return 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
479 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
480
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
481
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
482 static int8_t check_CNS(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
483 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
484 if(stateUsed->mode != MODE_DIVE)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
485 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
486 pDiveState->warnings.cnsHigh = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
487 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
488 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
489
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
490 if(pDiveState->lifeData.cns >= (float)(settingsGetPointer()->CNS_max))
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
491 pDiveState->warnings.cnsHigh = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
492 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
493 pDiveState->warnings.cnsHigh = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
494 return pDiveState->warnings.cnsHigh;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
495 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
496
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
497
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
498 static int8_t check_Battery(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
499 {
671
b456be1e152d Support of unknown charging counter values:
Ideenmodellierer
parents: 662
diff changeset
500 if((pDiveState->lifeData.battery_charge > 0) && (pDiveState->lifeData.battery_charge < 10))
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
501 pDiveState->warnings.lowBattery = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
502 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
503 pDiveState->warnings.lowBattery = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
504
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
505 return pDiveState->warnings.lowBattery;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
506 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
507
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
508
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
509 static int8_t check_Deco(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
510 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
511 if(stateUsed->mode != MODE_DIVE)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
512 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
513 pDiveState->warnings.decoMissed = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
514 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
515 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
516
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
517 uint8_t depthNext = decom_get_actual_deco_stop(pDiveState);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
518
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
519 if(!depthNext)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
520 pDiveState->warnings.decoMissed = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
521 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
522 if(pDiveState->lifeData.depth_meter + 0.1f < (float)depthNext)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
523 pDiveState->warnings.decoMissed = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
524 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
525 pDiveState->warnings.decoMissed = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
526
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
527 return pDiveState->warnings.decoMissed;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
528 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
529
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
530
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
531 static int8_t check_AscentRate(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
532 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
533 if(stateUsed->mode != MODE_DIVE)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
534 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
535 pDiveState->warnings.ascentRateHigh = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
536 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
537 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
538
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
539 float warnAscentRateFloat;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
540
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
541 warnAscentRateFloat = (float)(settingsGetPointer()->ascent_MeterPerMinute_max);
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
542
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
543 if(pDiveState->lifeData.ascent_rate_meter_per_min >= warnAscentRateFloat)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
544 pDiveState->warnings.ascentRateHigh = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
545 else
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
546 pDiveState->warnings.ascentRateHigh = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
547 return pDiveState->warnings.ascentRateHigh;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
548 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
549
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
550
268
1b9847d40e81 cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents: 38
diff changeset
551 static int8_t check_aGF(SDiveState * pDiveState)
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
552 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
553 if(stateUsed->mode != MODE_DIVE)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
554 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
555 pDiveState->warnings.aGf = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
556 return 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
557 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
558
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
559 pDiveState->warnings.aGf = 0;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
560 if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE)
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
561 {
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
562 if((pDiveState->diveSettings.gf_high != settingsGetPointer()->GF_high) || (pDiveState->diveSettings.gf_low != settingsGetPointer()->GF_low))
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
563 pDiveState->warnings.aGf = 1;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
564 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
565 return pDiveState->warnings.aGf;
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
566 }
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
567
478
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
568 #ifdef ENABLE_BOTTLE_SENSOR
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
569 static int8_t check_pressureSensor(SDiveState * pDiveState)
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
570 {
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
571 int8_t ret = 0;
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
572 if(pDiveState->lifeData.bottle_bar_age_MilliSeconds[pDiveState->lifeData.actualGas.GasIdInSettings] < 50) /* we received a new value */
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
573 {
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
574 pDiveState->warnings.newPressure = stateUsed->lifeData.bottle_bar[stateUsed->lifeData.actualGas.GasIdInSettings];
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
575 ret = 1;
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
576 }
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
577 else
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
578 {
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
579 pDiveState->warnings.newPressure = 0;
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
580 }
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
581 return ret;
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
582 }
58200d756365 Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents: 272
diff changeset
583 #endif
636
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
584
756
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
585 #ifdef ENABLE_CO2_SUPPORT
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
586 static int8_t check_co2(SDiveState * pDiveState)
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
587 {
831
da632300e7d4 Activated work gas for (p)scr mode:
Ideenmodellierer
parents: 788
diff changeset
588 if((pDiveState->mode != MODE_DIVE) || (settingsGetPointer()->co2_sensor_active == 0))
756
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
589 {
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
590 pDiveState->warnings.co2High = 0;
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
591 }
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
592 else
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
593 {
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
594 if(pDiveState->lifeData.CO2_data.CO2_ppm > CO2_ALARM_LEVEL_PPM)
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
595 {
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
596 pDiveState->warnings.co2High = 1;
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
597 }
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
598 else
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
599 {
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
600 pDiveState->warnings.co2High = 0;
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
601 }
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
602 }
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
603 return pDiveState->warnings.co2High;
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
604 }
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
605 #endif
6de83d8205a0 Added visualization of CO2 during dive:
Ideenmodellierer
parents: 671
diff changeset
606
857
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
607 #ifdef HAVE_DEBUG_WARNINGS
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
608 static int8_t check_debug(SDiveState * pDiveState)
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
609 {
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
610 uint8_t index = 0;
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
611
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
612 pDiveState->warnings.debug = 0;
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
613
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
614 if((settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_DIGITAL) || (settingsGetPointer()->ppo2sensors_source == O2_SENSOR_SOURCE_ANADIG))
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
615 {
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
616 for(index=0; index<3; index++)
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
617 {
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
618 if(((pDiveState->lifeData.extIf_sensor_map[index] == SENSOR_DIGO2M) && (((SSensorDataDiveO2*)(stateUsed->lifeData.extIf_sensor_data[index]))->status & DVO2_FATAL_ERROR)))
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
619 {
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
620 pDiveState->warnings.debug = 1;
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
621 }
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
622 }
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
623 }
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
624 return pDiveState->warnings.debug;
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
625 }
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
626 #endif
ba1aebc6d5af Developer feature debug warning:
Ideenmodellierer
parents: 831
diff changeset
627
636
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
628 uint8_t debounce_warning_fallback(uint16_t debounceStepms)
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
629 {
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
630 uint8_t retVal = 0;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
631
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
632 debounceFallbackTimeMS += debounceStepms;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
633 if(debounceFallbackTimeMS > DEBOUNCE_FALLBACK_TIME_MS)
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
634 {
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
635 debounceFallbackTimeMS = DEBOUNCE_FALLBACK_TIME_MS;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
636 retVal = 1;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
637 }
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
638 return retVal;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
639 }
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
640 void reset_debounce_warning_fallback()
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
641 {
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
642 debounceFallbackTimeMS = 0;
c47766ec3f96 Debounce fallback warning:
Ideenmodellierer
parents: 634
diff changeset
643 }
38
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
644 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/
5f11787b4f42 include in ostc4 repository
heinrichsweikamp
parents:
diff changeset
645