Mercurial > public > ostc4
annotate Common/Inc/settings.h @ 1024:9fabad6436a2 GasConsumption
GPIO sleep cleanup:
During bringup of OSTC5 HW usage of new GPIO pins was introduced. To avoid not needed active GPIO pins during sleep some cleanup has been done (pins are only active if needed by new hardware, clocks deactivated during sleep etc.)
| author | Ideenmodellierer |
|---|---|
| date | Tue, 29 Jul 2025 17:15:35 +0200 |
| parents | 5924a2d1d3ba |
| children | 158100a84ebd |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/settings.h | |
| 5 /// \brief | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef SETTINGS_H | |
| 28 #define SETTINGS_H | |
| 29 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
30 #include <stdint.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
31 #include <stdbool.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
32 |
| 38 | 33 // From Common/Inc: |
| 34 #include "FirmwareData.h" | |
| 1017 | 35 #include "firmwareEraseProgram.h" |
| 38 | 36 |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
37 #include "global_constants.h" |
| 38 | 38 // From Common/Drivers/ |
| 39 #include "stm32f4xx_hal.h" | |
| 710 | 40 #include "stm32f4xx_hal_rtc.h" |
| 38 | 41 |
| 691 | 42 #include "configuration.h" |
| 43 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
44 |
| 38 | 45 #define NUM_GASES 5 |
| 46 #define NUM_OFFSET_DILUENT 5 | |
| 47 #define SPECIAL_GAS_ID 0 | |
|
864
fa431d42b5fb
Fix incorrect logging of bailout to Open Circuit when using the best gas.
heinrichsweikamp
parents:
819
diff
changeset
|
48 #define NO_GAS_ID 255 |
| 38 | 49 |
| 50 #define ERROR_ 0xFF | |
| 51 | |
| 52 #define CCRMODE_FixedSetpoint 0 | |
| 53 #define CCRMODE_Sensors 1 | |
| 662 | 54 #define CCRMODE_Simulation 2 |
| 38 | 55 |
| 56 #define DIVEMODE_OC 0 | |
| 57 #define DIVEMODE_CCR 1 | |
| 58 #define DIVEMODE_Gauge 2 | |
| 59 #define DIVEMODE_Apnea 3 | |
| 662 | 60 #define DIVEMODE_PSCR 4 |
| 38 | 61 |
| 62 #define GF_MODE 1 | |
| 63 #define VPM_MODE 2 | |
| 64 | |
| 65 #define VPM_FROM_FORTRAN 0 | |
| 66 #define VPM_BACHELORWORK 1 | |
| 67 | |
| 68 #define BUEHLMANN_OSTC4 0 | |
| 69 #define BUEHLMANN_hwOS 1 | |
| 70 | |
| 71 #define MMDDYY 0 | |
| 72 #define DDMMYY 1 | |
| 73 #define YYMMDD 2 | |
| 74 | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
75 #define PRESSURE_OFFSET_LIMIT_MBAR 50 |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
76 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
77 #define MAX_COMPASS_COMP (2u) |
|
993
df052f0347fb
Add settings that have been missing in the bluetooth API:
heinrichsweikamp
parents:
982
diff
changeset
|
78 |
|
df052f0347fb
Add settings that have been missing in the bluetooth API:
heinrichsweikamp
parents:
982
diff
changeset
|
79 #define MAX_COMPASS_DECLINATION_DEG 99 |
|
df052f0347fb
Add settings that have been missing in the bluetooth API:
heinrichsweikamp
parents:
982
diff
changeset
|
80 |
| 640 | 81 #define MAX_VIEWPORT_MODE (0x7F) |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
82 |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
83 #define MAX_SCRUBBER_TIME (999u) |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
84 #define MIN_SCRUBBER_TIME -99 |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
85 #define SCRUBBER_WARNING_TIME 30 |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
86 #define SCRUBBER_ERROR_TIME 0 |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
87 |
| 652 | 88 #define MIN_PPO2_SP_CBAR (40u) |
| 650 | 89 |
| 662 | 90 #define PSCR_MAX_O2_DROP (15u) |
| 91 #define PSCR_MIN_LUNG_RATIO (5u) | |
| 92 #define PSCR_MAX_LUNG_RATIO (20u) | |
| 93 | |
| 691 | 94 #define UART_MAX_PROTOCOL (2u) |
| 95 | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
96 #define FUTURE_SPARE_SIZE (0u) /* Applied for reuse of old, not used, scooter block (was 32 bytes)*/ |
| 662 | 97 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
98 typedef enum |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
99 { |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
100 O2_SENSOR_SOURCE_OPTIC = 0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
101 O2_SENSOR_SOURCE_ANALOG, |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
102 O2_SENSOR_SOURCE_DIGITAL, |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
103 O2_SENSOR_SOURCE_ANADIG, |
| 691 | 104 #ifdef ENABLE_SENTINEL_MODE |
| 105 O2_SENSOR_SOURCE_SENTINEL, | |
| 106 #endif | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
107 O2_SENSOR_SOURCE_MAX |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
108 } SensorSource; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
109 #define MAX_O2_SENSOR_SOURCE (2u) |
| 546 | 110 |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
111 typedef enum |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
112 { |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
113 INVALID_SCRUB_TIMER_OFF = 0, |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
114 SCRUB_TIMER_MINUTES, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
115 SCRUB_TIMER_PERCENT, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
116 SCRUB_TIMER_END |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
117 } ScrubTimerMode_e; |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
118 |
| 38 | 119 /* 2015 Jan 30, hw, deco and travel added for MenuEditGas |
| 120 * can be used for buehlmann, vpm, etc. later but be carefull | |
| 121 * with current implemenation */ | |
| 122 typedef struct{ | |
| 123 uint8_t active:1; | |
| 124 uint8_t first:1; | |
| 125 uint8_t deco:1; | |
| 126 uint8_t travel:1; | |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
127 uint8_t off:1; |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
819
diff
changeset
|
128 uint8_t spare:2; |
| 38 | 129 } gasubit8_t; |
| 130 | |
| 131 typedef union{ | |
| 132 gasubit8_t ub; | |
| 133 uint8_t uw; | |
| 134 } gasbit8_Type; | |
| 135 | |
| 136 typedef struct{ | |
| 137 uint8_t standard:4; | |
| 138 uint8_t alternative:4; | |
| 139 } ubit2x4_t; | |
| 140 | |
| 141 typedef union{ | |
| 142 ubit2x4_t ub; | |
| 143 uint8_t uw; | |
| 144 } split2x4_Type; | |
| 145 | |
| 146 typedef union{ | |
| 147 uint8_t u8[4]; | |
| 148 uint32_t u32; | |
| 149 } general32to8_Type; | |
| 150 | |
| 151 typedef struct | |
| 152 { | |
| 153 uint8_t oxygen_percentage; | |
| 154 uint8_t helium_percentage; | |
| 155 gasbit8_Type note; | |
| 156 uint8_t depth_meter; | |
| 157 uint8_t depth_meter_travel; | |
| 158 uint8_t bottle_size_liter; | |
| 159 // uint8_t bottle_wireless_status; | |
| 160 uint16_t bottle_wireless_id; | |
| 161 } SGasLine; | |
| 162 | |
| 163 typedef struct | |
| 164 { | |
| 165 uint8_t setpoint_cbar; | |
| 166 uint8_t depth_meter; | |
| 167 gasbit8_Type note; | |
| 168 } SSetpointLine; | |
| 169 | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
170 |
| 710 | 171 typedef struct |
| 172 { | |
| 173 uint16_t TimerMax; | |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
174 int16_t TimerCur; |
| 710 | 175 RTC_DateTypeDef lastDive; |
| 176 } SScrubberData; | |
| 177 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
178 enum { |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
179 SETPOINT_INDEX_CUSTOM = 0, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
180 SETPOINT_INDEX_AUTO_LOW, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
181 SETPOINT_INDEX_AUTO_HIGH, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
182 SETPOINT_INDEX_AUTO_DECO, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
183 }; |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
184 |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
185 typedef struct |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
186 { |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
187 uint8_t FirstCorrection; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
188 uint8_t Corrections; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
189 } SSettingsStatus; |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
190 |
| 949 | 191 |
| 192 typedef struct | |
| 193 { | |
| 194 int8_t hours; | |
| 195 uint8_t minutes; | |
| 196 } StimeZone; | |
| 197 | |
| 198 | |
| 38 | 199 /* SSettings |
| 200 * gas[0] and setpoint[0] are the special ones configurable during the dive | |
| 201 */ | |
| 202 typedef struct | |
| 203 { | |
| 204 uint32_t header; | |
| 205 uint8_t warning_blink_dsec; | |
| 206 uint8_t lastDiveLogId; | |
| 207 uint32_t logFlashNextSampleStartAddress; | |
| 208 SGasLine gas[1 + (2*NUM_GASES)]; | |
| 209 SSetpointLine setpoint[1 + NUM_GASES]; | |
| 210 uint8_t CCR_Mode; | |
| 211 uint8_t dive_mode; | |
| 212 split2x4_Type deco_type; | |
| 213 uint8_t ppO2_max_deco; | |
| 214 uint8_t ppO2_max_std; | |
| 215 uint8_t ppO2_min; | |
| 216 uint8_t CNS_max; | |
| 217 uint8_t ascent_MeterPerMinute_max; | |
| 218 uint8_t ascent_MeterPerMinute_showGraph; | |
| 219 uint8_t future_TTS; | |
| 220 uint8_t GF_high; | |
| 221 uint8_t GF_low; | |
| 222 uint8_t aGF_high; | |
| 223 uint8_t aGF_low; | |
| 224 split2x4_Type VPM_conservatism; | |
| 225 uint8_t safetystopDuration; | |
| 226 uint8_t AtemMinutenVolumenLiter; | |
| 227 uint8_t ReserveFractionDenominator; | |
| 228 uint8_t salinity; | |
| 229 uint8_t last_stop_depth_meter; | |
| 230 uint8_t stop_increment_depth_meter; | |
| 231 uint8_t brightness; | |
| 232 uint8_t date_format; | |
| 233 uint8_t selected_language; | |
| 234 char customtext[60]; | |
| 235 uint16_t timeoutSurfacemode; | |
| 236 uint8_t timeoutMenuSurface; | |
| 237 uint8_t timeoutMenuDive; | |
| 238 uint8_t timeoutMenuEdit; | |
| 239 uint8_t timeoutInfo; | |
| 240 uint8_t timeoutInfoCompass; | |
| 241 uint8_t design; | |
| 242 uint16_t timeoutDiveReachedZeroDepth; | |
| 243 uint16_t divetimeToCreateLogbook; | |
| 244 uint8_t serialHigh; | |
| 245 uint8_t serialLow; | |
| 246 // SUFirmware firmwareVersion16to32bit; | |
| 247 uint32_t backup_localtime_rtc_tr; | |
| 248 uint32_t backup_localtime_rtc_dr; | |
| 249 uint16_t totalDiveCounter; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
250 uint16_t personalDiveCount; |
| 38 | 251 uint8_t showDebugInfo; |
| 252 uint8_t ButtonResponsiveness[4];// changed content in 0xFFFF0016 | |
| 253 uint8_t nonMetricalSystem; | |
| 254 uint8_t fallbackToFixedSetpoint; | |
| 255 uint8_t bluetoothActive; /* will be set to zero on each startup at the moment */ | |
| 256 uint8_t safetystopDepth; | |
| 257 uint32_t updateSettingsAllowedFromHeader; | |
| 662 | 258 uint8_t pscr_lung_ratio; /* redefined in 0xFFFF0020 */ |
| 259 uint8_t pscr_o2_drop; /* redefined in 0xFFFF0020 */ | |
| 260 uint8_t co2_sensor_active; /* redefined in 0xFFFF0021 */ | |
| 691 | 261 uint8_t ext_uart_protocol; /* redefined in 0xFFFF0022 */ |
| 710 | 262 |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
263 uint8_t scrubberActiveId; /* redefined in 0xFFFF0023 */ |
| 710 | 264 SScrubberData scrubberData[2]; |
| 796 | 265 uint8_t ext_sensor_map_Obsolete[5]; |
| 266 uint8_t buttonLockActive; /* redefined in 0xFFFF0025 */ | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
267 int8_t compassDeclinationDeg; |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
268 uint8_t delaySetpointLow; |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
269 uint16_t timerDurationS; /* redefined in 0xFFFF0026 */ |
| 662 | 270 uint8_t Future_SPARE[FUTURE_SPARE_SIZE]; /* redefined in 0xFFFF0020 (old scooter Block was 32 byte)*/ |
| 38 | 271 // new in 0xFFFF0006 |
| 272 uint8_t ppo2sensors_deactivated; | |
| 273 uint8_t tX_colorscheme; | |
| 274 uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 275 uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 276 uint8_t tX_customViewPrimary; | |
| 277 uint8_t tX_customViewTimeout; | |
| 278 uint8_t timeoutEnterButtonSelectDive; | |
| 279 uint16_t logbookOffset; | |
| 280 uint8_t alwaysShowPPO2; | |
| 281 uint8_t extraDisplay; | |
| 282 uint16_t display_toogle_desc; | |
| 283 int8_t offsetPressure_mbar; | |
| 284 int8_t offsetTemperature_centigrad; | |
| 285 uint8_t gasConsumption_travel_l_min; | |
| 286 uint8_t gasConsumption_bottom_l_min; | |
| 287 uint8_t gasConsumption_deco_l_min; | |
| 288 uint8_t debugModeOnStart; | |
| 289 uint8_t IAmStolenPleaseKillMe; | |
| 290 int16_t compassBearing; | |
| 291 uint8_t lastKnownBatteryPercentage; | |
| 292 uint8_t buttonBalance[3]; // 0 = right, 1 = center, 2 = left | |
| 293 uint8_t firmwareVersion[4]; | |
| 294 uint16_t timeoutSurfacemodeWithSensors; | |
| 295 // new in 0xFFFF0016 | |
| 296 uint8_t VPM_model; | |
| 297 uint8_t GF_model; | |
| 298 // new in 0xFFFF0017 | |
| 299 uint8_t FactoryButtonBase; | |
| 300 uint8_t FactoryButtonBalance[3]; | |
|
112
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
301 /* new in 0xFFFF0018 */ |
|
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
302 uint8_t FlipDisplay; |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
303 /* new in 0xFFFF0019 */ |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
304 uint32_t cv_configuration; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
305 /* new in 0xFFFF001A */ |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
306 uint8_t MotionDetection; |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
307 /* new in 0xFFFF001B */ |
|
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
308 uint32_t cv_config_BigScreen; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
309 /* new in 0xFFFF001C */ |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
310 uint8_t compassInertia; |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
539
diff
changeset
|
311 uint8_t tX_customViewPrimaryBF; |
| 546 | 312 /* new in 0xFFFF001D */ |
|
626
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
567
diff
changeset
|
313 uint8_t viewPortMode; /* 7-Reserve| 6..5 - Focus spot size | 4-Focusframe | 3-Reserve | 2..0-BacklightBoost */ |
| 546 | 314 uint16_t viewRoll; |
| 315 uint16_t viewPitch; | |
| 316 uint16_t viewYaw; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
317 /* new in 0xFFFF001E */ |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
318 uint8_t ppo2sensors_source; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
319 float ppo2sensors_calibCoeff[3]; |
| 567 | 320 uint8_t amPMTime; |
| 650 | 321 /* new in 0xFFFF001F */ |
| 322 uint8_t autoSetpoint; | |
| 710 | 323 uint16_t scrubTimerMax_Obsolete; /* have been replaced with new scrubber data format */ |
| 324 uint16_t scrubTimerCur_Obsolete; /* have been replaced with new scrubber data format */ | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
325 uint8_t scrubTimerMode; |
| 796 | 326 uint8_t ext_sensor_map[8]; /* redefined in 0xFFFF0027 */ |
|
834
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
830
diff
changeset
|
327 uint8_t cvAutofocus; |
| 882 | 328 uint8_t slowExitTime; |
| 949 | 329 /* new in 0xFFFF002c */ |
| 330 StimeZone timeZone; | |
| 951 | 331 uint8_t warningBuzzer; |
| 38 | 332 } SSettings; |
| 333 | |
| 334 uint8_t writeData(uint8_t *); | |
| 335 uint8_t readData(uint8_t what,uint8_t *); | |
| 336 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data); | |
| 337 | |
| 338 uint8_t getPPO2Max(void); | |
| 339 uint8_t getPPO2Min(void); | |
| 340 uint8_t getDiveMode(void); | |
| 341 uint8_t getCCRMode(void); | |
| 342 uint8_t getDecoType(void); | |
| 343 uint8_t getFutureTTS(void); | |
| 344 | |
| 345 SSettings* settingsGetPointer(void); | |
| 346 const SSettings* settingsGetPointerStandard(void); | |
| 347 void set_settings_to_Standard(void); | |
| 348 void mod_settings_for_first_start_with_empty_ext_flash(void); | |
| 349 const SFirmwareData* firmwareDataGetPointer(void); | |
| 350 const SHardwareData* hardwareDataGetPointer(void); | |
| 351 uint8_t firmwareVersion_16bit_high(void); | |
| 352 uint8_t firmwareVersion_16bit_low(void); | |
| 353 void hardwareBatchCode(uint8_t *high, uint8_t *low); | |
| 354 | |
| 355 uint8_t RTEminimum_required_high(void); | |
| 356 uint8_t RTEminimum_required_low(void); | |
| 357 uint8_t FONTminimum_required_high(void); | |
| 358 uint8_t FONTminimum_required_low(void); | |
| 359 | |
| 360 void setActualRTEversion(uint8_t high, uint8_t low); | |
| 361 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow); | |
| 362 | |
|
993
df052f0347fb
Add settings that have been missing in the bluetooth API:
heinrichsweikamp
parents:
982
diff
changeset
|
363 void setFlipDisplay(uint8_t flipDisplay); |
| 38 | 364 void set_new_settings_missing_in_ext_flash(void); |
| 365 uint8_t check_and_correct_settings(void); | |
| 366 uint8_t newFirmwareVersionCheckViaSettings(void); | |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
758
diff
changeset
|
367 void set_settings_button_to_factory_with_individual_buttonBalance(void); |
| 38 | 368 uint8_t getLicence(void); |
| 369 void firmwareGetDate(RTC_DateTypeDef *SdateOutput); | |
| 370 | |
| 371 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 372 | |
| 373 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray); | |
| 374 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray); | |
| 375 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray); | |
| 376 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray); | |
| 377 | |
| 378 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 379 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage); | |
| 380 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC); | |
| 381 | |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
382 void get_CorrectionStatus(SSettingsStatus* Status); |
| 662 | 383 void reset_SettingWarning(); |
| 384 uint8_t isSettingsWarning(); | |
| 385 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
386 bool checkAndFixSetpointSettings(void); |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
387 |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
388 bool isScrubberWarning(const SScrubberData *scrubberData); |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
993
diff
changeset
|
389 bool isScrubberError(const SScrubberData *scrubberData); |
| 38 | 390 #endif // SETTINGS_H |