Mercurial > public > ostc4
annotate Common/Inc/data_exchange.h @ 907:46a21ff3f5ab Evo_2_23
Adaptation custom view deco plan for VPM:
The VPM deco plan now shows the start of deco zone as well as the state of the deco table state. In case the table defined when reaching the deco zone is updated then the header line will change to yellow to indicate this. In case a deco stop is missed the head line will change to red.
| author | ideenmodellierer |
|---|---|
| date | Sun, 13 Oct 2024 18:13:35 +0200 |
| parents | 2225c467f1e9 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/data_exchange.h | |
| 5 /// \brief Data exchange between RTE and Discovery processors. | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef DATA_EXCHANGE_H | |
| 28 #define DATA_EXCHANGE_H | |
| 29 | |
| 30 #include "data_central.h" | |
| 31 #include "settings.h" | |
| 32 #include "stm32f4xx_hal.h" | |
| 33 | |
| 691 | 34 /* Command definitions for control of external interface */ |
| 35 /* 1st nibble binary on/off states */ | |
| 36 /* 2nd nibble UART protocol selection */ | |
| 37 /* 3rd nibble reserve */ | |
| 38 /* 4th nibble command channel */ | |
| 39 #define EXT_INTERFACE_33V_ON (0x8000u) /* Bit set to enable 3.3V power interface */ | |
| 40 #define EXT_INTERFACE_ADC_ON (0x4000u) /* Bit set to enable ADC conversion */ | |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
41 |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
42 /* Command subset */ |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
43 #define EXT_INTERFACE_AUTODETECT (0x0001u) /* Start auto detection of connected sensors */ |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
44 #define EXT_INTERFACE_COPY_SENSORMAP (0x0002u) /* Use the sensor map provided by master for internal operations */ |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
45 #define EXT_INTERFACE_CO2_CALIB (0x0010u) /* Request calibration of CO2Sensor */ |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
46 #define EXT_INTERFACE_O2_INDICATE (0x0020u) /* Request LED to blink*/ |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
47 |
| 691 | 48 #define DATA_BUFFER_ADC (0x01u) |
| 49 #define DATA_BUFFER_CO2 (0x02u) | |
| 662 | 50 |
|
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
51 #define EXTIF_SENSOR_INFO_SIZE (32u) /* size of data array reserved for extended sensor data from external interface */ |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
52 |
| 756 | 53 #define CO2_WARNING_LEVEL_PPM (2000u) /* Early warning to indicate unexpected high co2 concentration (yellow) */ |
| 54 #define CO2_ALARM_LEVEL_PPM (5000u) /* starting by this level CO2 has a negative impact on health (long exposure) */ | |
| 55 | |
| 38 | 56 enum MODE |
| 57 { | |
| 58 MODE_SURFACE = 0, | |
| 59 MODE_DIVE = 1, | |
| 60 MODE_CALIB = 2, | |
| 61 MODE_SLEEP = 3, | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
62 MODE_SHUTDOWN = 4, |
| 38 | 63 MODE_ENDDIVE = 5, |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
64 MODE_BOOT = 6, |
| 38 | 65 MODE_CHARGESTART = 7, |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
66 MODE_TEST = 8, |
| 38 | 67 MODE_POWERUP = 9, |
| 68 }; | |
| 69 | |
| 70 enum ACCIDENT_BITS | |
| 71 { | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
72 ACCIDENT_DECOSTOP = 0x01, |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
73 ACCIDENT_CNS = 0x02, |
| 38 | 74 ACCIDENT_CNSLVL2 = 0x02 + 0x04, |
| 75 ACCIDENT_SPARE2 = 0x08, | |
| 76 ACCIDENT_SPARE3 = 0x10, | |
| 77 ACCIDENT_SPARE4 = 0x20, | |
| 78 ACCIDENT_SPARE5 = 0x40, | |
| 79 ACCIDENT_SPARE6 = 0x80 | |
| 80 }; | |
| 81 | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
82 |
| 38 | 83 typedef struct{ |
| 84 uint8_t button:1; | |
| 85 uint8_t date:1; | |
| 86 uint8_t time:1; | |
| 87 uint8_t clearDeco:1; | |
| 88 uint8_t compass:1; | |
| 89 uint8_t devicedata:1; | |
| 90 uint8_t batterygauge:1; | |
| 91 uint8_t accident:1; | |
| 92 } confirmbit8_t; | |
| 93 | |
|
555
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
94 typedef struct{ |
| 559 | 95 uint8_t checkCompass:1; |
| 96 uint8_t checkADC:1; | |
| 97 uint8_t reserve:5; | |
|
555
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
98 uint8_t extADC:1; |
|
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
99 uint8_t compass:8; |
|
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
100 } hw_Info_t; |
|
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
101 |
|
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
102 |
| 38 | 103 #define CRBUTTON (0x01) |
| 104 #define CRDATE (0x02) | |
| 105 #define CRTIME (0x04) | |
| 662 | 106 #define CRCLEARDECO (0x08) |
| 107 #define CRCOMPASS (0x10) | |
| 108 #define CRDEVICEDATA (0x20) | |
| 109 #define CRBATTERY (0x40) | |
| 110 #define CRACCIDENT (0x80) | |
| 38 | 111 |
| 112 typedef union{ | |
| 113 confirmbit8_t ub; | |
| 114 uint8_t uw; | |
| 115 } confirmbit8_Type; | |
| 116 | |
| 117 typedef struct | |
| 118 { | |
| 119 uint8_t checkCode[4]; | |
| 120 | |
| 121 } SDataExchangeHeader; | |
| 122 | |
| 123 typedef struct | |
| 124 { | |
| 125 uint8_t checkCode[4]; | |
| 126 | |
| 127 } SDataExchangeFooter; | |
| 128 | |
| 129 typedef struct | |
| 130 { | |
| 131 SDataExchangeHeader header; | |
| 132 SLifeData lifeData; | |
| 133 } SDataExchangeMasterToSlave; | |
| 134 | |
| 135 typedef struct | |
| 136 { | |
|
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
137 int32_t temperature; |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
138 uint32_t status; |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
139 uint64_t sensorId; |
| 723 | 140 int32_t intensity; |
| 141 int32_t ambient; | |
| 142 int32_t pressure; | |
| 143 int32_t humidity; | |
|
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
144 } SSensorDataDiveO2; |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
145 |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
146 typedef struct |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
147 { |
| 38 | 148 //pressure |
| 149 float temperature; | |
| 150 float pressure_mbar; | |
| 151 float surface_mbar; | |
| 152 float ascent_rate_meter_per_min; | |
| 153 //toxic | |
| 154 float otu; | |
| 155 float cns; | |
| 156 uint16_t desaturation_time_minutes; | |
| 157 uint16_t no_fly_time_minutes; | |
| 158 //tisssue | |
| 159 float tissue_nitrogen_bar[16]; | |
| 160 float tissue_helium_bar[16]; | |
| 161 //maxcrushingpressure | |
| 162 float max_crushing_pressure_he[16]; | |
| 163 float max_crushing_pressure_n2[16]; | |
| 164 float adjusted_critical_radius_he[16]; | |
| 165 float adjusted_critical_radius_n2[16]; | |
| 166 // Compass | |
| 167 float compass_heading; | |
| 168 float compass_roll; | |
| 169 float compass_pitch; | |
| 170 int16_t compass_DX_f; | |
| 171 int16_t compass_DY_f; | |
| 172 int16_t compass_DZ_f; | |
| 173 //time | |
| 174 uint16_t counterSecondsShallowDepth; | |
| 175 uint32_t localtime_rtc_tr; | |
| 176 uint32_t localtime_rtc_dr; | |
| 177 uint32_t divetime_seconds; | |
| 178 uint32_t surfacetime_seconds; | |
| 179 uint32_t dive_time_seconds_without_surface_time; | |
| 180 //battery /* take care of uint8_t count to be in multiplies of 4 */ | |
| 181 float battery_voltage; | |
| 182 float battery_charge; | |
| 183 //ambient light | |
| 184 uint16_t ambient_light_level; | |
|
555
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
185 uint16_t SPARE_ALIGN32; |
|
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
186 float extADC_voltage[3]; |
| 662 | 187 uint16_t CO2_ppm; |
| 188 uint16_t CO2_signalStrength; | |
| 189 uint16_t externalInterface_CmdAnswer; | |
|
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
190 uint8_t alignmentdummy; |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
191 uint8_t externalInterface_SensorID; /* Used to identify how to read the sensor data array */ |
|
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
192 uint8_t sensor_data[EXTIF_SENSOR_INFO_SIZE]; /* sensor specific data array. Content may vary from sensor type to sensor type */ |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
193 uint8_t sensor_map[EXT_INTERFACE_SENSOR_CNT]; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
194 uint8_t SPARE_OldWireless[5]; /* 64 - 12 for extADC - 6 for CO2 - 34 for sensor (+dummmy) - sensor map*/ |
| 38 | 195 // PIC data |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
756
diff
changeset
|
196 uint8_t button_setting[4]; /* see dependency to SlaveData->buttonPICdata */ |
| 38 | 197 uint8_t SPARE1; |
| 198 //debug | |
| 199 uint32_t pressure_uTick; | |
| 200 uint32_t compass_uTick; | |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
839
diff
changeset
|
201 float fLat; |
|
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
839
diff
changeset
|
202 float fLon; |
| 38 | 203 |
| 204 } SExchangeData; | |
| 205 | |
| 206 typedef struct | |
| 207 { | |
| 208 uint8_t VPMconservatism; | |
| 209 SGas actualGas; | |
| 210 | |
| 211 int8_t offsetPressureSensor_mbar; | |
| 212 int8_t offsetTemperatureSensor_centiDegree; | |
| 213 | |
| 662 | 214 uint16_t externalInterface_Cmd; |
| 38 | 215 |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
216 uint8_t externalInterface_SensorMap[EXT_INTERFACE_SENSOR_CNT]; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
723
diff
changeset
|
217 |
| 38 | 218 float UNUSED1[16-1];//VPM_adjusted_critical_radius_he[16]; |
| 219 float UNUSED2[16];//VPM_adjusted_critical_radius_n2[16]; | |
| 220 float UNUSED3[16];//VPM_adjusted_crushing_pressure_he[16]; | |
| 221 float UNUSED4[16];//VPM_adjusted_crushing_pressure_n2[16]; | |
| 222 float UNUSED5[16];//VPM_initial_allowable_gradient_he[16]; | |
| 223 float UNUSED6[16];//VPM_initial_allowable_gradient_n2[16]; | |
| 224 float UNUSED7[16];//VPM_max_actual_gradient[16]; | |
| 225 | |
| 226 RTC_TimeTypeDef newTime; | |
| 227 RTC_DateTypeDef newDate; | |
| 228 | |
| 229 float ambient_pressure_mbar_ceiling; | |
| 230 float descend_rate_bar_per_minute; | |
| 231 float ascend_rate_bar_per_minute; | |
| 232 | |
| 233 uint16_t timeoutDiveReachedZeroDepth; | |
| 234 uint16_t divetimeToCreateLogbook; | |
| 235 | |
| 236 uint8_t buttonResponsiveness[4]; | |
| 237 | |
| 238 SDevice DeviceData; | |
| 239 | |
| 240 float newBatteryGaugePercentageFloat; | |
| 241 | |
| 242 } SReceiveData; | |
| 243 | |
| 244 | |
| 245 typedef struct | |
| 246 { | |
| 247 SDataExchangeHeader header; | |
| 248 | |
| 249 uint8_t mode; | |
| 250 uint8_t power_on_reset; | |
| 251 uint8_t RTE_VERSION_high; | |
| 252 uint8_t RTE_VERSION_low; | |
| 253 | |
| 254 uint8_t chargeStatus; | |
| 255 uint8_t boolPICdata; | |
| 256 confirmbit8_Type confirmRequest; // confirmbit8_Type | |
| 691 | 257 uint8_t boolADCO2Data; |
| 38 | 258 |
| 259 uint8_t boolPressureData; | |
| 260 uint8_t boolCompassData; | |
| 261 uint8_t boolTisssueData; | |
| 262 uint8_t boolCrushingData; | |
| 263 | |
| 264 uint8_t boolToxicData; | |
| 265 uint8_t boolTimeData; | |
| 266 uint8_t boolBatteryData; | |
| 267 uint8_t boolAmbientLightData; | |
| 268 | |
| 269 uint8_t accidentFlags; | |
| 270 uint8_t sensorErrors; | |
| 271 uint8_t spare2; | |
| 272 uint8_t spare3; | |
| 273 | |
| 274 SExchangeData data[2]; | |
| 275 SDataExchangeFooter footer; | |
| 276 uint8_t CRC_feature_by_SPI[4]; | |
| 277 } SDataExchangeSlaveToMaster; | |
| 278 | |
| 279 | |
| 280 typedef struct | |
| 281 { | |
| 282 SDataExchangeHeader header; | |
| 283 | |
| 284 uint8_t mode; | |
| 285 uint8_t power_on_reset; | |
| 286 uint8_t RTE_VERSION_high; | |
| 287 uint8_t RTE_VERSION_low; | |
| 288 | |
| 289 uint8_t chargeStatus; | |
|
555
573a2bc796c8
Added HW_Info to Discovery <=> RTE data exchange:
Ideenmodellierer
parents:
51
diff
changeset
|
290 hw_Info_t hw_Info; |
| 38 | 291 uint8_t spare1; |
| 292 | |
| 293 uint8_t boolDeviceData; | |
| 294 uint8_t boolVpmRepetitiveDataValid; | |
| 295 uint8_t bool3; | |
| 296 uint8_t bool4; | |
| 297 | |
| 298 uint8_t spare1_1; | |
| 299 uint8_t spare1_2; | |
| 300 uint8_t spare1_3; | |
| 301 uint8_t spare1_4; | |
| 302 | |
| 303 uint8_t spare2_1; | |
| 304 uint8_t spare2_2; | |
| 305 uint8_t spare2_3; | |
| 306 uint8_t spare2_4; | |
| 307 | |
| 308 SDevice DeviceData[2]; | |
| 309 SVpmRepetitiveData VpmRepetitiveData; | |
| 310 | |
| 311 uint8_t arraySizeOfMinimumSExChangeDate[(2 * sizeof(SExchangeData)) - ((2 * sizeof(SDevice)) + sizeof(SVpmRepetitiveData))]; | |
| 312 SDataExchangeFooter footer; | |
| 313 uint8_t CRC_feature_by_SPI[4]; | |
| 314 } SDataExchangeSlaveToMasterDeviceData; | |
| 315 | |
| 316 | |
| 317 typedef struct | |
| 318 { | |
| 319 SDataExchangeHeader header; | |
| 320 | |
| 321 uint8_t mode; | |
| 322 uint8_t getDeviceDataNow; | |
| 323 uint8_t diveModeInfo; | |
| 324 uint8_t setEndDive; | |
| 325 | |
| 326 uint8_t bool4; | |
| 327 uint8_t setButtonSensitivityNow; | |
| 328 uint8_t setDateNow; | |
| 329 uint8_t setTimeNow; | |
| 330 | |
| 331 uint8_t calibrateCompassNow; | |
| 332 uint8_t clearDecoNow; | |
| 333 uint8_t setBatteryGaugeNow; | |
| 334 uint8_t bool9; | |
| 335 | |
| 336 uint8_t revisionHardware; | |
| 337 uint8_t revisionCRCx0x7A; | |
| 338 uint8_t spare1_3; | |
| 339 uint8_t spare1_4; | |
| 340 | |
| 341 uint8_t setAccidentFlag; | |
| 342 uint8_t spare2_1; | |
| 343 uint8_t spare2_2; | |
| 344 uint8_t spare2_3; | |
| 345 | |
| 346 SReceiveData data; | |
| 347 uint8_t arraySizeOfMinimumSExChangeDate[(2 * sizeof(SExchangeData)) - sizeof(SReceiveData)]; | |
| 348 SDataExchangeFooter footer; | |
| 349 uint8_t CRC_feature_by_SPI[4]; | |
| 350 } SDataReceiveFromMaster; | |
| 351 | |
| 352 | |
| 353 /* Size of Transmission buffer */ | |
| 354 #define EXCHANGE_BUFFERSIZE (sizeof(SDataExchangeSlaveToMaster) - 2) | |
| 355 #define EXCHANGE_BUFFERSIZE2 (sizeof(SDataReceiveFromMaster) - 2) | |
| 356 // header: 5 | |
| 357 // mode+bool: 5 | |
| 358 // data 552 ( 69 * float/4 * 2 ) | |
| 359 // footer: 4 | |
| 360 // ______________ | |
| 361 // SUM 566 | |
| 362 // CRC_feature does not count into BUFFERSIZE! | |
| 363 | |
| 364 //(COUNTOF(struct SDataExchangeSlaveToMaster) + 1) | |
| 365 | |
| 366 /* Exported macro ------------------------------------------------------------*/ | |
| 367 //#define COUNTOF(__BUFFER__) (sizeof(__BUFFER__) / sizeof(*(__BUFFER__))) | |
| 368 | |
| 369 #endif /* DATA_EXCHANGE_H */ | |
| 370 |