Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 136:6ae8ba5683d6 FlipDisplay
Introduces abort of communication in case of a out of sync DMA transfer
| author | Ideenmodellierer |
|---|---|
| date | Tue, 19 Feb 2019 18:20:45 +0100 |
| parents | b7689d9e888a |
| children | e1d66bc78f9a |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 59 | |
| 60 /* Private types -------------------------------------------------------------*/ | |
| 61 | |
| 62 #define NUM_GASES 5 | |
| 63 | |
| 64 #define LOGBOOK_VERSION (0x30) | |
| 65 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 66 | |
| 67 typedef struct /* don't forget to adjust void clear_divisor(void) */ | |
| 68 { | |
| 69 uint8_t temperature; | |
| 70 uint8_t deco_ndl; | |
| 71 uint8_t gradientFactor; | |
| 72 uint8_t ppo2; | |
| 73 uint8_t decoplan; | |
| 74 uint8_t cns; | |
| 75 uint8_t tank; | |
| 76 } SDivisor; | |
| 77 | |
| 78 /* Exported variables --------------------------------------------------------*/ | |
| 79 | |
| 80 /* Private variables ---------------------------------------------------------*/ | |
| 81 uint8_t data_store[10000]; | |
| 82 SLogbookHeader header; | |
| 83 SLogbookHeaderOSTC3 headerOSTC3; | |
| 84 SLogbookHeaderOSTC3compact headerOSTC3compact; | |
| 85 SSmallHeader smallHeader; | |
| 86 SDivisor divisor; | |
| 87 SDivisor divisorBackup; | |
| 88 | |
| 89 /* Private function prototypes -----------------------------------------------*/ | |
| 90 void clear_divisor(void); | |
| 91 void logbook_SetAverageDepth(float average_depth_meter); | |
| 92 void logbook_SetMinTemperature(float min_temperature_celsius); | |
| 93 void logbook_SetMaxCNS(float max_cns_percentage); | |
| 94 void logbook_SetCompartmentDesaturation(void); | |
| 95 void logbook_SetLastStop(float last_stop_depth_bar); | |
| 96 void logbook_writedata(void * data, int length_byte); | |
| 97 void logbook_UpdateHeader(void); | |
| 98 | |
| 99 /* Exported functions --------------------------------------------------------*/ | |
| 100 | |
| 101 /** used by test_vpm.c at the moment */ | |
| 102 void logbook_EndDive(void) | |
| 103 { | |
| 104 ext_flash_close_new_dive_log((uint8_t*) &header); | |
| 105 } | |
| 106 | |
| 107 | |
| 108 // =============================================================================== | |
| 109 // logbook_last_totalDiveCount | |
| 110 /// @brief Fix setting issues | |
| 111 /// @date 04-April-2016 | |
| 112 /// | |
| 113 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 114 // =============================================================================== | |
| 115 uint16_t logbook_lastDive_diveNumber(void) | |
| 116 { | |
| 117 SLogbookHeader tempLogbookHeader; | |
| 118 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 119 { | |
| 120 return tempLogbookHeader.diveNumber; | |
| 121 } | |
| 122 else | |
| 123 { | |
| 124 return 0; | |
| 125 } | |
| 126 } | |
| 127 | |
| 128 | |
| 129 /** | |
| 130 ****************************************************************************** | |
| 131 * @brief logbook_getCurrentHeader. / | |
| 132 * @author Peter Ryser | |
| 133 * @version V0.0.1 | |
| 134 * @date 22-April-2014 | |
| 135 ****************************************************************************** | |
| 136 * | |
| 137 * @return SLogbookHeader*: | |
| 138 */ | |
| 139 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 140 { | |
| 141 return &header; | |
| 142 } | |
| 143 | |
| 144 /** | |
| 145 ****************************************************************************** | |
| 146 * @brief logbook_getHeaderOSTC3. / | |
| 147 * @author heinrichs weikamp gmbh | |
| 148 * @version V0.0.1 | |
| 149 * @date 26-Nov-2014 | |
| 150 ****************************************************************************** | |
| 151 * | |
| 152 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 153 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 154 * @return uint8_t : 1 = success | |
| 155 */ | |
| 156 /* | |
| 157 SLogbookHeaderOSTC3 * logbook_getHeaderOSTC3(uint8_t StepBackwards) | |
| 158 { | |
| 159 if(!logbook_getHeader(StepBackwards, &header)) | |
| 160 return 0; | |
| 161 else | |
| 162 { | |
| 163 logbook_build_ostc3header(); | |
| 164 return &headerOSTC3; | |
| 165 } | |
| 166 } | |
| 167 */ | |
| 168 | |
| 169 /** | |
| 170 ****************************************************************************** | |
| 171 * @brief logbook_getNumberOfHeaders. / | |
| 172 * @author heinrichs weikamp gmbh | |
| 173 * @version V0.0.1 | |
| 174 * @date 18-May-2016 | |
| 175 ****************************************************************************** | |
| 176 * | |
| 177 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 178 */ | |
| 179 uint8_t logbook_getNumberOfHeaders(void) | |
| 180 { | |
| 181 return ext_flash_count_dive_headers(); | |
| 182 } | |
| 183 | |
| 184 | |
| 185 /** | |
| 186 ****************************************************************************** | |
| 187 * @brief logbook_getHeader. / | |
| 188 * @author Peter Ryser | |
| 189 * @version V0.0.1 | |
| 190 * @date 22-April-2014 | |
| 191 ****************************************************************************** | |
| 192 * | |
| 193 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 194 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 195 * @return uint8_t : 1 = success | |
| 196 */ | |
| 197 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 198 { | |
| 199 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 200 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 201 return 0; | |
| 202 else | |
| 203 return 1; | |
| 204 } | |
| 205 | |
| 206 /** | |
| 207 ****************************************************************************** | |
| 208 * @brief logbook_initNewdiveProfile. / | |
| 209 * creates header and smallHeader from diveState and global Settings | |
| 210 * and writes new lookboock entry on flash device | |
| 211 * diveState | |
| 212 * @author Peter Ryser | |
| 213 * @version V0.0.1 | |
| 214 * @date 22-April-2014 | |
| 215 ****************************************************************************** | |
| 216 * | |
| 217 * @param SDiveState* pInfo: Input | |
| 218 * @param SSettings* pSettings: Input | |
| 219 */ | |
| 220 | |
| 221 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 222 { | |
| 223 RTC_DateTypeDef Sdate; | |
| 224 RTC_TimeTypeDef Stime; | |
| 225 | |
| 226 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 227 { | |
| 228 ((uint8_t*)(&header))[i] = 0; | |
| 229 } | |
| 230 header.diveHeaderStart = 0xFAFA; | |
| 231 header.diveHeaderEnd = 0xFBFB; | |
| 232 header.samplingRate = 2; | |
| 233 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) | |
| 234 { | |
| 235 for(int i = 0; i < 5; i++) | |
| 236 { | |
| 237 header.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; | |
| 238 header.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; | |
| 239 header.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; | |
| 240 header.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; | |
| 241 } | |
| 242 } | |
| 243 else | |
| 244 { | |
| 245 for(int i = 0; i < 5; i++) | |
| 246 { | |
| 247 header.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; | |
| 248 header.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; | |
| 249 header.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; | |
| 250 header.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; | |
| 251 } | |
| 252 | |
| 253 for(int i = 0; i < 5; i++) | |
| 254 { | |
| 255 header.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; | |
| 256 header.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; | |
| 257 } | |
| 258 } | |
| 259 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 260 | |
| 261 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 262 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
| 263 header.dateYear = Sdate.Year; | |
| 264 header.dateMonth = Sdate.Month; | |
| 265 header.dateDay = Sdate.Date; | |
| 266 header.timeHour = Stime.Hours; | |
| 267 header.timeMinute = Stime.Minutes; | |
| 268 header.cnsAtBeginning = (uint16_t)((pInfo->lifeData.cns * 100) + 0.5f); | |
| 269 header.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); | |
| 270 header.firmwareVersionHigh = firmwareVersion_16bit_high(); | |
| 271 header.firmwareVersionLow = firmwareVersion_16bit_low(); | |
| 272 header.logbookProfileVersion = LOGBOOK_VERSION; | |
| 273 header.salinity = pSettings->salinity; | |
| 274 header.diveNumber = pSettings->totalDiveCounter; | |
| 275 header.personalDiveCount = pSettings->personalDiveCount; | |
| 276 | |
| 277 header.diveMode = pInfo->diveSettings.diveMode; | |
| 278 header.CCRmode = pInfo->diveSettings.CCR_Mode; | |
| 279 header.lastDecostop_m = pSettings->last_stop_depth_meter; | |
| 280 | |
| 281 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 282 { | |
| 283 header.decoModel = 1; | |
| 284 header.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; | |
| 285 header.gfHigh = pInfo->diveSettings.gf_high; | |
| 286 } | |
| 287 else | |
| 288 { | |
| 289 header.decoModel = 2; | |
| 290 header.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; | |
| 291 header.gfHigh = 0; | |
| 292 } | |
| 293 | |
| 294 memcpy(header.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); | |
| 295 memcpy(header.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); | |
| 296 | |
| 297 logbook_SetCompartmentDesaturation(); | |
| 298 | |
| 299 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&header); | |
| 300 | |
| 301 smallHeader.profileLength[0] = 0xFF; | |
| 302 smallHeader.profileLength[1] = 0xFF; | |
| 303 smallHeader.profileLength[2] = 0xFF; | |
| 304 smallHeader.samplingRate_seconds = 2; | |
| 305 smallHeader.numDivisors = 7; | |
| 306 | |
| 307 smallHeader.tempType = 0; | |
| 308 smallHeader.tempLength = 2; | |
| 309 smallHeader.tempDivisor = 6; | |
| 310 | |
| 311 smallHeader.deco_ndlType = 1; | |
| 312 smallHeader.deco_ndlLength = 2; | |
| 313 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 314 | |
| 315 /* GF in % at actual position */ | |
| 316 smallHeader.gfType = 2; | |
| 317 smallHeader.gfLength = 1; | |
| 318 smallHeader.gfDivisor = 0; //12; | |
| 319 | |
| 320 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 321 smallHeader.ppo2Type = 3; | |
| 322 smallHeader.ppo2Length = 9; | |
| 323 smallHeader.ppo2Divisor = 2; //2 | |
| 324 | |
| 325 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 326 /* last stop depth is defined in header */ | |
| 327 smallHeader.decoplanType = 4; | |
| 328 smallHeader.decoplanLength = 15; | |
| 329 smallHeader.decoplanDivisor = 12;//12; | |
| 330 | |
| 331 smallHeader.cnsType = 5; | |
| 332 smallHeader.cnsLength = 2; | |
| 333 smallHeader.cnsDivisor = 12; | |
| 334 | |
| 335 smallHeader.tankType = 6; | |
| 336 smallHeader.tankLength = 0; | |
| 337 smallHeader.tankDivisor = 0; | |
| 338 | |
| 339 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); | |
| 340 | |
| 341 clear_divisor(); | |
| 342 } | |
| 343 | |
| 344 /** | |
| 345 ****************************************************************************** | |
| 346 * @brief clear_divisor / clears divisor struct | |
| 347 * @author Peter Ryser | |
| 348 * @version V0.0.1 | |
| 349 * @date 22-April-2014 | |
| 350 ****************************************************************************** | |
| 351 * | |
| 352 */ | |
| 353 void clear_divisor(void) | |
| 354 { | |
| 355 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 356 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 357 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 358 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 359 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 360 divisor.tank = smallHeader.tankDivisor - 1; | |
| 361 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 362 } | |
| 363 | |
| 364 | |
| 365 /** | |
| 366 ****************************************************************************** | |
| 367 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 368 * @author Peter Ryser | |
| 369 * @version V0.0.1 | |
| 370 * @date 22-April-2014 | |
| 371 ****************************************************************************** | |
| 372 * | |
| 373 * @param uint8_t *pos: Output 8 bit array | |
| 374 * @param uint16_t var: 16 bit variable | |
| 375 */ | |
| 376 void addU16(uint8_t *pos, uint16_t var) | |
| 377 { | |
| 378 *((uint16_t*)pos) = var; | |
| 379 } | |
| 380 | |
| 381 void addS16(uint8_t *pos, int16_t var) | |
| 382 { | |
| 383 *((int16_t*)pos) = var; | |
| 384 } | |
| 385 | |
| 386 /** | |
| 387 ****************************************************************************** | |
| 388 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 389 * @author Peter Ryser | |
| 390 * @date 22-April-2014 | |
| 391 * @version V0.0.2 | |
| 392 * @since 20-June-2016 | |
| 393 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 394 | |
| 395 | |
| 396 ****************************************************************************** | |
| 397 * | |
| 398 * @param SDiveState state: | |
| 399 */ | |
| 400 | |
| 401 void logbook_writeSample(SDiveState state) | |
| 402 { | |
| 403 uint8_t sample[256]; | |
| 404 // int position = 0; | |
| 405 int length = 0; | |
| 406 // _Bool bEvent = 0; | |
| 407 uint8_t nextstopDepthMeter = 0; | |
| 408 uint16_t nextstopLengthSeconds = 0; | |
| 409 uint8_t nextstopLengthMinutes = 0; | |
| 410 bit8_Type eventByte1, eventByte2; | |
| 411 bit8_Type profileByteFlag; | |
| 412 int i = 0; | |
| 413 for(i = 0; i <256 ;i++) | |
| 414 sample[i] = 0; | |
| 415 addU16(sample, (uint16_t)(state.lifeData.depth_meter * 100)); | |
| 416 length += 2; | |
| 417 sample[2] = 0; | |
| 418 length++; | |
| 419 eventByte1.uw = 0; | |
| 420 eventByte2.uw = 0; | |
| 421 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
422 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 423 |
| 424 //BuildEevntyte 1 | |
| 425 // sub old 0-3 only one at a time | |
| 426 if(state.events.manualMarker) | |
| 427 { | |
| 428 eventByte1.uw = 6; | |
| 429 } | |
| 430 else | |
| 431 if(state.warnings.decoMissed) | |
| 432 { | |
| 433 eventByte1.uw = 2; | |
| 434 } | |
| 435 else | |
| 436 if(state.warnings.ppO2Low) | |
| 437 { | |
| 438 eventByte1.uw = 4; | |
| 439 } | |
| 440 else | |
| 441 if(state.warnings.ppO2High) | |
| 442 { | |
| 443 eventByte1.uw = 5; | |
| 444 } | |
| 445 else | |
| 446 if(state.warnings.lowBattery) | |
| 447 { | |
| 448 eventByte1.uw = 7; | |
| 449 } | |
| 450 else | |
| 451 if(state.warnings.slowWarning) | |
| 452 { | |
| 453 eventByte1.uw = 1; | |
| 454 } | |
| 455 // sub bit 4 to 7 | |
| 456 if(state.events.manuelGasSet) | |
| 457 { | |
| 458 eventByte1.ub.bit4 = 1; | |
| 459 } | |
| 460 if(state.events.gasChange) | |
| 461 { | |
| 462 eventByte1.ub.bit5 = 1; | |
| 463 } | |
| 464 if(state.events.setpointChange) | |
| 465 { | |
| 466 eventByte1.ub.bit6 = 1; | |
| 467 } | |
| 468 // sub bit 7 + eventbyte2 | |
| 469 if(state.events.bailout) | |
| 470 { | |
| 471 eventByte1.ub.bit7 = 1; | |
| 472 eventByte2.ub.bit0 = 1; | |
| 473 } | |
| 474 //Add EventByte 1 | |
| 475 if(eventByte1.uw > 0) | |
| 476 { | |
| 477 sample[length] = eventByte1.uw; | |
| 478 length++; | |
| 479 } | |
| 480 if(eventByte2.uw > 0) | |
| 481 { | |
| 482 sample[length] = eventByte2.uw; | |
| 483 length++; | |
| 484 } | |
| 485 //Add EventInfos | |
| 486 if(state.events.manuelGasSet) | |
| 487 { | |
| 488 //manual gas in %O2 & %He | |
| 489 sample[length] = state.events.info_manuelGasSetO2; | |
| 490 length += 1; | |
| 491 sample[length] = state.events.info_manuelGasSetHe; | |
| 492 length += 1; | |
| 493 } | |
| 494 if(state.events.gasChange) | |
| 495 { | |
| 496 //Current gas (gasid) | |
| 497 sample[length] = state.events.info_GasChange; | |
| 498 length += 1; | |
| 499 } | |
| 500 if(state.events.setpointChange) | |
| 501 { | |
| 502 //New setpoint in cbar | |
| 503 sample[length] = state.events.info_SetpointChange; | |
| 504 length += 1; | |
| 505 } | |
| 506 if(state.events.bailout) | |
| 507 { | |
| 508 //bailout gas in % O2 & %He | |
| 509 sample[length] = state.events.info_bailoutO2; | |
| 510 length += 1; | |
| 511 sample[length] = state.events.info_bailoutHe; | |
| 512 length += 1; | |
| 513 } | |
| 514 | |
| 515 | |
| 516 if(divisor.temperature == 0) | |
| 517 { | |
| 518 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 519 addS16(&sample[length], (int16_t)((state.lifeData.temperature_celsius * 10.0f) + 0.5f)); | |
| 520 length += 2; | |
| 521 } | |
| 522 else | |
| 523 { | |
| 524 divisor.temperature--; | |
| 525 } | |
| 526 | |
| 527 | |
| 528 if(smallHeader.deco_ndlDivisor > 0) | |
| 529 { | |
| 530 if(divisor.deco_ndl == 0) | |
| 531 { | |
| 532 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 533 | |
| 534 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 535 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 536 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 537 pDecoinfo = &stateUsed->decolistVPM; | |
| 538 else // should not happen as only GF and VPM at the moment | |
| 539 { | |
| 540 sample[length] = 0; | |
| 541 length += 1; | |
| 542 sample[length] = 0; | |
| 543 length += 1; | |
| 544 } | |
| 545 | |
| 546 if(pDecoinfo->output_ndl_seconds > 0) | |
| 547 { | |
| 548 sample[length] = 0; | |
| 549 length += 1; | |
| 550 sample[length] = (uint8_t)pDecoinfo->output_ndl_seconds / 60; | |
| 551 length += 1; | |
| 552 } | |
| 553 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 554 { | |
| 555 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 556 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 557 | |
| 558 sample[length] = nextstopDepthMeter; | |
| 559 length += 1; | |
| 560 sample[length] = nextstopLengthMinutes; | |
| 561 length += 1; | |
| 562 } | |
| 563 else | |
| 564 { | |
| 565 sample[length] = 0; | |
| 566 length += 1; | |
| 567 sample[length] = 0; | |
| 568 length += 1; | |
| 569 } | |
| 570 } | |
| 571 else | |
| 572 { | |
| 573 divisor.deco_ndl --; | |
| 574 } | |
| 575 } | |
| 576 | |
| 577 | |
| 578 if(smallHeader.ppo2Divisor) | |
| 579 { | |
| 580 if(divisor.ppo2 == 0) | |
| 581 { | |
| 582 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 583 | |
| 584 for(int i = 0; i <3; i++) | |
| 585 { | |
| 586 sample[length] = (uint8_t)(state.lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); | |
| 587 length += 1; | |
| 588 addU16(&sample[length], (uint16_t)(state.lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); | |
| 589 length += 2; | |
| 590 } | |
| 591 } | |
| 592 else | |
| 593 { | |
| 594 divisor.ppo2--; | |
| 595 } | |
| 596 } | |
| 597 | |
| 598 | |
| 599 if(smallHeader.decoplanDivisor) | |
| 600 { | |
| 601 if(divisor.decoplan == 0) | |
| 602 { | |
| 603 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 604 if(state.diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 605 { | |
| 606 for(int i = 0; i <15; i++) | |
| 607 { | |
| 608 sample[length] = state.decolistVPM.output_stop_length_seconds[i] / 60; | |
| 609 length += 1; | |
| 610 } | |
| 611 } | |
| 612 else if(state.diveSettings.deco_type.ub.standard == GF_MODE) | |
| 613 { | |
| 614 for(int i = 0; i <15; i++) | |
| 615 { | |
| 616 sample[length] = state.decolistBuehlmann.output_stop_length_seconds[i] / 60; | |
| 617 length += 1; | |
| 618 } | |
| 619 } | |
| 620 else | |
| 621 { | |
| 622 for(int i = 0; i <15; i++) | |
| 623 { | |
| 624 sample[length] = 0; | |
| 625 length += 1; | |
| 626 } | |
| 627 } | |
| 628 // add16(&sample[length], state.temperature); | |
| 629 //length += 2; | |
| 630 } | |
| 631 else | |
| 632 { | |
| 633 divisor.decoplan --; | |
| 634 } | |
| 635 } | |
| 636 if(divisor.cns == 0) | |
| 637 { | |
| 638 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 639 //addU16(&sample[length], (uint16_t)(state.lifeData.cns * 100.0f + 0.5f)); | |
| 640 addU16(&sample[length], (uint16_t)(state.lifeData.cns)); // hw 151110 cns is 0 to 100 % and more (not 0 to 1.00 and more) | |
| 641 length += 2; | |
| 642 } | |
| 643 else | |
| 644 { | |
| 645 divisor.cns--; | |
| 646 } | |
| 647 | |
| 648 profileByteFlag.uw = length - 3; | |
| 649 if(eventByte1.uw) | |
| 650 { | |
| 651 profileByteFlag.ub.bit7 = 1; | |
| 652 } | |
| 653 sample[2] = profileByteFlag.uw; | |
| 654 logbook_writedata((void *) sample,length); | |
| 655 | |
| 656 } | |
| 657 | |
| 658 | |
| 659 | |
| 660 uint16_t actual_depth1; | |
| 661 uint16_t actual_depth2; | |
| 662 uint16_t actual_length1; | |
| 663 uint16_t actual_length2; | |
| 664 uint16_t actual_inum; | |
| 665 | |
| 666 /** | |
| 667 ****************************************************************************** | |
| 668 * @brief readSample. / Reads data of one logbook sample | |
| 669 * @author Peter Ryser | |
| 670 * @version V0.0.1 | |
| 671 * @date 22-April-2014 | |
| 672 ****************************************************************************** | |
| 673 * | |
| 674 * @param int32_t* depth: output Value | |
| 675 * @param int16_t * gasid: output Value | |
| 676 * @param int32_t* temperature: output Value | |
| 677 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 678 * @param int32_t* cns: output Value | |
| 679 * @return bytes read / 0 = reading Error | |
| 680 */ | |
| 681 uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth) | |
| 682 { | |
| 683 int length = 0; | |
| 684 _Bool bEvent = 0; | |
| 685 bit8_Type eventByte1, eventByte2; | |
| 686 bit8_Type profileByteFlag; | |
| 687 | |
| 688 eventByte1.uw = 0; | |
| 689 eventByte2.uw = 0; | |
| 690 uint8_t tempU8 = 0; | |
| 691 uint16_t temp = 0; | |
| 692 uint16_t bytesRead = 0; | |
| 693 | |
| 694 if(gasid) | |
| 695 *gasid = -1; | |
| 696 if(temperature) | |
| 697 *temperature = -1000; | |
| 698 if(sensor1) | |
| 699 *sensor1 = -1; | |
| 700 if(sensor2) | |
| 701 *sensor2 = -1; | |
| 702 if(sensor3) | |
| 703 *sensor3 = -1; | |
| 704 if(cns) | |
| 705 *cns = -1; | |
| 706 if(setpoint_cbar) | |
| 707 *setpoint_cbar = -1; | |
| 708 if(bailout) | |
| 709 *bailout = -1; | |
| 710 if(manualGas) | |
| 711 { | |
| 712 manualGas->percentageO2 =-1; | |
| 713 manualGas->percentageHe =-1; | |
| 714 } | |
| 715 if(decostopDepth) | |
| 716 *decostopDepth = -1; | |
| 717 | |
| 718 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 719 if(depth) | |
| 720 *depth = (int32_t)temp; | |
| 721 bytesRead += 2; | |
| 722 | |
| 723 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 724 bytesRead ++; | |
| 725 | |
| 726 bEvent = profileByteFlag.ub.bit7; | |
| 727 profileByteFlag.ub.bit7 = 0; | |
| 728 length = profileByteFlag.uw; | |
| 729 | |
| 730 if(bEvent) | |
| 731 { | |
| 732 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 733 bytesRead ++; | |
| 734 | |
| 735 length--; | |
| 736 | |
| 737 //second event byte | |
| 738 if(eventByte1.ub.bit7) | |
| 739 { | |
| 740 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 741 bytesRead ++; | |
| 742 length--; | |
| 743 } | |
| 744 else | |
| 745 { | |
| 746 eventByte2.uw = 0; | |
| 747 } | |
| 748 | |
| 749 //manual Gas Set | |
| 750 if( eventByte1.ub.bit4) | |
| 751 { | |
| 752 //Evaluate manual Gas | |
| 753 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 754 bytesRead +=1; | |
| 755 length -= 1; | |
| 756 manualGas->percentageO2 = tempU8; | |
| 757 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 758 bytesRead +=1; | |
| 759 length -= 1; | |
| 760 manualGas->percentageHe = tempU8; | |
| 761 if(gasid) | |
| 762 *gasid = 0; | |
| 763 } | |
| 764 //gas change | |
| 765 if( eventByte1.ub.bit5) | |
| 766 { | |
| 767 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 768 bytesRead +=1; | |
| 769 length -= 1; | |
| 770 if(gasid) | |
| 771 *gasid = (uint16_t)tempU8; | |
| 772 } | |
| 773 //SetpointChange | |
| 774 if( eventByte1.ub.bit6) | |
| 775 { | |
| 776 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 777 *setpoint_cbar = tempU8; | |
| 778 bytesRead +=1; | |
| 779 length -= 1; | |
| 780 } | |
| 781 | |
| 782 // second event Byte | |
| 783 //bailout | |
| 784 if(eventByte2.ub.bit1) | |
| 785 { | |
| 786 //evaluate bailout gas Gas | |
| 787 *bailout = 1; | |
| 788 | |
| 789 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 790 bytesRead +=1; | |
| 791 length -= 1; | |
| 792 manualGas->percentageO2 = tempU8; | |
| 793 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 794 bytesRead +=1; | |
| 795 length -= 1; | |
| 796 manualGas->percentageHe = tempU8; | |
| 797 | |
| 798 if(gasid) | |
| 799 *gasid = 0; | |
| 800 } | |
| 801 } | |
| 802 | |
| 803 if(divisor.temperature == 0) | |
| 804 { | |
| 805 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 806 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 807 bytesRead +=2; | |
| 808 length -= 2; | |
| 809 if(temperature) | |
| 810 { | |
| 811 *temperature = (int32_t)temp; | |
| 812 } | |
| 813 } | |
| 814 else | |
| 815 { | |
| 816 divisor.temperature--; | |
| 817 } | |
| 818 | |
| 819 if(smallHeader.deco_ndlDivisor > 0) | |
| 820 { | |
| 821 if(divisor.deco_ndl == 0) | |
| 822 { | |
| 823 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 824 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 825 if(decostopDepth) | |
| 826 { | |
| 827 *decostopDepth = tempU8 * 100; | |
| 828 } | |
| 829 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 830 bytesRead += 2; | |
| 831 length -= 2; | |
| 832 } | |
| 833 else | |
| 834 { | |
| 835 divisor.deco_ndl--; | |
| 836 } | |
| 837 } | |
| 838 | |
| 839 if(divisor.ppo2 == 0) | |
| 840 { | |
| 841 int32_t ppO2Tmp = 0; | |
| 842 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 843 for(int i = 0; i <3 ; i++) | |
| 844 { | |
| 845 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 846 ppO2Tmp += tempU8; | |
| 847 bytesRead +=1; | |
| 848 length -= 1; | |
| 849 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 850 bytesRead +=2; | |
| 851 length -= 2; | |
| 852 if(sensor1 && (i==0)) | |
| 853 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 854 if(sensor2 && (i==1)) | |
| 855 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 856 if(sensor3 && (i==2)) | |
| 857 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 858 } | |
| 859 } | |
| 860 else | |
| 861 { | |
| 862 divisor.ppo2--; | |
| 863 } | |
| 864 | |
| 865 if(smallHeader.decoplanDivisor > 0) | |
| 866 { | |
| 867 if(divisor.decoplan == 0) | |
| 868 { | |
| 869 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 870 for(int i = 0; i <15; i++) | |
| 871 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 872 bytesRead += 15; | |
| 873 length -= 15; | |
| 874 } | |
| 875 else | |
| 876 { | |
| 877 divisor.decoplan--; | |
| 878 } | |
| 879 } | |
| 880 | |
| 881 | |
| 882 | |
| 883 if(divisor.cns == 0) | |
| 884 { | |
| 885 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 886 | |
| 887 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 888 bytesRead +=2; | |
| 889 length -= 2; | |
| 890 if(cns) | |
| 891 { | |
| 892 *cns = (int32_t)temp; | |
| 893 } | |
| 894 } | |
| 895 else | |
| 896 { | |
| 897 divisor.cns--; | |
| 898 } | |
| 899 | |
| 900 if (length != 0) | |
| 901 return 0; | |
| 902 | |
| 903 return bytesRead; | |
| 904 } | |
| 905 /** | |
| 906 ****************************************************************************** | |
| 907 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 908 * @author Peter Ryser | |
| 909 * @version V0.0.1 | |
| 910 * @date 22-April-2014 | |
| 911 ****************************************************************************** | |
| 912 * | |
| 913 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 914 * @param uint16_t length : maxlength of output arrays | |
| 915 * @param int32_t* depth : output array | |
| 916 * @param int16_t * gasid : output array | |
| 917 * @param int32_t* temperature : output array | |
| 918 * @param int32_t* ppo2 : output array | |
| 919 * @param int32_t* cns : output array | |
| 920 * @return length of output | |
| 921 */ | |
| 922 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, uint16_t* decostopDepth) | |
| 923 { | |
| 924 //Test read | |
| 925 //SLogbookHeader header; | |
| 926 | |
| 927 //logbook_getHeader(&header); | |
| 928 SLogbookHeader header; | |
| 929 int iNum; | |
| 930 int firstgasid = 0; | |
| 931 int retVal = 0; | |
| 932 int compression = 0; | |
| 933 int i; | |
| 934 // uint32_t diveTime_seconds; | |
| 935 int32_t depthVal = 0; | |
| 936 int16_t gasidVal = 0; | |
| 937 int16_t setPointVal = 0; | |
| 938 int16_t bailoutVal = 0; | |
| 939 int16_t bailoutLast = 0; | |
| 940 uint16_t setPointLast = 0; | |
| 941 int32_t temperatureVal = 0; | |
| 942 int32_t sensor1Val = 0; | |
| 943 int32_t sensor2Val = 0; | |
| 944 int32_t sensor3Val = 0; | |
| 945 int32_t sensor1Last = 0; | |
| 946 int32_t sensor2Last = 0; | |
| 947 int32_t sensor3Last = 0; | |
| 948 int32_t cnsVal = 0; | |
| 949 int32_t depthLast = 0; | |
| 950 int16_t gasidLast = 0; | |
| 951 int32_t temperatureLast = 0; | |
| 952 int32_t temperatureFirst = 0; | |
| 953 int32_t cnsLast = 0; | |
| 954 int16_t decostepDepthVal = 0; | |
| 955 int16_t decostepDepthLast = 0; | |
| 956 | |
| 957 SManualGas manualGasVal; | |
| 958 SManualGas manualGasLast; | |
| 959 manualGasLast.percentageO2 = 0; | |
| 960 manualGasLast.percentageHe = 0; | |
| 961 | |
| 962 float ambiant_pressure_bar = 0; | |
| 963 float ppO2 = 0; | |
| 964 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 965 for(i = 0;i< 5;i++) | |
| 966 { | |
| 967 if(header.gasordil[i].note.ub.first) | |
| 968 break; | |
| 969 } | |
| 970 firstgasid = i + 1; | |
| 971 if(header.diveMode == DIVEMODE_CCR) | |
| 972 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 973 else | |
| 974 setPointLast = 0; | |
| 975 //diveTime_seconds = header.diveTime_seconds ; | |
| 976 for(compression = 1; compression < 100; compression ++) | |
| 977 { | |
| 978 if((header.total_diveTime_seconds / header.samplingRate)/compression <= length) | |
| 979 break; | |
| 980 } | |
| 981 | |
| 982 | |
| 983 for(i = 0;i< length;i++) | |
| 984 { | |
| 985 if(depth) | |
| 986 depth[i] = 0; | |
| 987 if(temperature) | |
| 988 temperature[i] = 0; | |
| 989 if(gasid) | |
| 990 gasid[i] = 0; | |
| 991 if(ppo2) | |
| 992 ppo2[i] = 0; | |
| 993 if(setpoint) | |
| 994 setpoint[i] = 0; | |
| 995 if(sensor1) | |
| 996 sensor1[i] = 0; | |
| 997 if(sensor2) | |
| 998 sensor2[i] = 0; | |
| 999 if(sensor3) | |
| 1000 sensor3[i] = 0; | |
| 1001 if(cns) | |
| 1002 cns[i] = 0; | |
| 1003 } | |
| 1004 //We start with fist gasid | |
| 1005 gasidLast = firstgasid; | |
| 1006 | |
| 1007 | |
| 1008 //uint16_t* ppo2, uint16_t* cns# | |
| 1009 uint32_t totalNumberOfBytes = 0; | |
| 1010 uint32_t bytesRead = 0; | |
| 1011 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); | |
| 1012 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1013 bytesRead += sizeof(SSmallHeader); | |
| 1014 | |
| 1015 clear_divisor(); | |
| 1016 | |
| 1017 iNum = 0; | |
| 1018 int counter = 0; | |
| 1019 temperatureLast = -1000; | |
| 1020 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) | |
| 1021 { | |
| 1022 ext_flash_set_entry_point(); | |
| 1023 divisorBackup = divisor; | |
| 1024 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 1025 | |
| 1026 if(retVal == 0) | |
| 1027 { | |
| 1028 //Error try to read again!!! | |
| 1029 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1030 divisor = divisorBackup; | |
| 1031 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 1032 | |
| 1033 if(retVal == 0) | |
| 1034 break; | |
| 1035 } | |
| 1036 bytesRead +=retVal; | |
| 1037 | |
| 1038 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value | |
| 1039 if(depthVal == -1) | |
| 1040 depthVal = depthLast; | |
| 1041 else | |
| 1042 depthLast = depthVal; | |
| 1043 | |
| 1044 if(gasidVal == -1) | |
| 1045 gasidVal = gasidLast; | |
| 1046 else | |
| 1047 gasidLast = gasidVal; | |
| 1048 | |
| 1049 if(temperatureVal == -1000) | |
| 1050 temperatureVal = temperatureLast; | |
| 1051 else | |
| 1052 { | |
| 1053 if(temperatureLast == -1000) | |
| 1054 temperatureFirst = temperatureVal; | |
| 1055 temperatureLast = temperatureVal; | |
| 1056 } | |
| 1057 | |
| 1058 if(setPointVal == -1) | |
| 1059 setPointVal = setPointLast; | |
| 1060 else | |
| 1061 setPointLast = setPointVal; | |
| 1062 | |
| 1063 if(sensor1Val == -1) | |
| 1064 sensor1Val = sensor1Last; | |
| 1065 else | |
| 1066 sensor1Last = sensor1Val; | |
| 1067 | |
| 1068 if(sensor2Val == -1) | |
| 1069 sensor2Val = sensor2Last; | |
| 1070 else | |
| 1071 sensor2Last = sensor2Val; | |
| 1072 | |
| 1073 if(sensor3Val == -1) | |
| 1074 sensor3Val = sensor3Last; | |
| 1075 else | |
| 1076 sensor3Last = sensor3Val; | |
| 1077 | |
| 1078 if(cnsVal == -1) | |
| 1079 cnsVal = cnsLast; | |
| 1080 else | |
| 1081 cnsLast = cnsVal; | |
| 1082 | |
| 1083 if(manualGasVal.percentageO2 == -1) | |
| 1084 manualGasVal = manualGasLast; | |
| 1085 else | |
| 1086 manualGasLast = manualGasVal; | |
| 1087 | |
| 1088 if(bailoutVal == -1) | |
| 1089 bailoutVal = bailoutLast; | |
| 1090 else | |
| 1091 bailoutLast = bailoutVal; | |
| 1092 | |
| 1093 if(decostepDepthVal == -1) | |
| 1094 decostepDepthVal = decostepDepthLast; | |
| 1095 else | |
| 1096 decostepDepthLast = decostepDepthVal; | |
| 1097 | |
| 1098 counter++; | |
| 1099 // Heed compression | |
| 1100 // Write here to arrays | |
| 1101 if(counter == compression) | |
| 1102 { | |
| 1103 if(depth) | |
| 1104 depth[iNum] = depthVal; | |
| 1105 if(gasid) | |
| 1106 gasid[iNum] = gasidVal; | |
| 1107 if(temperature) | |
| 1108 temperature[iNum] = temperatureVal; | |
| 1109 if(cns) | |
| 1110 cns[iNum] = cnsVal; | |
| 1111 if(bailout) | |
| 1112 bailout[iNum] = bailoutVal; | |
| 1113 if(decostopDepth) | |
| 1114 decostopDepth[iNum] = decostepDepthVal; | |
| 1115 | |
| 1116 if(ppo2) | |
| 1117 { | |
| 1118 //Calc ppo2 - Values | |
| 1119 SGas gas; | |
| 1120 gas.setPoint_cbar = setPointVal; | |
| 1121 if(gasidVal > 0) | |
| 1122 { | |
| 1123 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; | |
| 1124 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; | |
| 1125 } | |
| 1126 else | |
| 1127 { | |
| 1128 gas.helium_percentage = manualGasVal.percentageHe; | |
| 1129 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; | |
| 1130 } | |
| 1131 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; | |
| 1132 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); | |
| 1133 ppo2[iNum] = (uint16_t) ( ppO2 * 100); | |
| 1134 } | |
| 1135 | |
| 1136 if(setpoint) | |
| 1137 setpoint[iNum] = setPointVal; | |
| 1138 | |
| 1139 if(sensor1) | |
| 1140 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; | |
| 1141 if(sensor2) | |
| 1142 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; | |
| 1143 if(sensor3) | |
| 1144 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; | |
| 1145 iNum++; | |
| 1146 counter = 0; | |
| 1147 } | |
| 1148 } | |
| 1149 | |
| 1150 // Fix first Temperature Entries 150930 hw | |
| 1151 if(temperature) | |
| 1152 { | |
| 1153 int i = 0; | |
| 1154 while((temperature[i] == -1000) && (i < iNum)) | |
| 1155 temperature[i++] = temperatureFirst; | |
| 1156 } | |
| 1157 | |
| 1158 ext_flash_close_read_sample(); | |
| 1159 return iNum; | |
| 1160 } | |
| 1161 | |
| 1162 | |
| 1163 /******************************************************************************** | |
| 1164 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1165 * Should be called ten times per second | |
| 1166 * Automatically Initializes logbook at beginning of dive, | |
| 1167 * write samples every 2 seconds | |
| 1168 * and finishes logbook after end of dive | |
| 1169 *********************************************************************************/ | |
| 1170 | |
| 1171 void logbook_InitAndWrite(void) | |
| 1172 { | |
| 1173 SSettings *pSettings = settingsGetPointer(); | |
| 1174 static uint8_t bDiveMode = 0; | |
| 1175 static uint32_t tickstart = 0; | |
| 1176 uint32_t ticksdiff = 0; | |
| 1177 uint32_t lasttick = 0; | |
| 1178 static float min_temperature_float_celsius = 0; | |
| 1179 | |
| 1180 const SDiveState * pStateReal = stateRealGetPointer(); | |
| 1181 | |
| 1182 if(!bDiveMode) | |
| 1183 { | |
| 1184 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1185 { | |
| 1186 //InitdiveProfile | |
| 1187 pSettings->totalDiveCounter++; | |
| 1188 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1189 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1190 //Write logbook sample | |
| 1191 logbook_writeSample(*pStateReal); | |
| 1192 resetEvents(); | |
| 1193 tickstart = HAL_GetTick(); | |
| 1194 bDiveMode = 1; | |
| 1195 } | |
| 1196 } | |
| 1197 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1198 { | |
| 1199 lasttick = HAL_GetTick(); | |
| 1200 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1201 // | |
| 1202 if(ticksdiff >= 2000) | |
| 1203 { | |
| 1204 //Write logbook sample | |
| 1205 logbook_writeSample(*pStateReal); | |
| 1206 resetEvents(); | |
| 1207 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) | |
| 1208 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1209 tickstart = lasttick; | |
| 1210 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1211 { | |
| 1212 ext_flash_create_new_dive_log((uint8_t*)&header); | |
| 1213 /** save settings | |
| 1214 * with new lastDiveLogId and time and day | |
| 1215 */ | |
| 1216 pSettings->personalDiveCount++; | |
| 1217 if(pSettings->logbookOffset) | |
| 1218 { | |
| 1219 pSettings->logbookOffset++; | |
| 1220 } | |
| 1221 ext_flash_write_settings(); | |
| 1222 ext_flash_disable_protection_for_logbook(); | |
| 1223 bDiveMode = 3; | |
| 1224 } | |
| 1225 if(bDiveMode == 3) | |
| 1226 logbook_UpdateHeader(); | |
| 1227 } | |
| 1228 } | |
| 1229 else if(bDiveMode == 3) | |
| 1230 { | |
| 1231 //End of Dive | |
| 1232 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1233 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1234 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
| 1235 logbook_SetCompartmentDesaturation(); | |
| 1236 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); | |
| 1237 logbook_EndDive(); | |
| 1238 bDiveMode = 0; | |
| 1239 } else | |
| 1240 { | |
| 1241 ext_flash_enable_protection(); | |
| 1242 } | |
| 1243 } | |
| 1244 | |
| 1245 | |
| 1246 /* Private functions ---------------------------------------------------------*/ | |
| 1247 | |
| 1248 /******************************************************************************** | |
| 1249 * @brief logbook_UpdateHeader. / | |
| 1250 * set date, time, max depth. etc. pp. | |
| 1251 * the internal pointer to the end of profile and length will be set by | |
| 1252 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1253 * @author heinrichs weikamp gmbh | |
| 1254 * @version V0.0.1 | |
| 1255 * @date 27-Nov-2014 | |
| 1256 *********************************************************************************/ | |
| 1257 void logbook_UpdateHeader(void) | |
| 1258 { | |
| 1259 const SDiveState * pStateReal = stateRealGetPointer(); | |
| 1260 SSettings *pSettings = settingsGetPointer(); | |
| 1261 // uint16_t secondsAtShallow = 0; | |
| 1262 RTC_DateTypeDef Sdate; | |
| 1263 RTC_TimeTypeDef Stime; | |
| 1264 uint32_t time1_u32, time2_u32; | |
| 1265 uint32_t divetimeHelper; | |
| 1266 | |
| 1267 /* time and day */ | |
| 1268 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1269 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1270 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1271 | |
| 1272 header.dateYear = Sdate.Year; | |
| 1273 header.dateMonth = Sdate.Month; | |
| 1274 header.dateDay = Sdate.Date; | |
| 1275 header.timeHour = Stime.Hours; | |
| 1276 header.timeMinute = Stime.Minutes; | |
| 1277 */ | |
| 1278 /// 160315 Quick fix for empty date problem | |
| 1279 if((!(header.dateYear)) || (!(header.dateMonth)) || (!(header.dateDay))) | |
| 1280 { | |
| 1281 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1282 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1283 | |
| 1284 header.dateYear = Sdate.Year; | |
| 1285 header.dateMonth = Sdate.Month; | |
| 1286 header.dateDay = Sdate.Date; | |
| 1287 | |
| 1288 time1_u32 = (uint32_t)header.timeMinute + (uint32_t)(header.timeHour * 60); | |
| 1289 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); | |
| 1290 if(time2_u32 < time1_u32) | |
| 1291 { | |
| 1292 if(header.dateDay > 1) | |
| 1293 { | |
| 1294 header.dateDay -= 1; | |
| 1295 } | |
| 1296 else | |
| 1297 { | |
| 1298 header.dateMonth --; | |
| 1299 if(!header.dateMonth) | |
| 1300 { | |
| 1301 header.dateYear--; | |
| 1302 header.dateMonth = 12; | |
| 1303 header.dateDay = 31; | |
| 1304 } | |
| 1305 else | |
| 1306 { | |
| 1307 if(header.dateMonth == 2) | |
| 1308 header.dateDay = 28; | |
| 1309 else | |
| 1310 if((header.dateMonth == 4) || (header.dateMonth == 6) || (header.dateMonth == 9) || (header.dateMonth == 11)) | |
| 1311 header.dateDay = 30; | |
| 1312 else | |
| 1313 header.dateDay = 31; | |
| 1314 } | |
| 1315 } | |
| 1316 } | |
| 1317 } | |
| 1318 | |
| 1319 /* duration */ | |
| 1320 header.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; | |
| 1321 header.maxDepth = pStateReal->lifeData.max_depth_meter * 100; | |
| 1322 | |
| 1323 /* old: | |
| 1324 | |
| 1325 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1326 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1327 secondsAtShallow = 0; | |
| 1328 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1329 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1330 */ | |
| 1331 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
| 1332 header.diveTimeMinutes = (uint16_t)(divetimeHelper/60); | |
| 1333 divetimeHelper -= 60 * (uint32_t)header.diveTimeMinutes; | |
| 1334 header.diveTimeSeconds = (uint16_t)divetimeHelper; | |
| 1335 | |
| 1336 /* deco algorithm (final) */ | |
| 1337 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1338 { | |
| 1339 header.decoModel = 1; | |
| 1340 header.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; | |
| 1341 header.gfHigh = pStateReal->diveSettings.gf_high; | |
| 1342 } | |
| 1343 else | |
| 1344 { | |
| 1345 header.decoModel = 2; | |
| 1346 header.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; | |
| 1347 header.gfHigh = 0; | |
| 1348 } | |
| 1349 | |
| 1350 /* tissue load */ | |
| 1351 memcpy(header.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); | |
| 1352 memcpy(header.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); | |
| 1353 | |
| 1354 } | |
| 1355 | |
| 1356 | |
| 1357 void logbook_SetAverageDepth(float average_depth_meter) | |
| 1358 { | |
| 1359 header.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); | |
| 1360 } | |
| 1361 | |
| 1362 | |
| 1363 void logbook_SetMinTemperature(float min_temperature_celsius) | |
| 1364 { | |
| 1365 header.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); | |
| 1366 } | |
| 1367 | |
| 1368 | |
| 1369 void logbook_SetMaxCNS(float max_cns_percentage) | |
| 1370 { | |
| 1371 if(max_cns_percentage < 9999) | |
| 1372 header.maxCNS = (uint16_t)(max_cns_percentage); | |
| 1373 else | |
| 1374 header.maxCNS = 9999; | |
| 1375 } | |
| 1376 | |
| 1377 | |
| 1378 void logbook_SetDesaturationTime(void) | |
| 1379 { | |
| 1380 header.desaturationTime = 48 * 60; | |
| 1381 } | |
| 1382 | |
| 1383 | |
| 1384 void logbook_SetCompartmentDesaturation(void) | |
| 1385 { | |
| 1386 const SDiveState * pStateReal = stateRealGetPointer(); | |
| 1387 | |
| 1388 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1389 for(int i=0;i<16;i++) | |
| 1390 { | |
| 1391 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
| 1392 header.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); | |
| 1393 else | |
| 1394 header.n2CompartDesatTime_min[i] = 255; | |
| 1395 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) | |
| 1396 header.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); | |
| 1397 else | |
| 1398 header.heCompartDesatTime_min[i] = 255; | |
| 1399 } | |
| 1400 } | |
| 1401 | |
| 1402 void logbook_SetLastStop(float last_stop_depth_bar) | |
| 1403 { | |
| 1404 header.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); | |
| 1405 } | |
| 1406 | |
| 1407 void logbook_writedata(void * data, int length_byte) | |
| 1408 { | |
| 1409 ext_flash_write_sample(data, length_byte); | |
| 1410 } | |
| 1411 | |
| 1412 | |
| 1413 /******************************************************************************** | |
| 1414 * @brief logbook_build_ostc3header. / | |
| 1415 * @author heinrichs weikamp gmbh | |
| 1416 * @version V0.0.2 | |
| 1417 * @date 27-Nov-2014 | |
| 1418 *********************************************************************************/ | |
| 1419 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1420 { | |
| 1421 convert_Type data; | |
| 1422 | |
| 1423 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); | |
| 1424 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); | |
| 1425 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); | |
| 1426 | |
| 1427 data.u8bit.byteHigh = 0; | |
| 1428 data.u8bit.byteLow = pHead->profileLength[0]; | |
| 1429 data.u8bit.byteMidLow = pHead->profileLength[1]; | |
| 1430 data.u8bit.byteMidHigh = pHead->profileLength[2]; | |
| 1431 | |
| 1432 if(data.u32bit != 0xFFFFFF) | |
| 1433 data.u32bit += 3; | |
| 1434 | |
| 1435 headerOSTC3.profileLength[0] = data.u8bit.byteLow; | |
| 1436 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; | |
| 1437 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1438 | |
| 1439 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); | |
| 1440 | |
| 1441 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) | |
| 1442 { | |
| 1443 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; | |
| 1444 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); | |
| 1445 headerOSTC3.safetyDistance_10cm = 0; | |
| 1446 | |
| 1447 for(int i=0;i<5;i++) | |
| 1448 { | |
| 1449 if(!pHead->gasordil[i].note.ub.active) | |
| 1450 headerOSTC3.gasordil[3 + (i*4)] = 0; | |
| 1451 else if(pHead->gasordil[i].note.ub.first) | |
| 1452 { | |
| 1453 /* depth = 0, note = 1 */ | |
| 1454 headerOSTC3.gasordil[2 + (i*4)] = 0; | |
| 1455 headerOSTC3.gasordil[3 + (i*4)] = 1; | |
| 1456 } | |
| 1457 else if( pHead->gasordil[i].depth_meter) | |
| 1458 { | |
| 1459 /* note = 3 */ | |
| 1460 headerOSTC3.gasordil[3 + (i*4)] = 3; | |
| 1461 } | |
| 1462 } | |
| 1463 } | |
| 1464 else | |
| 1465 { | |
| 1466 headerOSTC3.logbookProfileVersion = 0xFF; | |
| 1467 headerOSTC3.personalDiveCount[0] = 0xFF; | |
| 1468 headerOSTC3.personalDiveCount[1] = 0xFF; | |
| 1469 headerOSTC3.safetyDistance_10cm = 0xFF; | |
| 1470 } | |
| 1471 | |
| 1472 headerOSTC3.dateYear = pHead->dateYear; | |
| 1473 headerOSTC3.dateMonth = pHead->dateMonth; | |
| 1474 headerOSTC3.dateDay = pHead->dateDay; | |
| 1475 headerOSTC3.timeHour = pHead->timeHour; | |
| 1476 headerOSTC3.timeMinute = pHead->timeMinute; | |
| 1477 | |
| 1478 | |
| 1479 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); | |
| 1480 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1481 | |
| 1482 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1483 | |
| 1484 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); | |
| 1485 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); | |
| 1486 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); | |
| 1487 | |
| 1488 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; | |
| 1489 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; | |
| 1490 | |
| 1491 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); | |
| 1492 | |
| 1493 headerOSTC3.samplingRate = pHead->samplingRate; | |
| 1494 | |
| 1495 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); | |
| 1496 | |
| 1497 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; | |
| 1498 headerOSTC3.gfAtEnd = pHead->gfAtEnd; | |
| 1499 | |
| 1500 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); | |
| 1501 | |
| 1502 headerOSTC3.salinity = pHead->salinity; | |
| 1503 | |
| 1504 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); | |
| 1505 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); | |
| 1506 memcpy(headerOSTC3.total_diveTime_seconds,&pHead->total_diveTime_seconds, 2); | |
| 1507 | |
| 1508 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; | |
| 1509 headerOSTC3.gfHigh = pHead->gfHigh; | |
| 1510 headerOSTC3.decoModel = pHead->decoModel; | |
| 1511 | |
| 1512 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); | |
| 1513 | |
| 1514 headerOSTC3.diveMode = pHead->diveMode; | |
| 1515 headerOSTC3.CCRmode = pHead->CCRmode; | |
| 1516 | |
| 1517 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); | |
| 1518 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); | |
| 1519 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); | |
| 1520 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); | |
| 1521 | |
| 1522 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; | |
| 1523 | |
| 1524 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); | |
| 1525 | |
| 1526 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; | |
| 1527 | |
| 1528 memcpy(headerOSTC3.batteryGaugeRegisters,&pHead->batteryGaugeRegisters, 6); | |
| 1529 | |
| 1530 | |
| 1531 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); | |
| 1532 | |
| 1533 return &headerOSTC3; | |
| 1534 } | |
| 1535 | |
| 1536 | |
| 1537 /******************************************************************************** | |
| 1538 * @brief logbook_build_ostc3header_compact. / | |
| 1539 * @author heinrichs weikamp gmbh | |
| 1540 * @version V0.0.1 | |
| 1541 * @date 31-Juli-2015 | |
| 1542 *********************************************************************************/ | |
| 1543 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1544 { | |
| 1545 convert_Type data; | |
| 1546 | |
| 1547 data.u8bit.byteHigh = 0; | |
| 1548 data.u8bit.byteLow = pHead->profileLength[0]; | |
| 1549 data.u8bit.byteMidLow = pHead->profileLength[1]; | |
| 1550 data.u8bit.byteMidHigh = pHead->profileLength[2]; | |
| 1551 | |
| 1552 if(data.u32bit != 0xFFFFFF) | |
| 1553 { | |
| 1554 data.u32bit += 3; | |
| 1555 | |
| 1556 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; | |
| 1557 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; | |
| 1558 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1559 | |
| 1560 headerOSTC3compact.dateYear = pHead->dateYear; | |
| 1561 headerOSTC3compact.dateMonth = pHead->dateMonth; | |
| 1562 headerOSTC3compact.dateDay = pHead->dateDay; | |
| 1563 headerOSTC3compact.timeHour = pHead->timeHour; | |
| 1564 headerOSTC3compact.timeMinute = pHead->timeMinute; | |
| 1565 | |
| 1566 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); | |
| 1567 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1568 | |
| 1569 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1570 | |
| 1571 | |
| 1572 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; | |
| 1573 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); | |
| 1574 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end | |
| 1575 } | |
| 1576 else | |
| 1577 { | |
| 1578 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1579 } | |
| 1580 return &headerOSTC3compact; | |
| 1581 } | |
| 1582 | |
| 1583 | |
| 1584 /** | |
| 1585 ****************************************************************************** | |
| 1586 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 1587 * @author Peter Ryser | |
| 1588 * @version V0.0.1 | |
| 1589 * @date 22-April-2014 | |
| 1590 ****************************************************************************** | |
| 1591 * | |
| 1592 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1593 * @param uint16_t length : maxlength of output arrays | |
| 1594 * @param int32_t* depth : output array | |
| 1595 * @param int16_t * gasid : output array | |
| 1596 * @param int32_t* temperature : output array | |
| 1597 * @param int32_t* ppo2 : output array | |
| 1598 * @param int32_t* cns : output array | |
| 1599 * @return length of output | |
| 1600 */ | |
| 1601 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1602 { | |
| 1603 int16_t retVal; | |
| 1604 int32_t depthVal = 0; | |
| 1605 int16_t gasidVal = 0; | |
| 1606 int16_t setPointVal = 0; | |
| 1607 int16_t bailoutVal = 0; | |
| 1608 int32_t temperatureVal = 0; | |
| 1609 int32_t sensor1Val = 0; | |
| 1610 int32_t sensor2Val = 0; | |
| 1611 int32_t sensor3Val = 0; | |
| 1612 int32_t cnsVal = 0; | |
| 1613 SManualGas manualGasVal; | |
| 1614 | |
| 1615 //uint16_t* ppo2, uint16_t* cns# | |
| 1616 uint32_t bytesRead = 0; | |
| 1617 | |
| 1618 ext_flash_read_block_start(); | |
| 1619 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1620 bytesRead += sizeof(SSmallHeader); | |
| 1621 | |
| 1622 clear_divisor(); | |
| 1623 | |
| 1624 | |
| 1625 int sampleCounter = 0; | |
| 1626 int maxdepth = 0; | |
| 1627 uint32_t avrdepth = 0; | |
| 1628 while (true) | |
| 1629 { | |
| 1630 | |
| 1631 ext_flash_set_entry_point(); | |
| 1632 divisorBackup = divisor; | |
| 1633 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1634 if(retVal == 0) | |
| 1635 { | |
| 1636 //Error try to read again!!! | |
| 1637 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1638 divisor = divisorBackup; | |
| 1639 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1640 | |
| 1641 if(retVal == 0) | |
| 1642 { | |
| 1643 //Error try to read again!!! | |
| 1644 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1645 divisor = divisorBackup; | |
| 1646 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1647 | |
| 1648 if(retVal == 0) | |
| 1649 { | |
| 1650 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1651 break; | |
| 1652 } | |
| 1653 | |
| 1654 } | |
| 1655 } | |
| 1656 if(depthVal > maxdepth) | |
| 1657 maxdepth = depthVal; | |
| 1658 avrdepth += depthVal; | |
| 1659 sampleCounter++; | |
| 1660 bytesRead +=retVal; | |
| 1661 } | |
| 1662 avrdepth/= sampleCounter; | |
| 1663 ext_flash_close_read_sample(); | |
| 1664 SLogbookHeader header; | |
| 1665 | |
| 1666 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1667 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1668 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1669 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1670 header.maxDepth = maxdepth; | |
| 1671 header.averageDepth_mbar = avrdepth; | |
| 1672 SSettings * settings = settingsGetPointer(); | |
| 1673 settings->lastDiveLogId = headerId; | |
| 1674 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1675 } | |
| 1676 | |
| 1677 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |