annotate wiki/Detailed CPU1-Upper Project.md @ 757:39ff186b6f98
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
The DiveO2 sensor provides a status information which may be used to identify if the value is valid or not. The sensor does not provide a voltage => to have a value for the voltage the value of the ppo2 is taken (equals calibration coeff of 1). For the analog out of bounds detection this value is too high and the DiveO2 is marked as out of bounds. To avoid this problem DiveO2 sensors are now excluded from the analog out of bounds detection.
| author |
Ideenmodellierer |
| date |
Tue, 07 Mar 2023 22:14:20 +0100 |
| parents |
5f11787b4f42 |
| children |
|
| rev |
line source |
|
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
|
2
|
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
|
6
|
|
|
7 ## Make a specific project ##
|
|
|
8
|
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
|
10
|
|
|
11 **
|
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
|
13 **
|
