Mercurial > public > ostc4
annotate Discovery/Src/show_logbook.c @ 250:822416168585 bm-2
Buelmann: new implementation for ceiling
Since my first functional fix in the ceiling computation in
commit ceecabfddb57, I noticed that the computation used a
linear search, that became rather computational expensive after
that commit. The simple question is: why not a binary search?
So, this commit implements the binary search. But there is a long
story attached to this. Comparing ceiling results from hwOS and this
OSTC4 code were very different. Basically, the original OSTC4
algorithm computed the ceiling using the same GFlow to GFhigh
slope, in such a way, that the ceiling was in sync with the
presented deco stops, where the hwOS code presents a GFhigh
based ceiling.
This said, it is more logical when the OSTC4 and hwOS code give
similar results. This new recursive algorithm gives very similar
results for the ceiling compared to hwOS.
To be complete here, the Buelmann ceiling is the depth to which
you can ascend, so that the leading tissue reaches GFhigh. This
also explains why the deepest deco stop is normally deeper than
the ceiling (unless one dives with GF like 80/80).
The code implemented here is rather straightforward recursion.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Thu, 11 Apr 2019 17:48:48 +0200 |
| parents | f11f0bf6ef2d |
| children | 5a633dece17a |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/show_logbook.c | |
| 5 /// \brief show_logbook_logbook_show_log_page1 / | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 07-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include "base.h" | |
| 30 #include "logbook.h" | |
| 31 #include "gfx_colors.h" | |
| 32 #include "gfx_engine.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "show_logbook.h" | |
| 35 #include "unit.h" | |
| 36 | |
| 37 #include <stdint.h> | |
| 38 #include <stdio.h> | |
| 39 #include <stdlib.h> // for abs() | |
| 40 | |
| 41 /* Private variables ---------------------------------------------------------*/ | |
| 42 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
43 static GFX_DrawCfgScreen tLOGscreen; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
44 static GFX_DrawCfgScreen tLOGbackground; |
| 38 | 45 |
| 46 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
47 static void print_gas_name(char* output,uint8_t lengh,uint8_t oxygen,uint8_t helium); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
48 static int16_t get_colour(int16_t color); |
| 38 | 49 |
| 50 /* Overview */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
51 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 52 /* Temperature */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
53 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 54 /* Gas List */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
55 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 56 /* ppO2 */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
57 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 58 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
59 static inline uint32_t MaxU32LOG(uint32_t a, uint32_t b) |
| 38 | 60 { |
| 61 return((a>b)?a:b); | |
| 62 } | |
| 63 | |
| 64 /** | |
| 65 ****************************************************************************** | |
| 66 * @brief GFX write label. / print coordinate system & depth graph | |
| 67 * @author Peter Ryser | |
| 68 * @version V0.0.1 | |
| 69 * @date 07-July-2014 | |
| 70 ****************************************************************************** | |
| 71 * | |
| 72 * @param hgfx: | |
| 73 * @param window: WindowGimpStyle | |
| 74 * @param mode: different modes depending witch page uses the function | |
| 75 * @param dataLength: | |
| 76 * @param depthdata: | |
| 77 * @param colordata: 1 | |
| 78 * @retval None | |
| 79 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
80 static void show_logbook_draw_depth_graph(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards, SWindowGimpStyle* window, short mode, uint16_t dataLength, uint16_t* depthdata, uint8_t * colordata, uint16_t * decostopdata) |
| 38 | 81 { |
| 82 SLogbookHeader logbookHeader; | |
| 83 SWindowGimpStyle wintemp = *window; | |
| 84 SWindowGimpStyle winsmal; | |
| 85 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 86 int divetime = logbookHeader.diveTimeMinutes; | |
| 87 int maxDepth = logbookHeader.maxDepth/100; | |
| 88 | |
| 89 int16_t saveBottom = wintemp.bottom; | |
| 90 int16_t saveTop = 0 - wintemp.top; | |
| 91 | |
| 92 //*** Horisontal (depth) *************************************************** | |
| 93 | |
| 94 //--- calc depth lines and labels -- | |
| 95 int vscale = 0; | |
| 96 int vstep = 0; | |
| 97 | |
| 98 vstep = maxDepth / 5; | |
| 99 vscale = vstep * 5; | |
| 100 if(vscale < maxDepth) | |
| 101 { | |
| 102 vstep += 1; | |
| 103 vscale += 5; | |
| 104 } | |
| 105 /* | |
| 106 if(vscale < | |
| 107 for(int i=1; i <= 20; i++) | |
| 108 { | |
| 109 vscale = i * 25; | |
| 110 vstep = i * 5; | |
| 111 if( vscale > maxDepth) | |
| 112 break; | |
| 113 } | |
| 114 */ | |
| 115 //--- print depth labels --- | |
| 116 winsmal.left = wintemp.left - 48; | |
| 117 winsmal.top = wintemp.top - 3; | |
| 118 winsmal.right = wintemp.left -1; | |
| 119 winsmal.bottom = winsmal.top + 16; | |
| 120 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
121 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[m]"); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
122 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
123 // winsmal.left = wintemp.left - 48; |
| 38 | 124 char msg[3]; |
| 125 float deltaline = ((float)(wintemp.bottom - wintemp.top))/5; | |
| 126 for(int i = 1; i<=5; i++) | |
| 127 { | |
| 128 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 129 winsmal.bottom = winsmal.top + 16; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
130 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
131 // winsmal.right = wintemp.left - 2; |
| 38 | 132 snprintf(msg,5,"%i",i * vstep); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
133 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 134 } |
| 135 | |
| 136 //vertical (Time) ******************************************************************* | |
| 137 //--- calc time lines and labels -- | |
| 138 int timestep = 0; | |
| 139 int lines = 0; | |
| 140 for(int i=1; i <= 60; i++) | |
| 141 { | |
| 142 timestep = i * 5; | |
| 143 lines = divetime/timestep; | |
| 144 if(lines < 7) | |
| 145 { | |
| 146 break; | |
| 147 } | |
| 148 } | |
| 149 //*** print coordinate system grit *** | |
| 150 int winwidth = wintemp.right - wintemp.left; | |
| 151 float vdeltaline = ((float)(winwidth * timestep))/divetime; | |
| 152 GFX_draw_Grid( &tLOGbackground,wintemp, 0, vdeltaline, 5,0, CLUT_LogbookGrid); | |
| 153 | |
| 154 | |
| 155 //--- print time labels --- | |
| 156 winsmal.left = wintemp.left; | |
| 157 winsmal.top = wintemp.top - 40; | |
| 158 winsmal.right = winsmal.left + 60; | |
| 159 winsmal.bottom = winsmal.top + 16; | |
| 160 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
161 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"min"); |
| 38 | 162 for(int i = 1; i<=lines; i++) |
| 163 { | |
| 164 winsmal.left= wintemp.left + vdeltaline * i - 15; | |
| 165 winsmal.right = winsmal.left + 30; | |
| 166 snprintf(msg,5,"%3i",i * timestep); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
167 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 168 } |
| 169 winsmal.left = wintemp.left;// - 9; | |
| 170 winsmal.top = wintemp.top - 40; | |
| 171 winsmal.right = winsmal.left + 60; | |
| 172 | |
| 173 //--- print depth graph --- | |
| 174 //adapt window | |
| 175 int winhight = wintemp.bottom - wintemp.top; | |
| 176 int newhight = (winhight * maxDepth)/vscale; | |
| 177 wintemp.bottom = wintemp.top + newhight; | |
| 178 //wintemp.fontcolor = LOGBOOK_GRAPH_DEPTH; | |
| 179 | |
| 180 int datamax = 0; | |
| 181 for(int i=0;i<dataLength;i++) | |
| 182 { | |
| 183 if(depthdata[i]>datamax) | |
| 184 datamax = depthdata[i]; | |
| 185 } | |
| 186 | |
| 187 if(decostopdata) | |
| 188 { | |
| 189 if(dataLength <= 1000) | |
| 190 { | |
| 191 uint8_t colortemp[1000]; | |
| 192 | |
| 193 for(int i = 0; i<dataLength; i++) | |
| 194 { | |
| 195 if(decostopdata[i] > depthdata[i]) | |
| 196 { | |
| 197 colortemp[i] = CLUT_WarningRed; | |
| 198 } | |
| 199 else | |
| 200 { | |
| 201 colortemp[i] = CLUT_NiceGreen; | |
| 202 } | |
| 203 } | |
|
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
150
diff
changeset
|
204 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, 0, colortemp); |
| 38 | 205 } |
| 206 else | |
| 207 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, CLUT_NiceGreen, NULL); | |
| 208 } | |
| 209 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
210 if(settingsGetPointer()->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
211 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
212 winsmal.right = 800 - wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
213 winsmal.left = 800 - wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
214 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
215 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
216 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
217 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
218 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
219 winsmal.right = wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
220 winsmal.left = wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
221 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
222 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
223 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
224 |
| 38 | 225 switch(mode) |
| 226 { | |
| 227 case 0: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
228 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 229 break; |
| 230 case 1: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
231 GFX_graph_print(hgfx,&winsmal,saveBottom,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 232 break; |
| 233 case 2: | |
| 234 if(*colordata) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
235 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 236 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
237 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 238 } |
| 239 } | |
| 240 | |
| 241 | |
| 242 | |
| 243 /** | |
| 244 ****************************************************************************** | |
| 245 * @brief scaleAdapt | |
| 246 * @author heinrichs weikamp gmbh | |
| 247 * @version V0.0.1 | |
| 248 * @date 29-Nov-2016 | |
| 249 ****************************************************************************** | |
| 250 * | |
| 251 * @param ... | |
| 252 * @retval *OutputStepOfScale, *OutputMaxValueOnScale, *OutputTop, *OutputBottom | |
| 253 | |
| 254 * fit to multiples of 1�C (data format is 1/10�C) | |
| 255 */ | |
| 256 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
257 static void scaleAdapt( int InputTop, int InputBottom, |
| 38 | 258 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 259 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 260 { | |
| 261 // uint16_t oldScale; | |
| 262 uint16_t newScale; | |
| 263 // uint16_t diff_newScale; | |
| 264 | |
| 265 // int16_t oldMaxOnScale; | |
| 266 int16_t newMaxOnScale; | |
| 267 // int16_t diff_newMaxOnScale; | |
| 268 _Bool negativeMaxValue = 0; | |
| 269 | |
| 270 // float oldRange; | |
| 271 float newRange; | |
| 272 | |
| 273 float sizeOfScreen; | |
| 274 // float InputTopValue; | |
| 275 // float InputBottomValue; | |
| 276 float screenToRangeRatio; | |
| 277 float diffOutMaxToMaxOnScale; | |
| 278 float diffOutMinToMaxOnScale; | |
| 279 int positonOutputMaxValue; | |
| 280 int positonOutputMinValue; | |
| 281 | |
| 282 | |
| 283 // scale | |
| 284 // oldScale = *OutputStepOfScale; | |
| 285 newScale = *OutputStepOfScale + 9; | |
| 286 newScale /= 10; | |
| 287 newScale *= 10; | |
| 288 // diff_newScale = newScale - *OutputStepOfScale; | |
| 289 // oldRange = 5 * oldScale; | |
| 290 newRange = 5 * newScale; | |
| 291 *OutputStepOfScale = newScale; | |
| 292 | |
| 293 // MaxValueOnScale | |
| 294 // oldMaxOnScale = *OutputMaxValueOnScale; | |
| 295 if(OutputMaxValueOnScale < 0) | |
| 296 { | |
| 297 negativeMaxValue = 1; | |
| 298 newMaxOnScale = 0 - *OutputMaxValueOnScale; | |
| 299 } | |
| 300 else | |
| 301 { | |
| 302 negativeMaxValue = 0; | |
| 303 newMaxOnScale = *OutputMaxValueOnScale; | |
| 304 } | |
| 305 newMaxOnScale += 9; | |
| 306 newMaxOnScale /= 10; | |
| 307 newMaxOnScale *= 10; | |
| 308 if(negativeMaxValue) | |
| 309 { | |
| 310 // diff_newMaxOnScale = newMaxOnScale + *OutputMaxValueOnScale; | |
| 311 *OutputMaxValueOnScale = 0 - newMaxOnScale; | |
| 312 } | |
| 313 else | |
| 314 { | |
| 315 // diff_newMaxOnScale = newMaxOnScale - *OutputMaxValueOnScale; | |
| 316 *OutputMaxValueOnScale = newMaxOnScale; | |
| 317 } | |
| 318 | |
| 319 | |
| 320 // new coordinates | |
| 321 sizeOfScreen = 1 + InputBottom - InputTop; | |
| 322 // InputTopValue = *OutputMaxValueOnScale; | |
| 323 // InputBottomValue = InputTopValue + (6 * *OutputStepOfScale); | |
| 324 | |
| 325 screenToRangeRatio = sizeOfScreen / newRange; | |
| 326 diffOutMaxToMaxOnScale = abs(*OutputMaxValueOnScale) - abs(*OutputMaxValue); | |
| 327 // diffOutMinToMax = abs(*OutputMinValue - *OutputMaxValue); | |
| 328 diffOutMinToMaxOnScale = abs(*OutputMaxValueOnScale - *OutputMinValue); | |
| 329 | |
| 330 positonOutputMaxValue = (int)(diffOutMaxToMaxOnScale * screenToRangeRatio); | |
| 331 positonOutputMaxValue += *OutputTop; | |
| 332 positonOutputMinValue = (int)(diffOutMinToMaxOnScale * screenToRangeRatio); | |
| 333 positonOutputMinValue += *OutputTop; | |
| 334 // positonOutputMinValue = (int)(diffOutMinToMax * screenToRangeRatio); | |
| 335 // positonOutputMinValue += positonOutputMaxValue; | |
| 336 *OutputTop = positonOutputMaxValue; | |
| 337 *OutputBottom = positonOutputMinValue; | |
| 338 } | |
| 339 | |
| 340 | |
| 341 /** | |
| 342 ****************************************************************************** | |
| 343 * @brief scaleHelper | |
| 344 * @author heinrichs weikamp gmbh | |
| 345 * @version V0.0.1 | |
| 346 * @date 13-Oct-2016 | |
| 347 ****************************************************************************** | |
| 348 * | |
| 349 * @param hgfx: | |
| 350 * @retval None | |
| 351 | |
| 352 * pixel 50 oben | |
| 353 * pixel 439 unten | |
| 354 * pixel 390 gesamt h�he | |
| 355 | |
| 356 * for temperature, input is �C * 10 | |
| 357 */ | |
| 358 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
359 static void scaleHelper( uint16_t InputDataLength, int16_t *InputDataArray, int InputTop, int InputBottom, |
| 38 | 360 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 361 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 362 { | |
| 363 int32_t datamin = INT16_MAX; // 32 bit for delta calculation ( delta is unsigned -> value can be 2x INT16_MAX) | |
| 364 int32_t datamax = INT16_MIN; | |
| 365 uint16_t deltaMinMax = 1; | |
| 366 // uint16_t deltaMinMaxUsed = 1; | |
| 367 // uint16_t digits = 1; | |
| 368 // uint16_t scaler = 1; | |
| 369 uint32_t step = 1; | |
| 370 const int sizeOfScreen = InputBottom - InputTop; | |
| 371 float pixel2range = 1.0; | |
| 372 | |
| 373 // min, max, deltaMinMax, OutputMinValue, OutputMaxValue | |
| 374 for(uint16_t i = 0; i < InputDataLength; i++) | |
| 375 { | |
| 376 if(InputDataArray[i] > datamax) | |
| 377 datamax = InputDataArray[i]; | |
| 378 | |
| 379 if(InputDataArray[i] < datamin) | |
| 380 datamin = InputDataArray[i]; | |
| 381 } | |
| 382 | |
| 383 deltaMinMax = (uint16_t)(datamax - datamin); | |
| 384 | |
| 385 *OutputMinValue = (int16_t)datamin; | |
| 386 *OutputMaxValue = (int16_t)datamax; | |
| 387 | |
| 388 // step | |
| 389 step = deltaMinMax / 5; | |
| 390 while(deltaMinMax > (step * 5)) | |
| 391 { | |
| 392 step += 1; | |
| 393 } | |
| 394 pixel2range = ((float)sizeOfScreen) / (step * 5); | |
| 395 | |
| 396 *OutputStepOfScale = (uint16_t)step; | |
| 397 *OutputMaxValueOnScale = *OutputMaxValue; | |
| 398 *OutputTop = InputTop; | |
| 399 *OutputBottom = ((int)(pixel2range * deltaMinMax)) + *OutputTop; | |
| 400 } | |
| 401 | |
| 402 /** | |
| 403 ****************************************************************************** | |
| 404 * @brief show_logbook_logbook_show_log_page1 / | |
| 405 * @author Peter Ryser | |
| 406 * @version V0.0.1 | |
| 407 * @date 07-July-2014 | |
| 408 ****************************************************************************** | |
| 409 * | |
| 410 * @param hgfx: | |
| 411 * @retval None | |
| 412 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
413 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx,uint8_t StepBackwards) |
| 38 | 414 { |
| 415 SWindowGimpStyle wintemp; | |
| 416 SWindowGimpStyle winsmal; | |
| 417 wintemp.left = 50; | |
| 418 wintemp.right = 799 - wintemp.left; | |
| 419 wintemp.top = 50; | |
| 420 wintemp.bottom = 479 - 40; | |
| 421 | |
| 422 SLogbookHeader logbookHeader; | |
| 423 logbook_getHeader(StepBackwards ,&logbookHeader); | |
| 424 | |
| 425 uint16_t depthdata[1000] = { 0 }; | |
| 426 uint8_t gasdata[1000] = { 0 }; | |
| 427 int16_t tempdata[1000] = { 0 }; | |
| 428 | |
| 429 uint16_t dataLength = 0; | |
| 430 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 431 | |
| 432 //Print Date | |
| 433 uint8_t year = logbookHeader.dateYear; | |
| 434 uint8_t month = logbookHeader.dateMonth; | |
| 435 uint8_t day = logbookHeader.dateDay; | |
| 436 char text[40]; | |
| 437 snprintf(text, 20, "20%02i-%02i-%02i", year, month, day); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
438 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
439 Gfx_write_label_var(hgfx, 30, 250,10, &FontT42,CLUT_GasSensor1,text); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
440 |
| 38 | 441 |
| 442 // Print logbook number with offset | |
| 443 if(settingsGetPointer()->logbookOffset) | |
| 444 { | |
| 445 int32_t logNumber; | |
| 446 logNumber = settingsGetPointer()->logbookOffset - StepBackwards; | |
| 447 if(logNumber < 0) | |
| 448 logNumber = 0; | |
| 449 else | |
| 450 if(logNumber > 9999) | |
| 451 logNumber = 9999; | |
| 452 | |
| 453 snprintf(text,20,"#%i",logNumber); | |
| 454 Gfx_write_label_var(hgfx, 300, 590,10, &FontT42,CLUT_GasSensor1,text); | |
| 455 } | |
| 456 | |
| 457 //Print time | |
| 458 uint8_t hour = logbookHeader.timeHour; | |
| 459 uint8_t minute = logbookHeader.timeMinute; | |
| 460 snprintf(text,20,"%02i:%02i",hour,minute); | |
| 461 Gfx_write_label_var(hgfx, 600, 749,10, &FontT42,CLUT_GasSensor1,text); | |
| 462 | |
| 463 //Print Dive Mode (OC/CCR/...) | |
| 464 switch(logbookHeader.diveMode) | |
| 465 { | |
| 466 case DIVEMODE_OC: | |
| 467 snprintf(text,20,"open circuit"); | |
| 468 break; | |
| 469 case DIVEMODE_CCR: | |
| 470 snprintf(text,20,"closed circuit"); | |
| 471 break; | |
| 472 case DIVEMODE_Gauge: | |
| 473 snprintf(text,20,"Gauge"); | |
| 474 break; | |
| 475 case DIVEMODE_Apnea: | |
| 476 snprintf(text,20,"Apnea"); | |
| 477 break; | |
| 478 } | |
| 479 Gfx_write_label_var(hgfx, 30, 250,60, &FontT42,CLUT_GasSensor4,text); | |
| 480 | |
| 481 // Decomodel | |
| 482 if(logbookHeader.diveMode <= DIVEMODE_CCR) | |
| 483 { | |
| 484 switch(logbookHeader.decoModel) | |
| 485 { | |
| 486 case GF_MODE: | |
| 487 snprintf(text,20,"\002GF%u/%u",logbookHeader.gfLow_or_Vpm_conservatism,logbookHeader.gfHigh); | |
| 488 break; | |
| 489 case VPM_MODE: | |
| 490 snprintf(text,20,"\002VPM +%u",logbookHeader.gfLow_or_Vpm_conservatism); | |
| 491 break; | |
| 492 } | |
| 493 Gfx_write_label_var(hgfx, 600, 729,60, &FontT42,CLUT_GasSensor1,text); | |
| 494 } | |
| 495 | |
| 496 //Write Dive Time | |
| 497 int minutes = logbookHeader.diveTimeMinutes; | |
| 498 int seconds = logbookHeader.diveTimeSeconds; | |
| 499 int hours = minutes/60; | |
| 500 minutes -= hours * 60; | |
| 501 snprintf(text,20,"%02i:%02i:%02i",hours,minutes,seconds); | |
| 502 Gfx_write_label_var(hgfx, 30, 250,360, &FontT42,CLUT_GasSensor1,text); | |
| 503 Gfx_write_label_var(hgfx, 200, 250,360, &FontT42,CLUT_GasSensor4,"s"); | |
| 504 | |
| 505 // Max Depth | |
| 506 int maxdepth =logbookHeader.maxDepth/100; | |
| 507 int maxdepth_dcm = logbookHeader.maxDepth/10 - maxdepth * 10; | |
| 508 int top = 150; | |
| 509 if(settingsGetPointer()->nonMetricalSystem) | |
| 510 { | |
| 511 float maxDepthFeet = 0; | |
| 512 maxDepthFeet = unit_depth_float(((float)logbookHeader.maxDepth)/100); | |
| 513 snprintf(text,20,"%.0f",maxDepthFeet); | |
| 514 } | |
| 515 else | |
| 516 { | |
| 517 snprintf(text,20,"%i.%i",maxdepth,maxdepth_dcm); | |
| 518 } | |
| 519 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 520 winsmal.left = 30; | |
| 521 winsmal.top = top -3; | |
| 522 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
523 |
| 38 | 524 if(maxdepth < 10) |
| 525 { | |
| 526 winsmal.left = 137; | |
| 527 } | |
| 528 else if(maxdepth < 100) | |
| 529 { | |
| 530 winsmal.left = 151; | |
| 531 } | |
| 532 else | |
| 533 { | |
| 534 winsmal.left = 147; | |
| 535 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
536 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
537 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
538 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,top, &FontT24,CLUT_GasSensor4,"max"); |
| 38 | 539 snprintf(text,3,"%c%c" |
| 540 , unit_depth_char1() | |
| 541 , unit_depth_char2() | |
| 542 ); | |
| 543 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 544 | |
| 545 // Average Depth | |
| 546 int avrdepth =logbookHeader.averageDepth_mbar/100; | |
| 547 int avrdepth_dcm = logbookHeader.averageDepth_mbar/10 - avrdepth * 10; | |
| 548 top = 200; | |
| 549 if(settingsGetPointer()->nonMetricalSystem) | |
| 550 { | |
| 551 float avgDepthFeet = 0; | |
| 552 avgDepthFeet = unit_depth_float(((float)logbookHeader.averageDepth_mbar)/100); | |
| 553 snprintf(text,20,"%.0f",avgDepthFeet); | |
| 554 } | |
| 555 else | |
| 556 { | |
| 557 snprintf(text,20,"%i.%i",avrdepth,avrdepth_dcm); | |
| 558 } | |
| 559 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
560 |
| 38 | 561 winsmal.left = 30; |
| 562 winsmal.top = top -3; | |
| 563 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
564 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
565 /* put avg behind previous string */ |
| 38 | 566 if(avrdepth < 10) |
| 567 { | |
| 568 winsmal.left = 137 ; | |
| 569 } | |
| 570 else if(avrdepth < 100) | |
| 571 { | |
| 572 winsmal.left = 151; | |
| 573 } | |
| 574 else | |
| 575 { | |
| 576 winsmal.left = 147; | |
| 577 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
578 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
579 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
580 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor4,"avg"); |
| 38 | 581 snprintf(text,3,"%c%c" |
| 582 , unit_depth_char1() | |
| 583 , unit_depth_char2() | |
| 584 ); | |
| 585 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 586 // Temperature | |
| 587 top+= 50; | |
| 588 float temp_Temperature; | |
| 589 uint16_t start; | |
| 590 temp_Temperature = ((float)logbookHeader.minTemp)/10; | |
| 591 snprintf(text,20,"%.1f",unit_temperature_float(temp_Temperature)); | |
| 592 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 593 | |
| 594 if(settingsGetPointer()->nonMetricalSystem) | |
| 595 start = 121; | |
| 596 else if((logbookHeader.minTemp >= 0) && (logbookHeader.minTemp < 10)) | |
| 597 start = 100; | |
| 598 else if((logbookHeader.minTemp >= -10) && (logbookHeader.minTemp < 100)) | |
| 599 start = 114; | |
| 600 else | |
| 601 start = 121; | |
| 602 | |
| 603 text[0] = '\140'; | |
| 604 if(settingsGetPointer()->nonMetricalSystem) | |
| 605 text[1] = 'F'; | |
| 606 else | |
| 607 text[1] = 'C'; | |
| 608 text[2] = 0; | |
| 609 | |
| 610 Gfx_write_label_var(hgfx, start, 300,top, &FontT42,CLUT_GasSensor4,text); | |
| 611 | |
| 612 // CNS | |
| 613 snprintf(text,20,"CNS: %i %%",logbookHeader.maxCNS); | |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
614 Gfx_write_label_var(hgfx, 30, 250,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 615 |
| 616 // Surface Pressure | |
| 617 // snprintf(text,20,"\001%i\016\016 mbar",logbookHeader.surfacePressure_mbar); | |
| 618 // Gfx_write_label_var(hgfx,300,500,750, &FontT42,CLUT_GasSensor1,text); | |
| 619 // snprintf(text,40,"%i\016\016 mbar\017 (%i\016\016 m\017)",logbookHeader.surfacePressure_mbar, unit_SeaLevelRelation_integer(logbookHeader.surfacePressure_mbar)); | |
|
102
4276d56eb37c
hPa instead of mbar, enabled Spanish language
heinrichsweikamp
parents:
38
diff
changeset
|
620 snprintf(text,40,"%i\016\016 hPa\017",logbookHeader.surfacePressure_mbar); |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
621 Gfx_write_label_var(hgfx,320,600,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 622 |
| 623 | |
| 624 //--- print coordinate system & depth graph with gaschanges --- | |
| 625 wintemp.left = 330; | |
| 626 wintemp.top = 160; | |
| 627 wintemp.bottom -= 40; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
628 |
| 38 | 629 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); |
| 630 } | |
| 631 | |
| 632 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
633 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 634 { |
| 635 //*** Page2: Depth and Temperature **** | |
| 636 | |
| 637 SWindowGimpStyle wintemp; | |
| 638 SWindowGimpStyle winsmal; | |
| 639 wintemp.left = 50; | |
| 640 wintemp.right = 799 - wintemp.left; | |
| 641 wintemp.top = 50; | |
| 642 wintemp.bottom = 479 - 40; | |
| 643 | |
| 644 SLogbookHeader logbookHeader; | |
| 645 | |
| 646 logbook_getHeader(StepBackwards,&logbookHeader); | |
| 647 uint16_t dataLength = 0; | |
| 648 uint16_t depthdata[1000]; | |
| 649 uint8_t gasdata[1000]; | |
| 650 int16_t tempdata[1000]; | |
| 651 uint16_t decoDepthdata[1000]; | |
| 652 uint16_t *pDecoDepthData = 0; | |
| 653 | |
| 654 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, decoDepthdata); | |
| 655 | |
| 656 for(int i = 0; i<dataLength; i++) | |
| 657 { | |
| 658 if(decoDepthdata[i] >= 300) | |
| 659 { | |
| 660 pDecoDepthData = decoDepthdata; | |
| 661 break; | |
| 662 } | |
| 663 } | |
| 664 //--- print coordinate system & depth graph --- | |
| 665 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, pDecoDepthData); | |
| 666 | |
| 667 //*** Temperature ************************************************* | |
| 668 | |
| 669 //--- print temperature labels --- | |
| 670 // input maxtmpline, tmpstep, deltaline | |
| 671 | |
| 672 winsmal.left = wintemp.right +6; | |
| 673 winsmal.top = wintemp.top - 3; | |
| 674 winsmal.right = wintemp.right + 30; | |
| 675 winsmal.bottom = winsmal.top + 16; | |
| 676 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
677 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[C]"); |
| 38 | 678 |
| 679 int16_t minVal = 0; | |
| 680 int16_t maxVal = 0; | |
| 681 int newTop = 0; | |
| 682 int newBottom = 0; | |
| 683 uint16_t step = 0; | |
| 684 int16_t maxValTop = 0; | |
| 685 | |
| 686 scaleHelper(dataLength, tempdata, wintemp.top, wintemp.bottom, | |
| 687 &minVal, &maxVal, &newTop, &newBottom, | |
| 688 &step, &maxValTop); // newTop is wintemp.top | |
| 689 | |
| 690 scaleAdapt( wintemp.top, wintemp.bottom, | |
| 691 &minVal, &maxVal, &newTop, &newBottom, | |
| 692 &step, &maxValTop); | |
| 693 | |
| 694 // temperature in 1/10 �C | |
| 695 int deltaline = (1 + wintemp.bottom - wintemp.top)/5; | |
| 696 char msg[3]; | |
| 697 int tmp = maxValTop; | |
| 698 for(int i = 1; i<=5; i++) | |
| 699 { | |
| 700 tmp -= step; | |
| 701 //if(tmp < 0) | |
| 702 //break; | |
| 703 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 704 winsmal.bottom = winsmal.top + 16; | |
| 705 if((tmp >= 0) && (tmp < 100)) | |
| 706 snprintf(msg,2,"%1i",tmp); | |
| 707 else | |
| 708 snprintf(msg,3,"%2i",tmp); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
709 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,msg); |
| 38 | 710 } |
| 711 | |
| 712 | |
| 713 //--- print temperature graph --- | |
| 714 // input tempdata[i], maxtmpline, mintmpline, maxTmp, minTmp, deltaline, wintemp.top, dataLength, datamax, | |
| 715 | |
| 716 //adapt window | |
| 717 wintemp.bottom = newBottom; | |
| 718 wintemp.top = newTop; | |
| 719 GFX_graph_print(hgfx,&wintemp,0,1,maxVal,minVal, (uint16_t *)tempdata,dataLength,CLUT_LogbookTemperature, NULL); | |
| 720 } | |
| 721 | |
| 722 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
723 static void build_logbook_test(uint8_t page, uint8_t StepBackwards) |
| 38 | 724 { |
| 725 uint32_t lastScreen,lastBackground; | |
| 726 | |
| 727 lastScreen = tLOGscreen.FBStartAdress; | |
| 728 lastBackground = tLOGbackground.FBStartAdress; | |
| 729 | |
| 730 tLOGscreen.FBStartAdress = getFrame(16); | |
| 731 tLOGscreen.ImageHeight = 480; | |
| 732 tLOGscreen.ImageWidth = 800; | |
| 733 tLOGscreen.LayerIndex = 1; | |
| 734 | |
| 735 tLOGbackground.FBStartAdress = getFrame(17); | |
| 736 tLOGbackground.ImageHeight = 480; | |
| 737 tLOGbackground.ImageWidth = 800; | |
| 738 tLOGbackground.LayerIndex = 0; | |
| 739 switch(page) | |
| 740 { | |
| 741 case 1: | |
| 742 show_logbook_logbook_show_log_page1(&tLOGscreen,StepBackwards); | |
| 743 break; | |
| 744 case 2: | |
| 745 show_logbook_logbook_show_log_page2(&tLOGscreen,StepBackwards); | |
| 746 break; | |
| 747 case 3: | |
| 748 show_logbook_logbook_show_log_page3(&tLOGscreen,StepBackwards); | |
| 749 break; | |
| 750 case 4: | |
| 751 show_logbook_logbook_show_log_page4(&tLOGscreen,StepBackwards); | |
| 752 break; | |
| 753 } | |
| 754 | |
| 755 releaseFrame(16,lastScreen); | |
| 756 releaseFrame(17,lastBackground); | |
| 757 } | |
| 758 | |
| 759 | |
| 760 void show_logbook_test(_Bool firstPage, uint8_t StepBackwards) | |
| 761 { | |
| 762 static uint8_t page = 1; | |
| 763 if(firstPage) | |
| 764 { | |
| 765 page = 1; | |
| 766 } | |
| 767 else | |
| 768 { | |
| 769 page++; | |
| 770 if(page > 4) | |
| 771 page = 1; | |
| 772 } | |
| 773 | |
| 774 build_logbook_test(page,StepBackwards); | |
| 775 // GFX_ResetLayer(TOP_LAYER); | |
| 776 // GFX_ResetLayer(BACKGRD_LAYER); | |
| 777 | |
| 778 set_globalState(StILOGSHOW); | |
| 779 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); | |
| 780 } | |
| 781 | |
| 782 | |
| 783 void show_logbook_exit(void) | |
| 784 { | |
| 785 releaseFrame(16,tLOGscreen.FBStartAdress); | |
| 786 releaseFrame(17,tLOGbackground.FBStartAdress); | |
| 787 } | |
| 788 | |
| 789 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
790 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 791 { |
| 792 SWindowGimpStyle wintemp; | |
| 793 SWindowGimpStyle winsmal; | |
| 794 wintemp.left = 50; | |
| 795 wintemp.right = 799 - wintemp.left; | |
| 796 wintemp.top = 50; | |
| 797 wintemp.bottom = 479 - 40; | |
| 798 | |
| 799 SLogbookHeader logbookHeader; | |
| 800 | |
| 801 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 802 uint16_t dataLength = 0; | |
| 803 uint16_t depthdata[1000]; | |
| 804 uint8_t gasdata[1000]; | |
| 805 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 806 | |
| 807 //--- print coordinate system & depth graph with gaschanges --- | |
| 808 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); | |
| 809 | |
| 810 //--- print gas list --- | |
| 811 winsmal.left = wintemp.right - 190; | |
| 812 winsmal.right = winsmal.left + 150; | |
| 813 | |
| 814 char msg[15]; | |
| 815 char gas_name[15]; | |
| 816 int j = 0; | |
| 817 for(int i = 4;i >= 0;i--) | |
| 818 { | |
| 819 if(logbookHeader.gasordil[i].note.ub.active > 0) | |
| 820 { | |
| 821 j++; | |
| 822 winsmal.top = wintemp.bottom - 5 - j * 26 ; | |
| 823 winsmal.bottom = winsmal.top + 21 ; | |
| 824 uint8_t color = get_colour(i); | |
| 825 | |
| 826 print_gas_name(gas_name,15,logbookHeader.gasordil[i].oxygen_percentage,logbookHeader.gasordil[i].helium_percentage); | |
| 827 snprintf(msg,15,"G%i: %s",i + 1, gas_name); | |
| 828 //msg[10] = 0; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
829 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 830 } |
| 831 } | |
| 832 | |
| 833 //--- define buttons --- | |
| 834 /*if(*ghost_char_logfile_oxydata) | |
| 835 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page4, surf1_menu_logbook_show_log_next); | |
| 836 else | |
| 837 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 838 */ | |
| 839 } | |
| 840 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
841 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 842 { SWindowGimpStyle wintemp; |
| 843 SWindowGimpStyle winsmal; | |
| 844 wintemp.left = 50; | |
| 845 wintemp.right = 799 - wintemp.left; | |
| 846 wintemp.top = 50; | |
| 847 wintemp.bottom = 479 - 40; | |
| 848 uint8_t color = 0; | |
| 849 SLogbookHeader logbookHeader; | |
| 850 | |
| 851 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 852 uint16_t dataLength = 0; | |
| 853 uint16_t depthdata[1000]; | |
| 854 uint8_t gasdata[1000]; | |
| 855 uint16_t ppO2data[1000]; | |
| 856 uint16_t sensor2[1000]; | |
| 857 uint16_t sensor3[1000]; | |
| 858 uint16_t *setpoint = ppO2data; | |
| 859 uint16_t *sensor1 = ppO2data; | |
| 860 | |
| 861 | |
| 862 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
| 863 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, ppO2data, NULL, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 864 else | |
| 865 { | |
| 866 if(logbookHeader.CCRmode == CCRMODE_FixedSetpoint) | |
| 867 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, setpoint, NULL, NULL, NULL, NULL, NULL, NULL); | |
| 868 else | |
| 869 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, NULL, sensor1, sensor2, sensor3, NULL, NULL, NULL); | |
| 870 } | |
| 871 | |
| 872 | |
| 873 //--- print coordinate system & depth graph with bailout--- | |
| 874 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, NULL); | |
| 875 | |
| 876 | |
| 877 | |
| 878 //*** Desciption at bottom of page *************************** | |
| 879 winsmal.top = wintemp.bottom +2 ; | |
| 880 winsmal.bottom = winsmal.top + 16; | |
| 881 | |
| 882 | |
| 883 /*if(strcmp( (char*)ghost_char_logfile_text_oc_ccr,"ccr/bailout") == 0) | |
| 884 { | |
| 885 winsmal.left = wintemp.left + 2; | |
| 886 winsmal.right = winsmal.left + 55; | |
| 887 | |
| 888 oled_write(OVERLAY, &winsmal,"CCR -",false,true); | |
| 889 | |
| 890 winsmal.left = winsmal.right; | |
| 891 winsmal.right = winsmal.left + 90; | |
| 892 //winsmal.fontcolor = oled_get_colour(15); | |
| 893 oled_write(OVERLAY, &winsmal,"bailout",false,true); | |
| 894 } | |
| 895 else*/ | |
| 896 { | |
| 897 winsmal.left = wintemp.left + 2; | |
| 898 winsmal.right = winsmal.left + 55; | |
| 899 color = CLUT_GasSensor1;//LOGBOOK_GRAPH_DEPTH; | |
| 900 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
901 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"depth"); |
| 38 | 902 |
| 903 } | |
| 904 winsmal.left = 799 - 67;//wintemp.right -67; | |
| 905 winsmal.right = winsmal.left;// + 45; | |
| 906 | |
| 907 color = CLUT_LogbookTemperature;//LOGBOOK_GRAPH_DEPTH; | |
| 908 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
909 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002PP O2"); |
| 38 | 910 else |
| 911 if(logbookHeader.CCRmode != CCRMODE_Sensors) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
912 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SETPOINT"); |
| 38 | 913 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
914 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SENSORS"); |
| 38 | 915 |
| 916 //*** PP O2 **************************************************** | |
| 917 //calc lines and labels | |
| 918 int datamax = 0; | |
| 919 int datamin = 10000; | |
| 920 for(int i=1;i<dataLength;i++) | |
| 921 { | |
| 922 if(ppO2data[i]>datamax) | |
| 923 datamax = ppO2data[i]; | |
| 924 if(ppO2data[i]<datamin) | |
| 925 datamin = ppO2data[i]; | |
| 926 } | |
| 927 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 928 { | |
| 929 for(int i=1;i<dataLength;i++) | |
| 930 { | |
| 931 if(sensor2[i]>datamax) | |
| 932 datamax = sensor2[i]; | |
| 933 if(sensor2[i]<datamin) | |
| 934 datamin = sensor2[i]; | |
| 935 if(sensor3[i]>datamax) | |
| 936 datamax = sensor3[i]; | |
| 937 if(sensor3[i]<datamin) | |
| 938 datamin = sensor3[i]; | |
| 939 } | |
| 940 } | |
| 941 float maxoxy = ((float)datamax)/100; | |
| 942 float minoxy = ((float)datamin)/100; | |
| 943 float oxystep = 0.5; | |
| 944 float maxoxyline = 2.5; | |
| 945 | |
| 946 //--- print PP O2 labels ---- | |
| 947 winsmal.left = wintemp.right + 2; | |
| 948 winsmal.top = wintemp.top ; | |
| 949 winsmal.right = wintemp.right + 30; | |
| 950 winsmal.bottom = winsmal.top + 16; | |
| 951 //winsmal.font = ft_tiny + ft_SLIM; | |
| 952 color = CLUT_LogbookTemperature;// = LOGBOOK_GRAPH_TEMP; | |
| 953 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
954 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"bar"); |
| 38 | 955 |
| 956 int deltaline = (wintemp.bottom - wintemp.top)/5; | |
| 957 char msg[4]; | |
| 958 float oxy = maxoxyline; | |
| 959 for(int i = 1; i<=5; i++) | |
| 960 { | |
| 961 oxy -= oxystep; | |
| 962 if(oxy < 0) | |
| 963 break; | |
| 964 winsmal.top = wintemp.top + deltaline * i - 8; | |
| 965 winsmal.bottom = winsmal.top + 16; | |
| 966 snprintf(msg,4,"%1.1f",oxy); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
967 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 968 //oled_write(OVERLAY, &winsmal,msg,false,true); |
| 969 } | |
| 970 | |
| 971 //--- print PP O2 graph --- | |
| 972 //Adapt window | |
| 973 float ftmp = ((maxoxyline - minoxy) * deltaline) /oxystep + wintemp.top; | |
| 974 wintemp.bottom = ftmp; | |
| 975 if((ftmp - (int)ftmp) >= 0.5f) | |
| 976 wintemp.bottom++; | |
| 977 | |
| 978 ftmp = wintemp.top + ((maxoxyline - maxoxy) * deltaline) /oxystep; | |
| 979 wintemp.top = ftmp; | |
| 980 if((ftmp - (int)ftmp) >= 0.5f) | |
| 981 wintemp.top++; | |
| 982 wintemp.top = MaxU32LOG(wintemp.top ,0); | |
| 983 if(wintemp.top < wintemp.bottom) | |
| 984 { | |
| 985 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 986 { | |
| 987 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 988 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor2,dataLength,CLUT_LogbookTemperature, NULL); | |
| 989 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor3,dataLength,CLUT_LogbookTemperature, NULL); | |
| 990 } | |
| 991 else | |
| 992 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 993 } | |
| 994 else | |
| 995 { | |
| 996 point_t startPoint, stopPoint; | |
| 997 startPoint.x = wintemp.left; | |
| 998 stopPoint.x = wintemp.right; | |
| 999 stopPoint.y = startPoint.y = 479 - wintemp.top; | |
| 1000 GFX_draw_colorline(hgfx, startPoint, stopPoint, CLUT_LogbookTemperature); | |
| 1001 } | |
| 1002 | |
| 1003 //--- define buttons --- | |
| 1004 //button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 1005 } | |
| 1006 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1007 static void print_gas_name(char* output,uint8_t length,uint8_t oxygen,uint8_t helium) |
| 38 | 1008 { |
| 1009 if(helium == 0) | |
| 1010 { | |
| 1011 if(oxygen == 21) | |
| 1012 snprintf(output, length, "Air"); | |
| 1013 else if(oxygen == 100) | |
| 1014 snprintf(output, length, "Oxy"); | |
| 1015 else | |
| 1016 snprintf(output, length, "NX%i",oxygen); | |
| 1017 } | |
| 1018 else | |
| 1019 { | |
| 1020 if((oxygen + helium) == 100) | |
| 1021 snprintf(output, length, "HX%i",oxygen); | |
| 1022 else | |
| 1023 snprintf(output, length, "TMX%i/%i", oxygen, helium); | |
| 1024 } | |
| 1025 | |
| 1026 } | |
| 1027 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1028 static int16_t get_colour(int16_t color) |
| 38 | 1029 { |
| 1030 return CLUT_GasSensor1 + color; | |
| 1031 } |