Mercurial > public > ostc4
annotate Discovery/Src/tMenuEditGasOC.c @ 1063:a3f42192da0f Icon_Integration
Always use polling mode for CO2 operation:
In the previous version the CO2 sensor was operated in streaming mode (2 measurements a second) in case it was used stand alone (without multiplexer). This added some complexity to the implementation (setup, error handling etc). To reduce this the sensor will now always be operated in polling mode like it is done for multiplexer operation. To make sure that the correct mode is set a command has been added to the configuration steps.
| author | Ideenmodellierer |
|---|---|
| date | Wed, 11 Feb 2026 18:35:44 +0100 |
| parents | f501d7c35c8f |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tMenuEditGasOC.c | |
| 5 /// \brief Main Template file for editing Open Circuit Gas Settings | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 09-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "tMenuEditGasOC.h" | |
| 31 | |
| 32 #include "check_warning.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "tMenuEdit.h" | |
| 35 #include "unit.h" | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
36 #include "configuration.h" |
| 38 | 37 |
| 38 /* Private types -------------------------------------------------------------*/ | |
| 39 typedef struct | |
| 40 { | |
| 41 uint8_t gasID; | |
| 42 SGasLine * pGasLine; | |
| 43 uint8_t mod; | |
| 44 uint8_t ccr; | |
| 45 uint8_t setpoint; | |
| 46 } SEditGasPage; | |
| 47 | |
| 48 | |
| 49 /* Private variables ---------------------------------------------------------*/ | |
| 50 SEditGasPage editGasPage; | |
| 51 | |
| 52 /* Private function prototypes -----------------------------------------------*/ | |
| 53 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2); | |
| 54 | |
| 55 void openEdit_Gas(uint8_t line, uint8_t ccr); | |
| 56 void openEdit_GasType(void); | |
| 57 | |
| 58 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr); | |
| 59 void openEdit_SpecialDiveGasMenu(uint8_t ccr); | |
| 60 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr); | |
| 61 | |
| 62 void tMEGas_check_switch_to_bailout(void); | |
| 63 | |
| 64 /* Announced function prototypes -----------------------------------------------*/ | |
| 65 uint8_t OnAction_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 66 uint8_t OnAction_GasType (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 67 uint8_t OnAction_ChangeDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 68 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 69 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 70 | |
| 71 uint8_t OnAction_First (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 72 uint8_t OnAction_Deco (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 73 uint8_t OnAction_Travel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 74 uint8_t OnAction_Inactive (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
75 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 76 |
| 77 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 78 uint8_t OnAction_DM_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 79 | |
| 80 /* | |
| 81 uint8_t OnAction_DefaultMix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 82 uint8_t OnAction_ToggleDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 83 uint8_t OnAction_ToggleDefault (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 84 uint8_t OnAction_DefaultDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 85 */ | |
| 86 | |
| 87 /* Exported functions --------------------------------------------------------*/ | |
| 88 | |
| 89 void openEdit_GasCC(uint8_t line) | |
| 90 { | |
| 91 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
92 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
93 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
94 { |
| 662 | 95 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
96 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
97 selectPage(StMOG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
98 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
99 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
100 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
101 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
102 openEdit_Gas(line , 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
103 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
104 } |
| 38 | 105 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
106 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
107 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
108 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
109 openEdit_SpecialDiveGasMenu(1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
110 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
111 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
112 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
113 openEdit_DiveGasSelect(line, 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
114 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
115 } |
| 38 | 116 } |
| 117 | |
| 118 | |
| 119 void openEdit_GasOC(uint8_t line) | |
| 120 { | |
| 121 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
122 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
123 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
124 { |
| 662 | 125 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
126 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
127 selectPage(StMCG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
128 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
129 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
130 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
131 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
132 openEdit_Gas(line, 0); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
133 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
134 } |
| 38 | 135 else |
| 136 if(line == 6) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
137 { |
| 38 | 138 openEdit_SpecialDiveGasMenu(0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
139 } |
| 38 | 140 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
141 { |
| 38 | 142 openEdit_DiveGasSelect(line, 0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
143 } |
| 38 | 144 } |
| 145 | |
| 146 | |
| 147 /* dive mode */ | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
148 void openEdit_DiveSelectBetterGas(bool doBailout) |
| 38 | 149 { |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
150 uint8_t gasId; |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
151 if (doBailout) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
152 gasId = actualBetterBailoutGasId(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
153 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
154 gasId = actualBetterGasId(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
155 } |
| 38 | 156 |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
157 uint8_t ccr = 0; |
| 38 | 158 if(gasId>5) |
| 159 { | |
| 160 gasId -= 5; | |
| 161 ccr = 1; | |
| 162 } | |
| 163 openEdit_DiveGasSelect_Subroutine(gasId,ccr); | |
| 164 if(ccr) | |
| 165 updateSpecificMenu(StMCG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 166 else | |
| 167 updateSpecificMenu(StMOG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 168 } | |
| 169 | |
| 170 | |
| 171 /* select gas in divemode */ | |
| 172 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr) | |
| 173 { | |
| 682 | 174 if(!ccr) |
| 175 { | |
| 176 tMEGas_check_switch_to_bailout(); | |
| 177 } | |
| 178 openEdit_DiveGasSelect_Subroutine(line, ccr); | |
| 179 | |
| 38 | 180 exitMenuEdit_to_Home_with_Menu_Update(); |
| 181 } | |
| 182 | |
| 183 | |
| 184 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr) | |
| 185 { | |
| 186 uint8_t setpoint; | |
| 187 | |
| 699 | 188 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 189 |
| 190 if(ccr) | |
| 191 { | |
| 192 editGasPage.gasID = line + NUM_OFFSET_DILUENT; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
193 setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 194 } |
| 195 else | |
| 196 { | |
| 197 editGasPage.gasID = line; | |
| 198 setpoint = 0; | |
| 199 } | |
| 200 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
201 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
202 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.off) /* disable selection of switched off gases */ |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
203 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
204 return; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
205 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
206 #endif |
| 38 | 207 |
| 208 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
209 setActualGas_DM(&stateUsedWrite->lifeData,editGasPage.gasID,setpoint); |
| 38 | 210 } |
| 211 | |
| 212 /* extra gas and gas on/off option */ | |
| 213 void openEdit_SpecialDiveGasMenu(uint8_t ccr) | |
| 214 { | |
| 215 char text[32]; | |
| 216 uint8_t oxygen, helium, gasOffset, textpointer, lineCount, ptrGas; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
217 //SDiveState * pState; |
| 38 | 218 |
| 699 | 219 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 220 if(ccr) |
| 221 { | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
222 editGasPage.setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 223 } |
| 224 editGasPage.ccr = ccr; | |
| 225 | |
| 226 set_globalState_Menu_Line(6); | |
| 227 | |
| 228 if(ccr) | |
| 229 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 230 else | |
| 231 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 232 | |
| 233 if(ccr) | |
| 234 gasOffset = NUM_OFFSET_DILUENT; | |
| 235 else | |
| 236 gasOffset = 0; | |
| 237 | |
| 238 | |
| 239 text[0] = '\001'; | |
| 240 text[1] = TXT_2BYTE; | |
| 241 if(ccr) | |
| 242 text[2] = TXT2BYTE_SpecialDiveGasMenuCCR; | |
| 243 else | |
| 244 text[2] = TXT2BYTE_SpecialDiveGasMenu; | |
| 245 text[3] = 0; | |
| 246 write_topline(text); | |
| 247 | |
| 248 lineCount = 1; | |
| 249 | |
| 250 | |
| 251 for(int i=1; i<=5; i++) | |
| 252 { | |
| 253 ptrGas = i + gasOffset; | |
| 254 oxygen = stateUsed->diveSettings.gas[ptrGas].oxygen_percentage; | |
| 255 helium = stateUsed->diveSettings.gas[ptrGas].helium_percentage; | |
| 256 | |
| 257 if(oxygen == 100) | |
| 258 textpointer = snprintf(text,10,"Oxy"); | |
| 259 else | |
| 260 if((oxygen == 21) && (helium == 0)) | |
| 261 textpointer = snprintf(text,10,"Air"); | |
| 262 else | |
| 263 textpointer = snprintf(text,10,"%02i/%02i",oxygen,helium); | |
| 264 | |
| 265 if(editGasPage.pGasLine[ptrGas].note.ub.first) | |
| 266 strcpy(&text[textpointer]," *"); | |
| 267 | |
| 268 write_field_on_off(StMOG_DM_ActiveBase+i, 30, 500, ME_Y_LINE_BASE + (lineCount * ME_Y_LINE_STEP), &FontT48, text, stateUsed->diveSettings.gas[ptrGas].note.ub.active); | |
| 269 lineCount++; | |
| 270 } | |
| 271 | |
| 272 if(!ccr) | |
| 273 { | |
| 274 if(stateUsed->diveSettings.gas[0].note.ub.first) | |
| 275 { | |
| 276 oxygen = stateUsed->diveSettings.gas[0].oxygen_percentage; | |
| 277 helium = stateUsed->diveSettings.gas[0].helium_percentage; | |
| 278 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas *", oxygen, helium, 0, 0); | |
| 279 } | |
| 280 else | |
| 281 { | |
| 282 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas", 0, 0, 0, 0); | |
| 283 } | |
| 284 } | |
| 285 | |
| 286 for(int i=1; i<=5; i++) | |
| 287 { | |
| 288 setEvent(StMOG_DM_ActiveBase + i,(uint32_t)OnAction_DM_Active); | |
| 289 } | |
| 290 | |
| 291 if(!ccr) | |
| 292 setEvent(StMOG_DM_ExtraMix,(uint32_t)OnAction_DM_Mix); | |
| 293 } | |
| 294 | |
| 295 | |
| 296 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 297 { | |
| 298 uint8_t gasOffset, newActive; | |
| 299 | |
| 300 if(editGasPage.ccr) | |
| 301 gasOffset = NUM_OFFSET_DILUENT; | |
| 302 else | |
| 303 gasOffset = 0; | |
| 304 | |
| 305 editGasPage.gasID = editId + gasOffset - StMOG_DM_ActiveBase; | |
| 306 | |
| 307 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.first) | |
| 308 return UNSPECIFIC_RETURN; | |
| 309 | |
| 310 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 311 newActive = 0; | |
| 312 else | |
| 313 newActive = 1; | |
| 314 | |
| 315 tMenuEdit_set_on_off(editId, newActive); | |
| 316 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = newActive; | |
| 317 | |
| 318 return UNSPECIFIC_RETURN; | |
| 319 } | |
| 320 | |
| 321 /* only for OC */ | |
| 322 uint8_t OnAction_DM_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 323 { | |
| 324 uint8_t digitContentNew; | |
| 325 uint32_t newOxygen, newHelium; | |
| 326 | |
| 327 if(action == ACTION_BUTTON_ENTER) | |
| 328 { | |
| 329 return digitContent; | |
| 330 } | |
| 331 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 332 { | |
| 333 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 334 | |
| 335 if(newOxygen < 5) | |
| 336 newOxygen = 5; | |
| 337 if(newOxygen == 99) | |
| 338 newOxygen = 100; | |
| 339 if(newHelium > 95) | |
| 340 newHelium = 95; | |
| 341 if((newOxygen + newHelium) > 100) | |
| 342 newOxygen = 100 - newHelium; | |
| 343 | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
344 //SDiveState * pDiveState = 0; |
| 38 | 345 |
| 346 for(int i=1;i<=(2*NUM_GASES);i++) | |
| 347 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 348 | |
|
735
39f48356049b
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
heinrichsweikamp
parents:
699
diff
changeset
|
349 tMEGas_check_switch_to_bailout(); |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
350 setActualGas_ExtraGas(&stateUsedWrite->lifeData, newOxygen, newHelium, 0); |
| 38 | 351 return EXIT_TO_HOME; |
| 352 } | |
| 353 if(action == ACTION_BUTTON_NEXT) | |
| 354 { | |
| 355 digitContentNew = digitContent + 1; | |
| 356 if(digitContentNew > '9') | |
| 357 digitContentNew = '0'; | |
| 358 return digitContentNew; | |
| 359 } | |
| 360 if(action == ACTION_BUTTON_BACK) | |
| 361 { | |
| 362 digitContentNew = digitContent - 1; | |
| 363 if(digitContentNew < '0') | |
| 364 digitContentNew = '9'; | |
| 365 return digitContentNew; | |
| 366 } | |
| 367 | |
| 368 return UNSPECIFIC_RETURN; | |
| 369 } | |
| 370 | |
| 371 | |
| 372 void tMEGas_check_switch_to_bailout(void) | |
| 373 { | |
| 662 | 374 if(isLoopMode(stateUsed->diveSettings.diveMode)) |
| 38 | 375 { |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
376 stateUsedWrite->diveSettings.diveMode = DIVEMODE_OC; |
| 38 | 377 block_diluent_page(); |
| 378 } | |
| 379 } | |
| 380 | |
| 381 | |
| 382 /* surface mode */ | |
| 383 void openEdit_Gas(uint8_t line, uint8_t ccr) | |
| 384 { | |
| 1061 | 385 uint8_t gasID, oxygen, helium, depthDeco, active, first, depthMOD, deco, travel, inactive, off ; |
| 386 #ifdef ENABLE_ADVANCED_GAS | |
| 387 uint8_t bottleSizeLiter; | |
| 388 #endif | |
| 973 | 389 |
| 38 | 390 char text[32]; |
| 391 char textMOD[32]; | |
| 392 uint8_t txtptr; | |
| 393 | |
| 394 if(line) | |
| 395 set_globalState_Menu_Line(line); | |
| 396 else | |
| 397 set_globalState_Menu_Line(NUM_GASES + 1); | |
| 398 | |
| 399 if(ccr) | |
| 400 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 401 else | |
| 402 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 403 | |
| 404 if(ccr) | |
| 405 gasID = line + NUM_OFFSET_DILUENT; | |
| 406 else | |
| 407 gasID = line; | |
| 408 | |
| 409 editGasPage.ccr = ccr; | |
| 410 editGasPage.gasID = gasID; | |
| 411 editGasPage.mod = calc_MOD(gasID); | |
| 412 | |
| 413 SSettings *data = settingsGetPointer(); | |
| 414 editGasPage.pGasLine = data->gas; | |
| 415 | |
| 416 oxygen = editGasPage.pGasLine[gasID].oxygen_percentage; | |
| 417 if(oxygen > 99) | |
| 418 oxygen = 99; | |
| 419 helium = editGasPage.pGasLine[gasID].helium_percentage; | |
| 420 depthDeco = editGasPage.pGasLine[gasID].depth_meter; | |
| 421 //depthTravel = editGasPage.pGasLine[gasID].depth_meter_travel; | |
| 422 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 423 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 424 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 425 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
426 off = editGasPage.pGasLine[gasID].note.ub.off; |
|
982
22d5b477c903
Code cleanup: Remove disabled option to switch deco calc on/off
Ideenmodellierer
parents:
973
diff
changeset
|
427 |
| 1061 | 428 #ifdef ENABLE_ADVANCED_GAS |
| 429 bottleSizeLiter = editGasPage.pGasLine[gasID].bottle_size_liter; | |
| 430 #endif | |
| 38 | 431 |
| 432 if(active) | |
| 433 inactive = 0; | |
| 434 else | |
| 435 inactive = 1; | |
| 436 | |
| 437 depthMOD = editGasPage.mod; | |
| 438 | |
| 439 int i = 0; | |
| 440 if(gasID >= 10) | |
| 441 { | |
| 442 i = 1; | |
| 443 strcpy(text, "\001" "Gas #10 X"); | |
| 444 } | |
| 445 else | |
| 446 strcpy(text, "\001" "Gas #0 X"); | |
| 447 | |
| 448 if(ccr) | |
| 449 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 450 else | |
| 451 text[8+i] = TXT_OC_Gas_Edit; | |
| 452 | |
| 453 if(gasID >= 10) | |
| 454 text[6+i] += gasID - 10; | |
| 455 else | |
| 456 text[6+i] += gasID; | |
| 457 | |
| 458 write_topline(text); | |
| 459 if(actual_menu_content == MENU_SURFACE) | |
| 460 { | |
| 461 write_label_fix( 20, 800, ME_Y_LINE1, &FontT48, TXT_Mix); | |
| 462 write_field_udigit(StMOG_Mix, 210, 400, ME_Y_LINE1, &FontT48, "##/##", (uint32_t)oxygen, (uint32_t)helium, 0, 0); | |
| 463 | |
| 464 | |
| 465 text[1] = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
466 if(off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
467 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
468 else |
| 38 | 469 if(inactive) |
| 470 text[0] = TXT_Inactive; | |
| 471 else | |
| 472 if(first) | |
| 473 text[0] = TXT_First; | |
| 474 else | |
| 475 if(deco) | |
| 476 text[0] = TXT_Deco; | |
| 477 else | |
| 478 if(travel) | |
| 479 text[0] = TXT_Travel; | |
| 480 else | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
481 text[0] = TXT_Inactive; |
| 38 | 482 |
| 483 write_field_button(StMOG_GasType, 20, 710, ME_Y_LINE2, &FontT48, text); | |
| 484 | |
| 485 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
486 if((deco) || (travel && ccr)) |
| 38 | 487 { |
| 488 text[0] = TXT_ChangeDepth; | |
| 489 text[1] = ' '; | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
490 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
491 if(deco) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
492 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
493 text[2] = TXT_Deco; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
494 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
495 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
496 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
497 text[2] = TXT_Travel; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
498 } |
| 38 | 499 text[3] = 0; |
| 500 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 501 | |
| 502 textMOD[0] = '#'; | |
| 503 textMOD[1] = '#'; | |
| 504 textMOD[2] = '#'; | |
| 505 textMOD[3] = unit_depth_char1(); | |
| 506 textMOD[4] = unit_depth_char2(); | |
| 507 textMOD[5] = 0; | |
| 508 write_field_udigit(StMOG_ChangeDepth, 600, 710, ME_Y_LINE3, &FontT48,textMOD, (uint32_t)unit_depth_integer(depthDeco), 0, 0, 0); | |
| 509 | |
| 510 txtptr = 0; | |
| 511 text[txtptr++] = TXT_2BYTE; | |
| 512 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 513 text[txtptr++] = 0; | |
| 514 write_field_button(StMOG_SetToMOD, 20, 710, ME_Y_LINE4, &FontT48,text); | |
| 515 } | |
| 516 else | |
| 517 { | |
| 518 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
519 text[txtptr++] = '\031'; |
| 38 | 520 text[txtptr++] = TXT_ChangeDepth; |
| 521 text[txtptr++] = ' '; | |
| 522 text[txtptr++] = TXT_Deco; | |
| 523 text[txtptr++] = 0; | |
| 524 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 525 | |
| 526 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
527 text[txtptr++] = '\031'; |
| 38 | 528 text[txtptr++] = TXT_2BYTE; |
| 529 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 530 text[txtptr++] = 0; | |
| 531 write_label_var( 20 ,800, ME_Y_LINE4, &FontT48, text); | |
| 532 } | |
| 1061 | 533 #ifdef ENABLE_ADVANCED_GAS |
| 38 | 534 txtptr = 0; |
| 535 text[txtptr++] = TXT_2BYTE; | |
| 536 text[txtptr++] = TXT2BYTE_Bottle; | |
| 537 text[txtptr++] = 0; | |
| 538 write_label_var( 20 ,800, ME_Y_LINE5, &FontT48, text); | |
| 539 write_field_2digit(StMOG_Bottle, 600, 710, ME_Y_LINE5, &FontT48,"## ltr", (uint32_t)bottleSizeLiter, 0, 0, 0); | |
| 1061 | 540 #endif |
| 38 | 541 stop_cursor_fields(); |
| 542 | |
| 543 textMOD[0] = '#'; | |
| 544 textMOD[1] = '#'; | |
| 545 textMOD[2] = '#'; | |
| 546 textMOD[3] = unit_depth_char1(); | |
| 547 textMOD[4] = unit_depth_char2(); | |
| 548 textMOD[5] = ' '; | |
| 549 textMOD[6] = 'M'; | |
| 550 textMOD[7] = 'O'; | |
| 551 textMOD[8] = 'D'; | |
| 552 textMOD[9] = 0; | |
| 553 | |
| 554 write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, textMOD, (uint32_t)unit_depth_integer(depthMOD), 0, 0, 0); | |
| 555 // write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, "###m MOD", (uint32_t)depthMOD, 0, 0, 0); | |
| 556 | |
| 557 setEvent(StMOG_Mix, (uint32_t)OnAction_Mix); | |
| 558 setEvent(StMOG_GasType, (uint32_t)OnAction_GasType); | |
| 559 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
560 if((deco) || (travel && ccr)) |
| 38 | 561 { |
| 562 setEvent(StMOG_ChangeDepth, (uint32_t)OnAction_ChangeDepth); | |
| 563 setEvent(StMOG_SetToMOD, (uint32_t)OnAction_SetToMOD); | |
| 564 } | |
| 1061 | 565 #ifdef ENABLE_ADVANCED_GAS |
| 38 | 566 setEvent(StMOG_Bottle, (uint32_t)OnAction_BottleSize); |
| 1061 | 567 #endif |
| 38 | 568 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); |
| 569 } | |
| 570 } | |
| 571 | |
| 572 /* surface mode */ | |
| 573 void openEdit_GasType(void) | |
| 574 { | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
575 uint8_t gasID, active, first, deco, travel, inactive, off; |
| 38 | 576 char text[32]; |
| 577 | |
| 578 | |
| 579 if(editGasPage.ccr) | |
| 580 { | |
| 581 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 582 setBackMenu((uint32_t)openEdit_GasCC, editGasPage.gasID - NUM_OFFSET_DILUENT, 2); | |
| 583 } | |
| 584 else | |
| 585 { | |
| 586 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 587 setBackMenu((uint32_t)openEdit_GasOC, editGasPage.gasID, 2); | |
| 588 } | |
| 589 | |
| 590 gasID = editGasPage.gasID; | |
| 591 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 592 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 593 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 594 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
595 off = editGasPage.pGasLine[gasID].note.ub.off; |
| 38 | 596 |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
597 if((active) || (off)) |
| 38 | 598 inactive = 0; |
| 599 else | |
| 600 inactive = 1; | |
| 601 | |
| 602 | |
| 603 /* header */ | |
| 604 int i = 0; | |
| 605 if(gasID >= 10) | |
| 606 { | |
| 607 i = 1; | |
| 608 strcpy(text, "\001" "Gas #10 X"); | |
| 609 } | |
| 610 else | |
| 611 strcpy(text, "\001" "Gas #0 X"); | |
| 612 | |
| 613 if(editGasPage.ccr) | |
| 614 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 615 else | |
| 616 text[8+i] = TXT_OC_Gas_Edit; | |
| 617 | |
| 618 if(gasID >= 10) | |
| 619 text[6+i] += gasID - 10; | |
| 620 else | |
| 621 text[6+i] += gasID; | |
| 622 write_topline(text); | |
| 623 | |
| 624 text[1] = 0; | |
| 625 text[0] = TXT_First; | |
| 626 write_field_on_off(StMOG_First, 30, 400, ME_Y_LINE1, &FontT48, text, first); | |
| 627 | |
| 628 text[0] = TXT_Deco; | |
| 629 write_field_on_off(StMOG_Deco, 30, 400, ME_Y_LINE2, &FontT48, text, deco); | |
| 630 | |
| 631 text[0] = TXT_Travel; | |
| 632 write_field_on_off(StMOG_Travel, 30, 400, ME_Y_LINE3, &FontT48, text, travel); | |
| 633 | |
| 634 text[0] = TXT_Inactive; | |
| 635 write_field_on_off(StMOG_Inactive, 30, 400, ME_Y_LINE4, &FontT48, text, inactive); | |
| 636 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
637 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
638 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
639 write_field_on_off(StMOG_Off, 30, 400, ME_Y_LINE5, &FontT48, text, off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
640 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
641 |
| 38 | 642 setEvent(StMOG_First, (uint32_t)OnAction_First); |
| 643 setEvent(StMOG_Deco, (uint32_t)OnAction_Deco); | |
| 644 setEvent(StMOG_Travel, (uint32_t)OnAction_Travel); | |
| 645 setEvent(StMOG_Inactive, (uint32_t)OnAction_Inactive); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
646 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
647 setEvent(StMOG_Off, (uint32_t)OnAction_Off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
648 #endif |
| 38 | 649 |
| 650 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 651 } | |
| 652 | |
| 653 uint8_t OnAction_GasType(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 654 { | |
| 655 openEdit_GasType(); | |
| 656 return UNSPECIFIC_RETURN; | |
| 657 } | |
| 658 | |
| 659 uint8_t OnAction_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 660 { | |
| 661 uint8_t digitContentNew; | |
| 662 uint32_t newOxygen, newHelium; | |
| 663 | |
| 664 if(action == ACTION_BUTTON_ENTER) | |
| 665 { | |
| 666 return digitContent; | |
| 667 } | |
| 668 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 669 { | |
| 670 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 671 | |
| 672 if(newOxygen < 5) | |
| 673 newOxygen = 5; | |
| 674 if(newOxygen == 99) | |
| 675 newOxygen = 100; | |
| 676 if(newHelium > 95) | |
| 677 newHelium = 95; | |
| 678 if((newOxygen + newHelium) > 100) | |
| 679 newOxygen = 100 - newHelium; | |
| 680 | |
| 681 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 682 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 683 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 684 | |
| 685 if(newOxygen == 100) | |
| 686 newOxygen = 99; | |
| 687 | |
| 688 tMenuEdit_newInput(editId, newOxygen, newHelium, 0, 0); | |
| 689 tMenuEdit_newInput(StMOG_MOD, (uint32_t)unit_depth_integer(editGasPage.mod), 0, 0, 0); | |
| 690 | |
| 691 return UPDATE_DIVESETTINGS; | |
| 692 } | |
| 693 if(action == ACTION_BUTTON_NEXT) | |
| 694 { | |
| 695 digitContentNew = digitContent + 1; | |
| 696 if(digitContentNew > '9') | |
| 697 digitContentNew = '0'; | |
| 698 return digitContentNew; | |
| 699 } | |
| 700 if(action == ACTION_BUTTON_BACK) | |
| 701 { | |
| 702 digitContentNew = digitContent - 1; | |
| 703 if(digitContentNew < '0') | |
| 704 digitContentNew = '9'; | |
| 705 return digitContentNew; | |
| 706 } | |
| 707 | |
| 708 return UNSPECIFIC_RETURN; | |
| 709 } | |
| 710 | |
| 711 /* | |
| 712 uint8_t OnAction_DefaultMix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 713 { | |
| 714 uint32_t newOxygen, newHelium; | |
| 715 uint8_t depthDEFAULT; | |
| 716 char text[32]; | |
| 717 | |
| 718 newOxygen = 21; | |
| 719 newHelium = 0; | |
| 720 | |
| 721 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 722 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 723 | |
| 724 tMenuEdit_newInput(StMOG_Mix, newOxygen, newHelium, 0, 0); | |
| 725 | |
| 726 depthDEFAULT = calc_MOD(editGasPage.gasID); | |
| 727 create_text_with_u8(text, "", depthDEFAULT, "m MOD"); | |
| 728 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 729 | |
| 730 return UPDATE_DIVESETTINGS; | |
| 731 } | |
| 732 | |
| 733 uint8_t OnAction_ToggleDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 734 { | |
| 735 uint8_t depth; | |
| 736 uint32_t newDefaultDepth; | |
| 737 char text[32]; | |
| 738 | |
| 739 if(editGasPage.depth_mode == 0) | |
| 740 { | |
| 741 editGasPage.depth_mode = 1; | |
| 742 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel; | |
| 743 newDefaultDepth = calc_MinOD(editGasPage.gasID); | |
| 744 create_text_with_u8(text, "", newDefaultDepth, "m Min"); | |
| 745 } | |
| 746 else | |
| 747 { | |
| 748 editGasPage.depth_mode = 0; | |
| 749 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter; | |
| 750 newDefaultDepth = calc_MOD(editGasPage.gasID); | |
| 751 create_text_with_u8(text, "", newDefaultDepth, "m MOD"); | |
| 752 } | |
| 753 tMenuEdit_newInput(StMOG_Depth, (uint32_t)depth, 0, 0, 0); | |
| 754 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 755 | |
| 756 return UNSPECIFIC_RETURN; | |
| 757 } | |
| 758 | |
| 759 | |
| 760 uint8_t OnAction_Depth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 761 { | |
| 762 uint8_t digitContentNew; | |
| 763 uint32_t newDepth; | |
| 764 | |
| 765 if(action == ACTION_BUTTON_ENTER) | |
| 766 { | |
| 767 return digitContent; | |
| 768 } | |
| 769 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 770 { | |
| 771 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 772 if(newDepth > 255) | |
| 773 newDepth = 255; | |
| 774 if(editGasPage.depth_mode == 0) | |
| 775 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 776 else | |
| 777 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 778 tMenuEdit_newInput(editId, newDepth, 0, 0, 0); | |
| 779 return UPDATE_DIVESETTINGS; | |
| 780 } | |
| 781 if(action == ACTION_BUTTON_NEXT) | |
| 782 { | |
| 783 digitContentNew = digitContent + 1; | |
| 784 if(digitContentNew > '9') | |
| 785 digitContentNew = '0'; | |
| 786 return digitContentNew; | |
| 787 } | |
| 788 if(action == ACTION_BUTTON_BACK) | |
| 789 { | |
| 790 digitContentNew = digitContent - 1; | |
| 791 if(digitContentNew < '0') | |
| 792 digitContentNew = '9'; | |
| 793 return digitContentNew; | |
| 794 } | |
| 795 | |
| 796 return UNSPECIFIC_RETURN; | |
| 797 } | |
| 798 | |
| 799 | |
| 800 uint8_t OnAction_DefaultDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 801 { | |
| 802 uint32_t newDepth; | |
| 803 | |
| 804 if(editGasPage.depth_mode == 0) | |
| 805 { | |
| 806 newDepth = calc_MOD(editGasPage.gasID); | |
| 807 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 808 } | |
| 809 else | |
| 810 { | |
| 811 newDepth = calc_MinOD(editGasPage.gasID); | |
| 812 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 813 } | |
| 814 | |
| 815 tMenuEdit_newInput(StMOG_Depth, newDepth, 0, 0, 0); | |
| 816 | |
| 817 return UPDATE_DIVESETTINGS; | |
| 818 } | |
| 819 | |
| 820 | |
| 821 uint8_t OnAction_Active(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 822 { | |
| 823 uint8_t active, first; | |
| 824 | |
| 825 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 826 | |
| 827 if(first) | |
| 828 return UNSPECIFIC_RETURN; | |
| 829 | |
| 830 active = editGasPage.pGasLine[editGasPage.gasID].note.ub.active; | |
| 831 | |
| 832 if(active) | |
| 833 { | |
| 834 active = 0; | |
| 835 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 836 } | |
| 837 else | |
| 838 { | |
| 839 active = 1; | |
| 840 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 841 } | |
| 842 tMenuEdit_set_on_off(editId, active); | |
| 843 | |
| 844 return UPDATE_DIVESETTINGS; | |
| 845 } | |
| 846 */ | |
| 847 | |
| 848 | |
| 849 uint8_t OnAction_First(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 850 { | |
| 851 uint8_t first, i, gasOne; | |
| 852 | |
| 853 if(editGasPage.ccr) | |
| 854 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 855 else | |
| 856 gasOne = 1; | |
| 857 | |
| 858 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 859 | |
| 860 if(!first) | |
| 861 { | |
| 862 for(i=gasOne;i<NUM_GASES + gasOne;i++) | |
| 863 { | |
| 864 if(editGasPage.pGasLine[i].note.ub.first) | |
| 865 { | |
| 866 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 867 editGasPage.pGasLine[i].note.ub.active = 0; | |
| 868 } | |
| 869 } | |
| 870 } | |
| 871 | |
| 872 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 1; | |
| 873 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 874 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 875 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
876 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 877 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 878 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 879 | |
| 880 tMenuEdit_set_on_off(StMOG_First, 1); | |
| 881 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 882 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 883 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
884 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
885 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
886 #endif |
| 38 | 887 |
| 888 if(!first) | |
| 889 return UPDATE_DIVESETTINGS; | |
| 890 else | |
| 891 return UPDATE_AND_EXIT_TO_MENU; | |
| 892 } | |
| 893 | |
| 894 | |
| 895 uint8_t OnAction_Deco(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 896 { | |
| 897 uint8_t first, deco, gasOne; | |
| 898 | |
| 899 if(editGasPage.ccr) | |
| 900 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 901 else | |
| 902 gasOne = 1; | |
| 903 | |
| 904 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 905 deco = editGasPage.pGasLine[editGasPage.gasID].note.ub.deco; | |
| 906 | |
| 907 if(first) | |
| 908 { | |
| 909 if(editGasPage.gasID == gasOne) | |
| 910 return UNSPECIFIC_RETURN; | |
| 911 else | |
| 912 { | |
| 913 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 914 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 915 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 916 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 917 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 918 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 919 } | |
| 920 } | |
| 921 | |
| 922 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 923 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 924 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 1; | |
| 925 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
926 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 927 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; |
| 928 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 929 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 930 | |
| 931 /* | |
| 932 if(deco) | |
| 933 { | |
| 934 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 935 tMenuEdit_newInput(StMOG_ChangeDepth, editGasPage.pGasLine[editGasPage.gasID].depth_meter, 0, 0, 0); | |
| 936 } | |
| 937 */ | |
| 938 | |
| 939 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 940 tMenuEdit_set_on_off(StMOG_Deco, 1); | |
| 941 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 942 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
943 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
944 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
945 #endif |
| 38 | 946 |
| 947 if(!deco) | |
| 948 return UPDATE_DIVESETTINGS; | |
| 949 else | |
| 950 return UPDATE_AND_EXIT_TO_MENU; | |
| 951 } | |
| 952 | |
| 953 | |
| 954 uint8_t OnAction_Travel(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 955 { | |
| 956 uint8_t first, travel, gasOne; | |
| 957 | |
| 958 if(editGasPage.ccr) | |
| 959 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 960 else | |
| 961 gasOne = 1; | |
| 962 | |
| 963 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 964 travel = editGasPage.pGasLine[editGasPage.gasID].note.ub.travel; | |
| 965 | |
| 966 if(first) | |
| 967 { | |
| 968 if(editGasPage.gasID == gasOne) | |
| 969 return UNSPECIFIC_RETURN; | |
| 970 else | |
| 971 { | |
| 972 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 973 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 974 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 975 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 976 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 977 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 978 } | |
| 979 } | |
| 980 | |
| 981 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 982 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 983 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 984 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 1; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
985 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 986 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 987 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 988 | |
| 989 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 990 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 991 tMenuEdit_set_on_off(StMOG_Travel, 1); | |
| 992 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
993 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
994 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
995 #endif |
| 38 | 996 |
| 997 if(!travel) | |
| 998 return UPDATE_DIVESETTINGS; | |
| 999 else | |
| 1000 return UPDATE_AND_EXIT_TO_MENU; | |
| 1001 } | |
| 1002 | |
| 1003 | |
| 1004 uint8_t OnAction_Inactive(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1005 { | |
| 1006 uint8_t first, inactive, gasOne; | |
| 1007 | |
| 1008 if(editGasPage.ccr) | |
| 1009 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 1010 else | |
| 1011 gasOne = 1; | |
| 1012 | |
| 1013 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 1014 | |
| 1015 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 1016 inactive = 0; | |
| 1017 else | |
| 1018 inactive = 1; | |
| 1019 | |
| 1020 if(first) | |
| 1021 { | |
| 1022 if(editGasPage.gasID == gasOne) | |
| 1023 return UNSPECIFIC_RETURN; | |
| 1024 else | |
| 1025 { | |
| 1026 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 1027 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 1028 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 1029 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 1030 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 1031 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 1032 } | |
| 1033 } | |
| 1034 | |
| 1035 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 1036 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 1037 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 1038 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1039 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 1040 |
| 1041 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 1042 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 1043 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 1044 tMenuEdit_set_on_off(StMOG_Inactive, 1); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1045 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1046 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1047 #endif |
| 38 | 1048 if(!inactive) |
| 1049 return UPDATE_DIVESETTINGS; | |
| 1050 else | |
| 1051 return UPDATE_AND_EXIT_TO_MENU; | |
| 1052 } | |
| 1053 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1054 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1055 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1056 uint8_t first, off, gasOne; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1057 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1058 if(editGasPage.ccr) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1059 gasOne = 1 + NUM_OFFSET_DILUENT; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1060 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1061 gasOne = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1062 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1063 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1064 off =editGasPage.pGasLine[editGasPage.gasID].note.ub.off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1065 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1066 if(first) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1067 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1068 if(editGasPage.gasID == gasOne) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1069 return UNSPECIFIC_RETURN; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1070 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1071 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1072 editGasPage.pGasLine[gasOne].note.ub.first = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1073 editGasPage.pGasLine[gasOne].note.ub.active = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1074 editGasPage.pGasLine[gasOne].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1075 editGasPage.pGasLine[gasOne].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1076 editGasPage.pGasLine[gasOne].depth_meter = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1077 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1078 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1079 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1080 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1081 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1082 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1083 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1084 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1085 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1086 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1087 tMenuEdit_set_on_off(StMOG_First, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1088 tMenuEdit_set_on_off(StMOG_Deco, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1089 tMenuEdit_set_on_off(StMOG_Travel, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1090 tMenuEdit_set_on_off(StMOG_Inactive, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1091 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1092 tMenuEdit_set_on_off(StMOG_Off, 1); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1093 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1094 if(!off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1095 return UPDATE_DIVESETTINGS; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1096 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1097 return UPDATE_AND_EXIT_TO_MENU; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1098 } |
| 38 | 1099 |
| 1100 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1101 { | |
| 1102 uint8_t newChangeDepth = editGasPage.mod; | |
| 1103 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1104 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.travel) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1105 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1106 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel= newChangeDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1107 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1108 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1109 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1110 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newChangeDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1111 } |
| 38 | 1112 tMenuEdit_newInput(StMOG_ChangeDepth, unit_depth_integer(newChangeDepth), 0, 0, 0); |
| 1113 | |
| 1114 return UPDATE_DIVESETTINGS; | |
| 1115 } | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1116 |
| 38 | 1117 uint8_t OnAction_ChangeDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
| 1118 { | |
| 1119 uint8_t digitContentNew; | |
| 1120 uint32_t newDepth; | |
| 1121 | |
| 1122 if(action == ACTION_BUTTON_ENTER) | |
| 1123 { | |
| 1124 return digitContent; | |
| 1125 } | |
| 1126 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1127 { | |
| 1128 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 1129 if(settingsGetPointer()->nonMetricalSystem != 0) // new hw 170703 | |
| 1130 { | |
| 1131 newDepth += 2; // f�r rundung | |
| 1132 newDepth = (newDepth * 3) / 10; | |
| 1133 } | |
| 1134 if(newDepth > 255) | |
| 1135 newDepth = 255; | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1136 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1137 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.travel) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1138 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1139 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1140 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1141 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1142 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1143 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1144 } |
| 38 | 1145 tMenuEdit_newInput(editId, unit_depth_integer(newDepth), 0, 0, 0); |
| 1146 return UPDATE_DIVESETTINGS; | |
| 1147 } | |
| 1148 if(action == ACTION_BUTTON_NEXT) | |
| 1149 { | |
| 1150 digitContentNew = digitContent + 1; | |
| 1151 if(digitContentNew > '9') | |
| 1152 digitContentNew = '0'; | |
| 1153 return digitContentNew; | |
| 1154 } | |
| 1155 if(action == ACTION_BUTTON_BACK) | |
| 1156 { | |
| 1157 digitContentNew = digitContent - 1; | |
| 1158 if(digitContentNew < '0') | |
| 1159 digitContentNew = '9'; | |
| 1160 return digitContentNew; | |
| 1161 } | |
| 1162 | |
| 1163 return UNSPECIFIC_RETURN; | |
| 1164 } | |
| 1165 | |
| 1166 | |
| 1167 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1168 { | |
| 1169 int8_t digitContentNew; | |
| 1170 uint32_t newBottleSize; | |
| 1171 // const uint8_t validSize = {4,7,8,10,12,15,16,17,20,24,30,40,255}; | |
| 1172 const uint8_t validSize[] = {40,30,24,20,17,16,15,12,10,8,7,4,0}; | |
| 1173 | |
| 1174 if(action == ACTION_BUTTON_ENTER) | |
| 1175 { | |
| 1176 return digitContent; | |
| 1177 } | |
| 1178 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1179 { | |
| 1180 evaluateNewString(editId, &newBottleSize, 0, 0, 0); | |
| 1181 | |
| 1182 if(newBottleSize > validSize[0]) | |
| 1183 newBottleSize = validSize[0]; | |
| 1184 | |
| 1185 editGasPage.pGasLine[editGasPage.gasID].bottle_size_liter = newBottleSize; | |
| 1186 | |
| 1187 tMenuEdit_newInput(editId, newBottleSize, 0, 0, 0); | |
| 1188 return UPDATE_DIVESETTINGS; | |
| 1189 } | |
| 1190 if(action == ACTION_BUTTON_NEXT) | |
| 1191 { | |
| 1192 // new here for ease of comparison | |
| 1193 digitContentNew = digitContent - '0'; | |
| 1194 | |
| 1195 if(digitContentNew > 0) | |
| 1196 { | |
| 1197 int i = 0; | |
| 1198 while(digitContentNew < validSize[i]) | |
| 1199 { | |
| 1200 i++; | |
| 1201 } | |
| 1202 if(i == 0) | |
| 1203 digitContentNew = 0; // off | |
| 1204 else | |
| 1205 digitContentNew = validSize[i-1]; | |
| 1206 } | |
| 1207 else | |
| 1208 { | |
| 1209 int i = 0; | |
| 1210 while(validSize[i] != 0) | |
| 1211 i++; | |
| 1212 digitContentNew = validSize[i-1]; // smallest tank | |
| 1213 } | |
| 1214 digitContentNew += '0'; | |
| 1215 return digitContentNew; | |
| 1216 } | |
| 1217 if(action == ACTION_BUTTON_BACK) | |
| 1218 { | |
| 1219 // new here for ease of comparison | |
| 1220 digitContentNew = digitContent - '0'; | |
| 1221 if(digitContentNew > 0) | |
| 1222 { | |
| 1223 int i = 0; | |
| 1224 while(digitContentNew < validSize[i]) | |
| 1225 { | |
| 1226 i++; | |
| 1227 } | |
| 1228 if(validSize[i] == 0) | |
| 1229 digitContentNew = 0; // off | |
| 1230 else if(validSize[i+1] == 0) | |
| 1231 digitContentNew = 0; // off | |
| 1232 else | |
| 1233 digitContentNew = validSize[i+1]; | |
| 1234 } | |
| 1235 else | |
| 1236 { | |
| 1237 digitContentNew = validSize[0]; | |
| 1238 } | |
| 1239 digitContentNew += '0'; | |
| 1240 | |
| 1241 return digitContentNew; | |
| 1242 } | |
| 1243 return EXIT_TO_MENU; | |
| 1244 } | |
| 1245 | |
| 1246 | |
| 1247 /* Private functions ---------------------------------------------------------*/ | |
| 1248 | |
| 1249 | |
| 1250 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2) | |
| 1251 { | |
| 1252 uint8_t digit1, digit2, digit3, count; | |
| 1253 | |
| 1254 count = 0; | |
| 1255 | |
| 1256 if(*text1) | |
| 1257 { | |
| 1258 strcpy(&text[count], text1); | |
| 1259 count = strlen(text1); | |
| 1260 } | |
| 1261 | |
| 1262 digit1 = inputU8 / 100; | |
| 1263 inputU8 -= digit1 * 100; | |
| 1264 digit2 = inputU8 / 10; | |
| 1265 inputU8 -= digit2 * 10; | |
| 1266 digit3 = inputU8; | |
| 1267 if(digit1) | |
| 1268 text[count++] = '0' + digit1; | |
| 1269 if(count || digit2) | |
| 1270 text[count++] = '0' + digit2; | |
| 1271 text[count++] = '0' + digit3; | |
| 1272 | |
| 1273 if(*text2) | |
| 1274 { | |
| 1275 strcpy(&text[count], text2); | |
| 1276 } | |
| 1277 } |