677
+ − 1 ///////////////////////////////////////////////////////////////////////////////
+ − 2 /// -*- coding: UTF-8 -*-
+ − 3 ///
+ − 4 /// \file Discovery/Inc/configuration.h
+ − 5 /// \brief Header file for variant specific firmware adaptations at compile time
+ − 6 /// \author heinrichs weikamp gmbh
+ − 7 /// \date 29-February-2020
+ − 8 ///
+ − 9 /// $Id$
+ − 10 ///////////////////////////////////////////////////////////////////////////////
+ − 11 /// \par Copyright (c) 2014-2020 Heinrichs Weikamp gmbh
+ − 12 ///
+ − 13 /// This program is free software: you can redistribute it and/or modify
+ − 14 /// it under the terms of the GNU General Public License as published by
+ − 15 /// the Free Software Foundation, either version 3 of the License, or
+ − 16 /// (at your option) any later version.
+ − 17 ///
+ − 18 /// This program is distributed in the hope that it will be useful,
+ − 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of
+ − 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ − 21 /// GNU General Public License for more details.
+ − 22 ///
+ − 23 /// You should have received a copy of the GNU General Public License
+ − 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>.
+ − 25 //////////////////////////////////////////////////////////////////////////////
+ − 26
+ − 27 #ifndef CONFIGURATION_HEADER
+ − 28 #define CONFIGURATION_HEADER
+ − 29
+ − 30 /* Enable this to make the simulator write a logbook entry */
+ − 31 /* #define SIM_WRITES_LOGBOOK 1 */
+ − 32
+ − 33 /* Enable this for support of optical bottle pressure interface */
+ − 34 /* #define ENABLE_BOTTLE_SENSOR */
+ − 35
+ − 36 /* Enable this to show voltage in parallel to charge state */
876
+ − 37 #define ALWAYS_SHOW_VOLTAGE
677
+ − 38
+ − 39 /* Enable this to skip coplete scan of dive log during startup */
+ − 40 #define TRUST_LOG_CONSISTENCY
+ − 41
+ − 42 /* Enable this to transfer additional data list last dive ID and last sample index during raw data requests */
+ − 43 /* define SEND_DATA_DETAILS */
+ − 44
+ − 45 /* Enable to activate a menu item in reset menu which provide sample ring analysis / repair functionality */
+ − 46 /* #define ENABLE_ANALYSE_SAMPLES */
+ − 47
+ − 48 /* Enable to have access to the debug view options (turn on / off via menu instead of compile switch) */
898
+ − 49 /* #define HAVE_DEBUG_VIEW */
677
+ − 50
896
+ − 51 /* Enable to have runtime information displayed in t7 debug view */
898
+ − 52 /* #define T7_DEBUG_RUNTIME */
896
+ − 53
+ − 54 /* Enable to have event based warnings being displayed as warning messages when they occur */
857
+ − 55 #define HAVE_DEBUG_WARNINGS
+ − 56
677
+ − 57 /* Enable to have access to the motion control selection menu */
692
+ − 58 /* #define ENABLE_MOTION_CONTROL */
677
+ − 59
+ − 60 /* Enable to have option to hide not needed gases from dive views */
+ − 61 /* #define ENABLE_UNUSED_GAS_HIDING */
+ − 62
+ − 63 /* Enable to have the new T3 profile view available */
+ − 64 #define ENABLE_T3_PROFILE_VIEW
+ − 65
+ − 66 /* Enable to have PPO2 adjustments in T3 sensor view during dive simulation */
+ − 67 /* #define ENABLE_T3_PPO_SIM */
+ − 68
+ − 69 /* Enable to have PSCR functionality available */
+ − 70 #define ENABLE_PSCR_MODE
+ − 71
+ − 72 /* Enable to have CO2 sensor functionality available */
876
+ − 73 #define ENABLE_CO2_SUPPORT
677
+ − 74
920
+ − 75 /* Enable to have GPS sensor functionality available */
927
+ − 76 /* #define ENABLE_GNSS_SUPPORT */
920
+ − 77
692
+ − 78 /* Enable to have Sentinel rebreather interface available */
+ − 79 /* #define ENABLE_SENTINEL_MODE */
+ − 80
677
+ − 81 /* Enable if you are using sensors with a voltage range 8..16 mV at surface / air level */
+ − 82 #define ENABLE_ALTERNATIVE_SENSORTYP
+ − 83
727
+ − 84 /* Enable if an external pressure sensor is connected at ADC channel3 (used for sensor verification) */
+ − 85 /* #define ENABLE_EXTERNAL_PRESSURE */
+ − 86
883
+ − 87 /* Enable if the menu item predive check shall be available */
+ − 88 /* #define ENABLE_PREDIVE_CHECK */
+ − 89
893
+ − 90 /* Enable to have a faster transfer speed between bluetooth module and CPU */
+ − 91 #define ENABLE_FAST_COMM
+ − 92
899
+ − 93 /* Enable to have position sensor support active */
922
+ − 94 #define ENABLE_GPIO_V2
899
+ − 95
937
+ − 96 /* Enable RTE sleep mode debugging */
+ − 97 /* #define ENABLE_SLEEP_DEBUG */
+ − 98
+ − 99
677
+ − 100 #endif