Mercurial > public > ostc4
annotate Discovery/Src/tMenuEditGasOC.c @ 926:875933272056 Evo_2_23
Bugfix sensor de-/activation handling:
In the previous version a CO2 sensor could cause a not used analog channel to be displayed. Rootcause was that all sensor type, not only o2 sensors, were used for o2 sensor deactivation evaluation. The deactivation state is the criteria if a value is displayed or not.
In the new version only o2 sensor type are used for handling of sensor de-/activation state.
In addition the cursor will now be set to the first valid sensor entry in case sensor slot 0 is empty.
| author | Ideenmodellierer |
|---|---|
| date | Thu, 14 Nov 2024 20:13:18 +0100 |
| parents | b7d93ff6b3b2 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/tMenuEditGasOC.c | |
| 5 /// \brief Main Template file for editing Open Circuit Gas Settings | |
| 6 /// \author heinrichs weikamp gmbh | |
| 7 /// \date 09-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 /* Includes ------------------------------------------------------------------*/ | |
| 30 #include "tMenuEditGasOC.h" | |
| 31 | |
| 32 #include "check_warning.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "tMenuEdit.h" | |
| 35 #include "unit.h" | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
36 #include "configuration.h" |
| 38 | 37 |
| 38 /* Private types -------------------------------------------------------------*/ | |
| 39 typedef struct | |
| 40 { | |
| 41 uint8_t gasID; | |
| 42 SGasLine * pGasLine; | |
| 43 uint8_t mod; | |
| 44 uint8_t ccr; | |
| 45 uint8_t setpoint; | |
| 46 } SEditGasPage; | |
| 47 | |
| 48 | |
| 49 /* Private variables ---------------------------------------------------------*/ | |
| 50 SEditGasPage editGasPage; | |
| 51 | |
| 52 /* Private function prototypes -----------------------------------------------*/ | |
| 53 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2); | |
| 54 | |
| 55 void openEdit_Gas(uint8_t line, uint8_t ccr); | |
| 56 void openEdit_GasType(void); | |
| 57 | |
| 58 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr); | |
| 59 void openEdit_SpecialDiveGasMenu(uint8_t ccr); | |
| 60 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr); | |
| 61 | |
| 62 void tMEGas_check_switch_to_bailout(void); | |
| 63 | |
| 64 /* Announced function prototypes -----------------------------------------------*/ | |
| 65 uint8_t OnAction_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 66 uint8_t OnAction_GasType (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 67 uint8_t OnAction_ChangeDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 68 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
69 uint8_t OnAction_CalcDeco (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 70 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 71 | |
| 72 uint8_t OnAction_First (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 73 uint8_t OnAction_Deco (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 74 uint8_t OnAction_Travel (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 75 uint8_t OnAction_Inactive (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
76 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); |
| 38 | 77 |
| 78 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 79 uint8_t OnAction_DM_Mix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 80 | |
| 81 /* | |
| 82 uint8_t OnAction_DefaultMix (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 83 uint8_t OnAction_ToggleDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 84 uint8_t OnAction_ToggleDefault (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 85 uint8_t OnAction_DefaultDepth (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action); | |
| 86 */ | |
| 87 | |
| 88 /* Exported functions --------------------------------------------------------*/ | |
| 89 | |
| 90 void openEdit_GasCC(uint8_t line) | |
| 91 { | |
| 92 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
93 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
94 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
95 { |
| 662 | 96 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
97 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
98 selectPage(StMOG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
99 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
100 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
101 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
102 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
103 openEdit_Gas(line , 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
104 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
105 } |
| 38 | 106 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
107 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
108 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
109 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
110 openEdit_SpecialDiveGasMenu(1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
111 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
112 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
113 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
114 openEdit_DiveGasSelect(line, 1); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
115 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
116 } |
| 38 | 117 } |
| 118 | |
| 119 | |
| 120 void openEdit_GasOC(uint8_t line) | |
| 121 { | |
| 122 if(actual_menu_content == MENU_SURFACE) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
123 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
124 if(line == 6) |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
125 { |
| 662 | 126 if(isLoopMode(settingsGetPointer()->dive_mode) || (stateUsed->diveSettings.ccrOption == 1)) |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
127 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
128 selectPage(StMCG); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
129 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
130 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
131 else |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
132 { |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
133 openEdit_Gas(line, 0); |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
134 } |
|
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
135 } |
| 38 | 136 else |
| 137 if(line == 6) | |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
138 { |
| 38 | 139 openEdit_SpecialDiveGasMenu(0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
140 } |
| 38 | 141 else |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
142 { |
| 38 | 143 openEdit_DiveGasSelect(line, 0); |
|
647
15f6f0b5786c
Integrated selection of bailout in the diluent selection page:
Ideenmodellierer
parents:
528
diff
changeset
|
144 } |
| 38 | 145 } |
| 146 | |
| 147 | |
| 148 /* dive mode */ | |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
149 void openEdit_DiveSelectBetterGas(bool doBailout) |
| 38 | 150 { |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
151 uint8_t gasId; |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
152 if (doBailout) { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
153 gasId = actualBetterBailoutGasId(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
154 } else { |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
155 gasId = actualBetterGasId(); |
|
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
156 } |
| 38 | 157 |
|
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
735
diff
changeset
|
158 uint8_t ccr = 0; |
| 38 | 159 if(gasId>5) |
| 160 { | |
| 161 gasId -= 5; | |
| 162 ccr = 1; | |
| 163 } | |
| 164 openEdit_DiveGasSelect_Subroutine(gasId,ccr); | |
| 165 if(ccr) | |
| 166 updateSpecificMenu(StMCG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 167 else | |
| 168 updateSpecificMenu(StMOG); // is this necessary? openEdit_DiveGasSelect_Subroutine has update. hw 151209 | |
| 169 } | |
| 170 | |
| 171 | |
| 172 /* select gas in divemode */ | |
| 173 void openEdit_DiveGasSelect(uint8_t line, uint8_t ccr) | |
| 174 { | |
| 682 | 175 if(!ccr) |
| 176 { | |
| 177 tMEGas_check_switch_to_bailout(); | |
| 178 } | |
| 179 openEdit_DiveGasSelect_Subroutine(line, ccr); | |
| 180 | |
| 38 | 181 exitMenuEdit_to_Home_with_Menu_Update(); |
| 182 } | |
| 183 | |
| 184 | |
| 185 void openEdit_DiveGasSelect_Subroutine(uint8_t line, uint8_t ccr) | |
| 186 { | |
| 187 uint8_t setpoint; | |
| 188 | |
| 699 | 189 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 190 |
| 191 if(ccr) | |
| 192 { | |
| 193 editGasPage.gasID = line + NUM_OFFSET_DILUENT; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
194 setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 195 } |
| 196 else | |
| 197 { | |
| 198 editGasPage.gasID = line; | |
| 199 setpoint = 0; | |
| 200 } | |
| 201 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
202 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
203 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.off) /* disable selection of switched off gases */ |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
204 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
205 return; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
206 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
207 #endif |
| 38 | 208 |
| 209 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
210 setActualGas_DM(&stateUsedWrite->lifeData,editGasPage.gasID,setpoint); |
| 38 | 211 } |
| 212 | |
| 213 /* extra gas and gas on/off option */ | |
| 214 void openEdit_SpecialDiveGasMenu(uint8_t ccr) | |
| 215 { | |
| 216 char text[32]; | |
| 217 uint8_t oxygen, helium, gasOffset, textpointer, lineCount, ptrGas; | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
218 //SDiveState * pState; |
| 38 | 219 |
| 699 | 220 editGasPage.pGasLine = (SGasLine *)stateUsed->diveSettings.gas; |
| 38 | 221 if(ccr) |
| 222 { | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
223 editGasPage.setpoint = stateUsed->lifeData.actualGas.setPoint_cbar; |
| 38 | 224 } |
| 225 editGasPage.ccr = ccr; | |
| 226 | |
| 227 set_globalState_Menu_Line(6); | |
| 228 | |
| 229 if(ccr) | |
| 230 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 231 else | |
| 232 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 233 | |
| 234 if(ccr) | |
| 235 gasOffset = NUM_OFFSET_DILUENT; | |
| 236 else | |
| 237 gasOffset = 0; | |
| 238 | |
| 239 | |
| 240 text[0] = '\001'; | |
| 241 text[1] = TXT_2BYTE; | |
| 242 if(ccr) | |
| 243 text[2] = TXT2BYTE_SpecialDiveGasMenuCCR; | |
| 244 else | |
| 245 text[2] = TXT2BYTE_SpecialDiveGasMenu; | |
| 246 text[3] = 0; | |
| 247 write_topline(text); | |
| 248 | |
| 249 lineCount = 1; | |
| 250 | |
| 251 | |
| 252 for(int i=1; i<=5; i++) | |
| 253 { | |
| 254 ptrGas = i + gasOffset; | |
| 255 oxygen = stateUsed->diveSettings.gas[ptrGas].oxygen_percentage; | |
| 256 helium = stateUsed->diveSettings.gas[ptrGas].helium_percentage; | |
| 257 | |
| 258 if(oxygen == 100) | |
| 259 textpointer = snprintf(text,10,"Oxy"); | |
| 260 else | |
| 261 if((oxygen == 21) && (helium == 0)) | |
| 262 textpointer = snprintf(text,10,"Air"); | |
| 263 else | |
| 264 textpointer = snprintf(text,10,"%02i/%02i",oxygen,helium); | |
| 265 | |
| 266 if(editGasPage.pGasLine[ptrGas].note.ub.first) | |
| 267 strcpy(&text[textpointer]," *"); | |
| 268 | |
| 269 write_field_on_off(StMOG_DM_ActiveBase+i, 30, 500, ME_Y_LINE_BASE + (lineCount * ME_Y_LINE_STEP), &FontT48, text, stateUsed->diveSettings.gas[ptrGas].note.ub.active); | |
| 270 lineCount++; | |
| 271 } | |
| 272 | |
| 273 if(!ccr) | |
| 274 { | |
| 275 if(stateUsed->diveSettings.gas[0].note.ub.first) | |
| 276 { | |
| 277 oxygen = stateUsed->diveSettings.gas[0].oxygen_percentage; | |
| 278 helium = stateUsed->diveSettings.gas[0].helium_percentage; | |
| 279 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas *", oxygen, helium, 0, 0); | |
| 280 } | |
| 281 else | |
| 282 { | |
| 283 write_field_udigit(StMOG_DM_ExtraMix, 30, 800, ME_Y_LINE6, &FontT48, "##/## Extra Gas", 0, 0, 0, 0); | |
| 284 } | |
| 285 } | |
| 286 | |
| 287 for(int i=1; i<=5; i++) | |
| 288 { | |
| 289 setEvent(StMOG_DM_ActiveBase + i,(uint32_t)OnAction_DM_Active); | |
| 290 } | |
| 291 | |
| 292 if(!ccr) | |
| 293 setEvent(StMOG_DM_ExtraMix,(uint32_t)OnAction_DM_Mix); | |
| 294 } | |
| 295 | |
| 296 | |
| 297 uint8_t OnAction_DM_Active (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 298 { | |
| 299 uint8_t gasOffset, newActive; | |
| 300 | |
| 301 if(editGasPage.ccr) | |
| 302 gasOffset = NUM_OFFSET_DILUENT; | |
| 303 else | |
| 304 gasOffset = 0; | |
| 305 | |
| 306 editGasPage.gasID = editId + gasOffset - StMOG_DM_ActiveBase; | |
| 307 | |
| 308 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.first) | |
| 309 return UNSPECIFIC_RETURN; | |
| 310 | |
| 311 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 312 newActive = 0; | |
| 313 else | |
| 314 newActive = 1; | |
| 315 | |
| 316 tMenuEdit_set_on_off(editId, newActive); | |
| 317 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = newActive; | |
| 318 | |
| 319 return UNSPECIFIC_RETURN; | |
| 320 } | |
| 321 | |
| 322 /* only for OC */ | |
| 323 uint8_t OnAction_DM_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 324 { | |
| 325 uint8_t digitContentNew; | |
| 326 uint32_t newOxygen, newHelium; | |
| 327 | |
| 328 if(action == ACTION_BUTTON_ENTER) | |
| 329 { | |
| 330 return digitContent; | |
| 331 } | |
| 332 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 333 { | |
| 334 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 335 | |
| 336 if(newOxygen < 5) | |
| 337 newOxygen = 5; | |
| 338 if(newOxygen == 99) | |
| 339 newOxygen = 100; | |
| 340 if(newHelium > 95) | |
| 341 newHelium = 95; | |
| 342 if((newOxygen + newHelium) > 100) | |
| 343 newOxygen = 100 - newHelium; | |
| 344 | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
345 //SDiveState * pDiveState = 0; |
| 38 | 346 |
| 347 for(int i=1;i<=(2*NUM_GASES);i++) | |
| 348 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 349 | |
|
735
39f48356049b
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
heinrichsweikamp
parents:
699
diff
changeset
|
350 tMEGas_check_switch_to_bailout(); |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
351 setActualGas_ExtraGas(&stateUsedWrite->lifeData, newOxygen, newHelium, 0); |
| 38 | 352 return EXIT_TO_HOME; |
| 353 } | |
| 354 if(action == ACTION_BUTTON_NEXT) | |
| 355 { | |
| 356 digitContentNew = digitContent + 1; | |
| 357 if(digitContentNew > '9') | |
| 358 digitContentNew = '0'; | |
| 359 return digitContentNew; | |
| 360 } | |
| 361 if(action == ACTION_BUTTON_BACK) | |
| 362 { | |
| 363 digitContentNew = digitContent - 1; | |
| 364 if(digitContentNew < '0') | |
| 365 digitContentNew = '9'; | |
| 366 return digitContentNew; | |
| 367 } | |
| 368 | |
| 369 return UNSPECIFIC_RETURN; | |
| 370 } | |
| 371 | |
| 372 | |
| 373 void tMEGas_check_switch_to_bailout(void) | |
| 374 { | |
| 662 | 375 if(isLoopMode(stateUsed->diveSettings.diveMode)) |
| 38 | 376 { |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
377 stateUsedWrite->diveSettings.diveMode = DIVEMODE_OC; |
| 38 | 378 block_diluent_page(); |
| 379 } | |
| 380 } | |
| 381 | |
| 382 | |
| 383 /* surface mode */ | |
| 384 void openEdit_Gas(uint8_t line, uint8_t ccr) | |
| 385 { | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
386 uint8_t gasID, oxygen, helium, depthDeco, active, first, depthMOD, deco, travel, inactive, off, decocalc;//, bottleSizeLiter; |
| 38 | 387 |
| 388 char text[32]; | |
| 389 char textMOD[32]; | |
| 390 uint8_t txtptr; | |
| 391 | |
| 392 if(line) | |
| 393 set_globalState_Menu_Line(line); | |
| 394 else | |
| 395 set_globalState_Menu_Line(NUM_GASES + 1); | |
| 396 | |
| 397 if(ccr) | |
| 398 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 399 else | |
| 400 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 401 | |
| 402 if(ccr) | |
| 403 gasID = line + NUM_OFFSET_DILUENT; | |
| 404 else | |
| 405 gasID = line; | |
| 406 | |
| 407 editGasPage.ccr = ccr; | |
| 408 editGasPage.gasID = gasID; | |
| 409 editGasPage.mod = calc_MOD(gasID); | |
| 410 | |
| 411 SSettings *data = settingsGetPointer(); | |
| 412 editGasPage.pGasLine = data->gas; | |
| 413 | |
| 414 oxygen = editGasPage.pGasLine[gasID].oxygen_percentage; | |
| 415 if(oxygen > 99) | |
| 416 oxygen = 99; | |
| 417 helium = editGasPage.pGasLine[gasID].helium_percentage; | |
| 418 depthDeco = editGasPage.pGasLine[gasID].depth_meter; | |
| 419 //depthTravel = editGasPage.pGasLine[gasID].depth_meter_travel; | |
| 420 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 421 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 422 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 423 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
424 off = editGasPage.pGasLine[gasID].note.ub.off; |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
425 decocalc = editGasPage.pGasLine[gasID].note.ub.decocalc; |
| 38 | 426 //bottleSizeLiter = editGasPage.pGasLine[gasID].bottle_size_liter; |
| 427 | |
| 428 if(active) | |
| 429 inactive = 0; | |
| 430 else | |
| 431 inactive = 1; | |
| 432 | |
| 433 depthMOD = editGasPage.mod; | |
| 434 | |
| 435 int i = 0; | |
| 436 if(gasID >= 10) | |
| 437 { | |
| 438 i = 1; | |
| 439 strcpy(text, "\001" "Gas #10 X"); | |
| 440 } | |
| 441 else | |
| 442 strcpy(text, "\001" "Gas #0 X"); | |
| 443 | |
| 444 if(ccr) | |
| 445 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 446 else | |
| 447 text[8+i] = TXT_OC_Gas_Edit; | |
| 448 | |
| 449 if(gasID >= 10) | |
| 450 text[6+i] += gasID - 10; | |
| 451 else | |
| 452 text[6+i] += gasID; | |
| 453 | |
| 454 write_topline(text); | |
| 455 if(actual_menu_content == MENU_SURFACE) | |
| 456 { | |
| 457 write_label_fix( 20, 800, ME_Y_LINE1, &FontT48, TXT_Mix); | |
| 458 write_field_udigit(StMOG_Mix, 210, 400, ME_Y_LINE1, &FontT48, "##/##", (uint32_t)oxygen, (uint32_t)helium, 0, 0); | |
| 459 | |
| 460 | |
| 461 text[1] = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
462 if(off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
463 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
464 else |
| 38 | 465 if(inactive) |
| 466 text[0] = TXT_Inactive; | |
| 467 else | |
| 468 if(first) | |
| 469 text[0] = TXT_First; | |
| 470 else | |
| 471 if(deco) | |
| 472 text[0] = TXT_Deco; | |
| 473 else | |
| 474 if(travel) | |
| 475 text[0] = TXT_Travel; | |
| 476 else | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
477 text[0] = TXT_Inactive; |
| 38 | 478 |
| 479 write_field_button(StMOG_GasType, 20, 710, ME_Y_LINE2, &FontT48, text); | |
| 480 | |
| 481 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
482 if((deco) || (travel && ccr)) |
| 38 | 483 { |
| 484 text[0] = TXT_ChangeDepth; | |
| 485 text[1] = ' '; | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
486 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
487 if(deco) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
488 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
489 text[2] = TXT_Deco; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
490 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
491 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
492 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
493 text[2] = TXT_Travel; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
494 } |
| 38 | 495 text[3] = 0; |
| 496 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 497 | |
| 498 textMOD[0] = '#'; | |
| 499 textMOD[1] = '#'; | |
| 500 textMOD[2] = '#'; | |
| 501 textMOD[3] = unit_depth_char1(); | |
| 502 textMOD[4] = unit_depth_char2(); | |
| 503 textMOD[5] = 0; | |
| 504 write_field_udigit(StMOG_ChangeDepth, 600, 710, ME_Y_LINE3, &FontT48,textMOD, (uint32_t)unit_depth_integer(depthDeco), 0, 0, 0); | |
| 505 | |
| 506 txtptr = 0; | |
| 507 text[txtptr++] = TXT_2BYTE; | |
| 508 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 509 text[txtptr++] = 0; | |
| 510 write_field_button(StMOG_SetToMOD, 20, 710, ME_Y_LINE4, &FontT48,text); | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
511 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
512 if(deco) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
513 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
514 txtptr = 0; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
515 text[txtptr++] = TXT_2BYTE; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
516 text[txtptr++] = TXT2BYTE_CalculateDeco; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
517 text[txtptr++] = 0; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
518 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
519 write_field_on_off(StMOG_CalcDeco, 20, 710, ME_Y_LINE5, &FontT48, text, decocalc); |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
520 } |
| 38 | 521 } |
| 522 else | |
| 523 { | |
| 524 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
525 text[txtptr++] = '\031'; |
| 38 | 526 text[txtptr++] = TXT_ChangeDepth; |
| 527 text[txtptr++] = ' '; | |
| 528 text[txtptr++] = TXT_Deco; | |
| 529 text[txtptr++] = 0; | |
| 530 write_label_var( 20 ,800, ME_Y_LINE3, &FontT48, text); | |
| 531 | |
| 532 txtptr = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
533 text[txtptr++] = '\031'; |
| 38 | 534 text[txtptr++] = TXT_2BYTE; |
| 535 text[txtptr++] = TXT2BYTE_SetToMOD; | |
| 536 text[txtptr++] = 0; | |
| 537 write_label_var( 20 ,800, ME_Y_LINE4, &FontT48, text); | |
| 538 } | |
| 539 /* | |
| 540 txtptr = 0; | |
| 541 text[txtptr++] = TXT_2BYTE; | |
| 542 text[txtptr++] = TXT2BYTE_Bottle; | |
| 543 text[txtptr++] = 0; | |
| 544 write_label_var( 20 ,800, ME_Y_LINE5, &FontT48, text); | |
| 545 write_field_2digit(StMOG_Bottle, 600, 710, ME_Y_LINE5, &FontT48,"## ltr", (uint32_t)bottleSizeLiter, 0, 0, 0); | |
| 546 | |
| 547 */ | |
| 548 stop_cursor_fields(); | |
| 549 | |
| 550 textMOD[0] = '#'; | |
| 551 textMOD[1] = '#'; | |
| 552 textMOD[2] = '#'; | |
| 553 textMOD[3] = unit_depth_char1(); | |
| 554 textMOD[4] = unit_depth_char2(); | |
| 555 textMOD[5] = ' '; | |
| 556 textMOD[6] = 'M'; | |
| 557 textMOD[7] = 'O'; | |
| 558 textMOD[8] = 'D'; | |
| 559 textMOD[9] = 0; | |
| 560 | |
| 561 write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, textMOD, (uint32_t)unit_depth_integer(depthMOD), 0, 0, 0); | |
| 562 // write_field_udigit(StMOG_MOD, 401, 780, ME_Y_LINE1, &FontT48, "###m MOD", (uint32_t)depthMOD, 0, 0, 0); | |
| 563 | |
| 564 setEvent(StMOG_Mix, (uint32_t)OnAction_Mix); | |
| 565 setEvent(StMOG_GasType, (uint32_t)OnAction_GasType); | |
| 566 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
567 if((deco) || (travel && ccr)) |
| 38 | 568 { |
| 569 setEvent(StMOG_ChangeDepth, (uint32_t)OnAction_ChangeDepth); | |
| 570 setEvent(StMOG_SetToMOD, (uint32_t)OnAction_SetToMOD); | |
| 571 } | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
572 if(deco) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
573 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
574 setEvent(StMOG_CalcDeco, (uint32_t)OnAction_CalcDeco); |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
575 } |
| 38 | 576 /* |
| 577 setEvent(StMOG_Bottle, (uint32_t)OnAction_BottleSize); | |
| 578 */ | |
| 579 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 580 } | |
| 581 } | |
| 582 | |
| 583 /* surface mode */ | |
| 584 void openEdit_GasType(void) | |
| 585 { | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
586 uint8_t gasID, active, first, deco, travel, inactive, off; |
| 38 | 587 char text[32]; |
| 588 | |
| 589 | |
| 590 if(editGasPage.ccr) | |
| 591 { | |
| 592 resetMenuEdit(CLUT_MenuPageGasCC); | |
| 593 setBackMenu((uint32_t)openEdit_GasCC, editGasPage.gasID - NUM_OFFSET_DILUENT, 2); | |
| 594 } | |
| 595 else | |
| 596 { | |
| 597 resetMenuEdit(CLUT_MenuPageGasOC); | |
| 598 setBackMenu((uint32_t)openEdit_GasOC, editGasPage.gasID, 2); | |
| 599 } | |
| 600 | |
| 601 gasID = editGasPage.gasID; | |
| 602 active = editGasPage.pGasLine[gasID].note.ub.active; | |
| 603 first = editGasPage.pGasLine[gasID].note.ub.first; | |
| 604 deco = editGasPage.pGasLine[gasID].note.ub.deco; | |
| 605 travel = editGasPage.pGasLine[gasID].note.ub.travel; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
606 off = editGasPage.pGasLine[gasID].note.ub.off; |
| 38 | 607 |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
608 if((active) || (off)) |
| 38 | 609 inactive = 0; |
| 610 else | |
| 611 inactive = 1; | |
| 612 | |
| 613 | |
| 614 /* header */ | |
| 615 int i = 0; | |
| 616 if(gasID >= 10) | |
| 617 { | |
| 618 i = 1; | |
| 619 strcpy(text, "\001" "Gas #10 X"); | |
| 620 } | |
| 621 else | |
| 622 strcpy(text, "\001" "Gas #0 X"); | |
| 623 | |
| 624 if(editGasPage.ccr) | |
| 625 text[8+i] = TXT_Diluent_Gas_Edit; | |
| 626 else | |
| 627 text[8+i] = TXT_OC_Gas_Edit; | |
| 628 | |
| 629 if(gasID >= 10) | |
| 630 text[6+i] += gasID - 10; | |
| 631 else | |
| 632 text[6+i] += gasID; | |
| 633 write_topline(text); | |
| 634 | |
| 635 text[1] = 0; | |
| 636 text[0] = TXT_First; | |
| 637 write_field_on_off(StMOG_First, 30, 400, ME_Y_LINE1, &FontT48, text, first); | |
| 638 | |
| 639 text[0] = TXT_Deco; | |
| 640 write_field_on_off(StMOG_Deco, 30, 400, ME_Y_LINE2, &FontT48, text, deco); | |
| 641 | |
| 642 text[0] = TXT_Travel; | |
| 643 write_field_on_off(StMOG_Travel, 30, 400, ME_Y_LINE3, &FontT48, text, travel); | |
| 644 | |
| 645 text[0] = TXT_Inactive; | |
| 646 write_field_on_off(StMOG_Inactive, 30, 400, ME_Y_LINE4, &FontT48, text, inactive); | |
| 647 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
648 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
649 text[0] = TXT_Off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
650 write_field_on_off(StMOG_Off, 30, 400, ME_Y_LINE5, &FontT48, text, off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
651 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
652 |
| 38 | 653 setEvent(StMOG_First, (uint32_t)OnAction_First); |
| 654 setEvent(StMOG_Deco, (uint32_t)OnAction_Deco); | |
| 655 setEvent(StMOG_Travel, (uint32_t)OnAction_Travel); | |
| 656 setEvent(StMOG_Inactive, (uint32_t)OnAction_Inactive); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
657 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
658 setEvent(StMOG_Off, (uint32_t)OnAction_Off); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
659 #endif |
| 38 | 660 |
| 661 write_buttonTextline(TXT2BYTE_ButtonBack,TXT2BYTE_ButtonEnter,TXT2BYTE_ButtonNext); | |
| 662 } | |
| 663 | |
| 664 uint8_t OnAction_GasType(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 665 { | |
| 666 openEdit_GasType(); | |
| 667 return UNSPECIFIC_RETURN; | |
| 668 } | |
| 669 | |
| 670 uint8_t OnAction_Mix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 671 { | |
| 672 uint8_t digitContentNew; | |
| 673 uint32_t newOxygen, newHelium; | |
| 674 | |
| 675 if(action == ACTION_BUTTON_ENTER) | |
| 676 { | |
| 677 return digitContent; | |
| 678 } | |
| 679 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 680 { | |
| 681 evaluateNewString(editId, &newOxygen, &newHelium, 0, 0); | |
| 682 | |
| 683 if(newOxygen < 5) | |
| 684 newOxygen = 5; | |
| 685 if(newOxygen == 99) | |
| 686 newOxygen = 100; | |
| 687 if(newHelium > 95) | |
| 688 newHelium = 95; | |
| 689 if((newOxygen + newHelium) > 100) | |
| 690 newOxygen = 100 - newHelium; | |
| 691 | |
| 692 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 693 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 694 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 695 | |
| 696 if(newOxygen == 100) | |
| 697 newOxygen = 99; | |
| 698 | |
| 699 tMenuEdit_newInput(editId, newOxygen, newHelium, 0, 0); | |
| 700 tMenuEdit_newInput(StMOG_MOD, (uint32_t)unit_depth_integer(editGasPage.mod), 0, 0, 0); | |
| 701 | |
| 702 return UPDATE_DIVESETTINGS; | |
| 703 } | |
| 704 if(action == ACTION_BUTTON_NEXT) | |
| 705 { | |
| 706 digitContentNew = digitContent + 1; | |
| 707 if(digitContentNew > '9') | |
| 708 digitContentNew = '0'; | |
| 709 return digitContentNew; | |
| 710 } | |
| 711 if(action == ACTION_BUTTON_BACK) | |
| 712 { | |
| 713 digitContentNew = digitContent - 1; | |
| 714 if(digitContentNew < '0') | |
| 715 digitContentNew = '9'; | |
| 716 return digitContentNew; | |
| 717 } | |
| 718 | |
| 719 return UNSPECIFIC_RETURN; | |
| 720 } | |
| 721 | |
| 722 /* | |
| 723 uint8_t OnAction_DefaultMix(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 724 { | |
| 725 uint32_t newOxygen, newHelium; | |
| 726 uint8_t depthDEFAULT; | |
| 727 char text[32]; | |
| 728 | |
| 729 newOxygen = 21; | |
| 730 newHelium = 0; | |
| 731 | |
| 732 editGasPage.pGasLine[editGasPage.gasID].oxygen_percentage = newOxygen; | |
| 733 editGasPage.pGasLine[editGasPage.gasID].helium_percentage = newHelium; | |
| 734 | |
| 735 tMenuEdit_newInput(StMOG_Mix, newOxygen, newHelium, 0, 0); | |
| 736 | |
| 737 depthDEFAULT = calc_MOD(editGasPage.gasID); | |
| 738 create_text_with_u8(text, "", depthDEFAULT, "m MOD"); | |
| 739 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 740 | |
| 741 return UPDATE_DIVESETTINGS; | |
| 742 } | |
| 743 | |
| 744 uint8_t OnAction_ToggleDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 745 { | |
| 746 uint8_t depth; | |
| 747 uint32_t newDefaultDepth; | |
| 748 char text[32]; | |
| 749 | |
| 750 if(editGasPage.depth_mode == 0) | |
| 751 { | |
| 752 editGasPage.depth_mode = 1; | |
| 753 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel; | |
| 754 newDefaultDepth = calc_MinOD(editGasPage.gasID); | |
| 755 create_text_with_u8(text, "", newDefaultDepth, "m Min"); | |
| 756 } | |
| 757 else | |
| 758 { | |
| 759 editGasPage.depth_mode = 0; | |
| 760 depth = editGasPage.pGasLine[editGasPage.gasID].depth_meter; | |
| 761 newDefaultDepth = calc_MOD(editGasPage.gasID); | |
| 762 create_text_with_u8(text, "", newDefaultDepth, "m MOD"); | |
| 763 } | |
| 764 tMenuEdit_newInput(StMOG_Depth, (uint32_t)depth, 0, 0, 0); | |
| 765 tMenuEdit_newButtonText(StMOG_DefaultDepth, text); | |
| 766 | |
| 767 return UNSPECIFIC_RETURN; | |
| 768 } | |
| 769 | |
| 770 | |
| 771 uint8_t OnAction_Depth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 772 { | |
| 773 uint8_t digitContentNew; | |
| 774 uint32_t newDepth; | |
| 775 | |
| 776 if(action == ACTION_BUTTON_ENTER) | |
| 777 { | |
| 778 return digitContent; | |
| 779 } | |
| 780 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 781 { | |
| 782 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 783 if(newDepth > 255) | |
| 784 newDepth = 255; | |
| 785 if(editGasPage.depth_mode == 0) | |
| 786 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 787 else | |
| 788 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 789 tMenuEdit_newInput(editId, newDepth, 0, 0, 0); | |
| 790 return UPDATE_DIVESETTINGS; | |
| 791 } | |
| 792 if(action == ACTION_BUTTON_NEXT) | |
| 793 { | |
| 794 digitContentNew = digitContent + 1; | |
| 795 if(digitContentNew > '9') | |
| 796 digitContentNew = '0'; | |
| 797 return digitContentNew; | |
| 798 } | |
| 799 if(action == ACTION_BUTTON_BACK) | |
| 800 { | |
| 801 digitContentNew = digitContent - 1; | |
| 802 if(digitContentNew < '0') | |
| 803 digitContentNew = '9'; | |
| 804 return digitContentNew; | |
| 805 } | |
| 806 | |
| 807 return UNSPECIFIC_RETURN; | |
| 808 } | |
| 809 | |
| 810 | |
| 811 uint8_t OnAction_DefaultDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 812 { | |
| 813 uint32_t newDepth; | |
| 814 | |
| 815 if(editGasPage.depth_mode == 0) | |
| 816 { | |
| 817 newDepth = calc_MOD(editGasPage.gasID); | |
| 818 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; | |
| 819 } | |
| 820 else | |
| 821 { | |
| 822 newDepth = calc_MinOD(editGasPage.gasID); | |
| 823 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; | |
| 824 } | |
| 825 | |
| 826 tMenuEdit_newInput(StMOG_Depth, newDepth, 0, 0, 0); | |
| 827 | |
| 828 return UPDATE_DIVESETTINGS; | |
| 829 } | |
| 830 | |
| 831 | |
| 832 uint8_t OnAction_Active(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 833 { | |
| 834 uint8_t active, first; | |
| 835 | |
| 836 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 837 | |
| 838 if(first) | |
| 839 return UNSPECIFIC_RETURN; | |
| 840 | |
| 841 active = editGasPage.pGasLine[editGasPage.gasID].note.ub.active; | |
| 842 | |
| 843 if(active) | |
| 844 { | |
| 845 active = 0; | |
| 846 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 847 } | |
| 848 else | |
| 849 { | |
| 850 active = 1; | |
| 851 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 852 } | |
| 853 tMenuEdit_set_on_off(editId, active); | |
| 854 | |
| 855 return UPDATE_DIVESETTINGS; | |
| 856 } | |
| 857 */ | |
| 858 | |
| 859 | |
| 860 uint8_t OnAction_First(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 861 { | |
| 862 uint8_t first, i, gasOne; | |
| 863 | |
| 864 if(editGasPage.ccr) | |
| 865 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 866 else | |
| 867 gasOne = 1; | |
| 868 | |
| 869 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 870 | |
| 871 if(!first) | |
| 872 { | |
| 873 for(i=gasOne;i<NUM_GASES + gasOne;i++) | |
| 874 { | |
| 875 if(editGasPage.pGasLine[i].note.ub.first) | |
| 876 { | |
| 877 editGasPage.pGasLine[i].note.ub.first = 0; | |
| 878 editGasPage.pGasLine[i].note.ub.active = 0; | |
| 879 } | |
| 880 } | |
| 881 } | |
| 882 | |
| 883 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 1; | |
| 884 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 885 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 886 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
887 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 888 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 889 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 890 | |
| 891 tMenuEdit_set_on_off(StMOG_First, 1); | |
| 892 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 893 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 894 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
895 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
896 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
897 #endif |
| 38 | 898 |
| 899 if(!first) | |
| 900 return UPDATE_DIVESETTINGS; | |
| 901 else | |
| 902 return UPDATE_AND_EXIT_TO_MENU; | |
| 903 } | |
| 904 | |
| 905 | |
| 906 uint8_t OnAction_Deco(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 907 { | |
| 908 uint8_t first, deco, gasOne; | |
| 909 | |
| 910 if(editGasPage.ccr) | |
| 911 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 912 else | |
| 913 gasOne = 1; | |
| 914 | |
| 915 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 916 deco = editGasPage.pGasLine[editGasPage.gasID].note.ub.deco; | |
| 917 | |
| 918 if(first) | |
| 919 { | |
| 920 if(editGasPage.gasID == gasOne) | |
| 921 return UNSPECIFIC_RETURN; | |
| 922 else | |
| 923 { | |
| 924 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 925 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 926 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 927 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 928 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 929 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 930 } | |
| 931 } | |
| 932 | |
| 933 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 934 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 935 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 1; | |
| 936 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
937 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 938 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; |
| 939 editGasPage.mod = calc_MOD(editGasPage.gasID); | |
| 940 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 941 | |
| 942 /* | |
| 943 if(deco) | |
| 944 { | |
| 945 editGasPage.pGasLine[editGasPage.gasID].depth_meter = editGasPage.mod; | |
| 946 tMenuEdit_newInput(StMOG_ChangeDepth, editGasPage.pGasLine[editGasPage.gasID].depth_meter, 0, 0, 0); | |
| 947 } | |
| 948 */ | |
| 949 | |
| 950 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 951 tMenuEdit_set_on_off(StMOG_Deco, 1); | |
| 952 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 953 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
954 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
955 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
956 #endif |
| 38 | 957 |
| 958 if(!deco) | |
| 959 return UPDATE_DIVESETTINGS; | |
| 960 else | |
| 961 return UPDATE_AND_EXIT_TO_MENU; | |
| 962 } | |
| 963 | |
| 964 | |
| 965 uint8_t OnAction_Travel(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 966 { | |
| 967 uint8_t first, travel, gasOne; | |
| 968 | |
| 969 if(editGasPage.ccr) | |
| 970 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 971 else | |
| 972 gasOne = 1; | |
| 973 | |
| 974 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 975 travel = editGasPage.pGasLine[editGasPage.gasID].note.ub.travel; | |
| 976 | |
| 977 if(first) | |
| 978 { | |
| 979 if(editGasPage.gasID == gasOne) | |
| 980 return UNSPECIFIC_RETURN; | |
| 981 else | |
| 982 { | |
| 983 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 984 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 985 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 986 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 987 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 988 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 989 } | |
| 990 } | |
| 991 | |
| 992 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 993 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 1; | |
| 994 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 995 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 1; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
996 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 997 editGasPage.pGasLine[editGasPage.gasID].depth_meter = 0; |
| 998 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = 0; | |
| 999 | |
| 1000 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 1001 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 1002 tMenuEdit_set_on_off(StMOG_Travel, 1); | |
| 1003 tMenuEdit_set_on_off(StMOG_Inactive, 0); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1004 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1005 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1006 #endif |
| 38 | 1007 |
| 1008 if(!travel) | |
| 1009 return UPDATE_DIVESETTINGS; | |
| 1010 else | |
| 1011 return UPDATE_AND_EXIT_TO_MENU; | |
| 1012 } | |
| 1013 | |
| 1014 | |
| 1015 uint8_t OnAction_Inactive(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1016 { | |
| 1017 uint8_t first, inactive, gasOne; | |
| 1018 | |
| 1019 if(editGasPage.ccr) | |
| 1020 gasOne = 1 + NUM_OFFSET_DILUENT; | |
| 1021 else | |
| 1022 gasOne = 1; | |
| 1023 | |
| 1024 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; | |
| 1025 | |
| 1026 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.active) | |
| 1027 inactive = 0; | |
| 1028 else | |
| 1029 inactive = 1; | |
| 1030 | |
| 1031 if(first) | |
| 1032 { | |
| 1033 if(editGasPage.gasID == gasOne) | |
| 1034 return UNSPECIFIC_RETURN; | |
| 1035 else | |
| 1036 { | |
| 1037 editGasPage.pGasLine[gasOne].note.ub.first = 1; | |
| 1038 editGasPage.pGasLine[gasOne].note.ub.active = 1; | |
| 1039 editGasPage.pGasLine[gasOne].note.ub.deco = 0; | |
| 1040 editGasPage.pGasLine[gasOne].note.ub.travel = 0; | |
| 1041 editGasPage.pGasLine[gasOne].depth_meter = 0; | |
| 1042 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; | |
| 1043 } | |
| 1044 } | |
| 1045 | |
| 1046 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; | |
| 1047 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; | |
| 1048 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; | |
| 1049 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1050 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 0; |
| 38 | 1051 |
| 1052 tMenuEdit_set_on_off(StMOG_First, 0); | |
| 1053 tMenuEdit_set_on_off(StMOG_Deco, 0); | |
| 1054 tMenuEdit_set_on_off(StMOG_Travel, 0); | |
| 1055 tMenuEdit_set_on_off(StMOG_Inactive, 1); | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1056 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1057 tMenuEdit_set_on_off(StMOG_Off, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1058 #endif |
| 38 | 1059 if(!inactive) |
| 1060 return UPDATE_DIVESETTINGS; | |
| 1061 else | |
| 1062 return UPDATE_AND_EXIT_TO_MENU; | |
| 1063 } | |
| 1064 | |
|
528
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1065 uint8_t OnAction_Off (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1066 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1067 uint8_t first, off, gasOne; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1068 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1069 if(editGasPage.ccr) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1070 gasOne = 1 + NUM_OFFSET_DILUENT; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1071 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1072 gasOne = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1073 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1074 first = editGasPage.pGasLine[editGasPage.gasID].note.ub.first; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1075 off =editGasPage.pGasLine[editGasPage.gasID].note.ub.off; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1076 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1077 if(first) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1078 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1079 if(editGasPage.gasID == gasOne) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1080 return UNSPECIFIC_RETURN; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1081 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1082 { |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1083 editGasPage.pGasLine[gasOne].note.ub.first = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1084 editGasPage.pGasLine[gasOne].note.ub.active = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1085 editGasPage.pGasLine[gasOne].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1086 editGasPage.pGasLine[gasOne].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1087 editGasPage.pGasLine[gasOne].depth_meter = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1088 editGasPage.pGasLine[gasOne].depth_meter_travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1089 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1090 } |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1091 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1092 editGasPage.pGasLine[editGasPage.gasID].note.ub.first = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1093 editGasPage.pGasLine[editGasPage.gasID].note.ub.active = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1094 editGasPage.pGasLine[editGasPage.gasID].note.ub.deco = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1095 editGasPage.pGasLine[editGasPage.gasID].note.ub.travel = 0; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1096 editGasPage.pGasLine[editGasPage.gasID].note.ub.off = 1; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1097 |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1098 tMenuEdit_set_on_off(StMOG_First, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1099 tMenuEdit_set_on_off(StMOG_Deco, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1100 tMenuEdit_set_on_off(StMOG_Travel, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1101 tMenuEdit_set_on_off(StMOG_Inactive, 0); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1102 #ifdef ENABLE_UNUSED_GAS_HIDING |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1103 tMenuEdit_set_on_off(StMOG_Off, 1); |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1104 #endif |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1105 if(!off) |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1106 return UPDATE_DIVESETTINGS; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1107 else |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1108 return UPDATE_AND_EXIT_TO_MENU; |
|
a9c195be907e
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
344
diff
changeset
|
1109 } |
| 38 | 1110 |
| 1111 uint8_t OnAction_SetToMOD (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1112 { | |
| 1113 uint8_t newChangeDepth = editGasPage.mod; | |
| 1114 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1115 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.travel) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1116 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1117 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel= newChangeDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1118 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1119 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1120 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1121 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newChangeDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1122 } |
| 38 | 1123 tMenuEdit_newInput(StMOG_ChangeDepth, unit_depth_integer(newChangeDepth), 0, 0, 0); |
| 1124 | |
| 1125 return UPDATE_DIVESETTINGS; | |
| 1126 } | |
| 1127 | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1128 uint8_t OnAction_CalcDeco (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1129 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1130 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.decocalc) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1131 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1132 editGasPage.pGasLine[editGasPage.gasID].note.ub.decocalc = 0; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1133 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1134 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1135 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1136 editGasPage.pGasLine[editGasPage.gasID].note.ub.decocalc = 1; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1137 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1138 tMenuEdit_set_on_off(editId, editGasPage.pGasLine[editGasPage.gasID].note.ub.decocalc); |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1139 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1140 return UPDATE_DIVESETTINGS; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1141 } |
| 38 | 1142 |
| 1143 uint8_t OnAction_ChangeDepth(uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1144 { | |
| 1145 uint8_t digitContentNew; | |
| 1146 uint32_t newDepth; | |
| 1147 | |
| 1148 if(action == ACTION_BUTTON_ENTER) | |
| 1149 { | |
| 1150 return digitContent; | |
| 1151 } | |
| 1152 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1153 { | |
| 1154 evaluateNewString(editId, &newDepth, 0, 0, 0); | |
| 1155 if(settingsGetPointer()->nonMetricalSystem != 0) // new hw 170703 | |
| 1156 { | |
| 1157 newDepth += 2; // f�r rundung | |
| 1158 newDepth = (newDepth * 3) / 10; | |
| 1159 } | |
| 1160 if(newDepth > 255) | |
| 1161 newDepth = 255; | |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1162 |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1163 if(editGasPage.pGasLine[editGasPage.gasID].note.ub.travel) |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1164 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1165 editGasPage.pGasLine[editGasPage.gasID].depth_meter_travel = newDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1166 } |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1167 else |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1168 { |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1169 editGasPage.pGasLine[editGasPage.gasID].depth_meter = newDepth; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
773
diff
changeset
|
1170 } |
| 38 | 1171 tMenuEdit_newInput(editId, unit_depth_integer(newDepth), 0, 0, 0); |
| 1172 return UPDATE_DIVESETTINGS; | |
| 1173 } | |
| 1174 if(action == ACTION_BUTTON_NEXT) | |
| 1175 { | |
| 1176 digitContentNew = digitContent + 1; | |
| 1177 if(digitContentNew > '9') | |
| 1178 digitContentNew = '0'; | |
| 1179 return digitContentNew; | |
| 1180 } | |
| 1181 if(action == ACTION_BUTTON_BACK) | |
| 1182 { | |
| 1183 digitContentNew = digitContent - 1; | |
| 1184 if(digitContentNew < '0') | |
| 1185 digitContentNew = '9'; | |
| 1186 return digitContentNew; | |
| 1187 } | |
| 1188 | |
| 1189 return UNSPECIFIC_RETURN; | |
| 1190 } | |
| 1191 | |
| 1192 | |
| 1193 uint8_t OnAction_BottleSize (uint32_t editId, uint8_t blockNumber, uint8_t digitNumber, uint8_t digitContent, uint8_t action) | |
| 1194 { | |
| 1195 int8_t digitContentNew; | |
| 1196 uint32_t newBottleSize; | |
| 1197 // const uint8_t validSize = {4,7,8,10,12,15,16,17,20,24,30,40,255}; | |
| 1198 const uint8_t validSize[] = {40,30,24,20,17,16,15,12,10,8,7,4,0}; | |
| 1199 | |
| 1200 if(action == ACTION_BUTTON_ENTER) | |
| 1201 { | |
| 1202 return digitContent; | |
| 1203 } | |
| 1204 if(action == ACTION_BUTTON_ENTER_FINAL) | |
| 1205 { | |
| 1206 evaluateNewString(editId, &newBottleSize, 0, 0, 0); | |
| 1207 | |
| 1208 if(newBottleSize > validSize[0]) | |
| 1209 newBottleSize = validSize[0]; | |
| 1210 | |
| 1211 editGasPage.pGasLine[editGasPage.gasID].bottle_size_liter = newBottleSize; | |
| 1212 | |
| 1213 tMenuEdit_newInput(editId, newBottleSize, 0, 0, 0); | |
| 1214 return UPDATE_DIVESETTINGS; | |
| 1215 } | |
| 1216 if(action == ACTION_BUTTON_NEXT) | |
| 1217 { | |
| 1218 // new here for ease of comparison | |
| 1219 digitContentNew = digitContent - '0'; | |
| 1220 | |
| 1221 if(digitContentNew > 0) | |
| 1222 { | |
| 1223 int i = 0; | |
| 1224 while(digitContentNew < validSize[i]) | |
| 1225 { | |
| 1226 i++; | |
| 1227 } | |
| 1228 if(i == 0) | |
| 1229 digitContentNew = 0; // off | |
| 1230 else | |
| 1231 digitContentNew = validSize[i-1]; | |
| 1232 } | |
| 1233 else | |
| 1234 { | |
| 1235 int i = 0; | |
| 1236 while(validSize[i] != 0) | |
| 1237 i++; | |
| 1238 digitContentNew = validSize[i-1]; // smallest tank | |
| 1239 } | |
| 1240 digitContentNew += '0'; | |
| 1241 return digitContentNew; | |
| 1242 } | |
| 1243 if(action == ACTION_BUTTON_BACK) | |
| 1244 { | |
| 1245 // new here for ease of comparison | |
| 1246 digitContentNew = digitContent - '0'; | |
| 1247 if(digitContentNew > 0) | |
| 1248 { | |
| 1249 int i = 0; | |
| 1250 while(digitContentNew < validSize[i]) | |
| 1251 { | |
| 1252 i++; | |
| 1253 } | |
| 1254 if(validSize[i] == 0) | |
| 1255 digitContentNew = 0; // off | |
| 1256 else if(validSize[i+1] == 0) | |
| 1257 digitContentNew = 0; // off | |
| 1258 else | |
| 1259 digitContentNew = validSize[i+1]; | |
| 1260 } | |
| 1261 else | |
| 1262 { | |
| 1263 digitContentNew = validSize[0]; | |
| 1264 } | |
| 1265 digitContentNew += '0'; | |
| 1266 | |
| 1267 return digitContentNew; | |
| 1268 } | |
| 1269 return EXIT_TO_MENU; | |
| 1270 } | |
| 1271 | |
| 1272 | |
| 1273 /* Private functions ---------------------------------------------------------*/ | |
| 1274 | |
| 1275 | |
| 1276 void create_text_with_u8(char *text, const char *text1, uint8_t inputU8, const char *text2) | |
| 1277 { | |
| 1278 uint8_t digit1, digit2, digit3, count; | |
| 1279 | |
| 1280 count = 0; | |
| 1281 | |
| 1282 if(*text1) | |
| 1283 { | |
| 1284 strcpy(&text[count], text1); | |
| 1285 count = strlen(text1); | |
| 1286 } | |
| 1287 | |
| 1288 digit1 = inputU8 / 100; | |
| 1289 inputU8 -= digit1 * 100; | |
| 1290 digit2 = inputU8 / 10; | |
| 1291 inputU8 -= digit2 * 10; | |
| 1292 digit3 = inputU8; | |
| 1293 if(digit1) | |
| 1294 text[count++] = '0' + digit1; | |
| 1295 if(count || digit2) | |
| 1296 text[count++] = '0' + digit2; | |
| 1297 text[count++] = '0' + digit3; | |
| 1298 | |
| 1299 if(*text2) | |
| 1300 { | |
| 1301 strcpy(&text[count], text2); | |
| 1302 } | |
| 1303 } |