Mercurial > public > ostc4
annotate Discovery/Src/settings.c @ 776:45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
This allows the displayed compass reading to be configured to take into account the compass declination (difference between the measured magnetic North direction and the actual geographical North direction) that has different values for different locations around the globe. See https://magnetic-declination.com/ for more information. (mikeller)
| author | heinrichsweikamp |
|---|---|
| date | Thu, 18 May 2023 09:49:17 +0200 |
| parents | dfdfea8897f3 |
| children | 4abfb8a2a435 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/settings.c | |
| 5 /// \brief settingsHelperButtonSens_translate_hwOS_values_to_percentage. | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 6-March-2017 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include <string.h> | |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
30 #include <stdbool.h> |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
31 |
| 38 | 32 #include "settings.h" |
| 33 #include "firmwareEraseProgram.h" // for HARDWAREDATA_ADDRESS | |
| 34 #include "externLogbookFlash.h" // for SAMPLESTART and SAMPLESTOP | |
| 35 #include "text_multilanguage.h" // for LANGUAGE_END | |
| 36 #include "tHome.h" // for CVIEW_END | |
|
389
ebc2b571a0b9
Fix case for case sensitive OS
Jan Mulder <jan@jlmulder.nl>
parents:
382
diff
changeset
|
37 #include "motion.h" |
|
443
a5101c688b49
Introduced enum for lower left corner view selection:
ideenmodellierer
parents:
439
diff
changeset
|
38 #include "t7.h" |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
39 #include "data_central.h" |
| 38 | 40 |
| 662 | 41 static uint8_t settingsWarning = 0; /* Active if setting values have been corrected */ |
| 42 | |
| 38 | 43 SSettings Settings; |
| 44 | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
45 const uint8_t RTErequiredHigh = 3; |
| 762 | 46 const uint8_t RTErequiredLow = 1; |
| 38 | 47 |
| 75 | 48 const uint8_t FONTrequiredHigh = 1; |
| 49 const uint8_t FONTrequiredLow = 0; | |
| 38 | 50 |
| 51 uint8_t RTEactualHigh = 0; | |
| 52 uint8_t RTEactualLow = 0; | |
| 53 | |
| 54 // =============================================================================== | |
| 55 // SFirmwareData FirmwareData | |
| 56 /// @brief internal counter is for changes after last release | |
| 57 /// use date and info as well for this purpose | |
| 58 /// | |
| 59 // =============================================================================== | |
| 60 | |
| 61 const SFirmwareData firmware_FirmwareData __attribute__( (section(".firmware_firmware_data")) ) = | |
| 62 { | |
| 63 .versionFirst = 1, | |
| 695 | 64 .versionSecond = 6, |
| 762 | 65 .versionThird = 2, |
| 66 .versionBeta = 0, | |
| 38 | 67 |
| 68 /* 4 bytes with trailing 0 */ | |
|
55
a7683f9765da
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
heinrichsweikamp
parents:
48
diff
changeset
|
69 .signature = "mh", |
| 38 | 70 |
| 762 | 71 .release_year = 23, |
| 768 | 72 .release_month = 4, |
| 73 .release_day = 13, | |
| 38 | 74 .release_sub = 0, |
| 75 | |
| 76 /* max 48 with trailing 0 */ | |
| 77 //release_info ="12345678901234567890123456789012345678901" | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
274
diff
changeset
|
78 .release_info ="gcc_2nd", |
| 38 | 79 |
| 80 /* for safety reasons and coming functions */ | |
| 81 .magic[0] = FIRMWARE_MAGIC_FIRST, | |
| 82 .magic[1] = FIRMWARE_MAGIC_SECOND, | |
| 83 .magic[2] = FIRMWARE_MAGIC_FIRMWARE, /* the magic byte */ | |
| 84 .magic[3] = FIRMWARE_MAGIC_END | |
| 85 }; | |
| 86 | |
| 87 | |
| 88 /* always adjust check_and_correct_settings() accordingly | |
| 89 * There might even be entries with fixed values that have no range | |
| 90 */ | |
| 91 const SSettings SettingsStandard = { | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
92 .header = 0xFFFF0026, |
| 38 | 93 .warning_blink_dsec = 8 * 2, |
| 94 .lastDiveLogId = 0, | |
| 662 | 95 .logFlashNextSampleStartAddress = SAMPLESTART, |
| 38 | 96 |
| 97 .gas[0].oxygen_percentage = 21, | |
| 98 .gas[1].oxygen_percentage = 21, | |
| 99 .gas[2].oxygen_percentage = 21, | |
| 100 .gas[3].oxygen_percentage = 21, | |
| 101 .gas[4].oxygen_percentage = 21, | |
| 102 .gas[5].oxygen_percentage = 21, | |
| 103 .gas[6].oxygen_percentage = 21, | |
| 104 .gas[7].oxygen_percentage = 21, | |
| 105 .gas[8].oxygen_percentage = 21, | |
| 106 .gas[9].oxygen_percentage = 21, | |
| 107 .gas[10].oxygen_percentage = 21, | |
| 108 .gas[0].helium_percentage = 0, | |
| 109 .gas[1].helium_percentage = 0, | |
| 110 .gas[2].helium_percentage = 0, | |
| 111 .gas[3].helium_percentage = 0, | |
| 112 .gas[4].helium_percentage = 0, | |
| 113 .gas[5].helium_percentage = 0, | |
| 114 .gas[6].helium_percentage = 0, | |
| 115 .gas[7].helium_percentage = 0, | |
| 116 .gas[8].helium_percentage = 0, | |
| 117 .gas[9].helium_percentage = 0, | |
| 118 .gas[10].helium_percentage = 0, | |
| 119 .gas[0].depth_meter = 0, | |
| 120 .gas[1].depth_meter = 0, | |
| 121 .gas[2].depth_meter = 0, | |
| 122 .gas[3].depth_meter = 0, | |
| 123 .gas[4].depth_meter = 0, | |
| 124 .gas[5].depth_meter = 0, | |
| 125 .gas[6].depth_meter = 0, | |
| 126 .gas[7].depth_meter = 0, | |
| 127 .gas[8].depth_meter = 0, | |
| 128 .gas[9].depth_meter = 0, | |
| 129 .gas[10].depth_meter = 0, | |
| 130 .gas[0].depth_meter_travel = 0, | |
| 131 .gas[1].depth_meter_travel = 0, | |
| 132 .gas[2].depth_meter_travel = 0, | |
| 133 .gas[3].depth_meter_travel = 0, | |
| 134 .gas[4].depth_meter_travel = 0, | |
| 135 .gas[5].depth_meter_travel = 0, | |
| 136 .gas[6].depth_meter_travel = 0, | |
| 137 .gas[7].depth_meter_travel = 0, | |
| 138 .gas[8].depth_meter_travel = 0, | |
| 139 .gas[9].depth_meter_travel = 0, | |
| 140 .gas[10].depth_meter_travel = 0, | |
| 141 .gas[0].note.uw = 0, | |
| 142 .gas[1].note.ub.first = 1, | |
| 143 .gas[1].note.ub.active = 1, | |
| 144 .gas[1].note.ub.deco = 0, | |
| 145 .gas[1].note.ub.travel = 0, | |
| 146 .gas[2].note.uw = 0, | |
| 147 .gas[3].note.uw = 0, | |
| 148 .gas[4].note.uw = 0, | |
| 149 .gas[5].note.uw = 0, | |
| 150 .gas[6].note.ub.first = 1, | |
| 151 .gas[6].note.ub.active = 1, | |
| 152 .gas[6].note.ub.deco = 0, | |
| 153 .gas[6].note.ub.travel = 0, | |
| 154 .gas[7].note.uw = 0, | |
| 155 .gas[8].note.uw = 0, | |
| 156 .gas[9].note.uw = 0, | |
| 157 .gas[10].note.uw = 0, | |
| 158 .gas[0].bottle_size_liter = 0, | |
| 159 .gas[1].bottle_size_liter = 0, | |
| 160 .gas[2].bottle_size_liter = 0, | |
| 161 .gas[3].bottle_size_liter = 0, | |
| 162 .gas[4].bottle_size_liter = 0, | |
| 163 .gas[5].bottle_size_liter = 0, | |
| 164 .gas[6].bottle_size_liter = 0, | |
| 165 .gas[7].bottle_size_liter = 0, | |
| 166 .gas[8].bottle_size_liter = 0, | |
| 167 .gas[9].bottle_size_liter = 0, | |
| 168 .gas[10].bottle_size_liter = 0, | |
| 169 /* | |
| 170 .gas[0].bottle_wireless_status = 0, | |
| 171 .gas[1].bottle_wireless_status = 0, | |
| 172 .gas[2].bottle_wireless_status = 0, | |
| 173 .gas[3].bottle_wireless_status = 0, | |
| 174 .gas[4].bottle_wireless_status = 0, | |
| 175 .gas[5].bottle_wireless_status = 0, | |
| 176 .gas[6].bottle_wireless_status = 0, | |
| 177 .gas[7].bottle_wireless_status = 0, | |
| 178 .gas[8].bottle_wireless_status = 0, | |
| 179 .gas[9].bottle_wireless_status = 0, | |
| 180 .gas[10].bottle_wireless_status = 0, | |
| 181 */ | |
| 182 .gas[0].bottle_wireless_id = 0, | |
| 183 .gas[1].bottle_wireless_id = 0, | |
| 184 .gas[2].bottle_wireless_id = 0, | |
| 185 .gas[3].bottle_wireless_id = 0, | |
| 186 .gas[4].bottle_wireless_id = 0, | |
| 187 .gas[5].bottle_wireless_id = 0, | |
| 188 .gas[6].bottle_wireless_id = 0, | |
| 189 .gas[7].bottle_wireless_id = 0, | |
| 190 .gas[8].bottle_wireless_id = 0, | |
| 191 .gas[9].bottle_wireless_id = 0, | |
| 192 .gas[10].bottle_wireless_id = 0, | |
| 193 .setpoint[0].setpoint_cbar = 100, | |
| 194 .setpoint[1].setpoint_cbar = 70, | |
| 195 .setpoint[2].setpoint_cbar = 90, | |
| 196 .setpoint[3].setpoint_cbar = 100, | |
| 197 .setpoint[4].setpoint_cbar = 120, | |
| 198 .setpoint[5].setpoint_cbar = 140, | |
| 199 .setpoint[0].depth_meter = 0, | |
| 200 .setpoint[1].depth_meter = 0, | |
| 201 .setpoint[2].depth_meter = 0, | |
| 202 .setpoint[3].depth_meter = 0, | |
| 203 .setpoint[4].depth_meter = 0, | |
| 204 .setpoint[5].depth_meter = 0, | |
| 205 .setpoint[0].note.uw = 0, | |
| 206 .setpoint[1].note.ub.active = 1, | |
| 207 .setpoint[1].note.ub.first = 1, | |
| 208 .setpoint[2].note.ub.active = 1, | |
| 209 .setpoint[2].note.ub.first = 0, | |
| 210 .setpoint[3].note.ub.active = 1, | |
| 211 .setpoint[3].note.ub.first = 0, | |
| 212 .setpoint[4].note.ub.active = 1, | |
| 213 .setpoint[4].note.ub.first = 0, | |
| 214 .setpoint[5].note.ub.active = 1, | |
| 215 .setpoint[5].note.ub.first = 0, | |
| 216 | |
| 217 .CCR_Mode = CCRMODE_Sensors, | |
| 218 .dive_mode = DIVEMODE_OC, | |
| 219 .deco_type.ub.standard = GF_MODE, | |
| 220 .deco_type.ub.alternative = GF_MODE, | |
| 221 .ppO2_max_deco = 160, | |
| 222 .ppO2_max_std = 140, | |
| 223 .ppO2_min = 15, | |
| 224 .CNS_max = 90, | |
| 225 .ascent_MeterPerMinute_max = 30, | |
| 662 | 226 .ascent_MeterPerMinute_showGraph = 30, |
| 38 | 227 .future_TTS = 5, |
| 228 .GF_high = 85, | |
| 229 .GF_low = 30, | |
| 230 .aGF_high = 95, | |
| 231 .aGF_low = 95, | |
| 232 .VPM_conservatism.ub.standard = 2, | |
| 233 .VPM_conservatism.ub.alternative = 0, | |
| 234 .safetystopDuration = 1, | |
| 235 .AtemMinutenVolumenLiter = 25, | |
| 236 .ReserveFractionDenominator = 4, | |
| 237 .salinity = 0, | |
| 238 .last_stop_depth_meter = 3, | |
| 239 .stop_increment_depth_meter = 3, | |
| 240 .brightness = 1, | |
| 241 .date_format = DDMMYY, | |
| 242 .selected_language = 0, /* 0 = LANGUAGE_English */ | |
| 243 .customtext = " <your name>\n" " <address>", | |
| 244 .timeoutSurfacemode = 120, | |
| 245 .timeoutMenuSurface = 120,//240, | |
| 246 .timeoutMenuDive = 120,//20, | |
| 247 .timeoutMenuEdit = 120,//40, | |
| 248 .timeoutInfo = 120,//60, | |
| 249 .timeoutInfoCompass = 60, | |
| 250 .design = 7, | |
| 251 .timeoutDiveReachedZeroDepth = 300, | |
| 252 .divetimeToCreateLogbook = 60, | |
| 253 .serialHigh = 0, | |
| 254 .serialLow = 2, | |
| 255 /* | |
| 256 .firmwareVersion16to32bit.ub.first = 0, | |
| 257 .firmwareVersion16to32bit.ub.second = 6, | |
| 258 .firmwareVersion16to32bit.ub.third = 0, | |
| 259 .firmwareVersion16to32bit.ub.betaFlag = 0, | |
| 260 */ | |
| 261 .backup_localtime_rtc_tr = 0, | |
| 262 .backup_localtime_rtc_dr = 0, | |
| 263 .totalDiveCounter = 0, | |
| 264 .personalDiveCount = 0, | |
| 265 .showDebugInfo = 0, | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
266 .ButtonResponsiveness[0] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
267 .ButtonResponsiveness[1] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
268 .ButtonResponsiveness[2] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
269 .ButtonResponsiveness[3] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
| 38 | 270 .nonMetricalSystem = 0, |
| 271 .fallbackToFixedSetpoint = 1, | |
| 272 .bluetoothActive = 0, | |
| 273 .safetystopDepth = 5, | |
| 274 .updateSettingsAllowedFromHeader = 0xFFFF0002, | |
| 662 | 275 .pscr_lung_ratio = 10, |
| 276 .pscr_o2_drop = 4, | |
| 277 .co2_sensor_active = 0, | |
| 38 | 278 .ppo2sensors_deactivated = 0, |
| 279 .tX_colorscheme = 0, | |
|
443
a5101c688b49
Introduced enum for lower left corner view selection:
ideenmodellierer
parents:
439
diff
changeset
|
280 .tX_userselectedLeftLowerCornerPrimary = LLC_Temperature, |
| 38 | 281 .tX_userselectedLeftLowerCornerTimeout = 0, |
| 282 .tX_customViewPrimary = 1, | |
| 283 .tX_customViewTimeout = 0, | |
| 284 .timeoutEnterButtonSelectDive = 10, | |
| 285 .logbookOffset = 0, | |
| 286 .alwaysShowPPO2 = 0, | |
| 287 .extraDisplay = EXTRADISPLAY_BIGFONT, | |
| 288 .display_toogle_desc = 200, | |
| 289 .offsetPressure_mbar = 0, | |
| 290 .offsetTemperature_centigrad = 0, | |
| 291 .gasConsumption_travel_l_min = 30, | |
| 292 .gasConsumption_bottom_l_min = 30, | |
| 293 .gasConsumption_deco_l_min = 20, | |
| 294 .debugModeOnStart = 0, | |
| 295 .compassBearing = 0, | |
| 296 .lastKnownBatteryPercentage = 0, | |
| 297 .buttonBalance[0] = 3, | |
| 298 .buttonBalance[1] = 3, | |
| 299 .buttonBalance[2] = 3, | |
| 300 .firmwareVersion[0] = 0,//FirmwareData.firmwareVersion16to32bit.ub.first, | |
| 301 .firmwareVersion[1] = 0,//FirmwareData.firmwareVersion16to32bit.ub.second, | |
| 302 .firmwareVersion[2] = 0,//FirmwareData.firmwareVersion16to32bit.ub.third, | |
| 303 .firmwareVersion[3] = 0,//FirmwareData.firmwareVersion16to32bit.ub.betaFlag, | |
| 304 .timeoutSurfacemodeWithSensors = 600, | |
| 305 .VPM_model = 0, | |
| 306 .GF_model = 0, | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
307 .FactoryButtonBase = DEFAULT_BUTTONRESPONSIVENESS_GUI, |
| 38 | 308 .FactoryButtonBalance[0] = 3, |
| 309 .FactoryButtonBalance[1] = 3, | |
| 310 .FactoryButtonBalance[2] = 3, | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
311 .FlipDisplay = 0, |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
312 .cv_configuration = 0xFFFFFFFF, |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
313 .MotionDetection = MOTION_DETECT_OFF, |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
492
diff
changeset
|
314 .cv_config_BigScreen = 0xFFFFFFFF, |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
315 .compassInertia = 0, |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
316 .tX_customViewPrimaryBF = CVIEW_T3_Decostop, |
| 546 | 317 .viewPortMode = 0, |
| 318 .viewRoll = 0, | |
| 319 .viewPitch = 0, | |
| 320 .viewYaw = 0, | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
321 .ppo2sensors_source = 0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
322 .ppo2sensors_calibCoeff[0] = 0.0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
323 .ppo2sensors_calibCoeff[1] = 0.0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
324 .ppo2sensors_calibCoeff[2] = 0.0, |
| 567 | 325 .amPMTime = 0, |
| 650 | 326 .autoSetpoint = 0, |
| 710 | 327 .scrubTimerMax_Obsolete = 0, |
| 328 .scrubTimerCur_Obsolete = 0, | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
329 .scrubTimerMode = SCRUB_TIMER_OFF, |
| 733 | 330 .ext_sensor_map[0] = SENSOR_OPTIC, |
| 331 .ext_sensor_map[1] = SENSOR_OPTIC, | |
| 332 .ext_sensor_map[2] = SENSOR_OPTIC, | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
333 .ext_sensor_map[3] = SENSOR_NONE, |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
334 .ext_sensor_map[4] = SENSOR_NONE, |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
335 .buttonLockActive = 0, |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
336 .compassDeclinationDeg = 0, |
| 38 | 337 }; |
| 338 | |
| 339 /* Private function prototypes -----------------------------------------------*/ | |
| 340 uint8_t checkValue(uint8_t value,uint8_t from, uint8_t to); | |
| 341 | |
| 342 /* Functions -----------------------------------------------------------------*/ | |
| 343 | |
| 344 | |
| 345 // =============================================================================== | |
| 346 // set_new_settings_missing_in_ext_flash | |
| 347 /// @brief Add all the new setting variables of this version | |
| 348 /// or/and change what has changed in the meantime | |
| 349 /// | |
| 350 /// Additionally update the serial number if written via bluetooth | |
| 351 /// | |
| 352 // =============================================================================== | |
| 353 void set_new_settings_missing_in_ext_flash(void) | |
| 354 { | |
| 355 // never delete this part setting the serial | |
| 356 if(hardwareDataGetPointer()->secondarySerial != 0xFFFF) | |
| 357 { | |
| 358 settingsGetPointer()->serialHigh = (hardwareDataGetPointer()->secondarySerial / 256); | |
| 359 settingsGetPointer()->serialLow = (hardwareDataGetPointer()->secondarySerial & 0xFF); | |
| 360 } | |
| 361 else | |
| 362 if(hardwareDataGetPointer()->primarySerial != 0xFFFF) | |
| 363 { | |
| 364 settingsGetPointer()->serialHigh = (hardwareDataGetPointer()->primarySerial / 256); | |
| 365 settingsGetPointer()->serialLow = (hardwareDataGetPointer()->primarySerial & 0xFF); | |
| 366 } | |
| 367 else | |
| 368 { | |
| 369 settingsGetPointer()->serialHigh = 0; | |
| 370 settingsGetPointer()->serialLow = 0; | |
| 371 } | |
| 372 | |
| 373 settingsGetPointer()->firmwareVersion[0] = firmware_FirmwareData.versionFirst; | |
| 374 settingsGetPointer()->firmwareVersion[1] = firmware_FirmwareData.versionSecond; | |
| 375 settingsGetPointer()->firmwareVersion[2] = firmware_FirmwareData.versionThird; | |
| 376 settingsGetPointer()->firmwareVersion[3] = firmware_FirmwareData.versionBeta; | |
| 377 | |
| 378 SSettings* pSettings = settingsGetPointer(); | |
| 379 const SSettings* pStandard = settingsGetPointerStandard(); | |
| 380 | |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
381 /* Pointing to the old header data => set new data depending on what had been added since last version */ |
| 38 | 382 switch(pSettings->header) |
| 383 { | |
| 384 case 0xFFFF0000: | |
| 385 case 0xFFFF0001: | |
| 386 case 0xFFFF0002: | |
| 387 case 0xFFFF0003: | |
| 388 case 0xFFFF0004: | |
| 389 case 0xFFFF0005: | |
| 390 pSettings->ppo2sensors_deactivated = pStandard->ppo2sensors_deactivated; | |
| 391 pSettings->tX_colorscheme = pStandard->tX_colorscheme; | |
| 392 pSettings->tX_userselectedLeftLowerCornerPrimary = pStandard->tX_userselectedLeftLowerCornerPrimary; | |
| 393 pSettings->tX_userselectedLeftLowerCornerTimeout = pStandard->tX_userselectedLeftLowerCornerTimeout; | |
| 394 pSettings->tX_customViewPrimary = pStandard->tX_customViewPrimary; | |
| 395 pSettings->tX_customViewTimeout = pStandard->tX_customViewTimeout; | |
| 396 // no break | |
| 397 case 0xFFFF0006: | |
| 398 pSettings->timeoutEnterButtonSelectDive = pStandard->timeoutEnterButtonSelectDive; | |
| 399 pSettings->ButtonResponsiveness[0] = pStandard->ButtonResponsiveness[0]; | |
| 400 pSettings->ButtonResponsiveness[1] = pStandard->ButtonResponsiveness[1]; | |
| 401 pSettings->ButtonResponsiveness[2] = pStandard->ButtonResponsiveness[2]; | |
| 402 pSettings->ButtonResponsiveness[3] = pStandard->ButtonResponsiveness[3]; | |
| 403 pSettings->timeoutSurfacemode = pStandard->timeoutSurfacemode; | |
| 404 pSettings->timeoutMenuSurface = pStandard->timeoutMenuSurface; | |
| 405 pSettings->timeoutMenuDive = pStandard->timeoutMenuDive; | |
| 406 pSettings->timeoutMenuEdit = pStandard->timeoutMenuEdit; | |
| 407 pSettings->timeoutInfo = pStandard->timeoutInfo; | |
| 408 pSettings->timeoutInfoCompass = pStandard->timeoutInfoCompass; | |
| 409 pSettings->timeoutDiveReachedZeroDepth = pStandard->timeoutDiveReachedZeroDepth; | |
| 410 pSettings->divetimeToCreateLogbook = pStandard->divetimeToCreateLogbook; | |
| 411 pSettings->safetystopDuration = pStandard->safetystopDuration; // change from on/off to minutes | |
| 412 // no break | |
| 413 case 0xFFFF0007: | |
| 414 case 0xFFFF0008: | |
| 415 pSettings->alwaysShowPPO2 = pStandard->alwaysShowPPO2; | |
| 416 pSettings->logbookOffset = pStandard->logbookOffset; | |
| 417 // no break | |
| 418 case 0xFFFF0009: | |
| 419 pSettings->extraDisplay = pStandard->extraDisplay; | |
| 420 // no break | |
| 421 case 0xFFFF000A: | |
| 422 pSettings->display_toogle_desc = pStandard->display_toogle_desc; | |
| 423 // no break | |
| 424 case 0xFFFF000B: | |
| 425 pSettings->offsetPressure_mbar = pStandard->offsetPressure_mbar; | |
| 426 pSettings->offsetTemperature_centigrad = pStandard->offsetTemperature_centigrad; | |
| 427 pSettings->gasConsumption_travel_l_min = pStandard->gasConsumption_travel_l_min; | |
| 428 pSettings->gasConsumption_bottom_l_min = pStandard->gasConsumption_bottom_l_min; | |
| 429 pSettings->gasConsumption_deco_l_min = pStandard->gasConsumption_deco_l_min; | |
| 430 // no break | |
| 431 case 0xFFFF000C: | |
| 432 memcpy(pSettings->customtext, " hwOS 4\n\r" " welcome\n\r", 60); | |
| 433 // no break | |
| 434 case 0xFFFF000D: // nothing to do from 0xFFFF000D to 0xFFFF000E, just about header :-) | |
| 435 case 0xFFFF000E: | |
| 436 pSettings->debugModeOnStart = 0; | |
| 437 // no break | |
| 438 case 0xFFFF000F: | |
| 439 pSettings->compassBearing = 0; | |
| 440 // no break | |
| 441 case 0xFFFF0011: | |
| 442 pSettings->lastKnownBatteryPercentage = 0; | |
| 443 // no break | |
| 444 case 0xFFFF0012: | |
| 445 pSettings->buttonBalance[0] = 3; | |
| 446 pSettings->buttonBalance[1] = 3; | |
| 447 pSettings->buttonBalance[2] = 3; | |
| 448 // no break | |
| 449 case 0xFFFF0013: | |
| 450 case 0xFFFF0014: | |
| 451 pSettings->timeoutSurfacemodeWithSensors = pStandard->timeoutSurfacemodeWithSensors; | |
| 452 // no break | |
| 453 case 0xFFFF0015: | |
| 454 pSettings->ButtonResponsiveness[3] = pStandard->ButtonResponsiveness[3]; | |
| 455 settingsHelperButtonSens_keepPercentageValues(settingsHelperButtonSens_translate_hwOS_values_to_percentage(pSettings->ButtonResponsiveness[3]), pSettings->ButtonResponsiveness); | |
| 456 pSettings->VPM_model = 0; | |
| 457 pSettings->GF_model = 0; | |
| 458 // no break | |
| 459 case 0xFFFF0016: | |
| 460 pSettings->FactoryButtonBase = pStandard->FactoryButtonBase; | |
| 461 pSettings->FactoryButtonBalance[0] = pStandard->FactoryButtonBalance[0]; | |
| 462 pSettings->FactoryButtonBalance[1] = pStandard->FactoryButtonBalance[1]; | |
| 463 pSettings->FactoryButtonBalance[2] = pStandard->FactoryButtonBalance[2]; | |
| 464 // no break | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
465 case 0xFFFF0017: |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
466 pSettings->FlipDisplay = 0; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
467 // no break |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
468 case 0xFFFF0018: |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
469 pSettings->cv_configuration = 0xFFFFFFFF; |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
470 // no break |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
471 case 0xFFFF0019: |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
472 pSettings->MotionDetection = MOTION_DETECT_OFF; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
473 // no break |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
492
diff
changeset
|
474 case 0xFFFF001A: |
| 505 | 475 /* deactivate new views => to be activated by customer */ |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
492
diff
changeset
|
476 pSettings->cv_config_BigScreen = 0xFFFFFFFF; |
| 505 | 477 pSettings->cv_config_BigScreen &= pSettings->cv_configuration ^= 1 << CVIEW_T3_Navigation; |
| 478 pSettings->cv_config_BigScreen &= pSettings->cv_configuration ^= 1 << CVIEW_T3_DepthData; | |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
492
diff
changeset
|
479 // no break |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
480 case 0xFFFF001B: |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
481 pSettings->compassInertia = 0; /* no inertia */ |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
482 pSettings->tX_customViewPrimaryBF = CVIEW_T3_Decostop; |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
541
diff
changeset
|
483 pSettings->cv_config_BigScreen &= pSettings->cv_configuration ^= 1 << CVIEW_T3_DecoTTS; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
484 // no break |
| 546 | 485 case 0xFFFF001C: |
| 486 pSettings->viewPortMode = 0; | |
| 487 pSettings->viewRoll = 0; | |
| 488 pSettings->viewPitch = 0; | |
| 489 pSettings->viewYaw = 0; | |
| 490 // no break | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
491 case 0xFFFF001D: |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
492 pSettings->ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
493 pSettings->ppo2sensors_calibCoeff[0] = 0.0; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
494 pSettings->ppo2sensors_calibCoeff[1] = 0.0; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
495 pSettings->ppo2sensors_calibCoeff[2] = 0.0; |
| 662 | 496 pSettings->amPMTime = 0; |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
497 // no break |
| 662 | 498 case 0xFFFF001E: |
| 499 pSettings->autoSetpoint = 0; | |
| 710 | 500 pSettings->scrubTimerMax_Obsolete = 0; |
| 501 pSettings->scrubTimerCur_Obsolete = 0; | |
| 662 | 502 pSettings->scrubTimerMode = SCRUB_TIMER_OFF; |
| 503 // no break | |
| 504 case 0xFFFF001F: | |
| 505 pSettings->pscr_lung_ratio = 10; | |
| 506 pSettings->pscr_o2_drop = 4; | |
| 507 // no break | |
| 508 case 0xFFFF0020: | |
| 509 pSettings->co2_sensor_active = 0; | |
| 510 // no break; | |
| 687 | 511 case 0xFFFF0021: |
| 512 pSettings->ext_uart_protocol = 0; | |
| 513 // no break; | |
| 710 | 514 case 0xFFFF0022: |
| 515 pSettings->scubberActiveId = 0; | |
| 516 pSettings->scrubberData[0].TimerCur = pSettings->scrubTimerCur_Obsolete; | |
| 517 pSettings->scrubberData[0].TimerMax = pSettings->scrubTimerMax_Obsolete; | |
| 518 pSettings->scrubberData[0].lastDive.WeekDay = 0; | |
| 519 pSettings->scrubberData[0].lastDive.Month = 0; | |
| 520 pSettings->scrubberData[0].lastDive.Date = 0; | |
| 521 pSettings->scrubberData[0].lastDive.Year = 0; | |
| 522 | |
| 523 pSettings->scrubberData[1].TimerCur = 0; | |
| 524 pSettings->scrubberData[1].TimerMax = 0; | |
| 525 pSettings->scrubberData[1].lastDive.WeekDay = 0; | |
| 526 pSettings->scrubberData[1].lastDive.Month = 0; | |
| 527 pSettings->scrubberData[1].lastDive.Date = 0; | |
| 528 pSettings->scrubberData[1].lastDive.Year = 0; | |
| 529 // no break; | |
| 733 | 530 case 0xFFFF0023: pSettings->ext_sensor_map[0] = SENSOR_OPTIC; |
| 531 pSettings->ext_sensor_map[1] = SENSOR_OPTIC; | |
| 532 pSettings->ext_sensor_map[2] = SENSOR_OPTIC; | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
533 pSettings->ext_sensor_map[3] = SENSOR_NONE; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
534 pSettings->ext_sensor_map[4] = SENSOR_NONE; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
535 // no break; |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
536 case 0xFFFF0024: pSettings->buttonLockActive = 0; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
537 // no break; |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
538 case 0xFFFF0025: |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
539 pSettings->compassDeclinationDeg = pStandard->compassDeclinationDeg; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
540 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
541 // no break; |
| 38 | 542 default: |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
543 pSettings->header = pStandard->header; |
| 38 | 544 break; // no break before!! |
| 545 } | |
| 546 } | |
| 547 | |
| 548 | |
| 549 uint8_t newFirmwareVersionCheckViaSettings(void) | |
| 550 { | |
| 551 SSettings* pSettings = settingsGetPointer(); | |
| 552 | |
| 553 if(pSettings->header < 0xFFFF0014) // for the versions without firmwareVersion[] | |
| 554 return 1; | |
| 555 | |
| 556 if(pSettings->firmwareVersion[0] != firmware_FirmwareData.versionFirst) | |
| 557 return 1; | |
| 558 if(pSettings->firmwareVersion[1] != firmware_FirmwareData.versionSecond) | |
| 559 return 1; | |
| 560 if(pSettings->firmwareVersion[2] != firmware_FirmwareData.versionThird) | |
| 561 return 1; | |
| 562 if(pSettings->firmwareVersion[3] != firmware_FirmwareData.versionBeta) | |
| 563 return 1; | |
| 564 | |
| 565 return 0; | |
| 566 } | |
| 567 | |
| 568 | |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
569 void set_settings_button_to_factory_with_individual_buttonBalance(void) |
| 38 | 570 { |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
571 bool factoryBalanceSettingsValid = true; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
572 unsigned i = 0; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
573 while (factoryBalanceSettingsValid && i < 3) { |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
574 if (Settings.FactoryButtonBalance[i] < 2 || Settings.FactoryButtonBalance[i] > 5) { |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
575 factoryBalanceSettingsValid = false; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
576 } |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
577 |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
578 i++; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
579 } |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
580 if (factoryBalanceSettingsValid) { |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
581 for (i = 0; i < 3; i++) { |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
582 Settings.buttonBalance[i] = Settings.FactoryButtonBalance[i]; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
583 } |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
584 } |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
585 |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
586 uint8_t buttonResponsiveness = Settings.FactoryButtonBase; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
587 if (buttonResponsiveness < 70 || buttonResponsiveness > 110) { |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
588 buttonResponsiveness = SettingsStandard.ButtonResponsiveness[3]; |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
589 } |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
590 |
|
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
762
diff
changeset
|
591 settingsHelperButtonSens_keepPercentageValues(buttonResponsiveness, settingsGetPointer()->ButtonResponsiveness); |
| 38 | 592 } |
| 593 | |
| 594 | |
| 595 uint8_t check_and_correct_settings(void) | |
| 596 { | |
| 597 uint32_t corrections = 0; | |
| 598 uint8_t firstGasFoundOC = 0; | |
| 599 uint8_t firstGasFoundCCR = 0; | |
| 600 | |
| 662 | 601 |
| 602 settingsWarning = 0; /* reset warning indicator */ | |
| 603 | |
| 38 | 604 /* uint32_t header; |
| 605 */ | |
| 606 | |
| 607 /* uint8_t warning_blink_dsec; 1/10 seconds | |
| 608 */ | |
| 609 if((Settings.warning_blink_dsec < 1) || (Settings.warning_blink_dsec > 100)) | |
| 610 { | |
| 611 Settings.warning_blink_dsec = SettingsStandard.warning_blink_dsec; | |
| 612 corrections++; | |
| 613 } | |
| 614 | |
| 615 /* uint8_t lastDiveLogId; | |
| 616 */ | |
| 617 | |
| 618 /* uint32_t logFlashNextSampleStartAddress; | |
| 619 */ | |
| 620 if((Settings.logFlashNextSampleStartAddress < SAMPLESTART) || (Settings.logFlashNextSampleStartAddress > SAMPLESTOP)) | |
| 621 { | |
| 622 Settings.logFlashNextSampleStartAddress = SAMPLESTART; | |
| 623 corrections++; | |
| 624 } | |
| 625 | |
| 626 | |
| 627 /* uint8_t dive_mode; has to before the gases | |
| 628 */ | |
| 629 if( (Settings.dive_mode != DIVEMODE_OC) && | |
| 630 (Settings.dive_mode != DIVEMODE_CCR) && | |
| 631 (Settings.dive_mode != DIVEMODE_Gauge) && | |
| 662 | 632 (Settings.dive_mode != DIVEMODE_Apnea) && |
| 633 (Settings.dive_mode != DIVEMODE_PSCR)) | |
| 38 | 634 { |
| 635 Settings.dive_mode = DIVEMODE_OC; | |
| 636 corrections++; | |
| 637 } | |
| 638 | |
| 639 | |
| 640 /* SGasLine gas[1 + (2*NUM_GASES)]; | |
| 641 */ | |
| 642 for(int i=1; i<=2*NUM_GASES;i++) | |
| 643 { | |
| 644 if(Settings.gas[i].oxygen_percentage < 4) | |
| 645 { | |
| 646 Settings.gas[i].oxygen_percentage = 4; | |
| 647 corrections++; | |
| 648 } | |
| 649 if(Settings.gas[i].oxygen_percentage > 100) | |
| 650 { | |
| 651 Settings.gas[i].oxygen_percentage = 100; | |
| 652 corrections++; | |
| 653 } | |
| 654 if((Settings.gas[i].oxygen_percentage + Settings.gas[i].helium_percentage) > 100) | |
| 655 { | |
| 656 Settings.gas[i].helium_percentage = 100 - Settings.gas[i].oxygen_percentage; | |
| 657 corrections++; | |
| 658 } | |
| 659 if(Settings.gas[i].note.ub.deco) | |
| 660 { | |
| 661 if(Settings.gas[i].note.ub.active != 1) | |
| 662 { | |
| 663 Settings.gas[i].note.ub.active = 1; | |
| 664 corrections++; | |
| 665 } | |
| 666 if(Settings.gas[i].note.ub.travel == 1) | |
| 667 { | |
| 668 Settings.gas[i].note.ub.travel = 0; | |
| 669 corrections++; | |
| 670 } | |
| 671 } | |
| 672 if(Settings.gas[i].note.ub.travel) | |
| 673 { | |
| 674 if(Settings.gas[i].note.ub.active != 1) | |
| 675 { | |
| 676 Settings.gas[i].note.ub.active = 1; | |
| 677 corrections++; | |
| 678 } | |
| 679 if(Settings.gas[i].note.ub.deco == 1) | |
| 680 { | |
| 681 Settings.gas[i].note.ub.deco = 0; | |
| 682 corrections++; | |
| 683 } | |
| 684 } | |
| 685 if(Settings.gas[i].note.ub.first) | |
| 686 { | |
| 662 | 687 if(Settings.gas[i].note.ub.active != 1) |
| 38 | 688 { |
| 662 | 689 Settings.gas[i].note.ub.active = 1; |
| 38 | 690 corrections++; |
| 691 } | |
| 692 if(Settings.gas[i].note.ub.travel == 1) | |
| 693 { | |
| 694 Settings.gas[i].note.ub.travel = 0; | |
| 695 corrections++; | |
| 696 } | |
| 697 if(Settings.gas[i].note.ub.deco == 1) | |
| 698 { | |
| 699 Settings.gas[i].note.ub.deco = 0; | |
| 700 corrections++; | |
| 701 } | |
| 702 if((i<=NUM_GASES) && (!firstGasFoundOC)) | |
| 703 firstGasFoundOC = 1; | |
| 704 else | |
| 705 if((i>NUM_GASES) && (!firstGasFoundCCR)) | |
| 706 firstGasFoundCCR = 1; | |
| 707 else | |
| 708 Settings.gas[i].note.ub.first = 0; | |
| 709 } | |
| 710 if(Settings.gas[i].bottle_size_liter > 40) | |
| 711 { | |
| 712 Settings.gas[i].bottle_size_liter = 40; | |
| 713 corrections++; | |
| 714 } | |
| 715 if(Settings.gas[i].depth_meter > 250) | |
| 716 { | |
| 717 Settings.gas[i].depth_meter = 250; | |
| 718 corrections++; | |
| 719 } | |
| 720 if(Settings.gas[i].depth_meter_travel > 250) | |
| 721 { | |
| 722 Settings.gas[i].depth_meter_travel = 250; | |
| 723 corrections++; | |
| 724 } | |
| 725 /*if(Settings.gas[i].note.ub.senderCode) | |
| 726 { | |
| 727 } | |
| 728 if(Settings.gas[i].bottle_wireless_id) | |
| 729 { | |
| 730 } | |
| 731 */ | |
| 732 } // for(int i=1; i<=2*NUM_GASES;i++) | |
| 733 | |
| 734 if(!firstGasFoundOC) | |
| 735 { | |
| 736 Settings.gas[1].note.ub.active = 1; | |
| 737 Settings.gas[1].note.ub.first = 1; | |
| 738 Settings.gas[1].note.ub.travel = 0; | |
| 739 Settings.gas[1].note.ub.deco = 0; | |
| 662 | 740 corrections++; |
| 38 | 741 } |
| 742 if(!firstGasFoundCCR) | |
| 743 { | |
| 744 Settings.gas[1 + NUM_GASES].note.ub.active = 1; | |
| 745 Settings.gas[1 + NUM_GASES].note.ub.first = 1; | |
| 746 Settings.gas[1 + NUM_GASES].note.ub.travel = 0; | |
| 747 Settings.gas[1 + NUM_GASES].note.ub.deco = 0; | |
| 662 | 748 corrections++; |
| 38 | 749 } |
| 750 /* SSetpointLine setpoint[1 + NUM_GASES]; | |
| 751 */ | |
| 752 for(int i=1; i<=NUM_GASES;i++) | |
| 753 { | |
| 652 | 754 if(Settings.setpoint[i].setpoint_cbar < MIN_PPO2_SP_CBAR) |
| 38 | 755 { |
| 652 | 756 Settings.setpoint[i].setpoint_cbar = MIN_PPO2_SP_CBAR; |
| 38 | 757 corrections++; |
| 758 } | |
| 759 if(Settings.setpoint[i].setpoint_cbar > 160) | |
| 760 { | |
| 761 Settings.setpoint[i].setpoint_cbar = 160; | |
| 762 corrections++; | |
| 763 } | |
| 764 if(Settings.setpoint[i].depth_meter > 250) | |
| 765 { | |
| 766 Settings.setpoint[i].depth_meter = 250; | |
| 767 corrections++; | |
| 768 } | |
| 769 if(Settings.setpoint[i].note.ub.deco) | |
| 770 { | |
| 771 if(Settings.setpoint[i].note.ub.active != 1) | |
| 772 { | |
| 773 Settings.setpoint[i].note.ub.active = 1; | |
| 774 corrections++; | |
| 775 } | |
| 776 if(Settings.setpoint[i].note.ub.travel == 1) | |
| 777 { | |
| 778 Settings.setpoint[i].note.ub.travel = 0; | |
| 779 corrections++; | |
| 780 } | |
| 781 } | |
| 782 if(Settings.setpoint[i].note.ub.travel) | |
| 783 { | |
| 784 if(Settings.setpoint[i].note.ub.active != 1) | |
| 785 { | |
| 786 Settings.setpoint[i].note.ub.active = 1; | |
| 787 corrections++; | |
| 788 } | |
| 789 if(Settings.setpoint[i].note.ub.deco == 1) | |
| 790 { | |
| 791 Settings.setpoint[i].note.ub.deco = 0; | |
| 792 corrections++; | |
| 793 } | |
| 794 } | |
| 795 if(Settings.setpoint[i].note.ub.first) | |
| 796 { | |
| 797 if(Settings.setpoint[i].note.ub.active != 1) | |
| 798 { | |
| 799 Settings.setpoint[i].note.ub.active = 1; | |
| 800 corrections++; | |
| 801 } | |
| 802 if(Settings.setpoint[i].note.ub.travel == 1) | |
| 803 { | |
| 804 Settings.setpoint[i].note.ub.travel = 0; | |
| 805 corrections++; | |
| 806 } | |
| 807 if(Settings.setpoint[i].note.ub.deco == 1) | |
| 808 { | |
| 809 Settings.setpoint[i].note.ub.deco = 0; | |
| 810 corrections++; | |
| 811 } | |
| 812 } | |
| 813 } // for(int i=1; i<=NUM_GASES;i++) | |
| 814 | |
| 815 /* uint8_t CCR_Mode; | |
| 816 */ | |
| 817 if( (Settings.CCR_Mode != CCRMODE_Sensors) && | |
| 662 | 818 (Settings.CCR_Mode != CCRMODE_Simulation) && |
| 38 | 819 (Settings.CCR_Mode != CCRMODE_FixedSetpoint)) |
| 820 { | |
| 821 Settings.CCR_Mode = CCRMODE_FixedSetpoint; | |
| 822 corrections++; | |
| 823 } | |
| 824 | |
| 825 /* split2x4_Type deco_type; | |
| 826 */ | |
| 827 if( (Settings.deco_type.ub.standard != GF_MODE) && | |
| 828 (Settings.deco_type.ub.standard != VPM_MODE)) | |
| 829 { | |
| 830 Settings.deco_type.ub.standard = VPM_MODE; | |
| 831 corrections++; | |
| 832 } | |
| 833 if(Settings.deco_type.ub.alternative != GF_MODE) | |
| 834 { | |
| 835 Settings.deco_type.ub.alternative = GF_MODE; | |
| 836 corrections++; | |
| 837 } | |
| 838 | |
| 839 /* uint8_t ppO2_max_deco; | |
| 840 */ | |
| 841 if(Settings.ppO2_max_deco > 190) | |
| 842 { | |
| 843 Settings.ppO2_max_deco = 190; | |
| 844 corrections++; | |
| 845 } | |
| 846 if(Settings.ppO2_max_deco < 100) | |
| 847 { | |
| 848 Settings.ppO2_max_deco = 100; | |
| 849 corrections++; | |
| 850 } | |
| 851 | |
| 852 /* uint8_t ppO2_max_std; | |
| 853 */ | |
| 854 if(Settings.ppO2_max_std > 190) | |
| 855 { | |
| 856 Settings.ppO2_max_std = 190; | |
| 857 corrections++; | |
| 858 } | |
| 859 if(Settings.ppO2_max_std < 100) | |
| 860 { | |
| 861 Settings.ppO2_max_std = 100; | |
| 862 corrections++; | |
| 863 } | |
| 864 | |
| 865 /* uint8_t ppO2_min; | |
| 866 */ | |
| 867 if(Settings.ppO2_min != 15) | |
| 868 { | |
| 869 Settings.ppO2_min = 15; | |
| 870 corrections++; | |
| 871 } | |
| 872 | |
| 873 /* uint8_t CNS_max; | |
| 874 */ | |
| 875 if(Settings.CNS_max != 90) | |
| 876 { | |
| 877 Settings.CNS_max = 90; | |
| 878 corrections++; | |
| 879 } | |
| 880 | |
| 881 /* uint8_t ascent_MeterPerMinute_max; | |
| 882 */ | |
| 883 if(Settings.ascent_MeterPerMinute_max != 30) | |
| 884 { | |
| 885 Settings.ascent_MeterPerMinute_max = 30; | |
| 886 corrections++; | |
| 887 } | |
| 888 | |
| 889 /* uint8_t ascent_MeterPerMinute_showGraph; | |
| 890 */ | |
| 891 if(Settings.ascent_MeterPerMinute_showGraph != 30) | |
| 892 { | |
| 893 Settings.ascent_MeterPerMinute_showGraph = 30; | |
| 894 corrections++; | |
| 895 } | |
| 896 | |
| 897 /* uint8_t future_TTS; | |
| 898 */ | |
| 899 if(Settings.future_TTS > 15) | |
| 900 { | |
| 901 Settings.future_TTS = 15; | |
| 902 corrections++; | |
| 903 } | |
| 904 | |
| 905 /* uint8_t GF_high; | |
| 906 */ | |
| 907 if(Settings.GF_high > 99) | |
| 908 { | |
| 909 Settings.GF_high = 99; | |
| 910 corrections++; | |
| 911 } | |
| 912 if(Settings.GF_high < 45) | |
| 913 { | |
| 914 Settings.GF_high = 45; | |
| 915 corrections++; | |
| 916 } | |
| 917 | |
| 918 /* uint8_t GF_low; | |
| 919 */ | |
| 920 if(Settings.GF_low > 99) | |
| 921 { | |
| 922 Settings.GF_low = 99; | |
| 923 corrections++; | |
| 924 } | |
| 925 if(Settings.GF_low < 10) | |
| 926 { | |
| 927 Settings.GF_low = 10; | |
| 928 corrections++; | |
| 929 } | |
| 930 if(Settings.GF_low > Settings.GF_high) | |
| 931 { | |
| 932 Settings.GF_low = Settings.GF_high; | |
| 933 corrections++; | |
| 934 } | |
| 935 | |
| 936 /* uint8_t aGF_high; | |
| 937 */ | |
| 938 if(Settings.aGF_high > 99) | |
| 939 { | |
| 940 Settings.aGF_high = 99; | |
| 941 corrections++; | |
| 942 } | |
| 943 if(Settings.aGF_high < 45) | |
| 944 { | |
| 945 Settings.aGF_high = 45; | |
| 946 corrections++; | |
| 947 } | |
| 948 | |
| 949 /* uint8_t aGF_low; | |
| 950 */ | |
| 951 if(Settings.aGF_low > 99) | |
| 952 { | |
| 953 Settings.aGF_low = 99; | |
| 954 corrections++; | |
| 955 } | |
| 956 if(Settings.aGF_low < 10) | |
| 957 { | |
| 958 Settings.aGF_low = 10; | |
| 959 corrections++; | |
| 960 } | |
| 961 if(Settings.aGF_low > Settings.aGF_high) | |
| 962 { | |
| 963 Settings.aGF_low = Settings.aGF_high; | |
| 964 corrections++; | |
| 965 } | |
| 966 | |
| 967 /* split2x4_Type VPM_conservatism; | |
| 968 */ | |
| 969 if(Settings.VPM_conservatism.ub.standard > 5) | |
| 970 { | |
| 971 Settings.VPM_conservatism.ub.standard = 5; | |
| 972 corrections++; | |
| 973 } | |
| 974 if(Settings.VPM_conservatism.ub.alternative > 5) | |
| 975 { | |
| 976 Settings.VPM_conservatism.ub.alternative = 5; | |
| 977 corrections++; | |
| 978 } | |
| 979 | |
| 980 /* uint8_t safetystopDuration; | |
| 981 */ | |
| 982 if(Settings.safetystopDuration > 5) | |
| 983 { | |
| 984 Settings.safetystopDuration = 5; | |
| 985 corrections++; | |
| 986 } | |
| 987 | |
| 988 /* uint8_t AtemMinutenVolumenLiter; | |
| 989 */ | |
| 990 if(Settings.AtemMinutenVolumenLiter != 25) | |
| 991 { | |
| 992 Settings.AtemMinutenVolumenLiter = 25; | |
| 993 corrections++; | |
| 994 } | |
| 995 | |
| 996 /* uint8_t ReserveFractionDenominator; | |
| 997 */ | |
| 998 if(Settings.ReserveFractionDenominator != 4) | |
| 999 { | |
| 1000 Settings.ReserveFractionDenominator = 4; | |
| 1001 corrections++; | |
| 1002 } | |
| 1003 | |
| 1004 /* uint8_t salinity; | |
| 1005 */ | |
| 1006 if(Settings.salinity > 4) | |
| 1007 { | |
| 1008 Settings.salinity = 4; | |
| 1009 corrections++; | |
| 1010 } | |
| 1011 | |
| 1012 /* uint8_t last_stop_depth_meter; | |
| 1013 */ | |
| 1014 if(Settings.last_stop_depth_meter > 9) | |
| 1015 { | |
| 1016 Settings.last_stop_depth_meter = 9; | |
| 1017 corrections++; | |
| 1018 } | |
| 1019 if(Settings.last_stop_depth_meter < 3) | |
| 1020 { | |
| 1021 Settings.last_stop_depth_meter = 3; | |
| 1022 corrections++; | |
| 1023 } | |
| 1024 | |
| 1025 /* uint8_t stop_increment_depth_meter; | |
| 1026 */ | |
| 1027 if(Settings.stop_increment_depth_meter != 3) | |
| 1028 { | |
| 1029 Settings.stop_increment_depth_meter = 3; | |
| 1030 corrections++; | |
| 1031 } | |
| 1032 | |
| 1033 /* uint8_t brightness; | |
| 1034 */ | |
| 1035 if(Settings.brightness > 4) | |
| 1036 { | |
| 1037 Settings.brightness = 4; | |
| 1038 corrections++; | |
| 1039 } | |
| 1040 | |
| 1041 /* uint8_t date_format; | |
| 1042 */ | |
| 1043 if( (Settings.date_format != DDMMYY) && | |
| 1044 (Settings.date_format != MMDDYY) && | |
| 1045 (Settings.date_format != YYMMDD)) | |
| 1046 { | |
| 1047 Settings.date_format = DDMMYY; | |
| 1048 corrections++; | |
| 1049 } | |
| 1050 | |
| 1051 /* uint8_t selected_language; | |
| 1052 */ | |
| 1053 if(Settings.selected_language >= LANGUAGE_END) | |
| 1054 { | |
| 1055 Settings.selected_language = LANGUAGE_English; | |
| 1056 corrections++; | |
| 1057 } | |
| 1058 | |
| 1059 /* char customtext[60]; | |
| 1060 */ | |
| 1061 if(Settings.customtext[59] != 0) | |
| 1062 { | |
| 1063 Settings.customtext[59] = 0; | |
| 1064 corrections++; | |
| 1065 } | |
| 1066 | |
| 1067 /* uint16_t timeoutSurfacemode; | |
| 1068 */ | |
| 1069 if( (Settings.timeoutSurfacemode != 20) && // Quick Sleep Option | |
| 1070 (Settings.timeoutSurfacemode != 120)) | |
| 1071 { | |
| 1072 Settings.timeoutSurfacemode = 120; | |
| 1073 corrections++; | |
| 1074 } | |
| 1075 | |
| 1076 /* uint8_t timeoutMenuSurface; | |
| 1077 */ | |
| 1078 if(Settings.timeoutMenuSurface != 120) | |
| 1079 { | |
| 1080 Settings.timeoutMenuSurface = 120; | |
| 1081 corrections++; | |
| 1082 } | |
| 1083 | |
| 1084 /* uint8_t timeoutMenuDive; | |
| 1085 */ | |
| 1086 if(Settings.timeoutMenuDive != 120) | |
| 1087 { | |
| 1088 Settings.timeoutMenuDive = 120; | |
| 1089 corrections++; | |
| 1090 } | |
| 1091 | |
| 1092 /* uint8_t timeoutMenuEdit; | |
| 1093 */ | |
| 1094 if(Settings.timeoutMenuEdit != 120) | |
| 1095 { | |
| 1096 Settings.timeoutMenuEdit = 120; | |
| 1097 corrections++; | |
| 1098 } | |
| 1099 | |
| 1100 /* uint8_t timeoutInfo; | |
| 1101 */ | |
| 1102 if(Settings.timeoutInfo != 120) | |
| 1103 { | |
| 1104 Settings.timeoutInfo = 120; | |
| 1105 corrections++; | |
| 1106 } | |
| 1107 | |
| 1108 /* uint8_t timeoutInfoCompass; | |
| 1109 */ | |
| 1110 if(Settings.timeoutInfoCompass != 60) | |
| 1111 { | |
| 1112 Settings.timeoutInfoCompass = 60; | |
| 1113 corrections++; | |
| 1114 } | |
| 1115 | |
| 1116 /* uint8_t design; | |
| 1117 */ | |
| 1118 if(Settings.design != 7) | |
| 1119 { | |
| 1120 Settings.design = 7; | |
| 1121 corrections++; | |
| 1122 } | |
| 1123 | |
| 1124 /* uint16_t timeoutDiveReachedZeroDepth; | |
| 1125 */ | |
| 1126 if(Settings.timeoutDiveReachedZeroDepth != 300) | |
| 1127 { | |
| 1128 Settings.timeoutDiveReachedZeroDepth = 300; | |
| 1129 corrections++; | |
| 1130 } | |
| 1131 | |
| 1132 /* uint16_t divetimeToCreateLogbook; | |
| 1133 */ | |
| 1134 if(Settings.divetimeToCreateLogbook != 60) | |
| 1135 { | |
| 1136 Settings.divetimeToCreateLogbook = 60; | |
| 1137 corrections++; | |
| 1138 } | |
| 1139 | |
| 1140 /* uint8_t serialHigh; | |
| 1141 */ | |
| 1142 | |
| 1143 /* uint8_t serialLow; | |
| 1144 */ | |
| 1145 | |
| 1146 /* SUFirmware firmwareVersion16to32bit; | |
| 1147 */ | |
| 1148 | |
| 1149 /* uint32_t backup_localtime_rtc_tr; | |
| 1150 */ | |
| 1151 | |
| 1152 /* uint32_t backup_localtime_rtc_dr; | |
| 1153 */ | |
| 1154 | |
| 1155 /* uint16_t totalDiveCounter; | |
| 1156 */ | |
| 1157 | |
| 1158 /* uint16_t personalDiveCount; | |
| 1159 */ | |
| 1160 | |
| 1161 /* uint8_t showDebugInfo; | |
| 1162 */ | |
|
492
4ce932235578
Added compiler switch for existing debug view parameter
Ideenmodellierer
parents:
488
diff
changeset
|
1163 |
|
4ce932235578
Added compiler switch for existing debug view parameter
Ideenmodellierer
parents:
488
diff
changeset
|
1164 #ifdef HAVE_DEBUG_VIEW |
| 38 | 1165 if(Settings.showDebugInfo > 1) |
| 1166 { | |
| 1167 Settings.showDebugInfo = 0; | |
| 1168 corrections++; | |
| 1169 } | |
|
492
4ce932235578
Added compiler switch for existing debug view parameter
Ideenmodellierer
parents:
488
diff
changeset
|
1170 #else |
|
4ce932235578
Added compiler switch for existing debug view parameter
Ideenmodellierer
parents:
488
diff
changeset
|
1171 Settings.showDebugInfo = 0; |
|
4ce932235578
Added compiler switch for existing debug view parameter
Ideenmodellierer
parents:
488
diff
changeset
|
1172 #endif |
| 38 | 1173 |
| 1174 /* uint8_t ButtonResponsiveness[4]; | |
| 1175 */ | |
| 1176 // Base value, index 3 | |
| 93 | 1177 if(Settings.ButtonResponsiveness[3] < MIN_BUTTONRESPONSIVENESS_GUI) |
| 38 | 1178 { |
| 93 | 1179 Settings.ButtonResponsiveness[3] = MIN_BUTTONRESPONSIVENESS_GUI; |
| 38 | 1180 corrections++; |
| 1181 } | |
| 1182 else | |
| 151 | 1183 if(Settings.ButtonResponsiveness[3] > MAX_BUTTONRESPONSIVENESS_GUI) |
| 38 | 1184 { |
| 151 | 1185 Settings.ButtonResponsiveness[3] = MAX_BUTTONRESPONSIVENESS_GUI; |
| 38 | 1186 corrections++; |
| 1187 } | |
| 1188 // flex values 0, 1, 2 | |
| 1189 for(int i=0; i<3;i++) | |
| 1190 { | |
| 93 | 1191 if(Settings.ButtonResponsiveness[i] < MIN_BUTTONRESPONSIVENESS) // 50-10 //Fix for broken buttons. :) |
| 38 | 1192 { |
| 93 | 1193 Settings.ButtonResponsiveness[i] = MIN_BUTTONRESPONSIVENESS; |
| 38 | 1194 corrections++; |
| 1195 } | |
| 1196 else | |
| 93 | 1197 if(Settings.ButtonResponsiveness[i] > MAX_BUTTONRESPONSIVENESS) // 110+20 |
| 38 | 1198 { |
| 93 | 1199 Settings.ButtonResponsiveness[i] = MAX_BUTTONRESPONSIVENESS; |
| 38 | 1200 corrections++; |
| 1201 } | |
| 1202 } | |
| 1203 | |
| 1204 /* uint8_t buttonBalance[3]; | |
| 1205 */ | |
| 1206 for(int i=0; i<3;i++) | |
| 1207 { | |
| 1208 if(Settings.buttonBalance[i] < 2) // 2 = -10 | |
| 1209 { | |
| 1210 Settings.buttonBalance[i] = 2; | |
| 1211 corrections++; | |
| 1212 } | |
| 1213 else | |
| 1214 if(Settings.buttonBalance[i] > 5) // 3 = 0, 4 = +10, 5 = +20 | |
| 1215 { | |
| 1216 Settings.buttonBalance[i] = 5; | |
| 1217 corrections++; | |
| 1218 } | |
| 1219 } | |
| 1220 | |
| 1221 /* uint8_t nonMetricalSystem; | |
| 1222 */ | |
| 1223 if(Settings.nonMetricalSystem > 1) | |
| 1224 { | |
| 1225 Settings.nonMetricalSystem = 1; | |
| 1226 corrections++; | |
| 1227 } | |
| 1228 | |
| 1229 /* uint8_t fallbackToFixedSetpoint; | |
| 1230 */ | |
| 1231 if(Settings.fallbackToFixedSetpoint > 1) | |
| 1232 { | |
| 1233 Settings.fallbackToFixedSetpoint = 1; | |
| 1234 corrections++; | |
| 1235 } | |
| 1236 | |
| 1237 /* uint8_t bluetoothActive; | |
| 1238 */ | |
| 1239 if(Settings.bluetoothActive > 1) | |
| 1240 { | |
| 1241 Settings.bluetoothActive = 1; | |
| 1242 corrections++; | |
| 1243 } | |
| 1244 | |
| 1245 /* uint8_t safetystopDepth; | |
| 1246 */ | |
| 1247 if(Settings.safetystopDepth > 6) | |
| 1248 { | |
| 1249 Settings.safetystopDepth = 6; | |
| 1250 corrections++; | |
| 1251 } | |
| 1252 if(Settings.safetystopDepth < 3) | |
| 1253 { | |
| 1254 Settings.safetystopDepth = 3; | |
| 1255 corrections++; | |
| 1256 } | |
| 1257 | |
| 1258 /* uint32_t updateSettingsAllowedFromHeader; | |
| 1259 */ | |
| 1260 | |
| 1261 /* uint8_t ppo2sensors_deactivated; | |
| 1262 */ | |
| 1263 if(Settings.ppo2sensors_deactivated > (1+2+4)) | |
| 1264 { | |
| 1265 Settings.ppo2sensors_deactivated = 0; | |
| 1266 corrections++; | |
| 1267 } | |
| 1268 | |
| 1269 /* uint8_t tX_colorscheme; | |
| 1270 */ | |
| 1271 if(Settings.tX_colorscheme > 3) | |
| 1272 { | |
| 1273 Settings.tX_colorscheme = 0; | |
| 1274 corrections++; | |
| 1275 } | |
| 1276 | |
| 1277 /* uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 1278 */ | |
|
443
a5101c688b49
Introduced enum for lower left corner view selection:
ideenmodellierer
parents:
439
diff
changeset
|
1279 if(Settings.tX_userselectedLeftLowerCornerPrimary >= LLC_END) |
| 38 | 1280 { |
|
443
a5101c688b49
Introduced enum for lower left corner view selection:
ideenmodellierer
parents:
439
diff
changeset
|
1281 Settings.tX_userselectedLeftLowerCornerPrimary = LLC_Temperature; |
| 38 | 1282 corrections++; |
| 1283 } | |
| 1284 | |
| 1285 /* uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 1286 */ | |
| 1287 if(Settings.tX_userselectedLeftLowerCornerTimeout > 60) | |
| 1288 { | |
| 1289 Settings.tX_userselectedLeftLowerCornerTimeout = 0; | |
| 1290 corrections++; | |
| 1291 } | |
| 1292 | |
| 1293 /* uint8_t tX_customViewPrimary; | |
| 1294 */ | |
| 1295 if(Settings.tX_customViewPrimary >= CVIEW_END) | |
| 1296 { | |
| 1297 Settings.tX_customViewPrimary = 1; | |
| 1298 corrections++; | |
| 1299 } | |
| 1300 | |
| 1301 /* uint8_t tX_customViewTimeout; | |
| 1302 */ | |
| 1303 if(Settings.tX_customViewTimeout > 60) | |
| 1304 { | |
| 1305 Settings.tX_customViewTimeout = 0; | |
| 1306 corrections++; | |
| 1307 } | |
| 1308 | |
| 1309 /* uint8_t timeoutEnterButtonSelectDive; | |
| 1310 */ | |
| 1311 if(Settings.timeoutEnterButtonSelectDive != 10) | |
| 1312 { | |
| 1313 Settings.timeoutEnterButtonSelectDive = 10; | |
| 1314 corrections++; | |
| 1315 } | |
| 1316 | |
| 1317 /* uint8_t logbookOffset; | |
| 1318 */ | |
| 1319 if(Settings.logbookOffset > 9000) | |
| 1320 { | |
| 1321 Settings.logbookOffset = 0; | |
| 1322 corrections++; | |
| 1323 } | |
| 1324 | |
| 1325 /* uint8_t alwaysShowPPO2; | |
| 1326 */ | |
| 1327 if(Settings.alwaysShowPPO2 > 1) | |
| 1328 { | |
| 1329 Settings.alwaysShowPPO2 = 0; | |
| 1330 corrections++; | |
| 1331 } | |
| 1332 | |
| 1333 /* uint8_t extraDisplay; | |
| 1334 */ | |
| 1335 if(Settings.extraDisplay >= EXTRADISPLAY_END) | |
| 1336 { | |
| 1337 Settings.extraDisplay = EXTRADISPLAY_BIGFONT; | |
| 1338 corrections++; | |
| 1339 } | |
| 1340 | |
| 1341 /* int8_t offsetPressure_mbar; | |
| 1342 */ | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1343 if((Settings.offsetPressure_mbar > PRESSURE_OFFSET_LIMIT_MBAR) || |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1344 (Settings.offsetPressure_mbar < -1 * PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1345 { |
| 1346 Settings.offsetPressure_mbar = 0; | |
| 1347 corrections++; | |
| 1348 } | |
| 1349 | |
| 1350 /* int8_t offsetTemperature_centigrad; | |
| 1351 */ | |
| 1352 if((Settings.offsetTemperature_centigrad > 20) || | |
| 1353 (Settings.offsetTemperature_centigrad < -20)) | |
| 1354 { | |
| 1355 Settings.offsetTemperature_centigrad = 0; | |
| 1356 corrections++; | |
| 1357 } | |
| 1358 | |
| 1359 /* uint8_t gasConsumption_travel_l_min; | |
| 1360 */ | |
| 1361 if((Settings.gasConsumption_travel_l_min < 5) || | |
| 1362 (Settings.gasConsumption_travel_l_min > 50)) | |
| 1363 { | |
| 1364 Settings.gasConsumption_travel_l_min = 20; | |
| 1365 corrections++; | |
| 1366 } | |
| 1367 | |
| 1368 /* uint8_t gasConsumption_bottom_l_min; | |
| 1369 */ | |
| 1370 if((Settings.gasConsumption_bottom_l_min < 5) || | |
| 1371 (Settings.gasConsumption_bottom_l_min > 50)) | |
| 1372 { | |
| 1373 Settings.gasConsumption_bottom_l_min = 20; | |
| 1374 corrections++; | |
| 1375 } | |
| 1376 | |
| 1377 /* uint8_t gasConsumption_deco_l_min; | |
| 1378 */ | |
| 1379 if((Settings.gasConsumption_deco_l_min < 5) || | |
| 1380 (Settings.gasConsumption_deco_l_min > 50)) | |
| 1381 { | |
| 1382 Settings.gasConsumption_deco_l_min = 20; | |
| 1383 corrections++; | |
| 1384 } | |
| 1385 | |
| 1386 /* uint8_t showDebugInfo; | |
| 1387 */ | |
| 1388 #ifdef BOOT16 | |
| 1389 Settings.showDebugInfo = 0; | |
| 1390 #else | |
| 1391 if(Settings.showDebugInfo > 1) | |
| 1392 Settings.showDebugInfo = 0; | |
| 1393 | |
| 1394 #endif | |
| 1395 | |
| 1396 /* uint8_t selected_language; | |
| 1397 */ | |
| 1398 #ifdef BOOT16 | |
| 1399 if(Settings.selected_language > 1) | |
| 1400 Settings.selected_language = 0; | |
| 1401 #else | |
| 1402 if(Settings.selected_language > 4) | |
| 1403 Settings.selected_language = 0; | |
| 1404 #endif | |
| 1405 | |
| 1406 | |
| 1407 /* uint8_t display_toogle_desc; 1/10 seconds | |
| 1408 */ | |
| 1409 if((Settings.display_toogle_desc < 20) || (Settings.display_toogle_desc > 600)) | |
| 1410 { | |
| 1411 Settings.display_toogle_desc = SettingsStandard.display_toogle_desc; | |
| 1412 corrections++; | |
| 1413 } | |
| 1414 | |
| 1415 /* uint8_t debugModeOnStart; | |
| 1416 */ | |
| 1417 if(Settings.debugModeOnStart > 1) | |
| 1418 { | |
| 1419 Settings.debugModeOnStart = 0; | |
| 1420 corrections++; | |
| 1421 } | |
| 1422 | |
| 1423 | |
| 1424 /* uint8_t IAmStolenPleaseKillMe; | |
| 1425 */ | |
| 1426 | |
| 1427 if(hardwareDataGetPointer()->primarySerial == 90) | |
| 1428 Settings.IAmStolenPleaseKillMe++; | |
| 1429 else | |
| 1430 Settings.IAmStolenPleaseKillMe = 0; | |
| 1431 | |
| 1432 | |
| 1433 /* uint8_t debugModeOnStart; | |
| 1434 */ | |
| 1435 if(Settings.compassBearing > 360) | |
| 1436 { | |
| 1437 Settings.compassBearing = 0; | |
| 1438 corrections++; | |
| 1439 } | |
| 1440 | |
| 1441 | |
| 1442 /* uint8_t lastKnownBatteryPercentage; | |
| 1443 */ | |
| 1444 if(Settings.lastKnownBatteryPercentage > 100) | |
| 1445 { | |
| 1446 Settings.lastKnownBatteryPercentage = 100; | |
| 1447 corrections++; | |
| 1448 } | |
| 1449 | |
| 1450 /* uint8_t VPM_model | |
| 1451 */ | |
| 1452 if((Settings.VPM_model != VPM_FROM_FORTRAN) && (Settings.VPM_model != VPM_BACHELORWORK)) | |
| 1453 { | |
| 1454 Settings.VPM_model = VPM_FROM_FORTRAN; | |
| 1455 corrections++; | |
| 1456 } | |
| 1457 | |
| 1458 /* uint8_t Buehlmann_model | |
| 1459 */ | |
| 1460 if((Settings.GF_model != BUEHLMANN_OSTC4) && (Settings.GF_model != BUEHLMANN_hwOS)) | |
| 1461 { | |
| 1462 Settings.GF_model = BUEHLMANN_OSTC4; | |
| 1463 corrections++; | |
| 1464 } | |
| 1465 | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1466 if(Settings.FlipDisplay > 1) /* only boolean values allowed */ |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1467 { |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1468 Settings.FlipDisplay = 0; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1469 corrections++; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1470 } |
| 522 | 1471 |
| 1472 #ifdef ENABLE_MOTION_CONTROL | |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
1473 if(Settings.MotionDetection >= MOTION_DETECT_END) |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1474 { |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
1475 Settings.MotionDetection = MOTION_DETECT_OFF; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1476 corrections++; |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1477 } |
| 522 | 1478 #else |
| 1479 Settings.MotionDetection = MOTION_DETECT_OFF; | |
|
550
af1c3e3abd5f
Make sure motion detection settings are set to default values:
Ideenmodellierer
parents:
546
diff
changeset
|
1480 Settings.viewPortMode = 0; |
|
af1c3e3abd5f
Make sure motion detection settings are set to default values:
Ideenmodellierer
parents:
546
diff
changeset
|
1481 Settings.viewRoll = 0.0; |
|
af1c3e3abd5f
Make sure motion detection settings are set to default values:
Ideenmodellierer
parents:
546
diff
changeset
|
1482 Settings.viewPitch = 0.0; |
|
af1c3e3abd5f
Make sure motion detection settings are set to default values:
Ideenmodellierer
parents:
546
diff
changeset
|
1483 Settings.viewYaw = 0.0; |
| 522 | 1484 #endif |
| 38 | 1485 |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1486 if(Settings.compassInertia > MAX_COMPASS_COMP) |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1487 { |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1488 Settings.compassInertia = 0; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1489 corrections++; |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1490 } |
|
541
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
1491 if(Settings.tX_customViewPrimaryBF > CVIEW_T3_END) |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
1492 { |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
1493 Settings.tX_customViewPrimaryBF = CVIEW_T3_Decostop; |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
1494 corrections++; |
|
6fbf7cd391cb
Added default view selection and auto return to view to t3 visualization:
Ideenmodellierer
parents:
539
diff
changeset
|
1495 } |
| 546 | 1496 if(Settings.viewPortMode > MAX_VIEWPORT_MODE) |
| 1497 { | |
| 1498 Settings.viewPortMode = 0; | |
| 1499 corrections++; | |
| 1500 } | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1501 if(Settings.ppo2sensors_source >= O2_SENSOR_SOURCE_MAX) |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1502 { |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1503 Settings.ppo2sensors_source = O2_SENSOR_SOURCE_OPTIC; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1504 Settings.ppo2sensors_calibCoeff[0] = 0.0; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1505 Settings.ppo2sensors_calibCoeff[1] = 0.0; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1506 Settings.ppo2sensors_calibCoeff[2] = 0.0; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1507 corrections++; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
1508 } |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
533
diff
changeset
|
1509 |
| 567 | 1510 if(Settings.amPMTime > 1) /* only boolean values allowed */ |
| 1511 { | |
| 1512 Settings.amPMTime = 0; | |
| 1513 corrections++; | |
| 1514 } | |
| 650 | 1515 |
| 1516 if(Settings.autoSetpoint > 1) /* only boolean values allowed */ | |
| 1517 { | |
| 1518 Settings.autoSetpoint = 0; | |
| 1519 corrections++; | |
| 1520 } | |
| 1521 | |
| 710 | 1522 if(Settings.scubberActiveId > 1) |
| 1523 { | |
| 1524 Settings.scubberActiveId = 0; | |
| 1525 corrections++; | |
| 1526 } | |
| 761 | 1527 if((Settings.scrubberData[0].TimerMax > MAX_SCRUBBER_TIME) || Settings.scrubberData[0].TimerCur < MIN_SCRUBBER_TIME || Settings.scrubberData[0].TimerCur > (int16_t)MAX_SCRUBBER_TIME) |
| 650 | 1528 { |
| 710 | 1529 Settings.scrubberData[0].TimerMax = 0; |
| 1530 Settings.scrubberData[0].TimerCur = 0; | |
| 1531 corrections++; | |
| 1532 } | |
| 761 | 1533 if((Settings.scrubberData[1].TimerMax > MAX_SCRUBBER_TIME) || Settings.scrubberData[1].TimerCur < MIN_SCRUBBER_TIME || Settings.scrubberData[1].TimerCur > (int16_t)MAX_SCRUBBER_TIME) |
| 710 | 1534 { |
| 1535 Settings.scrubberData[1].TimerMax = 0; | |
| 1536 Settings.scrubberData[1].TimerCur = 0; | |
| 650 | 1537 corrections++; |
| 1538 } | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
1539 if(Settings.scrubTimerMode > SCRUB_TIMER_END) |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
1540 { |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
1541 Settings.scrubTimerMode = SCRUB_TIMER_OFF; |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
1542 corrections++; |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
1543 } |
| 662 | 1544 |
| 1545 if((Settings.pscr_lung_ratio > PSCR_MAX_LUNG_RATIO) || (Settings.pscr_lung_ratio < PSCR_MIN_LUNG_RATIO)) | |
| 1546 { | |
| 1547 Settings.pscr_lung_ratio = 10; | |
| 1548 corrections++; | |
| 1549 } | |
| 1550 if(Settings.pscr_o2_drop > PSCR_MAX_O2_DROP) | |
| 1551 { | |
| 1552 Settings.pscr_o2_drop = 4; | |
| 1553 corrections++; | |
| 1554 } | |
| 1555 | |
| 1556 if(Settings.co2_sensor_active > 1) | |
| 1557 { | |
| 1558 Settings.co2_sensor_active = 0; | |
| 1559 corrections++; | |
| 1560 } | |
| 710 | 1561 if(Settings.ext_uart_protocol > UART_MAX_PROTOCOL) |
| 687 | 1562 { |
| 1563 Settings.ext_uart_protocol = 0; | |
| 1564 corrections++; | |
| 1565 } | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1566 if((Settings.ext_sensor_map[0] >= SENSOR_END) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1567 || (Settings.ext_sensor_map[1] >= SENSOR_END) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1568 || (Settings.ext_sensor_map[2] >= SENSOR_END) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1569 || (Settings.ext_sensor_map[3] >= SENSOR_END) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1570 || (Settings.ext_sensor_map[4] >= SENSOR_END)) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1571 { |
| 733 | 1572 Settings.ext_sensor_map[0] = SENSOR_OPTIC; |
| 1573 Settings.ext_sensor_map[1] = SENSOR_OPTIC; | |
| 1574 Settings.ext_sensor_map[2] = SENSOR_OPTIC; | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1575 Settings.ext_sensor_map[3] = SENSOR_NONE; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1576 Settings.ext_sensor_map[4] = SENSOR_NONE; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1577 corrections++; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
715
diff
changeset
|
1578 } |
| 662 | 1579 |
|
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1580 if(Settings.buttonLockActive > 1) |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1581 { |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1582 Settings.buttonLockActive = 1; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1583 corrections++; |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1584 } |
|
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
733
diff
changeset
|
1585 |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1586 if (Settings.compassDeclinationDeg > 99) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1587 Settings.compassDeclinationDeg = 99; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1588 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1589 corrections++; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1590 } else if (Settings.compassDeclinationDeg < -99) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1591 Settings.compassDeclinationDeg = -99; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1592 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1593 corrections++; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1594 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
768
diff
changeset
|
1595 |
| 662 | 1596 if(corrections) |
| 1597 { | |
| 1598 settingsWarning = 1; | |
| 1599 } | |
| 1600 else | |
| 1601 | |
| 38 | 1602 if(corrections > 255) |
| 662 | 1603 { |
| 1604 corrections = 255; | |
| 1605 } | |
| 1606 | |
| 1607 return (uint8_t)corrections; | |
| 38 | 1608 } |
| 1609 | |
| 1610 | |
| 1611 /* always at 0x8080000, do not move -> bootloader access */ | |
| 1612 const SFirmwareData* firmwareDataGetPointer(void) | |
| 1613 { | |
| 1614 return &firmware_FirmwareData; | |
| 1615 } | |
| 1616 | |
| 1617 | |
| 1618 #ifndef SPECIALPROGRAMM | |
| 1619 const SHardwareData* hardwareDataGetPointer(void) | |
| 1620 { | |
| 1621 return (SHardwareData *)HARDWAREDATA_ADDRESS; | |
| 1622 } | |
| 1623 #endif | |
| 1624 | |
| 1625 const SSettings* settingsGetPointerStandard(void) | |
| 1626 { | |
| 1627 return &SettingsStandard; | |
| 1628 } | |
| 1629 | |
| 1630 | |
| 1631 void hardwareBatchCode(uint8_t *high, uint8_t *low) | |
| 1632 { | |
| 1633 if(high) | |
| 1634 { | |
| 1635 *high = (uint8_t)((hardwareDataGetPointer()->production_year - 16) * 16); | |
| 1636 *high += hardwareDataGetPointer()->production_month; | |
| 1637 if(low) | |
| 1638 { | |
| 1639 *low = (uint8_t)(hardwareDataGetPointer()->production_day * 8); | |
| 1640 } | |
| 1641 } | |
| 1642 } | |
| 1643 | |
| 1644 | |
| 1645 uint8_t firmwareVersion_16bit_high(void) | |
| 1646 { | |
|
319
d8e86af78474
bugfix: correct packed main version number in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
286
diff
changeset
|
1647 return ((firmware_FirmwareData.versionFirst & 0x1F) << 3) + ((firmware_FirmwareData.versionSecond & 0x1C) >> 2); |
| 38 | 1648 } |
| 1649 | |
| 1650 uint8_t firmwareVersion_16bit_low(void) | |
| 1651 { | |
| 1652 return ((firmware_FirmwareData.versionSecond & 0x03) << 6) + ((firmware_FirmwareData.versionThird & 0x1F) << 1) + (firmware_FirmwareData.versionBeta & 0x01); | |
| 1653 } | |
| 1654 | |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1655 inline SSettings* settingsGetPointer(void) |
| 38 | 1656 { |
| 1657 return &Settings; | |
| 1658 } | |
| 1659 | |
| 1660 | |
| 1661 // =============================================================================== | |
| 1662 // set_settings_to_Standard | |
| 1663 /// @brief This function overwrites the current settings of the system | |
| 1664 /// with the EXCEPTION of the personalDiveCount | |
| 1665 /// | |
| 1666 /// It additionally calls set_new_settings_missing_in_ext_flash() and | |
| 1667 /// check_and_correct_settings(), even so this shouldn't be necessary. | |
| 1668 /// It is called on every start and from Reset All. | |
| 1669 /// | |
| 1670 /// 160622 added lastDiveLogIdBackup | |
| 1671 /// | |
| 1672 // =============================================================================== | |
| 1673 void set_settings_to_Standard(void) | |
| 1674 { | |
| 1675 SSettings *pSettings; | |
| 1676 const SSettings *pSettingsStandard; | |
| 1677 uint16_t personalDiveCountBackup; | |
| 1678 uint8_t lastDiveLogIdBackup; | |
| 1679 pSettings = settingsGetPointer(); | |
| 1680 pSettingsStandard = settingsGetPointerStandard(); | |
| 1681 | |
| 1682 personalDiveCountBackup = pSettings->personalDiveCount; | |
| 1683 lastDiveLogIdBackup = pSettings->lastDiveLogId; | |
| 1684 memcpy(pSettings,pSettingsStandard,sizeof(*pSettings)); | |
| 1685 pSettings->personalDiveCount = personalDiveCountBackup; | |
| 1686 pSettings->lastDiveLogId = lastDiveLogIdBackup; | |
| 1687 | |
| 1688 pSettings->firmwareVersion[0] = firmware_FirmwareData.versionFirst; | |
| 1689 pSettings->firmwareVersion[1] = firmware_FirmwareData.versionSecond; | |
| 1690 pSettings->firmwareVersion[2] = firmware_FirmwareData.versionThird; | |
| 1691 pSettings->firmwareVersion[3] = firmware_FirmwareData.versionBeta; | |
| 1692 | |
| 1693 set_new_settings_missing_in_ext_flash(); | |
| 1694 check_and_correct_settings(); | |
| 1695 // has to be called too: createDiveSettings(); | |
| 1696 } | |
| 1697 | |
| 1698 | |
| 1699 // =============================================================================== | |
| 1700 // mod_settings_for_first_start_with_empty_ext_flash | |
| 1701 /// @brief This function overwrites some settings of the system | |
| 1702 /// It is called on every start. | |
| 1703 /// Those settings will be overwriten by ext_flash_read_settings() | |
| 1704 /// Will be kept if ext_flash_read_settings() is invalid because | |
| 1705 /// it is still empty. | |
| 1706 /// | |
| 1707 // =============================================================================== | |
| 1708 void mod_settings_for_first_start_with_empty_ext_flash(void) | |
| 1709 { | |
| 1710 settingsGetPointer()->debugModeOnStart = 1; // | |
| 1711 } | |
| 1712 | |
| 1713 | |
| 1714 | |
| 1715 // =============================================================================== | |
| 1716 // hwOS4_to_hwOS_GasType | |
| 1717 /// @brief Helper for get gas / diluent | |
| 1718 /// | |
| 1719 // =============================================================================== | |
| 1720 uint8_t hwOS4_to_hwOS_GasType(uint8_t inOSTC4style) | |
| 1721 { | |
| 1722 switch(inOSTC4style) | |
| 1723 { | |
| 1724 case (1+2): // first | |
| 1725 case (2): // first | |
| 1726 return 1; // hwOS style first | |
| 1727 case (1+4): // deco | |
| 1728 case (4): // deco | |
| 1729 return 3; // hwOS style deco | |
| 1730 case (1+8): // travel | |
| 1731 case (8): // travel | |
| 1732 return 2; // hwOS style travel | |
| 1733 default: | |
| 1734 return 0; // hwOS style Disabled | |
| 1735 } | |
| 1736 } | |
| 1737 | |
| 1738 | |
| 1739 // =============================================================================== | |
| 1740 // hwOS_to_hwOS4_GasType | |
| 1741 /// @brief Helper for set gas / diluent | |
| 1742 /// | |
| 1743 // =============================================================================== | |
| 1744 uint8_t hwOS_to_hwOS4_GasType(uint8_t inOSTC4style) | |
| 1745 { | |
| 1746 switch(inOSTC4style) | |
| 1747 { | |
| 1748 case (1): // first | |
| 1749 return 1+2; // hwOS4 style first | |
| 1750 case (2): // travel (normal for diluent) | |
| 1751 return 1+8; // hwOS4 style travel | |
| 1752 case (3): // deco | |
| 1753 return 1+4; // hwOS4 style deco | |
| 1754 default: | |
| 1755 return 0; // hwOS4 style inactive | |
| 1756 } | |
| 1757 } | |
| 1758 | |
| 1759 | |
| 1760 | |
| 1761 // =============================================================================== | |
| 1762 // setGas | |
| 1763 /// @brief This function overwrites one gas, including mode and deco depth, | |
| 1764 /// it returns 0x4D prompt which is not used by writeData() that calls it. | |
| 1765 /// | |
| 1766 /// @param i the gas id from 1 to 5 for OC and 6 to 10 for CCR, 0 is the extra gas | |
| 1767 /// @param *data 5 bytes with the first the command to call setGas and the four | |
| 1768 /// following bytes to define oxygen, helium, mode and deco depth | |
| 1769 /// | |
| 1770 /// @return 0x4D (prompt that is not used) | |
| 1771 // =============================================================================== | |
| 1772 uint8_t setGas(int i,uint8_t * data) | |
| 1773 { | |
| 1774 if(!checkValue(data[1],4,100)) | |
| 1775 return ERROR_; | |
| 1776 if(!checkValue(data[4],0,250)) | |
| 1777 return ERROR_; | |
| 1778 | |
| 1779 Settings.gas[i].oxygen_percentage = data[1]; | |
| 1780 Settings.gas[i].helium_percentage = data[2]; | |
| 1781 Settings.gas[i].note.uw = hwOS_to_hwOS4_GasType(data[3]); | |
| 1782 Settings.gas[i].depth_meter = data[4]; | |
| 1783 return 0x4d; | |
| 1784 } | |
| 1785 | |
| 1786 | |
| 1787 uint8_t getGas(int i,uint8_t * data) | |
| 1788 { | |
| 1789 data[0] = Settings.gas[i].oxygen_percentage; | |
| 1790 data[1] = Settings.gas[i].helium_percentage; | |
| 1791 data[2] = hwOS4_to_hwOS_GasType(Settings.gas[i].note.uw); | |
| 1792 data[3] = Settings.gas[i].depth_meter; | |
| 1793 return 0x4d; | |
| 1794 } | |
| 1795 | |
| 1796 uint8_t setDiluent(int i,uint8_t * data) | |
| 1797 { | |
| 1798 if(!checkValue(data[1],4,100)) | |
| 1799 return ERROR_; | |
| 1800 if(!checkValue(data[4],0,250)) | |
| 1801 return ERROR_; | |
| 1802 | |
| 1803 Settings.gas[NUM_OFFSET_DILUENT + i].oxygen_percentage = data[1]; | |
| 1804 Settings.gas[NUM_OFFSET_DILUENT + i].helium_percentage = data[2]; | |
| 1805 Settings.gas[NUM_OFFSET_DILUENT + i].note.uw = hwOS_to_hwOS4_GasType(data[3]); | |
| 1806 Settings.gas[NUM_OFFSET_DILUENT + i].depth_meter = data[4]; | |
| 1807 return 0x4d; | |
| 1808 } | |
| 1809 | |
| 1810 uint8_t getDiluent(int i,uint8_t * data) | |
| 1811 { | |
| 1812 data[0] = Settings.gas[NUM_OFFSET_DILUENT + i].oxygen_percentage; | |
| 1813 data[1] = Settings.gas[NUM_OFFSET_DILUENT + i].helium_percentage; | |
| 1814 data[2] = hwOS4_to_hwOS_GasType(Settings.gas[NUM_OFFSET_DILUENT + i].note.uw); | |
| 1815 data[3] = Settings.gas[NUM_OFFSET_DILUENT + i].depth_meter; | |
| 1816 return 0x4d; | |
| 1817 } | |
| 1818 | |
| 1819 uint8_t setSetpoint(int i,uint8_t * data) | |
| 1820 { | |
| 1821 if(!checkValue(data[1],50,160)) | |
| 1822 return ERROR_; | |
| 1823 if(!checkValue(data[2],0,250)) | |
| 1824 return ERROR_; | |
| 1825 | |
| 1826 Settings.setpoint[i].setpoint_cbar = data[1]; | |
| 1827 Settings.setpoint[i].depth_meter = data[2]; | |
| 1828 return 0x4d; | |
| 1829 } | |
| 1830 | |
| 1831 uint8_t getSetpoint(int i,uint8_t * data) | |
| 1832 { | |
| 1833 data[0] = Settings.setpoint[i].setpoint_cbar; | |
| 1834 data[1] = Settings.setpoint[i].depth_meter; | |
| 1835 return 0x4d; | |
| 1836 } | |
| 1837 | |
| 1838 uint8_t checkValue(uint8_t value,uint8_t from, uint8_t to) | |
| 1839 { | |
| 1840 if(value >= from && value <= to) | |
| 1841 return 1; | |
| 1842 return 0; | |
| 1843 } | |
| 1844 | |
| 1845 uint8_t writeData(uint8_t * data) | |
| 1846 { | |
| 1847 uint32_t newSensitivity; | |
| 1848 uint16_t newDuration, newOffset; | |
| 1849 uint8_t newStopDepth; | |
| 1850 | |
| 1851 switch(data[0]) | |
| 1852 { | |
| 1853 case 0x10: | |
| 1854 return setGas(1,data); | |
| 1855 case 0x11: | |
| 1856 return setGas(2,data); | |
| 1857 case 0x12: | |
| 1858 return setGas(3,data); | |
| 1859 case 0x13: | |
| 1860 return setGas(4,data); | |
| 1861 case 0x14: | |
| 1862 return setGas(5,data); | |
| 1863 case 0x15: | |
| 1864 return setDiluent(1,data); | |
| 1865 case 0x16: | |
| 1866 return setDiluent(2,data); | |
| 1867 case 0x17: | |
| 1868 return setDiluent(3,data); | |
| 1869 case 0x18: | |
| 1870 return setDiluent(4,data); | |
| 1871 case 0x19: | |
| 1872 return setDiluent(5,data); | |
| 1873 case 0x1A: | |
| 1874 return setSetpoint(1,data); | |
| 1875 case 0x1B: | |
| 1876 return setSetpoint(2,data); | |
| 1877 case 0x1C: | |
| 1878 return setSetpoint(3,data); | |
| 1879 case 0x1D: | |
| 1880 return setSetpoint(4,data); | |
| 1881 case 0x1E: | |
| 1882 return setSetpoint(5,data); | |
| 1883 case 0x1F: | |
| 1884 if(!checkValue(data[2],0,1)) | |
| 1885 return ERROR_; | |
| 1886 Settings.CCR_Mode = data[1]; | |
| 1887 break; | |
| 1888 case 0x20: | |
| 1889 if(!checkValue(data[1],0,3)) | |
| 1890 return ERROR_; | |
| 1891 Settings.dive_mode = data[1]; | |
| 1892 break; | |
| 1893 case 0x21: | |
| 1894 if(!checkValue(data[1],1,2)) | |
| 1895 return ERROR_; | |
| 1896 Settings.deco_type.ub.standard = data[1] & 0x0F; | |
| 1897 //Settings.deco_type.ub.alternative = (data[1] & 0xF0) >> 4; | |
| 1898 break; | |
| 1899 case 0x22: | |
| 1900 if(!checkValue(data[1],100,190)) | |
| 1901 return ERROR_; | |
| 1902 Settings.ppO2_max_std = data[1]; | |
| 1903 break; | |
| 1904 case 0x23: | |
| 1905 if(!checkValue(data[1],15,15)) | |
| 1906 return ERROR_; | |
| 1907 Settings.ppO2_min = data[1]; | |
| 1908 break; | |
| 1909 case 0x24: | |
| 1910 if(!checkValue(data[1],0,15)) | |
| 1911 return ERROR_; | |
| 1912 Settings.future_TTS = data[1]; | |
| 1913 break; | |
| 1914 case 0x25: | |
| 1915 if(!checkValue(data[1],10,99)) | |
| 1916 return ERROR_; | |
| 1917 Settings.GF_low = data[1]; | |
| 1918 break; | |
| 1919 case 0x26: | |
| 1920 if(!checkValue(data[1],45,99)) | |
| 1921 return ERROR_; | |
| 1922 Settings.GF_high = data[1]; | |
| 1923 break; | |
| 1924 case 0x27: | |
| 1925 if(!checkValue(data[1],10,99)) | |
| 1926 return ERROR_; | |
| 1927 Settings.aGF_low = data[1]; | |
| 1928 break; | |
| 1929 case 0x28: | |
| 1930 if(!checkValue(data[1],45,99)) | |
| 1931 return ERROR_; | |
| 1932 Settings.aGF_high = data[1]; | |
| 1933 break; | |
| 1934 case 0x29: | |
| 1935 if(!checkValue(data[1],0,5)) | |
| 1936 return ERROR_; | |
| 1937 Settings.VPM_conservatism.ub.standard = data[1]; | |
| 1938 break; | |
| 1939 case 0x2A: | |
| 1940 case 0x2B: | |
| 1941 return ERROR_; | |
| 1942 case 0x2C: | |
| 1943 if(!checkValue(data[1],3,9)) | |
| 1944 return ERROR_; | |
| 1945 Settings.last_stop_depth_meter = data[1]; | |
| 1946 break; | |
| 1947 case 0x2D: | |
| 1948 if(!checkValue(data[1],0,4)) | |
| 1949 return ERROR_; | |
| 1950 Settings.brightness = data[1]; | |
| 1951 break; | |
| 1952 case 0x2E: | |
| 1953 if(!checkValue(data[1],0,1)) | |
| 1954 return ERROR_; | |
| 1955 Settings.nonMetricalSystem = data[1]; | |
| 1956 break; | |
| 1957 case 0x2F: | |
| 1958 return ERROR_; | |
| 1959 case 0x30: | |
| 1960 if(!checkValue(data[1],0,4)) | |
| 1961 return ERROR_; | |
| 1962 Settings.salinity = data[1]; | |
| 1963 break; | |
| 1964 case 0x31: | |
| 1965 if(!checkValue(data[1],0,3)) | |
| 1966 return ERROR_; | |
| 1967 Settings.tX_colorscheme = data[1]; | |
| 1968 GFX_use_colorscheme(Settings.tX_colorscheme); | |
| 1969 break; | |
| 1970 case 0x32: | |
| 1971 if(!checkValue(data[1],0,4)) | |
| 1972 return ERROR_; | |
| 1973 Settings.selected_language = data[1]; | |
| 1974 break; | |
| 1975 case 0x33: | |
| 1976 if(!checkValue(data[1],0,2)) | |
| 1977 return ERROR_; | |
| 1978 Settings.date_format = data[1]; | |
| 1979 break; | |
| 1980 case 0x34: | |
| 1981 return ERROR_; | |
| 1982 case 0x35: | |
| 1983 if(data[1] & 0x80) | |
| 1984 { | |
| 1985 data[1] = ~(data[1]); | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1986 if(!checkValue(data[1],0,PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1987 return ERROR_; |
| 1988 Settings.offsetPressure_mbar = 0 - data[1]; | |
| 1989 } | |
| 1990 else | |
| 1991 { | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1992 if(!checkValue(data[1],0,PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1993 return ERROR_; |
| 1994 Settings.offsetPressure_mbar = data[1]; | |
| 1995 } | |
| 1996 break; | |
| 1997 case 0x36: | |
| 1998 if(!checkValue(data[1],0,1)) | |
| 1999 return ERROR_; | |
| 2000 if(data[1]) | |
| 2001 Settings.safetystopDuration = settingsGetPointerStandard()->safetystopDuration; | |
| 2002 else | |
| 2003 Settings.safetystopDuration = 0; | |
| 2004 break; | |
| 2005 case 0x37: | |
| 2006 return ERROR_; | |
| 2007 case 0x38: | |
| 2008 if(!checkValue(data[1],0,1)) | |
| 2009 return ERROR_; | |
| 2010 Settings.fallbackToFixedSetpoint = data[1]; | |
| 2011 break; | |
| 2012 case 0x39: | |
| 2013 return ERROR_; | |
| 2014 case 0x3A: | |
| 2015 if(!checkValue(data[1],70,110)) | |
| 2016 return ERROR_; | |
| 2017 newSensitivity = data[1]; | |
| 2018 settingsHelperButtonSens_keepPercentageValues(newSensitivity, settingsGetPointer()->ButtonResponsiveness); | |
| 2019 setButtonResponsiveness(Settings.ButtonResponsiveness); | |
| 2020 break; | |
| 2021 case 0x3B: | |
| 2022 // value between 0 and 127 | |
| 2023 if(buttonBalanceTranslatorHexToArray(data[1], settingsGetPointer()->buttonBalance)) | |
| 2024 { | |
| 2025 settingsHelperButtonSens_keepPercentageValues(settingsGetPointer()->ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); | |
| 2026 } | |
| 2027 else // value >= 128 (bit 7 set) factory reset | |
| 2028 { | |
| 2029 getButtonFactorDefaults(&settingsGetPointer()->ButtonResponsiveness[3], settingsGetPointer()->buttonBalance); | |
| 2030 settingsHelperButtonSens_keepPercentageValues(settingsGetPointerStandard()->ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); | |
| 2031 } | |
| 2032 // valid for both: | |
| 2033 setButtonResponsiveness(Settings.ButtonResponsiveness); | |
| 2034 break; | |
| 2035 case 0x3C: | |
| 2036 if(!checkValue(data[1],5,50)) | |
| 2037 return ERROR_; | |
| 2038 Settings.gasConsumption_bottom_l_min = data[1]; | |
| 2039 break; | |
| 2040 case 0x3D: | |
| 2041 if(!checkValue(data[1],5,50)) | |
| 2042 return ERROR_; | |
| 2043 Settings.gasConsumption_deco_l_min = data[1]; | |
| 2044 break; | |
| 2045 case 0x3E: | |
| 2046 if(!checkValue(data[1],5,50)) | |
| 2047 return ERROR_; | |
| 2048 Settings.gasConsumption_travel_l_min = data[1]; | |
| 2049 break; | |
| 2050 case 0x3F: | |
| 2051 case 0x40: | |
| 2052 return ERROR_; | |
| 2053 case 0x41: | |
| 2054 if(!checkValue(data[1],0,1)) | |
| 2055 return ERROR_; | |
| 2056 Settings.alwaysShowPPO2 = data[1]; | |
| 2057 break; | |
| 2058 case 0x42: | |
| 2059 if(data[1] & 0x80) | |
| 2060 { | |
| 2061 data[1] = ~(data[1]); | |
| 2062 if(!checkValue(data[1],0,20)) | |
| 2063 return ERROR_; | |
| 2064 Settings.offsetTemperature_centigrad = 0 - data[1]; | |
| 2065 } | |
| 2066 else | |
| 2067 { | |
| 2068 if(!checkValue(data[1],0,20)) | |
| 2069 return ERROR_; | |
| 2070 Settings.offsetTemperature_centigrad = data[1]; | |
| 2071 } | |
| 2072 break; | |
| 2073 case 0x43: | |
| 2074 if(!checkValue(data[1],60,255)) | |
| 2075 return ERROR_; | |
| 2076 newDuration = (uint16_t)data[1] + 59; | |
| 2077 newDuration /= 60; | |
| 2078 Settings.safetystopDuration = (uint8_t)newDuration; | |
| 2079 break; | |
| 2080 case 0x44: | |
| 2081 if(!checkValue(data[1],21,61)) | |
| 2082 return ERROR_; | |
| 2083 newStopDepth = data[1] + 9; | |
| 2084 if(newStopDepth > 60) | |
| 2085 newStopDepth = 60; | |
| 2086 newStopDepth /= 10; | |
| 2087 Settings.safetystopDepth = newStopDepth; | |
| 2088 break; | |
| 2089 case 0x45: | |
| 2090 case 0x46: | |
| 2091 return ERROR_; | |
| 2092 case 0x47: | |
| 2093 newOffset = data[2] * 256; | |
| 2094 newOffset += data[1]; | |
| 2095 if(newOffset > 9000) | |
| 2096 return ERROR_; | |
| 2097 Settings.logbookOffset = newOffset; | |
| 2098 break; | |
| 2099 case 0x70: | |
| 2100 if(!checkValue(data[1],0,1)) | |
| 2101 return ERROR_; | |
| 2102 Settings.showDebugInfo = data[1]; | |
| 2103 break; | |
| 2104 case 0x71: | |
| 2105 if(!checkValue(data[1],0,(EXTRADISPLAY_END - 1))) | |
| 2106 return ERROR_; | |
| 2107 Settings.extraDisplay = data[1]; | |
| 2108 break; | |
| 2109 case 0x72: | |
| 2110 if(!checkValue(data[1],0,8)) | |
| 2111 return ERROR_; | |
| 2112 Settings.tX_customViewPrimary = data[1]; | |
| 2113 break; | |
| 2114 case 0x73: | |
| 2115 if(!checkValue(data[1],0,20)) | |
| 2116 return ERROR_; | |
| 2117 Settings.tX_customViewTimeout = data[1]; | |
| 2118 break; | |
| 2119 case 0x74: | |
| 2120 if(!checkValue(data[1],1,7)) | |
| 2121 return ERROR_; | |
| 2122 Settings.tX_userselectedLeftLowerCornerPrimary = data[1]; | |
| 2123 break; | |
| 2124 case 0x75: | |
| 2125 if(!checkValue(data[1],0,20)) | |
| 2126 return ERROR_; | |
| 2127 Settings.tX_userselectedLeftLowerCornerTimeout = data[1]; | |
| 2128 break; | |
| 2129 } | |
| 2130 return 0; | |
| 2131 } | |
| 2132 | |
| 2133 | |
| 2134 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data) | |
| 2135 { | |
| 2136 enum JeanDoParameterType { | |
| 2137 PARAM_UNKNOWN = 0, | |
| 2138 PARAM_INT15 = 1, | |
| 2139 PARAM_INT8, | |
| 2140 PARAM_DECI, | |
| 2141 PARAM_CENTI, | |
| 2142 PARAM_MILI, | |
| 2143 PARAM_PERCENT, | |
| 2144 PARAM_SEC, | |
| 2145 PARAM_COLOR, | |
| 2146 PARAM_BOOL, | |
| 2147 PARAM_ENUM, | |
| 2148 PARAM_SIGNED = 128, | |
| 2149 PARAM_SDECI = PARAM_SIGNED|PARAM_DECI, | |
| 2150 PARAM_SSEC = PARAM_SIGNED|PARAM_SEC, | |
| 2151 PARAM_SINT = PARAM_SIGNED|PARAM_INT8 | |
| 2152 }; | |
| 2153 | |
| 2154 // uint32_t buttonSensitivity; | |
| 2155 uint16_t newDuration; | |
| 2156 | |
| 2157 uint8_t datacounter = 0; | |
| 2158 | |
| 2159 data[0] = 0; | |
| 2160 data[1] = 0; | |
| 2161 data[2] = 0; | |
| 2162 data[3] = 0; | |
| 2163 datacounter = 0; | |
| 2164 | |
| 2165 switch(what) | |
| 2166 { | |
| 2167 case 0x10: | |
| 2168 case 0x11: | |
| 2169 case 0x12: | |
| 2170 case 0x13: | |
| 2171 case 0x14: | |
| 2172 data[datacounter++] = PARAM_INT8; | |
| 2173 data[datacounter++] = 4; | |
| 2174 data[datacounter++] = settingsGetPointerStandard()->gas[1].oxygen_percentage; | |
| 2175 data[datacounter++] = 100; | |
| 2176 break; | |
| 2177 | |
| 2178 case 0x15: | |
| 2179 case 0x16: | |
| 2180 case 0x17: | |
| 2181 case 0x18: | |
| 2182 case 0x19: | |
| 2183 data[datacounter++] = PARAM_INT8; | |
| 2184 data[datacounter++] = 4; | |
| 2185 data[datacounter++] = settingsGetPointerStandard()->gas[1].oxygen_percentage; | |
| 2186 data[datacounter++] = 100; | |
| 2187 break; | |
| 2188 | |
| 2189 case 0x1A: | |
| 2190 case 0x1B: | |
| 2191 case 0x1C: | |
| 2192 case 0x1D: | |
| 2193 case 0x1E: | |
| 2194 data[datacounter++] = PARAM_CENTI; | |
| 2195 data[datacounter++] = 50; | |
| 2196 data[datacounter++] = settingsGetPointerStandard()->setpoint[1].setpoint_cbar; | |
| 2197 data[datacounter++] = 160; | |
| 2198 break; | |
| 2199 | |
| 2200 case 0x1F: | |
| 2201 data[datacounter++] = PARAM_ENUM; | |
| 2202 data[datacounter++] = 0; | |
| 2203 data[datacounter++] = settingsGetPointerStandard()->CCR_Mode; | |
| 2204 data[datacounter++] = 1; | |
| 2205 break; | |
| 2206 | |
| 2207 case 0x20: | |
| 2208 data[datacounter++] = PARAM_ENUM; | |
| 2209 data[datacounter++] = 0; | |
| 2210 data[datacounter++] = settingsGetPointerStandard()->dive_mode; | |
| 2211 data[datacounter++] = 3; | |
| 2212 break; | |
| 2213 | |
| 2214 case 0x21: | |
| 2215 data[datacounter++] = PARAM_ENUM; | |
| 2216 data[datacounter++] = 1; | |
| 2217 data[datacounter++] = settingsGetPointerStandard()->deco_type.ub.standard; | |
| 2218 data[datacounter++] = 2; | |
| 2219 break; | |
| 2220 | |
| 2221 case 0x22: | |
| 2222 data[datacounter++] = PARAM_CENTI; | |
| 2223 data[datacounter++] = 100; | |
| 2224 data[datacounter++] = settingsGetPointerStandard()->ppO2_max_std; | |
| 2225 data[datacounter++] = 190; | |
| 2226 break; | |
| 2227 | |
| 2228 case 0x23: | |
| 2229 data[datacounter++] = PARAM_CENTI; | |
| 2230 data[datacounter++] = 15; | |
| 2231 data[datacounter++] = settingsGetPointerStandard()->ppO2_min; | |
| 2232 data[datacounter++] = 15; | |
| 2233 break; | |
| 2234 | |
| 2235 case 0x24: | |
| 2236 data[datacounter++] = PARAM_INT8; // minutes | |
| 2237 data[datacounter++] = 0; | |
| 2238 data[datacounter++] = settingsGetPointerStandard()->future_TTS; | |
| 2239 data[datacounter++] = 15; | |
| 2240 break; | |
| 2241 | |
| 2242 case 0x25: | |
| 2243 data[datacounter++] = PARAM_PERCENT; | |
| 2244 data[datacounter++] = 10; | |
| 2245 data[datacounter++] = settingsGetPointerStandard()->GF_low; | |
| 2246 data[datacounter++] = 99; | |
| 2247 break; | |
| 2248 | |
| 2249 case 0x26: | |
| 2250 data[datacounter++] = PARAM_PERCENT; | |
| 2251 data[datacounter++] = 45; | |
| 2252 data[datacounter++] = settingsGetPointerStandard()->GF_high; | |
| 2253 data[datacounter++] = 99; | |
| 2254 break; | |
| 2255 | |
| 2256 case 0x27: | |
| 2257 data[datacounter++] = PARAM_PERCENT; | |
| 2258 data[datacounter++] = 10; | |
| 2259 data[datacounter++] = settingsGetPointerStandard()->aGF_low; | |
| 2260 data[datacounter++] = 99; | |
| 2261 break; | |
| 2262 | |
| 2263 case 0x28: | |
| 2264 data[datacounter++] = PARAM_PERCENT; | |
| 2265 data[datacounter++] = 45; | |
| 2266 data[datacounter++] = settingsGetPointerStandard()->aGF_high; | |
| 2267 data[datacounter++] = 99; | |
| 2268 break; | |
| 2269 | |
| 2270 case 0x29: | |
| 2271 data[datacounter++] = PARAM_INT8; // conservatism +0 .. +5 | |
| 2272 data[datacounter++] = 0; | |
| 2273 data[datacounter++] = settingsGetPointerStandard()->VPM_conservatism.ub.standard; | |
| 2274 data[datacounter++] = 5; | |
| 2275 break; | |
| 2276 | |
| 2277 case 0x2A: | |
| 2278 case 0x2B: | |
| 2279 data[datacounter++] = PARAM_PERCENT; | |
| 2280 data[datacounter++] = 100; | |
| 2281 data[datacounter++] = 100;// saturation, desaturation, settingsGetPointerStandard()->; | |
| 2282 data[datacounter++] = 100; | |
| 2283 break; | |
| 2284 | |
| 2285 case 0x2C: | |
| 2286 data[datacounter++] = PARAM_INT8; | |
| 2287 data[datacounter++] = 3; | |
| 2288 data[datacounter++] = settingsGetPointerStandard()->last_stop_depth_meter; | |
| 2289 data[datacounter++] = 9; | |
| 2290 break; | |
| 2291 | |
| 2292 case 0x2D: | |
| 2293 data[datacounter++] = PARAM_ENUM; | |
| 2294 data[datacounter++] = 0; | |
| 2295 data[datacounter++] = settingsGetPointerStandard()->brightness; | |
| 2296 data[datacounter++] = 4; | |
| 2297 break; | |
| 2298 | |
| 2299 case 0x2E: | |
| 2300 data[datacounter++] = PARAM_ENUM; | |
| 2301 data[datacounter++] = 0; | |
| 2302 data[datacounter++] = settingsGetPointerStandard()->nonMetricalSystem; | |
| 2303 data[datacounter++] = 1; | |
| 2304 break; | |
| 2305 | |
| 2306 case 0x2F: | |
| 2307 data[datacounter++] = PARAM_INT8; // Sampling rate logbook | |
| 2308 data[datacounter++] = 2; | |
| 2309 data[datacounter++] = 2; | |
| 2310 data[datacounter++] = 2; | |
| 2311 break; | |
| 2312 | |
| 2313 case 0x30: | |
| 2314 data[datacounter++] = PARAM_PERCENT; | |
| 2315 data[datacounter++] = 0; | |
| 2316 data[datacounter++] = settingsGetPointerStandard()->salinity; | |
| 2317 data[datacounter++] = 4; | |
| 2318 break; | |
| 2319 | |
| 2320 case 0x31: | |
| 2321 data[datacounter++] = PARAM_INT8; | |
| 2322 data[datacounter++] = 0; | |
| 2323 data[datacounter++] = settingsGetPointerStandard()->tX_colorscheme; | |
| 2324 data[datacounter++] = 3; | |
| 2325 break; | |
| 2326 | |
| 2327 case 0x32: | |
| 2328 data[datacounter++] = PARAM_ENUM; | |
| 2329 data[datacounter++] = 0; | |
| 2330 data[datacounter++] = settingsGetPointerStandard()->selected_language; | |
| 2331 data[datacounter++] = 1; | |
| 2332 break; | |
| 2333 | |
| 2334 case 0x33: | |
| 2335 data[datacounter++] = PARAM_ENUM; | |
| 2336 data[datacounter++] = 0; | |
| 2337 data[datacounter++] = settingsGetPointerStandard()->date_format; | |
| 2338 data[datacounter++] = 2; | |
| 2339 break; | |
| 2340 | |
| 2341 case 0x34: | |
| 2342 data[datacounter++] = PARAM_UNKNOWN ; | |
| 2343 data[datacounter++] = 0; | |
| 2344 data[datacounter++] = 0; // compass gain, is unknown,, settingsGetPointerStandard()->; | |
| 2345 data[datacounter++] = 0; | |
| 2346 break; | |
| 2347 | |
| 2348 case 0x35: | |
| 2349 data[datacounter++] = PARAM_SINT; | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
2350 data[datacounter++] = (uint8_t)(256 - PRESSURE_OFFSET_LIMIT_MBAR); // == -20 |
| 38 | 2351 if(settingsGetPointerStandard()->offsetPressure_mbar < 0) |
| 2352 data[datacounter++] = (uint8_t)(127 - settingsGetPointerStandard()->offsetPressure_mbar); | |
| 2353 else | |
| 2354 data[datacounter++] = settingsGetPointerStandard()->offsetPressure_mbar; | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
2355 data[datacounter++] = PRESSURE_OFFSET_LIMIT_MBAR; |
| 38 | 2356 break; |
| 2357 | |
| 2358 case 0x36: | |
| 2359 data[datacounter++] = PARAM_BOOL; | |
| 2360 data[datacounter++] = 0; | |
| 2361 if(settingsGetPointerStandard()->safetystopDuration) | |
| 2362 data[datacounter++] = 1; | |
| 2363 else | |
| 2364 data[datacounter++] = 0; | |
| 2365 data[datacounter++] = 1; | |
| 2366 break; | |
| 2367 | |
| 2368 case 0x37: | |
| 2369 data[datacounter++] = PARAM_UNKNOWN ; | |
| 2370 data[datacounter++] = 0; | |
| 2371 data[datacounter++] = 0; // Set calibration gas, not possible with optical | |
| 2372 data[datacounter++] = 0; | |
| 2373 break; | |
| 2374 | |
| 2375 case 0x38: | |
| 2376 data[datacounter++] = PARAM_BOOL; | |
| 2377 data[datacounter++] = 0; | |
| 2378 data[datacounter++] = settingsGetPointerStandard()->fallbackToFixedSetpoint; | |
| 2379 data[datacounter++] = 1; | |
| 2380 break; | |
| 2381 | |
| 2382 case 0x39: | |
| 2383 data[datacounter++] = PARAM_BOOL; | |
| 2384 data[datacounter++] = 0; | |
| 2385 data[datacounter++] = 0; // flipscreen, not yet :-) settingsGetPointerStandard()->; | |
| 2386 data[datacounter++] = 0; | |
| 2387 break; | |
| 2388 | |
| 2389 case 0x3A: | |
| 2390 data[datacounter++] = PARAM_PERCENT; | |
| 2391 data[datacounter++] = 70; | |
| 2392 data[datacounter++] = settingsGetPointerStandard()->ButtonResponsiveness[3]; | |
| 2393 data[datacounter++] = 110; | |
| 2394 break; | |
| 2395 | |
| 2396 case 0x3B: | |
| 2397 data[datacounter++] = PARAM_UNKNOWN; | |
| 2398 data[datacounter++] = 0; | |
| 2399 data[datacounter++] = buttonBalanceTranslateArrayOutHex(settingsGetPointerStandard()->buttonBalance); | |
| 2400 data[datacounter++] = 128; | |
| 2401 break; | |
| 2402 | |
| 2403 case 0x3C: | |
| 2404 data[datacounter++] = PARAM_INT8; | |
| 2405 data[datacounter++] = 5; | |
| 2406 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_bottom_l_min; | |
| 2407 data[datacounter++] = 50; | |
| 2408 break; | |
| 2409 | |
| 2410 case 0x3D: | |
| 2411 data[datacounter++] = PARAM_INT8; | |
| 2412 data[datacounter++] = 5; | |
| 2413 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_deco_l_min; | |
| 2414 data[datacounter++] = 50; | |
| 2415 break; | |
| 2416 | |
| 2417 case 0x3E: | |
| 2418 data[datacounter++] = PARAM_INT8; | |
| 2419 data[datacounter++] = 5; | |
| 2420 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_travel_l_min; | |
| 2421 data[datacounter++] = 50; | |
| 2422 break; | |
| 2423 | |
| 2424 case 0x3F: | |
| 2425 data[datacounter++] = PARAM_UNKNOWN; | |
| 2426 data[datacounter++] = 0; | |
| 2427 data[datacounter++] = 0; // Dynamic ascend rate, not yet :-) settingsGetPointerStandard()->; | |
| 2428 data[datacounter++] = 0; | |
| 2429 break; | |
| 2430 | |
| 2431 case 0x40: | |
| 2432 data[datacounter++] = PARAM_BOOL; | |
| 2433 data[datacounter++] = 1; | |
| 2434 data[datacounter++] = 1; // Graphical speed indicator; | |
| 2435 data[datacounter++] = 1; | |
| 2436 break; | |
| 2437 | |
| 2438 case 0x41: | |
| 2439 data[datacounter++] = PARAM_BOOL; | |
| 2440 data[datacounter++] = 0; | |
| 2441 data[datacounter++] = settingsGetPointerStandard()->alwaysShowPPO2; | |
| 2442 data[datacounter++] = 1; | |
| 2443 break; | |
| 2444 | |
| 2445 case 0x42: | |
| 2446 data[datacounter++] = PARAM_SIGNED|PARAM_CENTI; | |
| 2447 data[datacounter++] = (uint8_t)(256 - 20); // == -20 | |
| 2448 if(settingsGetPointerStandard()->offsetTemperature_centigrad < 0) | |
| 2449 data[datacounter++] = (uint8_t)(127 - settingsGetPointerStandard()->offsetTemperature_centigrad); | |
| 2450 else | |
| 2451 data[datacounter++] = settingsGetPointerStandard()->offsetTemperature_centigrad; | |
| 2452 data[datacounter++] = 20; | |
| 2453 break; | |
| 2454 | |
| 2455 case 0x43: | |
| 2456 newDuration = settingsGetPointerStandard()->safetystopDuration; | |
| 2457 newDuration *= 60; | |
| 2458 if(newDuration > 255) | |
| 2459 newDuration = 255; | |
| 2460 data[datacounter++] = PARAM_INT8; | |
| 2461 data[datacounter++] = 60; // coud be 1 minute instead | |
| 2462 data[datacounter++] = (uint8_t)newDuration; | |
| 2463 data[datacounter++] = 255; // could be 5 minutes instead | |
| 2464 break; | |
| 2465 | |
| 2466 case 0x44: | |
| 2467 data[datacounter++] = PARAM_INT8; | |
| 2468 data[datacounter++] = 30; // coud be 3 meter instead | |
| 2469 data[datacounter++] = settingsGetPointerStandard()->safetystopDepth * 10; | |
| 2470 data[datacounter++] = 60; // could be 6 meter instead | |
| 2471 break; | |
| 2472 | |
| 2473 case 0x45: | |
| 2474 case 0x46: | |
| 2475 data[datacounter++] = PARAM_UNKNOWN; | |
| 2476 data[datacounter++] = 0; | |
| 2477 data[datacounter++] = 0; // SafetyStop End Depth and SafetyStop Reset Depth | |
| 2478 data[datacounter++] = 0; | |
| 2479 break; | |
| 2480 | |
| 2481 case 0x47: | |
| 2482 data[datacounter++] = PARAM_INT15; | |
| 2483 data[datacounter++] = 0; | |
| 2484 data[datacounter++] = 0; | |
| 2485 data[datacounter++] = settingsGetPointerStandard()->logbookOffset & 0xFF; | |
| 2486 data[datacounter++] = settingsGetPointerStandard()->logbookOffset / 0xFF; | |
| 2487 data[datacounter++] = 9000 & 0xFF; | |
| 2488 data[datacounter++] = 9000 / 0xFF; | |
| 2489 break; | |
| 2490 | |
| 2491 case 0x70: | |
| 2492 data[datacounter++] = PARAM_BOOL; | |
| 2493 data[datacounter++] = 0; | |
| 2494 data[datacounter++] = settingsGetPointerStandard()->showDebugInfo; | |
| 2495 data[datacounter++] = 1; | |
| 2496 break; | |
| 2497 | |
| 2498 case 0x71: | |
| 2499 data[datacounter++] = PARAM_ENUM; | |
| 2500 data[datacounter++] = 0; | |
| 2501 data[datacounter++] = settingsGetPointerStandard()->extraDisplay; | |
| 2502 data[datacounter++] = (EXTRADISPLAY_END - 1); | |
| 2503 break; | |
| 2504 | |
| 2505 case 0x72: | |
| 2506 data[datacounter++] = PARAM_ENUM; | |
| 2507 data[datacounter++] = 0; | |
| 2508 data[datacounter++] = settingsGetPointerStandard()->tX_customViewPrimary; | |
| 2509 data[datacounter++] = 8; | |
| 2510 break; | |
| 2511 | |
| 2512 case 0x73: | |
| 2513 data[datacounter++] = PARAM_INT8; | |
| 2514 data[datacounter++] = 0; | |
| 2515 data[datacounter++] = settingsGetPointerStandard()->tX_customViewTimeout; | |
| 2516 data[datacounter++] = 60; | |
| 2517 break; | |
| 2518 | |
| 2519 case 0x74: | |
| 2520 data[datacounter++] = PARAM_ENUM; | |
| 2521 data[datacounter++] = 1; | |
| 2522 data[datacounter++] = settingsGetPointerStandard()->tX_userselectedLeftLowerCornerPrimary; | |
| 2523 data[datacounter++] = 7; | |
| 2524 break; | |
| 2525 | |
| 2526 case 0x75: | |
| 2527 data[datacounter++] = PARAM_INT8; | |
| 2528 data[datacounter++] = 0; | |
| 2529 data[datacounter++] = settingsGetPointerStandard()->tX_userselectedLeftLowerCornerTimeout; | |
| 2530 data[datacounter++] = 60; | |
| 2531 break; | |
| 2532 } | |
| 2533 | |
| 2534 if(datacounter == 0) | |
| 2535 { | |
| 2536 data[datacounter++] = PARAM_UNKNOWN; | |
| 2537 data[datacounter++] = 0; | |
| 2538 data[datacounter++] = 0; // SafetyStop End Depth and SafetyStop Reset Depth | |
| 2539 data[datacounter++] = 0; | |
| 2540 } | |
| 2541 | |
| 2542 return datacounter; | |
| 2543 } | |
| 2544 | |
| 2545 | |
| 2546 uint8_t readData(uint8_t what, uint8_t * data) | |
| 2547 { | |
| 2548 data[0] = 0; | |
| 2549 data[1] = 0; | |
| 2550 data[2] = 0; | |
| 2551 data[3] = 0; | |
| 2552 switch(what) | |
| 2553 { | |
| 2554 case 0x10: | |
| 2555 return getGas(1,data); | |
| 2556 case 0x11: | |
| 2557 return getGas(2,data); | |
| 2558 case 0x12: | |
| 2559 return getGas(3,data); | |
| 2560 case 0x13: | |
| 2561 return getGas(4,data); | |
| 2562 case 0x14: | |
| 2563 return getGas(5,data); | |
| 2564 case 0x15: | |
| 2565 return getDiluent(1,data); | |
| 2566 case 0x16: | |
| 2567 return getDiluent(2,data); | |
| 2568 case 0x17: | |
| 2569 return getDiluent(3,data); | |
| 2570 case 0x18: | |
| 2571 return getDiluent(4,data); | |
| 2572 case 0x19: | |
| 2573 return getDiluent(5,data); | |
| 2574 case 0x1A: | |
| 2575 return getSetpoint(1,data); | |
| 2576 case 0x1B: | |
| 2577 return getSetpoint(2,data); | |
| 2578 case 0x1C: | |
| 2579 return getSetpoint(3,data); | |
| 2580 case 0x1D: | |
| 2581 return getSetpoint(4,data); | |
| 2582 case 0x1E: | |
| 2583 return getSetpoint(5,data); | |
| 2584 case 0x1F: | |
| 2585 data[0] = Settings.CCR_Mode; | |
| 2586 break; | |
| 2587 case 0x20: | |
| 2588 data[0] = Settings.dive_mode; | |
| 2589 break; | |
| 2590 case 0x21: | |
| 2591 data[0] = Settings.deco_type.ub.standard; | |
| 2592 break; | |
| 2593 case 0x22: | |
| 2594 data[0] = Settings.ppO2_max_std; | |
| 2595 break; | |
| 2596 case 0x23: | |
| 2597 data[0] = Settings.ppO2_min; | |
| 2598 break; | |
| 2599 case 0x24: | |
| 2600 data[0] = Settings.future_TTS; | |
| 2601 break; | |
| 2602 case 0x25: | |
| 2603 data[0] = Settings.GF_low; | |
| 2604 break; | |
| 2605 case 0x26: | |
| 2606 data[0] = Settings.GF_high; | |
| 2607 break; | |
| 2608 case 0x27: | |
| 2609 data[0] = Settings.aGF_low; | |
| 2610 break; | |
| 2611 case 0x28: | |
| 2612 data[0] = Settings.aGF_high; | |
| 2613 break; | |
| 2614 case 0x29: | |
| 2615 data[0] = Settings.VPM_conservatism.ub.standard; | |
| 2616 break; | |
| 2617 case 0x2A: | |
| 2618 case 0x2B: | |
| 2619 data[0] = 100; | |
| 2620 break; | |
| 2621 case 0x2C: | |
| 2622 data[0] = Settings.last_stop_depth_meter; | |
| 2623 break; | |
| 2624 case 0x2D: | |
| 2625 data[0] = Settings.brightness; | |
| 2626 break; | |
| 2627 case 0x2E: | |
| 2628 data[0] = Settings.nonMetricalSystem; | |
| 2629 break; | |
| 2630 case 0x2F: | |
| 2631 data[0] = 0; // 0 == 2 sec sampling rate | |
| 2632 break; | |
| 2633 case 0x30: | |
| 2634 data[0] = Settings.salinity; | |
| 2635 break; | |
| 2636 case 0x31: | |
| 2637 data[0] = Settings.tX_colorscheme; | |
| 2638 break; | |
| 2639 case 0x32: | |
| 2640 data[0] = Settings.selected_language; | |
| 2641 break; | |
| 2642 case 0x33: | |
| 2643 data[0] = Settings.date_format; | |
| 2644 break; | |
| 2645 case 0x34: | |
| 2646 data[0] = 7; // gain should be always 7 as far as I understand the code in RTE | |
| 2647 break; | |
| 2648 case 0x35: | |
| 2649 data[0] = Settings.offsetPressure_mbar; | |
| 2650 break; | |
| 2651 case 0x36: | |
| 2652 if(Settings.safetystopDepth) | |
| 2653 data[0] = 1; | |
| 2654 else | |
| 2655 data[0] = 0; | |
| 2656 break; | |
| 2657 case 0x37: | |
| 2658 data[0] = 0; // calibration gas %O2 -> 0 no gas :-) | |
| 2659 break; | |
| 2660 case 0x38: | |
| 2661 data[0] = Settings.fallbackToFixedSetpoint; | |
| 2662 break; | |
| 2663 case 0x39: | |
| 2664 data[0] = 0; // flip screen | |
| 2665 break; | |
| 2666 case 0x3A: | |
| 2667 data[0] = Settings.ButtonResponsiveness[3]; | |
| 2668 break; | |
| 2669 case 0x3B: | |
| 2670 data[0] = buttonBalanceTranslateArrayOutHex(settingsGetPointer()->buttonBalance); | |
| 2671 break; | |
| 2672 case 0x3C: | |
| 2673 data[0] = Settings.gasConsumption_bottom_l_min; | |
| 2674 break; | |
| 2675 case 0x3D: | |
| 2676 data[0] = Settings.gasConsumption_deco_l_min; | |
| 2677 break; | |
| 2678 case 0x3E: | |
| 2679 data[0] = Settings.gasConsumption_travel_l_min; | |
| 2680 break; | |
| 2681 case 0x3F: | |
| 2682 data[0] = 0; // fixed ascend rate 10 m/min | |
| 2683 break; | |
| 2684 case 0x40: | |
| 2685 data[0] = 1; // graphical speed indicator | |
| 2686 break; | |
| 2687 case 0x41: | |
| 2688 data[0] = Settings.alwaysShowPPO2; | |
| 2689 break; | |
| 2690 case 0x42: | |
| 2691 data[0] = Settings.offsetTemperature_centigrad; | |
| 2692 break; | |
| 2693 case 0x43: | |
| 2694 if(Settings.safetystopDuration > 4) | |
| 2695 data[0] = 255; // seconds | |
| 2696 else | |
| 2697 data[0] = 60 * Settings.safetystopDuration; | |
| 2698 break; | |
| 2699 case 0x44: | |
| 2700 data[0] = Settings.safetystopDepth * 10; // cbar instead of meter | |
| 2701 break; | |
| 2702 case 0x45: | |
| 2703 if(Settings.safetystopDepth == 3) | |
| 2704 data[0] = 20; // cbar | |
| 2705 else | |
| 2706 data[0] = 30; // cbar | |
| 2707 break; | |
| 2708 case 0x46: | |
| 2709 data[0] = 10; // reset at 10 meter as far as I understood | |
| 2710 break; | |
| 2711 case 0x47: | |
| 2712 data[0] = Settings.logbookOffset & 0xFF; | |
| 2713 data[1] = Settings.logbookOffset / 0xFF; | |
| 2714 break; | |
| 2715 case 0x70: | |
| 2716 data[0] = Settings.showDebugInfo; | |
| 2717 break; | |
| 2718 case 0x71: | |
| 2719 data[0] = Settings.extraDisplay; | |
| 2720 break; | |
| 2721 case 0x72: | |
| 2722 data[0] = Settings.tX_customViewPrimary; | |
| 2723 break; | |
| 2724 case 0x73: | |
| 2725 data[0] = Settings.tX_customViewTimeout; | |
| 2726 break; | |
| 2727 case 0x74: | |
| 2728 data[0] = Settings.tX_userselectedLeftLowerCornerPrimary; | |
| 2729 break; | |
| 2730 case 0x75: | |
| 2731 data[0] = Settings.tX_userselectedLeftLowerCornerTimeout; | |
| 2732 break; | |
| 2733 } | |
| 2734 return 0x4D; | |
| 2735 } | |
| 2736 | |
| 2737 | |
| 2738 uint8_t RTEminimum_required_high(void) | |
| 2739 { | |
| 2740 return RTErequiredHigh; | |
| 2741 } | |
| 2742 uint8_t RTEminimum_required_low(void) | |
| 2743 { | |
| 2744 return RTErequiredLow; | |
| 2745 } | |
| 2746 | |
| 2747 uint8_t FONTminimum_required_high(void) | |
| 2748 { | |
| 2749 return FONTrequiredHigh; | |
| 2750 } | |
| 2751 uint8_t FONTminimum_required_low(void) | |
| 2752 { | |
| 2753 return FONTrequiredLow; | |
| 2754 } | |
| 2755 | |
| 2756 | |
| 2757 void setActualRTEversion(uint8_t high, uint8_t low) | |
| 2758 { | |
| 2759 RTEactualHigh = high; | |
| 2760 RTEactualLow = low; | |
| 2761 } | |
| 2762 | |
| 2763 | |
| 2764 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow) | |
| 2765 { | |
| 2766 if(RTEhigh && RTElow) | |
| 2767 { | |
| 2768 *RTEhigh = RTEactualHigh; | |
| 2769 *RTElow = RTEactualLow; | |
| 2770 } | |
| 2771 if(FONThigh && FONTlow) | |
| 2772 { | |
| 2773 *FONThigh = *(uint8_t *)0x08132000; | |
| 2774 *FONTlow = *(uint8_t *)0x08132001; | |
| 2775 } | |
| 2776 } | |
| 2777 | |
| 2778 | |
| 2779 uint8_t getLicence(void) | |
| 2780 { | |
| 2781 return hardwareDataGetPointer()->primaryLicence; | |
| 2782 } | |
| 2783 | |
| 2784 | |
| 2785 void firmwareGetDate(RTC_DateTypeDef *SdateOutput) | |
| 2786 { | |
| 2787 SdateOutput->Year = firmwareDataGetPointer()->release_year; | |
| 2788 SdateOutput->Month = firmwareDataGetPointer()->release_month; | |
| 2789 SdateOutput->Date = firmwareDataGetPointer()->release_day; | |
| 2790 } | |
| 2791 | |
| 2792 | |
| 2793 // this should use device specific values stored in OTPROG ROM soon | |
| 2794 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray) | |
| 2795 { | |
| 2796 *basePercentage = settingsGetPointerStandard()->ButtonResponsiveness[3]; | |
| 2797 | |
| 2798 for(int i=0;i<3;i++) | |
| 2799 { | |
| 2800 buttonBalanceArray[i] = settingsGetPointerStandard()->buttonBalance[i]; | |
| 2801 } | |
| 2802 } | |
| 2803 | |
| 2804 | |
| 2805 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray) | |
| 2806 { | |
| 2807 if(hexValue > 127) | |
| 2808 return 0; | |
| 2809 // internal order: 0 = right, 1 = center, 2 = left | |
| 2810 // external order: Factory,left,center,right | |
| 2811 outputArray[0] = 2 + (hexValue & 0x03); | |
| 2812 hexValue /= 4; | |
| 2813 outputArray[1] = 2 + (hexValue & 0x03); | |
| 2814 hexValue /= 4; | |
| 2815 outputArray[2] = 2 + (hexValue & 0x03); | |
| 2816 | |
| 2817 return 1; | |
| 2818 } | |
| 2819 | |
| 2820 | |
| 2821 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray) | |
| 2822 { | |
| 2823 uint8_t hexValue = 0; | |
| 2824 | |
| 2825 if(inputArray[2] > 2) | |
| 2826 { | |
| 2827 hexValue += inputArray[2] - 2; | |
| 2828 } | |
| 2829 hexValue *= 4; | |
| 2830 | |
| 2831 if(inputArray[1] > 2) | |
| 2832 { | |
| 2833 hexValue += inputArray[1] - 2; | |
| 2834 } | |
| 2835 hexValue *= 4; | |
| 2836 if(inputArray[0] > 2) | |
| 2837 { | |
| 2838 hexValue += inputArray[0] - 2; | |
| 2839 } | |
| 2840 return hexValue; | |
| 2841 } | |
| 2842 | |
| 2843 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray) | |
| 2844 { | |
| 2845 if((inputValueRaw >= 70) && (inputValueRaw <= 110)) | |
| 2846 { | |
| 2847 Settings.FactoryButtonBase = inputValueRaw; | |
| 2848 } | |
| 2849 for(int i=0;i<3;i++) | |
| 2850 { | |
| 2851 if((inputBalanceArray[i] >= 2) && (inputBalanceArray[i] <= 5)) | |
| 2852 { | |
| 2853 Settings.FactoryButtonBalance[i] = inputBalanceArray[i]; | |
| 2854 } | |
| 2855 } | |
| 2856 } | |
| 2857 | |
| 2858 | |
| 2859 /** | |
| 2860 ****************************************************************************** | |
| 2861 * @brief settingsHelperButtonSens. / make 32 bit input to three buttons + storage value in [3] | |
| 2862 * @author heinrichs weikamp gmbh | |
| 2863 * @version V 01 | |
| 2864 * @date 19-Sept-2016 | |
| 2865 ****************************************************************************** | |
| 2866 * | |
| 2867 * @param inputValueRaw: | |
| 2868 * @param outArray4Values: [0] is right, [1] is center, [2] is left, [3] is original value with zero balance | |
| 2869 * @retval None | |
| 2870 */ | |
| 2871 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values) | |
| 2872 { | |
| 2873 uint32_t newSensitivity; | |
| 2874 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2875 if(inputValueRaw > MAX_BUTTONRESPONSIVENESS) |
| 38 | 2876 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2877 inputValueRaw = MAX_BUTTONRESPONSIVENESS; |
| 38 | 2878 } |
| 2879 else | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2880 if(inputValueRaw < MIN_BUTTONRESPONSIVENESS) |
| 38 | 2881 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2882 inputValueRaw = MIN_BUTTONRESPONSIVENESS; |
| 38 | 2883 } |
| 2884 | |
| 2885 // the unbalanced value | |
| 2886 outArray4Values[3] = inputValueRaw; | |
| 2887 | |
| 2888 // the balanced values | |
| 2889 for(int i=0;i<3;i++) | |
| 2890 { | |
| 2891 newSensitivity = inputValueRaw; | |
| 2892 switch(settingsGetPointer()->buttonBalance[i]) | |
| 2893 { | |
| 2894 case 1: // should not be an option hw 170508 | |
| 2895 newSensitivity -= 20; | |
| 2896 break; | |
| 2897 case 2: | |
| 2898 newSensitivity -= 10; | |
| 2899 break; | |
| 2900 default: | |
| 2901 break; | |
| 2902 case 4: | |
| 2903 newSensitivity += 10; | |
| 2904 break; | |
| 2905 case 5: | |
| 2906 newSensitivity += 20; | |
| 2907 break; | |
| 2908 } | |
| 2909 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2910 if(newSensitivity > MAX_BUTTONRESPONSIVENESS) |
| 38 | 2911 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2912 newSensitivity = MAX_BUTTONRESPONSIVENESS; |
| 38 | 2913 } |
| 2914 outArray4Values[i] = newSensitivity; | |
| 2915 } | |
| 2916 } | |
| 2917 | |
| 2918 | |
| 2919 /** | |
| 2920 ****************************************************************************** | |
| 2921 * @brief settingsHelperButtonSens_translate_to_hwOS_values. / make 32 bit input to three buttons + storage value in [3] | |
| 2922 * @author heinrichs weikamp gmbh | |
| 2923 * @version V 01 | |
| 2924 * @date 19-Sept-2016 | |
| 2925 ****************************************************************************** | |
| 2926 * | |
| 2927 * @param inputValueRaw: | |
| 2928 * @param outArray4Values: [0] is right, [1] is center, [2] is left, [3] is original value with zero balance | |
| 2929 * @retval None | |
| 2930 */ | |
| 2931 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values) | |
| 2932 { | |
| 2933 uint32_t newSensitivity; | |
| 2934 | |
| 2935 for(int i=0;i<3;i++) | |
| 2936 { | |
| 2937 newSensitivity = inputValueRaw; | |
| 2938 switch(settingsGetPointer()->buttonBalance[i]) | |
| 2939 { | |
| 2940 case 1: | |
| 2941 newSensitivity -= 20; | |
| 2942 break; | |
| 2943 case 2: | |
| 2944 newSensitivity -= 10; | |
| 2945 break; | |
| 2946 default: | |
| 2947 break; | |
| 2948 case 4: | |
| 2949 newSensitivity += 10; | |
| 2950 break; | |
| 2951 case 5: | |
| 2952 newSensitivity += 20; | |
| 2953 break; | |
| 2954 } | |
| 2955 | |
| 2956 if(newSensitivity > 100) | |
| 2957 { | |
| 2958 if(newSensitivity <= 105) | |
| 2959 newSensitivity = 10; | |
| 2960 else | |
| 2961 newSensitivity = 7; | |
| 2962 } | |
| 2963 else | |
| 2964 { | |
| 2965 newSensitivity *= 24; | |
| 2966 newSensitivity = 2400 - newSensitivity; | |
| 2967 newSensitivity /= 10; | |
| 2968 | |
| 2969 newSensitivity += 15; | |
| 2970 if(newSensitivity > 255) | |
| 2971 newSensitivity = 255; | |
| 2972 } | |
| 2973 outArray4Values[i] = newSensitivity; | |
| 2974 } | |
| 2975 | |
| 2976 // the unbalanced value | |
| 2977 newSensitivity = inputValueRaw; | |
| 2978 if(newSensitivity > 100) | |
| 2979 { | |
| 2980 if(newSensitivity <= 105) | |
| 2981 newSensitivity = 10; | |
| 2982 else | |
| 2983 newSensitivity = 7; | |
| 2984 } | |
| 2985 else | |
| 2986 { | |
| 2987 newSensitivity *= 24; | |
| 2988 newSensitivity = 2400 - newSensitivity; | |
| 2989 newSensitivity /= 10; | |
| 2990 | |
| 2991 newSensitivity += 15; | |
| 2992 if(newSensitivity > 255) | |
| 2993 newSensitivity = 255; | |
| 2994 } | |
| 2995 outArray4Values[3] = newSensitivity; | |
| 2996 } | |
| 2997 | |
| 2998 | |
| 2999 /** | |
| 3000 ****************************************************************************** | |
| 3001 * @brief settingsHelperButtonSens_translate_percentage_to_hwOS_values. | |
| 3002 * @author heinrichs weikamp gmbh | |
| 3003 * @version V 01 | |
| 3004 * @date 6-March-2017 | |
| 3005 ****************************************************************************** | |
| 3006 * | |
| 3007 * @param inputValuePercentage with buttonBalance included | |
| 3008 * @retval PIC compatible value | |
| 3009 */ | |
| 3010 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage) | |
| 3011 { | |
| 3012 uint32_t newSensitivity = inputValuePercentage; | |
| 3013 | |
| 3014 if(newSensitivity > 100) | |
| 3015 { | |
| 3016 if(newSensitivity <= 105) | |
| 3017 newSensitivity = 10; | |
| 3018 else | |
| 3019 newSensitivity = 7; | |
| 3020 } | |
| 3021 else | |
| 3022 { | |
| 3023 newSensitivity *= 24; | |
| 3024 newSensitivity = 2400 - newSensitivity; | |
| 3025 newSensitivity /= 10; | |
| 3026 | |
| 3027 newSensitivity += 15; | |
| 3028 if(newSensitivity > 255) | |
| 3029 newSensitivity = 255; | |
| 3030 } | |
| 3031 return (uint8_t)newSensitivity; | |
| 3032 } | |
| 3033 | |
| 3034 | |
| 3035 /** | |
| 3036 ****************************************************************************** | |
| 3037 * @brief settingsHelperButtonSens_translate_hwOS_values_to_percentage. | |
| 3038 * @author heinrichs weikamp gmbh | |
| 3039 * @version V 01 | |
| 3040 * @date 6-March-2017 | |
| 3041 ****************************************************************************** | |
| 3042 * | |
| 3043 * @param PIC compatible value | |
| 3044 * @retval Percentage | |
| 3045 */ | |
| 3046 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC) | |
| 3047 { | |
| 3048 if(inputValuePIC >= 15) | |
| 3049 { | |
| 3050 return(uint8_t)((25500 - (inputValuePIC)*100) / 240); | |
| 3051 } | |
| 3052 else | |
| 3053 { | |
| 3054 if(inputValuePIC >= 10) | |
| 3055 { | |
| 3056 return 105; | |
| 3057 } | |
| 3058 else | |
| 3059 { | |
| 3060 return 110; | |
| 3061 } | |
| 3062 } | |
| 3063 } | |
| 662 | 3064 |
| 3065 void reset_SettingWarning() | |
| 3066 { | |
| 3067 settingsWarning = 0; | |
| 3068 } | |
| 3069 inline uint8_t isSettingsWarning() | |
| 3070 { | |
| 3071 return settingsWarning; | |
| 3072 } | |
| 3073 |