Mercurial > public > ostc4
annotate Discovery/Src/externLogbookFlash.c @ 437:6c824f902934
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
Improve BatteryGasGauge
| author | heinrichsweikamp <bitbucket@heinrichsweikamp.com> |
|---|---|
| date | Mon, 24 Feb 2020 07:58:37 +0000 |
| parents | 7f351c25608a |
| children | 9a9e4908ce2e b90ddf57f7f1 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file externLogbookFlash.c | |
| 5 * @author heinrichs weikamp gmbh | |
| 6 * @date 07-Aug-2014 | |
| 7 * @version V0.0.4 | |
| 8 * @since 29-Sept-2015 | |
| 9 * @brief Main File to access the new 1.8 Volt Spansion S25FS256S 256 Mbit (32 Mbyte) | |
| 10 * @bug | |
| 11 * @warning | |
| 12 * | |
| 13 @verbatim | |
| 14 ============================================================================== | |
| 15 ##### Logbook Header (TOC) ##### | |
| 16 ============================================================================== | |
| 17 [..] Memory useage: | |
| 18 NEW: Spansion S25FS-S256S | |
| 19 | |
| 20 only 8x 4KB and 1x 32KB, remaining is 64KB or 256KB | |
| 21 Sector Size (kbyte) Sector Count Sector Range Address Range (Byte Address) Notes | |
| 22 4 8 SA00 00000000h-00000FFFh | |
| 23 : : | |
| 24 SA07 00007000h-00007FFFh | |
| 25 | |
| 26 32 1 SA08 00008000h-0000FFFFh | |
| 27 | |
| 28 64 511 SA09 00010000h-0001FFFFh | |
| 29 : : | |
| 30 SA519 01FF0000h-01FFFFFFh | |
| 31 OLD: | |
| 32 1kB each header | |
| 33 with predive header at beginning | |
| 34 and postdive header with 0x400 HEADER2OFFSET | |
| 35 4kB (one erase) has two dives with 4 headers total | |
| 36 total of 512 kB (with 256 header ids (8 bit)) | |
| 37 Size is 280 Byte (as of 25.Nov. 2014) | |
| 38 | |
| 39 [..] Output to PC / UART is postdive header | |
| 40 | |
| 41 [..] Block Protection Lock-Down is to erase logbook only | |
| 42 | |
| 43 [..] Timing (see page 137 of LOGBOOK_V3_S25FS-S_00-271247.pdf | |
| 44 bulk erase is 2 minutes typ., 6 minutes max. | |
| 45 | |
| 46 ============================================================================== | |
| 47 ##### DEMOMODE ##### | |
| 48 ============================================================================== | |
| 49 151215: ext_flash_write_settings() is DISABLED! | |
| 50 | |
| 51 ============================================================================== | |
| 52 ##### bug fixes ##### | |
| 53 ============================================================================== | |
| 54 150917: end in header and length of sample was one byte too long | |
| 55 as stated by Jef Driesen email 15.09.2015 | |
| 56 | |
| 57 @endverbatim | |
| 58 ****************************************************************************** | |
| 59 * @attention | |
| 60 * | |
| 61 * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> | |
| 62 * | |
| 63 ****************************************************************************** | |
| 64 */ | |
| 65 | |
| 66 /* Includes ------------------------------------------------------------------*/ | |
| 67 #include "stm32f4xx_hal.h" | |
| 68 #include "externLogbookFlash.h" | |
| 69 #include "ostc.h" | |
| 70 #include "settings.h" | |
| 71 #include "gfx_engine.h" | |
| 72 | |
| 73 #ifndef BOOTLOADER_STANDALONE | |
| 74 #include "logbook.h" | |
| 75 #endif | |
| 76 | |
| 77 /* Private types -------------------------------------------------------------*/ | |
| 78 #define FLASHSTART 0x000000 | |
| 79 //#define FLASHSTOP 0x01FFFFFF all 32 MB with 4byte addressing | |
| 80 #define FLASHSTOP 0x00FFFFFF | |
| 81 //#define FLASHSTOP 0x3FFFFF | |
| 82 #define RELEASE 1 | |
| 83 #define HOLDCS 0 | |
| 84 | |
| 85 #define HEADER2OFFSET 0x400 | |
| 86 | |
| 87 typedef enum{ | |
| 88 EF_HEADER, | |
| 89 EF_SAMPLE, | |
| 90 EF_DEVICEDATA, | |
| 91 EF_VPMDATA, | |
| 92 EF_SETTINGS, | |
| 93 EF_FIRMWARE, | |
| 94 EF_FIRMWARE2, | |
| 95 }which_ring_enum; | |
| 96 | |
| 97 | |
| 98 typedef struct{ | |
| 99 uint8_t IsBusy:1; | |
| 100 uint8_t IsWriteEnabled:1; | |
| 101 uint8_t BlockProtect0:1; | |
| 102 uint8_t BlockProtect1:1; | |
| 103 uint8_t BlockProtect2:1; | |
| 104 uint8_t BlockProtect3:1; | |
| 105 uint8_t IsAutoAddressIncMode:1; | |
| 106 uint8_t BlockProtectL:1; | |
| 107 } extFlashStatusUbit8_t; | |
| 108 | |
| 109 typedef union{ | |
| 110 extFlashStatusUbit8_t ub; | |
| 111 uint8_t uw; | |
| 112 } extFlashStatusBit8_Type; | |
| 113 | |
| 114 | |
| 115 /* Exported variables --------------------------------------------------------*/ | |
| 116 | |
| 117 /* Private variables ---------------------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
118 static uint32_t actualAddress = 0; |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
119 static uint32_t preparedPageAddress = 0; |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
120 static uint32_t closeSectorAddress = 0; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
121 static uint32_t entryPoint = 0; |
| 38 | 122 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
123 static uint32_t actualPointerHeader = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
124 static uint32_t actualPointerSample = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
125 static uint32_t LengthLeftSampleRead = 0; |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
126 static uint32_t actualPointerDevicedata = DDSTART; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
127 static uint32_t actualPointerDevicedata_Read = DDSTART; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
128 static uint32_t actualPointerVPM = 0; |
| 427 | 129 static uint32_t actualPointerSettings = SETTINGSSTART; |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
130 static uint32_t actualPointerFirmware = 0; |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
131 static uint32_t actualPointerFirmware2 = 0; |
| 38 | 132 |
| 133 /* Private function prototypes -----------------------------------------------*/ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
134 static void chip_unselect(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
135 static void chip_select(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
136 static void error_led_on(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
137 static void error_led_off(void); |
| 38 | 138 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
139 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
140 static uint8_t read_spi(uint8_t unselect_CS_afterwards); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
141 static void write_address(uint8_t unselect_CS_afterwards); |
| 38 | 142 static void Error_Handler_extflash(void); |
| 143 static void wait_chip_not_busy(void); | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
144 static void ext_flash_incf_address(uint8_t type); |
| 38 | 145 //void ext_flash_incf_address_ring(void); |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
146 static void ext_flash_decf_address_ring(uint8_t type); |
| 38 | 147 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
148 static void ext_flash_erase4kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
149 static void ext_flash_erase32kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
150 static void ext_flash_erase64kB(void); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
151 static uint8_t ext_flash_erase_if_on_page_start(void); |
| 38 | 152 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
153 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase); |
| 38 | 154 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
155 static void ext_flash_read_block(uint8_t *getByte, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
156 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
157 static void ext_flash_read_block_stop(void); |
| 38 | 158 |
| 159 static void ef_hw_rough_delay_us(uint32_t delayUs); | |
| 160 static void ef_erase_64K(uint32_t blocks); | |
| 161 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
162 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
163 |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
164 static void ext_flash_disable_protection(void); |
| 38 | 165 |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
166 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
167 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type); |
|
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
168 static void ext_flash_find_start(void); |
| 38 | 169 |
| 170 | |
| 171 /* Exported functions --------------------------------------------------------*/ | |
| 172 | |
| 173 void ext_flash_write_firmware(uint8_t *pSample1, uint32_t length1)//, uint8_t *pSample2, uint32_t length2) | |
| 174 { | |
| 175 general32to8_Type lengthTransform; | |
| 176 | |
| 177 lengthTransform.u32 = length1; | |
| 178 | |
| 179 actualPointerFirmware = FWSTART; | |
| 180 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE, 1); | |
| 181 ef_write_block(pSample1,length1, EF_FIRMWARE, 1); | |
| 182 | |
| 183 // if(length2) | |
| 184 // ef_write_block(pSample2,length2, EF_FIRMWARE, 1); | |
| 185 } | |
| 186 | |
| 187 uint8_t ext_flash_read_firmware_version(char *text) | |
| 188 { | |
| 189 uint32_t backup = actualAddress; | |
| 190 uint8_t buffer[4]; | |
| 191 | |
| 192 // + 4 for length data, see ext_flash_write_firmware | |
| 193 actualAddress = FWSTART + 4 + 0x10000; | |
| 194 ext_flash_read_block_start(); | |
| 195 ext_flash_read_block(&buffer[0], EF_FIRMWARE); | |
| 196 ext_flash_read_block(&buffer[1], EF_FIRMWARE); | |
| 197 ext_flash_read_block(&buffer[2], EF_FIRMWARE); | |
| 198 ext_flash_read_block(&buffer[3], EF_FIRMWARE); | |
| 199 | |
| 200 ext_flash_read_block_stop(); | |
| 201 actualAddress = backup; | |
| 202 | |
| 203 uint8_t ptr = 0; | |
| 204 text[ptr++] = 'V'; | |
| 205 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[0] & 0x3F); | |
| 206 text[ptr++] = '.'; | |
| 207 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[1] & 0x3F); | |
| 208 text[ptr++] = '.'; | |
| 209 ptr += gfx_number_to_string(2,0,&text[ptr],buffer[2] & 0x3F); | |
| 210 text[ptr++] = ' '; | |
| 211 if(buffer[3]) | |
| 212 { | |
| 213 text[ptr++] = 'b'; | |
| 214 text[ptr++] = 'e'; | |
| 215 text[ptr++] = 't'; | |
| 216 text[ptr++] = 'a'; | |
| 217 text[ptr++] = ' '; | |
| 218 } | |
| 219 return ptr; | |
| 220 } | |
| 221 | |
| 222 | |
| 223 uint32_t ext_flash_read_firmware(uint8_t *pSample1, uint32_t max_length, uint8_t *magicByte) | |
| 224 { | |
| 225 uint32_t backup = actualAddress; | |
| 226 general32to8_Type lengthTransform; | |
| 227 | |
| 228 actualAddress = FWSTART; | |
| 229 ext_flash_read_block_start(); | |
| 230 | |
| 231 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE); | |
| 232 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE); | |
| 233 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE); | |
| 234 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE); | |
| 235 | |
| 236 | |
| 237 if(lengthTransform.u32 == 0xFFFFFFFF) | |
| 238 { | |
| 239 lengthTransform.u32 = 0xFFFFFFFF; | |
| 240 } | |
| 241 else | |
| 242 if(lengthTransform.u32 > max_length) | |
| 243 { | |
| 244 lengthTransform.u32 = 0xFF000000; | |
| 245 } | |
| 246 else | |
| 247 { | |
| 248 for(uint32_t i = 0; i<lengthTransform.u32; i++) | |
| 249 { | |
| 250 ext_flash_read_block(&pSample1[i], EF_FIRMWARE); | |
| 251 } | |
| 252 | |
| 253 } | |
| 254 | |
| 255 ext_flash_read_block_stop(); | |
| 256 | |
| 257 if(magicByte) | |
| 258 { | |
| 259 *magicByte = pSample1[0x10000 + 0x3E]; // 0x3E == 62 | |
| 260 } | |
| 261 | |
| 262 actualAddress = backup; | |
| 263 return lengthTransform.u32; | |
| 264 } | |
| 265 | |
| 266 | |
| 267 void ext_flash_write_firmware2(uint32_t offset, uint8_t *pSample1, uint32_t length1, uint8_t *pSample2, uint32_t length2) | |
| 268 { | |
| 269 general32to8_Type lengthTransform, offsetTransform; | |
| 270 | |
| 271 lengthTransform.u32 = length1 + length2; | |
| 272 offsetTransform.u32 = offset; | |
| 273 | |
| 274 actualPointerFirmware2 = FWSTART2; | |
| 275 ef_write_block(lengthTransform.u8,4, EF_FIRMWARE2, 1); | |
| 276 ef_write_block(offsetTransform.u8,4, EF_FIRMWARE2, 1); | |
| 277 ef_write_block(pSample1,length1, EF_FIRMWARE2, 1); | |
| 278 if(length2) | |
| 279 ef_write_block(pSample2,length2, EF_FIRMWARE2, 1); | |
| 280 } | |
| 281 | |
| 282 | |
| 283 uint32_t ext_flash_read_firmware2(uint32_t *offset, uint8_t *pSample1, uint32_t max_length1, uint8_t *pSample2, uint32_t max_length2) | |
| 284 { | |
| 285 uint32_t backup = actualAddress; | |
| 286 uint32_t length1, length2; | |
| 287 general32to8_Type lengthTransform, offsetTransform; | |
| 288 | |
| 289 actualAddress = FWSTART2; | |
| 290 ext_flash_read_block_start(); | |
| 291 | |
| 292 ext_flash_read_block(&lengthTransform.u8[0], EF_FIRMWARE2); | |
| 293 ext_flash_read_block(&lengthTransform.u8[1], EF_FIRMWARE2); | |
| 294 ext_flash_read_block(&lengthTransform.u8[2], EF_FIRMWARE2); | |
| 295 ext_flash_read_block(&lengthTransform.u8[3], EF_FIRMWARE2); | |
| 296 | |
| 297 ext_flash_read_block(&offsetTransform.u8[0], EF_FIRMWARE2); | |
| 298 ext_flash_read_block(&offsetTransform.u8[1], EF_FIRMWARE2); | |
| 299 ext_flash_read_block(&offsetTransform.u8[2], EF_FIRMWARE2); | |
| 300 ext_flash_read_block(&offsetTransform.u8[3], EF_FIRMWARE2); | |
| 301 | |
| 302 *offset = offsetTransform.u32; | |
| 303 | |
| 304 if(lengthTransform.u32 == 0xFFFFFFFF) | |
| 305 { | |
| 306 lengthTransform.u32 = 0xFFFFFFFF; | |
| 307 } | |
| 308 else | |
| 309 if(lengthTransform.u32 > max_length1 + max_length2) | |
| 310 { | |
| 311 lengthTransform.u32 = 0xFF000000; | |
| 312 } | |
| 313 else | |
| 314 { | |
| 315 if(lengthTransform.u32 < max_length1) | |
| 316 { | |
| 317 length1 = lengthTransform.u32; | |
| 318 length2 = 0; | |
| 319 } | |
| 320 else | |
| 321 { | |
| 322 length1 = max_length1; | |
| 323 length2 = lengthTransform.u32 - max_length1; | |
| 324 } | |
| 325 | |
| 326 if(pSample1) | |
| 327 { | |
| 328 for(uint32_t i = 0; i<length1; i++) | |
| 329 { | |
| 330 ext_flash_read_block(&pSample1[i], EF_FIRMWARE2); | |
| 331 } | |
| 332 if(pSample2) | |
| 333 { | |
| 334 for(uint32_t i = 0; i<length2; i++) | |
| 335 { | |
| 336 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
| 337 } | |
| 338 } | |
| 339 } | |
| 340 else if(pSample2) | |
| 341 { | |
| 342 actualAddress += length1; | |
| 343 for(uint32_t i = 0; i<length2; i++) | |
| 344 { | |
| 345 ext_flash_read_block(&pSample2[i], EF_FIRMWARE2); | |
| 346 } | |
| 347 } | |
| 348 } | |
| 349 ext_flash_read_block_stop(); | |
| 350 actualAddress = backup; | |
| 351 return lengthTransform.u32; | |
| 352 } | |
| 353 | |
| 354 | |
| 355 void ext_flash_read_fixed_16_devicedata_blocks_formated_128byte_total(uint8_t *buffer) | |
| 356 { | |
| 357 SDeviceLine data[16]; | |
| 358 uint8_t tempLengthIngnore; | |
| 359 uint16_t count; | |
| 360 uint8_t transfer; | |
| 361 | |
| 362 RTC_DateTypeDef Sdate; | |
| 363 RTC_TimeTypeDef Stime; | |
| 364 | |
| 365 actualAddress = DDSTART; | |
| 366 | |
| 367 ext_flash_read_block_start(); | |
| 368 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
| 369 ext_flash_read_block(&tempLengthIngnore, EF_DEVICEDATA); | |
| 370 | |
| 371 ext_flash_read_block_multi((uint8_t *)data,16*3*4, EF_DEVICEDATA); | |
| 372 ext_flash_read_block_stop(); | |
| 373 | |
| 374 count = 0; | |
| 375 for(int i=0;i<16;i++) | |
| 376 { | |
| 377 transfer = (data[i].value_int32 >> 24) & 0xFF; | |
| 378 buffer[count++] = transfer; | |
| 379 transfer = (data[i].value_int32 >> 16) & 0xFF; | |
| 380 buffer[count++] = transfer; | |
| 381 transfer = (data[i].value_int32 >> 8) & 0xFF; | |
| 382 buffer[count++] = transfer; | |
| 383 transfer = (data[i].value_int32) & 0xFF; | |
| 384 buffer[count++] = transfer; | |
| 385 | |
| 386 translateDate(data[i].date_rtc_dr, &Sdate); | |
| 387 translateTime(data[i].time_rtc_tr, &Stime); | |
| 388 buffer[count++] = Sdate.Year; | |
| 389 buffer[count++] = Sdate.Month; | |
| 390 buffer[count++] = Sdate.Date; | |
| 391 buffer[count++] = Stime.Hours; | |
| 392 } | |
| 393 } | |
| 394 | |
| 395 | |
| 396 #ifndef BOOTLOADER_STANDALONE | |
| 397 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
398 void ext_flash_write_devicedata(uint8_t resetRing) |
| 38 | 399 { |
| 400 uint8_t *pData; | |
| 401 const uint16_t length = sizeof(SDevice); | |
| 402 uint8_t length_lo, length_hi; | |
| 403 uint8_t dataLength[2] = { 0 }; | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
404 uint32_t tmpBlockStart; |
| 38 | 405 |
| 406 ext_flash_disable_protection(); | |
| 407 | |
| 408 pData = (uint8_t *)stateDeviceGetPointer(); | |
| 409 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
410 /* Reset the Ring to the start address if requested (e.g. because we write the default block during shutdown) */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
411 if((resetRing) || ((actualPointerDevicedata + length) >= DDSTOP)) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
412 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
413 actualPointerDevicedata = DDSTART; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
414 } |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
415 tmpBlockStart = actualPointerDevicedata; |
| 38 | 416 |
| 417 length_lo = (uint8_t)(length & 0xFF); | |
| 418 length_hi = (uint8_t)(length >> 8); | |
| 419 dataLength[0] = length_lo; | |
| 420 dataLength[1] = length_hi; | |
| 421 | |
| 422 ef_write_block(dataLength,2, EF_DEVICEDATA, 0); | |
| 423 ef_write_block(pData,length, EF_DEVICEDATA, 0); | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
424 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
425 actualPointerDevicedata_Read = tmpBlockStart; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
426 |
| 38 | 427 } |
| 428 | |
| 429 | |
| 430 uint16_t ext_flash_read_devicedata(uint8_t *buffer, uint16_t max_length) | |
| 431 { | |
| 432 uint16_t length; | |
| 433 uint8_t length_lo, length_hi; | |
| 434 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
435 actualAddress = actualPointerDevicedata_Read; |
| 38 | 436 |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
437 length = 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
438 length_lo = 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
439 length_hi = 0; |
| 38 | 440 ext_flash_read_block_start(); |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
441 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
442 |
| 38 | 443 ext_flash_read_block(&length_lo, EF_DEVICEDATA); |
| 444 ext_flash_read_block(&length_hi, EF_DEVICEDATA); | |
| 445 | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
446 while ((length_lo != 0xFF) && (length_hi != 0xFF)) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
447 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
448 length = (length_hi * 256) + length_lo; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
449 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
450 if(length > max_length) |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
451 return 0; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
452 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
453 ext_flash_read_block_multi(buffer,length,EF_DEVICEDATA); |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
454 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
455 ext_flash_read_block(&length_lo, EF_DEVICEDATA); /* check if another devicedata set is available */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
456 ext_flash_read_block(&length_hi, EF_DEVICEDATA); /* length will be 0xFFFF if a empty memory is read */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
457 } |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
458 ext_flash_decf_address_ring(EF_DEVICEDATA); /* set pointer back to empty address */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
459 ext_flash_decf_address_ring(EF_DEVICEDATA); |
| 38 | 460 ext_flash_read_block_stop(); |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
461 |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
462 if(actualAddress > actualPointerDevicedata) /* the write pointer has not yet been set up probably */ |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
463 { |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
464 actualPointerDevicedata = actualAddress; |
|
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
420
diff
changeset
|
465 } |
| 38 | 466 return length; |
| 467 } | |
| 468 | |
| 469 | |
| 470 void ext_flash_write_vpm(SVpm *vpmInput) | |
| 471 { | |
| 472 uint8_t *pData; | |
| 473 const uint16_t length = sizeof(SVpm); | |
| 474 | |
| 475 uint8_t length_lo, length_hi; | |
| 476 uint8_t dataLength[2] = { 0 }; | |
| 477 | |
| 478 pData = (uint8_t *)vpmInput; | |
| 479 | |
| 480 actualPointerVPM = VPMSTART; | |
| 481 | |
| 482 length_lo = (uint8_t)(length & 0xFF); | |
| 483 length_hi = (uint8_t)(length >> 8); | |
| 484 dataLength[0] = length_lo; | |
| 485 dataLength[1] = length_hi; | |
| 486 | |
| 487 ef_write_block(dataLength,2, EF_VPMDATA, 0); | |
| 488 ef_write_block(pData,length, EF_VPMDATA, 0); | |
| 489 } | |
| 490 | |
| 491 | |
| 492 int ext_flash_read_vpm(SVpm *vpmOutput) | |
| 493 { | |
| 494 uint8_t *pData; | |
| 495 const uint16_t length = sizeof(SVpm); | |
| 496 uint8_t length_lo, length_hi; | |
| 497 int output; | |
| 498 | |
| 499 actualAddress = VPMSTART; | |
| 500 | |
| 501 ext_flash_read_block_start(); | |
| 502 ext_flash_read_block(&length_lo, EF_VPMDATA); | |
| 503 ext_flash_read_block(&length_hi, EF_VPMDATA); | |
| 504 if((length_lo == (uint8_t)(length & 0xFF)) | |
| 505 &&(length_hi == (uint8_t)(length >> 8))) | |
| 506 { | |
| 507 pData = (uint8_t *)vpmOutput; | |
| 508 for(uint16_t i = 0; i < length; i++) | |
| 509 ext_flash_read_block(&pData[i], EF_VPMDATA); | |
| 510 output = length; | |
| 511 } | |
| 512 else | |
| 513 output = 0; | |
| 514 | |
| 515 ext_flash_read_block_stop(); | |
| 516 return output; | |
| 517 } | |
| 518 | |
| 519 #ifdef DEMOMODE | |
| 520 void ext_flash_write_settings(void) | |
| 521 { | |
| 522 return; | |
| 523 } | |
| 524 #else | |
| 427 | 525 void ext_flash_write_settings(uint8_t resetRing) |
| 38 | 526 { |
| 527 uint8_t *pData; | |
| 528 const uint16_t length = sizeof(SSettings); | |
| 529 uint8_t length_lo, length_hi; | |
| 530 uint8_t dataLength[2] = { 0 }; | |
| 531 | |
| 532 ext_flash_disable_protection(); | |
| 533 | |
| 534 if(stateRealGetPointer()->lastKnownBatteryPercentage) | |
| 535 { | |
| 536 settingsGetPointer()->lastKnownBatteryPercentage = stateRealGetPointer()->lastKnownBatteryPercentage; | |
| 537 } | |
| 538 settingsGetPointer()->backup_localtime_rtc_tr = stateRealGetPointer()->lifeData.timeBinaryFormat; | |
| 539 settingsGetPointer()->backup_localtime_rtc_dr = stateRealGetPointer()->lifeData.dateBinaryFormat; | |
| 540 | |
| 541 pData = (uint8_t *)settingsGetPointer(); | |
| 542 | |
| 427 | 543 /* Reset the Ring to the start address if requested (e.g. because we write the default block during shutdown) */ |
| 544 if((resetRing) || ((actualPointerSettings + length) >= SETTINGSSTOP)) | |
| 545 { | |
| 546 actualPointerSettings = SETTINGSSTART; | |
| 547 } | |
| 38 | 548 |
| 549 length_lo = (uint8_t)(length & 0xFF); | |
| 550 length_hi = (uint8_t)(length >> 8); | |
| 551 dataLength[0] = length_lo; | |
| 552 dataLength[1] = length_hi; | |
| 553 | |
| 554 ef_write_block(dataLength,2, EF_SETTINGS, 0); | |
| 555 ef_write_block(pData,length, EF_SETTINGS, 0); | |
| 556 // ext_flash_enable_protection(); | |
| 557 } | |
| 558 #endif | |
| 559 | |
| 560 | |
| 561 /* CHANGES 150929 hw | |
| 562 * this now allows to read old settings too | |
| 563 * but make sure that everything is fixed in | |
| 564 * set_new_settings_missing_in_ext_flash | |
| 565 * new settings should be fine as they are added | |
| 566 * and loaded before calling this function | |
| 567 */ | |
| 568 uint8_t ext_flash_read_settings(void) | |
| 569 { | |
| 570 uint8_t returnValue = HAL_BUSY; | |
| 571 uint8_t *pData; | |
| 572 const uint16_t lengthStandardNow = sizeof(SSettings); | |
| 573 uint8_t length_lo, length_hi; | |
| 574 uint16_t lengthOnEEPROM; | |
| 575 uint32_t header; | |
| 576 SSettings *pSettings = settingsGetPointer(); | |
| 577 | |
| 578 actualAddress = SETTINGSSTART; | |
| 579 | |
| 580 ext_flash_read_block_start(); | |
| 581 ext_flash_read_block(&length_lo, EF_SETTINGS); | |
| 582 ext_flash_read_block(&length_hi, EF_SETTINGS); | |
| 583 | |
| 427 | 584 while ((length_lo != 0xFF) && (length_hi != 0xFF)) /* get the latest stored setting block */ |
| 38 | 585 { |
| 427 | 586 lengthOnEEPROM = length_hi * 256; |
| 587 lengthOnEEPROM += length_lo; | |
| 588 if(lengthOnEEPROM <= lengthStandardNow) | |
| 38 | 589 { |
| 427 | 590 ext_flash_read_block_multi(&header, 4, EF_SETTINGS); |
| 591 if((header <= pSettings->header) && (header >= pSettings->updateSettingsAllowedFromHeader)) | |
| 592 { | |
| 593 returnValue = HAL_OK; | |
| 594 pSettings->header = header; | |
| 595 pData = (uint8_t *)pSettings + 4; /* header */ | |
| 596 for(uint16_t i = 0; i < (lengthOnEEPROM-4); i++) | |
| 597 ext_flash_read_block(&pData[i], EF_SETTINGS); | |
| 598 } | |
| 599 else | |
| 600 { | |
| 601 returnValue = HAL_ERROR; | |
| 602 } | |
| 38 | 603 } |
| 427 | 604 ext_flash_read_block(&length_lo, EF_SETTINGS); |
| 605 ext_flash_read_block(&length_hi, EF_SETTINGS); | |
| 606 } | |
| 607 ext_flash_decf_address_ring(EF_SETTINGS); /* set pointer back to empty address */ | |
| 608 ext_flash_decf_address_ring(EF_SETTINGS); | |
| 609 ext_flash_read_block_stop(); | |
| 610 | |
| 611 if(actualAddress > actualPointerSettings) /* the write pointer has not yet been set up probably */ | |
| 612 { | |
| 613 actualPointerSettings = actualAddress; | |
| 38 | 614 } |
| 615 ext_flash_read_block_stop(); | |
| 616 return returnValue; | |
| 617 } | |
| 618 | |
| 619 | |
| 620 | |
| 621 | |
| 622 /* ext_flash_start_new_dive_log_and_set_actualPointerSample | |
| 623 * prepares the write sample pointer | |
| 624 * to be used by ext_flash_write_sample() | |
| 625 * to be set in the * pHeaderPreDive | |
| 626 * for write with ext_flash_create_new_dive_log() and ext_flash_close_new_dive_log() | |
| 627 */ | |
| 628 void ext_flash_start_new_dive_log_and_set_actualPointerSample(uint8_t *pHeaderPreDive) | |
| 629 { | |
| 630 convert_Type data; | |
| 631 SSettings *settings = settingsGetPointer(); | |
| 632 | |
| 633 /* new 5. Jan. 2015 */ | |
| 634 actualPointerSample = settings->logFlashNextSampleStartAddress; | |
| 635 | |
| 636 if(!ext_flash_test_remaining_space_of_page_empty(actualPointerSample, 4)) | |
| 637 ext_flash_set_to_begin_of_next_page(&actualPointerSample, EF_SAMPLE); | |
| 638 | |
| 639 if((actualPointerSample < SAMPLESTART) || (actualPointerSample > SAMPLESTOP)) | |
| 640 actualPointerSample = SAMPLESTART; | |
| 641 | |
| 642 data.u32bit = actualPointerSample; | |
| 643 pHeaderPreDive[2] = data.u8bit.byteLow; | |
| 644 pHeaderPreDive[3] = data.u8bit.byteMidLow; | |
| 645 pHeaderPreDive[4] = data.u8bit.byteMidHigh; | |
| 646 /* to start sample writing and header etc. pp. */ | |
| 647 ext_flash_disable_protection_for_logbook(); | |
| 648 } | |
| 649 | |
| 650 | |
| 651 /* ext_flash_create_new_dive_log | |
| 652 * uses the first header without HEADER2OFFSET | |
| 653 * for the header it is not important to be complete | |
| 654 * and can be reconstructed | |
| 655 * ext_flash_start_new_dive_log_and_set_actualPointerSample() | |
| 656 * has to be called before to set the actualPointerSample | |
| 657 * in the header | |
| 658 * the following func writes to header to the ext_flash | |
| 659 */ | |
| 660 void ext_flash_create_new_dive_log(uint8_t *pHeaderPreDive) | |
| 661 { | |
| 662 SSettings *settings; | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
663 uint8_t id; |
| 38 | 664 uint8_t header1, header2; |
| 665 | |
| 666 settings = settingsGetPointer(); | |
| 667 id = settings->lastDiveLogId; | |
| 668 | |
| 669 actualAddress = HEADERSTART + (0x800 * id); | |
| 670 ext_flash_read_block_start(); | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
671 ext_flash_read_block(&header1, EF_SAMPLE); /* the sample ring is increased instead of header... not sure if that is planned intention */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
672 ext_flash_read_block(&header2, EF_SAMPLE); /* does not matter because actual address is reset in write_block call */ |
| 38 | 673 ext_flash_read_block_stop(); |
| 674 | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
675 /* TODO Cleanup_Ref_2: The code below should not be necessary in case of a proper shutdown and startup */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
676 /* the implementation fixes an issue which might happen at Cleanup_Ref_1 (in case of more then 254 dives) */ |
| 38 | 677 if((header1 == 0xFA) && (header2 == 0xFA)) |
| 678 { | |
| 679 id += 1; /* 0-255, auto rollover */ | |
| 680 if(id & 1) | |
| 681 { | |
| 682 actualAddress = HEADERSTART + (0x800 * id); | |
| 683 ext_flash_read_block_start(); | |
| 684 ext_flash_read_block(&header1, EF_SAMPLE); | |
| 685 ext_flash_read_block(&header2, EF_SAMPLE); | |
| 686 ext_flash_read_block_stop(); | |
| 687 if((header1 == 0xFA) && (header2 == 0xFA)) | |
| 688 id += 1; | |
| 689 } | |
| 690 } | |
| 691 else | |
| 692 { | |
| 693 id = 0; | |
| 694 } | |
| 695 | |
| 696 settings->lastDiveLogId = id; | |
| 697 actualPointerHeader = HEADERSTART + (0x800 * id); | |
| 698 | |
| 699 if(pHeaderPreDive != 0) | |
| 700 ef_write_block(pHeaderPreDive,HEADERSIZE, EF_HEADER, 0); | |
| 701 } | |
| 702 | |
| 703 | |
| 704 void ext_flash_close_new_dive_log(uint8_t *pHeaderPostDive ) | |
| 705 { | |
| 706 SSettings * settings = settingsGetPointer(); | |
| 707 uint8_t id; | |
| 708 convert_Type startAddress; | |
| 709 convert_Type data; | |
| 710 uint32_t backup; | |
| 711 | |
| 712 uint8_t sampleData[3]; | |
| 713 actualAddress = actualPointerSample; | |
| 714 sampleData[0] = 0xFD; | |
| 715 sampleData[1] = 0xFD; | |
| 716 ext_flash_write_sample(sampleData, 2); | |
| 717 | |
| 718 /* end of sample data, pointing to the last sample 0xFD | |
| 719 */ | |
| 720 actualAddress = actualPointerSample; // change hw 17.09.2015 | |
| 721 ext_flash_decf_address_ring(EF_SAMPLE); // 17.09.2015: this decf actualAddress only!! | |
| 722 actualPointerSample = actualAddress; // change hw 17.09.2015 | |
| 723 data.u32bit = actualPointerSample; | |
| 724 | |
| 725 pHeaderPostDive[5] = data.u8bit.byteLow; | |
| 726 pHeaderPostDive[6] = data.u8bit.byteMidLow; | |
| 727 pHeaderPostDive[7] = data.u8bit.byteMidHigh; | |
| 728 | |
| 729 /* take data written before, calculate length and write | |
| 730 SLogbookHeader has different order: length (byte# 8,9,10) prior to profile version (byte# 11) | |
| 731 */ | |
| 732 startAddress.u8bit.byteLow = pHeaderPostDive[2]; | |
| 733 startAddress.u8bit.byteMidLow = pHeaderPostDive[3]; | |
| 734 startAddress.u8bit.byteMidHigh = pHeaderPostDive[4]; | |
| 735 startAddress.u8bit.byteHigh = 0; | |
| 736 | |
| 737 if(startAddress.u32bit < actualPointerSample) | |
| 738 data.u32bit = 1 + actualPointerSample - startAddress.u32bit; | |
| 739 else | |
| 740 data.u32bit = 2 + (actualPointerSample - SAMPLESTART) + (SAMPLESTOP - startAddress.u32bit); | |
| 741 | |
| 742 pHeaderPostDive[8] = data.u8bit.byteLow; | |
| 743 pHeaderPostDive[9] = data.u8bit.byteMidLow; | |
| 744 pHeaderPostDive[10] = data.u8bit.byteMidHigh; | |
| 745 | |
| 746 /* set id and write post-dive-header | |
| 747 */ | |
| 748 id = settings->lastDiveLogId; | |
| 749 actualPointerHeader = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 750 | |
| 751 ef_write_block(pHeaderPostDive,HEADERSIZE, EF_HEADER, 0); | |
| 752 | |
| 753 /* write length at beginning of sample | |
| 754 and write proper beginning for next dive to actualPointerSample | |
| 755 */ | |
| 756 backup = actualPointerSample; | |
| 757 actualPointerSample = startAddress.u32bit; // is still 0xFF | |
| 758 sampleData[0] = data.u8bit.byteLow; | |
| 759 sampleData[1] = data.u8bit.byteMidLow; | |
| 760 sampleData[2] = data.u8bit.byteMidHigh; | |
| 761 ext_flash_overwrite_sample_without_erase(sampleData, 3); | |
| 762 | |
| 763 actualAddress = backup; | |
| 764 ext_flash_incf_address(EF_SAMPLE); | |
| 765 actualPointerSample = actualAddress; | |
| 766 ext_flash_enable_protection(); | |
| 767 } | |
| 768 | |
| 769 | |
| 770 void ext_flash_write_sample(uint8_t *pSample, uint16_t length) | |
| 771 { | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
772 uint32_t actualAdressBackup = 0; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
773 |
| 38 | 774 ef_write_block(pSample,length, EF_SAMPLE, 0); |
| 775 | |
| 776 SSettings *settings = settingsGetPointer(); | |
| 777 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
778 |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
779 if(0xFFFF - (actualAddress & 0x0000FFFF) < 255) /* are we close to a sector border? */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
780 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
781 if (((actualAddress & 0x0000FFFF) != 0) && (preparedPageAddress == 0)) /* only prepare if not already at start of sector */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
782 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
783 actualAdressBackup = actualAddress; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
784 actualAddress = (actualAddress & 0xFFFF0000) + 0x00010000; /* Set to start of next 64k sector */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
785 if(actualAddress >= SAMPLESTOP) |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
786 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
787 actualAddress = SAMPLESTART; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
788 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
789 preparedPageAddress = actualAddress; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
790 ext_flash_erase64kB(); |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
791 actualAddress = actualAdressBackup; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
792 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
793 } |
| 38 | 794 } |
| 795 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
796 static void ext_flash_overwrite_sample_without_erase(uint8_t *pSample, uint16_t length) |
| 38 | 797 { |
| 798 ef_write_block(pSample,length, EF_SAMPLE, 1); | |
| 799 } | |
| 800 | |
| 801 | |
| 802 uint8_t ext_flash_count_dive_headers(void) | |
| 803 { | |
| 804 uint8_t id = 0; | |
| 805 uint8_t counter = 0; | |
| 806 uint16_t headerStartData = 0x0000; | |
| 807 | |
| 808 id = settingsGetPointer()->lastDiveLogId; | |
| 809 | |
| 810 do | |
| 811 { | |
| 812 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 813 ext_flash_read_block_start(); | |
| 814 ext_flash_read_block_multi((uint8_t *)&headerStartData, 2, EF_HEADER); | |
| 815 ext_flash_read_block_stop(); | |
| 816 counter++; | |
| 817 id -=1; | |
| 818 } while((headerStartData == 0xFAFA) && (counter < 255)); | |
| 819 return (counter - 1); | |
| 820 } | |
| 821 | |
| 822 | |
| 823 void ext_flash_read_dive_header(uint8_t *pHeaderToFill, uint8_t StepBackwards) | |
| 824 { | |
| 825 SSettings *settings; | |
| 826 uint8_t id; | |
| 827 uint16_t i; | |
| 828 | |
| 829 settings = settingsGetPointer(); | |
| 830 id = settings->lastDiveLogId; | |
| 831 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 832 | |
| 833 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 834 ext_flash_read_block_start(); | |
| 835 for(i = 0; i < HEADERSIZE; i++) | |
| 836 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
| 837 ext_flash_read_block_stop(); | |
| 838 | |
| 839 } | |
| 840 | |
| 841 void ext_flash_read_dive_header2(uint8_t *pHeaderToFill, uint8_t id, _Bool bOffset) | |
| 842 { | |
| 843 | |
| 844 uint16_t i; | |
| 845 actualAddress = HEADERSTART + (0x800 * id) ; | |
| 846 | |
| 847 if(bOffset) | |
| 848 actualAddress += HEADER2OFFSET; | |
| 849 ext_flash_read_block_start(); | |
| 850 for(i = 0; i < HEADERSIZE; i++) | |
| 851 ext_flash_read_block(&pHeaderToFill[i], EF_HEADER); | |
| 852 ext_flash_read_block_stop(); | |
| 853 } | |
| 854 | |
| 855 | |
| 856 uint32_t ext_flash_read_dive_raw_with_double_header_1K(uint8_t *data, uint32_t max_size, uint8_t StepBackwards) | |
| 857 { | |
| 858 if(max_size < 0x800) | |
| 859 return 0; | |
| 860 | |
| 861 uint8_t id; | |
| 862 convert_Type dataStart, dataEnd; | |
| 863 uint32_t LengthAll = 0; | |
| 864 | |
| 865 id = settingsGetPointer()->lastDiveLogId; | |
| 866 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 867 | |
| 868 // clear data | |
| 869 for(int i=0;i<0x800;i++) | |
| 870 data[i] = 0xFF; | |
| 871 | |
| 872 // copy primary/pre-dive | |
| 873 actualAddress = HEADERSTART + (0x800 * id); | |
| 874 ext_flash_read_block_start(); | |
| 875 for(int i = 0; i < HEADERSIZE; i++) | |
| 876 ext_flash_read_block(&data[i], EF_HEADER); | |
| 877 ext_flash_read_block_stop(); | |
| 878 | |
| 879 // copy main/secondary/post-dive | |
| 880 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 881 ext_flash_read_block_start(); | |
| 882 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 883 ext_flash_read_block(&data[i], EF_HEADER); | |
| 884 ext_flash_read_block_stop(); | |
| 885 | |
| 886 // data | |
| 887 | |
| 888 dataStart.u8bit.byteHigh = 0; | |
| 889 dataStart.u8bit.byteLow = data[0x402]; | |
| 890 dataStart.u8bit.byteMidLow = data[0x403]; | |
| 891 dataStart.u8bit.byteMidHigh = data[0x404]; | |
| 892 | |
| 893 dataEnd.u8bit.byteHigh = 0; | |
| 894 dataEnd.u8bit.byteLow = data[0x405]; | |
| 895 dataEnd.u8bit.byteMidLow = data[0x406]; | |
| 896 dataEnd.u8bit.byteMidHigh = data[0x407]; | |
| 897 | |
| 898 actualPointerSample = dataStart.u32bit; | |
| 899 if(dataEnd.u32bit >= dataStart.u32bit) | |
| 900 LengthAll = 1 + dataEnd.u32bit - dataStart.u32bit; | |
| 901 else | |
| 902 LengthAll = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
| 903 | |
| 904 LengthAll += 0x800; | |
| 905 | |
| 906 if(LengthAll > max_size) | |
| 907 return 0x800; | |
| 908 | |
| 909 actualAddress = actualPointerSample; | |
| 910 ext_flash_read_block_start(); | |
| 911 for(uint32_t i = 0x800; i < LengthAll; i++) | |
| 912 ext_flash_read_block(&data[i], EF_SAMPLE); | |
| 913 ext_flash_read_block_stop(); | |
| 914 return LengthAll; | |
| 915 } | |
| 916 | |
| 917 void ext_flash_write_dive_raw_with_double_header_1K(uint8_t *data, uint32_t length) | |
| 918 { | |
| 919 convert_Type dataStart, dataEnd; | |
| 920 SLogbookHeader headerTemp; | |
| 921 | |
| 922 // set actualPointerSample and get pointer to sample storage and disable flash write protect | |
| 923 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t *)&headerTemp); | |
| 924 | |
| 925 dataStart.u8bit.byteHigh = 0; | |
| 926 dataStart.u8bit.byteLow = headerTemp.pBeginProfileData[0]; | |
| 927 dataStart.u8bit.byteMidLow = headerTemp.pBeginProfileData[1]; | |
| 928 dataStart.u8bit.byteMidHigh = headerTemp.pBeginProfileData[2]; | |
| 929 | |
| 930 dataEnd.u32bit = dataStart.u32bit + length - 0x801; | |
| 931 if(dataEnd.u32bit > SAMPLESTOP) | |
| 932 dataEnd.u32bit -= SAMPLESTOP + SAMPLESTART - 1; | |
| 933 | |
| 934 data[0x002] = data[0x402] = dataStart.u8bit.byteLow; | |
| 935 data[0x003] = data[0x403] = dataStart.u8bit.byteMidLow; | |
| 936 data[0x004] = data[0x404] = dataStart.u8bit.byteMidHigh; | |
| 937 data[0x005] = data[0x405] = dataEnd.u8bit.byteLow; | |
| 938 data[0x006] = data[0x406] = dataEnd.u8bit.byteMidLow; | |
| 939 data[0x007] = data[0x407] = dataEnd.u8bit.byteMidHigh; | |
| 940 | |
| 941 // set actualPointerHeader to next free header and update lastDiveLogId | |
| 942 ext_flash_create_new_dive_log(0); | |
| 943 | |
| 944 // copy header data | |
| 945 ef_write_block(data,0x800,EF_HEADER, 1); | |
| 946 | |
| 947 // copy sample data | |
| 948 ef_write_block(&data[0x800], length-0x800, EF_SAMPLE, 1); | |
| 949 | |
| 950 // update logFlashNextSampleStartAddress | |
| 951 settingsGetPointer()->logFlashNextSampleStartAddress = actualPointerSample; | |
| 952 } | |
| 953 | |
| 954 | |
| 955 // =============================================================================== | |
| 956 // ext_flash_read_header_memory | |
| 957 /// @brief This function returns the entire header space 1:1 | |
| 958 /// @date 04-April-2016 | |
| 959 /// | |
| 960 /// @param *data 256KB output | |
| 961 // =============================================================================== | |
| 962 void ext_flash_read_header_memory(uint8_t *data) | |
| 963 { | |
| 964 actualAddress = HEADERSTART; | |
| 965 actualPointerHeader = actualAddress; | |
| 966 ext_flash_read_block_start(); | |
| 967 for(int i=0;i<8;i++) | |
| 968 ext_flash_read_block_multi(&data[0x8000 * i], 0x8000, EF_HEADER); | |
| 969 ext_flash_read_block_stop(); | |
| 970 } | |
| 971 | |
| 972 | |
| 973 // =============================================================================== | |
| 974 // ext_flash_read_header_memory | |
| 975 /// @brief This function erases and overwrites the entire logbook header block | |
| 976 /// @date 04-April-2016 | |
| 977 /// | |
| 978 /// @param *data 256KB input of header memory 1:1 | |
| 979 // =============================================================================== | |
| 980 void ext_flash_write_header_memory(uint8_t *data) | |
| 981 { | |
| 982 actualAddress = HEADERSTART; | |
| 983 actualPointerHeader = actualAddress; | |
| 984 ef_write_block(data, 0x40000, EF_HEADER, 0); | |
| 985 } | |
| 986 | |
| 987 | |
| 988 void ext_flash_open_read_sample(uint8_t StepBackwards, uint32_t *totalNumberOfBytes) | |
| 989 { | |
| 990 SSettings *settings = settingsGetPointer(); | |
| 991 uint8_t id; | |
| 992 convert_Type dataStart, dataEnd; | |
| 993 uint8_t header1, header2; | |
| 994 | |
| 995 id = settings->lastDiveLogId; | |
| 996 id -= StepBackwards; /* 0-255, auto rollover */ | |
| 997 # | |
| 998 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 999 actualPointerHeader = actualAddress; | |
| 1000 | |
| 1001 ext_flash_read_block_start(); | |
| 1002 /* little endian */ | |
| 1003 ext_flash_read_block(&header1, EF_HEADER); | |
| 1004 ext_flash_read_block(&header2, EF_HEADER); | |
| 1005 dataStart.u8bit.byteHigh = 0; | |
| 1006 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1007 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1008 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1009 dataEnd.u8bit.byteHigh = 0; | |
| 1010 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
| 1011 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
| 1012 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
| 1013 ext_flash_read_block_stop(); | |
| 1014 | |
| 1015 actualPointerSample = dataStart.u32bit; | |
| 1016 if(dataEnd.u32bit >= dataStart.u32bit) | |
| 1017 LengthLeftSampleRead = 1 + dataEnd.u32bit - dataStart.u32bit; | |
| 1018 else | |
| 1019 LengthLeftSampleRead = 2 + (dataStart.u32bit - SAMPLESTART) + (SAMPLESTOP - dataEnd.u32bit); | |
| 1020 *totalNumberOfBytes = LengthLeftSampleRead; | |
| 1021 | |
| 1022 actualAddress = actualPointerSample; | |
| 1023 ext_flash_read_block_start(); | |
| 1024 } | |
| 1025 | |
| 1026 | |
| 1027 void ext_flash_read_next_sample_part(uint8_t *pSample, uint8_t length) | |
| 1028 { | |
| 1029 for(uint16_t i = 0; i < length; i++) | |
| 1030 ext_flash_read_block(&pSample[i], EF_SAMPLE); | |
| 1031 } | |
| 1032 | |
| 1033 | |
| 1034 void ext_flash_close_read_sample(void) | |
| 1035 { | |
| 1036 actualPointerSample = actualAddress; | |
| 1037 ext_flash_read_block_stop(); | |
| 1038 } | |
| 1039 | |
| 1040 | |
| 1041 void ext_flash_set_entry_point(void) | |
| 1042 { | |
| 1043 entryPoint = actualAddress; | |
| 1044 } | |
| 1045 | |
| 1046 | |
| 1047 void ext_flash_reopen_read_sample_at_entry_point(void) | |
| 1048 { | |
| 1049 error_led_on(); | |
| 1050 chip_unselect(); | |
| 1051 wait_chip_not_busy(); | |
| 1052 | |
| 1053 actualAddress = entryPoint; | |
| 1054 ext_flash_read_block_start(); | |
| 1055 error_led_off(); | |
| 1056 } | |
| 1057 | |
| 1058 /* | |
| 1059 uint8_t ext_flash_point_to_64k_block_in_headerSpace(uint8_t logId) | |
| 1060 { | |
| 1061 uint32_t pointerToData = logId * 0x800; | |
| 1062 | |
| 1063 return pointerToData / 0x10000; | |
| 1064 } | |
| 1065 */ | |
| 1066 | |
| 1067 | |
| 1068 // =============================================================================== | |
| 1069 // ext_flash_repair_dive_numbers_starting_count_helper | |
| 1070 /// @brief | |
| 1071 /// @date 22-June-2016 | |
| 1072 | |
| 1073 // =============================================================================== | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1074 static uint16_t ext_flash_repair_dive_numbers_starting_count_helper(uint8_t *data, uint8_t *change64k, uint16_t startNumber, uint8_t lastLogId) |
| 38 | 1075 { |
| 1076 const uint32_t headerStep = 0x800; | |
| 1077 uint8_t actualLogId = 0; | |
| 1078 uint16_t oldNumber = 0; | |
| 1079 uint16_t actualNumber = 0; | |
| 1080 SLogbookHeader *ptrLogbookHeader = 0; | |
| 1081 | |
| 1082 if(startNumber == 0) | |
| 1083 return 0; | |
| 1084 | |
| 1085 actualNumber = startNumber - 1; | |
| 1086 | |
| 282 | 1087 // where is the oldest dive (Which is now getting startNumber) |
| 38 | 1088 // use first header for ease (without HEADER2OFFSET for end of dive header) |
| 1089 // compare for lastLogId to prevent endless loop | |
| 1090 | |
| 1091 if(*(uint16_t*)&data[lastLogId * headerStep] != 0xFAFA) | |
| 1092 return 0; | |
| 1093 | |
| 1094 actualLogId = lastLogId - 1; | |
| 1095 while((*(uint16_t*)&data[actualLogId * headerStep] == 0xFAFA) && (actualLogId != lastLogId)) | |
| 1096 { | |
| 1097 actualLogId--; | |
| 1098 } | |
| 1099 | |
| 1100 // now pointing to one behind the last | |
| 1101 while(actualLogId != lastLogId) | |
| 1102 { | |
| 1103 actualLogId++; | |
| 1104 actualNumber++; | |
| 1105 ptrLogbookHeader = (SLogbookHeader *)&data[actualLogId * headerStep]; | |
| 1106 | |
| 1107 oldNumber = ptrLogbookHeader->diveNumber; | |
| 1108 if(oldNumber != actualNumber) | |
| 1109 { | |
| 1110 // change64k[ext_flash_point_to_64k_block_in_headerSpace(actualLogId )] = 1; | |
| 1111 change64k[(actualLogId * 0x800)/0x10000] = 1; | |
| 1112 ptrLogbookHeader->diveNumber = actualNumber; | |
| 1113 ptrLogbookHeader = (SLogbookHeader *)(&data[actualLogId * headerStep] + HEADER2OFFSET); | |
| 1114 ptrLogbookHeader->diveNumber = actualNumber; | |
| 1115 } | |
| 1116 } | |
| 1117 | |
| 1118 return actualNumber; | |
| 1119 } | |
| 1120 | |
| 1121 // =============================================================================== | |
| 1122 // ext_flash_repair_SPECIAL_dive_numbers_starting_count_with | |
| 1123 /// @brief This function | |
| 1124 /// @date 04-April-2016 | |
| 282 | 1125 /// problem (160621): 64K blocks (32 dives) in the new flash memory chip |
| 1126 /// This block needs to be deleted | |
| 1127 /// these where only 4KB block before | |
| 38 | 1128 /// @output endCount, last diveNumber |
| 1129 | |
| 1130 // =============================================================================== | |
| 1131 uint16_t ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) | |
| 1132 { | |
| 1133 uint32_t logCopyDataPtr = 0; | |
| 1134 uint8_t *data; | |
| 1135 uint16_t lastCount; | |
| 282 | 1136 uint8_t listOfChanged64kBlocks[8]; // 32 dives each 64K |
| 38 | 1137 |
| 1138 logCopyDataPtr = getFrame(97); | |
| 1139 data = (uint8_t *)logCopyDataPtr; | |
| 1140 | |
| 1141 for(int i=0;i<8;i++) | |
| 1142 listOfChanged64kBlocks[i] = 0; | |
| 1143 | |
| 1144 actualAddress = HEADERSTART; | |
| 1145 ext_flash_read_block_start(); | |
| 1146 ext_flash_read_block_multi(data,0x100000,EF_HEADER); | |
| 1147 ext_flash_read_block_stop(); | |
| 1148 | |
| 1149 lastCount = ext_flash_repair_dive_numbers_starting_count_helper(data, listOfChanged64kBlocks, startCount, settingsGetPointer()->lastDiveLogId); | |
| 1150 | |
| 1151 for(int i=0;i<8;i++) | |
| 1152 { | |
| 1153 if(listOfChanged64kBlocks[i] != 0) | |
| 1154 { | |
| 1155 actualPointerHeader = HEADERSTART + (i * 0x10000); | |
| 1156 ef_write_block(&data[i * 0x10000], 0x10000, EF_HEADER, 0); | |
| 1157 } | |
| 1158 } | |
| 1159 | |
| 1160 releaseFrame(97,logCopyDataPtr); | |
| 1161 if(settingsGetPointer()->totalDiveCounter < lastCount) | |
| 1162 { | |
| 1163 settingsGetPointer()->totalDiveCounter = lastCount; | |
| 1164 } | |
| 1165 return lastCount; | |
| 1166 } | |
| 1167 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1168 /* |
| 38 | 1169 void OLD_ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(uint16_t startCount) |
| 1170 { | |
| 1171 uint16_t counterStorage[256]; | |
| 1172 uint8_t start = 0xFF; | |
| 1173 uint32_t logCopyDataPtr = 0; | |
| 1174 uint8_t *data; | |
| 1175 uint8_t startAbsolute = 0; | |
| 1176 int16_t count = 0; | |
| 1177 _Bool repair = 0; | |
| 1178 uint8_t startBackup = 0; | |
| 1179 | |
| 1180 SLogbookHeader tempLogbookHeader; | |
| 1181 SLogbookHeader *ptrHeaderInData1a; | |
| 1182 SLogbookHeader *ptrHeaderInData1b; | |
| 1183 SLogbookHeader *ptrHeaderInData2a; | |
| 1184 SLogbookHeader *ptrHeaderInData2b; | |
| 1185 | |
| 1186 logCopyDataPtr = getFrame(97); | |
| 1187 data = (uint8_t *)logCopyDataPtr; | |
| 1188 ptrHeaderInData1a = (SLogbookHeader *)logCopyDataPtr; | |
| 1189 ptrHeaderInData1b = (SLogbookHeader *)(logCopyDataPtr + HEADER2OFFSET); | |
| 1190 ptrHeaderInData2a = (SLogbookHeader *)(logCopyDataPtr + 0x800); | |
| 1191 ptrHeaderInData2b = (SLogbookHeader *)(logCopyDataPtr + 0x800 + HEADER2OFFSET); | |
| 1192 | |
| 1193 // get data | |
| 1194 for(int StepBackwards = 0; StepBackwards < 255; StepBackwards++) | |
| 1195 { | |
| 1196 logbook_getHeader(StepBackwards, &tempLogbookHeader); | |
| 1197 counterStorage[StepBackwards+1] = tempLogbookHeader.diveNumber; | |
| 1198 if(tempLogbookHeader.diveHeaderStart == 0xFAFA) | |
| 1199 start = StepBackwards; | |
| 1200 else | |
| 1201 break; | |
| 1202 } | |
| 1203 | |
| 1204 if(start == 0xFF) | |
| 1205 return; | |
| 1206 | |
| 1207 count = start + 1; | |
| 1208 startAbsolute = settingsGetPointer()->lastDiveLogId; | |
| 1209 | |
| 1210 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1211 |
| 38 | 1212 if(start%2) |
| 1213 { | |
| 1214 if(counterStorage[start] != startCount) | |
| 1215 { | |
| 1216 // clear data | |
| 1217 for(int i=0;i<0x800*2;i++) | |
| 1218 data[i] = 0xFF; | |
| 1219 | |
| 1220 uint8_t id = settingsGetPointer()->lastDiveLogId; | |
| 1221 id -= start; // 0-255, auto rollover | |
| 1222 | |
| 1223 // copy primary/pre-dive | |
| 1224 actualAddress = HEADERSTART + (0x800 * id); | |
| 1225 ext_flash_read_block_start(); | |
| 1226 for(int i = 0; i < HEADERSIZE; i++) | |
| 1227 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1228 ext_flash_read_block_stop(); | |
| 1229 | |
| 1230 // copy main/secondary/post-dive | |
| 1231 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1232 ext_flash_read_block_start(); | |
| 1233 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1234 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1235 ext_flash_read_block_stop(); | |
| 1236 | |
| 1237 // repair | |
| 1238 ptrHeaderInData2a->diveNumber = startCount; | |
| 1239 ptrHeaderInData2b->diveNumber = startCount; | |
| 1240 startCount++; | |
| 1241 | |
| 1242 // write | |
| 1243 actualAddress = HEADERSTART + (0x800 * (id-1)); | |
| 1244 ef_write_block(data,0x800*2,EF_HEADER, 0); | |
| 1245 } | |
| 1246 start--; | |
| 1247 } | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1248 |
| 38 | 1249 // for(int count = start; count > -1; count -= 2) |
| 1250 | |
| 1251 while(count > 0) | |
| 1252 { | |
| 1253 // clear data | |
| 1254 for(int i=0;i<0x1000;i++) | |
| 1255 data[i] = 0xFF; | |
| 1256 | |
| 1257 repair = 0; | |
| 1258 | |
| 1259 startBackup = startAbsolute; | |
| 1260 | |
| 1261 if(startAbsolute%2) // 0x800 to 0x1000 | |
| 1262 { | |
| 1263 // copy second pre-dive | |
| 1264 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1265 ext_flash_read_block_start(); | |
| 1266 for(int i = 0x800; i < HEADERSIZE+0x800; i++) | |
| 1267 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1268 ext_flash_read_block_stop(); | |
| 1269 | |
| 1270 // copy second post-dive | |
| 1271 actualAddress = HEADERSTART + HEADER2OFFSET + (0x800 * startAbsolute); | |
| 1272 ext_flash_read_block_start(); | |
| 1273 for(int i = 0xC00; i < HEADERSIZE+0xC00; i++) | |
| 1274 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1275 ext_flash_read_block_stop(); | |
| 1276 | |
| 1277 if(counterStorage[count] != startCount) | |
| 1278 { | |
| 1279 ptrHeaderInData2a->diveNumber = startCount; | |
| 1280 ptrHeaderInData2b->diveNumber = startCount; | |
| 1281 repair = 1; | |
| 1282 } | |
| 1283 startCount += 1; | |
| 1284 | |
| 1285 startAbsolute -= 1; | |
| 1286 count -= 1; | |
| 1287 | |
| 1288 if(count > 0) | |
| 1289 { | |
| 1290 // copy first pre-dive | |
| 1291 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1292 ext_flash_read_block_start(); | |
| 1293 for(int i = 0; i < HEADERSIZE; i++) | |
| 1294 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1295 ext_flash_read_block_stop(); | |
| 1296 | |
| 1297 // copy first post-dive | |
| 1298 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1299 ext_flash_read_block_start(); | |
| 1300 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1301 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1302 ext_flash_read_block_stop(); | |
| 1303 | |
| 1304 if(counterStorage[count] != startCount) | |
| 1305 { | |
| 1306 ptrHeaderInData1a->diveNumber = startCount; | |
| 1307 ptrHeaderInData1b->diveNumber = startCount; | |
| 1308 repair = 1; | |
| 1309 } | |
| 1310 startCount += 1; | |
| 1311 | |
| 1312 startAbsolute -= 1; | |
| 1313 count -= 1; | |
| 1314 } | |
| 1315 } | |
| 1316 else | |
| 1317 { | |
| 1318 // copy first pre-dive | |
| 1319 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1320 ext_flash_read_block_start(); | |
| 1321 for(int i = 0; i < HEADERSIZE; i++) | |
| 1322 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1323 ext_flash_read_block_stop(); | |
| 1324 | |
| 1325 // copy first post-dive | |
| 1326 actualAddress = HEADERSTART + (0x800 * startAbsolute); | |
| 1327 ext_flash_read_block_start(); | |
| 1328 for(int i = 0x400; i < HEADERSIZE+0x400; i++) | |
| 1329 ext_flash_read_block(&data[i], EF_HEADER); | |
| 1330 ext_flash_read_block_stop(); | |
| 1331 | |
| 1332 if(counterStorage[count] != startCount) | |
| 1333 { | |
| 1334 ptrHeaderInData1a->diveNumber = startCount; | |
| 1335 ptrHeaderInData1b->diveNumber = startCount; | |
| 1336 repair = 1; | |
| 1337 } | |
| 1338 startCount += 1; | |
| 1339 | |
| 1340 startAbsolute -= 1; | |
| 1341 count -= 1; | |
| 1342 } | |
| 1343 | |
| 1344 // write | |
| 1345 if(repair) | |
| 1346 { | |
| 1347 actualPointerHeader = HEADERSTART + (0x1000 * startBackup%2); | |
| 1348 ef_write_block(data,0x1000,EF_HEADER, 0); | |
| 1349 } | |
| 1350 } | |
| 1351 releaseFrame(97,logCopyDataPtr); | |
| 1352 settingsGetPointer()->totalDiveCounter = startCount; | |
| 1353 } | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1354 */ |
| 38 | 1355 |
| 1356 // =============================================================================== | |
| 1357 // ext_flash_repair_dive_log | |
| 1358 /// @brief This function | |
| 1359 /// does set | |
| 1360 /// logFlashNextSampleStartAddress | |
| 1361 /// and | |
| 1362 /// lastDiveLogId | |
| 1363 /// | |
| 1364 void ext_flash_repair_dive_log(void) | |
| 1365 { | |
| 1366 uint8_t header1, header2; | |
| 1367 convert_Type dataStart; | |
| 1368 | |
| 1369 for(int id = 0; id < 255;id++) | |
| 1370 { | |
| 1371 actualAddress = HEADERSTART + (0x800 * id); | |
| 1372 ext_flash_read_block_start(); | |
| 1373 ext_flash_read_block(&header1, EF_HEADER); | |
| 1374 ext_flash_read_block(&header2, EF_HEADER); | |
| 1375 dataStart.u8bit.byteHigh = 0; | |
| 1376 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1377 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1378 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1379 ext_flash_read_block_stop(); | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1380 if((header1 == 0xFA) && (header2 == 0xFA)) /* Header is indicating the start of a dive */ |
| 38 | 1381 { |
| 1382 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1383 ext_flash_read_block_start(); | |
| 1384 ext_flash_read_block(&header1, EF_HEADER); | |
| 1385 ext_flash_read_block(&header2, EF_HEADER); | |
| 1386 ext_flash_read_block_stop(); | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1387 if((header1 != 0xFA) || (header2 != 0xFA)) /* Secondary header was not written at the end of a dive */ |
| 38 | 1388 { |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
1389 actualPointerSample = dataStart.u32bit; /* Set datapointer to position stored in header written at beginning of dive */ |
| 38 | 1390 actualAddress = actualPointerSample; |
| 1391 logbook_recover_brokenlog(id); | |
| 1392 SSettings *settings = settingsGetPointer(); | |
| 1393 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
| 1394 } | |
| 1395 } | |
| 1396 } | |
| 1397 ext_flash_find_start(); | |
| 1398 } | |
| 1399 | |
| 1400 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1401 static void ext_flash_find_start(void) |
| 38 | 1402 { |
| 1403 uint8_t id; | |
| 1404 uint8_t header1, header2; | |
| 1405 convert_Type dataStart, dataEnd; | |
| 1406 | |
|
429
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1407 /* TODO Cleanup_Ref_1: cleanup logFlashNextSampleStartAddress and lastDiveLogId */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1408 /* The implementation below would cause problems in case more then 254 dives would be done. */ |
|
7f351c25608a
Marked possible code improvment for future activities:
ideenmodellierer
parents:
427
diff
changeset
|
1409 /* This is avoided by Cleanup_Ref2 */ |
| 38 | 1410 for(id = 0; id < 255;id++) |
| 1411 { | |
| 1412 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1413 ext_flash_read_block_start(); | |
| 1414 ext_flash_read_block(&header1, EF_HEADER); | |
| 1415 ext_flash_read_block(&header2, EF_HEADER); | |
| 1416 dataStart.u8bit.byteHigh = 0; | |
| 1417 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1418 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1419 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1420 ext_flash_read_block_stop(); | |
| 1421 if((header1 == 0xFF) && (header2 == 0xFF)) | |
| 1422 { | |
| 1423 break; | |
| 1424 } | |
| 1425 } | |
| 1426 id--; | |
| 1427 SSettings *settings = settingsGetPointer(); | |
| 1428 settings->lastDiveLogId = id; | |
| 1429 | |
| 1430 actualAddress = HEADERSTART + (0x800 * id) + HEADER2OFFSET; | |
| 1431 actualPointerHeader = actualAddress; | |
| 1432 | |
| 1433 ext_flash_read_block_start(); | |
| 1434 | |
| 1435 ext_flash_read_block(&header1, EF_HEADER); | |
| 1436 ext_flash_read_block(&header2, EF_HEADER); | |
| 1437 dataStart.u8bit.byteHigh = 0; | |
| 1438 ext_flash_read_block(&dataStart.u8bit.byteLow, EF_HEADER); | |
| 1439 ext_flash_read_block(&dataStart.u8bit.byteMidLow, EF_HEADER); | |
| 1440 ext_flash_read_block(&dataStart.u8bit.byteMidHigh, EF_HEADER); | |
| 1441 dataEnd.u8bit.byteHigh = 0; | |
| 1442 ext_flash_read_block(&dataEnd.u8bit.byteLow, EF_HEADER); | |
| 1443 ext_flash_read_block(&dataEnd.u8bit.byteMidLow, EF_HEADER); | |
| 1444 ext_flash_read_block(&dataEnd.u8bit.byteMidHigh, EF_HEADER); | |
| 1445 ext_flash_read_block_stop(); | |
| 1446 | |
| 1447 //Find free space | |
| 1448 if((header1 == 0xFA) && (header2 == 0xFA)) | |
| 1449 { | |
| 1450 uint8_t uiRead = 0; | |
| 1451 int countFF = 0; | |
| 1452 //End of last complete dive | |
| 1453 actualPointerSample = dataEnd.u32bit ; | |
| 1454 actualAddress = actualPointerSample; | |
| 1455 //Check if there are samples of dives with less than half a minute | |
| 1456 while(true) | |
| 1457 { | |
| 1458 ext_flash_read_block_start(); | |
| 1459 ext_flash_read_block(&uiRead, EF_SAMPLE); | |
| 1460 if(uiRead == 0xFF) | |
| 1461 countFF++; | |
| 1462 else | |
| 1463 countFF = 0; | |
| 1464 | |
| 1465 | |
| 1466 | |
| 1467 if(countFF == 10) | |
| 1468 { | |
| 1469 actualAddress -= 10; | |
| 1470 break; | |
| 1471 } | |
| 1472 | |
| 1473 //New page: clear | |
| 1474 if(ext_flash_erase_if_on_page_start()) | |
| 1475 break; | |
| 1476 } | |
| 1477 // Set new start address | |
| 1478 actualPointerSample = actualAddress; | |
| 1479 settings->logFlashNextSampleStartAddress = actualPointerSample; | |
| 1480 } | |
| 1481 else | |
| 1482 { | |
| 1483 settings->logFlashNextSampleStartAddress = SAMPLESTART; | |
| 1484 } | |
| 1485 } | |
| 1486 | |
| 1487 | |
| 1488 #endif | |
| 1489 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1490 static void ext_flash_disable_protection(void) |
| 38 | 1491 { |
| 1492 /* | |
| 1493 extFlashStatusBit8_Type status; | |
| 1494 | |
| 1495 status.uw = 0; | |
| 1496 | |
| 1497 wait_chip_not_busy(); | |
| 1498 write_spi(0x50,RELEASE); // EWSR | |
| 1499 write_spi(0x01,HOLDCS); // WRSR | |
| 1500 write_spi(status.uw,RELEASE); // new status | |
| 1501 */ | |
| 1502 } | |
| 1503 | |
| 1504 | |
| 1505 void ext_flash_disable_protection_for_logbook(void) | |
| 1506 { | |
| 1507 /* | |
| 1508 extFlashStatusBit8_Type status; | |
| 1509 | |
| 1510 status.uw = 0; | |
| 1511 status.ub.BlockProtect0 = 1; | |
| 1512 status.ub.BlockProtect1 = 0; | |
| 1513 status.ub.BlockProtect2 = 1; | |
| 1514 status.ub.BlockProtect3 = 0; // not set in OSTC3. Why? | |
| 1515 | |
| 1516 wait_chip_not_busy(); | |
| 1517 write_spi(0x50,RELEASE); // EWSR | |
| 1518 write_spi(0x01,HOLDCS); // WRSR | |
| 1519 write_spi(status.uw,RELEASE); // new status | |
| 1520 */ | |
| 1521 } | |
| 1522 | |
| 1523 | |
| 1524 void ext_flash_enable_protection(void) | |
| 1525 { | |
| 1526 /* | |
| 1527 extFlashStatusBit8_Type status; | |
| 1528 | |
| 1529 status.uw = 0; | |
| 1530 status.ub.BlockProtect0 = 1; | |
| 1531 status.ub.BlockProtect1 = 1; | |
| 1532 status.ub.BlockProtect2 = 1; | |
| 1533 status.ub.BlockProtect3 = 1; // not set in OSTC3. Why? | |
| 1534 | |
| 1535 wait_chip_not_busy(); | |
| 1536 write_spi(0x50,RELEASE); // EWSR | |
| 1537 write_spi(0x01,HOLDCS); // WRSR | |
| 1538 write_spi(status.uw,RELEASE); // new status | |
| 1539 */ | |
| 1540 } | |
| 1541 | |
| 1542 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1543 /*void ext_flash_erase_chip(void) |
| 38 | 1544 { |
| 1545 wait_chip_not_busy(); | |
| 1546 write_spi(0x06,RELEASE); | |
| 1547 write_spi(0x60,RELEASE); | |
| 1548 wait_chip_not_busy(); | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1549 }*/ |
| 38 | 1550 |
| 1551 void ext_flash_erase_firmware(void) | |
| 1552 { | |
| 1553 uint32_t size, blocks_64k; | |
| 1554 | |
| 1555 actualAddress = FWSTART; | |
| 1556 size = 1 + FWSTOP - FWSTART; | |
| 1557 blocks_64k = size / 0x10000; | |
| 1558 ef_erase_64K(blocks_64k); | |
| 1559 } | |
| 1560 | |
| 1561 void ext_flash_erase_firmware2(void) | |
| 1562 { | |
| 1563 uint32_t size, blocks_64k; | |
| 1564 | |
| 1565 actualAddress = FWSTART2; | |
| 1566 size = 1 + FWSTOP2 - FWSTART2; | |
| 1567 blocks_64k = size / 0x10000; | |
| 1568 ef_erase_64K(blocks_64k); | |
| 1569 } | |
| 1570 | |
| 1571 | |
| 1572 | |
| 1573 void ext_flash_erase_logbook(void) | |
| 1574 { | |
| 1575 uint32_t size, blocks_64k; | |
| 1576 | |
| 1577 ext_flash_disable_protection_for_logbook(); | |
| 1578 | |
| 1579 actualAddress = SAMPLESTART; | |
| 1580 size = 1 + SAMPLESTOP - SAMPLESTART; | |
| 1581 blocks_64k = size / 0x10000; | |
| 1582 ef_erase_64K(blocks_64k); | |
| 1583 | |
| 1584 actualAddress = HEADERSTART; | |
| 1585 size = 1 + HEADERSTOP - HEADERSTART; | |
| 1586 blocks_64k = size / 0x10000; | |
| 1587 ef_erase_64K(blocks_64k); | |
| 1588 | |
| 1589 ext_flash_enable_protection(); | |
| 1590 } | |
| 1591 | |
| 1592 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1593 static void ext_flash_erase4kB(void) |
| 38 | 1594 { |
| 1595 wait_chip_not_busy(); | |
| 1596 write_spi(0x06,RELEASE);/* WREN */ | |
| 1597 write_spi(0x20,HOLDCS);/* sector erase cmd */ | |
| 1598 write_address(RELEASE); | |
| 1599 } | |
| 1600 | |
| 282 | 1601 /* be careful - might not work with entire family and other products |
| 38 | 1602 * see page 14 of LOGBOOK_V3_S25FS-S_00-271247.pdf |
| 1603 */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1604 static void ext_flash_erase32kB(void) |
| 38 | 1605 { |
| 1606 uint32_t actualAddress_backup; | |
| 1607 | |
| 1608 actualAddress_backup = actualAddress; | |
| 1609 actualAddress = 0; | |
| 1610 wait_chip_not_busy(); | |
| 1611 write_spi(0x06,RELEASE);/* WREN */ | |
| 1612 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
| 1613 write_address(RELEASE); | |
| 1614 actualAddress = actualAddress_backup; | |
| 1615 } | |
| 1616 | |
| 1617 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1618 static void ext_flash_erase64kB(void) |
| 38 | 1619 { |
| 1620 wait_chip_not_busy(); | |
| 1621 write_spi(0x06,RELEASE);/* WREN */ | |
| 1622 write_spi(0xD8,HOLDCS);/* sector erase cmd */ | |
| 1623 write_address(RELEASE); | |
| 1624 } | |
| 1625 | |
| 1626 | |
| 1627 void ext_flash_read_block_start(void) | |
| 1628 { | |
| 1629 wait_chip_not_busy(); | |
| 1630 write_spi(0x03,HOLDCS); /* WREN */ | |
| 1631 write_address(HOLDCS); | |
| 1632 } | |
| 1633 | |
| 1634 /* 4KB, 32KB, 64 KB, not the upper 16 MB with 4 Byte address at the moment */ | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1635 static uint8_t ext_flash_erase_if_on_page_start(void) |
| 38 | 1636 { |
| 1637 if(actualAddress < 0x00008000) | |
| 1638 { | |
| 1639 /* 4K Byte is 0x1000 */ | |
| 1640 if((actualAddress & 0xFFF) == 0) | |
| 1641 { | |
| 1642 ext_flash_erase4kB(); | |
| 1643 return 1; | |
| 1644 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1645 } |
| 38 | 1646 else |
| 1647 if(actualAddress < 0x00010000) | |
| 1648 { | |
| 1649 /* 32K Byte is only one page */ | |
| 1650 if(actualAddress == 0x00010000) | |
| 1651 { | |
| 1652 ext_flash_erase32kB(); | |
| 1653 return 1; | |
| 1654 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1655 } |
| 38 | 1656 else |
| 1657 { | |
| 1658 /* 64K Byte is 0x10000 */ | |
| 1659 if((actualAddress & 0xFFFF) == 0) | |
| 1660 { | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1661 if(preparedPageAddress == actualAddress) /* has page already been prepared before? (at the moment for samples only) */ |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1662 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1663 preparedPageAddress = 0; |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1664 |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1665 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1666 else |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1667 { |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1668 ext_flash_erase64kB(); |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1669 } |
| 38 | 1670 return 1; |
| 1671 } | |
|
423
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1672 } |
|
a560afdaadbf
ext_Flash_write_sample erase sector optimization:
ideenmodellierer
parents:
421
diff
changeset
|
1673 |
| 38 | 1674 return 0; |
| 1675 } | |
| 1676 | |
| 1677 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1678 static void ext_flash_read_block(uint8_t *getByte, uint8_t type) |
| 38 | 1679 { |
| 1680 *getByte = read_spi(HOLDCS);/* read data */ | |
| 1681 ext_flash_incf_address(type); | |
| 1682 } | |
| 1683 | |
| 1684 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1685 static void ext_flash_read_block_multi(void *getByte, uint32_t size, uint8_t type) |
| 38 | 1686 { |
| 1687 uint8_t *data; | |
| 1688 data = getByte; | |
| 1689 | |
| 1690 for(uint32_t i=0;i<size;i++) | |
| 1691 { | |
| 1692 data[i] = read_spi(HOLDCS);/* read data */ | |
| 1693 ext_flash_incf_address(type); | |
| 1694 } | |
| 1695 } | |
| 1696 | |
| 1697 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1698 static void ext_flash_read_block_stop(void) |
| 38 | 1699 { |
| 1700 chip_unselect(); | |
| 1701 } | |
| 1702 | |
| 1703 | |
| 1704 /* Private functions ---------------------------------------------------------*/ | |
| 1705 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1706 static void ef_write_block(uint8_t * sendByte, uint32_t length, uint8_t type, uint8_t do_not_erase) |
| 38 | 1707 { |
| 1708 uint32_t remaining_page_size, remaining_length, remaining_space_to_ring_end; | |
| 420 | 1709 uint32_t i=0; |
| 1710 | |
| 38 | 1711 if(!length) |
| 1712 return; | |
| 1713 | |
| 1714 uint32_t ringStart, ringStop; | |
| 1715 | |
| 1716 switch(type) | |
| 1717 { | |
| 1718 case EF_HEADER: | |
| 1719 actualAddress = actualPointerHeader; | |
| 1720 ringStart = HEADERSTART; | |
| 1721 ringStop = HEADERSTOP; | |
| 1722 break; | |
| 1723 case EF_SAMPLE: | |
| 1724 actualAddress = actualPointerSample; | |
| 1725 ringStart = SAMPLESTART; | |
| 1726 ringStop = SAMPLESTOP; | |
| 1727 break; | |
| 1728 case EF_DEVICEDATA: | |
| 1729 actualAddress = actualPointerDevicedata; | |
| 1730 ringStart = DDSTART; | |
| 1731 ringStop = DDSTOP; | |
| 1732 break; | |
| 1733 case EF_VPMDATA: | |
| 1734 actualAddress = actualPointerVPM; | |
| 1735 ringStart = VPMSTART; | |
| 1736 ringStop = VPMSTOP; | |
| 1737 break; | |
| 1738 case EF_SETTINGS: | |
| 1739 actualAddress = actualPointerSettings; | |
| 1740 ringStart = SETTINGSSTART; | |
| 1741 ringStop = SETTINGSSTOP; | |
| 1742 break; | |
| 1743 case EF_FIRMWARE: | |
| 1744 actualAddress = actualPointerFirmware; | |
| 1745 ringStart = FWSTART; | |
| 1746 ringStop = FWSTOP; | |
| 1747 break; | |
| 1748 case EF_FIRMWARE2: | |
| 1749 actualAddress = actualPointerFirmware2; | |
| 1750 ringStart = FWSTART2; | |
| 1751 ringStop = FWSTOP2; | |
| 1752 break; | |
| 1753 default: | |
| 1754 ringStart = FLASHSTART; | |
| 1755 ringStop = FLASHSTOP; | |
| 1756 break; | |
| 1757 } | |
| 1758 /* safety */ | |
| 1759 if(actualAddress < ringStart) | |
| 1760 actualAddress = ringStart; | |
| 1761 | |
| 1762 if(do_not_erase == 0) | |
| 1763 ext_flash_erase_if_on_page_start(); | |
| 1764 | |
| 420 | 1765 while( i<length) |
| 38 | 1766 { |
| 1767 ef_hw_rough_delay_us(5); | |
| 1768 wait_chip_not_busy(); | |
| 1769 write_spi(0x06,RELEASE); /* WREN */ | |
| 1770 write_spi(0x02,HOLDCS); /* write cmd */ | |
| 1771 write_address(HOLDCS); | |
| 1772 | |
| 1773 remaining_length = length - i; | |
| 420 | 1774 remaining_page_size = 0xFF - (uint8_t)(actualAddress & 0xFF) +1; |
| 38 | 1775 remaining_space_to_ring_end = ringStop - actualAddress; |
| 1776 | |
| 420 | 1777 if(remaining_length >= 256) |
| 1778 { | |
| 1779 remaining_length = 255; /* up to 256 bytes may be written in one burst. Last byte is written with release */ | |
| 1780 } | |
| 1781 else | |
| 38 | 1782 { |
| 420 | 1783 remaining_length--; /* last byte needed for release */ |
| 1784 } | |
| 1785 if(remaining_length >= (remaining_page_size) ) /* use 256 byte page and calculate number of bytes left */ | |
| 1786 { | |
| 1787 remaining_length = remaining_page_size - 1; | |
| 1788 } | |
| 1789 if( (remaining_space_to_ring_end >= 256)) | |
| 1790 { | |
| 1791 for(int j=0; j<remaining_length; j++) | |
| 38 | 1792 { |
| 1793 write_spi(sendByte[i],HOLDCS);/* write data */ | |
| 1794 actualAddress++; | |
| 1795 i++; | |
| 1796 } | |
| 1797 } | |
| 1798 /* byte with RELEASE */ | |
| 1799 write_spi(sendByte[i],RELEASE);/* write data */ | |
| 1800 actualAddress++; | |
| 420 | 1801 i++; |
| 1802 | |
| 38 | 1803 if(actualAddress > ringStop) |
| 1804 actualAddress = ringStart; | |
| 420 | 1805 |
| 38 | 1806 if(do_not_erase == 0) |
| 1807 ext_flash_erase_if_on_page_start(); | |
| 1808 } | |
| 1809 switch(type) | |
| 1810 { | |
| 1811 case EF_HEADER: | |
| 1812 actualPointerHeader = actualAddress; | |
| 1813 break; | |
| 1814 case EF_SAMPLE: | |
| 1815 actualPointerSample = actualAddress; | |
| 1816 break; | |
| 1817 case EF_DEVICEDATA: | |
| 1818 actualPointerDevicedata = actualAddress; | |
| 1819 break; | |
| 1820 case EF_VPMDATA: | |
| 1821 actualPointerVPM = actualAddress; | |
| 1822 break; | |
| 1823 case EF_SETTINGS: | |
| 1824 actualPointerSettings = actualAddress; | |
| 1825 break; | |
| 1826 case EF_FIRMWARE: | |
| 1827 actualPointerFirmware = actualAddress; | |
| 1828 break; | |
| 1829 case EF_FIRMWARE2: | |
| 1830 actualPointerFirmware2 = actualAddress; | |
| 1831 break; | |
| 1832 default: | |
| 1833 break; | |
| 1834 } | |
| 1835 } | |
| 1836 | |
| 1837 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1838 static _Bool ext_flash_test_remaining_space_of_page_empty(uint32_t pointer, uint16_t length) |
| 38 | 1839 { |
| 1840 if((pointer & 0xFFF) == 0) | |
| 1841 return 1; | |
| 1842 | |
| 1843 uint32_t backup = actualAddress; | |
| 1844 uint8_t data; | |
| 1845 uint32_t size_to_page_end; | |
| 1846 | |
| 1847 size_to_page_end = 0x1000 - (pointer & 0xFFF); | |
| 1848 if(length > size_to_page_end) | |
| 1849 length = size_to_page_end; | |
| 1850 | |
| 1851 actualAddress = pointer; | |
| 1852 ext_flash_read_block_start(); | |
| 1853 | |
| 1854 for(uint16_t i = 0; i<length; i++) | |
| 1855 { | |
| 1856 ext_flash_read_block(&data, 255); // 255 = ENTIRE FLASH | |
| 1857 if(data != 0xFF) | |
| 1858 { | |
| 1859 ext_flash_read_block_stop(); | |
| 1860 actualAddress = backup; | |
| 1861 return 0; | |
| 1862 } | |
| 1863 } | |
| 1864 ext_flash_read_block_stop(); | |
| 1865 actualAddress = backup; | |
| 1866 return 1; | |
| 1867 } | |
| 1868 | |
| 1869 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1870 static void ext_flash_set_to_begin_of_next_page(uint32_t *pointer, uint8_t type) |
| 38 | 1871 { |
| 1872 uint32_t ringStart, ringStop; | |
| 1873 | |
| 1874 switch(type) | |
| 1875 { | |
| 1876 case EF_HEADER: | |
| 1877 ringStart = HEADERSTART; | |
| 1878 ringStop = HEADERSTOP; | |
| 1879 break; | |
| 1880 case EF_SAMPLE: | |
| 1881 ringStart = SAMPLESTART; | |
| 1882 ringStop = SAMPLESTOP; | |
| 1883 break; | |
| 1884 case EF_DEVICEDATA: | |
| 1885 ringStart = DDSTART; | |
| 1886 ringStop = DDSTOP; | |
| 1887 break; | |
| 1888 case EF_VPMDATA: | |
| 1889 ringStart = VPMSTART; | |
| 1890 ringStop = VPMSTOP; | |
| 1891 break; | |
| 1892 case EF_SETTINGS: | |
| 1893 ringStart = SETTINGSSTART; | |
| 1894 ringStop = SETTINGSSTOP; | |
| 1895 break; | |
| 1896 default: | |
| 1897 ringStart = FLASHSTART; | |
| 1898 ringStop = FLASHSTOP; | |
| 1899 break; | |
| 1900 } | |
| 1901 | |
| 1902 *pointer = (*pointer & 0xFFF) + 0x1000; | |
| 1903 | |
| 1904 if((*pointer < ringStart) || (*pointer >= ringStop)) | |
| 1905 *pointer = ringStart; | |
| 1906 } | |
| 1907 | |
| 1908 | |
| 1909 static void ef_erase_64K(uint32_t blocks) | |
| 1910 { | |
| 1911 for(uint32_t i = 0; i < blocks; i++) | |
| 1912 { | |
| 1913 wait_chip_not_busy(); | |
| 1914 write_spi(0x06,RELEASE);/* WREN */ | |
| 1915 write_spi(0xD8,HOLDCS);/* 64k erase cmd */ | |
| 1916 write_address(RELEASE); | |
| 1917 actualAddress += 0x10000; | |
| 1918 HAL_Delay(25); | |
| 1919 } | |
| 1920 } | |
| 1921 | |
| 1922 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1923 static void chip_unselect(void) |
| 38 | 1924 { |
| 1925 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_SET); // chip select | |
| 1926 } | |
| 1927 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1928 static void chip_select(void) |
| 38 | 1929 { |
| 1930 HAL_GPIO_WritePin(EXTFLASH_CSB_GPIO_PORT,EXTFLASH_CSB_PIN,GPIO_PIN_RESET); // chip select | |
| 1931 } | |
| 1932 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1933 static void error_led_on(void) |
| 38 | 1934 { |
| 1935 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_SET); | |
| 1936 } | |
| 1937 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1938 static void error_led_off(void) |
| 38 | 1939 { |
| 1940 HAL_GPIO_WritePin(OSCILLOSCOPE_GPIO_PORT,OSCILLOSCOPE_PIN,GPIO_PIN_RESET); | |
| 1941 } | |
| 1942 | |
| 1943 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1944 static uint8_t read_spi(uint8_t unselect_CS_afterwards) |
| 38 | 1945 { |
| 1946 uint8_t byte; | |
| 1947 | |
| 1948 chip_select(); | |
| 1949 | |
| 1950 if(HAL_SPI_Receive(&hspiDisplay, &byte, 1, 10000) != HAL_OK) | |
| 1951 Error_Handler_extflash(); | |
| 1952 | |
| 1953 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
| 1954 { | |
| 1955 } | |
| 1956 if(unselect_CS_afterwards) | |
| 1957 chip_unselect(); | |
| 1958 | |
| 1959 return byte; | |
| 1960 } | |
| 1961 | |
| 1962 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1963 static void write_spi(uint8_t data, uint8_t unselect_CS_afterwards) |
| 38 | 1964 { |
| 1965 chip_select(); | |
| 1966 | |
| 1967 if(HAL_SPI_Transmit(&hspiDisplay, &data, 1, 10000) != HAL_OK) | |
| 1968 Error_Handler_extflash(); | |
| 1969 | |
| 1970 while (HAL_SPI_GetState(&hspiDisplay) != HAL_SPI_STATE_READY) | |
| 1971 { | |
| 1972 } | |
| 1973 if(unselect_CS_afterwards) | |
| 1974 chip_unselect(); | |
| 1975 } | |
| 1976 | |
| 1977 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1978 static void write_address(uint8_t unselect_CS_afterwards) |
| 38 | 1979 { |
| 1980 uint8_t hi, med ,lo; | |
| 1981 | |
| 1982 hi = (actualAddress >> 16) & 0xFF; | |
| 1983 med = (actualAddress >> 8) & 0xFF; | |
| 1984 lo = actualAddress & 0xFF; | |
| 1985 | |
| 1986 write_spi(hi, HOLDCS); | |
| 1987 write_spi(med, HOLDCS); | |
| 1988 write_spi(lo, unselect_CS_afterwards); | |
| 1989 } | |
| 1990 | |
| 1991 | |
| 1992 static void wait_chip_not_busy(void) | |
| 1993 { | |
| 1994 uint8_t status; | |
| 1995 | |
| 1996 chip_unselect(); | |
| 1997 | |
| 1998 write_spi(0x05,HOLDCS); /* RDSR */ | |
| 1999 status = read_spi(HOLDCS);/* read status */ | |
| 2000 while(status & 0x01) | |
| 2001 { | |
| 2002 HAL_Delay(1); | |
| 2003 status = read_spi(HOLDCS);/* read status */ | |
| 2004 } | |
| 2005 chip_unselect(); | |
| 2006 } | |
| 2007 | |
| 2008 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2009 static void ext_flash_incf_address(uint8_t type) |
| 38 | 2010 { |
| 2011 uint32_t ringStart, ringStop; | |
| 2012 | |
| 2013 actualAddress += 1; | |
| 2014 | |
| 2015 switch(type) | |
| 2016 { | |
| 2017 case EF_HEADER: | |
| 2018 ringStart = HEADERSTART; | |
| 2019 ringStop = HEADERSTOP; | |
| 2020 break; | |
| 2021 case EF_SAMPLE: | |
| 2022 ringStart = SAMPLESTART; | |
| 2023 ringStop = SAMPLESTOP; | |
| 2024 break; | |
| 2025 case EF_DEVICEDATA: | |
| 2026 ringStart = DDSTART; | |
| 2027 ringStop = DDSTOP; | |
| 2028 break; | |
| 2029 case EF_VPMDATA: | |
| 2030 ringStart = VPMSTART; | |
| 2031 ringStop = VPMSTOP; | |
| 2032 break; | |
| 2033 case EF_SETTINGS: | |
| 2034 ringStart = SETTINGSSTART; | |
| 2035 ringStop = SETTINGSSTOP; | |
| 2036 break; | |
| 2037 case EF_FIRMWARE: | |
| 2038 ringStart = FWSTART; | |
| 2039 ringStop = FWSTOP; | |
| 2040 break; | |
| 2041 case EF_FIRMWARE2: | |
| 2042 ringStart = FWSTART2; | |
| 2043 ringStop = FWSTOP2; | |
| 2044 break; | |
| 2045 default: | |
| 2046 ringStart = FLASHSTART; | |
| 2047 ringStop = FLASHSTOP; | |
| 2048 break; | |
| 2049 } | |
| 2050 | |
| 2051 if((actualAddress < ringStart) || (actualAddress > ringStop)) | |
| 2052 actualAddress = ringStart; | |
| 2053 } | |
| 2054 | |
| 2055 | |
|
268
1b9847d40e81
cleanup: make things static where possible.
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
2056 static void ext_flash_decf_address_ring(uint8_t type) |
| 38 | 2057 { |
| 2058 uint32_t ringStart, ringStop; | |
| 2059 | |
| 2060 switch(type) | |
| 2061 { | |
| 2062 case EF_HEADER: | |
| 2063 ringStart = HEADERSTART; | |
| 2064 ringStop = HEADERSTOP; | |
| 2065 break; | |
| 2066 case EF_SAMPLE: | |
| 2067 ringStart = SAMPLESTART; | |
| 2068 ringStop = SAMPLESTOP; | |
| 2069 break; | |
| 2070 case EF_DEVICEDATA: | |
| 2071 ringStart = DDSTART; | |
| 2072 ringStop = DDSTOP; | |
| 2073 break; | |
| 2074 case EF_VPMDATA: | |
| 2075 ringStart = VPMSTART; | |
| 2076 ringStop = VPMSTOP; | |
| 2077 break; | |
| 2078 case EF_SETTINGS: | |
| 2079 ringStart = SETTINGSSTART; | |
| 2080 ringStop = SETTINGSSTOP; | |
| 2081 break; | |
| 2082 case EF_FIRMWARE: | |
| 2083 ringStart = FWSTART; | |
| 2084 ringStop = FWSTOP; | |
| 2085 break; | |
| 2086 case EF_FIRMWARE2: | |
| 2087 ringStart = FWSTART2; | |
| 2088 ringStop = FWSTOP2; | |
| 2089 break; | |
| 2090 default: | |
| 2091 ringStart = FLASHSTART; | |
| 2092 ringStop = FLASHSTOP; | |
| 2093 break; | |
| 2094 } | |
| 2095 | |
| 2096 if((actualAddress <= ringStart) || (actualAddress > ringStop)) | |
| 2097 actualAddress = ringStop; | |
| 2098 else | |
| 2099 actualAddress -= 1; | |
| 2100 } | |
| 2101 | |
| 2102 | |
| 2103 static void ef_hw_rough_delay_us(uint32_t delayUs) | |
| 2104 { | |
| 2105 if(!delayUs) | |
| 2106 return; | |
| 2107 delayUs*= 12; | |
| 2108 while(delayUs--); | |
| 2109 return; | |
| 2110 } | |
| 2111 | |
| 2112 static void Error_Handler_extflash(void) | |
| 2113 { | |
| 2114 while(1) | |
| 2115 { | |
| 2116 } | |
| 2117 } | |
|
425
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2118 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2119 void ext_flash_CloseSector(void) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2120 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2121 uint32_t actualAddressBackup = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2122 int i=0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2123 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2124 if(closeSectorAddress != 0) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2125 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2126 /* write some dummy bytes to the sector which is currently used for storing samples. This is done to "hide" problem if function is calles again */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2127 actualAddress = closeSectorAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2128 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2129 wait_chip_not_busy(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2130 write_spi(0x06,RELEASE); /* WREN */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2131 write_spi(0x02,HOLDCS); /* write cmd */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2132 write_address(HOLDCS); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2133 for(i = 0; i<8; i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2134 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2135 write_spi(0xA5,HOLDCS);/* write data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2136 actualAddress++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2137 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2138 /* byte with RELEASE */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2139 write_spi(0xA5,RELEASE);/* write data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2140 actualAddress = actualAddressBackup; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2141 closeSectorAddress = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2142 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2143 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2144 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2145 uint32_t ext_flash_AnalyseSampleBuffer(char *pstrResult) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2146 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2147 uint8_t sectorState[16]; /* samples are stored in 16 sector / 64k each */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2148 uint32_t curAddress = SAMPLESTART; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2149 uint8_t curSector = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2150 uint8_t samplebuffer[10]; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2151 uint32_t actualAddressBackup = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2152 uint8_t emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2153 uint32_t i = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2154 uint8_t startedSectors = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2155 uint8_t lastSectorInuse = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2156 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2157 /* check if a sector is used till its end */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2158 for(curSector = 0; curSector < 16; curSector++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2159 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2160 sectorState[curSector] = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2161 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2162 curAddress = SAMPLESTART + (curSector * 0x10000); /* set address to begin of sector and check if it is used */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2163 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2164 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2165 for(uint32_t i=0;i<10;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2166 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2167 samplebuffer[i] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2168 if(samplebuffer[i] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2169 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2170 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2171 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2172 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2173 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2174 if(emptyCellCnt == 10) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2175 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2176 sectorState[curSector] = SECTOR_NOTUSED; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2177 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2178 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2179 curAddress = SAMPLESTART + (curSector * 0x10000) + 0xFFF5; /* set address to end of sector and check if it is used */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2180 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2181 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2182 for(i=0;i<10;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2183 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2184 samplebuffer[i] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2185 if(samplebuffer[i] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2186 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2187 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2188 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2189 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2190 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2191 if(emptyCellCnt == 10) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2192 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2193 sectorState[curSector] |= SECTOR_INUSE; /* will become SECTOR_EMPTY if start is NOTUSED */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2194 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2195 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2196 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2197 for(i=0;i<16;i++) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2198 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2199 if( sectorState[i] == SECTOR_INUSE) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2200 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2201 startedSectors++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2202 lastSectorInuse = i; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2203 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2204 *(pstrResult+i) = sectorState[i] + 48; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2205 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2206 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2207 if(startedSectors > 1) /* more than one sector is in used => ring buffer corrupted */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2208 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2209 if(startedSectors == 2) /* only fix issue if only two sectors are in used. Otherwise fixing will cause more worries than help */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2210 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2211 /* the logic behind healing of the problem is that the larger address is the oldest one => restore the largest address */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2212 curAddress = SAMPLESTART + (lastSectorInuse * 0x10000); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2213 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2214 actualAddress = curAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2215 ext_flash_read_block_start(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2216 while((emptyCellCnt < 10) && (actualAddress < curAddress + 0x10000)) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2217 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2218 samplebuffer[0] = read_spi(HOLDCS);/* read data */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2219 if(samplebuffer[0] == 0xFF) |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2220 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2221 emptyCellCnt++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2222 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2223 else |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2224 { |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2225 emptyCellCnt = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2226 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2227 actualAddress++; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2228 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2229 ext_flash_read_block_stop(); |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2230 actualAddress -= 10; /* step 10 bytes back to the start of free bytes */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2231 actualPointerSample = actualAddress; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2232 |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2233 closeSectorAddress = settingsGetPointer()->logFlashNextSampleStartAddress & 0xFFFF0000; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2234 closeSectorAddress += 0xFFF5; /* to be used once next time a dive is logged. Needed because NextSampleID is derived at every startup */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2235 settingsGetPointer()->logFlashNextSampleStartAddress = actualPointerSample; /* store new position to be used for next dive */ |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2236 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2237 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2238 actualAddress = actualAddressBackup; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2239 *(pstrResult+i) = 0; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2240 return startedSectors; |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2241 } |
|
86fcac4cc43a
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
423
diff
changeset
|
2242 |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2243 /* |
| 38 | 2244 uint8_t ext_flash_erase_firmware_if_not_empty(void) |
| 2245 { | |
| 2246 const uint8_t TESTSIZE_FW = 4; | |
| 2247 | |
| 2248 uint8_t data[TESTSIZE_FW]; | |
| 2249 uint8_t notEmpty = 0; | |
| 2250 | |
| 2251 actualAddress = FWSTART; | |
| 2252 ext_flash_read_block_start(); | |
| 2253 for(int i = 0; i < TESTSIZE_FW; i++) | |
| 2254 { | |
| 2255 ext_flash_read_block(&data[i], EF_FIRMWARE); | |
| 2256 if(data[i] != 0xFF) | |
| 2257 notEmpty = 1; | |
| 2258 } | |
| 2259 ext_flash_read_block_stop(); | |
| 2260 | |
| 2261 if(notEmpty) | |
| 2262 { | |
| 2263 ext_flash_erase_firmware(); | |
| 2264 return 1; | |
| 2265 } | |
| 2266 else | |
| 2267 return 0; | |
| 2268 } | |
| 2269 | |
| 2270 uint8_t ext_flash_erase_firmware2_if_not_empty(void) | |
| 2271 { | |
| 2272 const uint8_t TESTSIZE_FW = 4; | |
| 2273 | |
| 2274 uint8_t data[TESTSIZE_FW]; | |
| 2275 uint8_t notEmpty = 0; | |
| 2276 | |
| 2277 actualAddress = FWSTART2; | |
| 2278 ext_flash_read_block_start(); | |
| 2279 for(int i = 0; i < TESTSIZE_FW; i++) | |
| 2280 { | |
| 2281 ext_flash_read_block(&data[i], EF_FIRMWARE2); | |
| 2282 if(data[i] != 0xFF) | |
| 2283 notEmpty = 1; | |
| 2284 } | |
| 2285 ext_flash_read_block_stop(); | |
| 2286 | |
| 2287 if(notEmpty) | |
| 2288 { | |
| 2289 ext_flash_erase_firmware2(); | |
| 2290 return 1; | |
| 2291 } | |
| 2292 else | |
| 2293 return 0; | |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
38
diff
changeset
|
2294 }*/ |