Mercurial > public > ostc4
annotate Discovery/Src/show_logbook.c @ 634:7c73f066cd16
Enable sensor check for Analog PPO2 mode:
Checks which may trigger a fallback warning were not activated in previous versions. Beside enabling the checks the test logic has been changed. Before the change an avarage was build automatically using the remaining both sensors if one sensor failed. The scenario that also one of the remaining sensors may be out of bounds was not covered. The new implementation allows an out of bounds detection for all sensors in parallel. In that special case the last valid value will be used until the diver takes action (Fallback warning)
| author | Ideenmodellierer |
|---|---|
| date | Wed, 24 Feb 2021 19:18:26 +0100 |
| parents | 2586f7b734f4 |
| children | 269e57ac4e56 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/show_logbook.c | |
| 5 /// \brief show_logbook_logbook_show_log_page1 / | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 07-July-2014 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include "base.h" | |
| 30 #include "logbook.h" | |
| 31 #include "gfx_colors.h" | |
| 32 #include "gfx_engine.h" | |
| 33 #include "gfx_fonts.h" | |
| 34 #include "show_logbook.h" | |
| 35 #include "unit.h" | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
36 #include "configuration.h" |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
37 #include "logbook_miniLive.h" |
| 38 | 38 |
| 39 #include <stdint.h> | |
| 40 #include <stdio.h> | |
| 41 #include <stdlib.h> // for abs() | |
| 42 | |
| 484 | 43 #define LOG_BORDER_OFFSET (50u) /* text offset from left / right display to text start/end */ |
| 44 | |
| 38 | 45 /* Private variables ---------------------------------------------------------*/ |
| 46 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
47 static GFX_DrawCfgScreen tLOGscreen; |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
48 static GFX_DrawCfgScreen tLOGbackground; |
| 38 | 49 |
| 50 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
51 static void print_gas_name(char* output,uint8_t lengh,uint8_t oxygen,uint8_t helium); |
|
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
52 static int16_t get_colour(int16_t color); |
| 38 | 53 |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
54 static uint8_t active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
55 static uint8_t active_log_offset = 0; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
56 |
| 38 | 57 /* Overview */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
58 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 59 /* Temperature */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
60 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 61 /* Gas List */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
62 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 63 /* ppO2 */ |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
64 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards); |
| 38 | 65 |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
66 static inline uint32_t MaxU32LOG(uint32_t a, uint32_t b) |
| 38 | 67 { |
| 68 return((a>b)?a:b); | |
| 69 } | |
| 70 | |
| 71 /** | |
| 72 ****************************************************************************** | |
| 73 * @brief GFX write label. / print coordinate system & depth graph | |
| 74 * @author Peter Ryser | |
| 75 * @version V0.0.1 | |
| 76 * @date 07-July-2014 | |
| 77 ****************************************************************************** | |
| 78 * | |
| 79 * @param hgfx: | |
| 80 * @param window: WindowGimpStyle | |
| 81 * @param mode: different modes depending witch page uses the function | |
| 82 * @param dataLength: | |
| 83 * @param depthdata: | |
| 84 * @param colordata: 1 | |
| 85 * @retval None | |
| 86 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
87 static void show_logbook_draw_depth_graph(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards, SWindowGimpStyle* window, short mode, uint16_t dataLength, uint16_t* depthdata, uint8_t * colordata, uint16_t * decostopdata) |
| 38 | 88 { |
| 89 SLogbookHeader logbookHeader; | |
| 90 SWindowGimpStyle wintemp = *window; | |
| 91 SWindowGimpStyle winsmal; | |
| 92 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 93 int divetime = logbookHeader.diveTimeMinutes; | |
| 94 int maxDepth = logbookHeader.maxDepth/100; | |
| 95 | |
| 96 int16_t saveBottom = wintemp.bottom; | |
| 97 int16_t saveTop = 0 - wintemp.top; | |
| 98 | |
| 99 //*** Horisontal (depth) *************************************************** | |
| 100 | |
| 101 //--- calc depth lines and labels -- | |
| 102 int vscale = 0; | |
| 103 int vstep = 0; | |
| 104 | |
| 105 vstep = maxDepth / 5; | |
| 106 vscale = vstep * 5; | |
| 107 if(vscale < maxDepth) | |
| 108 { | |
| 109 vstep += 1; | |
| 110 vscale += 5; | |
| 111 } | |
| 112 /* | |
| 113 if(vscale < | |
| 114 for(int i=1; i <= 20; i++) | |
| 115 { | |
| 116 vscale = i * 25; | |
| 117 vstep = i * 5; | |
| 118 if( vscale > maxDepth) | |
| 119 break; | |
| 120 } | |
| 121 */ | |
| 122 //--- print depth labels --- | |
| 123 winsmal.left = wintemp.left - 48; | |
| 124 winsmal.top = wintemp.top - 3; | |
| 125 winsmal.right = wintemp.left -1; | |
| 126 winsmal.bottom = winsmal.top + 16; | |
| 127 | |
| 567 | 128 if(settingsGetPointer()->nonMetricalSystem) |
| 129 { | |
| 130 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[ft]"); | |
| 131 } | |
| 132 else | |
| 133 { | |
| 134 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"[m]"); | |
| 135 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
136 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
137 // winsmal.left = wintemp.left - 48; |
| 632 | 138 char msg[10]; |
| 38 | 139 float deltaline = ((float)(wintemp.bottom - wintemp.top))/5; |
| 140 for(int i = 1; i<=5; i++) | |
| 141 { | |
| 142 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 143 winsmal.bottom = winsmal.top + 16; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
144 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
145 // winsmal.right = wintemp.left - 2; |
| 632 | 146 snprintf(msg,10,"%i",unit_depth_integer(i * vstep)); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
147 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 148 } |
| 149 | |
| 150 //vertical (Time) ******************************************************************* | |
| 151 //--- calc time lines and labels -- | |
| 152 int timestep = 0; | |
| 153 int lines = 0; | |
| 154 for(int i=1; i <= 60; i++) | |
| 155 { | |
| 156 timestep = i * 5; | |
| 157 lines = divetime/timestep; | |
| 158 if(lines < 7) | |
| 159 { | |
| 160 break; | |
| 161 } | |
| 162 } | |
| 163 //*** print coordinate system grit *** | |
| 164 int winwidth = wintemp.right - wintemp.left; | |
| 165 float vdeltaline = ((float)(winwidth * timestep))/divetime; | |
| 166 GFX_draw_Grid( &tLOGbackground,wintemp, 0, vdeltaline, 5,0, CLUT_LogbookGrid); | |
| 167 | |
| 168 | |
| 169 //--- print time labels --- | |
| 170 winsmal.left = wintemp.left; | |
| 171 winsmal.top = wintemp.top - 40; | |
| 172 winsmal.right = winsmal.left + 60; | |
| 173 winsmal.bottom = winsmal.top + 16; | |
| 174 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
175 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,"min"); |
| 38 | 176 for(int i = 1; i<=lines; i++) |
| 177 { | |
| 178 winsmal.left= wintemp.left + vdeltaline * i - 15; | |
| 179 winsmal.right = winsmal.left + 30; | |
| 632 | 180 snprintf(msg,10,"%3i",i * timestep); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
181 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor1,msg); |
| 38 | 182 } |
| 183 winsmal.left = wintemp.left;// - 9; | |
| 184 winsmal.top = wintemp.top - 40; | |
| 185 winsmal.right = winsmal.left + 60; | |
| 186 | |
| 187 //--- print depth graph --- | |
| 188 //adapt window | |
| 189 int winhight = wintemp.bottom - wintemp.top; | |
| 190 int newhight = (winhight * maxDepth)/vscale; | |
| 191 wintemp.bottom = wintemp.top + newhight; | |
| 192 //wintemp.fontcolor = LOGBOOK_GRAPH_DEPTH; | |
| 193 | |
| 194 int datamax = 0; | |
| 195 for(int i=0;i<dataLength;i++) | |
| 196 { | |
| 197 if(depthdata[i]>datamax) | |
| 198 datamax = depthdata[i]; | |
| 199 } | |
| 200 | |
| 201 if(decostopdata) | |
| 202 { | |
| 203 if(dataLength <= 1000) | |
| 204 { | |
| 205 uint8_t colortemp[1000]; | |
| 206 | |
| 207 for(int i = 0; i<dataLength; i++) | |
| 208 { | |
| 209 if(decostopdata[i] > depthdata[i]) | |
| 210 { | |
| 211 colortemp[i] = CLUT_WarningRed; | |
| 212 } | |
| 213 else | |
| 214 { | |
| 215 colortemp[i] = CLUT_NiceGreen; | |
| 216 } | |
| 217 } | |
|
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
150
diff
changeset
|
218 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, 0, colortemp); |
| 38 | 219 } |
| 220 else | |
| 221 GFX_graph_print(hgfx,&wintemp,saveTop,1,0,datamax, decostopdata,dataLength, CLUT_NiceGreen, NULL); | |
| 222 } | |
| 223 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
224 if(settingsGetPointer()->FlipDisplay) |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
225 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
226 winsmal.right = 800 - wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
227 winsmal.left = 800 - wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
228 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
229 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
230 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
231 else |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
232 { |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
233 winsmal.right = wintemp.right; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
234 winsmal.left = wintemp.left; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
235 winsmal.bottom = wintemp.bottom; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
236 winsmal.top = wintemp.top; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
237 } |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
238 |
| 38 | 239 switch(mode) |
| 240 { | |
| 241 case 0: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
242 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 243 break; |
| 244 case 1: | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
245 GFX_graph_print(hgfx,&winsmal,saveBottom,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 246 break; |
| 247 case 2: | |
| 248 if(*colordata) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
249 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor0,colordata); |
| 38 | 250 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
251 GFX_graph_print(hgfx,&winsmal,0,1,0,datamax, depthdata,dataLength,CLUT_GasSensor1, NULL); |
| 38 | 252 } |
| 253 } | |
| 254 | |
| 255 | |
| 256 | |
| 257 /** | |
| 258 ****************************************************************************** | |
| 259 * @brief scaleAdapt | |
| 260 * @author heinrichs weikamp gmbh | |
| 261 * @version V0.0.1 | |
| 262 * @date 29-Nov-2016 | |
| 263 ****************************************************************************** | |
| 264 * | |
| 265 * @param ... | |
| 266 * @retval *OutputStepOfScale, *OutputMaxValueOnScale, *OutputTop, *OutputBottom | |
| 267 | |
| 268 * fit to multiples of 1�C (data format is 1/10�C) | |
| 269 */ | |
| 270 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
271 static void scaleAdapt( int InputTop, int InputBottom, |
| 38 | 272 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 273 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 274 { | |
| 275 // uint16_t oldScale; | |
| 276 uint16_t newScale; | |
| 277 // uint16_t diff_newScale; | |
| 278 | |
| 279 // int16_t oldMaxOnScale; | |
| 280 int16_t newMaxOnScale; | |
| 281 // int16_t diff_newMaxOnScale; | |
| 282 _Bool negativeMaxValue = 0; | |
| 283 | |
| 284 // float oldRange; | |
| 285 float newRange; | |
| 286 | |
| 287 float sizeOfScreen; | |
| 288 // float InputTopValue; | |
| 289 // float InputBottomValue; | |
| 290 float screenToRangeRatio; | |
| 291 float diffOutMaxToMaxOnScale; | |
| 292 float diffOutMinToMaxOnScale; | |
| 293 int positonOutputMaxValue; | |
| 294 int positonOutputMinValue; | |
| 295 | |
| 296 | |
| 297 // scale | |
| 298 // oldScale = *OutputStepOfScale; | |
| 299 newScale = *OutputStepOfScale + 9; | |
| 300 newScale /= 10; | |
| 301 newScale *= 10; | |
| 302 // diff_newScale = newScale - *OutputStepOfScale; | |
| 303 // oldRange = 5 * oldScale; | |
| 304 newRange = 5 * newScale; | |
| 305 *OutputStepOfScale = newScale; | |
| 306 | |
| 307 // MaxValueOnScale | |
| 308 // oldMaxOnScale = *OutputMaxValueOnScale; | |
| 309 if(OutputMaxValueOnScale < 0) | |
| 310 { | |
| 311 negativeMaxValue = 1; | |
| 312 newMaxOnScale = 0 - *OutputMaxValueOnScale; | |
| 313 } | |
| 314 else | |
| 315 { | |
| 316 negativeMaxValue = 0; | |
| 317 newMaxOnScale = *OutputMaxValueOnScale; | |
| 318 } | |
| 319 newMaxOnScale += 9; | |
| 320 newMaxOnScale /= 10; | |
| 321 newMaxOnScale *= 10; | |
| 322 if(negativeMaxValue) | |
| 323 { | |
| 324 // diff_newMaxOnScale = newMaxOnScale + *OutputMaxValueOnScale; | |
| 325 *OutputMaxValueOnScale = 0 - newMaxOnScale; | |
| 326 } | |
| 327 else | |
| 328 { | |
| 329 // diff_newMaxOnScale = newMaxOnScale - *OutputMaxValueOnScale; | |
| 330 *OutputMaxValueOnScale = newMaxOnScale; | |
| 331 } | |
| 332 | |
| 333 | |
| 334 // new coordinates | |
| 335 sizeOfScreen = 1 + InputBottom - InputTop; | |
| 336 // InputTopValue = *OutputMaxValueOnScale; | |
| 337 // InputBottomValue = InputTopValue + (6 * *OutputStepOfScale); | |
| 338 | |
| 339 screenToRangeRatio = sizeOfScreen / newRange; | |
| 340 diffOutMaxToMaxOnScale = abs(*OutputMaxValueOnScale) - abs(*OutputMaxValue); | |
| 341 // diffOutMinToMax = abs(*OutputMinValue - *OutputMaxValue); | |
| 342 diffOutMinToMaxOnScale = abs(*OutputMaxValueOnScale - *OutputMinValue); | |
| 343 | |
| 344 positonOutputMaxValue = (int)(diffOutMaxToMaxOnScale * screenToRangeRatio); | |
| 345 positonOutputMaxValue += *OutputTop; | |
| 346 positonOutputMinValue = (int)(diffOutMinToMaxOnScale * screenToRangeRatio); | |
| 347 positonOutputMinValue += *OutputTop; | |
| 348 // positonOutputMinValue = (int)(diffOutMinToMax * screenToRangeRatio); | |
| 349 // positonOutputMinValue += positonOutputMaxValue; | |
| 350 *OutputTop = positonOutputMaxValue; | |
| 351 *OutputBottom = positonOutputMinValue; | |
| 352 } | |
| 353 | |
| 354 | |
| 355 /** | |
| 356 ****************************************************************************** | |
| 357 * @brief scaleHelper | |
| 358 * @author heinrichs weikamp gmbh | |
| 359 * @version V0.0.1 | |
| 360 * @date 13-Oct-2016 | |
| 361 ****************************************************************************** | |
| 362 * | |
| 363 * @param hgfx: | |
| 364 * @retval None | |
| 365 | |
| 366 * pixel 50 oben | |
| 367 * pixel 439 unten | |
| 368 * pixel 390 gesamt h�he | |
| 369 | |
| 370 * for temperature, input is �C * 10 | |
| 371 */ | |
| 372 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
373 static void scaleHelper( uint16_t InputDataLength, int16_t *InputDataArray, int InputTop, int InputBottom, |
| 38 | 374 int16_t *OutputMinValue, int16_t *OutputMaxValue, int *OutputTop, int *OutputBottom, |
| 375 uint16_t *OutputStepOfScale, int16_t *OutputMaxValueOnScale) | |
| 376 { | |
| 377 int32_t datamin = INT16_MAX; // 32 bit for delta calculation ( delta is unsigned -> value can be 2x INT16_MAX) | |
| 378 int32_t datamax = INT16_MIN; | |
| 379 uint16_t deltaMinMax = 1; | |
| 380 // uint16_t deltaMinMaxUsed = 1; | |
| 381 // uint16_t digits = 1; | |
| 382 // uint16_t scaler = 1; | |
| 383 uint32_t step = 1; | |
| 384 const int sizeOfScreen = InputBottom - InputTop; | |
| 385 float pixel2range = 1.0; | |
| 386 | |
| 387 // min, max, deltaMinMax, OutputMinValue, OutputMaxValue | |
| 388 for(uint16_t i = 0; i < InputDataLength; i++) | |
| 389 { | |
| 390 if(InputDataArray[i] > datamax) | |
| 391 datamax = InputDataArray[i]; | |
| 392 | |
| 393 if(InputDataArray[i] < datamin) | |
| 394 datamin = InputDataArray[i]; | |
| 395 } | |
| 396 | |
| 397 deltaMinMax = (uint16_t)(datamax - datamin); | |
| 398 | |
| 399 *OutputMinValue = (int16_t)datamin; | |
| 400 *OutputMaxValue = (int16_t)datamax; | |
| 401 | |
| 402 // step | |
| 403 step = deltaMinMax / 5; | |
| 404 while(deltaMinMax > (step * 5)) | |
| 405 { | |
| 406 step += 1; | |
| 407 } | |
| 408 pixel2range = ((float)sizeOfScreen) / (step * 5); | |
| 409 | |
| 410 *OutputStepOfScale = (uint16_t)step; | |
| 411 *OutputMaxValueOnScale = *OutputMaxValue; | |
| 412 *OutputTop = InputTop; | |
| 413 *OutputBottom = ((int)(pixel2range * deltaMinMax)) + *OutputTop; | |
| 414 } | |
| 415 | |
| 416 /** | |
| 417 ****************************************************************************** | |
| 418 * @brief show_logbook_logbook_show_log_page1 / | |
| 419 * @author Peter Ryser | |
| 420 * @version V0.0.1 | |
| 421 * @date 07-July-2014 | |
| 422 ****************************************************************************** | |
| 423 * | |
| 424 * @param hgfx: | |
| 425 * @retval None | |
| 426 */ | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
427 static void show_logbook_logbook_show_log_page1(GFX_DrawCfgScreen *hgfx,uint8_t StepBackwards) |
| 38 | 428 { |
| 429 SWindowGimpStyle wintemp; | |
| 430 SWindowGimpStyle winsmal; | |
| 484 | 431 wintemp.left = LOG_BORDER_OFFSET; |
| 38 | 432 wintemp.right = 799 - wintemp.left; |
| 484 | 433 wintemp.top = LOG_BORDER_OFFSET; |
| 38 | 434 wintemp.bottom = 479 - 40; |
| 567 | 435 char timeSuffix; |
| 436 uint8_t hoursToDisplay; | |
| 38 | 437 |
| 438 SLogbookHeader logbookHeader; | |
| 439 logbook_getHeader(StepBackwards ,&logbookHeader); | |
| 440 | |
| 441 uint16_t depthdata[1000] = { 0 }; | |
| 442 uint8_t gasdata[1000] = { 0 }; | |
| 443 int16_t tempdata[1000] = { 0 }; | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
444 uint16_t tankdata[1000] = { 0 }; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
445 |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
446 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
447 uint16_t bottlePressureStart = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
448 uint16_t bottlePressureEnd = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
449 uint16_t loop = 0; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
450 #endif |
| 38 | 451 |
| 452 uint16_t dataLength = 0; | |
| 610 | 453 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, tankdata,NULL); |
| 38 | 454 |
| 455 //Print Date | |
| 456 uint8_t year = logbookHeader.dateYear; | |
| 457 uint8_t month = logbookHeader.dateMonth; | |
| 458 uint8_t day = logbookHeader.dateDay; | |
| 459 char text[40]; | |
| 460 snprintf(text, 20, "20%02i-%02i-%02i", year, month, day); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
461 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
462 Gfx_write_label_var(hgfx, 30, 250,10, &FontT42,CLUT_GasSensor1,text); |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
463 |
| 38 | 464 |
| 465 // Print logbook number with offset | |
| 466 if(settingsGetPointer()->logbookOffset) | |
| 467 { | |
| 468 int32_t logNumber; | |
| 469 logNumber = settingsGetPointer()->logbookOffset - StepBackwards; | |
| 470 if(logNumber < 0) | |
| 471 logNumber = 0; | |
| 472 else | |
| 473 if(logNumber > 9999) | |
| 474 logNumber = 9999; | |
| 475 | |
| 457 | 476 snprintf(text,20,"#%ld",logNumber); |
| 38 | 477 Gfx_write_label_var(hgfx, 300, 590,10, &FontT42,CLUT_GasSensor1,text); |
| 478 } | |
| 479 | |
| 480 //Print time | |
| 481 uint8_t minute = logbookHeader.timeMinute; | |
| 567 | 482 |
| 483 if (settingsGetPointer()->amPMTime) | |
| 484 { | |
| 485 if (logbookHeader.timeHour > 11) | |
| 486 { | |
| 487 timeSuffix = 'P'; | |
| 488 } | |
| 489 else | |
| 490 { | |
| 491 timeSuffix = 'A'; | |
| 492 } | |
| 493 | |
| 494 if (logbookHeader.timeHour % 12 == 0) | |
| 495 { | |
| 496 hoursToDisplay = 12; | |
| 497 } | |
| 498 else | |
| 499 { | |
| 500 hoursToDisplay = (logbookHeader.timeHour % 12); | |
| 501 } | |
| 502 | |
| 503 snprintf(text,20,"\002%02i:%02i %cM",hoursToDisplay,minute,timeSuffix); | |
| 504 } | |
| 505 else | |
| 506 { | |
| 507 hoursToDisplay = logbookHeader.timeHour; | |
| 508 snprintf(text,20,"\002%02i:%02i",hoursToDisplay,minute); | |
| 509 } | |
| 510 | |
| 511 | |
| 484 | 512 Gfx_write_label_var(hgfx, 600, wintemp.right,10, &FontT42,CLUT_GasSensor1,text); |
| 38 | 513 |
| 514 //Print Dive Mode (OC/CCR/...) | |
| 515 switch(logbookHeader.diveMode) | |
| 516 { | |
| 517 case DIVEMODE_OC: | |
| 518 snprintf(text,20,"open circuit"); | |
| 519 break; | |
| 520 case DIVEMODE_CCR: | |
| 521 snprintf(text,20,"closed circuit"); | |
| 522 break; | |
| 523 case DIVEMODE_Gauge: | |
| 524 snprintf(text,20,"Gauge"); | |
| 525 break; | |
| 526 case DIVEMODE_Apnea: | |
| 527 snprintf(text,20,"Apnea"); | |
| 528 break; | |
| 529 } | |
| 530 Gfx_write_label_var(hgfx, 30, 250,60, &FontT42,CLUT_GasSensor4,text); | |
| 531 | |
| 532 // Decomodel | |
| 533 if(logbookHeader.diveMode <= DIVEMODE_CCR) | |
| 534 { | |
| 535 switch(logbookHeader.decoModel) | |
| 536 { | |
| 537 case GF_MODE: | |
| 538 snprintf(text,20,"\002GF%u/%u",logbookHeader.gfLow_or_Vpm_conservatism,logbookHeader.gfHigh); | |
| 484 | 539 break; |
| 38 | 540 case VPM_MODE: |
| 541 snprintf(text,20,"\002VPM +%u",logbookHeader.gfLow_or_Vpm_conservatism); | |
| 484 | 542 break; |
| 543 default: | |
| 544 snprintf(text,20," "); /* no information to be displayed */ | |
| 545 break; | |
| 38 | 546 } |
| 484 | 547 Gfx_write_label_var(hgfx, 500, wintemp.right,60, &FontT42,CLUT_GasSensor1,text); |
| 38 | 548 } |
| 549 | |
| 550 //Write Dive Time | |
| 551 int minutes = logbookHeader.diveTimeMinutes; | |
| 552 int seconds = logbookHeader.diveTimeSeconds; | |
| 553 int hours = minutes/60; | |
| 554 minutes -= hours * 60; | |
| 555 snprintf(text,20,"%02i:%02i:%02i",hours,minutes,seconds); | |
| 556 Gfx_write_label_var(hgfx, 30, 250,360, &FontT42,CLUT_GasSensor1,text); | |
| 557 Gfx_write_label_var(hgfx, 200, 250,360, &FontT42,CLUT_GasSensor4,"s"); | |
| 558 | |
| 559 // Max Depth | |
| 560 int maxdepth =logbookHeader.maxDepth/100; | |
| 561 int maxdepth_dcm = logbookHeader.maxDepth/10 - maxdepth * 10; | |
| 562 int top = 150; | |
| 563 if(settingsGetPointer()->nonMetricalSystem) | |
| 564 { | |
| 565 float maxDepthFeet = 0; | |
| 566 maxDepthFeet = unit_depth_float(((float)logbookHeader.maxDepth)/100); | |
| 567 snprintf(text,20,"%.0f",maxDepthFeet); | |
| 568 } | |
| 569 else | |
| 570 { | |
| 571 snprintf(text,20,"%i.%i",maxdepth,maxdepth_dcm); | |
| 572 } | |
| 573 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 574 winsmal.left = 30; | |
| 575 winsmal.top = top -3; | |
| 576 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
577 |
| 38 | 578 if(maxdepth < 10) |
| 579 { | |
| 580 winsmal.left = 137; | |
| 581 } | |
| 582 else if(maxdepth < 100) | |
| 583 { | |
| 584 winsmal.left = 151; | |
| 585 } | |
| 586 else | |
| 587 { | |
| 588 winsmal.left = 147; | |
| 589 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
590 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
591 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
592 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,top, &FontT24,CLUT_GasSensor4,"max"); |
| 38 | 593 snprintf(text,3,"%c%c" |
| 594 , unit_depth_char1() | |
| 595 , unit_depth_char2() | |
| 596 ); | |
| 597 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 598 | |
| 599 // Average Depth | |
| 600 int avrdepth =logbookHeader.averageDepth_mbar/100; | |
| 601 int avrdepth_dcm = logbookHeader.averageDepth_mbar/10 - avrdepth * 10; | |
| 602 top = 200; | |
| 603 if(settingsGetPointer()->nonMetricalSystem) | |
| 604 { | |
| 605 float avgDepthFeet = 0; | |
| 606 avgDepthFeet = unit_depth_float(((float)logbookHeader.averageDepth_mbar)/100); | |
| 607 snprintf(text,20,"%.0f",avgDepthFeet); | |
| 608 } | |
| 609 else | |
| 610 { | |
| 611 snprintf(text,20,"%i.%i",avrdepth,avrdepth_dcm); | |
| 612 } | |
| 613 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
614 |
| 38 | 615 winsmal.left = 30; |
| 616 winsmal.top = top -3; | |
| 617 winsmal.bottom = winsmal.top + FontT42.height; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
618 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
619 /* put avg behind previous string */ |
| 38 | 620 if(avrdepth < 10) |
| 621 { | |
| 622 winsmal.left = 137 ; | |
| 623 } | |
| 624 else if(avrdepth < 100) | |
| 625 { | |
| 626 winsmal.left = 151; | |
| 627 } | |
| 628 else | |
| 629 { | |
| 630 winsmal.left = 147; | |
| 631 } | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
632 winsmal.right = winsmal.left + 50; |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
633 |
|
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
634 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_GasSensor4,"avg"); |
| 38 | 635 snprintf(text,3,"%c%c" |
| 636 , unit_depth_char1() | |
| 637 , unit_depth_char2() | |
| 638 ); | |
| 639 Gfx_write_label_var(hgfx, winsmal.left - 37, 250,top, &FontT42,CLUT_GasSensor4,text); | |
| 640 // Temperature | |
| 641 top+= 50; | |
| 642 float temp_Temperature; | |
| 643 uint16_t start; | |
| 644 temp_Temperature = ((float)logbookHeader.minTemp)/10; | |
| 645 snprintf(text,20,"%.1f",unit_temperature_float(temp_Temperature)); | |
| 646 Gfx_write_label_var(hgfx, 30, 250,top, &FontT42,CLUT_GasSensor1,text); | |
| 647 | |
| 648 if(settingsGetPointer()->nonMetricalSystem) | |
| 649 start = 121; | |
| 650 else if((logbookHeader.minTemp >= 0) && (logbookHeader.minTemp < 10)) | |
| 651 start = 100; | |
| 652 else if((logbookHeader.minTemp >= -10) && (logbookHeader.minTemp < 100)) | |
| 653 start = 114; | |
| 654 else | |
| 655 start = 121; | |
| 656 | |
| 657 text[0] = '\140'; | |
| 658 if(settingsGetPointer()->nonMetricalSystem) | |
| 659 text[1] = 'F'; | |
| 660 else | |
| 661 text[1] = 'C'; | |
| 662 text[2] = 0; | |
| 663 | |
| 664 Gfx_write_label_var(hgfx, start, 300,top, &FontT42,CLUT_GasSensor4,text); | |
| 665 | |
| 666 // CNS | |
| 667 snprintf(text,20,"CNS: %i %%",logbookHeader.maxCNS); | |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
668 Gfx_write_label_var(hgfx, 30, 250,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 669 |
| 670 // Surface Pressure | |
| 671 // snprintf(text,20,"\001%i\016\016 mbar",logbookHeader.surfacePressure_mbar); | |
| 672 // Gfx_write_label_var(hgfx,300,500,750, &FontT42,CLUT_GasSensor1,text); | |
| 673 // snprintf(text,40,"%i\016\016 mbar\017 (%i\016\016 m\017)",logbookHeader.surfacePressure_mbar, unit_SeaLevelRelation_integer(logbookHeader.surfacePressure_mbar)); | |
|
102
4276d56eb37c
hPa instead of mbar, enabled Spanish language
heinrichsweikamp
parents:
38
diff
changeset
|
674 snprintf(text,40,"%i\016\016 hPa\017",logbookHeader.surfacePressure_mbar); |
|
150
097d7146b779
Place CNS and pressure within the screen (avoid clipping)
Ideenmodellierer
parents:
115
diff
changeset
|
675 Gfx_write_label_var(hgfx,320,600,440, &FontT42,CLUT_GasSensor1,text); |
| 38 | 676 |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
677 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
678 /* show symbol in case log entry is marked for usage in profile custom view */ |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
679 snprintf(text,10,"\002>"); |
|
616
a594a778c883
Development bugfix: show replay symbol only for the selected dive:
Ideenmodellierer
parents:
610
diff
changeset
|
680 if(StepBackwards == getReplayOffset()) |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
681 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
682 Gfx_write_label_var(hgfx,750,799,440, &FontT42,CLUT_GasSensor1,text); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
683 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
684 else |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
685 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
686 Gfx_write_label_var(hgfx,750,799,440, &FontT42,CLUT_MenuTopBackground,text); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
687 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
688 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
689 |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
690 /* Show tank info */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
691 #ifdef ENABLE_BOTTLE_SENSOR |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
692 for(loop = 0; loop < dataLength; loop++) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
693 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
694 if((bottlePressureStart == 0) && (tankdata[loop] != 0)) /* find first pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
695 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
696 bottlePressureStart = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
697 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
698 if((tankdata[loop] != 0)) /* store last pressure value */ |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
699 { |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
700 bottlePressureEnd = tankdata[loop]; |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
701 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
702 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
703 if(bottlePressureStart != 0) |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
704 { |
| 484 | 705 snprintf(text,40,"\002%i | %i\016\016 Bar\017",bottlePressureStart,bottlePressureEnd); |
| 706 Gfx_write_label_var(hgfx,450,wintemp.right,440, &FontT42,CLUT_GasSensor1,text); | |
|
454
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
707 } |
|
5a633dece17a
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
186
diff
changeset
|
708 #endif |
| 38 | 709 //--- print coordinate system & depth graph with gaschanges --- |
| 710 wintemp.left = 330; | |
| 711 wintemp.top = 160; | |
| 712 wintemp.bottom -= 40; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
713 |
| 38 | 714 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); |
| 715 } | |
| 716 | |
| 717 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
718 static void show_logbook_logbook_show_log_page2(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 719 { |
| 720 //*** Page2: Depth and Temperature **** | |
| 721 | |
| 722 SWindowGimpStyle wintemp; | |
| 723 SWindowGimpStyle winsmal; | |
| 724 wintemp.left = 50; | |
| 725 wintemp.right = 799 - wintemp.left; | |
| 726 wintemp.top = 50; | |
| 727 wintemp.bottom = 479 - 40; | |
| 728 | |
| 729 SLogbookHeader logbookHeader; | |
| 730 | |
| 731 logbook_getHeader(StepBackwards,&logbookHeader); | |
| 732 uint16_t dataLength = 0; | |
| 733 uint16_t depthdata[1000]; | |
| 734 uint8_t gasdata[1000]; | |
| 735 int16_t tempdata[1000]; | |
| 736 uint16_t decoDepthdata[1000]; | |
| 737 uint16_t *pDecoDepthData = 0; | |
| 738 | |
| 610 | 739 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, tempdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, decoDepthdata, NULL, NULL); |
| 38 | 740 |
| 741 for(int i = 0; i<dataLength; i++) | |
| 742 { | |
| 743 if(decoDepthdata[i] >= 300) | |
| 744 { | |
| 745 pDecoDepthData = decoDepthdata; | |
| 746 break; | |
| 747 } | |
| 748 } | |
| 749 //--- print coordinate system & depth graph --- | |
| 750 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, pDecoDepthData); | |
| 751 | |
| 752 //*** Temperature ************************************************* | |
| 753 | |
| 754 //--- print temperature labels --- | |
| 755 // input maxtmpline, tmpstep, deltaline | |
| 756 | |
| 757 winsmal.left = wintemp.right +6; | |
| 758 winsmal.top = wintemp.top - 3; | |
| 759 winsmal.right = wintemp.right + 30; | |
| 760 winsmal.bottom = winsmal.top + 16; | |
| 761 | |
| 567 | 762 if(settingsGetPointer()->nonMetricalSystem) |
| 763 { | |
| 764 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[F]"); | |
| 765 } | |
| 766 else | |
| 767 { | |
| 768 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,"[C]"); | |
| 769 } | |
| 38 | 770 |
| 771 int16_t minVal = 0; | |
| 772 int16_t maxVal = 0; | |
| 773 int newTop = 0; | |
| 774 int newBottom = 0; | |
| 775 uint16_t step = 0; | |
| 776 int16_t maxValTop = 0; | |
| 777 | |
| 778 scaleHelper(dataLength, tempdata, wintemp.top, wintemp.bottom, | |
| 779 &minVal, &maxVal, &newTop, &newBottom, | |
| 780 &step, &maxValTop); // newTop is wintemp.top | |
| 781 | |
| 782 scaleAdapt( wintemp.top, wintemp.bottom, | |
| 783 &minVal, &maxVal, &newTop, &newBottom, | |
| 784 &step, &maxValTop); | |
| 785 | |
| 786 // temperature in 1/10 �C | |
| 787 int deltaline = (1 + wintemp.bottom - wintemp.top)/5; | |
| 632 | 788 char msg[15]; |
| 38 | 789 int tmp = maxValTop; |
| 567 | 790 int converted; |
| 38 | 791 for(int i = 1; i<=5; i++) |
| 792 { | |
| 793 tmp -= step; | |
| 567 | 794 if(settingsGetPointer()->nonMetricalSystem) { |
| 795 converted = unit_temperature_integer(tmp); | |
| 796 } | |
| 797 else{ | |
| 798 converted = tmp; | |
| 799 } | |
| 38 | 800 //if(tmp < 0) |
| 801 //break; | |
| 802 winsmal.top = wintemp.top + deltaline * i - 14; | |
| 803 winsmal.bottom = winsmal.top + 16; | |
| 567 | 804 if((converted >= 0) && (converted < 100)) |
| 632 | 805 snprintf(msg,15,"%1i",converted); |
| 38 | 806 else |
| 632 | 807 snprintf(msg,15,"%2i",converted); |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
808 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,CLUT_LogbookTemperature,msg); |
| 38 | 809 } |
| 810 | |
| 811 | |
| 812 //--- print temperature graph --- | |
| 813 // input tempdata[i], maxtmpline, mintmpline, maxTmp, minTmp, deltaline, wintemp.top, dataLength, datamax, | |
| 814 | |
| 815 //adapt window | |
| 816 wintemp.bottom = newBottom; | |
| 817 wintemp.top = newTop; | |
| 818 GFX_graph_print(hgfx,&wintemp,0,1,maxVal,minVal, (uint16_t *)tempdata,dataLength,CLUT_LogbookTemperature, NULL); | |
| 819 } | |
| 820 | |
| 821 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
822 static void build_logbook_test(uint8_t page, uint8_t StepBackwards) |
| 38 | 823 { |
| 824 uint32_t lastScreen,lastBackground; | |
| 825 | |
| 826 lastScreen = tLOGscreen.FBStartAdress; | |
| 827 lastBackground = tLOGbackground.FBStartAdress; | |
| 828 | |
| 829 tLOGscreen.FBStartAdress = getFrame(16); | |
| 830 tLOGscreen.ImageHeight = 480; | |
| 831 tLOGscreen.ImageWidth = 800; | |
| 832 tLOGscreen.LayerIndex = 1; | |
| 833 | |
| 834 tLOGbackground.FBStartAdress = getFrame(17); | |
| 835 tLOGbackground.ImageHeight = 480; | |
| 836 tLOGbackground.ImageWidth = 800; | |
| 837 tLOGbackground.LayerIndex = 0; | |
| 838 switch(page) | |
| 839 { | |
| 840 case 1: | |
| 841 show_logbook_logbook_show_log_page1(&tLOGscreen,StepBackwards); | |
| 842 break; | |
| 843 case 2: | |
| 844 show_logbook_logbook_show_log_page2(&tLOGscreen,StepBackwards); | |
| 845 break; | |
| 846 case 3: | |
| 847 show_logbook_logbook_show_log_page3(&tLOGscreen,StepBackwards); | |
| 848 break; | |
| 849 case 4: | |
| 850 show_logbook_logbook_show_log_page4(&tLOGscreen,StepBackwards); | |
| 851 break; | |
| 852 } | |
| 853 | |
| 854 releaseFrame(16,lastScreen); | |
| 855 releaseFrame(17,lastBackground); | |
| 856 } | |
| 857 | |
| 858 | |
| 859 void show_logbook_test(_Bool firstPage, uint8_t StepBackwards) | |
| 860 { | |
| 861 if(firstPage) | |
| 862 { | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
863 active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
864 active_log_offset = StepBackwards; |
| 38 | 865 } |
| 866 else | |
| 867 { | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
868 active_log_page++; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
869 if(active_log_page > 4) |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
870 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
871 active_log_page = 1; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
872 } |
| 38 | 873 } |
| 874 | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
875 build_logbook_test(active_log_page,StepBackwards); |
| 38 | 876 // GFX_ResetLayer(TOP_LAYER); |
| 877 // GFX_ResetLayer(BACKGRD_LAYER); | |
| 878 | |
| 879 set_globalState(StILOGSHOW); | |
| 880 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); | |
| 881 } | |
| 882 | |
| 883 | |
| 884 void show_logbook_exit(void) | |
| 885 { | |
| 886 releaseFrame(16,tLOGscreen.FBStartAdress); | |
| 887 releaseFrame(17,tLOGbackground.FBStartAdress); | |
| 888 } | |
| 889 | |
| 890 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
891 static void show_logbook_logbook_show_log_page3(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 892 { |
| 893 SWindowGimpStyle wintemp; | |
| 894 SWindowGimpStyle winsmal; | |
| 895 wintemp.left = 50; | |
| 896 wintemp.right = 799 - wintemp.left; | |
| 897 wintemp.top = 50; | |
| 898 wintemp.bottom = 479 - 40; | |
| 899 | |
| 900 SLogbookHeader logbookHeader; | |
| 901 | |
| 902 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 903 uint16_t dataLength = 0; | |
| 904 uint16_t depthdata[1000]; | |
| 905 uint8_t gasdata[1000]; | |
| 610 | 906 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 907 |
| 908 //--- print coordinate system & depth graph with gaschanges --- | |
| 909 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 1, dataLength, depthdata, gasdata, NULL); | |
| 910 | |
| 911 //--- print gas list --- | |
| 912 winsmal.left = wintemp.right - 190; | |
| 913 winsmal.right = winsmal.left + 150; | |
| 914 | |
| 915 char msg[15]; | |
| 916 char gas_name[15]; | |
| 917 int j = 0; | |
| 918 for(int i = 4;i >= 0;i--) | |
| 919 { | |
| 920 if(logbookHeader.gasordil[i].note.ub.active > 0) | |
| 921 { | |
| 922 j++; | |
| 923 winsmal.top = wintemp.bottom - 5 - j * 26 ; | |
| 924 winsmal.bottom = winsmal.top + 21 ; | |
| 925 uint8_t color = get_colour(i); | |
| 926 | |
| 927 print_gas_name(gas_name,15,logbookHeader.gasordil[i].oxygen_percentage,logbookHeader.gasordil[i].helium_percentage); | |
| 928 snprintf(msg,15,"G%i: %s",i + 1, gas_name); | |
| 929 //msg[10] = 0; | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
930 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 931 } |
| 932 } | |
| 933 | |
| 934 //--- define buttons --- | |
| 935 /*if(*ghost_char_logfile_oxydata) | |
| 936 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page4, surf1_menu_logbook_show_log_next); | |
| 937 else | |
| 938 button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 939 */ | |
| 940 } | |
| 941 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
942 static void show_logbook_logbook_show_log_page4(GFX_DrawCfgScreen *hgfx, uint8_t StepBackwards) |
| 38 | 943 { SWindowGimpStyle wintemp; |
| 944 SWindowGimpStyle winsmal; | |
| 945 wintemp.left = 50; | |
| 946 wintemp.right = 799 - wintemp.left; | |
| 947 wintemp.top = 50; | |
| 948 wintemp.bottom = 479 - 40; | |
| 949 uint8_t color = 0; | |
| 950 SLogbookHeader logbookHeader; | |
| 951 | |
| 952 logbook_getHeader(StepBackwards, &logbookHeader); | |
| 953 uint16_t dataLength = 0; | |
| 954 uint16_t depthdata[1000]; | |
| 955 uint8_t gasdata[1000]; | |
| 956 uint16_t ppO2data[1000]; | |
| 957 uint16_t sensor2[1000]; | |
| 958 uint16_t sensor3[1000]; | |
| 959 uint16_t *setpoint = ppO2data; | |
| 960 uint16_t *sensor1 = ppO2data; | |
| 961 | |
| 962 | |
| 963 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
| 610 | 964 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata,gasdata, NULL, ppO2data, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 965 else |
| 966 { | |
| 967 if(logbookHeader.CCRmode == CCRMODE_FixedSetpoint) | |
| 610 | 968 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, setpoint, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL); |
| 38 | 969 else |
| 610 | 970 dataLength = logbook_readSampleData(StepBackwards, 1000, depthdata, gasdata, NULL, NULL, NULL, sensor1, sensor2, sensor3, NULL, NULL, NULL, NULL, NULL); |
| 38 | 971 } |
| 972 | |
| 973 | |
| 974 //--- print coordinate system & depth graph with bailout--- | |
| 975 show_logbook_draw_depth_graph(hgfx, StepBackwards, &wintemp, 0, dataLength, depthdata, gasdata, NULL); | |
| 976 | |
| 977 | |
| 978 | |
| 979 //*** Desciption at bottom of page *************************** | |
| 980 winsmal.top = wintemp.bottom +2 ; | |
| 981 winsmal.bottom = winsmal.top + 16; | |
| 982 | |
| 983 | |
| 984 /*if(strcmp( (char*)ghost_char_logfile_text_oc_ccr,"ccr/bailout") == 0) | |
| 985 { | |
| 986 winsmal.left = wintemp.left + 2; | |
| 987 winsmal.right = winsmal.left + 55; | |
| 988 | |
| 989 oled_write(OVERLAY, &winsmal,"CCR -",false,true); | |
| 990 | |
| 991 winsmal.left = winsmal.right; | |
| 992 winsmal.right = winsmal.left + 90; | |
| 993 //winsmal.fontcolor = oled_get_colour(15); | |
| 994 oled_write(OVERLAY, &winsmal,"bailout",false,true); | |
| 995 } | |
| 996 else*/ | |
| 997 { | |
| 998 winsmal.left = wintemp.left + 2; | |
| 999 winsmal.right = winsmal.left + 55; | |
| 1000 color = CLUT_GasSensor1;//LOGBOOK_GRAPH_DEPTH; | |
| 1001 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1002 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"depth"); |
| 38 | 1003 |
| 1004 } | |
| 1005 winsmal.left = 799 - 67;//wintemp.right -67; | |
| 1006 winsmal.right = winsmal.left;// + 45; | |
| 1007 | |
| 1008 color = CLUT_LogbookTemperature;//LOGBOOK_GRAPH_DEPTH; | |
| 1009 if(logbookHeader.diveMode != DIVEMODE_CCR) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1010 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002PP O2"); |
| 38 | 1011 else |
| 1012 if(logbookHeader.CCRmode != CCRMODE_Sensors) | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1013 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SETPOINT"); |
| 38 | 1014 else |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1015 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"\002SENSORS"); |
| 38 | 1016 |
| 1017 //*** PP O2 **************************************************** | |
| 1018 //calc lines and labels | |
| 1019 int datamax = 0; | |
| 1020 int datamin = 10000; | |
| 1021 for(int i=1;i<dataLength;i++) | |
| 1022 { | |
| 1023 if(ppO2data[i]>datamax) | |
| 1024 datamax = ppO2data[i]; | |
| 1025 if(ppO2data[i]<datamin) | |
| 1026 datamin = ppO2data[i]; | |
| 1027 } | |
| 1028 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 1029 { | |
| 1030 for(int i=1;i<dataLength;i++) | |
| 1031 { | |
| 1032 if(sensor2[i]>datamax) | |
| 1033 datamax = sensor2[i]; | |
| 1034 if(sensor2[i]<datamin) | |
| 1035 datamin = sensor2[i]; | |
| 1036 if(sensor3[i]>datamax) | |
| 1037 datamax = sensor3[i]; | |
| 1038 if(sensor3[i]<datamin) | |
| 1039 datamin = sensor3[i]; | |
| 1040 } | |
| 1041 } | |
| 1042 float maxoxy = ((float)datamax)/100; | |
| 1043 float minoxy = ((float)datamin)/100; | |
| 1044 float oxystep = 0.5; | |
| 1045 float maxoxyline = 2.5; | |
| 1046 | |
| 1047 //--- print PP O2 labels ---- | |
| 1048 winsmal.left = wintemp.right + 2; | |
| 1049 winsmal.top = wintemp.top ; | |
| 1050 winsmal.right = wintemp.right + 30; | |
| 1051 winsmal.bottom = winsmal.top + 16; | |
| 1052 //winsmal.font = ft_tiny + ft_SLIM; | |
| 1053 color = CLUT_LogbookTemperature;// = LOGBOOK_GRAPH_TEMP; | |
| 1054 | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1055 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,"bar"); |
| 38 | 1056 |
| 1057 int deltaline = (wintemp.bottom - wintemp.top)/5; | |
| 1058 char msg[4]; | |
| 1059 float oxy = maxoxyline; | |
| 1060 for(int i = 1; i<=5; i++) | |
| 1061 { | |
| 1062 oxy -= oxystep; | |
| 1063 if(oxy < 0) | |
| 1064 break; | |
| 1065 winsmal.top = wintemp.top + deltaline * i - 8; | |
| 1066 winsmal.bottom = winsmal.top + 16; | |
| 1067 snprintf(msg,4,"%1.1f",oxy); | |
|
110
cc8e24374b83
Added option to handled mirrored display to existing functions
Ideenmodellierer
parents:
38
diff
changeset
|
1068 Gfx_write_label_var(hgfx, winsmal.left, winsmal.right,winsmal.top, &FontT24,color,msg); |
| 38 | 1069 //oled_write(OVERLAY, &winsmal,msg,false,true); |
| 1070 } | |
| 1071 | |
| 1072 //--- print PP O2 graph --- | |
| 1073 //Adapt window | |
| 1074 float ftmp = ((maxoxyline - minoxy) * deltaline) /oxystep + wintemp.top; | |
| 1075 wintemp.bottom = ftmp; | |
| 1076 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1077 wintemp.bottom++; | |
| 1078 | |
| 1079 ftmp = wintemp.top + ((maxoxyline - maxoxy) * deltaline) /oxystep; | |
| 1080 wintemp.top = ftmp; | |
| 1081 if((ftmp - (int)ftmp) >= 0.5f) | |
| 1082 wintemp.top++; | |
| 1083 wintemp.top = MaxU32LOG(wintemp.top ,0); | |
| 1084 if(wintemp.top < wintemp.bottom) | |
| 1085 { | |
| 1086 if((logbookHeader.diveMode == DIVEMODE_CCR) && (logbookHeader.CCRmode == CCRMODE_Sensors)) | |
| 1087 { | |
| 1088 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1089 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor2,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1090 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, sensor3,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1091 } | |
| 1092 else | |
| 1093 GFX_graph_print(hgfx,&wintemp,0,1,datamax,datamin, ppO2data,dataLength,CLUT_LogbookTemperature, NULL); | |
| 1094 } | |
| 1095 else | |
| 1096 { | |
| 1097 point_t startPoint, stopPoint; | |
| 1098 startPoint.x = wintemp.left; | |
| 1099 stopPoint.x = wintemp.right; | |
| 1100 stopPoint.y = startPoint.y = 479 - wintemp.top; | |
| 1101 GFX_draw_colorline(hgfx, startPoint, stopPoint, CLUT_LogbookTemperature); | |
| 1102 } | |
| 1103 | |
| 1104 //--- define buttons --- | |
| 1105 //button_start_single_action(surf1_menu_logbook_current_page, surf1_menu_logbook_show_log_page1, surf1_menu_logbook_show_log_next); | |
| 1106 } | |
| 1107 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1108 static void print_gas_name(char* output,uint8_t length,uint8_t oxygen,uint8_t helium) |
| 38 | 1109 { |
| 1110 if(helium == 0) | |
| 1111 { | |
| 1112 if(oxygen == 21) | |
| 1113 snprintf(output, length, "Air"); | |
| 1114 else if(oxygen == 100) | |
| 1115 snprintf(output, length, "Oxy"); | |
| 1116 else | |
| 1117 snprintf(output, length, "NX%i",oxygen); | |
| 1118 } | |
| 1119 else | |
| 1120 { | |
| 1121 if((oxygen + helium) == 100) | |
| 1122 snprintf(output, length, "HX%i",oxygen); | |
| 1123 else | |
| 1124 snprintf(output, length, "TMX%i/%i", oxygen, helium); | |
| 1125 } | |
| 1126 | |
| 1127 } | |
| 1128 | |
|
186
f11f0bf6ef2d
cleanup: remove obsolete code, make static, etc.
Jan Mulder <jlmulder@xs4all.nl>
parents:
166
diff
changeset
|
1129 static int16_t get_colour(int16_t color) |
| 38 | 1130 { |
| 1131 return CLUT_GasSensor1 + color; | |
| 1132 } | |
|
596
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1133 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1134 uint8_t getActiveLogPage() |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1135 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1136 return active_log_page; |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1137 } |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1138 |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1139 void updateReplayIncdicator(GFX_DrawCfgScreen *hgfx) |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1140 { |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1141 build_logbook_test(1,active_log_offset); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1142 GFX_SetFramesTopBottom(tLOGscreen.FBStartAdress, tLOGbackground.FBStartAdress,480); |
|
16e369eae6e5
Added functionality to select a dive to be shown in the T3 profile view:
Ideenmodellierer
parents:
583
diff
changeset
|
1143 } |