Mercurial > public > ostc4
annotate Discovery/Src/check_warning.c @ 496:9623f166b0c0
Bugfix display of disabled screen.
It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION.
Changed setting of compass circle position from constant position to variable
This was needed to reuse the same function in several views with different compass position
Added new views Navigation and Depth data
Both views were basically already available but the idea behind the layout is to combine all information needed for navigation dives (compass + timer) in one view. The classic maxdepth view just showed the maxdepth with a black box on the right side. this box is now used for display of average depth (shown in classic view Stopwatch)
Minor changes in compass paint function to improve code readability
Use same Y offset for all views
While switching across the views some number were shown ~20 pixel higher than others. This was caused by the usage of the line selection which works for some fonts but not for all => set linenumber to 0 for all views
| author | Ideenmodellierer |
|---|---|
| date | Mon, 24 Aug 2020 19:53:27 +0200 |
| parents | 58200d756365 |
| children | d97f0e395058 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file check_warning.c | |
| 4 * @author heinrichs weikamp gmbh | |
| 5 * @date 17-Nov-2014 | |
| 6 * @version V0.0.1 | |
| 7 * @since 17-Nov-2014 | |
| 8 * @brief check and set warnings for warnings | |
| 9 * | |
| 10 @verbatim | |
| 11 ============================================================================== | |
| 12 ##### How to use ##### | |
| 13 ============================================================================== | |
| 14 OSTC3 Warnings: | |
| 15 niedriger Batteriezustand ( | |
| 16 zu hoher oder zu niedriger Sauerstoffpartialdruck (ppO2) 0.2 - 1.6 | |
| 17 zu hoher CNS (Gefahr der Sauerstoffvergiftung) 90% | |
| 18 zu hohe Gradientenfaktoren 90 - 90 | |
| 19 Missachtung der Dekostopps (der �berschrittene Dekostopp wird rot angezeigt) 0 m | |
| 20 zu hohe Aufstiegsgeschwindigkeit 30 m/min | |
| 21 aGF-Warnung: die Berechnung der Dekompression wird �ber alternative GF-Werte durchgef�hrt | |
| 22 Fallback-Warnung bei ausgefallenem Sensor | |
| 23 | |
| 24 @endverbatim | |
| 25 ****************************************************************************** | |
| 26 * @attention | |
| 27 * | |
| 28 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 29 * | |
| 30 ****************************************************************************** | |
| 31 */ | |
| 32 | |
| 33 /* Includes ------------------------------------------------------------------*/ | |
| 34 | |
| 35 #include "data_exchange.h" | |
| 36 #include "check_warning.h" | |
| 37 #include "settings.h" | |
| 38 #include "decom.h" | |
| 39 #include "tCCR.h" | |
| 40 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
41 /* Private variables with access ----------------------------------------------*/ |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
42 static uint8_t betterGasId = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
43 static uint8_t betterSetpointId = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
44 static int8_t fallback = 0; |
| 38 | 45 |
| 46 /* Private function prototypes -----------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
47 static int8_t check_fallback(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
48 static int8_t check_ppO2(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
49 static int8_t check_O2_sensors(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
50 static int8_t check_CNS(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
51 static int8_t check_Deco(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
52 static int8_t check_AscentRate(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
53 static int8_t check_aGF(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
54 static int8_t check_BetterGas(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
55 static int8_t check_BetterSetpoint(SDiveState * pDiveState); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
56 static int8_t check_Battery(SDiveState * pDiveState); |
|
478
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
57 #ifdef ENABLE_BOTTLE_SENSOR |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
58 static int8_t check_pressureSensor(SDiveState * pDiveState); |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
59 #endif |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
60 static int8_t check_helper_same_oxygen_and_helium_content(SGasLine * gas1, SGasLine * gas2); |
| 38 | 61 |
| 62 /* Exported functions --------------------------------------------------------*/ | |
| 63 | |
| 64 void check_warning(void) | |
| 65 { | |
|
272
74a8296a2318
cleanup: simplify stateUsed usage
Jan Mulder <jlmulder@xs4all.nl>
parents:
268
diff
changeset
|
66 check_warning2(stateUsedWrite); |
| 38 | 67 } |
| 68 | |
| 69 | |
| 70 void check_warning2(SDiveState * pDiveState) | |
| 71 { | |
| 72 pDiveState->warnings.numWarnings = 0; | |
| 73 | |
| 74 pDiveState->warnings.numWarnings += check_aGF(pDiveState); | |
| 75 pDiveState->warnings.numWarnings += check_AscentRate(pDiveState); | |
| 76 pDiveState->warnings.numWarnings += check_CNS(pDiveState); | |
| 77 pDiveState->warnings.numWarnings += check_Deco(pDiveState); | |
| 78 pDiveState->warnings.numWarnings += check_ppO2(pDiveState); | |
| 79 pDiveState->warnings.numWarnings += check_O2_sensors(pDiveState); | |
| 80 pDiveState->warnings.numWarnings += check_BetterGas(pDiveState); | |
| 81 pDiveState->warnings.numWarnings += check_BetterSetpoint(pDiveState); | |
| 82 pDiveState->warnings.numWarnings += check_Battery(pDiveState); | |
| 83 pDiveState->warnings.numWarnings += check_fallback(pDiveState); | |
|
478
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
84 #ifdef ENABLE_BOTTLE_SENSOR |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
85 pDiveState->warnings.numWarnings += check_pressureSensor(pDiveState); |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
86 #endif |
| 38 | 87 } |
| 88 | |
| 89 | |
| 90 void set_warning_fallback(void) | |
| 91 { | |
| 92 fallback = 1; | |
| 93 } | |
| 94 | |
| 95 | |
| 96 void clear_warning_fallback(void) | |
| 97 { | |
| 98 fallback = 0; | |
| 99 } | |
| 100 | |
| 101 | |
| 102 uint8_t actualBetterGasId(void) | |
| 103 { | |
| 104 return betterGasId; | |
| 105 } | |
| 106 | |
| 107 | |
| 108 uint8_t actualBetterSetpointId(void) | |
| 109 { | |
| 110 return betterSetpointId; | |
| 111 } | |
| 112 | |
| 113 | |
| 114 uint8_t actualLeftMaxDepth(const SDiveState * pDiveState) | |
| 115 { | |
| 116 if(pDiveState->lifeData.depth_meter > (pDiveState->lifeData.max_depth_meter - 3.0f)) | |
| 117 return 0; | |
| 118 else | |
| 119 return 1; | |
| 120 } | |
| 121 | |
| 122 | |
| 123 /* Private functions ---------------------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
124 static int8_t check_fallback(SDiveState * pDiveState) |
| 38 | 125 { |
| 126 if(fallback && ((pDiveState->mode != MODE_DIVE) || (pDiveState->diveSettings.diveMode != DIVEMODE_CCR))) | |
| 127 fallback = 0; | |
| 128 | |
| 129 pDiveState->warnings.fallback = fallback; | |
| 130 return pDiveState->warnings.fallback; | |
| 131 } | |
| 132 | |
| 133 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
134 static int8_t check_ppO2(SDiveState * pDiveState) |
| 38 | 135 { |
| 136 if(pDiveState->mode != MODE_DIVE) | |
| 137 { | |
| 138 pDiveState->warnings.ppO2Low = 0; | |
| 139 pDiveState->warnings.ppO2High = 0; | |
| 140 return 0; | |
| 141 } | |
| 142 | |
| 143 uint8_t localPPO2, testPPO2high; | |
| 144 | |
| 145 if(pDiveState->lifeData.ppO2 < 0) | |
| 146 localPPO2 = 0; | |
| 147 else | |
| 148 if(pDiveState->lifeData.ppO2 >= 2.5f) | |
| 149 localPPO2 = 255; | |
| 150 else | |
| 151 localPPO2 = (uint8_t)(pDiveState->lifeData.ppO2 * 100); | |
| 152 | |
| 153 if((localPPO2 + 1) <= settingsGetPointer()->ppO2_min) | |
| 154 pDiveState->warnings.ppO2Low = 1; | |
| 155 else | |
| 156 pDiveState->warnings.ppO2Low = 0; | |
| 157 | |
| 158 if(actualLeftMaxDepth(pDiveState)) | |
| 159 testPPO2high = settingsGetPointer()->ppO2_max_deco; | |
| 160 else | |
| 161 testPPO2high = settingsGetPointer()->ppO2_max_std; | |
| 162 | |
| 163 if(localPPO2 >= (testPPO2high + 1)) | |
| 164 pDiveState->warnings.ppO2High = 1; | |
| 165 else | |
| 166 pDiveState->warnings.ppO2High = 0; | |
| 167 | |
| 168 return pDiveState->warnings.ppO2Low + pDiveState->warnings.ppO2High; | |
| 169 } | |
| 170 | |
| 171 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
172 static int8_t check_O2_sensors(SDiveState * pDiveState) |
| 38 | 173 { |
| 174 pDiveState->warnings.sensorLinkLost = 0; | |
| 175 pDiveState->warnings.sensorOutOfBounds[0] = 0; | |
| 176 pDiveState->warnings.sensorOutOfBounds[1] = 0; | |
| 177 pDiveState->warnings.sensorOutOfBounds[2] = 0; | |
| 178 | |
| 179 if((pDiveState->diveSettings.diveMode == DIVEMODE_CCR) && (pDiveState->diveSettings.CCR_Mode == CCRMODE_Sensors)) | |
| 180 { | |
| 181 if(!get_HUD_battery_voltage_V()) | |
| 182 pDiveState->warnings.sensorLinkLost = 1; | |
| 183 | |
| 184 test_HUD_sensor_values_outOfBounds(&pDiveState->warnings.sensorOutOfBounds[0], &pDiveState->warnings.sensorOutOfBounds[1], &pDiveState->warnings.sensorOutOfBounds[2]); | |
| 185 | |
| 186 } | |
| 187 return pDiveState->warnings.sensorLinkLost | |
| 188 + pDiveState->warnings.sensorOutOfBounds[0] | |
| 189 + pDiveState->warnings.sensorOutOfBounds[1] | |
| 190 + pDiveState->warnings.sensorOutOfBounds[2]; | |
| 191 } | |
| 192 | |
| 193 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
194 static int8_t check_BetterGas(SDiveState * pDiveState) |
| 38 | 195 { |
| 196 if(stateUsed->mode != MODE_DIVE) | |
| 197 { | |
| 198 pDiveState->warnings.betterGas = 0; | |
| 199 betterGasId = 0; | |
| 200 return 0; | |
| 201 } | |
| 202 | |
| 203 uint8_t gasIdOffset; | |
| 204 uint8_t bestGasDepth, betterGasIdLocal; | |
| 205 | |
| 206 SLifeData* pLifeData = &pDiveState->lifeData; | |
| 207 SDiveSettings* pDiveSettings = &pDiveState->diveSettings; | |
| 208 | |
| 209 pDiveState->warnings.betterGas = 0; | |
| 210 betterGasId = 0; | |
| 211 betterGasIdLocal = pLifeData->actualGas.GasIdInSettings; | |
| 212 bestGasDepth = 255; | |
| 213 | |
| 214 if(pDiveSettings->diveMode == DIVEMODE_CCR) | |
| 215 gasIdOffset = NUM_OFFSET_DILUENT; | |
| 216 else | |
| 217 gasIdOffset = 0; | |
| 218 | |
| 219 /* life data is float, gas data is uint8 */ | |
| 220 if(actualLeftMaxDepth(pDiveState)) /* deco gases */ | |
| 221 { | |
| 222 for(int i=1+gasIdOffset; i<= 5+gasIdOffset; i++) | |
| 223 { | |
| 224 if( (pDiveSettings->gas[i].note.ub.active) | |
| 225 && (pDiveSettings->gas[i].note.ub.deco) | |
| 226 && (pDiveSettings->gas[i].depth_meter) | |
| 227 && (pDiveSettings->gas[i].depth_meter >= (pLifeData->depth_meter - 0.01f )) | |
| 228 && (pDiveSettings->gas[i].depth_meter <= bestGasDepth) | |
| 229 ) | |
| 230 { | |
| 231 betterGasIdLocal = i; | |
| 232 bestGasDepth = pDiveSettings->gas[i].depth_meter; | |
| 233 } | |
| 234 } | |
| 235 | |
| 236 if(betterGasIdLocal != pLifeData->actualGas.GasIdInSettings) | |
| 237 { | |
| 238 if(!check_helper_same_oxygen_and_helium_content(&pDiveSettings->gas[betterGasIdLocal], &pDiveSettings->gas[pLifeData->actualGas.GasIdInSettings])) | |
| 239 { | |
| 240 betterGasId = betterGasIdLocal; | |
| 241 pDiveState->warnings.betterGas = 1; | |
| 242 } | |
| 243 } | |
| 244 } | |
| 245 else /* travel gases */ | |
| 246 { | |
| 247 bestGasDepth = 0; | |
| 248 //check for travalgas | |
| 249 for(int i=1+gasIdOffset; i<= 5+gasIdOffset; i++) | |
| 250 { | |
| 251 if( (pDiveSettings->gas[i].note.ub.active) | |
| 252 && (pDiveSettings->gas[i].note.ub.travel) | |
| 253 && (pDiveSettings->gas[i].depth_meter_travel) | |
| 254 && (pDiveSettings->gas[i].depth_meter_travel <= (pLifeData->depth_meter + 0.01f )) | |
| 255 && (pDiveSettings->gas[i].depth_meter_travel >= bestGasDepth) | |
| 256 ) | |
| 257 { | |
| 258 betterGasIdLocal = i; | |
| 259 bestGasDepth = pDiveSettings->gas[i].depth_meter; | |
| 260 } | |
| 261 } | |
| 262 | |
| 263 if(betterGasIdLocal != pLifeData->actualGas.GasIdInSettings) | |
| 264 { | |
| 265 if(!check_helper_same_oxygen_and_helium_content(&pDiveSettings->gas[betterGasIdLocal], &pDiveSettings->gas[pLifeData->actualGas.GasIdInSettings])) | |
| 266 { | |
| 267 betterGasId = betterGasIdLocal; | |
| 268 pDiveState->warnings.betterGas = 1; | |
| 269 } | |
| 270 } | |
| 271 } | |
| 272 return pDiveState->warnings.betterGas; | |
| 273 } | |
| 274 | |
| 275 /* check for better travel!!! setpoint hw 151210 | |
| 276 */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
277 static int8_t check_BetterSetpoint(SDiveState * pDiveState) |
| 38 | 278 { |
| 279 pDiveState->warnings.betterSetpoint = 0; | |
| 280 betterSetpointId = 0; | |
| 281 | |
| 282 if((stateUsed->mode != MODE_DIVE) || (pDiveState->diveSettings.diveMode != DIVEMODE_CCR) || (pDiveState->diveSettings.CCR_Mode != CCRMODE_FixedSetpoint)) | |
| 283 { | |
| 284 return 0; | |
| 285 } | |
| 286 | |
| 287 uint8_t bestSetpointDepth = 0; // travel the deeper, the better | |
| 288 uint8_t betterSetpointIdLocal = 0; // nothing better | |
| 289 | |
| 290 if(!actualLeftMaxDepth(pDiveState)) /* travel gases */ | |
| 291 { | |
| 292 for(int i=1; i<=NUM_GASES; i++) | |
| 293 { | |
| 294 if( (pDiveState->diveSettings.setpoint[i].note.ub.active) | |
| 295 && (pDiveState->diveSettings.setpoint[i].depth_meter) | |
| 296 && (pDiveState->diveSettings.setpoint[i].depth_meter <= ( pDiveState->lifeData.depth_meter + 0.01f )) | |
| 297 && (pDiveState->diveSettings.setpoint[i].depth_meter >= bestSetpointDepth) | |
| 298 ) | |
| 299 { | |
| 300 betterSetpointIdLocal = i; | |
| 301 bestSetpointDepth = pDiveState->diveSettings.setpoint[i].depth_meter; | |
| 302 } | |
| 303 } | |
| 304 if((betterSetpointIdLocal) && (pDiveState->diveSettings.setpoint[betterSetpointIdLocal].setpoint_cbar != pDiveState->lifeData.actualGas.setPoint_cbar)) | |
| 305 { | |
| 306 betterSetpointId = betterSetpointIdLocal; | |
| 307 pDiveState->warnings.betterSetpoint = 1; | |
| 308 } | |
| 309 } | |
| 310 return pDiveState->warnings.betterSetpoint; | |
| 311 } | |
| 312 | |
| 313 | |
| 314 /* hw 151030 | |
| 315 */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
316 static int8_t check_helper_same_oxygen_and_helium_content(SGasLine * gas1, SGasLine * gas2) |
| 38 | 317 { |
| 318 if(gas1->helium_percentage != gas2->helium_percentage) | |
| 319 return 0; | |
| 320 else | |
| 321 if(gas1->oxygen_percentage != gas2->oxygen_percentage) | |
| 322 return 0; | |
| 323 else | |
| 324 return 1; | |
| 325 } | |
| 326 | |
| 327 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
328 static int8_t check_CNS(SDiveState * pDiveState) |
| 38 | 329 { |
| 330 if(stateUsed->mode != MODE_DIVE) | |
| 331 { | |
| 332 pDiveState->warnings.cnsHigh = 0; | |
| 333 return 0; | |
| 334 } | |
| 335 | |
| 336 if(pDiveState->lifeData.cns >= (float)(settingsGetPointer()->CNS_max)) | |
| 337 pDiveState->warnings.cnsHigh = 1; | |
| 338 else | |
| 339 pDiveState->warnings.cnsHigh = 0; | |
| 340 return pDiveState->warnings.cnsHigh; | |
| 341 } | |
| 342 | |
| 343 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
344 static int8_t check_Battery(SDiveState * pDiveState) |
| 38 | 345 { |
| 346 if(pDiveState->lifeData.battery_charge < 10) | |
| 347 pDiveState->warnings.lowBattery = 1; | |
| 348 else | |
| 349 pDiveState->warnings.lowBattery = 0; | |
| 350 | |
| 351 return pDiveState->warnings.lowBattery; | |
| 352 } | |
| 353 | |
| 354 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
355 static int8_t check_Deco(SDiveState * pDiveState) |
| 38 | 356 { |
| 357 if(stateUsed->mode != MODE_DIVE) | |
| 358 { | |
| 359 pDiveState->warnings.decoMissed = 0; | |
| 360 return 0; | |
| 361 } | |
| 362 | |
| 363 uint8_t depthNext = decom_get_actual_deco_stop(pDiveState); | |
| 364 | |
| 365 if(!depthNext) | |
| 366 pDiveState->warnings.decoMissed = 0; | |
| 367 else | |
| 368 if(pDiveState->lifeData.depth_meter + 0.1f < (float)depthNext) | |
| 369 pDiveState->warnings.decoMissed = 1; | |
| 370 else | |
| 371 pDiveState->warnings.decoMissed = 0; | |
| 372 | |
| 373 return pDiveState->warnings.decoMissed; | |
| 374 } | |
| 375 | |
| 376 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
377 static int8_t check_AscentRate(SDiveState * pDiveState) |
| 38 | 378 { |
| 379 if(stateUsed->mode != MODE_DIVE) | |
| 380 { | |
| 381 pDiveState->warnings.ascentRateHigh = 0; | |
| 382 return 0; | |
| 383 } | |
| 384 | |
| 385 float warnAscentRateFloat; | |
| 386 | |
| 387 warnAscentRateFloat = (float)(settingsGetPointer()->ascent_MeterPerMinute_max); | |
| 388 | |
| 389 if(pDiveState->lifeData.ascent_rate_meter_per_min >= warnAscentRateFloat) | |
| 390 pDiveState->warnings.ascentRateHigh = 1; | |
| 391 else | |
| 392 pDiveState->warnings.ascentRateHigh = 0; | |
| 393 return pDiveState->warnings.ascentRateHigh; | |
| 394 } | |
| 395 | |
| 396 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
397 static int8_t check_aGF(SDiveState * pDiveState) |
| 38 | 398 { |
| 399 if(stateUsed->mode != MODE_DIVE) | |
| 400 { | |
| 401 pDiveState->warnings.aGf = 0; | |
| 402 return 0; | |
| 403 } | |
| 404 | |
| 405 pDiveState->warnings.aGf = 0; | |
| 406 if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 407 { | |
| 408 if((pDiveState->diveSettings.gf_high != settingsGetPointer()->GF_high) || (pDiveState->diveSettings.gf_low != settingsGetPointer()->GF_low)) | |
| 409 pDiveState->warnings.aGf = 1; | |
| 410 } | |
| 411 return pDiveState->warnings.aGf; | |
| 412 } | |
| 413 | |
|
478
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
414 #ifdef ENABLE_BOTTLE_SENSOR |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
415 static int8_t check_pressureSensor(SDiveState * pDiveState) |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
416 { |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
417 int8_t ret = 0; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
418 if(pDiveState->lifeData.bottle_bar_age_MilliSeconds[pDiveState->lifeData.actualGas.GasIdInSettings] < 50) /* we received a new value */ |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
419 { |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
420 pDiveState->warnings.newPressure = stateUsed->lifeData.bottle_bar[stateUsed->lifeData.actualGas.GasIdInSettings]; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
421 ret = 1; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
422 } |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
423 else |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
424 { |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
425 pDiveState->warnings.newPressure = 0; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
426 } |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
427 return ret; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
428 } |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
272
diff
changeset
|
429 #endif |
| 38 | 430 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |
| 431 |