Mercurial > public > ostc4
annotate Small_CPU/Src/batteryCharger.c @ 884:940f8e132638 Evo_2_23
Minor screen cleanup:
In flipped mode some visualization did not match the non flipped version. Also depth display in T7 view has been moved
author | Ideenmodellierer |
---|---|
date | Sun, 01 Sep 2024 20:31:01 +0200 |
parents | d32901746950 |
children |
rev | line source |
---|---|
38 | 1 /** |
2 ****************************************************************************** | |
3 * @file batteryCharger.c | |
4 * @author heinrichs weikamp gmbh | |
5 * @date 09-Dec-2014 | |
6 * @version V0.0.1 | |
7 * @since 09-Dec-2014 | |
8 * @brief LTC4054 Battery Charger | |
9 * | |
10 @verbatim | |
11 ============================================================================== | |
12 ##### How to use ##### | |
13 ============================================================================== | |
14 | |
15 The bq5105x provides one status output, CHG. This output is an open-drain NMOS device that is rated to 20 V. | |
16 The open-drain FET connected to the CHG pin will be turned on whenever the output (BAT) of the charger is | |
17 enabled. As a note, the output of the charger supply will not be enabled if the VRECT-REG does not converge to the | |
18 no-load target voltage. | |
19 | |
644 | 20 CHG F4 7 O Open-drain output � active when BAT is enabled. Float if not used. |
38 | 21 |
22 @endverbatim | |
23 ****************************************************************************** | |
24 * @attention | |
25 * | |
26 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
27 * | |
28 ****************************************************************************** | |
29 */ | |
30 /* Includes ------------------------------------------------------------------*/ | |
31 #include "batteryCharger.h" | |
32 #include "batteryGasGauge.h" | |
33 #include "stm32f4xx_hal.h" | |
34 #include "scheduler.h" | |
35 | |
36 | |
662 | 37 #define CHARGER_DEBOUNCE_SECONDS (6u) /* 6 seconds used to avoid problems with charger interrupts / disconnections */ |
38 | 38 |
668 | 39 static uint16_t battery_charger_counter = 0; |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
40 static chargerState_t batteryChargerState = Charger_NotConnected; |
38 | 41 |
662 | 42 void set_charge_state(uint8_t newState) |
43 { | |
44 if(newState < Charger_END) | |
45 { | |
46 batteryChargerState = newState; | |
47 } | |
48 } | |
49 | |
50 uint8_t get_charge_state(void) | |
51 { | |
52 return batteryChargerState; | |
53 } | |
54 | |
38 | 55 void init_battery_charger_status(void) |
56 { | |
57 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
58 return; | |
59 #endif | |
60 | |
61 CHARGE_IN_GPIO_ENABLE(); | |
62 CHARGE_OUT_GPIO_ENABLE(); | |
63 | |
64 ReInit_battery_charger_status_pins(); | |
65 } | |
66 | |
67 void ReInit_battery_charger_status_pins(void) | |
68 { | |
69 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
70 return; | |
71 #endif | |
72 | |
73 GPIO_InitTypeDef GPIO_InitStructure; | |
74 | |
75 GPIO_InitStructure.Pin = CHARGE_IN_PIN; | |
76 GPIO_InitStructure.Mode = GPIO_MODE_INPUT; | |
77 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
78 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
79 HAL_GPIO_Init(CHARGE_IN_GPIO_PORT, &GPIO_InitStructure); | |
80 | |
81 GPIO_InitStructure.Pin = CHARGE_OUT_PIN; | |
82 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; | |
83 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
84 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
85 HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); | |
86 } | |
87 | |
88 | |
89 void DeInit_battery_charger_status_pins(void) | |
90 { | |
91 #ifdef OSTC_ON_DISCOVERY_HARDWARE | |
92 return; | |
93 #endif | |
94 GPIO_InitTypeDef GPIO_InitStructure; | |
95 | |
96 | |
97 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; | |
98 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
99 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
100 | |
101 GPIO_InitStructure.Pin = CHARGE_IN_PIN; | |
102 HAL_GPIO_Init(CHARGE_IN_GPIO_PORT, &GPIO_InitStructure); | |
103 | |
104 GPIO_InitStructure.Pin = CHARGE_OUT_PIN; | |
105 HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); | |
106 } | |
107 | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
108 void battery_charger_get_status_and_contral_battery_gas_gauge(uint8_t cycleTimeBase) |
38 | 109 { |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
110 static uint8_t notifyChargeComplete = 0; |
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
111 |
38 | 112 #ifdef OSTC_ON_DISCOVERY_HARDWARE |
113 return; | |
114 #endif | |
115 | |
662 | 116 if(batteryChargerState == Charger_ColdStart) /* wait for the first valid voltage meassurement */ |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
117 { |
859 | 118 if(global.lifeData.battery_voltage != BATTERY_DEFAULT_VOLTAGE) /* wait for first valid voltage value */ |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
119 { |
859 | 120 if((global.lifeData.battery_voltage < BATTERY_CHARGER_CONNECTED_VOLTAGE) |
121 && (global.lifeData.battery_voltage > BATTERY_ENDOF_CHARGE_VOLTAGE)) /* Voltage close to full state => maybe new battery inserted */ | |
662 | 122 { |
123 battery_gas_gauge_set_charge_full(); | |
124 } | |
125 batteryChargerState = Charger_NotConnected; | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
126 } |
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
127 } |
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
128 else |
662 | 129 { /* on disconnection or while disconnected */ |
130 if(HAL_GPIO_ReadPin(CHARGE_IN_GPIO_PORT,CHARGE_IN_PIN)) | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
131 { |
662 | 132 switch(batteryChargerState) |
133 { | |
686 | 134 case Charger_WarmUp: |
662 | 135 case Charger_Active: global.dataSendToMaster.chargeStatus = CHARGER_lostConnection; |
136 global.deviceDataSendToMaster.chargeStatus = CHARGER_lostConnection; | |
137 batteryChargerState = Charger_LostConnection; | |
686 | 138 if(cycleTimeBase > CHARGER_DEBOUNCE_SECONDS) /* adapt connection lost detection to sleep mode */ |
139 { | |
140 battery_charger_counter = cycleTimeBase + 1; | |
141 } | |
142 else | |
143 { | |
144 battery_charger_counter = CHARGER_DEBOUNCE_SECONDS; | |
145 } | |
662 | 146 break; |
859 | 147 case Charger_Finished: if((get_voltage() >= BATTERY_ENDOF_CHARGE_VOLTAGE) && (get_voltage() < BATTERY_CHARGER_CONNECTED_VOLTAGE)) /* stopping does not necessarily mean battery is full */ |
148 { | |
149 global.dataSendToMaster.chargeStatus = CHARGER_complete; | |
150 global.deviceDataSendToMaster.chargeStatus = CHARGER_complete; | |
151 notifyChargeComplete = 1; | |
152 } | |
153 battery_charger_counter = 10; | |
686 | 154 batteryChargerState = Charger_LostConnection; |
155 /* no break */ | |
668 | 156 case Charger_LostConnection: /* the charger stops charging when charge current is 1/10 */ |
157 /* Basically it is OK to rate a charging as complete if a defined voltage is reached */ | |
686 | 158 if(((battery_gas_gauge_isChargeValueValid() == 0) || (global.lifeData.battery_charge < 90)) && (get_voltage() >= BATTERY_ENDOF_CHARGE_VOLTAGE) && (get_voltage() < BATTERY_CHARGER_CONNECTED_VOLTAGE)) |
662 | 159 { |
160 notifyChargeComplete = 1; | |
161 } | |
686 | 162 if(battery_charger_counter >= cycleTimeBase) |
662 | 163 { |
164 battery_charger_counter -= cycleTimeBase; | |
165 } | |
166 else | |
167 { | |
168 battery_charger_counter = 0; | |
859 | 169 |
662 | 170 global.dataSendToMaster.chargeStatus = CHARGER_off; |
171 global.deviceDataSendToMaster.chargeStatus = CHARGER_off; | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
172 |
662 | 173 if(notifyChargeComplete) |
174 { | |
175 battery_gas_gauge_set_charge_full(); | |
176 scheduleUpdateDeviceDataChargerFull(); | |
177 } | |
859 | 178 notifyChargeComplete = 0; |
662 | 179 batteryChargerState = Charger_NotConnected; |
180 } | |
181 break; | |
859 | 182 default: batteryChargerState = Charger_NotConnected; /* unexpected state => reinitialize state machine */ |
183 break; | |
662 | 184 } |
185 } | |
186 else | |
187 { | |
188 /* connected */ | |
189 /* wait for disconnection to write and reset */ | |
190 switch(batteryChargerState) | |
191 { | |
859 | 192 case Charger_NotConnected: battery_charger_counter = 0; |
662 | 193 batteryChargerState = Charger_WarmUp; |
194 break; | |
195 case Charger_LostConnection: batteryChargerState = Charger_Active; | |
196 break; | |
197 case Charger_WarmUp: battery_charger_counter += cycleTimeBase; | |
198 if(battery_charger_counter >= CHARGER_DEBOUNCE_SECONDS ) | |
199 { | |
200 scheduleUpdateDeviceDataChargerCharging(); | |
201 batteryChargerState = Charger_Active; | |
202 } | |
203 /* no break */ | |
204 case Charger_Finished: | |
205 case Charger_Active: global.dataSendToMaster.chargeStatus = CHARGER_running; | |
206 global.deviceDataSendToMaster.chargeStatus = CHARGER_running; | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
207 |
662 | 208 /* drive the output pin high to determine the state of the charger */ |
209 GPIO_InitTypeDef GPIO_InitStructure; | |
210 GPIO_InitStructure.Pin = CHARGE_OUT_PIN; | |
211 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
212 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
213 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
214 HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); | |
215 HAL_GPIO_WritePin(CHARGE_OUT_GPIO_PORT, CHARGE_OUT_PIN,GPIO_PIN_SET); | |
216 HAL_Delay(1); | |
217 | |
218 if(HAL_GPIO_ReadPin(CHARGE_IN_GPIO_PORT,CHARGE_IN_PIN)) /* high => charger stopped charging */ | |
219 { | |
859 | 220 battery_charger_counter = 30; |
662 | 221 batteryChargerState = Charger_Finished; |
222 } | |
223 else | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
224 { |
668 | 225 if(global.lifeData.battery_charge > 100.0) /* still charging but indicator is set to full => decrease to 99% to keep count increasing */ |
226 { | |
227 battery_gas_gauge_set(99.0); | |
228 } | |
662 | 229 if(batteryChargerState == Charger_Finished) /* voltage dropped below the hysteresis again => charging restarted */ |
230 { | |
231 batteryChargerState = Charger_Active; | |
232 notifyChargeComplete = 0; | |
233 } | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
234 } |
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
235 |
662 | 236 /* restore high impedance to be able to detect disconnection */ |
237 GPIO_InitStructure.Pin = CHARGE_OUT_PIN; | |
238 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; | |
239 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
240 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
241 HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); | |
242 HAL_Delay(1); | |
243 break; | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
244 |
859 | 245 default: batteryChargerState = Charger_NotConnected; /* unexpected state => reinitialize state machine */ |
662 | 246 break; |
247 } | |
643
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
248 } |
5149cd644fbc
Reimplemented charger status generation (deactivated):
Ideenmodellierer
parents:
38
diff
changeset
|
249 } |
38 | 250 } |
251 | |
252 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |