annotate wiki/Detailed CPU1-Upper Project.md @ 952:33e24b77cc6c
Evo_2_23
Bugfix ppo2 high/low check in OC mode:
The fallback option which is used in CC mode was applied to the OC mode as well. As result the check could be deactivated depending on the fallback state, even if a OC dive is performed. now the check will always be performed if the dive mode is OC.
Added vibration warning:
The internal buzzer of the GPIO_V2 may now be used as additional warning notificator. It can be activated using the check button in the customer view menu. The vibration will be active while the warning message is displayed in the dive window. In case the diver is in the menu then the warning will be active for a shorter duration.
| author |
Ideenmodellierer |
| date |
Sun, 29 Dec 2024 18:33:02 +0100 |
| parents |
5f11787b4f42 |
| children |
|
| rev |
line source |
|
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
|
2
|
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
|
6
|
|
|
7 ## Make a specific project ##
|
|
|
8
|
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
|
10
|
|
|
11 **
|
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
|
13 **
|
