annotate wiki/Detailed CPU1-Upper Project.md @ 775:46c6d2380d4e
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Uses the configured setpoint with the highest / lowest switch depth as the high / low setpoints respectively. (mikeller)
| author |
heinrichsweikamp |
| date |
Thu, 11 May 2023 12:13:03 +0200 |
| parents |
5f11787b4f42 |
| children |
|
| rev |
line source |
|
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
|
2
|
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
|
6
|
|
|
7 ## Make a specific project ##
|
|
|
8
|
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
|
10
|
|
|
11 **
|
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
|
13 **
|
