Mercurial > public > ostc4
annotate Documentations/dump-disc.cfg @ 199:ac58a9fb92ac div-fixes-cleaup-2
Bugfix: fix initial CNS data in the logbook header
Apparently, there has been confusion in the past about the data format of the
CNS data in the logbook. This seems to be partially fixed back in 2015, but
this fix forgot that the initial CNS data is also in the logbook header.
So, now, the logbook header also stores the initial CNS data in a correct way,
which fixes the problem of strange CNS values at the very start of repetitive
dives, that get reset in the dive profile after the first CNS sample data comes
along.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Fri, 22 Mar 2019 08:36:39 +0100 |
parents | 01cc5959f199 |
children |
rev | line source |
---|---|
34 | 1 #! openocd -f |
2 # Define the prob used: | |
3 source [find interface/stlink-v2.cfg] | |
4 set WORKAREASIZE 0x8000 | |
5 transport select hla_swd | |
6 | |
7 # Reset options | |
8 set ENABLE_LOW_POWER 1 | |
9 set STOP_WATCHDOG 1 | |
10 reset_config srst_only srst_nogate connect_assert_srst | |
11 | |
12 # Seelct the right chip | |
13 set CHIPNAME stm32f427IIT6 | |
14 set CONNECT_UNDER_RESET 1 | |
15 source [find target/stm32f4x.cfg] | |
16 | |
17 # Allow to continue execution after a connection: | |
18 init_reset run | |
19 | |
20 puts "Flash banks:" | |
21 flash banks | |
22 | |
23 #puts "Reading FIRMWARE..." | |
24 # Requires OpenOCD 0.10.0 / released January 2017 ? | |
25 #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 | |
26 | |
27 #puts "Done." | |
28 exit |