Mercurial > public > ostc4
annotate Small_CPU/Inc/i2c.h @ 560:5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
author | Ideenmodellierer |
---|---|
date | Sun, 15 Nov 2020 19:53:09 +0100 |
parents | 3328189786e7 |
children | 91a8f9893e68 |
rev | line source |
---|---|
38 | 1 /* Define to prevent recursive inclusion -------------------------------------*/ |
2 #ifndef I2C_H | |
3 #define I2C_H | |
4 | |
165 | 5 /* Pressure Sensor */ |
357 | 6 #define DEVICE_PRESSURE_MS5803 0xEE // gen 1 and gen 2 use 0xEE (MS5803) |
7 #define DEVICE_PRESSURE_MS5837 0xEC // end-2019 hardware (gen 3) uses 0xEC (MS5837) | |
38 | 8 |
165 | 9 /* Compass/Accelerometer */ |
357 | 10 #define COMPASS_NOT_RECOGNIZED 0xAA ///< id used with hardwareCompass |
11 #define compass_generation1 0x01 // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) | |
12 #define compass_generation2 0x02 // Hardware gen 2 (Single chip solution LSM303D) | |
13 #define compass_generation3 0x03 // Hardware gen 3 (Single chip solution LSM303AGR) | |
14 | |
165 | 15 #define DEVICE_ACCELARATOR_MMA8452Q 0x38 // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) |
357 | 16 #define DEVICE_COMPASS_HMC5883L 0x3C // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) |
38 | 17 |
165 | 18 #define DEVICE_COMPASS_303D 0x3C // Hardware gen 2 (Single chip solution LSM303D) |
357 | 19 |
165 | 20 #define DEVICE_COMPASS_303AGR 0x3C // Hardware gen 3 (Single chip solution LSM303AGR) |
357 | 21 #define DEVICE_ACCELARATOR_303AGR 0x32 // Hardware gen 3 (Single chip solution LSM303AGR) |
22 | |
23 // Compass 3 defines (Can move in separate .h file...) | |
24 #define WHOIAM_VALUE_LSM303AGR 0x33 | |
38 | 25 |
26 /* Battery Gas Gauge */ | |
165 | 27 #define DEVICE_BATTERYGAUGE 0xC8 // LTC2941 battery gauge |
38 | 28 |
545
e595d2d1f77f
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
heinrichsweikamp
parents:
357
diff
changeset
|
29 /* ADC for external bulkhead */ |
554
3328189786e7
Added external ADC interface functionality (MCP3424):
Ideenmodellierer
parents:
545
diff
changeset
|
30 #define DEVICE_EXTERNAL_ADC 0xD0 // MCP3424 with Adr0=GND and Adr1=GND (Hardware gen 3 only) |
545
e595d2d1f77f
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
heinrichsweikamp
parents:
357
diff
changeset
|
31 |
38 | 32 |
33 /* Includes ------------------------------------------------------------------*/ | |
34 #include "stm32f4xx_hal.h" | |
35 | |
36 HAL_StatusTypeDef I2C_Master_Transmit( uint16_t DevAddress, uint8_t *pData, uint16_t Size); | |
37 HAL_StatusTypeDef I2C_Master_TransmitNoStop( uint16_t DevAddress, uint8_t *pData, uint16_t Size); | |
38 HAL_StatusTypeDef I2C_Master_Receive( uint16_t DevAddress, uint8_t *pData, uint16_t Size); | |
39 HAL_StatusTypeDef MX_I2C1_Init(void); | |
40 void I2C_DeInit(void); | |
41 HAL_StatusTypeDef I2C1_Status(void); | |
42 | |
43 GPIO_PinState MX_I2C1_TestAndClear(void); | |
44 | |
45 //void I2C_Error(void); | |
46 | |
47 | |
48 #endif /* I2C_H */ |