annotate wiki/Detailed CPU1-Upper Project.md @ 635:66c8a4ff9fc4
Debounce fallback warning:
In previous versions the fallback option (automatical setting of a fixed setpoint) was only done for communication timeout scenario in combination with a HUD. It is now also applied in case all sensors are rated as out of bounds. The signaling of the fallback warning (including optional automatic setpoint change) is now done taking a 5 seconds debounds time into account.
In case a fallback warning is active, then the only way to reset it is by selecting a new setpoint or by changing the sensor configuration (no change compared to previous implementation
author |
Ideenmodellierer |
date |
Wed, 24 Feb 2021 21:03:22 +0100 |
parents |
5f11787b4f42 |
children |
|
rev |
line source |
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
2
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
6
|
|
7 ## Make a specific project ##
|
|
8
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
10
|
|
11 **
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
13 **
|